diff options
Diffstat (limited to '')
| -rwxr-xr-x | src/gitolite-shell | 262 |
1 files changed, 262 insertions, 0 deletions
diff --git a/src/gitolite-shell b/src/gitolite-shell new file mode 100755 index 0000000..072e0ff --- /dev/null +++ b/src/gitolite-shell @@ -0,0 +1,262 @@ +#!/usr/bin/perl + +# gitolite shell, invoked from ~/.ssh/authorized_keys +# ---------------------------------------------------------------------- + +use FindBin; + +BEGIN { $ENV{GL_BINDIR} = $FindBin::RealBin; } +BEGIN { $ENV{GL_LIBDIR} = "$ENV{GL_BINDIR}/lib"; } +use lib $ENV{GL_LIBDIR}; + +# set HOME +BEGIN { $ENV{HOME} = $ENV{GITOLITE_HTTP_HOME} if $ENV{GITOLITE_HTTP_HOME}; } + +use Gitolite::Rc; +use Gitolite::Common; +use Gitolite::Conf::Load; + +use strict; +use warnings; + +# the main() sub expects ssh-ish things; set them up... +my $id = ''; +if ( exists $ENV{G3T_USER} ) { + $id = in_file(); # file:// masquerading as ssh:// for easy testing +} elsif ( exists $ENV{SSH_CONNECTION} ) { + $id = in_ssh(); +} elsif ( exists $ENV{REQUEST_URI} ) { + $id = in_http(); +} else { + _die "who the *heck* are you?"; +} + +# sanity... +my $soc = $ENV{SSH_ORIGINAL_COMMAND}; +$soc =~ s/[\n\r]+/<<newline>>/g; +_die "I don't like newlines in the command: '$soc'\n" if $ENV{SSH_ORIGINAL_COMMAND} ne $soc; + +# allow gitolite-shell to be used as "$SHELL". Experts only; no support, no docs +if (@ARGV and $ARGV[0] eq '-c') { + shift; + $ARGV[0] =~ s/^$0 // or _die "unknown git/gitolite command: '$ARGV[0]'"; +} + +# the INPUT trigger massages @ARGV and $ENV{SSH_ORIGINAL_COMMAND} as needed +trigger('INPUT'); + +main($id); + +gl_log('END') if $$ == $ENV{GL_TID}; + +exit 0; + +# ---------------------------------------------------------------------- + +sub in_file { + gl_log( 'file', "ARGV=" . join( ",", @ARGV ), "SOC=$ENV{SSH_ORIGINAL_COMMAND}" ); + + if ( $ENV{SSH_ORIGINAL_COMMAND} =~ /git-\w+-pack/ ) { + print STDERR "TRACE: gsh(", join( ")(", @ARGV ), ")\n"; + print STDERR "TRACE: gsh(SOC=$ENV{SSH_ORIGINAL_COMMAND})\n"; + } + return 'file'; +} + +sub in_http { + http_setup_die_handler(); + + _die "GITOLITE_HTTP_HOME not set" unless $ENV{GITOLITE_HTTP_HOME}; + + _die "fallback to DAV not supported" if $ENV{REQUEST_METHOD} eq 'PROPFIND'; + + # fake out SSH_ORIGINAL_COMMAND and SSH_CONNECTION when called via http, + # so the rest of the code stays the same (except the exec at the end). + http_simulate_ssh_connection(); + $ENV{SSH_ORIGINAL_COMMAND} ||= ''; + + $ENV{REMOTE_USER} ||= $rc{HTTP_ANON_USER}; + @ARGV = ( $ENV{REMOTE_USER} ); + + my $ip; + ( $ip = $ENV{SSH_CONNECTION} || '(no-IP)' ) =~ s/ .*//; + + gl_log( 'http', "ARGV=" . join( ",", @ARGV ), "SOC=" . ( $ENV{SSH_ORIGINAL_COMMAND} || '' ), "FROM=$ip" ); + + return 'http'; +} + +sub in_ssh { + my $ip; + ( $ip = $ENV{SSH_CONNECTION} || '(no-IP)' ) =~ s/ .*//; + + gl_log( 'ssh', "ARGV=" . join( ",", @ARGV ), "SOC=" . ( $ENV{SSH_ORIGINAL_COMMAND} || '' ), "FROM=$ip" ); + + $ENV{SSH_ORIGINAL_COMMAND} ||= ''; + + return $ip; +} + +# ---------------------------------------------------------------------- + +# call this once you are sure arg-1 is the username and SSH_ORIGINAL_COMMAND +# has been setup (even if it's not actually coming via ssh). +sub main { + my $id = shift; + + # set up the user + my $user = $ENV{GL_USER} = shift @ARGV; + + # set up the repo and the attempted access + my ( $verb, $repo ) = parse_soc(); # returns only for git commands + Gitolite::Conf::Load::sanity($repo, $REPONAME_PATT); + $ENV{GL_REPO} = $repo; + my $aa = ( $verb =~ 'upload' ? 'R' : 'W' ); + + # set up env vars from options set for this repo + env_options($repo); + + # auto-create? + if ( repo_missing($repo) and access( $repo, $user, '^C', 'any' ) !~ /DENIED/ ) { + require Gitolite::Conf::Store; + Gitolite::Conf::Store->import; + new_wild_repo( $repo, $user, $aa ); + gl_log( 'create', $repo, $user, $aa ); + } + + # a ref of 'any' signifies that this is a pre-git check, where we don't + # yet know the ref that will be eventually pushed (and even that won't + # apply if it's a read operation). See the matching code in access() for + # more information. + unless ( $ENV{GL_BYPASS_ACCESS_CHECKS} ) { + my $ret = access( $repo, $user, $aa, 'any' ); + trigger( 'ACCESS_1', $repo, $user, $aa, 'any', $ret ); + _die $ret . "\n(or you mis-spelled the reponame)" if $ret =~ /DENIED/; + + gl_log( "pre_git", $repo, $user, $aa, 'any', $ret ); + } + + trigger( 'PRE_GIT', $repo, $user, $aa, 'any', $verb ); + if ( $ENV{REQUEST_URI} ) { + _system( "git", "http-backend" ); + } else { + my $repodir = "'$rc{GL_REPO_BASE}/$repo.git'"; + _system( "git", "shell", "-c", "$verb $repodir" ); + } + trigger( 'POST_GIT', $repo, $user, $aa, 'any', $verb ); +} + +# ---------------------------------------------------------------------- + +sub parse_soc { + my $soc = $ENV{SSH_ORIGINAL_COMMAND}; + $soc ||= 'info'; + + my $git_commands = "git-upload-pack|git-receive-pack|git-upload-archive"; + # simplify the regex; we'll handle all the reponame nuances later + if ( $soc =~ m(^($git_commands) '?/?(.*?)'?$) ) { + my ( $verb, $repo ) = ( $1, $2 ); + trace( 2, "git command", $soc ); + + # clean up the repo name; first extract the trace level if supplied + # (and no, you can't have a trace level *and* a trailing slash). + $ENV{D} = $1 if $repo =~ s/\.git(\d)$//; + # and then the git-daemon-compatibility trailers + $repo =~ s(/$)(); + $repo =~ s(\.git$)(); + + _die "invalid repo name: '$repo'" if $repo !~ $REPONAME_PATT; + return ( $verb, $repo ); + } + + # after this we should not return; caller expects us to handle it all here + # and exit out + + my @words = split ' ', $soc; + if ( $rc{COMMANDS}{ $words[0] } ) { + if ( $rc{COMMANDS}{ $words[0] } ne 'ua' ) { + _die "suspicious characters loitering about '$soc'" if $soc !~ $REMOTE_COMMAND_PATT; + _die "no relative paths allowed anywhere!" if $soc =~ m(\.\./); + } + trace( 2, "gitolite command", $soc ); + _system( "gitolite", @words ); + exit 0; + } + + _die "unknown git/gitolite command: '$soc'"; +} + +# ---------------------------------------------------------------------- +# helper functions for "in_http" + +sub http_setup_die_handler { + + $SIG{__DIE__} = sub { + my $service = ( $ENV{SSH_ORIGINAL_COMMAND} =~ /git-receive-pack/ ? 'git-receive-pack' : 'git-upload-pack' ); + my $message = shift; chomp($message); + print STDERR "$message\n"; + + http_print_headers($service); + + # format the service response, then the message. With initial + # help from Ilari and then a more detailed email from Shawn... + $service = "# service=$service\n"; $message = "ERR $message\n"; + $service = sprintf( "%04X", length($service) + 4 ) . "$service"; # no CRLF on this one + $message = sprintf( "%04X", length($message) + 4 ) . "$message"; + + print $service; + print "0000"; # flush-pkt, apparently + print $message; + print STDERR $service; + print STDERR $message; + exit 0; # if it's ok for die_webcgi in git.git/http-backend.c, it's ok for me ;-) + } +} + +sub http_simulate_ssh_connection { + # these patterns indicate normal git usage; see "services[]" in + # http-backend.c for how I got that. Also note that "info" is overloaded; + # git uses "info/refs...", while gitolite uses "info" or "info?...". So + # there's a "/" after info in the list below + if ( $ENV{PATH_INFO} =~ m(^/(.*)/(HEAD$|info/refs$|objects/|git-(?:upload|receive)-pack$)) ) { + my $repo = $1; + my $verb = ( $ENV{REQUEST_URI} =~ /git-receive-pack/ ) ? 'git-receive-pack' : 'git-upload-pack'; + $ENV{SSH_ORIGINAL_COMMAND} = "$verb '$repo'"; + } else { + # this is one of our custom commands; could be anything really, + # because of the adc feature + my ($verb) = ( $ENV{PATH_INFO} =~ m(^/(\S+)) ); + my $args = $ENV{QUERY_STRING}; + $args =~ s/\+/ /g; + $args =~ s/%([0-9A-Fa-f]{2})/chr(hex($1))/eg; + $ENV{SSH_ORIGINAL_COMMAND} = $verb; + $ENV{SSH_ORIGINAL_COMMAND} .= " $args" if $args; + http_print_headers(); # in preparation for the eventual output! + + # we also need to pipe STDERR out via STDOUT, else the user doesn't see those messages! + open(STDERR, ">&STDOUT") or _die "Can't dup STDOUT: $!"; + } + $ENV{SSH_CONNECTION} = "$ENV{REMOTE_ADDR} $ENV{REMOTE_PORT} $ENV{SERVER_ADDR} $ENV{SERVER_PORT}"; +} + +my $http_headers_printed = 0; + +sub http_print_headers { + my ( $service, $code, $text ) = @_; + + return if $http_headers_printed++; + $code ||= 200; + $text ||= "OK - gitolite"; + + $|++; + print "Status: $code $text\r\n"; + print "Expires: Fri, 01 Jan 1980 00:00:00 GMT\r\n"; + print "Pragma: no-cache\r\n"; + print "Cache-Control: no-cache, max-age=0, must-revalidate\r\n"; + if ($service) { + print "Content-Type: application/x-$service-advertisement\r\n"; + } else { + print "Content-Type: text/plain\r\n"; + } + print "\r\n"; +} |