/* LIBGIMP - The GIMP Library * Copyright (C) 1995-2003 Peter Mattis and Spencer Kimball * * gimpimageselect_pdb.c * * This library is free software: you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 3 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library. If not, see * . */ /* NOTE: This file is auto-generated by pdbgen.pl */ #include "config.h" #include "gimp.h" /** * SECTION: gimpimageselect * @title: gimpimageselect * @short_description: Modify the image's selection. * * Functions to modify the image's selection. **/ /** * gimp_image_select_color: * @image_ID: The affected image. * @operation: The selection operation. * @drawable_ID: The affected drawable. * @color: The color to select. * * Create a selection by selecting all pixels (in the specified * drawable) with the same (or similar) color to that specified. * * This tool creates a selection over the specified image. A by-color * selection is determined by the supplied color under the constraints * of the current context settings. Essentially, all pixels (in the * drawable) that have color sufficiently close to the specified color * (as determined by the threshold and criterion context values) are * included in the selection. To select transparent regions, the color * specified must also have minimum alpha. * * This procedure is affected by the following context setters: * gimp_context_set_antialias(), gimp_context_set_feather(), * gimp_context_set_feather_radius(), gimp_context_set_sample_merged(), * gimp_context_set_sample_criterion(), * gimp_context_set_sample_threshold(), * gimp_context_set_sample_transparent(). * * In the case of a merged sampling, the supplied drawable is ignored. * * Returns: TRUE on success. * * Since: 2.8 **/ gboolean gimp_image_select_color (gint32 image_ID, GimpChannelOps operation, gint32 drawable_ID, const GimpRGB *color) { GimpParam *return_vals; gint nreturn_vals; gboolean success = TRUE; return_vals = gimp_run_procedure ("gimp-image-select-color", &nreturn_vals, GIMP_PDB_IMAGE, image_ID, GIMP_PDB_INT32, operation, GIMP_PDB_DRAWABLE, drawable_ID, GIMP_PDB_COLOR, color, GIMP_PDB_END); success = return_vals[0].data.d_status == GIMP_PDB_SUCCESS; gimp_destroy_params (return_vals, nreturn_vals); return success; } /** * gimp_image_select_contiguous_color: * @image_ID: The affected image. * @operation: The selection operation. * @drawable_ID: The affected drawable. * @x: x coordinate of initial seed fill point: (image coordinates). * @y: y coordinate of initial seed fill point: (image coordinates). * * Create a selection by selecting all pixels around specified * coordinates with the same (or similar) color to that at the * coordinates. * * This tool creates a contiguous selection over the specified image. A * contiguous color selection is determined by a seed fill under the * constraints of the current context settings. Essentially, the color * at the specified coordinates (in the drawable) is measured and the * selection expands outwards from that point to any adjacent pixels * which are not significantly different (as determined by the * threshold and criterion context settings). This process continues * until no more expansion is possible. If antialiasing is turned on, * the final selection mask will contain intermediate values based on * close misses to the threshold bar at pixels along the seed fill * boundary. * * This procedure is affected by the following context setters: * gimp_context_set_antialias(), gimp_context_set_feather(), * gimp_context_set_feather_radius(), gimp_context_set_sample_merged(), * gimp_context_set_sample_criterion(), * gimp_context_set_sample_threshold(), * gimp_context_set_sample_transparent(), * gimp_context_set_diagonal_neighbors(). * * In the case of a merged sampling, the supplied drawable is ignored. * If the sample is merged, the specified coordinates are relative to * the image origin; otherwise, they are relative to the drawable's * origin. * * Returns: TRUE on success. * * Since: 2.8 **/ gboolean gimp_image_select_contiguous_color (gint32 image_ID, GimpChannelOps operation, gint32 drawable_ID, gdouble x, gdouble y) { GimpParam *return_vals; gint nreturn_vals; gboolean success = TRUE; return_vals = gimp_run_procedure ("gimp-image-select-contiguous-color", &nreturn_vals, GIMP_PDB_IMAGE, image_ID, GIMP_PDB_INT32, operation, GIMP_PDB_DRAWABLE, drawable_ID, GIMP_PDB_FLOAT, x, GIMP_PDB_FLOAT, y, GIMP_PDB_END); success = return_vals[0].data.d_status == GIMP_PDB_SUCCESS; gimp_destroy_params (return_vals, nreturn_vals); return success; } /** * gimp_image_select_rectangle: * @image_ID: The image. * @operation: The selection operation. * @x: x coordinate of upper-left corner of rectangle. * @y: y coordinate of upper-left corner of rectangle. * @width: The width of the rectangle. * @height: The height of the rectangle. * * Create a rectangular selection over the specified image; * * This tool creates a rectangular selection over the specified image. * The rectangular region can be either added to, subtracted from, or * replace the contents of the previous selection mask. * * This procedure is affected by the following context setters: * gimp_context_set_feather(), gimp_context_set_feather_radius(). * * Returns: TRUE on success. * * Since: 2.8 **/ gboolean gimp_image_select_rectangle (gint32 image_ID, GimpChannelOps operation, gdouble x, gdouble y, gdouble width, gdouble height) { GimpParam *return_vals; gint nreturn_vals; gboolean success = TRUE; return_vals = gimp_run_procedure ("gimp-image-select-rectangle", &nreturn_vals, GIMP_PDB_IMAGE, image_ID, GIMP_PDB_INT32, operation, GIMP_PDB_FLOAT, x, GIMP_PDB_FLOAT, y, GIMP_PDB_FLOAT, width, GIMP_PDB_FLOAT, height, GIMP_PDB_END); success = return_vals[0].data.d_status == GIMP_PDB_SUCCESS; gimp_destroy_params (return_vals, nreturn_vals); return success; } /** * gimp_image_select_round_rectangle: * @image_ID: The image. * @operation: The selection operation. * @x: x coordinate of upper-left corner of rectangle. * @y: y coordinate of upper-left corner of rectangle. * @width: The width of the rectangle. * @height: The height of the rectangle. * @corner_radius_x: The corner radius in X direction. * @corner_radius_y: The corner radius in Y direction. * * Create a rectangular selection with round corners over the specified * image; * * This tool creates a rectangular selection with round corners over * the specified image. The rectangular region can be either added to, * subtracted from, or replace the contents of the previous selection * mask. * * This procedure is affected by the following context setters: * gimp_context_set_antialias(), gimp_context_set_feather(), * gimp_context_set_feather_radius(). * * Returns: TRUE on success. * * Since: 2.8 **/ gboolean gimp_image_select_round_rectangle (gint32 image_ID, GimpChannelOps operation, gdouble x, gdouble y, gdouble width, gdouble height, gdouble corner_radius_x, gdouble corner_radius_y) { GimpParam *return_vals; gint nreturn_vals; gboolean success = TRUE; return_vals = gimp_run_procedure ("gimp-image-select-round-rectangle", &nreturn_vals, GIMP_PDB_IMAGE, image_ID, GIMP_PDB_INT32, operation, GIMP_PDB_FLOAT, x, GIMP_PDB_FLOAT, y, GIMP_PDB_FLOAT, width, GIMP_PDB_FLOAT, height, GIMP_PDB_FLOAT, corner_radius_x, GIMP_PDB_FLOAT, corner_radius_y, GIMP_PDB_END); success = return_vals[0].data.d_status == GIMP_PDB_SUCCESS; gimp_destroy_params (return_vals, nreturn_vals); return success; } /** * gimp_image_select_ellipse: * @image_ID: The image. * @operation: The selection operation. * @x: x coordinate of upper-left corner of ellipse bounding box. * @y: y coordinate of upper-left corner of ellipse bounding box. * @width: The width of the ellipse. * @height: The height of the ellipse. * * Create an elliptical selection over the specified image. * * This tool creates an elliptical selection over the specified image. * The elliptical region can be either added to, subtracted from, or * replace the contents of the previous selection mask. * * This procedure is affected by the following context setters: * gimp_context_set_antialias(), gimp_context_set_feather(), * gimp_context_set_feather_radius(). * * Returns: TRUE on success. * * Since: 2.8 **/ gboolean gimp_image_select_ellipse (gint32 image_ID, GimpChannelOps operation, gdouble x, gdouble y, gdouble width, gdouble height) { GimpParam *return_vals; gint nreturn_vals; gboolean success = TRUE; return_vals = gimp_run_procedure ("gimp-image-select-ellipse", &nreturn_vals, GIMP_PDB_IMAGE, image_ID, GIMP_PDB_INT32, operation, GIMP_PDB_FLOAT, x, GIMP_PDB_FLOAT, y, GIMP_PDB_FLOAT, width, GIMP_PDB_FLOAT, height, GIMP_PDB_END); success = return_vals[0].data.d_status == GIMP_PDB_SUCCESS; gimp_destroy_params (return_vals, nreturn_vals); return success; } /** * gimp_image_select_polygon: * @image_ID: The image. * @operation: The selection operation. * @num_segs: Number of points (count 1 coordinate as two points). * @segs: Array of points: { p1.x, p1.y, p2.x, p2.y, ..., pn.x, pn.y}. * * Create a polygonal selection over the specified image. * * This tool creates a polygonal selection over the specified image. * The polygonal region can be either added to, subtracted from, or * replace the contents of the previous selection mask. The polygon is * specified through an array of floating point numbers and its length. * The length of array must be 2n, where n is the number of points. * Each point is defined by 2 floating point values which correspond to * the x and y coordinates. If the final point does not connect to the * starting point, a connecting segment is automatically added. * * This procedure is affected by the following context setters: * gimp_context_set_antialias(), gimp_context_set_feather(), * gimp_context_set_feather_radius(). * * Returns: TRUE on success. * * Since: 2.8 **/ gboolean gimp_image_select_polygon (gint32 image_ID, GimpChannelOps operation, gint num_segs, const gdouble *segs) { GimpParam *return_vals; gint nreturn_vals; gboolean success = TRUE; return_vals = gimp_run_procedure ("gimp-image-select-polygon", &nreturn_vals, GIMP_PDB_IMAGE, image_ID, GIMP_PDB_INT32, operation, GIMP_PDB_INT32, num_segs, GIMP_PDB_FLOATARRAY, segs, GIMP_PDB_END); success = return_vals[0].data.d_status == GIMP_PDB_SUCCESS; gimp_destroy_params (return_vals, nreturn_vals); return success; } /** * gimp_image_select_item: * @image_ID: The image. * @operation: The desired operation with current selection. * @item_ID: The item to render to the selection. * * Transforms the specified item into a selection * * This procedure renders the item's outline into the current selection * of the image the item belongs to. What exactly the item's outline is * depends on the item type: for layers, it's the layer's alpha * channel, for vectors the vector's shape. * * This procedure is affected by the following context setters: * gimp_context_set_antialias(), gimp_context_set_feather(), * gimp_context_set_feather_radius(). * * Returns: TRUE on success. * * Since: 2.8 **/ gboolean gimp_image_select_item (gint32 image_ID, GimpChannelOps operation, gint32 item_ID) { GimpParam *return_vals; gint nreturn_vals; gboolean success = TRUE; return_vals = gimp_run_procedure ("gimp-image-select-item", &nreturn_vals, GIMP_PDB_IMAGE, image_ID, GIMP_PDB_INT32, operation, GIMP_PDB_ITEM, item_ID, GIMP_PDB_END); success = return_vals[0].data.d_status == GIMP_PDB_SUCCESS; gimp_destroy_params (return_vals, nreturn_vals); return success; }