From ca67b09c015d4af3ae3cce12aa72e60941dbb8b5 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 18:29:52 +0200 Subject: Adding debian version 2.06-13+deb12u1. Signed-off-by: Daniel Baumann --- .../disabled/gpxe/src/drivers/net/smc9000.h | 428 +++++++++++++++++++++ 1 file changed, 428 insertions(+) create mode 100644 debian/grub-extras/disabled/gpxe/src/drivers/net/smc9000.h (limited to 'debian/grub-extras/disabled/gpxe/src/drivers/net/smc9000.h') diff --git a/debian/grub-extras/disabled/gpxe/src/drivers/net/smc9000.h b/debian/grub-extras/disabled/gpxe/src/drivers/net/smc9000.h new file mode 100644 index 0000000..22b0e18 --- /dev/null +++ b/debian/grub-extras/disabled/gpxe/src/drivers/net/smc9000.h @@ -0,0 +1,428 @@ +/*------------------------------------------------------------------------ + * smc9000.h + * + * Copyright (C) 1998 by Daniel Engström + * Copyright (C) 1996 by Erik Stahlman + * + * This software may be used and distributed according to the terms + * of the GNU Public License, incorporated herein by reference. + * + * This file contains register information and access macros for + * the SMC91xxx chipset. + * + * Information contained in this file was obtained from the SMC91C94 + * manual from SMC. To get a copy, if you really want one, you can find + * information under www.smsc.com in the components division. + * ( this thanks to advice from Donald Becker ). + * + * Authors + * Daniel Engström + * Erik Stahlman + * + * History + * 96-01-06 Erik Stahlman moved definitions here from main .c + * file + * 96-01-19 Erik Stahlman polished this up some, and added + * better error handling + * 98-09-25 Daniel Engström adjusted for Etherboot + * 98-09-27 Daniel Engström moved some static strings back to the + * main .c file + * --------------------------------------------------------------------------*/ + +FILE_LICENCE ( GPL_ANY ); + +#ifndef _SMC9000_H_ +# define _SMC9000_H_ + +/* I want some simple types */ +typedef unsigned char byte; +typedef unsigned short word; +typedef unsigned long int dword; + +/*--------------------------------------------------------------- + * + * A description of the SMC registers is probably in order here, + * although for details, the SMC datasheet is invaluable. + * + * Basically, the chip has 4 banks of registers ( 0 to 3 ), which + * are accessed by writing a number into the BANK_SELECT register + * ( I also use a SMC_SELECT_BANK macro for this ). + * + * The banks are configured so that for most purposes, bank 2 is all + * that is needed for simple run time tasks. + * ----------------------------------------------------------------------*/ + +/* + * Bank Select Register: + * + * yyyy yyyy 0000 00xx + * xx = bank number + * yyyy yyyy = 0x33, for identification purposes. + */ +#define BANK_SELECT 14 + +/* BANK 0 */ + +#define TCR 0 /* transmit control register */ +#define TCR_ENABLE 0x0001 /* if this is 1, we can transmit */ +#define TCR_FDUPLX 0x0800 /* receive packets sent out */ +#define TCR_STP_SQET 0x1000 /* stop transmitting if Signal quality error */ +#define TCR_MON_CNS 0x0400 /* monitors the carrier status */ +#define TCR_PAD_ENABLE 0x0080 /* pads short packets to 64 bytes */ + +#define TCR_CLEAR 0 /* do NOTHING */ +/* the normal settings for the TCR register : */ +#define TCR_NORMAL (TCR_ENABLE | TCR_PAD_ENABLE) + + +#define EPH_STATUS 2 +#define ES_LINK_OK 0x4000 /* is the link integrity ok ? */ + +#define RCR 4 +#define RCR_SOFTRESET 0x8000 /* resets the chip */ +#define RCR_STRIP_CRC 0x200 /* strips CRC */ +#define RCR_ENABLE 0x100 /* IFF this is set, we can receive packets */ +#define RCR_ALMUL 0x4 /* receive all multicast packets */ +#define RCR_PROMISC 0x2 /* enable promiscuous mode */ + +/* the normal settings for the RCR register : */ +#define RCR_NORMAL (RCR_STRIP_CRC | RCR_ENABLE) +#define RCR_CLEAR 0x0 /* set it to a base state */ + +#define COUNTER 6 +#define MIR 8 +#define MCR 10 +/* 12 is reserved */ + +// Receive/Phy Control Register +/* BANK 0 */ +#define RPC_REG 0x000A +#define RPC_SPEED 0x2000 // When 1 PHY is in 100Mbps mode. +#define RPC_DPLX 0x1000 // When 1 PHY is in Full-Duplex Mode +#define RPC_ANEG 0x0800 // When 1 PHY is in Auto-Negotiate Mode +#define RPC_LSXA_SHFT 5 // Bits to shift LS2A,LS1A,LS0A to lsb +#define RPC_LSXB_SHFT 2 // Bits to get LS2B,LS1B,LS0B to lsb +#define RPC_LED_100_10 (0x00) // LED = 100Mbps OR's with 10Mbps link detect +#define RPC_LED_RES (0x01) // LED = Reserved +#define RPC_LED_10 (0x02) // LED = 10Mbps link detect +#define RPC_LED_FD (0x03) // LED = Full Duplex Mode +#define RPC_LED_TX_RX (0x04) // LED = TX or RX packet occurred +#define RPC_LED_100 (0x05) // LED = 100Mbps link dectect +#define RPC_LED_TX (0x06) // LED = TX packet occurred +#define RPC_LED_RX (0x07) // LED = RX packet occurred +#define RPC_DEFAULT (RPC_ANEG | (RPC_LED_100 << RPC_LSXA_SHFT) | (RPC_LED_FD << RPC_LSXB_SHFT) | RPC_SPEED | RPC_DPLX) + +// Receive/Phy Control Register +/* BANK 0 */ +#define RPC_REG 0x000A +#define RPC_SPEED 0x2000 // When 1 PHY is in 100Mbps mode. +#define RPC_DPLX 0x1000 // When 1 PHY is in Full-Duplex Mode +#define RPC_ANEG 0x0800 // When 1 PHY is in Auto-Negotiate Mode +#define RPC_LSXA_SHFT 5 // Bits to shift LS2A,LS1A,LS0A to lsb +#define RPC_LSXB_SHFT 2 // Bits to get LS2B,LS1B,LS0B to lsb +#define RPC_LED_100_10 (0x00) // LED = 100Mbps OR's with 10Mbps link detect +#define RPC_LED_RES (0x01) // LED = Reserved +#define RPC_LED_10 (0x02) // LED = 10Mbps link detect +#define RPC_LED_FD (0x03) // LED = Full Duplex Mode +#define RPC_LED_TX_RX (0x04) // LED = TX or RX packet occurred +#define RPC_LED_100 (0x05) // LED = 100Mbps link dectect +#define RPC_LED_TX (0x06) // LED = TX packet occurred +#define RPC_LED_RX (0x07) // LED = RX packet occurred +#define RPC_DEFAULT (RPC_ANEG | (RPC_LED_100 << RPC_LSXA_SHFT) | (RPC_LED_FD << RPC_LSXB_SHFT) | RPC_SPEED | RPC_DPLX) + +/* BANK 1 */ +#define CONFIG 0 +#define CFG_AUI_SELECT 0x100 +#define BASE 2 +#define ADDR0 4 +#define ADDR1 6 +#define ADDR2 8 +#define GENERAL 10 +#define CONTROL 12 +#define CTL_POWERDOWN 0x2000 +#define CTL_LE_ENABLE 0x80 +#define CTL_CR_ENABLE 0x40 +#define CTL_TE_ENABLE 0x0020 +#define CTL_AUTO_RELEASE 0x0800 +#define CTL_EPROM_ACCESS 0x0003 /* high if Eprom is being read */ + +/* BANK 2 */ +#define MMU_CMD 0 +#define MC_BUSY 1 /* only readable bit in the register */ +#define MC_NOP 0 +#define MC_ALLOC 0x20 /* or with number of 256 byte packets */ +#define MC_RESET 0x40 +#define MC_REMOVE 0x60 /* remove the current rx packet */ +#define MC_RELEASE 0x80 /* remove and release the current rx packet */ +#define MC_FREEPKT 0xA0 /* Release packet in PNR register */ +#define MC_ENQUEUE 0xC0 /* Enqueue the packet for transmit */ + +#define PNR_ARR 2 +#define FIFO_PORTS 4 + +#define FP_RXEMPTY 0x8000 +#define FP_TXEMPTY 0x80 + +#define POINTER 6 +#define PTR_READ 0x2000 +#define PTR_RCV 0x8000 +#define PTR_AUTOINC 0x4000 +#define PTR_AUTO_INC 0x0040 + +#define DATA_1 8 +#define DATA_2 10 +#define INTERRUPT 12 + +#define INT_MASK 13 +#define IM_RCV_INT 0x1 +#define IM_TX_INT 0x2 +#define IM_TX_EMPTY_INT 0x4 +#define IM_ALLOC_INT 0x8 +#define IM_RX_OVRN_INT 0x10 +#define IM_EPH_INT 0x20 +#define IM_ERCV_INT 0x40 /* not on SMC9192 */ + +/* BANK 3 */ +#define MULTICAST1 0 +#define MULTICAST2 2 +#define MULTICAST3 4 +#define MULTICAST4 6 +#define MGMT 8 +#define REVISION 10 /* ( hi: chip id low: rev # ) */ + +// Management Interface Register (MII) +#define MII_REG 0x0008 +#define MII_MSK_CRS100 0x4000 // Disables CRS100 detection during tx half dup +#define MII_MDOE 0x0008 // MII Output Enable +#define MII_MCLK 0x0004 // MII Clock, pin MDCLK +#define MII_MDI 0x0002 // MII Input, pin MDI +#define MII_MDO 0x0001 // MII Output, pin MDO + +/* this is NOT on SMC9192 */ +#define ERCV 12 + +/* Note that 9194 and 9196 have the smame chip id, + * the 9196 will have revisions starting at 6 */ +#define CHIP_9190 3 +#define CHIP_9194 4 +#define CHIP_9195 5 +#define CHIP_9196 4 +#define CHIP_91100 7 +#define CHIP_91100FD 8 + +#define REV_9196 6 + +/* + * Transmit status bits + */ +#define TS_SUCCESS 0x0001 +#define TS_LOSTCAR 0x0400 +#define TS_LATCOL 0x0200 +#define TS_16COL 0x0010 + +/* + * Receive status bits + */ +#define RS_ALGNERR 0x8000 +#define RS_BADCRC 0x2000 +#define RS_ODDFRAME 0x1000 +#define RS_TOOLONG 0x0800 +#define RS_TOOSHORT 0x0400 +#define RS_MULTICAST 0x0001 +#define RS_ERRORS (RS_ALGNERR | RS_BADCRC | RS_TOOLONG | RS_TOOSHORT) + +// PHY Register Addresses (LAN91C111 Internal PHY) + +// PHY Control Register +#define PHY_CNTL_REG 0x00 +#define PHY_CNTL_RST 0x8000 // 1=PHY Reset +#define PHY_CNTL_LPBK 0x4000 // 1=PHY Loopback +#define PHY_CNTL_SPEED 0x2000 // 1=100Mbps, 0=10Mpbs +#define PHY_CNTL_ANEG_EN 0x1000 // 1=Enable Auto negotiation +#define PHY_CNTL_PDN 0x0800 // 1=PHY Power Down mode +#define PHY_CNTL_MII_DIS 0x0400 // 1=MII 4 bit interface disabled +#define PHY_CNTL_ANEG_RST 0x0200 // 1=Reset Auto negotiate +#define PHY_CNTL_DPLX 0x0100 // 1=Full Duplex, 0=Half Duplex +#define PHY_CNTL_COLTST 0x0080 // 1= MII Colision Test + +// PHY Status Register +#define PHY_STAT_REG 0x01 +#define PHY_STAT_CAP_T4 0x8000 // 1=100Base-T4 capable +#define PHY_STAT_CAP_TXF 0x4000 // 1=100Base-X full duplex capable +#define PHY_STAT_CAP_TXH 0x2000 // 1=100Base-X half duplex capable +#define PHY_STAT_CAP_TF 0x1000 // 1=10Mbps full duplex capable +#define PHY_STAT_CAP_TH 0x0800 // 1=10Mbps half duplex capable +#define PHY_STAT_CAP_SUPR 0x0040 // 1=recv mgmt frames with not preamble +#define PHY_STAT_ANEG_ACK 0x0020 // 1=ANEG has completed +#define PHY_STAT_REM_FLT 0x0010 // 1=Remote Fault detected +#define PHY_STAT_CAP_ANEG 0x0008 // 1=Auto negotiate capable +#define PHY_STAT_LINK 0x0004 // 1=valid link +#define PHY_STAT_JAB 0x0002 // 1=10Mbps jabber condition +#define PHY_STAT_EXREG 0x0001 // 1=extended registers implemented + +// PHY Identifier Registers +#define PHY_ID1_REG 0x02 // PHY Identifier 1 +#define PHY_ID2_REG 0x03 // PHY Identifier 2 + +// PHY Auto-Negotiation Advertisement Register +#define PHY_AD_REG 0x04 +#define PHY_AD_NP 0x8000 // 1=PHY requests exchange of Next Page +#define PHY_AD_ACK 0x4000 // 1=got link code word from remote +#define PHY_AD_RF 0x2000 // 1=advertise remote fault +#define PHY_AD_T4 0x0200 // 1=PHY is capable of 100Base-T4 +#define PHY_AD_TX_FDX 0x0100 // 1=PHY is capable of 100Base-TX FDPLX +#define PHY_AD_TX_HDX 0x0080 // 1=PHY is capable of 100Base-TX HDPLX +#define PHY_AD_10_FDX 0x0040 // 1=PHY is capable of 10Base-T FDPLX +#define PHY_AD_10_HDX 0x0020 // 1=PHY is capable of 10Base-T HDPLX +#define PHY_AD_CSMA 0x0001 // 1=PHY is capable of 802.3 CMSA + +// PHY Auto-negotiation Remote End Capability Register +#define PHY_RMT_REG 0x05 +// Uses same bit definitions as PHY_AD_REG + +// PHY Configuration Register 1 +#define PHY_CFG1_REG 0x10 +#define PHY_CFG1_LNKDIS 0x8000 // 1=Rx Link Detect Function disabled +#define PHY_CFG1_XMTDIS 0x4000 // 1=TP Transmitter Disabled +#define PHY_CFG1_XMTPDN 0x2000 // 1=TP Transmitter Powered Down +#define PHY_CFG1_BYPSCR 0x0400 // 1=Bypass scrambler/descrambler +#define PHY_CFG1_UNSCDS 0x0200 // 1=Unscramble Idle Reception Disable +#define PHY_CFG1_EQLZR 0x0100 // 1=Rx Equalizer Disabled +#define PHY_CFG1_CABLE 0x0080 // 1=STP(150ohm), 0=UTP(100ohm) +#define PHY_CFG1_RLVL0 0x0040 // 1=Rx Squelch level reduced by 4.5db +#define PHY_CFG1_TLVL_SHIFT 2 // Transmit Output Level Adjust +#define PHY_CFG1_TLVL_MASK 0x003C +#define PHY_CFG1_TRF_MASK 0x0003 // Transmitter Rise/Fall time + + +// PHY Configuration Register 2 +#define PHY_CFG2_REG 0x11 +#define PHY_CFG2_APOLDIS 0x0020 // 1=Auto Polarity Correction disabled +#define PHY_CFG2_JABDIS 0x0010 // 1=Jabber disabled +#define PHY_CFG2_MREG 0x0008 // 1=Multiple register access (MII mgt) +#define PHY_CFG2_INTMDIO 0x0004 // 1=Interrupt signaled with MDIO pulseo + +// PHY Status Output (and Interrupt status) Register +#define PHY_INT_REG 0x12 // Status Output (Interrupt Status) +#define PHY_INT_INT 0x8000 // 1=bits have changed since last read +#define PHY_INT_LNKFAIL 0x4000 // 1=Link Not detected +#define PHY_INT_LOSSSYNC 0x2000 // 1=Descrambler has lost sync +#define PHY_INT_CWRD 0x1000 // 1=Invalid 4B5B code detected on rx +#define PHY_INT_SSD 0x0800 // 1=No Start Of Stream detected on rx +#define PHY_INT_ESD 0x0400 // 1=No End Of Stream detected on rx +#define PHY_INT_RPOL 0x0200 // 1=Reverse Polarity detected +#define PHY_INT_JAB 0x0100 // 1=Jabber detected +#define PHY_INT_SPDDET 0x0080 // 1=100Base-TX mode, 0=10Base-T mode +#define PHY_INT_DPLXDET 0x0040 // 1=Device in Full Duplex + +// PHY Interrupt/Status Mask Register +#define PHY_MASK_REG 0x13 // Interrupt Mask +// Uses the same bit definitions as PHY_INT_REG + + +// PHY Register Addresses (LAN91C111 Internal PHY) + +// PHY Control Register +#define PHY_CNTL_REG 0x00 +#define PHY_CNTL_RST 0x8000 // 1=PHY Reset +#define PHY_CNTL_LPBK 0x4000 // 1=PHY Loopback +#define PHY_CNTL_SPEED 0x2000 // 1=100Mbps, 0=10Mpbs +#define PHY_CNTL_ANEG_EN 0x1000 // 1=Enable Auto negotiation +#define PHY_CNTL_PDN 0x0800 // 1=PHY Power Down mode +#define PHY_CNTL_MII_DIS 0x0400 // 1=MII 4 bit interface disabled +#define PHY_CNTL_ANEG_RST 0x0200 // 1=Reset Auto negotiate +#define PHY_CNTL_DPLX 0x0100 // 1=Full Duplex, 0=Half Duplex +#define PHY_CNTL_COLTST 0x0080 // 1= MII Colision Test + +// PHY Status Register +#define PHY_STAT_REG 0x01 +#define PHY_STAT_CAP_T4 0x8000 // 1=100Base-T4 capable +#define PHY_STAT_CAP_TXF 0x4000 // 1=100Base-X full duplex capable +#define PHY_STAT_CAP_TXH 0x2000 // 1=100Base-X half duplex capable +#define PHY_STAT_CAP_TF 0x1000 // 1=10Mbps full duplex capable +#define PHY_STAT_CAP_TH 0x0800 // 1=10Mbps half duplex capable +#define PHY_STAT_CAP_SUPR 0x0040 // 1=recv mgmt frames with not preamble +#define PHY_STAT_ANEG_ACK 0x0020 // 1=ANEG has completed +#define PHY_STAT_REM_FLT 0x0010 // 1=Remote Fault detected +#define PHY_STAT_CAP_ANEG 0x0008 // 1=Auto negotiate capable +#define PHY_STAT_LINK 0x0004 // 1=valid link +#define PHY_STAT_JAB 0x0002 // 1=10Mbps jabber condition +#define PHY_STAT_EXREG 0x0001 // 1=extended registers implemented + +// PHY Identifier Registers +#define PHY_ID1_REG 0x02 // PHY Identifier 1 +#define PHY_ID2_REG 0x03 // PHY Identifier 2 + +// PHY Auto-Negotiation Advertisement Register +#define PHY_AD_REG 0x04 +#define PHY_AD_NP 0x8000 // 1=PHY requests exchange of Next Page +#define PHY_AD_ACK 0x4000 // 1=got link code word from remote +#define PHY_AD_RF 0x2000 // 1=advertise remote fault +#define PHY_AD_T4 0x0200 // 1=PHY is capable of 100Base-T4 +#define PHY_AD_TX_FDX 0x0100 // 1=PHY is capable of 100Base-TX FDPLX +#define PHY_AD_TX_HDX 0x0080 // 1=PHY is capable of 100Base-TX HDPLX +#define PHY_AD_10_FDX 0x0040 // 1=PHY is capable of 10Base-T FDPLX +#define PHY_AD_10_HDX 0x0020 // 1=PHY is capable of 10Base-T HDPLX +#define PHY_AD_CSMA 0x0001 // 1=PHY is capable of 802.3 CMSA + +// PHY Auto-negotiation Remote End Capability Register +#define PHY_RMT_REG 0x05 +// Uses same bit definitions as PHY_AD_REG + +// PHY Configuration Register 1 +#define PHY_CFG1_REG 0x10 +#define PHY_CFG1_LNKDIS 0x8000 // 1=Rx Link Detect Function disabled +#define PHY_CFG1_XMTDIS 0x4000 // 1=TP Transmitter Disabled +#define PHY_CFG1_XMTPDN 0x2000 // 1=TP Transmitter Powered Down +#define PHY_CFG1_BYPSCR 0x0400 // 1=Bypass scrambler/descrambler +#define PHY_CFG1_UNSCDS 0x0200 // 1=Unscramble Idle Reception Disable +#define PHY_CFG1_EQLZR 0x0100 // 1=Rx Equalizer Disabled +#define PHY_CFG1_CABLE 0x0080 // 1=STP(150ohm), 0=UTP(100ohm) +#define PHY_CFG1_RLVL0 0x0040 // 1=Rx Squelch level reduced by 4.5db +#define PHY_CFG1_TLVL_SHIFT 2 // Transmit Output Level Adjust +#define PHY_CFG1_TLVL_MASK 0x003C +#define PHY_CFG1_TRF_MASK 0x0003 // Transmitter Rise/Fall time + + +// PHY Configuration Register 2 +#define PHY_CFG2_REG 0x11 +#define PHY_CFG2_APOLDIS 0x0020 // 1=Auto Polarity Correction disabled +#define PHY_CFG2_JABDIS 0x0010 // 1=Jabber disabled +#define PHY_CFG2_MREG 0x0008 // 1=Multiple register access (MII mgt) +#define PHY_CFG2_INTMDIO 0x0004 // 1=Interrupt signaled with MDIO pulseo + +// PHY Status Output (and Interrupt status) Register +#define PHY_INT_REG 0x12 // Status Output (Interrupt Status) +#define PHY_INT_INT 0x8000 // 1=bits have changed since last read +#define PHY_INT_LNKFAIL 0x4000 // 1=Link Not detected +#define PHY_INT_LOSSSYNC 0x2000 // 1=Descrambler has lost sync +#define PHY_INT_CWRD 0x1000 // 1=Invalid 4B5B code detected on rx +#define PHY_INT_SSD 0x0800 // 1=No Start Of Stream detected on rx +#define PHY_INT_ESD 0x0400 // 1=No End Of Stream detected on rx +#define PHY_INT_RPOL 0x0200 // 1=Reverse Polarity detected +#define PHY_INT_JAB 0x0100 // 1=Jabber detected +#define PHY_INT_SPDDET 0x0080 // 1=100Base-TX mode, 0=10Base-T mode +#define PHY_INT_DPLXDET 0x0040 // 1=Device in Full Duplex + +// PHY Interrupt/Status Mask Register +#define PHY_MASK_REG 0x13 // Interrupt Mask +// Uses the same bit definitions as PHY_INT_REG + + +/*------------------------------------------------------------------------- + * I define some macros to make it easier to do somewhat common + * or slightly complicated, repeated tasks. + --------------------------------------------------------------------------*/ + +/* select a register bank, 0 to 3 */ + +#define SMC_SELECT_BANK(x, y) { _outw( y, x + BANK_SELECT ); } + +/* define a small delay for the reset */ +#define SMC_DELAY(x) { inw( x + RCR );\ + inw( x + RCR );\ + inw( x + RCR ); } + + +#endif /* _SMC_9000_H_ */ + -- cgit v1.2.3