From c8bae7493d2f2910b57f13ded012e86bdcfb0532 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 16:47:53 +0200 Subject: Adding upstream version 1:2.39.2. Signed-off-by: Daniel Baumann --- Documentation/git-svn.txt | 1174 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 1174 insertions(+) create mode 100644 Documentation/git-svn.txt (limited to 'Documentation/git-svn.txt') diff --git a/Documentation/git-svn.txt b/Documentation/git-svn.txt new file mode 100644 index 0000000..4e92308 --- /dev/null +++ b/Documentation/git-svn.txt @@ -0,0 +1,1174 @@ +git-svn(1) +========== + +NAME +---- +git-svn - Bidirectional operation between a Subversion repository and Git + +SYNOPSIS +-------- +[verse] +'git svn' [] [] + +DESCRIPTION +----------- +'git svn' is a simple conduit for changesets between Subversion and Git. +It provides a bidirectional flow of changes between a Subversion and a Git +repository. + +'git svn' can track a standard Subversion repository, +following the common "trunk/branches/tags" layout, with the --stdlayout option. +It can also follow branches and tags in any layout with the -T/-t/-b options +(see options to 'init' below, and also the 'clone' command). + +Once tracking a Subversion repository (with any of the above methods), the Git +repository can be updated from Subversion by the 'fetch' command and +Subversion updated from Git by the 'dcommit' command. + +COMMANDS +-------- + +'init':: + Initializes an empty Git repository with additional + metadata directories for 'git svn'. The Subversion URL + may be specified as a command-line argument, or as full + URL arguments to -T/-t/-b. Optionally, the target + directory to operate on can be specified as a second + argument. Normally this command initializes the current + directory. + +-T;; +--trunk=;; +-t;; +--tags=;; +-b;; +--branches=;; +-s;; +--stdlayout;; + These are optional command-line options for init. Each of + these flags can point to a relative repository path + (--tags=project/tags) or a full url + (--tags=https://foo.org/project/tags). + You can specify more than one --tags and/or --branches options, in case + your Subversion repository places tags or branches under multiple paths. + The option --stdlayout is + a shorthand way of setting trunk,tags,branches as the relative paths, + which is the Subversion default. If any of the other options are given + as well, they take precedence. +--no-metadata;; + Set the 'noMetadata' option in the [svn-remote] config. + This option is not recommended, please read the 'svn.noMetadata' + section of this manpage before using this option. +--use-svm-props;; + Set the 'useSvmProps' option in the [svn-remote] config. +--use-svnsync-props;; + Set the 'useSvnsyncProps' option in the [svn-remote] config. +--rewrite-root=;; + Set the 'rewriteRoot' option in the [svn-remote] config. +--rewrite-uuid=;; + Set the 'rewriteUUID' option in the [svn-remote] config. +--username=;; + For transports that SVN handles authentication for (http, + https, and plain svn), specify the username. For other + transports (e.g. `svn+ssh://`), you must include the username in + the URL, e.g. `svn+ssh://foo@svn.bar.com/project` +--prefix=;; + This allows one to specify a prefix which is prepended + to the names of remotes if trunk/branches/tags are + specified. The prefix does not automatically include a + trailing slash, so be sure you include one in the + argument if that is what you want. If --branches/-b is + specified, the prefix must include a trailing slash. + Setting a prefix (with a trailing slash) is strongly + encouraged in any case, as your SVN-tracking refs will + then be located at "refs/remotes/$prefix/*", which is + compatible with Git's own remote-tracking ref layout + (refs/remotes/$remote/*). Setting a prefix is also useful + if you wish to track multiple projects that share a common + repository. + By default, the prefix is set to 'origin/'. ++ +NOTE: Before Git v2.0, the default prefix was "" (no prefix). This +meant that SVN-tracking refs were put at "refs/remotes/*", which is +incompatible with how Git's own remote-tracking refs are organized. +If you still want the old default, you can get it by passing +`--prefix ""` on the command line (`--prefix=""` may not work if +your Perl's Getopt::Long is < v2.37). + +--ignore-refs=;; + When passed to 'init' or 'clone' this regular expression will + be preserved as a config key. See 'fetch' for a description + of `--ignore-refs`. +--ignore-paths=;; + When passed to 'init' or 'clone' this regular expression will + be preserved as a config key. See 'fetch' for a description + of `--ignore-paths`. +--include-paths=;; + When passed to 'init' or 'clone' this regular expression will + be preserved as a config key. See 'fetch' for a description + of `--include-paths`. +--no-minimize-url;; + When tracking multiple directories (using --stdlayout, + --branches, or --tags options), git svn will attempt to connect + to the root (or highest allowed level) of the Subversion + repository. This default allows better tracking of history if + entire projects are moved within a repository, but may cause + issues on repositories where read access restrictions are in + place. Passing `--no-minimize-url` will allow git svn to + accept URLs as-is without attempting to connect to a higher + level directory. This option is off by default when only + one URL/branch is tracked (it would do little good). + +'fetch':: + Fetch unfetched revisions from the Subversion remote we are + tracking. The name of the [svn-remote "..."] section in the + $GIT_DIR/config file may be specified as an optional + command-line argument. ++ +This automatically updates the rev_map if needed (see +'$GIT_DIR/svn/\**/.rev_map.*' in the FILES section below for details). + +--localtime;; + Store Git commit times in the local time zone instead of UTC. This + makes 'git log' (even without --date=local) show the same times + that `svn log` would in the local time zone. ++ +This doesn't interfere with interoperating with the Subversion +repository you cloned from, but if you wish for your local Git +repository to be able to interoperate with someone else's local Git +repository, either don't use this option or you should both use it in +the same local time zone. + +--parent;; + Fetch only from the SVN parent of the current HEAD. + +--ignore-refs=;; + Ignore refs for branches or tags matching the Perl regular + expression. A "negative look-ahead assertion" like + `^refs/remotes/origin/(?!tags/wanted-tag|wanted-branch).*$` + can be used to allow only certain refs. ++ +[verse] +config key: svn-remote..ignore-refs ++ +If the ignore-refs configuration key is set, and the command-line +option is also given, both regular expressions will be used. + +--ignore-paths=;; + This allows one to specify a Perl regular expression that will + cause skipping of all matching paths from checkout from SVN. + The `--ignore-paths` option should match for every 'fetch' + (including automatic fetches due to 'clone', 'dcommit', + 'rebase', etc) on a given repository. ++ +[verse] +config key: svn-remote..ignore-paths ++ +If the ignore-paths configuration key is set, and the command-line +option is also given, both regular expressions will be used. ++ +Examples: ++ +-- +Skip "doc*" directory for every fetch;; ++ +------------------------------------------------------------------------ +--ignore-paths="^doc" +------------------------------------------------------------------------ + +Skip "branches" and "tags" of first level directories;; ++ +------------------------------------------------------------------------ +--ignore-paths="^[^/]+/(?:branches|tags)" +------------------------------------------------------------------------ +-- + +--include-paths=;; + This allows one to specify a Perl regular expression that will + cause the inclusion of only matching paths from checkout from SVN. + The `--include-paths` option should match for every 'fetch' + (including automatic fetches due to 'clone', 'dcommit', + 'rebase', etc) on a given repository. `--ignore-paths` takes + precedence over `--include-paths`. ++ +[verse] +config key: svn-remote..include-paths + +--log-window-size=;; + Fetch log entries per request when scanning Subversion history. + The default is 100. For very large Subversion repositories, larger + values may be needed for 'clone'/'fetch' to complete in reasonable + time. But overly large values may lead to higher memory usage and + request timeouts. + +'clone':: + Runs 'init' and 'fetch'. It will automatically create a + directory based on the basename of the URL passed to it; + or if a second argument is passed; it will create a directory + and work within that. It accepts all arguments that the + 'init' and 'fetch' commands accept; with the exception of + `--fetch-all` and `--parent`. After a repository is cloned, + the 'fetch' command will be able to update revisions without + affecting the working tree; and the 'rebase' command will be + able to update the working tree with the latest changes. + +--preserve-empty-dirs;; + Create a placeholder file in the local Git repository for each + empty directory fetched from Subversion. This includes directories + that become empty by removing all entries in the Subversion + repository (but not the directory itself). The placeholder files + are also tracked and removed when no longer necessary. + +--placeholder-filename=;; + Set the name of placeholder files created by --preserve-empty-dirs. + Default: ".gitignore" + +'rebase':: + This fetches revisions from the SVN parent of the current HEAD + and rebases the current (uncommitted to SVN) work against it. ++ +This works similarly to `svn update` or 'git pull' except that +it preserves linear history with 'git rebase' instead of +'git merge' for ease of dcommitting with 'git svn'. ++ +This accepts all options that 'git svn fetch' and 'git rebase' +accept. However, `--fetch-all` only fetches from the current +[svn-remote], and not all [svn-remote] definitions. ++ +Like 'git rebase'; this requires that the working tree be clean +and have no uncommitted changes. ++ +This automatically updates the rev_map if needed (see +'$GIT_DIR/svn/\**/.rev_map.*' in the FILES section below for details). + +-l;; +--local;; + Do not fetch remotely; only run 'git rebase' against the + last fetched commit from the upstream SVN. + +'dcommit':: + Commit each diff from the current branch directly to the SVN + repository, and then rebase or reset (depending on whether or + not there is a diff between SVN and head). This will create + a revision in SVN for each commit in Git. ++ +When an optional Git branch name (or a Git commit object name) +is specified as an argument, the subcommand works on the specified +branch, not on the current branch. ++ +Use of 'dcommit' is preferred to 'set-tree' (below). ++ +--no-rebase;; + After committing, do not rebase or reset. +--commit-url ;; + Commit to this SVN URL (the full path). This is intended to + allow existing 'git svn' repositories created with one transport + method (e.g. `svn://` or `http://` for anonymous read) to be + reused if a user is later given access to an alternate transport + method (e.g. `svn+ssh://` or `https://`) for commit. ++ +[verse] +config key: svn-remote..commiturl +config key: svn.commiturl (overwrites all svn-remote..commiturl options) ++ +Note that the SVN URL of the commiturl config key includes the SVN branch. +If you rather want to set the commit URL for an entire SVN repository use +svn-remote..pushurl instead. ++ +Using this option for any other purpose (don't ask) is very strongly +discouraged. + +--mergeinfo=;; + Add the given merge information during the dcommit + (e.g. `--mergeinfo="/branches/foo:1-10"`). All svn server versions can + store this information (as a property), and svn clients starting from + version 1.5 can make use of it. To specify merge information from multiple + branches, use a single space character between the branches + (`--mergeinfo="/branches/foo:1-10 /branches/bar:3,5-6,8"`) ++ +[verse] +config key: svn.pushmergeinfo ++ +This option will cause git-svn to attempt to automatically populate the +svn:mergeinfo property in the SVN repository when possible. Currently, this can +only be done when dcommitting non-fast-forward merges where all parents but the +first have already been pushed into SVN. + +--interactive;; + Ask the user to confirm that a patch set should actually be sent to SVN. + For each patch, one may answer "yes" (accept this patch), "no" (discard this + patch), "all" (accept all patches), or "quit". ++ +'git svn dcommit' returns immediately if answer is "no" or "quit", without +committing anything to SVN. + +'branch':: + Create a branch in the SVN repository. + +-m;; +--message;; + Allows to specify the commit message. + +-t;; +--tag;; + Create a tag by using the tags_subdir instead of the branches_subdir + specified during git svn init. + +-d;; +--destination=;; + + If more than one --branches (or --tags) option was given to the 'init' + or 'clone' command, you must provide the location of the branch (or + tag) you wish to create in the SVN repository. specifies which + path to use to create the branch or tag and should match the pattern + on the left-hand side of one of the configured branches or tags + refspecs. You can see these refspecs with the commands ++ + git config --get-all svn-remote..branches + git config --get-all svn-remote..tags ++ +where is the name of the SVN repository as specified by the -R option to +'init' (or "svn" by default). + +--username;; + Specify the SVN username to perform the commit as. This option overrides + the 'username' configuration property. + +--commit-url;; + Use the specified URL to connect to the destination Subversion + repository. This is useful in cases where the source SVN + repository is read-only. This option overrides configuration + property 'commiturl'. ++ + git config --get-all svn-remote..commiturl ++ + +--parents;; + Create parent folders. This parameter is equivalent to the parameter + --parents on svn cp commands and is useful for non-standard repository + layouts. + +'tag':: + Create a tag in the SVN repository. This is a shorthand for + 'branch -t'. + +'log':: + This should make it easy to look up svn log messages when svn + users refer to -r/--revision numbers. ++ +The following features from `svn log' are supported: ++ +-- +-r [:];; +--revision=[:];; + is supported, non-numeric args are not: + HEAD, NEXT, BASE, PREV, etc ... +-v;; +--verbose;; + it's not completely compatible with the --verbose + output in svn log, but reasonably close. +--limit=;; + is NOT the same as --max-count, doesn't count + merged/excluded commits +--incremental;; + supported +-- ++ +New features: ++ +-- +--show-commit;; + shows the Git commit sha1, as well +--oneline;; + our version of --pretty=oneline +-- ++ +NOTE: SVN itself only stores times in UTC and nothing else. The regular svn +client converts the UTC time to the local time (or based on the TZ= +environment). This command has the same behaviour. ++ +Any other arguments are passed directly to 'git log' + +'blame':: + Show what revision and author last modified each line of a file. The + output of this mode is format-compatible with the output of + `svn blame' by default. Like the SVN blame command, + local uncommitted changes in the working tree are ignored; + the version of the file in the HEAD revision is annotated. Unknown + arguments are passed directly to 'git blame'. ++ +--git-format;; + Produce output in the same format as 'git blame', but with + SVN revision numbers instead of Git commit hashes. In this mode, + changes that haven't been committed to SVN (including local + working-copy edits) are shown as revision 0. + +'find-rev':: + When given an SVN revision number of the form 'rN', returns the + corresponding Git commit hash (this can optionally be followed by a + tree-ish to specify which branch should be searched). When given a + tree-ish, returns the corresponding SVN revision number. ++ +-B;; +--before;; + Don't require an exact match if given an SVN revision, instead find + the commit corresponding to the state of the SVN repository (on the + current branch) at the specified revision. ++ +-A;; +--after;; + Don't require an exact match if given an SVN revision; if there is + not an exact match return the closest match searching forward in the + history. + +'set-tree':: + You should consider using 'dcommit' instead of this command. + Commit specified commit or tree objects to SVN. This relies on + your imported fetch data being up to date. This makes + absolutely no attempts to do patching when committing to SVN, it + simply overwrites files with those specified in the tree or + commit. All merging is assumed to have taken place + independently of 'git svn' functions. + +'create-ignore':: + Recursively finds the svn:ignore property on directories and + creates matching .gitignore files. The resulting files are staged to + be committed, but are not committed. Use -r/--revision to refer to a + specific revision. + +'show-ignore':: + Recursively finds and lists the svn:ignore property on + directories. The output is suitable for appending to + the $GIT_DIR/info/exclude file. + +'mkdirs':: + Attempts to recreate empty directories that core Git cannot track + based on information in $GIT_DIR/svn//unhandled.log files. + Empty directories are automatically recreated when using + "git svn clone" and "git svn rebase", so "mkdirs" is intended + for use after commands like "git checkout" or "git reset". + (See the svn-remote..automkdirs config file option for + more information.) + +'commit-diff':: + Commits the diff of two tree-ish arguments from the + command-line. This command does not rely on being inside a `git svn + init`-ed repository. This command takes three arguments, (a) the + original tree to diff against, (b) the new tree result, (c) the + URL of the target Subversion repository. The final argument + (URL) may be omitted if you are working from a 'git svn'-aware + repository (that has been `init`-ed with 'git svn'). + The -r option is required for this. ++ +The commit message is supplied either directly with the `-m` or `-F` +option, or indirectly from the tag or commit when the second tree-ish +denotes such an object, or it is requested by invoking an editor (see +`--edit` option below). + +-m ;; +--message=;; + Use the given `msg` as the commit message. This option + disables the `--edit` option. + +-F ;; +--file=;; + Take the commit message from the given file. This option + disables the `--edit` option. + +'info':: + Shows information about a file or directory similar to what + `svn info' provides. Does not currently support a -r/--revision + argument. Use the --url option to output only the value of the + 'URL:' field. + +'proplist':: + Lists the properties stored in the Subversion repository about a + given file or directory. Use -r/--revision to refer to a specific + Subversion revision. + +'propget':: + Gets the Subversion property given as the first argument, for a + file. A specific revision can be specified with -r/--revision. + +'propset':: + Sets the Subversion property given as the first argument, to the + value given as the second argument for the file given as the + third argument. ++ +Example: ++ +------------------------------------------------------------------------ +git svn propset svn:keywords "FreeBSD=%H" devel/py-tipper/Makefile +------------------------------------------------------------------------ ++ +This will set the property 'svn:keywords' to 'FreeBSD=%H' for the file +'devel/py-tipper/Makefile'. + +'show-externals':: + Shows the Subversion externals. Use -r/--revision to specify a + specific revision. + +'gc':: + Compress $GIT_DIR/svn//unhandled.log files and remove + $GIT_DIR/svn//index files. + +'reset':: + Undoes the effects of 'fetch' back to the specified revision. + This allows you to re-'fetch' an SVN revision. Normally the + contents of an SVN revision should never change and 'reset' + should not be necessary. However, if SVN permissions change, + or if you alter your --ignore-paths option, a 'fetch' may fail + with "not found in commit" (file not previously visible) or + "checksum mismatch" (missed a modification). If the problem + file cannot be ignored forever (with --ignore-paths) the only + way to repair the repo is to use 'reset'. ++ +Only the rev_map and refs/remotes/git-svn are changed (see +'$GIT_DIR/svn/\**/.rev_map.*' in the FILES section below for details). +Follow 'reset' with a 'fetch' and then 'git reset' or 'git rebase' to +move local branches onto the new tree. + +-r ;; +--revision=;; + Specify the most recent revision to keep. All later revisions + are discarded. +-p;; +--parent;; + Discard the specified revision as well, keeping the nearest + parent instead. +Example:;; +Assume you have local changes in "master", but you need to refetch "r2". ++ +------------ + r1---r2---r3 remotes/git-svn + \ + A---B master +------------ ++ +Fix the ignore-paths or SVN permissions problem that caused "r2" to +be incomplete in the first place. Then: ++ +[verse] +git svn reset -r2 -p +git svn fetch ++ +------------ + r1---r2'--r3' remotes/git-svn + \ + r2---r3---A---B master +------------ ++ +Then fixup "master" with 'git rebase'. +Do NOT use 'git merge' or your history will not be compatible with a +future 'dcommit'! ++ +[verse] +git rebase --onto remotes/git-svn A^ master ++ +------------ + r1---r2'--r3' remotes/git-svn + \ + A'--B' master +------------ + +OPTIONS +------- + +--shared[=(false|true|umask|group|all|world|everybody)]:: +--template=:: + Only used with the 'init' command. + These are passed directly to 'git init'. + +-r :: +--revision :: + Used with the 'fetch' command. ++ +This allows revision ranges for partial/cauterized history +to be supported. $NUMBER, $NUMBER1:$NUMBER2 (numeric ranges), +$NUMBER:HEAD, and BASE:$NUMBER are all supported. ++ +This can allow you to make partial mirrors when running fetch; +but is generally not recommended because history will be skipped +and lost. + +-:: +--stdin:: + Only used with the 'set-tree' command. ++ +Read a list of commits from stdin and commit them in reverse +order. Only the leading sha1 is read from each line, so +'git rev-list --pretty=oneline' output can be used. + +--rmdir:: + Only used with the 'dcommit', 'set-tree' and 'commit-diff' commands. ++ +Remove directories from the SVN tree if there are no files left +behind. SVN can version empty directories, and they are not +removed by default if there are no files left in them. Git +cannot version empty directories. Enabling this flag will make +the commit to SVN act like Git. ++ +[verse] +config key: svn.rmdir + +-e:: +--edit:: + Only used with the 'dcommit', 'set-tree' and 'commit-diff' commands. ++ +Edit the commit message before committing to SVN. This is off by +default for objects that are commits, and forced on when committing +tree objects. ++ +[verse] +config key: svn.edit + +-l:: +--find-copies-harder:: + Only used with the 'dcommit', 'set-tree' and 'commit-diff' commands. ++ +They are both passed directly to 'git diff-tree'; see +linkgit:git-diff-tree[1] for more information. ++ +[verse] +config key: svn.l +config key: svn.findcopiesharder + +-A:: +--authors-file=:: + Syntax is compatible with the file used by 'git cvsimport' but + an empty email address can be supplied with '<>': ++ +------------------------------------------------------------------------ + loginname = Joe User +------------------------------------------------------------------------ ++ +If this option is specified and 'git svn' encounters an SVN +committer name that does not exist in the authors-file, 'git svn' +will abort operation. The user will then have to add the +appropriate entry. Re-running the previous 'git svn' command +after the authors-file is modified should continue operation. ++ +[verse] +config key: svn.authorsfile + +--authors-prog=:: + If this option is specified, for each SVN committer name that + does not exist in the authors file, the given file is executed + with the committer name as the first argument. The program is + expected to return a single line of the form "Name " or + "Name <>", which will be treated as if included in the authors + file. ++ +Due to historical reasons a relative 'filename' is first searched +relative to the current directory for 'init' and 'clone' and relative +to the root of the working tree for 'fetch'. If 'filename' is +not found, it is searched like any other command in '$PATH'. ++ +[verse] +config key: svn.authorsProg + +-q:: +--quiet:: + Make 'git svn' less verbose. Specify a second time to make it + even less verbose. + +-m:: +--merge:: +-s:: +--strategy=:: +-p:: +--rebase-merges:: + These are only used with the 'dcommit' and 'rebase' commands. ++ +Passed directly to 'git rebase' when using 'dcommit' if a +'git reset' cannot be used (see 'dcommit'). + +-n:: +--dry-run:: + This can be used with the 'dcommit', 'rebase', 'branch' and + 'tag' commands. ++ +For 'dcommit', print out the series of Git arguments that would show +which diffs would be committed to SVN. ++ +For 'rebase', display the local branch associated with the upstream svn +repository associated with the current branch and the URL of svn +repository that will be fetched from. ++ +For 'branch' and 'tag', display the urls that will be used for copying when +creating the branch or tag. + +--use-log-author:: + When retrieving svn commits into Git (as part of 'fetch', 'rebase', or + 'dcommit' operations), look for the first `From:` line or `Signed-off-by` trailer + in the log message and use that as the author string. ++ +[verse] +config key: svn.useLogAuthor + +--add-author-from:: + When committing to svn from Git (as part of 'set-tree' or 'dcommit' + operations), if the existing log message doesn't already have a + `From:` or `Signed-off-by` trailer, append a `From:` line based on the + Git commit's author string. If you use this, then `--use-log-author` + will retrieve a valid author string for all commits. ++ +[verse] +config key: svn.addAuthorFrom + +ADVANCED OPTIONS +---------------- + +-i:: +--id :: + This sets GIT_SVN_ID (instead of using the environment). This + allows the user to override the default refname to fetch from + when tracking a single URL. The 'log' and 'dcommit' commands + no longer require this switch as an argument. + +-R:: +--svn-remote :: + Specify the [svn-remote ""] section to use, + this allows SVN multiple repositories to be tracked. + Default: "svn" + +--follow-parent:: + This option is only relevant if we are tracking branches (using + one of the repository layout options --trunk, --tags, + --branches, --stdlayout). For each tracked branch, try to find + out where its revision was copied from, and set + a suitable parent in the first Git commit for the branch. + This is especially helpful when we're tracking a directory + that has been moved around within the repository. If this + feature is disabled, the branches created by 'git svn' will all + be linear and not share any history, meaning that there will be + no information on where branches were branched off or merged. + However, following long/convoluted histories can take a long + time, so disabling this feature may speed up the cloning + process. This feature is enabled by default, use + --no-follow-parent to disable it. ++ +[verse] +config key: svn.followparent + +CONFIG FILE-ONLY OPTIONS +------------------------ + +svn.noMetadata:: +svn-remote..noMetadata:: + This gets rid of the 'git-svn-id:' lines at the end of every commit. ++ +This option can only be used for one-shot imports as 'git svn' +will not be able to fetch again without metadata. Additionally, +if you lose your '$GIT_DIR/svn/\**/.rev_map.*' files, 'git svn' will not +be able to rebuild them. ++ +The 'git svn log' command will not work on repositories using +this, either. Using this conflicts with the 'useSvmProps' +option for (hopefully) obvious reasons. ++ +This option is NOT recommended as it makes it difficult to track down +old references to SVN revision numbers in existing documentation, bug +reports, and archives. If you plan to eventually migrate from SVN to +Git and are certain about dropping SVN history, consider +https://github.com/newren/git-filter-repo[git-filter-repo] instead. +filter-repo also allows reformatting of metadata for ease-of-reading +and rewriting authorship info for non-"svn.authorsFile" users. + +svn.useSvmProps:: +svn-remote..useSvmProps:: + This allows 'git svn' to re-map repository URLs and UUIDs from + mirrors created using SVN::Mirror (or svk) for metadata. ++ +If an SVN revision has a property, "svm:headrev", it is likely +that the revision was created by SVN::Mirror (also used by SVK). +The property contains a repository UUID and a revision. We want +to make it look like we are mirroring the original URL, so +introduce a helper function that returns the original identity +URL and UUID, and use it when generating metadata in commit +messages. + +svn.useSvnsyncProps:: +svn-remote..useSvnsyncprops:: + Similar to the useSvmProps option; this is for users + of the svnsync(1) command distributed with SVN 1.4.x and + later. + +svn-remote..rewriteRoot:: + This allows users to create repositories from alternate + URLs. For example, an administrator could run 'git svn' on the + server locally (accessing via file://) but wish to distribute + the repository with a public http:// or svn:// URL in the + metadata so users of it will see the public URL. + +svn-remote..rewriteUUID:: + Similar to the useSvmProps option; this is for users who need + to remap the UUID manually. This may be useful in situations + where the original UUID is not available via either useSvmProps + or useSvnsyncProps. + +svn-remote..pushurl:: + + Similar to Git's `remote..pushurl`, this key is designed + to be used in cases where 'url' points to an SVN repository + via a read-only transport, to provide an alternate read/write + transport. It is assumed that both keys point to the same + repository. Unlike 'commiturl', 'pushurl' is a base path. If + either 'commiturl' or 'pushurl' could be used, 'commiturl' + takes precedence. + +svn.brokenSymlinkWorkaround:: + This disables potentially expensive checks to workaround + broken symlinks checked into SVN by broken clients. Set this + option to "false" if you track a SVN repository with many + empty blobs that are not symlinks. This option may be changed + while 'git svn' is running and take effect on the next + revision fetched. If unset, 'git svn' assumes this option to + be "true". + +svn.pathnameencoding:: + This instructs git svn to recode pathnames to a given encoding. + It can be used by windows users and by those who work in non-utf8 + locales to avoid corrupted file names with non-ASCII characters. + Valid encodings are the ones supported by Perl's Encode module. + +svn-remote..automkdirs:: + Normally, the "git svn clone" and "git svn rebase" commands + attempt to recreate empty directories that are in the + Subversion repository. If this option is set to "false", then + empty directories will only be created if the "git svn mkdirs" + command is run explicitly. If unset, 'git svn' assumes this + option to be "true". + +Since the noMetadata, rewriteRoot, rewriteUUID, useSvnsyncProps and useSvmProps +options all affect the metadata generated and used by 'git svn'; they +*must* be set in the configuration file before any history is imported +and these settings should never be changed once they are set. + +Additionally, only one of these options can be used per svn-remote +section because they affect the 'git-svn-id:' metadata line, except +for rewriteRoot and rewriteUUID which can be used together. + + +BASIC EXAMPLES +-------------- + +Tracking and contributing to the trunk of a Subversion-managed project +(ignoring tags and branches): + +------------------------------------------------------------------------ +# Clone a repo (like git clone): + git svn clone http://svn.example.com/project/trunk +# Enter the newly cloned directory: + cd trunk +# You should be on master branch, double-check with 'git branch' + git branch +# Do some work and commit locally to Git: + git commit ... +# Something is committed to SVN, rebase your local changes against the +# latest changes in SVN: + git svn rebase +# Now commit your changes (that were committed previously using Git) to SVN, +# as well as automatically updating your working HEAD: + git svn dcommit +# Append svn:ignore settings to the default Git exclude file: + git svn show-ignore >> .git/info/exclude +------------------------------------------------------------------------ + +Tracking and contributing to an entire Subversion-managed project +(complete with a trunk, tags and branches): + +------------------------------------------------------------------------ +# Clone a repo with standard SVN directory layout (like git clone): + git svn clone http://svn.example.com/project --stdlayout --prefix svn/ +# Or, if the repo uses a non-standard directory layout: + git svn clone http://svn.example.com/project -T tr -b branch -t tag --prefix svn/ +# View all branches and tags you have cloned: + git branch -r +# Create a new branch in SVN + git svn branch waldo +# Reset your master to trunk (or any other branch, replacing 'trunk' +# with the appropriate name): + git reset --hard svn/trunk +# You may only dcommit to one branch/tag/trunk at a time. The usage +# of dcommit/rebase/show-ignore should be the same as above. +------------------------------------------------------------------------ + +The initial 'git svn clone' can be quite time-consuming +(especially for large Subversion repositories). If multiple +people (or one person with multiple machines) want to use +'git svn' to interact with the same Subversion repository, you can +do the initial 'git svn clone' to a repository on a server and +have each person clone that repository with 'git clone': + +------------------------------------------------------------------------ +# Do the initial import on a server + ssh server "cd /pub && git svn clone http://svn.example.com/project [options...]" +# Clone locally - make sure the refs/remotes/ space matches the server + mkdir project + cd project + git init + git remote add origin server:/pub/project + git config --replace-all remote.origin.fetch '+refs/remotes/*:refs/remotes/*' + git fetch +# Prevent fetch/pull from remote Git server in the future, +# we only want to use git svn for future updates + git config --remove-section remote.origin +# Create a local branch from one of the branches just fetched + git checkout -b master FETCH_HEAD +# Initialize 'git svn' locally (be sure to use the same URL and +# --stdlayout/-T/-b/-t/--prefix options as were used on server) + git svn init http://svn.example.com/project [options...] +# Pull the latest changes from Subversion + git svn rebase +------------------------------------------------------------------------ + +REBASE VS. PULL/MERGE +--------------------- +Prefer to use 'git svn rebase' or 'git rebase', rather than +'git pull' or 'git merge' to synchronize unintegrated commits with a 'git svn' +branch. Doing so will keep the history of unintegrated commits linear with +respect to the upstream SVN repository and allow the use of the preferred +'git svn dcommit' subcommand to push unintegrated commits back into SVN. + +Originally, 'git svn' recommended that developers pulled or merged from +the 'git svn' branch. This was because the author favored +`git svn set-tree B` to commit a single head rather than the +`git svn set-tree A..B` notation to commit multiple commits. Use of +'git pull' or 'git merge' with `git svn set-tree A..B` will cause non-linear +history to be flattened when committing into SVN and this can lead to merge +commits unexpectedly reversing previous commits in SVN. + +MERGE TRACKING +-------------- +While 'git svn' can track +copy history (including branches and tags) for repositories adopting a +standard layout, it cannot yet represent merge history that happened +inside git back upstream to SVN users. Therefore it is advised that +users keep history as linear as possible inside Git to ease +compatibility with SVN (see the CAVEATS section below). + +HANDLING OF SVN BRANCHES +------------------------ +If 'git svn' is configured to fetch branches (and --follow-branches +is in effect), it sometimes creates multiple Git branches for one +SVN branch, where the additional branches have names of the form +'branchname@nnn' (with nnn an SVN revision number). These additional +branches are created if 'git svn' cannot find a parent commit for the +first commit in an SVN branch, to connect the branch to the history of +the other branches. + +Normally, the first commit in an SVN branch consists +of a copy operation. 'git svn' will read this commit to get the SVN +revision the branch was created from. It will then try to find the +Git commit that corresponds to this SVN revision, and use that as the +parent of the branch. However, it is possible that there is no suitable +Git commit to serve as parent. This will happen, among other reasons, +if the SVN branch is a copy of a revision that was not fetched by 'git +svn' (e.g. because it is an old revision that was skipped with +`--revision`), or if in SVN a directory was copied that is not tracked +by 'git svn' (such as a branch that is not tracked at all, or a +subdirectory of a tracked branch). In these cases, 'git svn' will still +create a Git branch, but instead of using an existing Git commit as the +parent of the branch, it will read the SVN history of the directory the +branch was copied from and create appropriate Git commits. This is +indicated by the message "Initializing parent: ". + +Additionally, it will create a special branch named +'@', where is the SVN revision +number the branch was copied from. This branch will point to the newly +created parent commit of the branch. If in SVN the branch was deleted +and later recreated from a different version, there will be multiple +such branches with an '@'. + +Note that this may mean that multiple Git commits are created for a +single SVN revision. + +An example: in an SVN repository with a standard +trunk/tags/branches layout, a directory trunk/sub is created in r.100. +In r.200, trunk/sub is branched by copying it to branches/. 'git svn +clone -s' will then create a branch 'sub'. It will also create new Git +commits for r.100 through r.199 and use these as the history of branch +'sub'. Thus there will be two Git commits for each revision from r.100 +to r.199 (one containing trunk/, one containing trunk/sub/). Finally, +it will create a branch 'sub@200' pointing to the new parent commit of +branch 'sub' (i.e. the commit for r.200 and trunk/sub/). + +CAVEATS +------- + +For the sake of simplicity and interoperating with Subversion, +it is recommended that all 'git svn' users clone, fetch and dcommit +directly from the SVN server, and avoid all 'git clone'/'pull'/'merge'/'push' +operations between Git repositories and branches. The recommended +method of exchanging code between Git branches and users is +'git format-patch' and 'git am', or just 'dcommit'ing to the SVN repository. + +Running 'git merge' or 'git pull' is NOT recommended on a branch you +plan to 'dcommit' from because Subversion users cannot see any +merges you've made. Furthermore, if you merge or pull from a Git branch +that is a mirror of an SVN branch, 'dcommit' may commit to the wrong +branch. + +If you do merge, note the following rule: 'git svn dcommit' will +attempt to commit on top of the SVN commit named in +------------------------------------------------------------------------ +git log --grep=^git-svn-id: --first-parent -1 +------------------------------------------------------------------------ +You 'must' therefore ensure that the most recent commit of the branch +you want to dcommit to is the 'first' parent of the merge. Chaos will +ensue otherwise, especially if the first parent is an older commit on +the same SVN branch. + +'git clone' does not clone branches under the refs/remotes/ hierarchy or +any 'git svn' metadata, or config. So repositories created and managed with +using 'git svn' should use 'rsync' for cloning, if cloning is to be done +at all. + +Since 'dcommit' uses rebase internally, any Git branches you 'git push' to +before 'dcommit' on will require forcing an overwrite of the existing ref +on the remote repository. This is generally considered bad practice, +see the linkgit:git-push[1] documentation for details. + +Do not use the --amend option of linkgit:git-commit[1] on a change you've +already dcommitted. It is considered bad practice to --amend commits +you've already pushed to a remote repository for other users, and +dcommit with SVN is analogous to that. + +When cloning an SVN repository, if none of the options for describing +the repository layout is used (--trunk, --tags, --branches, +--stdlayout), 'git svn clone' will create a Git repository with +completely linear history, where branches and tags appear as separate +directories in the working copy. While this is the easiest way to get a +copy of a complete repository, for projects with many branches it will +lead to a working copy many times larger than just the trunk. Thus for +projects using the standard directory structure (trunk/branches/tags), +it is recommended to clone with option `--stdlayout`. If the project +uses a non-standard structure, and/or if branches and tags are not +required, it is easiest to only clone one directory (typically trunk), +without giving any repository layout options. If the full history with +branches and tags is required, the options `--trunk` / `--branches` / +`--tags` must be used. + +When using multiple --branches or --tags, 'git svn' does not automatically +handle name collisions (for example, if two branches from different paths have +the same name, or if a branch and a tag have the same name). In these cases, +use 'init' to set up your Git repository then, before your first 'fetch', edit +the $GIT_DIR/config file so that the branches and tags are associated +with different name spaces. For example: + + branches = stable/*:refs/remotes/svn/stable/* + branches = debug/*:refs/remotes/svn/debug/* + +CONFIGURATION +------------- + +'git svn' stores [svn-remote] configuration information in the +repository $GIT_DIR/config file. It is similar the core Git +[remote] sections except 'fetch' keys do not accept glob +arguments; but they are instead handled by the 'branches' +and 'tags' keys. Since some SVN repositories are oddly +configured with multiple projects glob expansions such those +listed below are allowed: + +------------------------------------------------------------------------ +[svn-remote "project-a"] + url = http://server.org/svn + fetch = trunk/project-a:refs/remotes/project-a/trunk + branches = branches/*/project-a:refs/remotes/project-a/branches/* + branches = branches/release_*:refs/remotes/project-a/branches/release_* + branches = branches/re*se:refs/remotes/project-a/branches/* + tags = tags/*/project-a:refs/remotes/project-a/tags/* +------------------------------------------------------------------------ + +Keep in mind that the `*` (asterisk) wildcard of the local ref +(right of the `:`) *must* be the farthest right path component; +however the remote wildcard may be anywhere as long as it's an +independent path component (surrounded by `/` or EOL). This +type of configuration is not automatically created by 'init' and +should be manually entered with a text-editor or using 'git config'. + +Also note that only one asterisk is allowed per word. For example: + + branches = branches/re*se:refs/remotes/project-a/branches/* + +will match branches 'release', 'rese', 're123se', however + + branches = branches/re*s*e:refs/remotes/project-a/branches/* + +will produce an error. + +It is also possible to fetch a subset of branches or tags by using a +comma-separated list of names within braces. For example: + +------------------------------------------------------------------------ +[svn-remote "huge-project"] + url = http://server.org/svn + fetch = trunk/src:refs/remotes/trunk + branches = branches/{red,green}/src:refs/remotes/project-a/branches/* + tags = tags/{1.0,2.0}/src:refs/remotes/project-a/tags/* +------------------------------------------------------------------------ + +Multiple fetch, branches, and tags keys are supported: + +------------------------------------------------------------------------ +[svn-remote "messy-repo"] + url = http://server.org/svn + fetch = trunk/project-a:refs/remotes/project-a/trunk + fetch = branches/demos/june-project-a-demo:refs/remotes/project-a/demos/june-demo + branches = branches/server/*:refs/remotes/project-a/branches/* + branches = branches/demos/2011/*:refs/remotes/project-a/2011-demos/* + tags = tags/server/*:refs/remotes/project-a/tags/* +------------------------------------------------------------------------ + +Creating a branch in such a configuration requires disambiguating which +location to use using the -d or --destination flag: + +------------------------------------------------------------------------ +$ git svn branch -d branches/server release-2-3-0 +------------------------------------------------------------------------ + +Note that git-svn keeps track of the highest revision in which a branch +or tag has appeared. If the subset of branches or tags is changed after +fetching, then $GIT_DIR/svn/.metadata must be manually edited to remove +(or reset) branches-maxRev and/or tags-maxRev as appropriate. + +FILES +----- +$GIT_DIR/svn/\**/.rev_map.*:: + Mapping between Subversion revision numbers and Git commit + names. In a repository where the noMetadata option is not set, + this can be rebuilt from the git-svn-id: lines that are at the + end of every commit (see the 'svn.noMetadata' section above for + details). ++ +'git svn fetch' and 'git svn rebase' automatically update the rev_map +if it is missing or not up to date. 'git svn reset' automatically +rewinds it. + +BUGS +---- + +We ignore all SVN properties except svn:executable. Any unhandled +properties are logged to $GIT_DIR/svn//unhandled.log + +Renamed and copied directories are not detected by Git and hence not +tracked when committing to SVN. I do not plan on adding support for +this as it's quite difficult and time-consuming to get working for all +the possible corner cases (Git doesn't do it, either). Committing +renamed and copied files is fully supported if they're similar enough +for Git to detect them. + +In SVN, it is possible (though discouraged) to commit changes to a tag +(because a tag is just a directory copy, thus technically the same as a +branch). When cloning an SVN repository, 'git svn' cannot know if such a +commit to a tag will happen in the future. Thus it acts conservatively +and imports all SVN tags as branches, prefixing the tag name with 'tags/'. + +SEE ALSO +-------- +linkgit:git-rebase[1] + +GIT +--- +Part of the linkgit:git[1] suite -- cgit v1.2.3