#!/bin/sh

# ----------------------------------------------------------------------
# post-receive hook to adopt push certs into 'refs/push-certs'

# Collects the cert blob on push and saves it, then, if a certain number of
# signed pushes have been seen, processes all the "saved" blobs in one go,
# adding them to the special ref 'refs/push-certs'.  This is done in a way
# that allows searching for all the certs pertaining to one specific branch
# (thanks to Junio Hamano for this idea plus general brainstorming).

# The "collection" happens only if $GIT_PUSH_CERT_NONCE_STATUS = OK; again,
# thanks to Junio for pointing this out; see [1]
#
# [1]: https://groups.google.com/forum/#!topic/gitolite/7cSrU6JorEY

# WARNINGS:
#   Does not check that GIT_PUSH_CERT_STATUS = "G".  If you want to check that
#   and FAIL the push, you'll have to write a simple pre-receive hook
#   (post-receive is not the place for that; see 'man githooks').
#
#   Gitolite users: failing the hook cannot be done as a VREF because git does
#   not set those environment variables in the update hook.  You'll have to
#   write a trivial pre-receive hook and add that in.

# Relevant gitolite doc links:
#   repo-specific environment variables
#       http://gitolite.com/gitolite/dev-notes.html#rsev
#   repo-specific hooks
#       http://gitolite.com/gitolite/non-core.html#rsh
#       http://gitolite.com/gitolite/cookbook.html#v3.6-variation-repo-specific-hooks

# Environment:
#   GIT_PUSH_CERT_NONCE_STATUS should be "OK" (as mentioned above)
#
#   GL_OPTIONS_GPC_PENDING (optional; defaults to 1).  This is the number of
#   git push certs that should be waiting in order to trigger the post
#   processing.  You can set it within gitolite like so:
#
#       repo foo bar    # or maybe just 'repo @all'
#           option ENV.GPC_PENDING = 5

# Setup:
#   Set up this code as a post-receive hook for whatever repos you need to.
#   Then arrange to have the environment variable GL_OPTION_GPC_PENDING set to
#   some number, as shown above.  (This is only required if you need it to be
#   greater than 1.)  It could of course be different for different repos.
#   Also see "Invocation" section below.

# Invocation:
#   Normally via git (see 'man githooks'), once it is setup as a post-receive
#   hook.
#
#   However, if you set the "pending" limit high, and want to periodically
#   "clean up" pending certs without necessarily waiting for the counter to
#   trip, do the following (untested):
#
#       RB=$(gitolite query-rc GL_REPO_BASE)
#       for r in $(gitolite list-phy-repos)
#       do
#           cd $RB/$repo.git
#           unset GL_OPTIONS_GPC_PENDING    # if it is set higher up
#           hooks/post-receive post_process
#       done
#
#   That will take care of it.

# Using without gitolite:
#   Just set GL_OPTIONS_GPC_PENDING within the script (maybe read it from git
#   config).  Everything else is independent of gitolite.

# ----------------------------------------------------------------------
# make it work on BSD also (but NOT YET TESTED on FreeBSD!)
uname_s=`uname -s`
if [ "$uname_s" = "Linux" ]
then
    _lock() { flock "$@"; }
else
    _lock() { lockf -k "$@"; }
    # I'm assuming other BSDs also have this; I only have FreeBSD.
fi

# ----------------------------------------------------------------------
# standard stuff
die() { echo "$@" >&2; exit 1; }
warn() { echo "$@" >&2; }

# ----------------------------------------------------------------------
# if there are no arguments, we're running as a "post-receive" hook
if [ -z "$1" ]
then
    # ignore if it may be a replay attack
    [ "$GIT_PUSH_CERT_NONCE_STATUS" = "OK" ] || exit 1
    # I don't think "exit 1" does anything in a post-receive anyway, so that's
    # just a symbolic gesture!

    # note the lock file used
    _lock .gpc.lock $0 cat_blob

    # if you want to initiate the post-processing ONLY from outside (for
    # example via cron), comment out the next line.
    exec $0 post_process
fi

# ----------------------------------------------------------------------
# the 'post_process' part; see "Invocation" section in the doc at the top
if [ "$1" = "post_process" ]
then
    # this is the same lock file as above
    _lock .gpc.lock $0 count_and_rotate $$

    [ -d git-push-certs.$$ ] || exit 0

    # but this is a different one
    _lock .gpc.ref.lock $0 update_ref $$

    exit 0
fi

# ----------------------------------------------------------------------
# other values for "$1" are internal use only

if [ "$1" = "cat_blob" ]
then
    mkdir -p git-push-certs
    git cat-file blob $GIT_PUSH_CERT > git-push-certs/$GIT_PUSH_CERT
    echo $GIT_PUSH_CERT >> git-push-certs/.blob.list
fi

if [ "$1" = "count_and_rotate" ]
then
    count=$(ls git-push-certs | wc -l)
    if test $count -ge ${GL_OPTIONS_GPC_PENDING:-1}
    then
        # rotate the directory
        mv git-push-certs git-push-certs.$2
    fi
fi

if [ "$1" = "update_ref" ]
then
    # use a different index file for all this
    GIT_INDEX_FILE=push_certs_index; export GIT_INDEX_FILE

    # prepare the special ref to receive commits
    PUSH_CERTS=refs/push-certs
    if git rev-parse -q --verify $PUSH_CERTS >/dev/null
    then
        git read-tree $PUSH_CERTS
    else
        git read-tree --empty
        T=$(git write-tree)
        C=$(echo 'start' | git commit-tree $T)
        git update-ref $PUSH_CERTS $C
    fi

    # for each cert blob...
    for b in `cat git-push-certs.$2/.blob.list`
    do
        cf=git-push-certs.$2/$b

        # it's highly unlikely that the blob got GC-ed already but write it
        # back anyway, just in case
        B=$(git hash-object -w $cf)

        # bit of a sanity check
        [ "$B" = "$b" ] || warn "this should not happen: $B is not equal to $b"

        # for each ref described within the cert, update the index
        for ref in `cat $cf | egrep '^[a-f0-9]+ [a-f0-9]+ refs/' | cut -f3 -d' '`
        do
            git update-index --add --cacheinfo 100644,$b,$ref
            # we're using the ref name as a "fake" filename, so people can,
            # for example, 'git log refs/push-certs -- refs/heads/master', to
            # see all the push certs pertaining to the master branch.  This
            # idea came from Junio Hamano, the git maintainer (I certainly
            # don't deal with git plumbing enough to have thought of it!)
        done

        T=$(git write-tree)
        C=$( git commit-tree -p $PUSH_CERTS $T < $cf )
        git update-ref $PUSH_CERTS $C

        rm -f $cf
    done
    rm -f git-push-certs.$2/.blob.list
    rmdir git-push-certs.$2
fi