summaryrefslogtreecommitdiffstats
path: root/Documentation/diff-options.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/diff-options.txt')
-rw-r--r--Documentation/diff-options.txt861
1 files changed, 861 insertions, 0 deletions
diff --git a/Documentation/diff-options.txt b/Documentation/diff-options.txt
new file mode 100644
index 0000000..3674ac4
--- /dev/null
+++ b/Documentation/diff-options.txt
@@ -0,0 +1,861 @@
+// Please don't remove this comment as asciidoc behaves badly when
+// the first non-empty line is ifdef/ifndef. The symptom is that
+// without this comment the <git-diff-core> attribute conditionally
+// defined below ends up being defined unconditionally.
+// Last checked with asciidoc 7.0.2.
+
+ifndef::git-format-patch[]
+ifndef::git-diff[]
+ifndef::git-log[]
+:git-diff-core: 1
+endif::git-log[]
+endif::git-diff[]
+endif::git-format-patch[]
+
+ifdef::git-format-patch[]
+-p::
+--no-stat::
+ Generate plain patches without any diffstats.
+endif::git-format-patch[]
+
+ifndef::git-format-patch[]
+-p::
+-u::
+--patch::
+ Generate patch (see section on generating patches).
+ifdef::git-diff[]
+ This is the default.
+endif::git-diff[]
+
+-s::
+--no-patch::
+ Suppress diff output. Useful for commands like `git show` that
+ show the patch by default, or to cancel the effect of `--patch`.
+endif::git-format-patch[]
+
+ifdef::git-log[]
+--diff-merges=(off|none|on|first-parent|1|separate|m|combined|c|dense-combined|cc|remerge|r)::
+--no-diff-merges::
+ Specify diff format to be used for merge commits. Default is
+ {diff-merges-default} unless `--first-parent` is in use, in which case
+ `first-parent` is the default.
++
+--diff-merges=(off|none):::
+--no-diff-merges:::
+ Disable output of diffs for merge commits. Useful to override
+ implied value.
++
+--diff-merges=on:::
+--diff-merges=m:::
+-m:::
+ This option makes diff output for merge commits to be shown in
+ the default format. `-m` will produce the output only if `-p`
+ is given as well. The default format could be changed using
+ `log.diffMerges` configuration parameter, which default value
+ is `separate`.
++
+--diff-merges=first-parent:::
+--diff-merges=1:::
+ This option makes merge commits show the full diff with
+ respect to the first parent only.
++
+--diff-merges=separate:::
+ This makes merge commits show the full diff with respect to
+ each of the parents. Separate log entry and diff is generated
+ for each parent.
++
+--diff-merges=remerge:::
+--diff-merges=r:::
+--remerge-diff:::
+ With this option, two-parent merge commits are remerged to
+ create a temporary tree object -- potentially containing files
+ with conflict markers and such. A diff is then shown between
+ that temporary tree and the actual merge commit.
++
+The output emitted when this option is used is subject to change, and
+so is its interaction with other options (unless explicitly
+documented).
++
+--diff-merges=combined:::
+--diff-merges=c:::
+-c:::
+ With this option, diff output for a merge commit shows the
+ differences from each of the parents to the merge result
+ simultaneously instead of showing pairwise diff between a
+ parent and the result one at a time. Furthermore, it lists
+ only files which were modified from all parents. `-c` implies
+ `-p`.
++
+--diff-merges=dense-combined:::
+--diff-merges=cc:::
+--cc:::
+ With this option the output produced by
+ `--diff-merges=combined` is further compressed by omitting
+ uninteresting hunks whose contents in the parents have only
+ two variants and the merge result picks one of them without
+ modification. `--cc` implies `-p`.
+
+--combined-all-paths::
+ This flag causes combined diffs (used for merge commits) to
+ list the name of the file from all parents. It thus only has
+ effect when `--diff-merges=[dense-]combined` is in use, and
+ is likely only useful if filename changes are detected (i.e.
+ when either rename or copy detection have been requested).
+endif::git-log[]
+
+-U<n>::
+--unified=<n>::
+ Generate diffs with <n> lines of context instead of
+ the usual three.
+ifndef::git-format-patch[]
+ Implies `--patch`.
+endif::git-format-patch[]
+
+--output=<file>::
+ Output to a specific file instead of stdout.
+
+--output-indicator-new=<char>::
+--output-indicator-old=<char>::
+--output-indicator-context=<char>::
+ Specify the character used to indicate new, old or context
+ lines in the generated patch. Normally they are '+', '-' and
+ ' ' respectively.
+
+ifndef::git-format-patch[]
+--raw::
+ifndef::git-log[]
+ Generate the diff in raw format.
+ifdef::git-diff-core[]
+ This is the default.
+endif::git-diff-core[]
+endif::git-log[]
+ifdef::git-log[]
+ For each commit, show a summary of changes using the raw diff
+ format. See the "RAW OUTPUT FORMAT" section of
+ linkgit:git-diff[1]. This is different from showing the log
+ itself in raw format, which you can achieve with
+ `--format=raw`.
+endif::git-log[]
+endif::git-format-patch[]
+
+ifndef::git-format-patch[]
+--patch-with-raw::
+ Synonym for `-p --raw`.
+endif::git-format-patch[]
+
+ifdef::git-log[]
+-t::
+ Show the tree objects in the diff output.
+endif::git-log[]
+
+--indent-heuristic::
+ Enable the heuristic that shifts diff hunk boundaries to make patches
+ easier to read. This is the default.
+
+--no-indent-heuristic::
+ Disable the indent heuristic.
+
+--minimal::
+ Spend extra time to make sure the smallest possible
+ diff is produced.
+
+--patience::
+ Generate a diff using the "patience diff" algorithm.
+
+--histogram::
+ Generate a diff using the "histogram diff" algorithm.
+
+--anchored=<text>::
+ Generate a diff using the "anchored diff" algorithm.
++
+This option may be specified more than once.
++
+If a line exists in both the source and destination, exists only once,
+and starts with this text, this algorithm attempts to prevent it from
+appearing as a deletion or addition in the output. It uses the "patience
+diff" algorithm internally.
+
+--diff-algorithm={patience|minimal|histogram|myers}::
+ Choose a diff algorithm. The variants are as follows:
++
+--
+`default`, `myers`;;
+ The basic greedy diff algorithm. Currently, this is the default.
+`minimal`;;
+ Spend extra time to make sure the smallest possible diff is
+ produced.
+`patience`;;
+ Use "patience diff" algorithm when generating patches.
+`histogram`;;
+ This algorithm extends the patience algorithm to "support
+ low-occurrence common elements".
+--
++
+For instance, if you configured the `diff.algorithm` variable to a
+non-default value and want to use the default one, then you
+have to use `--diff-algorithm=default` option.
+
+--stat[=<width>[,<name-width>[,<count>]]]::
+ Generate a diffstat. By default, as much space as necessary
+ will be used for the filename part, and the rest for the graph
+ part. Maximum width defaults to terminal width, or 80 columns
+ if not connected to a terminal, and can be overridden by
+ `<width>`. The width of the filename part can be limited by
+ giving another width `<name-width>` after a comma. The width
+ of the graph part can be limited by using
+ `--stat-graph-width=<width>` (affects all commands generating
+ a stat graph) or by setting `diff.statGraphWidth=<width>`
+ (does not affect `git format-patch`).
+ By giving a third parameter `<count>`, you can limit the
+ output to the first `<count>` lines, followed by `...` if
+ there are more.
++
+These parameters can also be set individually with `--stat-width=<width>`,
+`--stat-name-width=<name-width>` and `--stat-count=<count>`.
+
+--compact-summary::
+ Output a condensed summary of extended header information such
+ as file creations or deletions ("new" or "gone", optionally "+l"
+ if it's a symlink) and mode changes ("+x" or "-x" for adding
+ or removing executable bit respectively) in diffstat. The
+ information is put between the filename part and the graph
+ part. Implies `--stat`.
+
+--numstat::
+ Similar to `--stat`, but shows number of added and
+ deleted lines in decimal notation and pathname without
+ abbreviation, to make it more machine friendly. For
+ binary files, outputs two `-` instead of saying
+ `0 0`.
+
+--shortstat::
+ Output only the last line of the `--stat` format containing total
+ number of modified files, as well as number of added and deleted
+ lines.
+
+-X[<param1,param2,...>]::
+--dirstat[=<param1,param2,...>]::
+ Output the distribution of relative amount of changes for each
+ sub-directory. The behavior of `--dirstat` can be customized by
+ passing it a comma separated list of parameters.
+ The defaults are controlled by the `diff.dirstat` configuration
+ variable (see linkgit:git-config[1]).
+ The following parameters are available:
++
+--
+`changes`;;
+ Compute the dirstat numbers by counting the lines that have been
+ removed from the source, or added to the destination. This ignores
+ the amount of pure code movements within a file. In other words,
+ rearranging lines in a file is not counted as much as other changes.
+ This is the default behavior when no parameter is given.
+`lines`;;
+ Compute the dirstat numbers by doing the regular line-based diff
+ analysis, and summing the removed/added line counts. (For binary
+ files, count 64-byte chunks instead, since binary files have no
+ natural concept of lines). This is a more expensive `--dirstat`
+ behavior than the `changes` behavior, but it does count rearranged
+ lines within a file as much as other changes. The resulting output
+ is consistent with what you get from the other `--*stat` options.
+`files`;;
+ Compute the dirstat numbers by counting the number of files changed.
+ Each changed file counts equally in the dirstat analysis. This is
+ the computationally cheapest `--dirstat` behavior, since it does
+ not have to look at the file contents at all.
+`cumulative`;;
+ Count changes in a child directory for the parent directory as well.
+ Note that when using `cumulative`, the sum of the percentages
+ reported may exceed 100%. The default (non-cumulative) behavior can
+ be specified with the `noncumulative` parameter.
+<limit>;;
+ An integer parameter specifies a cut-off percent (3% by default).
+ Directories contributing less than this percentage of the changes
+ are not shown in the output.
+--
++
+Example: The following will count changed files, while ignoring
+directories with less than 10% of the total amount of changed files,
+and accumulating child directory counts in the parent directories:
+`--dirstat=files,10,cumulative`.
+
+--cumulative::
+ Synonym for --dirstat=cumulative
+
+--dirstat-by-file[=<param1,param2>...]::
+ Synonym for --dirstat=files,param1,param2...
+
+--summary::
+ Output a condensed summary of extended header information
+ such as creations, renames and mode changes.
+
+ifndef::git-format-patch[]
+--patch-with-stat::
+ Synonym for `-p --stat`.
+endif::git-format-patch[]
+
+ifndef::git-format-patch[]
+
+-z::
+ifdef::git-log[]
+ Separate the commits with NULs instead of with new newlines.
++
+Also, when `--raw` or `--numstat` has been given, do not munge
+pathnames and use NULs as output field terminators.
+endif::git-log[]
+ifndef::git-log[]
+ When `--raw`, `--numstat`, `--name-only` or `--name-status` has been
+ given, do not munge pathnames and use NULs as output field terminators.
+endif::git-log[]
++
+Without this option, pathnames with "unusual" characters are quoted as
+explained for the configuration variable `core.quotePath` (see
+linkgit:git-config[1]).
+
+--name-only::
+ Show only names of changed files. The file names are often encoded in UTF-8.
+ For more information see the discussion about encoding in the linkgit:git-log[1]
+ manual page.
+
+--name-status::
+ Show only names and status of changed files. See the description
+ of the `--diff-filter` option on what the status letters mean.
+ Just like `--name-only` the file names are often encoded in UTF-8.
+
+--submodule[=<format>]::
+ Specify how differences in submodules are shown. When specifying
+ `--submodule=short` the 'short' format is used. This format just
+ shows the names of the commits at the beginning and end of the range.
+ When `--submodule` or `--submodule=log` is specified, the 'log'
+ format is used. This format lists the commits in the range like
+ linkgit:git-submodule[1] `summary` does. When `--submodule=diff`
+ is specified, the 'diff' format is used. This format shows an
+ inline diff of the changes in the submodule contents between the
+ commit range. Defaults to `diff.submodule` or the 'short' format
+ if the config option is unset.
+
+--color[=<when>]::
+ Show colored diff.
+ `--color` (i.e. without '=<when>') is the same as `--color=always`.
+ '<when>' can be one of `always`, `never`, or `auto`.
+ifdef::git-diff[]
+ It can be changed by the `color.ui` and `color.diff`
+ configuration settings.
+endif::git-diff[]
+
+--no-color::
+ Turn off colored diff.
+ifdef::git-diff[]
+ This can be used to override configuration settings.
+endif::git-diff[]
+ It is the same as `--color=never`.
+
+--color-moved[=<mode>]::
+ Moved lines of code are colored differently.
+ifdef::git-diff[]
+ It can be changed by the `diff.colorMoved` configuration setting.
+endif::git-diff[]
+ The <mode> defaults to 'no' if the option is not given
+ and to 'zebra' if the option with no mode is given.
+ The mode must be one of:
++
+--
+no::
+ Moved lines are not highlighted.
+default::
+ Is a synonym for `zebra`. This may change to a more sensible mode
+ in the future.
+plain::
+ Any line that is added in one location and was removed
+ in another location will be colored with 'color.diff.newMoved'.
+ Similarly 'color.diff.oldMoved' will be used for removed lines
+ that are added somewhere else in the diff. This mode picks up any
+ moved line, but it is not very useful in a review to determine
+ if a block of code was moved without permutation.
+blocks::
+ Blocks of moved text of at least 20 alphanumeric characters
+ are detected greedily. The detected blocks are
+ painted using either the 'color.diff.{old,new}Moved' color.
+ Adjacent blocks cannot be told apart.
+zebra::
+ Blocks of moved text are detected as in 'blocks' mode. The blocks
+ are painted using either the 'color.diff.{old,new}Moved' color or
+ 'color.diff.{old,new}MovedAlternative'. The change between
+ the two colors indicates that a new block was detected.
+dimmed-zebra::
+ Similar to 'zebra', but additional dimming of uninteresting parts
+ of moved code is performed. The bordering lines of two adjacent
+ blocks are considered interesting, the rest is uninteresting.
+ `dimmed_zebra` is a deprecated synonym.
+--
+
+--no-color-moved::
+ Turn off move detection. This can be used to override configuration
+ settings. It is the same as `--color-moved=no`.
+
+--color-moved-ws=<modes>::
+ This configures how whitespace is ignored when performing the
+ move detection for `--color-moved`.
+ifdef::git-diff[]
+ It can be set by the `diff.colorMovedWS` configuration setting.
+endif::git-diff[]
+ These modes can be given as a comma separated list:
++
+--
+no::
+ Do not ignore whitespace when performing move detection.
+ignore-space-at-eol::
+ Ignore changes in whitespace at EOL.
+ignore-space-change::
+ Ignore changes in amount of whitespace. This ignores whitespace
+ at line end, and considers all other sequences of one or
+ more whitespace characters to be equivalent.
+ignore-all-space::
+ Ignore whitespace when comparing lines. This ignores differences
+ even if one line has whitespace where the other line has none.
+allow-indentation-change::
+ Initially ignore any whitespace in the move detection, then
+ group the moved code blocks only into a block if the change in
+ whitespace is the same per line. This is incompatible with the
+ other modes.
+--
+
+--no-color-moved-ws::
+ Do not ignore whitespace when performing move detection. This can be
+ used to override configuration settings. It is the same as
+ `--color-moved-ws=no`.
+
+--word-diff[=<mode>]::
+ Show a word diff, using the <mode> to delimit changed words.
+ By default, words are delimited by whitespace; see
+ `--word-diff-regex` below. The <mode> defaults to 'plain', and
+ must be one of:
++
+--
+color::
+ Highlight changed words using only colors. Implies `--color`.
+plain::
+ Show words as `[-removed-]` and `{+added+}`. Makes no
+ attempts to escape the delimiters if they appear in the input,
+ so the output may be ambiguous.
+porcelain::
+ Use a special line-based format intended for script
+ consumption. Added/removed/unchanged runs are printed in the
+ usual unified diff format, starting with a `+`/`-`/` `
+ character at the beginning of the line and extending to the
+ end of the line. Newlines in the input are represented by a
+ tilde `~` on a line of its own.
+none::
+ Disable word diff again.
+--
++
+Note that despite the name of the first mode, color is used to
+highlight the changed parts in all modes if enabled.
+
+--word-diff-regex=<regex>::
+ Use <regex> to decide what a word is, instead of considering
+ runs of non-whitespace to be a word. Also implies
+ `--word-diff` unless it was already enabled.
++
+Every non-overlapping match of the
+<regex> is considered a word. Anything between these matches is
+considered whitespace and ignored(!) for the purposes of finding
+differences. You may want to append `|[^[:space:]]` to your regular
+expression to make sure that it matches all non-whitespace characters.
+A match that contains a newline is silently truncated(!) at the
+newline.
++
+For example, `--word-diff-regex=.` will treat each character as a word
+and, correspondingly, show differences character by character.
++
+The regex can also be set via a diff driver or configuration option, see
+linkgit:gitattributes[5] or linkgit:git-config[1]. Giving it explicitly
+overrides any diff driver or configuration setting. Diff drivers
+override configuration settings.
+
+--color-words[=<regex>]::
+ Equivalent to `--word-diff=color` plus (if a regex was
+ specified) `--word-diff-regex=<regex>`.
+endif::git-format-patch[]
+
+--no-renames::
+ Turn off rename detection, even when the configuration
+ file gives the default to do so.
+
+--[no-]rename-empty::
+ Whether to use empty blobs as rename source.
+
+ifndef::git-format-patch[]
+--check::
+ Warn if changes introduce conflict markers or whitespace errors.
+ What are considered whitespace errors is controlled by `core.whitespace`
+ configuration. By default, trailing whitespaces (including
+ lines that consist solely of whitespaces) and a space character
+ that is immediately followed by a tab character inside the
+ initial indent of the line are considered whitespace errors.
+ Exits with non-zero status if problems are found. Not compatible
+ with --exit-code.
+
+--ws-error-highlight=<kind>::
+ Highlight whitespace errors in the `context`, `old` or `new`
+ lines of the diff. Multiple values are separated by comma,
+ `none` resets previous values, `default` reset the list to
+ `new` and `all` is a shorthand for `old,new,context`. When
+ this option is not given, and the configuration variable
+ `diff.wsErrorHighlight` is not set, only whitespace errors in
+ `new` lines are highlighted. The whitespace errors are colored
+ with `color.diff.whitespace`.
+
+endif::git-format-patch[]
+
+--full-index::
+ Instead of the first handful of characters, show the full
+ pre- and post-image blob object names on the "index"
+ line when generating patch format output.
+
+--binary::
+ In addition to `--full-index`, output a binary diff that
+ can be applied with `git-apply`.
+ifndef::git-format-patch[]
+ Implies `--patch`.
+endif::git-format-patch[]
+
+--abbrev[=<n>]::
+ Instead of showing the full 40-byte hexadecimal object
+ name in diff-raw format output and diff-tree header
+ lines, show the shortest prefix that is at least '<n>'
+ hexdigits long that uniquely refers the object.
+ In diff-patch output format, `--full-index` takes higher
+ precedence, i.e. if `--full-index` is specified, full blob
+ names will be shown regardless of `--abbrev`.
+ Non default number of digits can be specified with `--abbrev=<n>`.
+
+-B[<n>][/<m>]::
+--break-rewrites[=[<n>][/<m>]]::
+ Break complete rewrite changes into pairs of delete and
+ create. This serves two purposes:
++
+It affects the way a change that amounts to a total rewrite of a file
+not as a series of deletion and insertion mixed together with a very
+few lines that happen to match textually as the context, but as a
+single deletion of everything old followed by a single insertion of
+everything new, and the number `m` controls this aspect of the -B
+option (defaults to 60%). `-B/70%` specifies that less than 30% of the
+original should remain in the result for Git to consider it a total
+rewrite (i.e. otherwise the resulting patch will be a series of
+deletion and insertion mixed together with context lines).
++
+When used with -M, a totally-rewritten file is also considered as the
+source of a rename (usually -M only considers a file that disappeared
+as the source of a rename), and the number `n` controls this aspect of
+the -B option (defaults to 50%). `-B20%` specifies that a change with
+addition and deletion compared to 20% or more of the file's size are
+eligible for being picked up as a possible source of a rename to
+another file.
+
+-M[<n>]::
+--find-renames[=<n>]::
+ifndef::git-log[]
+ Detect renames.
+endif::git-log[]
+ifdef::git-log[]
+ If generating diffs, detect and report renames for each commit.
+ For following files across renames while traversing history, see
+ `--follow`.
+endif::git-log[]
+ If `n` is specified, it is a threshold on the similarity
+ index (i.e. amount of addition/deletions compared to the
+ file's size). For example, `-M90%` means Git should consider a
+ delete/add pair to be a rename if more than 90% of the file
+ hasn't changed. Without a `%` sign, the number is to be read as
+ a fraction, with a decimal point before it. I.e., `-M5` becomes
+ 0.5, and is thus the same as `-M50%`. Similarly, `-M05` is
+ the same as `-M5%`. To limit detection to exact renames, use
+ `-M100%`. The default similarity index is 50%.
+
+-C[<n>]::
+--find-copies[=<n>]::
+ Detect copies as well as renames. See also `--find-copies-harder`.
+ If `n` is specified, it has the same meaning as for `-M<n>`.
+
+--find-copies-harder::
+ For performance reasons, by default, `-C` option finds copies only
+ if the original file of the copy was modified in the same
+ changeset. This flag makes the command
+ inspect unmodified files as candidates for the source of
+ copy. This is a very expensive operation for large
+ projects, so use it with caution. Giving more than one
+ `-C` option has the same effect.
+
+-D::
+--irreversible-delete::
+ Omit the preimage for deletes, i.e. print only the header but not
+ the diff between the preimage and `/dev/null`. The resulting patch
+ is not meant to be applied with `patch` or `git apply`; this is
+ solely for people who want to just concentrate on reviewing the
+ text after the change. In addition, the output obviously lacks
+ enough information to apply such a patch in reverse, even manually,
+ hence the name of the option.
++
+When used together with `-B`, omit also the preimage in the deletion part
+of a delete/create pair.
+
+-l<num>::
+ The `-M` and `-C` options involve some preliminary steps that
+ can detect subsets of renames/copies cheaply, followed by an
+ exhaustive fallback portion that compares all remaining
+ unpaired destinations to all relevant sources. (For renames,
+ only remaining unpaired sources are relevant; for copies, all
+ original sources are relevant.) For N sources and
+ destinations, this exhaustive check is O(N^2). This option
+ prevents the exhaustive portion of rename/copy detection from
+ running if the number of source/destination files involved
+ exceeds the specified number. Defaults to diff.renameLimit.
+ Note that a value of 0 is treated as unlimited.
+
+ifndef::git-format-patch[]
+--diff-filter=[(A|C|D|M|R|T|U|X|B)...[*]]::
+ Select only files that are Added (`A`), Copied (`C`),
+ Deleted (`D`), Modified (`M`), Renamed (`R`), have their
+ type (i.e. regular file, symlink, submodule, ...) changed (`T`),
+ are Unmerged (`U`), are
+ Unknown (`X`), or have had their pairing Broken (`B`).
+ Any combination of the filter characters (including none) can be used.
+ When `*` (All-or-none) is added to the combination, all
+ paths are selected if there is any file that matches
+ other criteria in the comparison; if there is no file
+ that matches other criteria, nothing is selected.
++
+Also, these upper-case letters can be downcased to exclude. E.g.
+`--diff-filter=ad` excludes added and deleted paths.
++
+Note that not all diffs can feature all types. For instance, copied and
+renamed entries cannot appear if detection for those types is disabled.
+
+-S<string>::
+ Look for differences that change the number of occurrences of
+ the specified string (i.e. addition/deletion) in a file.
+ Intended for the scripter's use.
++
+It is useful when you're looking for an exact block of code (like a
+struct), and want to know the history of that block since it first
+came into being: use the feature iteratively to feed the interesting
+block in the preimage back into `-S`, and keep going until you get the
+very first version of the block.
++
+Binary files are searched as well.
+
+-G<regex>::
+ Look for differences whose patch text contains added/removed
+ lines that match <regex>.
++
+To illustrate the difference between `-S<regex> --pickaxe-regex` and
+`-G<regex>`, consider a commit with the following diff in the same
+file:
++
+----
++ return frotz(nitfol, two->ptr, 1, 0);
+...
+- hit = frotz(nitfol, mf2.ptr, 1, 0);
+----
++
+While `git log -G"frotz\(nitfol"` will show this commit, `git log
+-S"frotz\(nitfol" --pickaxe-regex` will not (because the number of
+occurrences of that string did not change).
++
+Unless `--text` is supplied patches of binary files without a textconv
+filter will be ignored.
++
+See the 'pickaxe' entry in linkgit:gitdiffcore[7] for more
+information.
+
+--find-object=<object-id>::
+ Look for differences that change the number of occurrences of
+ the specified object. Similar to `-S`, just the argument is different
+ in that it doesn't search for a specific string but for a specific
+ object id.
++
+The object can be a blob or a submodule commit. It implies the `-t` option in
+`git-log` to also find trees.
+
+--pickaxe-all::
+ When `-S` or `-G` finds a change, show all the changes in that
+ changeset, not just the files that contain the change
+ in <string>.
+
+--pickaxe-regex::
+ Treat the <string> given to `-S` as an extended POSIX regular
+ expression to match.
+
+endif::git-format-patch[]
+
+-O<orderfile>::
+ Control the order in which files appear in the output.
+ This overrides the `diff.orderFile` configuration variable
+ (see linkgit:git-config[1]). To cancel `diff.orderFile`,
+ use `-O/dev/null`.
++
+The output order is determined by the order of glob patterns in
+<orderfile>.
+All files with pathnames that match the first pattern are output
+first, all files with pathnames that match the second pattern (but not
+the first) are output next, and so on.
+All files with pathnames that do not match any pattern are output
+last, as if there was an implicit match-all pattern at the end of the
+file.
+If multiple pathnames have the same rank (they match the same pattern
+but no earlier patterns), their output order relative to each other is
+the normal order.
++
+<orderfile> is parsed as follows:
++
+--
+ - Blank lines are ignored, so they can be used as separators for
+ readability.
+
+ - Lines starting with a hash ("`#`") are ignored, so they can be used
+ for comments. Add a backslash ("`\`") to the beginning of the
+ pattern if it starts with a hash.
+
+ - Each other line contains a single pattern.
+--
++
+Patterns have the same syntax and semantics as patterns used for
+fnmatch(3) without the FNM_PATHNAME flag, except a pathname also
+matches a pattern if removing any number of the final pathname
+components matches the pattern. For example, the pattern "`foo*bar`"
+matches "`fooasdfbar`" and "`foo/bar/baz/asdf`" but not "`foobarx`".
+
+--skip-to=<file>::
+--rotate-to=<file>::
+ Discard the files before the named <file> from the output
+ (i.e. 'skip to'), or move them to the end of the output
+ (i.e. 'rotate to'). These were invented primarily for use
+ of the `git difftool` command, and may not be very useful
+ otherwise.
+
+ifndef::git-format-patch[]
+-R::
+ Swap two inputs; that is, show differences from index or
+ on-disk file to tree contents.
+endif::git-format-patch[]
+
+--relative[=<path>]::
+--no-relative::
+ When run from a subdirectory of the project, it can be
+ told to exclude changes outside the directory and show
+ pathnames relative to it with this option. When you are
+ not in a subdirectory (e.g. in a bare repository), you
+ can name which subdirectory to make the output relative
+ to by giving a <path> as an argument.
+ `--no-relative` can be used to countermand both `diff.relative` config
+ option and previous `--relative`.
+
+-a::
+--text::
+ Treat all files as text.
+
+--ignore-cr-at-eol::
+ Ignore carriage-return at the end of line when doing a comparison.
+
+--ignore-space-at-eol::
+ Ignore changes in whitespace at EOL.
+
+-b::
+--ignore-space-change::
+ Ignore changes in amount of whitespace. This ignores whitespace
+ at line end, and considers all other sequences of one or
+ more whitespace characters to be equivalent.
+
+-w::
+--ignore-all-space::
+ Ignore whitespace when comparing lines. This ignores
+ differences even if one line has whitespace where the other
+ line has none.
+
+--ignore-blank-lines::
+ Ignore changes whose lines are all blank.
+
+-I<regex>::
+--ignore-matching-lines=<regex>::
+ Ignore changes whose all lines match <regex>. This option may
+ be specified more than once.
+
+--inter-hunk-context=<lines>::
+ Show the context between diff hunks, up to the specified number
+ of lines, thereby fusing hunks that are close to each other.
+ Defaults to `diff.interHunkContext` or 0 if the config option
+ is unset.
+
+-W::
+--function-context::
+ Show whole function as context lines for each change.
+ The function names are determined in the same way as
+ `git diff` works out patch hunk headers (see 'Defining a
+ custom hunk-header' in linkgit:gitattributes[5]).
+
+ifndef::git-format-patch[]
+ifndef::git-log[]
+--exit-code::
+ Make the program exit with codes similar to diff(1).
+ That is, it exits with 1 if there were differences and
+ 0 means no differences.
+
+--quiet::
+ Disable all output of the program. Implies `--exit-code`.
+endif::git-log[]
+endif::git-format-patch[]
+
+--ext-diff::
+ Allow an external diff helper to be executed. If you set an
+ external diff driver with linkgit:gitattributes[5], you need
+ to use this option with linkgit:git-log[1] and friends.
+
+--no-ext-diff::
+ Disallow external diff drivers.
+
+--textconv::
+--no-textconv::
+ Allow (or disallow) external text conversion filters to be run
+ when comparing binary files. See linkgit:gitattributes[5] for
+ details. Because textconv filters are typically a one-way
+ conversion, the resulting diff is suitable for human
+ consumption, but cannot be applied. For this reason, textconv
+ filters are enabled by default only for linkgit:git-diff[1] and
+ linkgit:git-log[1], but not for linkgit:git-format-patch[1] or
+ diff plumbing commands.
+
+--ignore-submodules[=<when>]::
+ Ignore changes to submodules in the diff generation. <when> can be
+ either "none", "untracked", "dirty" or "all", which is the default.
+ Using "none" will consider the submodule modified when it either contains
+ untracked or modified files or its HEAD differs from the commit recorded
+ in the superproject and can be used to override any settings of the
+ 'ignore' option in linkgit:git-config[1] or linkgit:gitmodules[5]. When
+ "untracked" is used submodules are not considered dirty when they only
+ contain untracked content (but they are still scanned for modified
+ content). Using "dirty" ignores all changes to the work tree of submodules,
+ only changes to the commits stored in the superproject are shown (this was
+ the behavior until 1.7.0). Using "all" hides all changes to submodules.
+
+--src-prefix=<prefix>::
+ Show the given source prefix instead of "a/".
+
+--dst-prefix=<prefix>::
+ Show the given destination prefix instead of "b/".
+
+--no-prefix::
+ Do not show any source or destination prefix.
+
+--line-prefix=<prefix>::
+ Prepend an additional prefix to every line of output.
+
+--ita-invisible-in-index::
+ By default entries added by "git add -N" appear as an existing
+ empty file in "git diff" and a new file in "git diff --cached".
+ This option makes the entry appear as a new file in "git diff"
+ and non-existent in "git diff --cached". This option could be
+ reverted with `--ita-visible-in-index`. Both options are
+ experimental and could be removed in future.
+
+For more detailed explanation on these common options, see also
+linkgit:gitdiffcore[7].