From ca67b09c015d4af3ae3cce12aa72e60941dbb8b5 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 18:29:52 +0200 Subject: Adding debian version 2.06-13+deb12u1. Signed-off-by: Daniel Baumann --- .../disabled/gpxe/src/drivers/net/natsemi.h | 232 +++++++++++++++++++++ 1 file changed, 232 insertions(+) create mode 100644 debian/grub-extras/disabled/gpxe/src/drivers/net/natsemi.h (limited to 'debian/grub-extras/disabled/gpxe/src/drivers/net/natsemi.h') diff --git a/debian/grub-extras/disabled/gpxe/src/drivers/net/natsemi.h b/debian/grub-extras/disabled/gpxe/src/drivers/net/natsemi.h new file mode 100644 index 0000000..ae827ba --- /dev/null +++ b/debian/grub-extras/disabled/gpxe/src/drivers/net/natsemi.h @@ -0,0 +1,232 @@ +FILE_LICENCE ( GPL_ANY ); + +#define NATSEMI_HW_TIMEOUT 400 + +#define TX_RING_SIZE 4 +#define NUM_RX_DESC 4 +#define RX_BUF_SIZE 1536 +#define OWN 0x80000000 +#define DSIZE 0x00000FFF +#define CRC_SIZE 4 + +struct natsemi_tx { + uint32_t link; + uint32_t cmdsts; + uint32_t bufptr; +}; + +struct natsemi_rx { + uint32_t link; + uint32_t cmdsts; + uint32_t bufptr; +}; + +struct natsemi_private { + unsigned short ioaddr; + unsigned short tx_cur; + unsigned short tx_dirty; + unsigned short rx_cur; + struct natsemi_tx tx[TX_RING_SIZE]; + struct natsemi_rx rx[NUM_RX_DESC]; + + /* need to add iobuf as we cannot free iobuf->data in close without this + * alternatively substracting sizeof(head) and sizeof(list_head) can also + * give the same. + */ + struct io_buffer *iobuf[NUM_RX_DESC]; + + /* netdev_tx_complete needs pointer to the iobuf of the data so as to free + * it from the memory. + */ + struct io_buffer *tx_iobuf[TX_RING_SIZE]; + struct spi_bit_basher spibit; + struct spi_device eeprom; + struct nvo_block nvo; +}; + +/* + * Support for fibre connections on Am79C874: + * This phy needs a special setup when connected to a fibre cable. + * http://www.amd.com/files/connectivitysolutions/networking/archivednetworking/22235.pdf + */ +#define PHYID_AM79C874 0x0022561b + +enum { + MII_MCTRL = 0x15, /* mode control register */ + MII_FX_SEL = 0x0001, /* 100BASE-FX (fiber) */ + MII_EN_SCRM = 0x0004, /* enable scrambler (tp) */ +}; + + + +/* values we might find in the silicon revision register */ +#define SRR_DP83815_C 0x0302 +#define SRR_DP83815_D 0x0403 +#define SRR_DP83816_A4 0x0504 +#define SRR_DP83816_A5 0x0505 + +/* NATSEMI: Offsets to the device registers. + * Unlike software-only systems, device drivers interact with complex hardware. + * It's not useful to define symbolic names for every register bit in the + * device. + */ +enum register_offsets { + ChipCmd = 0x00, + ChipConfig = 0x04, + EECtrl = 0x08, + PCIBusCfg = 0x0C, + IntrStatus = 0x10, + IntrMask = 0x14, + IntrEnable = 0x18, + TxRingPtr = 0x20, + TxConfig = 0x24, + RxRingPtr = 0x30, + RxConfig = 0x34, + ClkRun = 0x3C, + WOLCmd = 0x40, + PauseCmd = 0x44, + RxFilterAddr = 0x48, + RxFilterData = 0x4C, + BootRomAddr = 0x50, + BootRomData = 0x54, + SiliconRev = 0x58, + StatsCtrl = 0x5C, + StatsData = 0x60, + RxPktErrs = 0x60, + RxMissed = 0x68, + RxCRCErrs = 0x64, + PCIPM = 0x44, + PhyStatus = 0xC0, + MIntrCtrl = 0xC4, + MIntrStatus = 0xC8, + + /* These are from the spec, around page 78... on a separate table. + */ + PGSEL = 0xCC, + PMDCSR = 0xE4, + TSTDAT = 0xFC, + DSPCFG = 0xF4, + SDCFG = 0x8C, + BasicControl = 0x80, + BasicStatus = 0x84 + +}; + +/* the values for the 'magic' registers above (PGSEL=1) */ +#define PMDCSR_VAL 0x189c /* enable preferred adaptation circuitry */ +#define TSTDAT_VAL 0x0 +#define DSPCFG_VAL 0x5040 +#define SDCFG_VAL 0x008c /* set voltage thresholds for Signal Detect */ +#define DSPCFG_LOCK 0x20 /* coefficient lock bit in DSPCFG */ +#define DSPCFG_COEF 0x1000 /* see coefficient (in TSTDAT) bit in DSPCFG */ +#define TSTDAT_FIXED 0xe8 /* magic number for bad coefficients */ + +/* Bit in ChipCmd. + */ +enum ChipCmdBits { + ChipReset = 0x100, + RxReset = 0x20, + TxReset = 0x10, + RxOff = 0x08, + RxOn = 0x04, + TxOff = 0x02, + TxOn = 0x01 +}; + +enum ChipConfig_bits { + CfgPhyDis = 0x200, + CfgPhyRst = 0x400, + CfgExtPhy = 0x1000, + CfgAnegEnable = 0x2000, + CfgAneg100 = 0x4000, + CfgAnegFull = 0x8000, + CfgAnegDone = 0x8000000, + CfgFullDuplex = 0x20000000, + CfgSpeed100 = 0x40000000, + CfgLink = 0x80000000, +}; + + +/* Bits in the RxMode register. + */ +enum rx_mode_bits { + AcceptErr = 0x20, + AcceptRunt = 0x10, + AcceptBroadcast = 0xC0000000, + AcceptMulticast = 0x00200000, + AcceptAllMulticast = 0x20000000, + AcceptAllPhys = 0x10000000, + AcceptMyPhys = 0x08000000, + RxFilterEnable = 0x80000000 +}; + +/* Bits in network_desc.status + */ +enum desc_status_bits { + DescOwn = 0x80000000, + DescMore = 0x40000000, + DescIntr = 0x20000000, + DescNoCRC = 0x10000000, + DescPktOK = 0x08000000, + RxTooLong = 0x00400000 +}; + +/*Bits in Interrupt Mask register + */ +enum Intr_mask_register_bits { + RxOk = 0x001, + RxErr = 0x004, + TxOk = 0x040, + TxErr = 0x100 +}; + +enum MIntrCtrl_bits { + MICRIntEn = 0x2, +}; + +/* CFG bits [13:16] [18:23] */ +#define CFG_RESET_SAVE 0xfde000 +/* WCSR bits [0:4] [9:10] */ +#define WCSR_RESET_SAVE 0x61f +/* RFCR bits [20] [22] [27:31] */ +#define RFCR_RESET_SAVE 0xf8500000; + +/* Delay between EEPROM clock transitions. + No extra delay is needed with 33Mhz PCI, but future 66Mhz access may need + a delay. */ +#define eeprom_delay(ee_addr) inl(ee_addr) + +enum EEPROM_Ctrl_Bits { + EE_ShiftClk = 0x04, + EE_DataIn = 0x01, + EE_ChipSelect = 0x08, + EE_DataOut = 0x02 +}; + +#define EE_Write0 (EE_ChipSelect) +#define EE_Write1 (EE_ChipSelect | EE_DataIn) + +/* The EEPROM commands include the alway-set leading bit. */ +enum EEPROM_Cmds { + EE_WriteCmd=(5 << 6), EE_ReadCmd=(6 << 6), EE_EraseCmd=(7 << 6), +}; + +/* EEPROM access , values are devices specific + */ +#define EE_CS 0x08 /* EEPROM chip select */ +#define EE_SK 0x04 /* EEPROM shift clock */ +#define EE_DI 0x01 /* Data in */ +#define EE_DO 0x02 /* Data out */ + +/* Offsets within EEPROM (these are word offsets) + */ +#define EE_MAC 7 +#define EE_REG EECtrl + +static const uint8_t natsemi_ee_bits[] = { + [SPI_BIT_SCLK] = EE_SK, + [SPI_BIT_MOSI] = EE_DI, + [SPI_BIT_MISO] = EE_DO, + [SPI_BIT_SS(0)] = EE_CS, +}; + -- cgit v1.2.3