diff options
Diffstat (limited to '')
| -rwxr-xr-x | t/t7527-builtin-fsmonitor.sh | 1006 |
1 files changed, 1006 insertions, 0 deletions
diff --git a/t/t7527-builtin-fsmonitor.sh b/t/t7527-builtin-fsmonitor.sh new file mode 100755 index 0000000..4abc74d --- /dev/null +++ b/t/t7527-builtin-fsmonitor.sh @@ -0,0 +1,1006 @@ +#!/bin/sh + +test_description='built-in file system watcher' + +. ./test-lib.sh + +if ! test_have_prereq FSMONITOR_DAEMON +then + skip_all="fsmonitor--daemon is not supported on this platform" + test_done +fi + +stop_daemon_delete_repo () { + r=$1 && + test_might_fail git -C $r fsmonitor--daemon stop && + rm -rf $1 +} + +start_daemon () { + r= tf= t2= tk= && + + while test "$#" -ne 0 + do + case "$1" in + -C) + r="-C ${2?}" + shift + ;; + --tf) + tf="${2?}" + shift + ;; + --t2) + t2="${2?}" + shift + ;; + --tk) + tk="${2?}" + shift + ;; + -*) + BUG "error: unknown option: '$1'" + ;; + *) + BUG "error: unbound argument: '$1'" + ;; + esac + shift + done && + + ( + if test -n "$tf" + then + GIT_TRACE_FSMONITOR="$tf" + export GIT_TRACE_FSMONITOR + fi && + + if test -n "$t2" + then + GIT_TRACE2_PERF="$t2" + export GIT_TRACE2_PERF + fi && + + if test -n "$tk" + then + GIT_TEST_FSMONITOR_TOKEN="$tk" + export GIT_TEST_FSMONITOR_TOKEN + fi && + + git $r fsmonitor--daemon start && + git $r fsmonitor--daemon status + ) +} + +# Is a Trace2 data event present with the given catetory and key? +# We do not care what the value is. +# +have_t2_data_event () { + c=$1 && + k=$2 && + + grep -e '"event":"data".*"category":"'"$c"'".*"key":"'"$k"'"' +} + +test_expect_success 'explicit daemon start and stop' ' + test_when_finished "stop_daemon_delete_repo test_explicit" && + + git init test_explicit && + start_daemon -C test_explicit && + + git -C test_explicit fsmonitor--daemon stop && + test_must_fail git -C test_explicit fsmonitor--daemon status +' + +test_expect_success 'implicit daemon start' ' + test_when_finished "stop_daemon_delete_repo test_implicit" && + + git init test_implicit && + test_must_fail git -C test_implicit fsmonitor--daemon status && + + # query will implicitly start the daemon. + # + # for test-script simplicity, we send a V1 timestamp rather than + # a V2 token. either way, the daemon response to any query contains + # a new V2 token. (the daemon may complain that we sent a V1 request, + # but this test case is only concerned with whether the daemon was + # implicitly started.) + + GIT_TRACE2_EVENT="$PWD/.git/trace" \ + test-tool -C test_implicit fsmonitor-client query --token 0 >actual && + nul_to_q <actual >actual.filtered && + grep "builtin:" actual.filtered && + + # confirm that a daemon was started in the background. + # + # since the mechanism for starting the background daemon is platform + # dependent, just confirm that the foreground command received a + # response from the daemon. + + have_t2_data_event fsm_client query/response-length <.git/trace && + + git -C test_implicit fsmonitor--daemon status && + git -C test_implicit fsmonitor--daemon stop && + test_must_fail git -C test_implicit fsmonitor--daemon status +' + +# Verify that the daemon has shutdown. Spin a few seconds to +# make the test a little more robust during CI testing. +# +# We're looking for an implicit shutdown, such as when we delete or +# rename the ".git" directory. Our delete/rename will cause a file +# system event that the daemon will see and the daemon will +# auto-shutdown as soon as it sees it. But this is racy with our `git +# fsmonitor--daemon status` commands (and we cannot use a cookie file +# here to help us). So spin a little and give the daemon a chance to +# see the event. (This is primarily for underpowered CI build/test +# machines (where it might take a moment to wake and reschedule the +# daemon process) to avoid false alarms during test runs.) +# +IMPLICIT_TIMEOUT=5 + +verify_implicit_shutdown () { + r=$1 && + + k=0 && + while test "$k" -lt $IMPLICIT_TIMEOUT + do + git -C $r fsmonitor--daemon status || return 0 + + sleep 1 + k=$(( $k + 1 )) + done && + + return 1 +} + +test_expect_success 'implicit daemon stop (delete .git)' ' + test_when_finished "stop_daemon_delete_repo test_implicit_1" && + + git init test_implicit_1 && + + start_daemon -C test_implicit_1 && + + # deleting the .git directory will implicitly stop the daemon. + rm -rf test_implicit_1/.git && + + # [1] Create an empty .git directory so that the following Git + # command will stay relative to the `-C` directory. + # + # Without this, the Git command will override the requested + # -C argument and crawl out to the containing Git source tree. + # This would make the test result dependent upon whether we + # were using fsmonitor on our development worktree. + # + mkdir test_implicit_1/.git && + + verify_implicit_shutdown test_implicit_1 +' + +test_expect_success 'implicit daemon stop (rename .git)' ' + test_when_finished "stop_daemon_delete_repo test_implicit_2" && + + git init test_implicit_2 && + + start_daemon -C test_implicit_2 && + + # renaming the .git directory will implicitly stop the daemon. + mv test_implicit_2/.git test_implicit_2/.xxx && + + # See [1] above. + # + mkdir test_implicit_2/.git && + + verify_implicit_shutdown test_implicit_2 +' + +# File systems on Windows may or may not have shortnames. +# This is a volume-specific setting on modern systems. +# "C:/" drives are required to have them enabled. Other +# hard drives default to disabled. +# +# This is a crude test to see if shortnames are enabled +# on the volume containing the test directory. It is +# crude, but it does not require elevation like `fsutil`. +# +test_lazy_prereq SHORTNAMES ' + mkdir .foo && + test -d "FOO~1" +' + +# Here we assume that the shortname of ".git" is "GIT~1". +test_expect_success MINGW,SHORTNAMES 'implicit daemon stop (rename GIT~1)' ' + test_when_finished "stop_daemon_delete_repo test_implicit_1s" && + + git init test_implicit_1s && + + start_daemon -C test_implicit_1s && + + # renaming the .git directory will implicitly stop the daemon. + # this moves {.git, GIT~1} to {.gitxyz, GITXYZ~1}. + # the rename-from FS Event will contain the shortname. + # + mv test_implicit_1s/GIT~1 test_implicit_1s/.gitxyz && + + # See [1] above. + # this moves {.gitxyz, GITXYZ~1} to {.git, GIT~1}. + mv test_implicit_1s/.gitxyz test_implicit_1s/.git && + + verify_implicit_shutdown test_implicit_1s +' + +# Here we first create a file with LONGNAME of "GIT~1" before +# we create the repo. This will cause the shortname of ".git" +# to be "GIT~2". +test_expect_success MINGW,SHORTNAMES 'implicit daemon stop (rename GIT~2)' ' + test_when_finished "stop_daemon_delete_repo test_implicit_1s2" && + + mkdir test_implicit_1s2 && + echo HELLO >test_implicit_1s2/GIT~1 && + git init test_implicit_1s2 && + + test_path_is_file test_implicit_1s2/GIT~1 && + test_path_is_dir test_implicit_1s2/GIT~2 && + + start_daemon -C test_implicit_1s2 && + + # renaming the .git directory will implicitly stop the daemon. + # the rename-from FS Event will contain the shortname. + # + mv test_implicit_1s2/GIT~2 test_implicit_1s2/.gitxyz && + + # See [1] above. + mv test_implicit_1s2/.gitxyz test_implicit_1s2/.git && + + verify_implicit_shutdown test_implicit_1s2 +' + +test_expect_success 'cannot start multiple daemons' ' + test_when_finished "stop_daemon_delete_repo test_multiple" && + + git init test_multiple && + + start_daemon -C test_multiple && + + test_must_fail git -C test_multiple fsmonitor--daemon start 2>actual && + grep "fsmonitor--daemon is already running" actual && + + git -C test_multiple fsmonitor--daemon stop && + test_must_fail git -C test_multiple fsmonitor--daemon status +' + +# These tests use the main repo in the trash directory + +test_expect_success 'setup' ' + >tracked && + >modified && + >delete && + >rename && + mkdir dir1 && + >dir1/tracked && + >dir1/modified && + >dir1/delete && + >dir1/rename && + mkdir dir2 && + >dir2/tracked && + >dir2/modified && + >dir2/delete && + >dir2/rename && + mkdir dirtorename && + >dirtorename/a && + >dirtorename/b && + + cat >.gitignore <<-\EOF && + .gitignore + expect* + actual* + flush* + trace* + EOF + + mkdir -p T1/T2/T3/T4 && + echo 1 >T1/F1 && + echo 1 >T1/T2/F1 && + echo 1 >T1/T2/T3/F1 && + echo 1 >T1/T2/T3/T4/F1 && + echo 2 >T1/F2 && + echo 2 >T1/T2/F2 && + echo 2 >T1/T2/T3/F2 && + echo 2 >T1/T2/T3/T4/F2 && + + git -c core.fsmonitor=false add . && + test_tick && + git -c core.fsmonitor=false commit -m initial && + + git config core.fsmonitor true +' + +# The test already explicitly stopped (or tried to stop) the daemon. +# This is here in case something else fails first. +# +redundant_stop_daemon () { + test_might_fail git fsmonitor--daemon stop +} + +test_expect_success 'update-index implicitly starts daemon' ' + test_when_finished redundant_stop_daemon && + + test_must_fail git fsmonitor--daemon status && + + GIT_TRACE2_EVENT="$PWD/.git/trace_implicit_1" \ + git update-index --fsmonitor && + + git fsmonitor--daemon status && + test_might_fail git fsmonitor--daemon stop && + + # Confirm that the trace2 log contains a record of the + # daemon starting. + test_subcommand git fsmonitor--daemon start <.git/trace_implicit_1 +' + +test_expect_success 'status implicitly starts daemon' ' + test_when_finished redundant_stop_daemon && + + test_must_fail git fsmonitor--daemon status && + + GIT_TRACE2_EVENT="$PWD/.git/trace_implicit_2" \ + git status >actual && + + git fsmonitor--daemon status && + test_might_fail git fsmonitor--daemon stop && + + # Confirm that the trace2 log contains a record of the + # daemon starting. + test_subcommand git fsmonitor--daemon start <.git/trace_implicit_2 +' + +edit_files () { + echo 1 >modified && + echo 2 >dir1/modified && + echo 3 >dir2/modified && + >dir1/untracked +} + +delete_files () { + rm -f delete && + rm -f dir1/delete && + rm -f dir2/delete +} + +create_files () { + echo 1 >new && + echo 2 >dir1/new && + echo 3 >dir2/new +} + +rename_files () { + mv rename renamed && + mv dir1/rename dir1/renamed && + mv dir2/rename dir2/renamed +} + +file_to_directory () { + rm -f delete && + mkdir delete && + echo 1 >delete/new +} + +directory_to_file () { + rm -rf dir1 && + echo 1 >dir1 +} + +move_directory_contents_deeper() { + mkdir T1/_new_ && + mv T1/[A-Z]* T1/_new_ +} + +move_directory_up() { + mv T1/T2/T3 T1 +} + +move_directory() { + mv T1/T2/T3 T1/T2/NewT3 +} + +# The next few test cases confirm that our fsmonitor daemon sees each type +# of OS filesystem notification that we care about. At this layer we just +# ensure we are getting the OS notifications and do not try to confirm what +# is reported by `git status`. +# +# We run a simple query after modifying the filesystem just to introduce +# a bit of a delay so that the trace logging from the daemon has time to +# get flushed to disk. +# +# We `reset` and `clean` at the bottom of each test (and before stopping the +# daemon) because these commands might implicitly restart the daemon. + +clean_up_repo_and_stop_daemon () { + git reset --hard HEAD && + git clean -fd && + test_might_fail git fsmonitor--daemon stop && + rm -f .git/trace +} + +test_expect_success 'edit some files' ' + test_when_finished clean_up_repo_and_stop_daemon && + + start_daemon --tf "$PWD/.git/trace" && + + edit_files && + + test-tool fsmonitor-client query --token 0 && + + grep "^event: dir1/modified$" .git/trace && + grep "^event: dir2/modified$" .git/trace && + grep "^event: modified$" .git/trace && + grep "^event: dir1/untracked$" .git/trace +' + +test_expect_success 'create some files' ' + test_when_finished clean_up_repo_and_stop_daemon && + + start_daemon --tf "$PWD/.git/trace" && + + create_files && + + test-tool fsmonitor-client query --token 0 && + + grep "^event: dir1/new$" .git/trace && + grep "^event: dir2/new$" .git/trace && + grep "^event: new$" .git/trace +' + +test_expect_success 'delete some files' ' + test_when_finished clean_up_repo_and_stop_daemon && + + start_daemon --tf "$PWD/.git/trace" && + + delete_files && + + test-tool fsmonitor-client query --token 0 && + + grep "^event: dir1/delete$" .git/trace && + grep "^event: dir2/delete$" .git/trace && + grep "^event: delete$" .git/trace +' + +test_expect_success 'rename some files' ' + test_when_finished clean_up_repo_and_stop_daemon && + + start_daemon --tf "$PWD/.git/trace" && + + rename_files && + + test-tool fsmonitor-client query --token 0 && + + grep "^event: dir1/rename$" .git/trace && + grep "^event: dir2/rename$" .git/trace && + grep "^event: rename$" .git/trace && + grep "^event: dir1/renamed$" .git/trace && + grep "^event: dir2/renamed$" .git/trace && + grep "^event: renamed$" .git/trace +' + +test_expect_success 'rename directory' ' + test_when_finished clean_up_repo_and_stop_daemon && + + start_daemon --tf "$PWD/.git/trace" && + + mv dirtorename dirrenamed && + + test-tool fsmonitor-client query --token 0 && + + grep "^event: dirtorename/*$" .git/trace && + grep "^event: dirrenamed/*$" .git/trace +' + +test_expect_success 'file changes to directory' ' + test_when_finished clean_up_repo_and_stop_daemon && + + start_daemon --tf "$PWD/.git/trace" && + + file_to_directory && + + test-tool fsmonitor-client query --token 0 && + + grep "^event: delete$" .git/trace && + grep "^event: delete/new$" .git/trace +' + +test_expect_success 'directory changes to a file' ' + test_when_finished clean_up_repo_and_stop_daemon && + + start_daemon --tf "$PWD/.git/trace" && + + directory_to_file && + + test-tool fsmonitor-client query --token 0 && + + grep "^event: dir1$" .git/trace +' + +# The next few test cases exercise the token-resync code. When filesystem +# drops events (because of filesystem velocity or because the daemon isn't +# polling fast enough), we need to discard the cached data (relative to the +# current token) and start collecting events under a new token. +# +# the 'test-tool fsmonitor-client flush' command can be used to send a +# "flush" message to a running daemon and ask it to do a flush/resync. + +test_expect_success 'flush cached data' ' + test_when_finished "stop_daemon_delete_repo test_flush" && + + git init test_flush && + + start_daemon -C test_flush --tf "$PWD/.git/trace_daemon" --tk true && + + # The daemon should have an initial token with no events in _0 and + # then a few (probably platform-specific number of) events in _1. + # These should both have the same <token_id>. + + test-tool -C test_flush fsmonitor-client query --token "builtin:test_00000001:0" >actual_0 && + nul_to_q <actual_0 >actual_q0 && + + >test_flush/file_1 && + >test_flush/file_2 && + + test-tool -C test_flush fsmonitor-client query --token "builtin:test_00000001:0" >actual_1 && + nul_to_q <actual_1 >actual_q1 && + + grep "file_1" actual_q1 && + + # Force a flush. This will change the <token_id>, reset the <seq_nr>, and + # flush the file data. Then create some events and ensure that the file + # again appears in the cache. It should have the new <token_id>. + + test-tool -C test_flush fsmonitor-client flush >flush_0 && + nul_to_q <flush_0 >flush_q0 && + grep "^builtin:test_00000002:0Q/Q$" flush_q0 && + + test-tool -C test_flush fsmonitor-client query --token "builtin:test_00000002:0" >actual_2 && + nul_to_q <actual_2 >actual_q2 && + + grep "^builtin:test_00000002:0Q$" actual_q2 && + + >test_flush/file_3 && + + test-tool -C test_flush fsmonitor-client query --token "builtin:test_00000002:0" >actual_3 && + nul_to_q <actual_3 >actual_q3 && + + grep "file_3" actual_q3 +' + +# The next few test cases create repos where the .git directory is NOT +# inside the one of the working directory. That is, where .git is a file +# that points to a directory elsewhere. This happens for submodules and +# non-primary worktrees. + +test_expect_success 'setup worktree base' ' + git init wt-base && + echo 1 >wt-base/file1 && + git -C wt-base add file1 && + git -C wt-base commit -m "c1" +' + +test_expect_success 'worktree with .git file' ' + git -C wt-base worktree add ../wt-secondary && + + start_daemon -C wt-secondary \ + --tf "$PWD/trace_wt_secondary" \ + --t2 "$PWD/trace2_wt_secondary" && + + git -C wt-secondary fsmonitor--daemon stop && + test_must_fail git -C wt-secondary fsmonitor--daemon status +' + +# NEEDSWORK: Repeat one of the "edit" tests on wt-secondary and +# confirm that we get the same events and behavior -- that is, that +# fsmonitor--daemon correctly watches BOTH the working directory and +# the external GITDIR directory and behaves the same as when ".git" +# is a directory inside the working directory. + +test_expect_success 'cleanup worktrees' ' + stop_daemon_delete_repo wt-secondary && + stop_daemon_delete_repo wt-base +' + +# The next few tests perform arbitrary/contrived file operations and +# confirm that status is correct. That is, that the data (or lack of +# data) from fsmonitor doesn't cause incorrect results. And doesn't +# cause incorrect results when the untracked-cache is enabled. + +test_lazy_prereq UNTRACKED_CACHE ' + git update-index --test-untracked-cache +' + +test_expect_success 'Matrix: setup for untracked-cache,fsmonitor matrix' ' + test_unconfig core.fsmonitor && + git update-index --no-fsmonitor && + test_might_fail git fsmonitor--daemon stop +' + +matrix_clean_up_repo () { + git reset --hard HEAD && + git clean -fd +} + +matrix_try () { + uc=$1 && + fsm=$2 && + fn=$3 && + + if test $uc = true && test $fsm = false + then + # The untracked-cache is buggy when FSMonitor is + # DISABLED, so skip the tests for this matrix + # combination. + # + # We've observed random, occasional test failures on + # Windows and MacOS when the UC is turned on and FSM + # is turned off. These are rare, but they do happen + # indicating that it is probably a race condition within + # the untracked cache itself. + # + # It usually happens when a test does F/D trickery and + # then the NEXT test fails because of extra status + # output from stale UC data from the previous test. + # + # Since FSMonitor is not involved in the error, skip + # the tests for this matrix combination. + # + return 0 + fi && + + test_expect_success "Matrix[uc:$uc][fsm:$fsm] $fn" ' + matrix_clean_up_repo && + $fn && + if test $uc = false && test $fsm = false + then + git status --porcelain=v1 >.git/expect.$fn + else + git status --porcelain=v1 >.git/actual.$fn && + test_cmp .git/expect.$fn .git/actual.$fn + fi + ' +} + +uc_values="false" +test_have_prereq UNTRACKED_CACHE && uc_values="false true" +for uc_val in $uc_values +do + if test $uc_val = false + then + test_expect_success "Matrix[uc:$uc_val] disable untracked cache" ' + git config core.untrackedcache false && + git update-index --no-untracked-cache + ' + else + test_expect_success "Matrix[uc:$uc_val] enable untracked cache" ' + git config core.untrackedcache true && + git update-index --untracked-cache + ' + fi + + fsm_values="false true" + for fsm_val in $fsm_values + do + if test $fsm_val = false + then + test_expect_success "Matrix[uc:$uc_val][fsm:$fsm_val] disable fsmonitor" ' + test_unconfig core.fsmonitor && + git update-index --no-fsmonitor && + test_might_fail git fsmonitor--daemon stop + ' + else + test_expect_success "Matrix[uc:$uc_val][fsm:$fsm_val] enable fsmonitor" ' + git config core.fsmonitor true && + git fsmonitor--daemon start && + git update-index --fsmonitor + ' + fi + + matrix_try $uc_val $fsm_val edit_files + matrix_try $uc_val $fsm_val delete_files + matrix_try $uc_val $fsm_val create_files + matrix_try $uc_val $fsm_val rename_files + matrix_try $uc_val $fsm_val file_to_directory + matrix_try $uc_val $fsm_val directory_to_file + + matrix_try $uc_val $fsm_val move_directory_contents_deeper + matrix_try $uc_val $fsm_val move_directory_up + matrix_try $uc_val $fsm_val move_directory + + if test $fsm_val = true + then + test_expect_success "Matrix[uc:$uc_val][fsm:$fsm_val] disable fsmonitor at end" ' + test_unconfig core.fsmonitor && + git update-index --no-fsmonitor && + test_might_fail git fsmonitor--daemon stop + ' + fi + done +done + +# Test Unicode UTF-8 characters in the pathname of the working +# directory root. Use of "*A()" routines rather than "*W()" routines +# on Windows can sometimes lead to odd failures. +# +u1=$(printf "u_c3_a6__\xC3\xA6") +u2=$(printf "u_e2_99_ab__\xE2\x99\xAB") +u_values="$u1 $u2" +for u in $u_values +do + test_expect_success "unicode in repo root path: $u" ' + test_when_finished "stop_daemon_delete_repo $u" && + + git init "$u" && + echo 1 >"$u"/file1 && + git -C "$u" add file1 && + git -C "$u" config core.fsmonitor true && + + start_daemon -C "$u" && + git -C "$u" status >actual && + grep "new file: file1" actual + ' +done + +# Test fsmonitor interaction with submodules. +# +# If we start the daemon in the super, it will see FS events for +# everything in the working directory cone and this includes any +# files/directories contained *within* the submodules. +# +# A `git status` at top level will get events for items within the +# submodule and ignore them, since they aren't named in the index +# of the super repo. This makes the fsmonitor response a little +# noisy, but it doesn't alter the correctness of the state of the +# super-proper. +# +# When we have submodules, `git status` normally does a recursive +# status on each of the submodules and adds a summary row for any +# dirty submodules. (See the "S..." bits in porcelain V2 output.) +# +# It is therefore important that the top level status not be tricked +# by the FSMonitor response to skip those recursive calls. That is, +# even if FSMonitor says that the mtime of the submodule directory +# hasn't changed and it could be implicitly marked valid, we must +# not take that shortcut. We need to force the recusion into the +# submodule so that we get a summary of the status *within* the +# submodule. + +create_super () { + super="$1" && + + git init "$super" && + echo x >"$super/file_1" && + echo y >"$super/file_2" && + echo z >"$super/file_3" && + mkdir "$super/dir_1" && + echo a >"$super/dir_1/file_11" && + echo b >"$super/dir_1/file_12" && + mkdir "$super/dir_1/dir_2" && + echo a >"$super/dir_1/dir_2/file_21" && + echo b >"$super/dir_1/dir_2/file_22" && + git -C "$super" add . && + git -C "$super" commit -m "initial $super commit" +} + +create_sub () { + sub="$1" && + + git init "$sub" && + echo x >"$sub/file_x" && + echo y >"$sub/file_y" && + echo z >"$sub/file_z" && + mkdir "$sub/dir_x" && + echo a >"$sub/dir_x/file_a" && + echo b >"$sub/dir_x/file_b" && + mkdir "$sub/dir_x/dir_y" && + echo a >"$sub/dir_x/dir_y/file_a" && + echo b >"$sub/dir_x/dir_y/file_b" && + git -C "$sub" add . && + git -C "$sub" commit -m "initial $sub commit" +} + +my_match_and_clean () { + git -C super --no-optional-locks status --porcelain=v2 >actual.with && + git -C super --no-optional-locks -c core.fsmonitor=false \ + status --porcelain=v2 >actual.without && + test_cmp actual.with actual.without && + + git -C super/dir_1/dir_2/sub reset --hard && + git -C super/dir_1/dir_2/sub clean -d -f +} + +test_expect_success 'submodule setup' ' + git config --global protocol.file.allow always +' + +test_expect_success 'submodule always visited' ' + test_when_finished "git -C super fsmonitor--daemon stop; \ + rm -rf super; \ + rm -rf sub" && + + create_super super && + create_sub sub && + + git -C super submodule add ../sub ./dir_1/dir_2/sub && + git -C super commit -m "add sub" && + + start_daemon -C super && + git -C super config core.fsmonitor true && + git -C super update-index --fsmonitor && + git -C super status && + + # Now run pairs of commands w/ and w/o FSMonitor while we make + # some dirt in the submodule and confirm matching output. + + # Completely clean status. + my_match_and_clean && + + # .M S..U + echo z >super/dir_1/dir_2/sub/dir_x/dir_y/foobar_u && + my_match_and_clean && + + # .M S.M. + echo z >super/dir_1/dir_2/sub/dir_x/dir_y/foobar_m && + git -C super/dir_1/dir_2/sub add . && + my_match_and_clean && + + # .M S.M. + echo z >>super/dir_1/dir_2/sub/dir_x/dir_y/file_a && + git -C super/dir_1/dir_2/sub add . && + my_match_and_clean && + + # .M SC.. + echo z >>super/dir_1/dir_2/sub/dir_x/dir_y/file_a && + git -C super/dir_1/dir_2/sub add . && + git -C super/dir_1/dir_2/sub commit -m "SC.." && + my_match_and_clean +' + +# If a submodule has a `sub/.git/` directory (rather than a file +# pointing to the super's `.git/modules/sub`) and `core.fsmonitor` +# turned on in the submodule and the daemon is not yet started in +# the submodule, and someone does a `git submodule absorbgitdirs` +# in the super, Git will recursively invoke `git submodule--helper` +# to do the work and this may try to read the index. This will +# try to start the daemon in the submodule *and* pass (either +# directly or via inheritance) the `--super-prefix` arg to the +# `git fsmonitor--daemon start` command inside the submodule. +# This causes a warning because fsmonitor--daemon does take that +# global arg (see the table in git.c) +# +# This causes a warning when trying to start the daemon that is +# somewhat confusing. It does not seem to hurt anything because +# the fsmonitor code maps the query failure into a trivial response +# and does the work anyway. +# +# It would be nice to silence the warning, however. + +have_t2_error_event () { + log=$1 + msg="fsmonitor--daemon doesnQt support --super-prefix" && + + tr '\047' Q <$1 | grep -e "$msg" +} + +test_expect_success "stray submodule super-prefix warning" ' + test_when_finished "rm -rf super; \ + rm -rf sub; \ + rm super-sub.trace" && + + create_super super && + create_sub sub && + + # Copy rather than submodule add so that we get a .git dir. + cp -R ./sub ./super/dir_1/dir_2/sub && + + git -C super/dir_1/dir_2/sub config core.fsmonitor true && + + git -C super submodule add ../sub ./dir_1/dir_2/sub && + git -C super commit -m "add sub" && + + test_path_is_dir super/dir_1/dir_2/sub/.git && + + GIT_TRACE2_EVENT="$PWD/super-sub.trace" \ + git -C super submodule absorbgitdirs && + + ! have_t2_error_event super-sub.trace +' + +# On a case-insensitive file system, confirm that the daemon +# notices when the .git directory is moved/renamed/deleted +# regardless of how it is spelled in the the FS event. +# That is, does the FS event receive the spelling of the +# operation or does it receive the spelling preserved with +# the file/directory. +# +test_expect_success CASE_INSENSITIVE_FS 'case insensitive+preserving' ' +# test_when_finished "stop_daemon_delete_repo test_insensitive" && + + git init test_insensitive && + + start_daemon -C test_insensitive --tf "$PWD/insensitive.trace" && + + mkdir -p test_insensitive/abc/def && + echo xyz >test_insensitive/ABC/DEF/xyz && + + test_path_is_dir test_insensitive/.git && + test_path_is_dir test_insensitive/.GIT && + + # Rename .git using an alternate spelling to verify that that + # daemon detects it and automatically shuts down. + mv test_insensitive/.GIT test_insensitive/.FOO && + + # See [1] above. + mv test_insensitive/.FOO test_insensitive/.git && + + verify_implicit_shutdown test_insensitive && + + # Verify that events were reported using on-disk spellings of the + # directories and files that we touched. We may or may not get a + # trailing slash on modified directories. + # + grep -E "^event: abc/?$" ./insensitive.trace && + grep -E "^event: abc/def/?$" ./insensitive.trace && + grep -E "^event: abc/def/xyz$" ./insensitive.trace +' + +# The variable "unicode_debug" is defined in the following library +# script to dump information about how the (OS, FS) handles Unicode +# composition. Uncomment the following line if you want to enable it. +# +# unicode_debug=true + +. "$TEST_DIRECTORY/lib-unicode-nfc-nfd.sh" + +# See if the OS or filesystem does NFC/NFD aliasing/munging. +# +# The daemon should err on the side of caution and send BOTH the +# NFC and NFD forms. It does not know the original spelling of +# the pathname (how the user thinks it should be spelled), so +# emit both and let the client decide (when necessary). This is +# similar to "core.precomposeUnicode". +# +test_expect_success !UNICODE_COMPOSITION_SENSITIVE 'Unicode nfc/nfd' ' + test_when_finished "stop_daemon_delete_repo test_unicode" && + + git init test_unicode && + + start_daemon -C test_unicode --tf "$PWD/unicode.trace" && + + # Create a directory using an NFC spelling. + # + mkdir test_unicode/nfc && + mkdir test_unicode/nfc/c_${utf8_nfc} && + + # Create a directory using an NFD spelling. + # + mkdir test_unicode/nfd && + mkdir test_unicode/nfd/d_${utf8_nfd} && + + git -C test_unicode fsmonitor--daemon stop && + + if test_have_prereq UNICODE_NFC_PRESERVED + then + # We should have seen NFC event from OS. + # We should not have synthesized an NFD event. + grep -E "^event: nfc/c_${utf8_nfc}/?$" ./unicode.trace && + grep -E -v "^event: nfc/c_${utf8_nfd}/?$" ./unicode.trace + else + # We should have seen NFD event from OS. + # We should have synthesized an NFC event. + grep -E "^event: nfc/c_${utf8_nfd}/?$" ./unicode.trace && + grep -E "^event: nfc/c_${utf8_nfc}/?$" ./unicode.trace + fi && + + # We assume UNICODE_NFD_PRESERVED. + # We should have seen explicit NFD from OS. + # We should have synthesized an NFC event. + grep -E "^event: nfd/d_${utf8_nfd}/?$" ./unicode.trace && + grep -E "^event: nfd/d_${utf8_nfc}/?$" ./unicode.trace +' + +test_done |