From ca67b09c015d4af3ae3cce12aa72e60941dbb8b5 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 18:29:52 +0200 Subject: Adding debian version 2.06-13+deb12u1. Signed-off-by: Daniel Baumann --- debian/grub-extras/ntldr-img/grldrstart.S | 5793 +++++++++++++++++++++++++++++ 1 file changed, 5793 insertions(+) create mode 100644 debian/grub-extras/ntldr-img/grldrstart.S (limited to 'debian/grub-extras/ntldr-img/grldrstart.S') diff --git a/debian/grub-extras/ntldr-img/grldrstart.S b/debian/grub-extras/ntldr-img/grldrstart.S new file mode 100644 index 0000000..1751338 --- /dev/null +++ b/debian/grub-extras/ntldr-img/grldrstart.S @@ -0,0 +1,5793 @@ +/* + * grldrstart.S -- Startup code for GRLDR + * Copyright (C) 2004-2007 Tinybit(tinybit@tom.com) + * Copyright (C) 2007 Bean(bean@windrv.net) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +/* + * This program is used to generate the GRLDR file. + * + * Use the following shell command to generate the GRLDR file: + * + * cat grldrstart pre_stage2 > grldr + * + */ + +#ifndef STAGE1_5 +//#include +#else +#error cannot compile with STAGE1_5 +#endif + +#ifdef GRLDR_MBR + .file "mbrstart.S" +#elif defined(GRLDR_INSTALL) + .file "bootlacestart.S" +#else + .file "grldrstart.S" +#endif + +#ifdef GRLDR_INSTALL + //.data +#else + .text + + .globl start, _start + +start: +_start: +#endif + +_start1: + + /* Tell GAS to generate 16-bit real mode instructions */ + + .code16 + + . = _start1 + 0x00 + + /* 1 byte at offset 0x00 will be overwritten for the EBIOS indicator + * later. This is safe because the jmp instruction only get executed + * once. The write happens after the jmp instruction have got + * executed. + * + * The value written would be 0x42 for EBIOS present(LBA) and 0x02 + * for non-present(CHS). + * + */ + + /* No cli, we use stack! BIOS or caller usually sets SS:SP=0000:0400 */ + + jmp 1f /* FAT32/NTFS routine comes to offset 0 */ + + . = _start1 + 0x02 + + .byte 0x80 /* bit0=1: disable GRLDR search on floppy */ + /* bit1=1: disable the boot of the previous MBR with + * invalid partition table */ + /* bit2=1: disable the feature of unconditional + * entrance to the command-line */ + /* bit7=1: disable the boot of the previous MBR prior + to the search for GRLDR */ + + /* GRLDR.MBR uses offset 0x03 to indicate a timer counter. */ + + /* 0xff indicates waiting forever, + * other value specifies the time in seconds to wait */ + + . = _start1 + 0x03 + + .byte 5 + + /* a key press to wait. if AX returned from int16 equals this word, + * the desired action will occur. */ + + . = _start1 + 0x04 + + .word 0x3920 /* the space bar */ + + . = _start1 + 0x06 + + .byte 0xff /* preferred boot drive number, 0xff for no-drive(i.e., drive not defined) */ + .byte 0xff /* preferred partition number, 0xff for whole drive(a floppy that has no partition table) */ + + . = _start1 + 8 + +#if (! defined(GRLDR_MBR)) && (! defined(GRLDR_INSTALL)) + + /* filled in by mkisofs using the -boot-info-table option */ + +#;bi_pvd: .long 0xDEADBEEF /* LBA of primary volume descript */ +#;bi_file: .long 0xDEADBEEF /* LBA of boot file */ +#;bi_length: .long 0xDEADBEEF /* Length of boot file */ +#;bi_csum: .long 0xDEADBEEF /* Checksum of boot file */ +#;bi_reserved: .space (10*4) /* Reserved */ + + . = _start1 + 0x40 + +#else + + /* filled in with BPB in case the drive(typically USB) is treated as floppy by buggy BIOSes */ + + . = _start1 + 0x60 + +#endif /* ! defined(GRLDR_MBR) && (! defined(GRLDR_INSTALL)) */ + +1: + call 1f + +#if (! defined(GRLDR_MBR)) && (! defined(GRLDR_INSTALL)) + + . = _start1 + 0x43 + +#else + + . = _start1 + 0x63 + +#endif /* ! defined(GRLDR_MBR) && (! defined(GRLDR_INSTALL)) */ + +1: + popw %bx /* Instruction Pointer of 1b */ + +#if (! defined(GRLDR_MBR)) && (! defined(GRLDR_INSTALL)) + + subw $(1b - _start1), %bx /* CS:BX=_start1 */ + +#else + + subw $(1b - _start1), %bx /* CS:BX=_start1 */ + +#endif /* ! defined(GRLDR_MBR) && (! defined(GRLDR_INSTALL)) */ + + shrw $4, %bx + movw %cs, %ax + addw %ax, %bx /* BX:0000=_start1 */ + +#if (! defined(GRLDR_MBR)) && (! defined(GRLDR_INSTALL)) + + /* we are booted from BOOT.INI, or whole GRLDR image already loaded */ + + pushw %bx /* BX:0000=_start1 */ + addw $((grldr_signature - _start1 + 4 + STAGE2_SIZE - 4) >> 4), %bx + movw %bx, %ds + + cmpl $0xCE1A02B0, ((STAGE2_SIZE - 4) & 0x0F) + popw %ds /* DS:0000=_start1 */ + je grldr_real_start /* whole image loaded. boot it! */ + + /* bad! we might be loaded by a buggy BIOS with a no-emulation-mode + * bootable CD. The buggy BIOS might load only 1 CD-ROM sector(2048 + * bytes) of our grldr image. So we need this check. + */ + + /* Our cdrom_check code begins at 0x1BE and overlaps the partition + * table. Just in case someone replace it with a partition table and + * use this sector as an MBR, we do this additional test for safety. + */ + + /* We should avoid using opcode 0x00 and 0x80 at cdrom_check. */ + + /* Note that if cdrom_check code is present, then we are booting from + * no-emulation mode cdrom. + */ + + testb $0x7F, cdrom_check - _start1 /* is it 0x00 or 0x80? */ + jz 1f /* yes, cdrom_check not found */ + call cdrom_check /* no, cdrom_check is present */ +1: + /* DS:0000=_start1 */ + + /* Let CS:0000=_start1 */ + pushw %ds + + #;pushw $(1f - _start1) + .byte 0x6A, (1f - _start1) + + lret + . = . - (. - _start1) / 0x80 +1: +#else + /* BX:0000=_start1 */ + + movw %bx, %ds + + /* Let CS:0000=_start1 */ + pushw %bx + + #;pushw $(1f - _start1) + .byte 0x6A, (1f - _start1) + + lret + . = . - (. - _start1) / 0x80 +1: + testb $0x04, 0x02 + jz 1f + + /* set the DUCE indicator */ + xorw %ax, %ax + movw %ax, %es + movw $0x5FC, %di + movl $0x45435544, %eax + stosl +1: +#endif + + /* CS:0000=DS:0000=_start1 */ + + /* we are loaded by BIOS or another boot loader */ + +#define GRLDR_CS 0x2000 /* grldr code segment */ + /* hope this segment never be used by all */ + /* subsequent partition boot records */ +#if 0 + /* for single sector boot record */ +#define MONITOR 0x7e10 +#else + /* for 4-sector NTFS boot record */ +#define MONITOR 0x8410 +#endif + +// cli + pushw $GRLDR_CS + popw %ss + movw $0x9000, %sp /* SS:SP=0x9d000, keep away from EBDA data */ +// sti + + /* Extended BIOS Data Area should not take up space below 0x9d000 */ + + /* + * 0x07c00-0x07dff This sector. Another boot loader load us here + * 0x0d000-0x14dff partition/floppy boot track(bootsector,etc) + * 0x94000-0x9bdff master boot track(MBR,etc,usually 63 sectors) + * 0x9be00-0x9c3ff 3 sectors for temp extended partition entries + * 0x9c400-0x9cfff 6 sectors for stack + */ + +#define FS_BOOT 0xd00 /* segment of partition boot track */ + + xorw %cx, %cx + pushw %cx /* CX=0 */ + movw $0x0080, %dx + pushw %dx + movb $8, %ah /* read drive parameters changes DX,ES,DI */ + stc + int $0x13 + popw %dx + popw %ax /* AX=0 */ + + pushw %ss /* SS=0x9400 */ + popw %es /* ES=0x9400 */ + + jc Error1 + + andb $63, %cl /* AL=sectors per track, CF cleared */ + + stc + jz Error1 + + xchgw %ax, %cx /* this moves CL to AL, and CX=0 */ + movb $0x02, %ah + movw %ax, %bp /* save AX to BP: read 1 track */ + xorw %bx, %bx /* ES already has a known value of 0x9400 */ + incw %cx + pushw %dx + stc + int $0x13 /* read master boot track to ES:0000 */ + popw %dx + jc Error1 + negb %ah /* set CF=1 if non-zero */ +Error1: + pushw %cs /* DS=0 */ + popw %ds /* DS=CS */ + pushfw /* CF=1 on error */ + + /* CS=DS=old segment. ES=SS=new segment. */ + + /* Move the code and error messages from DS:0000 to 9400:0000, do not + * touch the partition table + */ + xorw %si, %si + xorw %di, %di + movw $223, %cx /* 223 words = 446 bytes = 0x1be bytes */ + cld + repz movsw /* SI=DI=0x1be, CX=0 */ + + movw $(grldr_signature - _start1), %bx + + /* if the boot loader has loaded more than one sector, we use them */ + movl $0xAA555247, %eax /* "GR" 0x55 0xAA */ +//#if (! defined(GRLDR_MBR)) && (! defined(GRLDR_INSTALL)) + cmpl %eax, (%bx) /* DS=old segment! */ + jne 1f + + /* The MOVE_HELPER code is in the old segment! */ + + call move_helper /* SI=0x1be, CX=0 */ +1: +//#endif + + /* Jump to new segment! */ +#if 1 + ljmp $GRLDR_CS, $(1f - _start1) +#else + pushw %ss /* 0x9400 */ + + //pushw $(1f - _start1) + .byte 0x6A, (1f - _start1) + + lret + . = . - (. - _start1) / 0x80 +#endif +1: + + /* We are at the new segment. CS=ES=SS=new segment. */ + + /* But DS is still old segment. */ + + pushw %ss + popw %ds + + /* CS=DS=ES=SS=new segment. */ + + //movw $0x01be, %si + + /* check the existence of helper */ + cmpl %eax, (%bx) + +#if (! defined(GRLDR_MBR)) && (! defined(GRLDR_INSTALL)) + + jne Error_or_prev_MBR /* Missing helper */ + +#else + + je 1f + + /* try to load helper from floppy */ + + pushal + + movw 0x18, %ax /* BPB sectors per track at offset 0x18 */ + + cmpw $0x3F, %ax + ja 3f + + cmpb $((pre_stage2_start - _start1) >> 9), %al + jb 3f + + decw %ax /* skip the first sector already loaded */ + + movw $3, %di /* retry 3 times on read failure */ +2: + movb $2, %ah /* BIOS disk read */ + cwd /* DX=0 for floppy head 0 */ + movw $0x200, %bx /* ES:BX immediately follow this sector */ + movw $2, %cx /* skip the first sector already loaded */ + + pushaw + int $0x13 + popaw + + jnc 3f + + pushaw + xorw %ax, %ax + int $0x13 + popaw + + decw %di + jnz 2b +3: + popal + cmpl %eax, (%bx) /* helper loaded? */ + + jne Error_or_prev_MBR /* Missing helper */ + +1: +#endif + + popfw /* CF=1 on error */ + jc try_floppy /* harddisk (hd0) failed, try floppy (fd0) */ +1: + pushw %cs + popw %ds + lodsw + movb %ah, %dh /* head number */ + lodsw + movw %ax, %cx /* sector and cylinder number */ + andb $63, %al + //stc + jz helper_call_c + + /* use BP to calculate the sectors to read within 1 track */ + subw %bp, %ax + decw %ax /* decb %al */ + negb %al /* AL=sectors upto the end of the track */ +7: + movw $3, %di /* retry 3 times on read failure */ +2: + movb $2, %ah + pushw $FS_BOOT + popw %es /* ES=FS_BOOT */ + xorw %bx, %bx + + pushaw + int $0x13 /* read partition boot track to FS_BOOT:0000 */ + popaw + + jnc helper_call + + pushaw + xorw %ax, %ax + int $0x13 + popaw + + decw %di + jnz 2b + +helper_call_c: + + stc + +helper_call: + /* find GRLDR in this partition + * before the call: + * CF=1 : indicates an invalid or corrupt entry + * CF=0 : indicates a valid entry + * + * on return: + * CF=1 : means "below", try next entry + * CF=0,ZF=1 : means "equal", helper did nothing, so we need + * a further try to boot via NT bootsector + * CF=0,ZF=0 : means "above", helper succeeded, boot it now + */ + call helper_start /* change to jmp 6f if helper not present */ + ja filesystem_boot /* helper succeeded, directly boot it */ +6: + +add_sub_si: + + /* extended partition check routine will adjust this to + * + * 0x83, 0xEE, 0x04 for "subw $4, %si" + * + * or + * + * 0x83, 0xC6, 0xFC for "addw $-4, %si" + * + * so that SI keeps the value 0x1fe. + */ + addw $12, %si /* 0x83, 0xC6, 0x0C */ + + . = add_sub_si + 3 + + /* extended partition check routine will adjust the word 0x1fe at + * (add_sub_si + 5). The value 0x1ff or greater indicates there are + * entries need to be treated. The value 0x1fe indicates no entries + * left, and the floppy should be checked. + */ + + cmpw $0x01fe, %si /* 0x81, 0xFE, 0xfe, 0x01 */ + /* All entries checked done? */ + jb 1b /* No, check the next entry */ + ja 5f /* floppy already checked. Fail and hang */ + +try_floppy: + + movw $0x31b2, %si /* a value big enough */ + movb $0x08, %ah /* read drive parameters changes DX,ES,DI */ + cwd /* DL=0 for floppy */ + pushw %dx /* DX=0 */ + int $0x13 + popw %ax /* AX=0 */ + jc 5f /* floppy failure, issue "Error" and hang */ + cwd /* DX=0 */ + xchgw %ax, %cx /* this moves CL to AL, and CX=0 */ + andb $63, %al /* AL=sectors per track */ + jz 5f /* invalid value. floppy failure. hangs */ + //movw $1, %cx + incw %cx + jmp 7b + +5: +Error_or_prev_MBR: + + /* GRLDR not found, print "Error" or launch previous MBR */ + movw $(message_string - _start1), %si +Error2: + call print_message /* CS:SI points to message string */ +3: jmp 3b + +#if (! defined(GRLDR_MBR)) && (! defined(GRLDR_INSTALL)) +filesystem_boot: + /* The partition boot record successfully modified, just boot it */ + + /* + * The boot might fail, but we want to take back the control. + * So we save the registers now. + */ + pushw %ds + pushw %es + pushal + + /* DS=CS=GRLDR_CS, ES=FS_BOOT */ + + /* save GRLDR_CS */ + + movw %es, %bx # save old ES to BX + + cli + lgdt gdt - _start1 + movl %cr0, %eax + orb $1, %al + movl %eax, %cr0 + + movw $8, %si + movw %si, %es + + xorl %esi, %esi + xorl %edi, %edi + movl $(0x9000 / 4), %ecx + + cld + repz movsl + + movw $16, %si + movw %si, %es + + andb $0xfe, %al + movl %eax, %cr0 + + movw %bx, %es # restore ES from BX + + /* move FS_BOOT:0000 to 0:7c00 */ +#if 0 + /* for single sector boot record */ + movw $0x0200, %cx /* move 2 sectors, the old FS_BOOT:0000 will + * keep untouched. */ +#else + /* for 4-sector NTFS boot record */ + movw $0x0400, %cx /* move 4 sectors, the old FS_BOOT:0000 will + * keep untouched. */ +#endif + xorw %si, %si + pushw %si /* SI=0, for the segment of 0000:7c00 */ + movw $0x7c00, %di + pushw %di /* DI=0x7c00, for the offset of 0000:7c00 */ + pushw %es /* ES=FS_BOOT */ + popw %ds /* DS=FS_BOOT */ + pushw %si /* SI=0 */ + popw %es /* ES=0 */ + cld + repz movsw + + movw $MONITOR, %di + movw $(restore_GRLDR_CS - _start1), %si + movw $((gdt_end - restore_GRLDR_CS) / 4), %cx + cld + repz cs movsl /* CS segment override prefix(=0x2E) */ + + pushw %es /* ES=0 */ + popw %ds /* DS=0 */ + sti + lret //ljmp $0, $0x7c00 +#endif + +try_next_partition: + + cli + movw $GRLDR_CS, %ax + movw %ax, %ss + movw $(0x9000-36), %sp + sti + + /* restore the registers and continue */ + popal + popw %es + popw %ds + jmp add_sub_si + + /* prints string CS:SI (modifies AX BX SI) */ +3: + //xorw %bx, %bx /* video page 0 */ + movb $0x0e, %ah /* print char in AL */ + int $0x10 /* via TTY mode */ + +print_message: + + lodsb %cs:(%si), %al /* get token */ + cmpb $0, %al /* end of string? */ + jne 3b + ret + +message_string: + +#if (! defined(GRLDR_MBR)) && (! defined(GRLDR_INSTALL)) + .ascii "\r\nMissing helper.\0" +#else + .ascii "\r\nMissing MBR-helper.\0" +#endif + +#;buggy_bios_string: +#; +#; .ascii "\r\nBuggy BIOS!\0" + + /* Make sure the above code does not occupy the partition table */ + +#if (! defined(GRLDR_MBR)) && (! defined(GRLDR_INSTALL)) + /* offset value here must be less than or equal to 0x1be */ + . = . - ((. - _start1) / 0x1bf) +#else + /* offset value here must be less than or equal to 0x1b8 */ + . = . - ((. - _start1) / 0x1b9) +#endif + + /* The following code may occupy the same area as the partition table */ + +#if (! defined(GRLDR_MBR)) && (! defined(GRLDR_INSTALL)) + + /* we are not booted from MBR. So we can reuse the area of partition + * table for our code. + */ + + . = _start1 + 0x1be + +cdrom_check: + + /* DS points to the sector start, but CS does not. */ + + /* BX segment points to near the end of GRLDR image. */ + + popw %ax /* old return IP */ + + /* set BX as the new safe stack. */ + movw %bx, %ss + movw $0xFFF0, %sp + + pushw %ax /* old return IP */ + + /* check if DL is no-emulation-mode bootable CDROM. */ + pushw %ds + + cmpb $0x80, %dl + jb 1f /* not a valid no-emulation-mode cdrom drive number */ + + cmpw $0xAA55, 0x7FE /* 2048 bytes loaded? */ + jne 1f + +// cmpw $0xAA55, 0x5FE /* 2048 bytes loaded? */ +// jne 1f + + movw $0x0180, %si + movw $0x4B01, %ax + pushw $0x0040 + //.byte 0x6A, 0x40 + popw %ds + pushw %ds + popw %es + movb $0x13, (%si) + int $0x13 + + /* ignore CF */ +#; jc 2f /* not in emulation mode */ + xorl %eax, %eax + xorw %bp, %bp + testb $0x0F, 1(%si) /* boot media type is No Emulation? */ + jnz 2f /* no, it simulates floppy or hard disk. */ + cmpb %dl, 2(%si) /* drive number */ + jnz 2f /* invalid drive */ + + /* OK! it is no-emulation-mode cdrom drive. */ + movl 4(%si), %eax /* LBA of GRLDR */ + incw %bp + +2: + jmp cdrom_helper +1: + popw %ds + ret + + +#endif /* ! defined(GRLDR_MBR) && (! defined(GRLDR_INSTALL)) */ + + . = _start1 + 0x1fe /* boot signature */ + +/* partition entries in the extended partitions will overwrite code here upto + * 0x3fd. + * + * the extended partition entries will occupy a temp area at 0x9be00-0x9c3ff + */ + +#if (defined(GRLDR_MBR)) || (defined(GRLDR_INSTALL)) + .word 0xaa55 +#endif + + . = _start1 + 0x200 + +/* if it is in the Master Boot Track, the second sector can be used to backup + * the previously working MBR, typically, the MS MBR. if the backup copy of + * the MBR cannot boot(because, e.g., it depends on another sector of code + * that does not exist for now), then please do not set the ending signature + * to 0xAA55, that is to say, if the signature is already 0xAA55, you should + * change it to another value(for example, 0x0000). + */ + +#if (! defined(GRLDR_INSTALL)) +#if 0 +print_cl: + pushaw + + movw %cx, %ax + movb $16, %cl + divb %cl # quo=AL, rem=AH + orw $0x3030, %ax + + cmpb $0x39, %ah + jbe 1f + addb $7, %ah +1: + cmpb $0x39, %al + jbe 1f + addb $7, %al +1: + movb %ah, %cl + + xorw %bx, %bx + + movb $0x0e, %ah + int $0x10 + + movb $0x0e, %ah + movb %cl, %al + int $0x10 + + movw $0x0e20, %ax + int $0x10 + + popaw + ret +#else +#if 0 + .word 5, 0x47, 0x52, 0x4c, 0x44, 0x52, 4, 0x24 + .word 0x49, 0x33, 0x30, 0xe000, 0, 0x3000, 0, 0 +#else + .byte 0x90, 0x90 + .byte 0x90, 0x90 + .byte 0x90, 0x90 + .byte 0x90, 0x90 + .byte 0x90, 0x90 + .byte 0x90, 0x90 + .byte 0x90, 0x90 + .byte 0x90, 0x90 + + .byte 0x90, 0x90 + .byte 0x90, 0x90 + .byte 0x90, 0x90 + .byte 0x90, 0x90 + .byte 0x90, 0x90 + .byte 0x90, 0x90 + .byte 0x90, 0x90 + .byte 0x90, 0x90 +#endif + .byte 0x90, 0x90 + .byte 0x90, 0x90 + .byte 0x90, 0x90 + .byte 0x90, 0x90 + .byte 0x90, 0x90 + .byte 0x90, 0x90 + .byte 0x90, 0x90 + .byte 0x90, 0x90 + + .byte 0x90, 0x90 + .byte 0x90, 0x90 + .byte 0x90, 0x90 + .byte 0x90, 0x90 + .byte 0x90, 0x90 + .byte 0x90, 0x90 + .byte 0x90, 0x90 + .byte 0x90, 0x90 + + .byte 0x90, 0x90 + .byte 0x90, 0x90 + .byte 0x90, 0x90 + .byte 0x90, 0x90 + .byte 0x90, 0x90 + .byte 0x90, 0x90 + .byte 0x90, 0x90 + .byte 0x90, 0x90 + + .byte 0x90, 0x90 + .byte 0x90, 0x90 + .byte 0x90, 0x90 +#endif + . = _start1 + 0x256 /* cmdcons comes here */ + +#if 0 + jmp 1f +#else + .byte 0x90, 0x90 +#endif + + . = _start1 + 0x258 + + .byte 0x90, 0x90 + + . = _start1 + 0x25a + + .byte 0x90, 0x90 + .byte 0x90, 0x90 + .byte 0x90, 0x90 + .byte 0x90, 0x90 + .byte 0x90, 0x90 + .byte 0x90, 0x90 + .byte 0x90, 0x90 + .byte 0x90, 0x90 + + . = _start1 + 0x26a +1: + //movw %cs, %ax + //movw %ax, %ds + //jmp single_boot_sector + + /* a value < 0x80 here means we are not booted from no-emulation-mode + * bootable CD. + */ + movb $0x7F, %dl + jmp _start1 + +#endif /* (! defined(GRLDR_INSTALL)) */ + +#if (! defined(GRLDR_MBR)) && (! defined(GRLDR_INSTALL)) +cdrom_helper: + + /* IP and old_DS is on the stack. */ + + /* DS=ES=40h */ + + /* Stack is high and safe. */ + + /* EAX is LBA. if EAX==0, LBA is unknown. */ + + /* check if the first sector is the same as the current one */ + + /* load the first sector onto the sector immediately follows */ +1: + popw %bx /* BX = old_DS = load_segment */ + pushw %bx + movw %bx, %es + addw $0x0080, %bx /* buffer segment */ + call load_cd_sector + + /* compare the two sectors */ + movw $0x200, %cx + movw %bx, %ds + xorw %si, %si + xorw %di, %di + cld + repz cmpsl + je load_the_rest /* 1st sector is ok, continue */ +not_grldr: + testw %bp, %bp + jz 2f + xorw %bp, %bp + xorl %eax, %eax +2: + incl %eax + jnz 1b /* try next */ + +cd_no_grldr: + + popw %ds /* DS=load_segment */ + + # Here we use error message and routine in FAT32 boot sector + # which is also inside the 2048-byte CD sector. + + movw $(msg_BootError_32 - _start1), %si + jmp boot_error_32 + +load_cd_sector: + /* input: EAX LBA + * BX buffer segment(buffer offset=0) + * DS 0x40 (or another safe one) + */ + + movw $0x1A0, %si + + /* disk address packet */ + movl $0x00010010, (%si) /* load 1 sector each time. */ + movw $0, 4(%si) /* buffer offset=0 */ + movw %bx, 6(%si) /* buffer segment */ + movl %eax, 8(%si) /* LBA lo 32 bits */ + movl $0, 12(%si) /* LBA hi 32 bits */ + + pushal + movb $0x42, %ah + int $0x13 + popal + ret + +load_the_rest: + + /* load all sectors (except the first one) */ + + /* EAX = first sector(LBA) of GRLDR */ + + popw %bx /* BX = old_DS = load_segment */ + pushw %bx + movw %bx, %es + /* 6144 = 0x1800 = 3 sectors > 4KB, this is for the additional 4KB-preset-menu at the end of grldr */ + movw $((grldr_signature - _start1 + 4 + STAGE2_SIZE - 1 + 6144) / 2048), %cx /* sectors to load */ +1: + incl %eax /* next sector */ + addw $0x0080, %bx /* buffer segment */ + + call load_cd_sector + + loop 1b + + /* loading is completed. BX=segment of the last sector. */ + + subw $0x0181, %bx /* decw %bx */ + movw %bx, %ds + + /* check the ending signature */ + cmpl $0xCE1A02B0, ((grldr_signature - _start1 + 4 + STAGE2_SIZE - 1) % 2048) + 13 + jne not_grldr +#; je grldr_real_start /* yes. boot it! */ + +#; /* it is not our grldr image, return and use MBR-helper. */ +#; +#;4: +#; //jmp grldr_real_start +#; popw %ds +#; ret + +grldr_real_start: + + #; FAT_12_16 no longer be used. So comment out. + #;je 1f /* jc 1f */ + #;//ZF=0 /* CF cleared, so we are coming from FAT_12_16 */ + #;popw %dx /* discard the cluster number */ + #;popw %dx /* this is our boot_drive/boot_partition */ + #;1: + + #; The partition number for no-emulation-mode bootable CDROM will be + #; set to 0xFF later(in common.c). So comment out. + #;cli + #;movw %cs, %ax + #;cmpw $0x1000, %ax + #;jne 1f + #; + #;/* CS=0x1000, may be booted from ext2 or no-emulation-mode CDROM */ + #; + #;cmpw $0x1000, %di + #;jne 2f + #;cmpw $0x7c00, %bp + #;jne 2f + #;movw %es, %ax + #;cmpw $0x1000, %ax + #;jbe 2f + #;cmpw $0x7c00, %si + #;jbe 2f + #;movl %edx, %eax + #;shrl $16, %eax + #;jnz 2f + #;jecxz 1f // booted from ext2 partition + #;2: + #;// booted from no-emulation-mode bootable CDROM + #;movb $0xff, %dh // partition 0xff means whole drive(for CDROM) + #; #; if needed, 0xfe can be used as an indicator + #; #; here for the bootable CDROM and changed to + #; #; 0xff later. + #;1: + #; + #;//if not booted from CDROM, don't touch the boot partition number(dh) + + cli + xorw %ax, %ax + movw %ax, %ss + movw $0x0400, %sp /* tmp use real-mode IDT as stack */ + movw %cs, %bp /* save CS to BP */ + call 1f +1: + popw %bx /* BX=Instruction Pointer of 1b */ + subw $(1b - _start1), %bx + movw %bx, %cx + shrw $4, %bx + addw %bp, %bx + pushw %bx /* new CS */ + andw $0x000f, %cx + addw $(1f - _start1), %cx + pushw %cx /* new IP */ + lret +1: + pushw %cs + popw %ds + + /* CS=DS=BX, CS:0000 = _start1 */ + + addw $((pre_stage2_start - _start1) >> 4), %bx + + /* BX:0000 = pre_stage2_start */ + + cmpw $0x820, %bx + jb 2f + + movw $((0x8200 - (pre_stage2_start - _start1) - 0x400) >> 4), %cx + + /* Now CS(=DS) >= CX+0x40 */ + + movw %cx, %es + xorw %di, %di + xorw %si, %si + + ///////////////////////////////////////////////////////////// + // + // CS + // DS 0x820 BX + // _start1---------------pre_stage2_start + // CX+0x40---------------0x820 + // CX + // ES + // + ///////////////////////////////////////////////////////////// + + movw $0x200, %cx /* move 2 sectors */ + cld + repz movsw + + pushw %es /* ES:0000 = _start */ + pushw $(1f - _start) + lret /* CS=ES, CS:0000 = _start1 */ +1: + + /* move BX:0000 to 0820:0000 upward since BX >= 0x820 */ + + cld + + movw %bx, %ds + movw $0x820, %bx + movw %bx, %es + + xorw %si, %si + xorw %di, %di + + movw $6, %bx /* 64K pages: 0x20000 - 0x7ffff */ +1: + movw $0x8000, %cx + repz movsw + movw %ds, %ax + addw $0x1000, %ax + movw %ax, %ds + movw %es, %ax + addw $0x1000, %ax + movw %ax, %es + decw %bx + jnz 1b + + jmp 3f +2: + + /* move BX:0000 to 0820:0000 downward since BX < 0x820 */ + + std + + addw $0x7000, %bx + movw %bx, %ds + movw $0x7820, %bx + movw %bx, %es + + movw $0xfffe, %si + movw %si, %di + + movw $8, %bx /* 64K pages: 0x08200 - 0x881ff */ +1: + movw $0x8000, %cx + repz movsw + movw %ds, %ax + subw $0x1000, %ax + movw %ax, %ds + movw %es, %ax + subw $0x1000, %ax + movw %ax, %es + decw %bx + jnz 1b + + cld + +3: + + /* put the config file name */ + xorw %ax, %ax + movw %ax, %es + movw %ax, %ds + + xorl %ebp, %ebp + + movb %dh, 0x820A /* this is the boot partition number */ + + #; clear saved_entryno so that force_cdrom_as_boot_device be cleared + #; later in common.c + + movl %ebp, 0x820C /* EBP=0, clear saved_entryno */ + + movw $0x0010, %cx /* set max length of grub version string */ + movw $0x8212, %di /* version string */ + cld + /* AL is already 0. Locate the end of version string */ + repnz scasb /* find the location of the default config file name */ + + jcxz 1f /* failed, will not use the default config file name */ + + movw $0x4e, %cx /* max length of config file name */ + + movw %cs, %si /* CS:0000 = _start1 */ + shlw $4, %si /* 0000:SI = _start1 */ + + addw $(default_config_file - _start1), %si + + //movw $(default_config_file + 0x8200 - pre_stage2_start), %si + cld + repz movsb /* move file name to the config-file field of stage2 */ +1: + + movw $0x0003, %ax /* set display mode: 80*25 color text */ + int $0x10 + + xorw %bx, %bx + movw $(launch_pre_stage2 - _start1), %si + call print_message /* CS:SI points to message string */ + + xorw %ax, %ax + movw %ax, %ss + movw $0x2000, %sp + + sti + + ljmp $0, $0x8200 + +launch_pre_stage2: + .ascii "\r\n\r\nBooting GRLDR...\r\n" + + .byte 0 /* mark the end of ascii zero string */ + +default_config_file: +//#ifndef PRESET_MENU_STRING + .ascii "/menu.lst" +//#else +// .ascii "[default menu is disabled]" +//#endif + + .byte 0 /* mark the end of ascii zero string */ +#endif /* ! defined(GRLDR_MBR) && (! defined(GRLDR_INSTALL)) */ + + . = _start1 + 0x400 + +#define ALTERNATIVE_KERNEL + + +/* + * The following is based on FreeDOS, modified heavily by Tinybit in Feb, 2004 + * + * Merges LBA and CHS boot sectors to ONE FAT32 boot sector! + * + * Memory layout for GRLDR FAT32 single stage boot process: + * + * ... + * |-------| 1FE0:7E00 + * |BOOTSEC| (GRUB does not use this relocation area) + * |RELOC. | (overwritten by kernel loaded) + * |-------| 1FE0:7C00 + * ... + * |-------| + * |KERNEL | (overwrites bootsec reloc.) + * |LOADED | (holds 1 sector directory buffer before kernel load) + * |-------| 2000:0000 + * ... + * |-------| 0000:7E00 + * |BOOTSEC| GRUB always run inside this sector, + * |ORIGIN | no relocation. + * |-------| 0000:7C00 + * ... + * |-------| 0060:0200 + * | FAT | (only 1 sector buffered) + * |-------| 0060:0000 + * ... + * + */ + +/* +; This is an LBA-enabled FreeDOS FAT32 boot sector (single sector!). +; You can use and copy source code and binaries under the terms of the +; GNU Public License (GPL), version 2 or newer. See www.gnu.org for more. + +; Based on earlier work by FreeDOS kernel hackers, modified heavily by +; Eric Auer and Jon Gentle in 7 / 2003. +; +; Features: Uses LBA and calculates all variables from BPB/EBPB data, +; thus making partition move / resize / image-restore easier. FreeDOS +; can boot from FAT32 partitions which start > 8 GB boundary with this +; boot sector. Disk geometry knowledge is not needed for booting. +; +; Windows uses 2-3 sectors for booting (sector stage, statistics sector, +; filesystem stage). Only using 1 sector for FreeDOS makes multi-booting +; of FreeDOS and Windows on the same filesystem easier. +; +; Requirements: LBA BIOS and 386 or better CPU. Use the older CHS-only +; boot sector if you want FAT32 on really old PCs (problems: you cannot +; boot from > 8 GB boundary, cannot move / resize / ... without applying +; SYS again if you use the CHS-only FAT32 boot sector). +; +; FAT12 / FAT16 hints: Use the older CHS-only boot sector unless you +; have to boot from > 8 GB. The LBA-and-CHS FAT12 / FAT16 boot sector +; needs applying SYS again after move / resize / ... a variant of that +; boot sector without CHS support but with better move / resize / ... +; support would be good for use on LBA harddisks. + + +; Memory layout for the FreeDOS FAT32 single stage boot process: + +; ... +; |-------| 1FE0:7E00 +; |BOOTSEC| +; |RELOC. | +; |-------| 1FE0:7C00 +; ... +; |-------| 2000:0200 +; | FAT | (only 1 sector buffered) +; |-------| 2000:0000 +; ... +; |-------| 0000:7E00 +; |BOOTSEC| overwritten by the kernel, so the +; |ORIGIN | bootsector relocates itself up... +; |-------| 0000:7C00 +; ... +; |-------| +; |KERNEL | maximum size 134k (overwrites bootsec origin) +; |LOADED | (holds 1 sector directory buffer before kernel load) +; |-------| 0060:0000 +; ... +*/ + +#define BOOTGRUB /* undef this if compiled for loading FreeDOS */ +//#undef BOOTGRUB + +#ifdef BOOTGRUB +#define LOADSEG 0x2000 +#define FATSEG 0x0060 +#else +#define LOADSEG 0x0060 +#define FATSEG 0x2000 +#endif + +Entry_32: + jmp 1f + + . = Entry_32 + 0x02 + + /* The default mode is CHS. This is for maximum compatiblity with + * small-sized disks, e.g., floppies. + * + * Valid values are 0x90 for CHS mode, or 0x0e for LBA mode. + * + * If the BIOS int13 supports LBA, this byte can be safely set to 0x0e. + * + * Some USB BIOSes might have bugs when using CHS mode, so the format + * program should set this byte to 0x0e. It seems that (generally) all + * USB BIOSes have LBA support. + * + * If the format program does not know whether the BIOS has LBA + * support, it may operate this way: + * + * if (partition_start + total_sectors_in_partition) exceeds the CHS + * addressing ability(especially when it is greater than 1024*256*63), + * the caller should set this byte to 0x0e, otherwise, set to 0x90. + */ + + .byte 0x90 /* for CHS. Another possible value is 0x0e for LBA */ + + + . = Entry_32 + 0x03 + +#ifdef BOOTGRUB + .ascii "GRLDR " /* OEM name string (of OS which formatted the disk). */ +#endif + + . = Entry_32 + 0x0b + + .word 0x200 /* bytes per sector. Must be 512 */ + + . = Entry_32 + 0x0d + + /* Sectors per cluster. Valid values are 1, 2, 4, 8, 16, 32, 64 and 128. + * But a cluster size larger than 32K should not occur. + */ + + .byte 1 /* sectors per cluster */ + + . = Entry_32 + 0x0e + + /* Reserved sectors(number of sectors before the first FAT, + * including the boot sector), usually 1. + */ + + .word 1 /* reserved sectors */ + + . = Entry_32 + 0x10 + + /* Number of FATs(nearly always 2). */ + + .byte 2 /* number of FATs */ + + . = Entry_32 + 0x11 + + /* (Maximum number of root directory entries)Must be 0. */ + + .word 0 /* Max dir entries for FAT12/FAT16 */ + + . = Entry_32 + 0x13 + + /* (Total number of sectors for small disks only)Must be 0. */ + + .word 0 /* total sectors for FAT12/FAT16 */ + + . = Entry_32 + 0x15 + + /* Media descriptor byte, pretty meaningless now. */ + + .byte 0xf8 /* media descriptor */ + + . = Entry_32 + 0x16 + + /* (Sectors per FAT)Must be 0. */ + + .word 0 /* sectors per FAT for FAT12/FAT16 */ + + . = Entry_32 + 0x18 + + .word 18 /* sectors per track */ + + . = Entry_32 + 0x1a + + .word 2 /* number of heads */ + + . = Entry_32 + 0x1c + + /* Number of hidden sectors (those preceding the boot sector). + * Also referred to as the starting sector of the partition. + * For floppies, it should be 0. + */ + + .long 0 /* hidden sectors */ + + . = Entry_32 + 0x20 + + /* Total number of sectors in the filesystem. */ + + .long 0 /* total sectors for FAT32 */ + + . = Entry_32 + 0x24 + + /* FAT32 sectors per FAT. */ + + .long 0 + + . = Entry_32 + 0x28 + + /* If bit 7 is clear then all FATs are updated, otherwise bits 0-3 + * give the current active FAT, all other bits are reserved. + * This word is not used by grldr boot code. + */ + + .word 0 + + . = Entry_32 + 0x2a + + /* High byte is major revision number, low byte is minor revision + * number, currently both are 0. + * This word is not used by grldr boot code. + */ + + .word 0 + + . = Entry_32 + 0x2c + + /* Root directory starting cluster. */ + + .long 0 + + . = Entry_32 + 0x30 + + /* File system information sector number. + * This word is not used by grldr boot code. + */ + + .word 0 + + . = Entry_32 + 0x32 + + /* If non-zero this gives the sector which holds a copy of the + * boot record, usually 6. + * This word is not used by grldr boot code. + */ + + .word 6 + + . = Entry_32 + 0x34 + + /* Reserved, 12 bytes, set to 0. */ + + .long 0 + .long 0 + .long 0 + + . = Entry_32 + 0x40 + + /* drive number of the boot device. + * This byte is ignored for read. The program will write DL onto + * this byte. The caller should set drive number in DL. + * We assume all BIOSes pass correct drive number in DL. + * That is to say, buggy BIOSes are not supported!! + */ + + .byte 0 + + . = Entry_32 + 0x41 + + /* partition number of this filesystem in the boot drive. + * This byte is ignored for read. The boot code will write partition + * number onto this byte. See Entry + 0x5d below. + */ + + .byte 0 + + . = Entry_32 + 0x42 + + /* Signature (must be 28h or 29h to be recognised by NT). */ + + .byte 0x29 /* extended boot signature for FAT12/FAT16 */ + + . = Entry_32 + 0x43 + + .long 0x0AC4AF63 /* volume serial number */ + + . = Entry_32 + 0x47 + + .ascii "NO NAME " /* volume label, 11 bytes. */ + + . = Entry_32 + 0x52 + + .ascii "FAT32 " /* filesystem ID, 8 bytes. */ + +/* +; bp is initialized to 7c00h +; %define bsOemName bp+0x03 ; OEM label (8) +%define bsBytesPerSec bp+0x0b ; bytes/sector (dw) +%define bsSecPerClust bp+0x0d ; sectors/allocation unit (db) +%define bsResSectors bp+0x0e ; # reserved sectors (dw) +%define bsFATs bp+0x10 ; # of fats (db) +; %define bsRootDirEnts bp+0x11 ; # of root dir entries (dw, 0 for FAT32) + ; (FAT32 has root dir in a cluster chain) +; %define bsSectors bp+0x13 ; # sectors total in image (dw, 0 for FAT32) + ; (if 0 use nSectorHuge even if FAT16) +; %define bsMedia bp+0x15 ; media descriptor: fd=2side9sec, etc... (db) +; %define sectPerFat bp+0x16 ; # sectors in a fat (dw, 0 for FAT32) + ; (FAT32 always uses xsectPerFat) +%define sectPerTrack bp+0x18 ; # sectors/track +; %define nHeads bp+0x1a ; # heads (dw) +%define nHidden bp+0x1c ; # hidden sectors (dd) +; %define nSectorHuge bp+0x20 ; # sectors if > 65536 (dd) +%define xsectPerFat bp+0x24 ; Sectors/Fat (dd) + ; +0x28 dw flags (for fat mirroring) + ; +0x2a dw filesystem version (usually 0) +%define xrootClst bp+0x2c ; Starting cluster of root directory (dd) + ; +0x30 dw -1 or sector number of fs.-info sector + ; +0x32 dw -1 or sector number of boot sector backup + ; (+0x34 .. +0x3f reserved) +%define drive bp+0x40 ; Drive number + bp+0x41 ; partition number for GRLDR + +%define fat_sector bp+0x44 ; last accessed FAT sector (dd) + ; (overwriting unused bytes) +%define fat_start bp+0x48 ; first FAT sector (dd) + ; (overwriting unused bytes) +%define data_start bp+0x4c ; first data sector (dd) + ; (overwriting unused bytes) + +*/ + /* not used: [0x42] = byte 0x29 (ext boot param flag) + * [0x43] = dword serial + * [0x47] = label (padded with 00, 11 bytes) + * [0x52] = "FAT32",32,32,32 (not used by Windows) + * ([0x5a] is where FreeDOS parts start) + */ + + . = Entry_32 + 0x5a +1: + cli + cld + +#ifdef BOOTGRUB + + . = Entry_32 + 0x5c + + /* the byte at offset 0x5d stores the real partition number for read. + * the format program or the caller should set it to a correct value. + * For floppies, it should be 0xff, which stands for whole drive. + */ + + movb $0xff, %dh /* boot partition number */ + + cmpb $0xff, %dh /* is floppy? */ + jne 1f + movb $0, %dl /* yes, let drive number = 0 */ +1: +#endif + + xorw %ax, %ax + movw %ax, %ds + movw $0x7c00, %bp + +#ifdef BOOTGRUB + movw %ax, %es +#else + movw $0x1fe0, %ax + movw %ax, %es + movw %bp, %si /* move from 0000:7c00 */ + movw %bp, %di /* move to 1fe0:7c00 */ + movw $0x0100, %cx /* one sector to move */ + repz movsw + ljmp $0x1fe0, $(1f - Entry_32 + 0x7c00) +1: + movw %ax, %ds +#endif + movw %ax, %ss /* stack and BP-relative moves up, too */ + leaw -0x20(%bp), %sp + sti + movw %dx, 0x40(%bp) /* BIOS passes drive number in DL */ + + movb $0x41, %ah + movw $0x55AA, %bx + int $0x13 + jc 1f /* No EBIOS */ + cmpw $0xAA55, %bx + jne 1f /* No EBIOS */ + testb $1, %cl + jz 1f /* No EBIOS */ + /* EBIOS supported */ + movb $0x42, (ebios_32 - 1 - Entry_32 + 0x7c00) +1: + +/* figure out where FAT and DATA area starts + * (modifies EAX EDX, sets fat_start and data_start variables) + */ + xorl %eax, %eax + movl %eax, 0x44(%bp) /* init buffer status */ + + /* first, find fat_start */ + movw 0x0e(%bp), %ax /* reserved sectors */ + addl 0x1c(%bp), %eax /* hidden sectors */ + movl %eax, 0x48(%bp) /* first FAT sector */ + movl %eax, 0x4c(%bp) /* first data sector, initial value */ + + /* next, find data_start */ + movl 0x10(%bp), %eax /* number of fats, no movzbl needed: the + 2 words after 0x10(%bp) are 0 for fat32 */ + mull 0x24(%bp) /* sectors per fat (EDX=0) */ + addl %eax, 0x4c(%bp) /* first DATA sector */ + +/* Searches for the file in the root directory. + * Returns: EAX = first cluster of file + */ + + movl 0x2c(%bp), %eax /* root dir cluster */ + +1: + pushl %eax /* save cluster */ + call cluster_to_lba_32 + /* EDX is sectors per cluster, EAX is sector number */ + movw $(msg_BootError_32 - Entry_32 + 0x7c00), %si + jc boot_error_32 /* EOC encountered */ + +2: + lesw (loadseg_off_32 - Entry_32)(%bp), %bx /* load to loadseg:0 */ + call readDisk_32 + + xorw %di, %di + + /* Search for kernel file name, and find start cluster */ +3: + movw $11, %cx + movw $(filename_32 - Entry_32 + 0x7c00), %si + repz cmpsb + jz 1f /* note that di now is at dirent+11 */ + + addw $0x20, %di + andw $-0x20, %di /* 0xffe0 */ + cmp 0x0b(%bp), %di /* bytes per sector */ + jnz 3b /* next directory entry */ + + decw %dx /* initially DX holds sectors per cluster */ + jnz 2b /* loop over sectors in cluster */ + + popl %eax /* restore current cluster */ + call next_cluster_32 + jmp 1b /* read next cluster */ + +#ifndef ALTERNATIVE_KERNEL +loadseg_off_32: + .word 0 + .word LOADSEG +#endif + +1: + /* kernel directory entry is found */ + pushw %es:(0x14-11)(%di) /* get cluster number HI */ + pushw %es:(0x1a-11)(%di) /* get cluster number LO */ + popl %eax /* convert to 32bit */ + + xorw %bx, %bx /* read kernel at ES:BX=LOADSEG:0 */ + +/* read kernel */ + +2: + pushl %eax + call cluster_to_lba_32 + /* EDX is sectors per cluster, EAX is sector number */ + jnc 1f + + /* EOC encountered - done */ +#ifdef BOOTGRUB + movw 0x40(%bp), %dx /* boot_drive and boot_partition */ +#else + movb 0x40(%bp), %bl /* FreeDOS kernel uses BL, not DL, for drive */ +#endif + ljmp *(loadseg_off_32 - Entry_32)(%bp) + +1: + call readDisk_32 + decw %dx /* initially DX holds sectors per cluster */ + jnz 1b /* loop over sectors in cluster */ + + popl %eax + call next_cluster_32 + jmp 2b + +/* given a cluster number, find the number of the next cluster in + * the FAT chain. Needs fat_start. + * input: EAX - cluster + * EDX = 0 + * output: EAX - next cluster + * EDX = undefined + */ + +next_cluster_32: + pushw %es + /* pushw %di */ + pushw %bx /* hi word of EBX never used */ + +#if 1 + /* xorl %edx, %edx */ + shll $2, %eax /* 32bit FAT */ + movzwl 0x0b(%bp), %ebx /* bytes per sector */ + divl %ebx /* residue is in EDX */ + /* movw %dx, %di */ +#else + shll $2, %eax /* 32bit FAT */ + ;xchgw %ax, %di /* movw %ax, %di */ + movw %ax, %di + ;shlw $2, %di /* 32bit FAT */ + + pushw %cx + movw 0x0b(%bp), %bx /* bytes per sector */ + bsfw %bx, %cx + ;decw %cx + ;decw %cx + decw %bx + andw %bx, %di /* mask to sector size */ + shrl %cl, %eax + popw %cx +#endif + addl 0x48(%bp), %eax /* add the first FAT sector number. + EAX is absolute sector number now */ + movw $FATSEG, %bx + movw %bx, %es + xorw %bx, %bx + + cmpl 0x44(%bp), %eax /* is it the last accessed and already buffered + FAT sector? */ + jz 1f + movl %eax, 0x44(%bp) /* mark sector EAX as buffered */ + call readDisk_32 /* read sector EAX to buffer */ +1: +#if 1 + //.byte 0x67, 0x26, 0x80, 0x62, 0x03, 0x0f + addr32 andb $0x0f, %es:3(%edx) /* mask out top 4 bits */ + + //.byte 0x67, 0x66, 0x26, 0x8b, 0x02 + addr32 movl %es:(%edx), %eax /* read next cluster number */ +#else + andb $0x0f, %es:3(%di) /* mask out top 4 bits */ + movl %es:(%di), %eax /* read next cluster number */ +#endif + popw %bx + /* popw %di */ + popw %es + ret + +/* Convert cluster number to the absolute sector number + * ... or return carry if EndOfChain! Needs data_start. + * input: EAX - target cluster + * output: EAX - absolute sector + * EDX - [bsSectPerClust] (byte) + * carry clear + * (if carry set, EAX/EDX unchanged, end of chain) + */ + +cluster_to_lba_32: + cmpl $0x0ffffff8, %eax /* check End Of Chain */ + cmc + jb 1f /* carry is stored if EOC */ + + /* sector = (cluster-2) * clustersize + data_start */ + decl %eax + decl %eax + + movzbl 0x0d(%bp), %edx /* sectors per cluster */ + pushw %dx /* only DX would change */ + mull %edx /* EDX = 0 */ + popw %dx + addl 0x4c(%bp), %eax /* data_start */ + /* here, carry is cleared (unless parameters are wrong) */ +1: + ret + +/* Read a sector from disk, using LBA or CHS + * input: EAX - 32-bit DOS sector number + * ES:BX - destination buffer + * (will be filled with 1 sector of data) + * output: ES:BX points one byte after the last byte read. + * EAX - next sector + */ + +readDisk_32: + pushal + xorl %edx, %edx /* EDX:EAX = LBA */ + pushl %edx /* hi 32bit of sector number */ + pushl %eax /* lo 32bit of sector number */ + pushw %es /* buffer segment */ + pushw %bx /* buffer offset */ + pushw $1 /* 1 sector to read */ + pushw $16 /* size of this parameter block */ + + xorl %ecx, %ecx + pushl 0x18(%bp) /* lo:sectors per track, hi:number of heads */ + popw %cx /* ECX = sectors per track */ + divl %ecx /* residue is in EDX */ + /* quotient is in EAX */ + incw %dx /* sector number in DL */ + popw %cx /* ECX = number of heads */ + pushw %dx /* push sector number into stack */ + xorw %dx, %dx /* EDX:EAX = cylinder * TotalHeads + head */ + divl %ecx /* residue is in EDX, head number */ + /* quotient is in EAX, cylinder number */ + xchgb %dl, %dh /* head number should be in DH */ + /* DL = 0 */ + popw %cx /* pop sector number from stack */ + xchgb %al, %ch /* lo 8bit cylinder should be in CH */ + /* AL = 0 */ + shlb $6, %ah /* hi 2bit cylinder ... */ + orb %ah, %cl /* ... should be in CL */ + + movw $0x201, %ax /* read 1 sector */ +ebios_32: /* ebios_32 - 1 points to 0x02 that can be changed to 0x42 */ + +// cmpb $0x0e, 2(%bp) /* force LBA? */ +// jnz 1f /* no, continue */ +// movb $0x42, %ah /* yes, use extended disk read */ +//1: + movw %sp, %si /* DS:SI points to disk address packet */ + movb 0x40(%bp), %dl /* hard disk drive number */ + int $0x13 + popaw /* remove parameter block from stack */ + popal + jc disk_error_32 /* disk read error, jc 1f if caller handles */ + incl %eax /* next sector */ + addw 0x0b(%bp), %bx /* bytes per sector */ + jnc 1f /* 64K bound check */ + pushw %dx + movw %es, %dx + addb $0x10, %dh /* add 1000h to ES */ + /* here, carry is cleared */ + movw %dx, %es + popw %dx +1: + /* carry stored on disk read error */ + ret + + . = . - (. - readDisk_32)/91 + +msg_DiskReadError_32: + + .ascii "disk error\0" + +msg_BootError_32: + + .ascii "No " + +filename_32: + +#ifdef BOOTGRUB2 + .ascii "G2LDR \0" +#elif defined (BOOTGRUB) + .ascii "GRLDR \0" +#else + .ascii "KERNEL SYS\0" +#endif + +#ifdef ALTERNATIVE_KERNEL +filename_end_32: + + . = Entry_32 + 0x1e8 + +loadseg_off_32: + .word 0 + .word LOADSEG + + . = Entry_32 + 0x1ec + +boot_image_ofs_32: + + .word (filename_32 - Entry_32)+(filename_end_32 - filename_32 - 1)*2048 +#endif + + . = Entry_32 + 0x1ee + +disk_error_32: + + movw $(msg_DiskReadError_32 - Entry_32 + 0x7c00), %si + +boot_error_32: + +/* prints string DS:SI (modifies AX BX SI) */ + +//print_32: +1: + lodsb (%si), %al /* get token */ + //xorw %bx, %bx /* video page 0 */ + movb $0x0e, %ah /* print it */ + int $0x10 /* via TTY mode */ + cmpb $0, %al /* end of string? */ + jne 1b /* until done */ + + /* The caller will change this to + * ljmp $0x9400, $(try_next_partition - _start1) + */ + +1: jmp 1b + + . = Entry_32 + 0x1fc + + .word 0, 0xAA55 /* Win9x uses all 4 bytes as magic value here */ + + . = Entry_32 + 0x200 + + . = _start1 + 0x600 + + //.arch i8086, nojumps + .arch i186, nojumps +/* + * The following is based on FreeDOS, modified heavily by Tinybit in Feb, 2004 + * + * Merges FAT12 and FAT16 boot sectors to ONE FAT boot sector! + * + * Memory layout for GRLDR FAT single stage boot process: + * + * +--------+ + * | | + * |GRLDR | also used as max 128k FAT buffer + * |LOADED | before GRLDR loading starts + * |--------| 2000:0000 + * | | + * |--------| 0000:7E00 + * |BOOTSECT| + * |ORIGIN | + * |--------| 0000:7C00 + * | | + * |--------| 0000:3000 + * |CLUSTER | + * |LIST | + * |--------| 0000:2000 + * | | + * +--------+ + */ + +/* +; +; File: +; boot.asm +; Description: +; DOS-C boot +; +; Copyright (c) 1997; +; Svante Frey +; All Rights Reserved +; +; This file is part of DOS-C. +; +; DOS-C is free software; you can redistribute it and/or +; modify it under the terms of the GNU General Public License +; as published by the Free Software Foundation; either version +; 2, or (at your option) any later version. +; +; DOS-C is distributed in the hope that it will be useful, but +; WITHOUT ANY WARRANTY; without even the implied warranty of +; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See +; the GNU General Public License for more details. +; +; You should have received a copy of the GNU General Public +; License along with DOS-C; see the file COPYING. If not, +; write to the Free Software Foundation, 675 Mass Ave, +; Cambridge, MA 02139, USA. +; +; +; +--------+ 1FE0:7E00 +; |BOOT SEC| +; |RELOCATE| +; |--------| 1FE0:7C00 +; | | +; |--------| 1FE0:3000 +; | CLUSTER| +; | LIST | +; |--------| 1FE0:2000 +; | | +; |--------| 0000:7E00 +; |BOOT SEC| overwritten by max 128k FAT buffer +; |ORIGIN | and later by max 134k loaded kernel +; |--------| 0000:7C00 +; | | +; |--------| +; |KERNEL | also used as max 128k FAT buffer +; |LOADED | before kernel loading starts +; |--------| 0060:0000 +; | | +; +--------+ +*/ + +#ifdef BOOTGRUB +#define LOADSEG_12_16 0x2000 +#define FATBUF 0x2000 /* offset of temp buffer for FAT chain */ +#else +#define LOADSEG_12_16 0x0060 +#define FATBUF 0x2000 /* offset of temp buffer for FAT chain */ +#endif + +Entry_12_16: + jmp 1f + + . = Entry_12_16 + 0x02 + + /* The default mode is CHS. This is for maximum compatiblity with + * small-sized disks, e.g., floppies. + * + * Valid values are 0x90 for CHS mode, or 0x0e for LBA mode. + * + * If the BIOS int13 supports LBA, this byte can be safely set to 0x0e. + * + * Some USB BIOSes might have bugs when using CHS mode, so the format + * program should set this byte to 0x0e. It seems that (generally) all + * USB BIOSes have LBA support. + * + * If the format program does not know whether the BIOS has LBA + * support, it may operate this way: + * + * if (partition_start + total_sectors_in_partition) exceeds the CHS + * addressing ability(especially when it is greater than 1024*256*63), + * the caller should set this byte to 0x0e, otherwise, set to 0x90. + */ + + .byte 0x90 /* for CHS. Another possible value is 0x0e for LBA */ + + + . = Entry_12_16 + 0x03 + +#ifdef BOOTGRUB + .ascii "GRLDR " +#endif + + . = Entry_12_16 + 0x0b + + .word 0x200 /* bytes per sector */ + + . = Entry_12_16 + 0x0d + + .byte 1 /* sectors per cluster */ + + . = Entry_12_16 + 0x0e + + .word 1 /* reserved sectors */ + + . = Entry_12_16 + 0x10 + + .byte 2 /* number of FATs */ + + . = Entry_12_16 + 0x11 + + .word 224 /* Max dir entries */ + + . = Entry_12_16 + 0x13 + + .word 2880 /* total sectors in the filesystem */ + + . = Entry_12_16 + 0x15 + + .byte 0xf0 /* media descriptor */ + + . = Entry_12_16 + 0x16 + + .word 9 /* sectors per FAT */ + + . = Entry_12_16 + 0x18 + + .word 18 /* sectors per track */ + + . = Entry_12_16 + 0x1a + + .word 2 /* number of heads */ + + . = Entry_12_16 + 0x1c + + .long 0 /* hidden sectors */ + + . = Entry_12_16 + 0x20 + + .long 0 /* total sectors for large partitions */ + + . = Entry_12_16 + 0x24 + + /* drive number of the boot device. + * This byte is ignored for read. The program will write DL onto + * this byte. The caller should set drive number in DL. + * We assume all BIOSes pass correct drive number in DL. + * That is to say, buggy BIOSes are not supported!! + */ + + .byte 0 + + . = Entry_12_16 + 0x25 + + /* partition number of this filesystem in the boot drive. + * This byte is ignored for read. The boot code will write partition + * number onto this byte. See Entry_12_16 + 0x41 below. + */ + + .byte 0 + + . = Entry_12_16 + 0x26 + + .byte 0x29 /* extended boot signature */ + + . = Entry_12_16 + 0x27 + + .long 0x0AC4AF63 /* volume serial number */ + + . = Entry_12_16 + 0x2b + + .ascii "NO NAME " /* volume label */ + + . = Entry_12_16 + 0x36 + + .ascii "FAT12 " /* filesystem ID */ + +/* +; bp is initialized to 7c00h +%define bsOemName bp+0x03 ; OEM label +%define bsBytesPerSec bp+0x0b ; bytes/sector +%define bsSecPerClust bp+0x0d ; sectors/allocation unit +%define bsResSectors bp+0x0e ; # reserved sectors +%define bsFATs bp+0x10 ; # of fats +%define bsRootDirEnts bp+0x11 ; # of root dir entries +%define bsSectors bp+0x13 ; # sectors total in image +%define bsMedia bp+0x15 ; media descrip: fd=2side9sec, etc... +%define sectPerFat bp+0x16 ; # sectors in a fat +%define sectPerTrack bp+0x18 ; # sectors/track +%define nHeads bp+0x1a ; # heads +%define nHidden bp+0x1c ; # hidden sectors +%define nSectorHuge bp+0x20 ; # sectors if > 65536 +%define drive bp+0x24 ; drive number + bp+0x25 ; partition number for GRLDR +%define extBoot bp+0x26 ; extended boot signature +%define volid bp+0x27 +%define vollabel bp+0x2b +%define filesys bp+0x36 + +%define RootDirSecs bp+0x26 ; # of sectors root dir uses + ; (overwriting unused bytes) +%define fat_start bp+0x28 ; first FAT sector + ; (overwriting unused bytes) +%define root_dir_start bp+0x2c ; first root directory sector + ; (overwriting unused bytes) +%define data_start bp+0x30 ; first data sector + ; (overwriting unused bytes) +%define data_clusters bp+0x34 ; # of clusters in data area + ; (overwriting unused bytes) + bp+0x36 ; bytes per FAT( > 0x1800 means FAT16) + ; (overwriting unused bytes) +*/ + /* not used: [0x26] = byte 0x29 (ext boot param flag) + * [0x27] = dword serial + * [0x2b] = label (padded with 00, 11 bytes) + * [0x36] = "FAT12" or "FAT16",32,32,32 (not used by Windows) + * ([0x3e] is where FreeDOS parts start) + */ + + . = Entry_12_16 + 0x3e +1: + cli + cld + +#ifdef BOOTGRUB + + . = Entry_12_16 + 0x40 + + /* the byte at offset 0x41 stores the real partition number for read. + * the format program or the caller should set it to a correct value. + * For floppies, it should be 0xff, which stands for whole drive. + */ + + movb $0xff, %dh /* boot partition number */ + + cmpb $0xff, %dh /* is floppy? */ + jne 1f + movb $0, %dl /* yes, let drive number = 0 */ +1: +#endif + + xorw %ax, %ax + movw %ax, %ds + movw $0x7c00, %bp + +#ifdef BOOTGRUB + movw %ax, %es + movw %ax, %ss /* stack and BP-relative moves up, too */ + leaw -0x20(%bp), %sp + sti + movw %dx, 0x24(%bp) /* BIOS passes drive number in DL */ + /* AX=0 */ +// xchgw %ax, %dx /* let DX = 0 */ +// xorw %cx, %cx /* CX = 0 */ +#else + movw %bp, %si /* move from 0000:7c00 */ + movw %bp, %di /* move to 1fe0:7c00 */ + movb %dl, 0x24(%si) /* BIOS passes drive number in DL */ +// xchgw %ax, %dx /* let DX = 0 */ + movw $0x1fe0, %ax + movw %ax, %es + movw $0x0100, %cx /* one sector to move */ + repz movsw + /* CX = 0 */ + ljmp $0x1fe0, $(1f - Entry_12_16 + 0x7c00) +1: + movw %ax, %ds + movw %ax, %ss /* stack and BP-relative moves up, too */ + leaw -0x20(%bp), %sp + sti + /* AX=0x1fe0 */ +#endif + + movb $0x41, %ah + movw $0x55AA, %bx + int $0x13 + jc 1f /* No EBIOS */ + cmpw $0xAA55, %bx + jne 1f /* No EBIOS */ + testb $1, %cl + jz 1f /* No EBIOS */ + /* EBIOS supported */ + movb $0x42, (ebios_12_16 - 1 - Entry_12_16 + 0x7c00) +1: +// xorw %cx, %cx + xorw %ax, %ax + + /* GET DRIVE PARMS: Calculate start of some disk areas */ + + movw 0x1c(%bp), %si /* number of hidden sectors(lo) */ + movw 0x1e(%bp), %di /* number of hidden sectors(hi) */ + addw 0x0e(%bp), %si /* number of reserved sectors */ + adcw %ax, %di /* DI:SI = first FAT sector */ + /* AX = 0 */ + + movw %si, 0x28(%bp) /* FAT start sector(lo) */ + movw %di, 0x2a(%bp) /* FAT start sector(hi) */ + + //xchgw %ax, %dx /* let AX = 0 */ + movb 0x10(%bp), %al /* number of FATs */ + /* cbw */ + mulw 0x16(%bp) /* sectors per FAT */ + /* DX:AX = total number of FAT sectors */ + /* DX = 0 since no too many FAT sectors */ + addw %ax, %si + adcw %dx, %di /* DI:SI = root directory start sector */ + movw %si, 0x2c(%bp) /* root directory starting sector(lo) */ + movw %di, 0x2e(%bp) /* root directory starting sector(hi) */ + + /* Calculate how many sectors the root directory occupies */ + + movw 0x0b(%bp), %bx /* bytes per sector */ + movb $5, %cl /* divide BX by 32 */ + shrw %cl, %bx /* BX = directory entries per sector */ + + movw 0x11(%bp), %ax /* max number of root dir entries */ + /* xorw %dx, %dx */ /* assuming DX = 0 */ + divw %bx /* AX = sectors per root directory */ + /* DX = 0 since normally no residue */ + + movw %ax, 0x26(%bp) /* number of sectors the root dir occupies */ + + addw %ax, %si /* DI:SI = first data sector */ + adcw %dx, %di /* assuming DX = 0 */ + + movw %si, 0x30(%bp) /* data starting sector(lo) */ + movw %di, 0x32(%bp) /* data starting sector(hi) */ +#ifdef USE_TOTAL_CLUSTERS + movw 0x13(%bp), %cx /* total sectors(small) */ + jcxz 1f + movw %cx, 0x20(%bp) /* total sectors(large)(lo) */ + movw %dx, 0x22(%bp) /* total sectors(large)(hi), assuming DX = 0 */ +1: + movw 0x20(%bp), %ax /* total sectors(large) */ + movw 0x22(%bp), %bx + addw 0x1c(%bp), %ax /* number of hidden sectors */ + adcw 0x1e(%bp), %bx + subw %si, %ax /* data starting sector */ + sbbw %di, %bx /* BX:AX = total sectors in the data area */ + movb 0x0d(%bp), %dl /* sectors per cluster(DH=0) */ + xchgw %bx, %dx /* DX:AX = total sectors in the data area */ + /* BX = sectors per cluster */ + divw %bx /* AX = total clusters in the data area */ + movw %ax, 0x34(%bp) /* total clusters in the data area */ +#else + movw $0xffff, 0x36(%bp) + movw 0x16(%bp), %ax /* sectors per FAT */ + mulw 0x0b(%bp) /* bytes per sector */ + jc 1f + movw %ax, 0x36(%bp) +1: +#endif + /* Searches for the file in the root directory + * + * Returns: + * AX = first cluster of file + */ + + /* First, read the whole root directory into the temporary buffer */ + + movw 0x2c(%bp), %ax /* root directory starting sector(lo) */ + movw 0x2e(%bp), %dx /* root directory starting sector(hi) */ + movw 0x26(%bp), %di /* number of sectors the root dir occupies */ + lesw (loadseg_off_12_16 - Entry_12_16)(%bp), %bx + /* ES:BX = loadseg:0 */ + call readDisk_12_16 + + lesw (loadseg_off_12_16 - Entry_12_16)(%bp), %di + /* ES:DI = loadseg:0 */ + + + /* Search for kernel file name, and find start cluster */ + +1: + movw $11, %cx + movw $(filename_12_16 - Entry_12_16 + 0x7c00), %si + pushw %di + repz cmpsb + popw %di + movw %es:0x1a(%di), %ax /* get cluster number from dir entry */ + jz 1f + + addw $0x20, %di /* go to next directory entry */ + cmpb %ch, %es:(%di) /* if the first byte of the name is 0, */ + /* there is no more files in the directory */ + /* assuming CH = 0 */ + jnz 1b + movw $(msg_BootError_12_16 - Entry_12_16 + 0x7c00), %si + jmp boot_error_12_16 /* fail if not found */ + +#ifndef ALTERNATIVE_KERNEL +loadseg_off_12_16: .word 0 +loadseg_seg_12_16: .word LOADSEG_12_16 +#endif + +1: + pushw %ax /* store first cluster number */ + /* CX = 0 */ + + + /* Reads the FAT chain and stores it in a temporary buffer in the first + * 64KB. The FAT chain is stored an array of 16-bit cluster numbers, + * ending with 0. + * + * The file must fit in conventional memory, so it can't be larger than + * 640KB. The sector size must be at least 512 bytes, so the FAT chain + * can't be larger than around 3KB. + * + * Call with: AX = first cluster in chain + */ + + /* Load the complete FAT into memory. The FAT can't be larger + * than 128 kb, so it should fit in the temporary buffer. + */ + + lesw (loadseg_off_12_16 - Entry_12_16)(%bp), %bx + /* ES:BX = loadseg:0 */ + movw 0x16(%bp), %di /* sectors per FAT */ + movw 0x28(%bp), %ax /* FAT start sector(lo) */ + movw 0x2a(%bp), %dx /* FAT start sector(hi) */ + call readDisk_12_16 + popw %ax /* restore first cluster number */ + + /* Set ES:DI to the temporary storage for the FAT chain */ + pushw %ds + popw %es + movw (loadseg_seg_12_16 - Entry_12_16)(%bp), %ds + movw $FATBUF, %di + +2: + stosw /* store cluster number */ + movw %ax, %si /* SI = cluster number */ + addw %si, %si /* multiply cluster number by two */ + movw (loadseg_seg_12_16 - Entry_12_16)(%bp), %dx + /* segment for FAT16 */ + jnc 1f + addb $0x10, %dh /* overflow. Add 0x1000 to segment value */ +1: + +#ifdef USE_TOTAL_CLUSTERS + cmpw $0x0ff7, 0x34(%bp) /* total clusters in the data area */ +#else + cmpw $0x1801, 0x36(%bp) /* bytes per FAT */ +#endif + jnb 3f + + /* This is a FAT12 disk */ + + addw %ax, %si /* multiply cluster number by 3 ... */ + shrw $1, %si /* ... and divide by 2 */ + lodsw + + /* If the cluster number was even, the cluster value is now in + * bits 0-11 of AX. If the cluster number was odd, the cluster + * value is in bits 4-15, and must be shifted right 4 bits. If + * the number was odd, CF was set in the last shift instruction. + */ + + jnc 1f + movb $4, %cl + shrw %cl, %ax +1: + andb $0x0f, %ah /* mask off the highest 4 bits */ + cmpw $0x0ff7, %ax /* check for EOF */ + jmp 4f + +3: + /* This is a FAT16 disk. The maximal size of a 16bit FAT + * is 128KB, so it may not fit within a single 64KB segment + */ + + movw %dx, %ds /* DS:SI points to next cluster */ + lodsw /* AX = next cluster */ + + cmpw $0xfff7, %ax /* check for EOF */ +4: + jbe 2b /* continue if not EOF */ + + /* Mark end of FAT chain with 0, so we have a single + * EOF marker for both FAT12 and FAT16 systems. + */ + + xorw %ax, %ax + stosw + + pushw %cs + popw %ds + + /* Loads the file into memory, one cluster at a time */ + + lesw (loadseg_off_12_16 - Entry_12_16)(%bp), %bx + /* ES:BX = loadseg:0 */ + movw $FATBUF, %si /* set DS:SI to the FAT chain */ + +2: + lodsw /* AX = next cluster to read */ + orw %ax, %ax + jnz 1f + + /* EOC encountered - done */ +#ifdef BOOTGRUB + movw 0x24(%bp), %dx /* boot_drive and boot_partition */ +#else + movb 0x24(%bp), %bl /* FreeDOS kernel uses BL, not DL, for drive */ +#endif + ljmp *(loadseg_off_12_16 - Entry_12_16)(%bp) /* boot it! */ + +1: + decw %ax /* cluster numbers start with 2 */ + decw %ax + + movw 0x0d(%bp), %di /* sectors per cluster */ + andw $0xff, %di /* DI = sectors per cluster */ + mulw %di + addw 0x30(%bp), %ax /* data starting sector(lo) */ + adcw 0x32(%bp), %dx /* data starting sector(hi) */ + /* DX:AX = first sector to read */ + call readDisk_12_16 + jmp 2b /* read next cluster */ + +/* Reads a number of sectors into memory. + * + * Call with: DX:AX = 32-bit DOS sector number + * DI = number of sectors to read + * ES:BX = destination buffer + * + * Returns: CF set on error + * ES:BX points one byte after the last byte read. + * DX:AX = next sector number after read + */ + +readDisk_12_16: +2: + pushaw + xorw %cx, %cx + pushw %cx + pushw %cx + pushw %dx + pushw %ax + pushw %es /* buffer segment */ + pushw %bx /* buffer offset */ + incw %cx + pushw %cx /* 1 sector to read */ + movb $16, %cl + pushw %cx /* size of this parameter block */ + + xchgw %ax, %cx /* save AX to CX */ + + /* + * translate sector number to BIOS parameters + * + * LBA = sector-1 offset in track + * + head * sectPerTrack offset in cylinder + * + cyl * sectPerTrack * nHeads offset in platter + * + */ + pushw %bx + movw 0x18(%bp), %ax /* sectors per track */ + movw %ax, %bx + mulb 0x1a(%bp) /* nHeads, but maybe a word value 0x100 */ + jnz 1f + movb %bl, %ah /* nHeads=0x100, so AX=sectPerTrack*0x100 */ +1: + xchgw %ax, %cx /* restore AX from CX, and save AX to CX */ + /* DX:AX = LBA, CX = nHeads * sectPerTrack <= 256*63 */ + divw %cx /* AX = cyl, DX = sector-1 + head * sectPerTrack */ + xchgw %ax, %dx /* DX = cyl, AX = sector-1 + head * sectPerTrack */ + divb %bl /* sectors per track */ + /* DX = cyl, AL = head, AH = sector-1 */ +#if 1 + xchgb %al, %ah /* DX = cyl, AH = head, AL = sector-1 */ + incw %ax /* DX = cyl, AH = head, AL = sector */ + xchgw %ax, %dx /* AX = cyl, DH = head, DL = sector */ + xchgw %ax, %cx /* CX = cyl, DH = head, DL = sector */ + xchgb %cl, %ch /* set cyl number low 8 bits in CH */ + rorb $1, %cl /* move cyl high bits into bits 7-6 */ + rorb $1, %cl /* (assumes top = 0) */ + orb %dl, %cl /* merge sector into cylinder */ +#else + movw %dx, %cx /* CX = cyl, AL = head, AH = sector-1 */ + + /* + * the following manipulations are necessary in order to properly place + * parameters into registers. + * CH = cylinder number low 8 bits + * CL<7-6> = cylinder high two bits + * CL<5-0> = sector + */ + movb %al, %dh /* save head into DH for BIOS */ + xchgb %cl, %ch /* set cyl number low 8 bits in CH */ + rorb $1, %cl /* move cyl high bits into bits 7-6 */ + rorb $1, %cl /* (assumes top = 0) */ + incb %ah /* AH = sector number */ + orb %ah, %cl /* merge sector into cylinder */ +#endif + popw %bx + + movw $0x0201, %ax /* read 1 sector */ +ebios_12_16: /* ebios_12_16 - 1 points to 0x02 that can be changed to 0x42 */ + +// cmpb $0x0e, 2(%bp) /* force LBA? */ +// jnz 1f /* no, continue */ +// movb $0x42, %ah /* yes, use extended disk read */ +//1: + movw %sp, %si /* DS:SI points to disk address packet */ + movb 0x24(%bp), %dl /* drive number */ + int $0x13 +// stc #; only for testing the buggy Virtual PC + popaw /* remove parameter block from stack */ + popaw + jc disk_error_12_16 /* disk read error, jc 1f if caller handles */ + incw %ax /* next sector */ + jnz 1f + incw %dx +1: + addw 0x0b(%bp), %bx /* bytes per sector */ + jnc 1f /* 64K bound check */ + pushw %dx + movw %es, %dx + addb $0x10, %dh /* add 1000h to ES */ + /* here, carry is cleared */ + movw %dx, %es + popw %dx +1: + decw %di + jnz 2b + + /* carry stored on disk read error */ + ret + + . = . - (. - readDisk_12_16)/99 + +msg_DiskReadError_12_16: + + .ascii "disk error\0" + +msg_BootError_12_16: + + .ascii "No " + +filename_12_16: + +#ifdef BOOTGRUB2 + .ascii "G2LDR \0" +#elif defined (BOOTGRUB) + .ascii "GRLDR \0" +#else + .ascii "KERNEL SYS\0" +#endif + +#ifdef ALTERNATIVE_KERNEL +filename_end_12_16: + + . = Entry_12_16 + 0x1e8 + +loadseg_off_12_16: .word 0 +loadseg_seg_12_16: .word LOADSEG_12_16 + + . = Entry_12_16 + 0x1ec + +boot_image_ofs_12_16: + + .word (filename_12_16 - Entry_12_16)+(filename_end_12_16 - filename_12_16 - 1)*2048 +#endif + + . = Entry_12_16 + 0x1ee + +disk_error_12_16: + + movw $(msg_DiskReadError_12_16 - Entry_12_16 + 0x7c00), %si + +boot_error_12_16: + +/* prints string DS:SI (modifies AX BX SI) */ + +//print_12_16: +1: + lodsb (%si), %al /* get token */ + //xorw %bx, %bx /* video page 0 */ + movb $0x0e, %ah /* print it */ + int $0x10 /* via TTY mode */ + cmpb $0, %al /* end of string? */ + jne 1b /* until done */ + + /* The caller will change this to + * ljmp $0x9400, $(try_next_partition - _start1) + */ + +1: jmp 1b + + . = Entry_12_16 + 0x1fc + + .word 0, 0xAA55 /* Win9x uses all 4 bytes as magic value here */ + + . = Entry_12_16 + 0x200 + + . = _start1 + 0x800 + + + + + .arch i486, nojumps + +/* + #; Ext2 boot sector for GRLDR + */ + + +#define DEBUG call debug_print +#undef DEBUG + + //. = _start1 + 0x800 + +Entry_ext2: + + jmp 1f + + . = Entry_ext2 + 0x02 + + /* The default mode is CHS. This is for maximum compatiblity with + * small-sized disks, e.g., floppies. + * + * Valid values are 0x02 for CHS mode, or 0x42 for LBA mode. + * + * If the BIOS int13 supports LBA, this byte can be safely set to 0x42. + * + * Some USB BIOSes might have bugs when using CHS mode, so the format + * program should set this byte to 0x42. It seems that (generally) all + * USB BIOSes have LBA support. + * + * If the format program does not know whether the BIOS has LBA + * support, it may operate this way: + * + * if (partition_start + total_sectors_in_partition) exceeds the CHS + * addressing ability(especially when it is greater than 1024*256*63), + * the caller should set this byte to 0x42, otherwise, set to 0x02. + */ + + .byte 0x02 /* for CHS. Another possible value is 0x42 for LBA */ + + . = Entry_ext2 + 0x03 + +#if 0 + + .ascii "ext2 grldr" + +#else + +msg_DiskReadError_ext2: + + .ascii "I/O error\0" + +#endif + + . = Entry_ext2 + 0x0d + + /* sectors per block. Valid values are 2, 4, 8, 16, 32. */ + + .byte 2 + + . = Entry_ext2 + 0x0e + + /* bytes per block. + * Valid values are 0x400, 0x800, 0x1000, 0x2000, 0x4000. + */ + + .word 1024 /* bytes per block, at most 16K */ + + . = Entry_ext2 + 0x10 + + /* pointers in pointers-per-block blocks, that is, number of blocks + * covered by a double-indirect block. + * Valid values are 0x10000, 0x40000, 0x100000, 0x400000, 0x1000000. + */ + + .long 0x10000 /* number of blocks covered by double-indirect block */ + /* low word=0 */ + + . = Entry_ext2 + 0x14 + + /* pointers per block, that is, number of blocks covered by an indirect + * block. Valid values are 0x100, 0x200, 0x400, 0x800, 0x1000. + */ + + .long 0x100 /* high word=0, low byte=0 */ + + . = Entry_ext2 + 0x18 + + /* this is default for 1.44M floppy, the caller should set it to + * a correct value */ + + .word 18 /* sectors per track */ + + . = Entry_ext2 + 0x1a + + /* this is default for 1.44M floppy, the caller should set it to + * a correct value */ + + .word 2 /* number of heads */ + + . = Entry_ext2 + 0x1c + + /* this is default for 1.44M floppy, the caller should set it to + * a correct value */ + + .long 0 /* hidden sectors */ + + . = Entry_ext2 + 0x20 + + /* total sectors in the filesystem(or in the partition). + * This value is informative. The code does not use it. + */ + + /* this is default for 1.44M floppy, the caller should set it to + * a correct value */ + + .long 2880 + + . = Entry_ext2 + 0x24 + + /* This byte is ignored for read. The program will write DL onto + * this byte. The caller should set drive number in DL. + * We assume all BIOSes pass correct drive number in DL. + * That is to say, buggy BIOSes are not supported!! + */ + + .byte 0 /* drive number */ + + . = Entry_ext2 + 0x25 + + /* this is default for floppies, the caller should set it to + * a correct value for hard-drive partitions */ + + .byte 0xff /* partition number, 0xff for whole drive */ + + . = Entry_ext2 + 0x26 + + .word 0x80 /* inode size */ + + . = Entry_ext2 + 0x28 + + /* this is default for 1.44M floppy, the caller should set it to + * a correct value */ + + .long 2048 /* s_inodes_per_group */ + + . = Entry_ext2 + 0x2c + + /* block number for group descriptors = s_first_data_block + 1. + * Valid values are 2 for 1024-byte blocks, and 1 for otherwise. + */ + + /* this is default for 1.44M floppy, the caller should set it to + * a correct value */ + + .long 2 /* block number for group descriptors */ + + . = Entry_ext2 + 0x30 +1: + cld /* 0xFC */ + + xorw %ax, %ax /* 0x31, 0xC0; CF=0, ZF=1 */ + + /* this byte `nop' will be changed to `cwd' by bootlace for floppy */ + nop /* 0x90=nop, 0x99=cwd */ + /* cwd will set DL=0 forcibly for floppy A: */ + + movw %ax, %ss /* constant SS=0 */ + movw $0x7c00, %sp + + movw %sp, %bp /* constant BP=0x7c00 */ + movw %ax, %ds /* constant DS=0 */ + + pushw %ax /* 0x0000 at 0000:7bfe */ + movw $0x1000, %bx + pushw %bx /* 0x1000 at 0000:7bfc */ + pushw %ax /* 0x0000 at 0000:7bfa */ + /* SP=0x7bfa */ + + /* the 6 bytes in the stack are used by read_block(): + * 0000 ---- -2(%bp) + * 1000 ---- -4(%bp) + * 0000 ---- -6(%bp) + * Don't touch them! + */ + + movb %dl, 0x24(%bp) /* BIOS passes drive number in DL */ + + movb $0x41, %ah + movw $0x55AA, %bx + int $0x13 +#if 0 + jnc 1f + /* No EBIOS */ + movb $0x02, (ebios_ext2 - 1 - Entry_ext2 + 0x7c00) +#else + jc 1f #; No EBIOS + + //testb $1, %cl + //jz 1f #; No EBIOS +#if 0 + /* gcc-4.0.1 does not generate 2-byte code. */ + rcrb $1, %cl #; also can be rorb $1, %cl +#else + .byte 0xD0, 0xD9 #; ror cl: D0 C9 +#endif + jnc 1f #; No EBIOS + + movb $0x42, (ebios_ext2 - 1 - Entry_ext2 + 0x7c00) +#endif +1: + xorl %eax, %eax /* CF=0, ZF=1 */ + +#if 0 + /* the INC touches ZF flag, so use MOV instead */ + + incw %ax + incw %ax /* EAX=2=inode number for root dir */ +#else + + /* MOV keeps all flags untouched, so it is better than INC */ + + movb $2, %al /* EAX=2=inode number for root dir */ +#endif + + /* CF=0, ZF=1 because MOV and PUSH do not touch Flags */ + + /* read root dir to 0000:1000, and grldr to 1000:0000 */ + +4: + /* EAX holds the inode number: for root dir or grldr */ + + /* These 3 PUSHes is intended to place 1000:0000 onto the stack for + * grldr. For root dir, the stack is not used since CF is cleared. + * Although there is no corresponding POPs, this is safe enough + * because the program comes here only twice: the first is for + * the root dir, and the second is for grldr. + * + * For root dir, CF=0 and ZF=1. For grldr, CF=1. + */ + + pushw %di /* 0x1000, see "jz 4b" below. */ + pushw %ss /* 0x0000 */ + pushfw + + /* SP=0x7bf4 for root dir, or 0x7bee for grldr */ + + decl %eax /* EAX=(inode - 1) */ + + /* inode numbers are far less than 0x7fffffff, so it is safe to + * initialise EDX with CDQ */ + + cdq /* let EDX=0 */ + + divl 0x28(%bp) /* s_inodes_per_group */ + /* EAX=group number */ + pushl %edx /* EDX=inode number in the group */ + + /* group numbers are far less than 0x7fffffff, so it is safe to + * initialise EDX with CDQ */ + + cdq /* let EDX=0 */ + shll $5, %eax /* EAX=relative displacement of the group descriptor */ + divl 0x0e(%bp) /* bytes per block */ + /* EAX=relative block number for the group descriptor */ + /* DX=displacement in the block */ + /* EDX high=0 */ + + pushw %dx /* we don't care about EDX high word, because it is 0 */ + + addl 0x2c(%bp), %eax /* EAX=absolute block number for the group descriptor */ + /* CF=0, ZF=0 */ + + call read_block /* 0000:1000 points to the block data containing the group descriptor */ + /* ES changed and > 0, BX=0x1000 */ + /* ECX=EDX=0 */ + /* CF=0, ZF=0 */ + + popw %si /* DS:[BX+SI] points to the group descriptor */ + /* DS:[BX+SI+8] points to the starting block number of the group inode table */ + + popl %eax /* inode number in the group */ +// shll $7, %eax /* inode struct size = 0x80 */ +// /* EAX=relative displacement of the inode struct */ +// /* EDX=0 */ + movw 0x26(%bp), %dx /* EDX=inode size */ + mull %edx /* EDX:EAX=relative displacement of the inode struct */ + + divl 0x0e(%bp) /* bytes per block */ + /* EAX=relative block number for the inode struct */ + pushw %dx /* DX=displacement of the inode struct in the block */ + /* EDX high=0 */ + + addl 8(%bx, %si), %eax /* EAX=absolute block number for the inode struct */ + /* CF=0, ZF=0 */ + + call read_block /* 0000:1000 points to the block data containing the inode struct */ + /* ES changed and > 0, BX=0x1000 */ + /* ECX=EDX=0 */ + /* CF=0, ZF=0 */ + + popw %si /* DS:[BX+SI] points to the inode struct */ + + addw %bx, %si /* DS:SI points to the inode struct */ + + /* Move the inode struct to a known safe area(0000:0fa8 - 0000:0fff), + * that is, 0x58 bytes immediately before 0000:1000. We care about only + * the beginning 0x58 bytes of the 0x80-byte inode struct, the last + * 0x28 bytes are ignored. The area from 0xfa8+0x28 to 0xfa8+0x57 + * stores 12 direct block pointers. + * + * + * At address Initial value Stores what? + * ========== ============= ====================================== + * 0xfa8+0x04 (const) the size of the file in bytes + * + * 0xfa8+0x08 total blocks blocks left to read + * + * 0xfa8+0x0c 0 serial number of the block to read + * + */ + + pushw %ss + popw %es /* ES=0 */ + + leaw -0x58(%bx), %di /* BX=0x1000, so DI=0x0fa8 */ + //movw $0x0fa8, %di + movb $0x2c, %cl /* 0x2c words = 0x58 bytes */ + + repz movsw /* now ECX=0, BX=0x1000=DI */ + + movl %ecx, (0x0c - 0x58)(%di) /* block serial number of the file */ + /* ECX=0 means first block */ + /* DI=0x1000 */ + + movl (0x04 - 0x58)(%di), %eax /* i_size, the file size */ + decl %eax + + divl 0x0e(%bp) /* bytes per block */ + /* EDX=various */ + incl %eax + movl %eax, (0x08 - 0x58)(%di) /* total blocks for file data */ + + /* + * 0000:1000 trebly indirect block + * 0000:8000 indirect block + * 0000:c000 double indirect block + * 1000:0000 the file data + */ + + /* now DS:SI points to indirect block number */ + + lodsl /* indirect block number */ + testl %eax, %eax + jz 1f + + //pushw %ss + //popw %es /* ES=0 */ + movb $0x80, %bh /* ES:BX=0000:8000 */ +#if 0 + stc + call read_block +#else + call read_block_c +#endif + /* ES changed and > 0, BX=0x8000 */ + /* ECX=EDX=0 */ + /* ZF=0, CF=0 */ + + /* now DS:SI points to double indirect block number */ + + lodsl /* double indirect block number */ + testl %eax, %eax + jz 1f + +#if 0 + pushw %ss + popw %es /* ES=0 */ + movb $0xc0, %bh /* ES:BX=0000:c000 */ + stc + call read_block +#else + movb $0xc0, %bh /* ES:BX=0000:c000 */ + call read_block_c +#endif + /* ES changed and > 0, BX=0xc000 */ + /* ECX=EDX=0 */ + /* ZF=0, CF=0 */ + + /* now DS:SI points to trebly indirect block number */ + + lodsl /* trebly indirect block number */ + testl %eax, %eax /* CF=0, TEST always clears CF */ + jz 1f + /* ZF=0 */ + //pushw %ss + //popw %es /* ES=0 */ + //movb $0x10, %bh /* ES:BX=0000:1000 */ + //stc + call read_block /* 0000:1000 points to the block data */ + /* ES changed and > 0, BX=0x1000 */ + /* ECX=EDX=0 */ + /* ZF=0, CF=0 */ + + /* the block at 0000:1000, which contains the indirect block numbers, + * is just overwritten by the trebly indirect block */ + +1: + /* get absolute block number by block serial number */ + + movl (0x0c - 0x58)(%di), %ebx /* block serial number of the file */ + subl $12, %ebx + jc 3f /* direct block: block serial number < 12 */ + + pushw %bx + subl 0x14(%bp), %ebx + popw %ax + jnc 2f + + /* indirect block: 12 <= block serial number < 12 + 0x14(%bp) */ + + //addw 0x14(%bp), %bx + addb $(0x70 / 4), %ah + //xchgw %ax, %bx + jmp 8f + +2: + pushl %ebx + subl 0x10(%bp), %ebx + jc 7f /* EBX on the stack is < 0x10(%bp). double indirect block: + * 12 + 0x14(%bp) <= block serial number < 12 + 0x14(%bp) + 0x10(%bp) + */ + + /* trebly indirect block: block serial number >= 12 + 0x14(%bp) + 0x10(%bp) */ + + popl %eax /* discard the stack */ + xchgl %eax, %ebx /* move EBX to EAX */ + /* EDX=0 */ + divl 0x10(%bp) + /* EAX=indirect block number, < 0x14(%bp) */ + /* EDX=block number, < 0x10(%bp) */ + + pushl %edx /* EDX < 0x10(%bp) */ + testl %edx, %edx + jnz 7f + + /* EDX=0, so we need to load the double indirect block */ + + shlw $2, %ax + xchgw %ax, %bx + + /* get the double indirect block number from the trebly indirect + * block data */ + + movl (%bx, %di), %eax + +//6: + movw $0xc000, %bx /* ES:BX=0000:c000 */ + + //pushw %ss + //popw %es /* ES=0 */ + //stc + call read_block_c /* 0000:c000 points to the block data */ + /* ES changed and > 0, BX=0xc000 */ + /* ECX=EDX=0 */ + /* CF=0, ZF=0 */ +7: + popl %eax /* EAX < 0x10(%bp) */ + cdq /* let EDX=0 (notice the above jc 7f and jnz 7f) */ + divl 0x14(%bp) + /* EAX=indirect block number, < 0x14(%bp) */ + /* EDX=block number, < 0x14(%bp) */ + + pushw %dx /* EDX < 0x14(%bp) */ + testw %dx, %dx + jnz 7f + + /* if DX=0, we need to load the indirect block */ + + //addb $(0xb0 / 4), %ah + shlw $2, %ax + xchgw %ax, %bx + + /* get the indirect block number from the double indirect block data */ + + movl 0xb000(%bx, %di), %eax + //movl (%bx, %di), %eax +//5: + movw $0x8000, %bx /* ES:BX=0000:8000 */ + + //pushw %ss + //popw %es /* ES=0 */ + //stc + call read_block_c /* 0000:8000 points to the block data */ + /* ES changed and > 0, BX=0x8000 */ + /* ECX=EDX=0 */ + /* CF=0, ZF=0 */ +7: + popw %ax /* AX < 0x14(%bp) */ +8: + xchgw %ax, %bx +3: + shlw $2, %bx + movl (%bx, %di), %eax + + /* got it! EAX=absolute block number */ + + /* read block data to 1000:0000. For root dir, read each block to + * 1000:0000(overwrite the previous read). For grldr, read blocks + * one by one to the area starting at 1000:0000. + */ + + popfw + popw %bx + popw %es + pushfw + + /* CF=0 and ZF=1 for reading root dir, CF=1 for reading grldr */ + + call read_block /* 1000:0000 points to the block data */ + /* ES changed and > 0x1000, BX=0 */ + /* ECX=EDX=0 */ + /* CF=0, ZF=0 */ + + popfw + pushw %es + pushw %bx + pushfw + + jc 3f /* CF=1, we are reading grldr */ + + /* We have just read a block of the root dir to 1000:0000. + * So we check all dir entries in the block to see if anyone + * matches grldr. + */ + + xorw %si, %si + pushw %ss + popw %es /* ES=0 */ + +2: + pushw %ds /* DS=0 */ + movw %di, %ds /* DS=0x1000 */ + movw $(filename_ext2 - Entry_ext2 + 0x7c00), %di + + pushw %si + lodsl /* This is possible inode number for grldr */ + pushl %eax /* This is possible inode number for grldr */ + lodsw + xchgw %ax, %dx /* rec_len */ + lodsw /* AL=name_len, should be 5 for grldr */ + /* AH=file_type(1 for regular file) */ +#if 0 + cmpw $0x0105, %ax + jnz 5f + movb %al, %cl /* CH is already 0 */ + repz cmpsb +#else + decb %ah + //jnz 5f + xchgw %ax, %cx /* CX=name_len */ + repz cmpsb + jnz 5f + xchgw %ax, %cx /* movb $0, %al */ + scasb +#endif +5: + popl %eax /* This is possible inode number for grldr */ + popw %si + + /* DS=0x1000, EAX=inode number */ + + movw %ds, %di /* DI=0x1000 */ + popw %ds /* DS=0 */ + + stc /* indicates the new inode is for grldr */ + + jz 4b /* grldr is found with EAX=inode number */ + + addw %dx, %si + cmpw 0x0e(%bp), %si /* bytes per block */ + jb 2b + + /* file not found in this block, continue */ + + /* We are lucky that CF=0, which indicates we are dealing with + * the root dir. + */ + +3: + + /* CF=1 for grldr, CF=0 for root dir. */ + + incl (0x0c - 0x58)(%di) + decl (0x08 - 0x58)(%di) + jnz 1b + +#if 0 + /* The above 2 instructions INC and DEC do not touch CF, so we + * can omit this POP-PUSH pair. + */ + + popfw + pushfw +#endif + + movw $(msg_No_grldr_ext2 - Entry_ext2 + 0x7c00), %si + + jnc boot_error_ext2 /* grldr not found in the root dir */ + + /* All grldr blocks have been loaded to memory starting at 1000:0000, + * Before the boot, we pass boot_drive and boot_partition to grldr. + */ + + /* ES>0x1000, BX=0, ECX=EDX=0, DI=0x1000, SS=0, SI>0x7c00, DS=0 + * BP=0x7c00, SP<=0x7c00 + */ + + movw 0x24(%bp), %dx + + /* boot it now! */ + + pushw %di /* 0x1000 */ + pushw %ss /* 0x0000 */ + lret + +read_block_c: + + pushw %ss + popw %es /* ES=0 */ + stc + +/* read_block - read a block + * input: CF - indicator for overlap or consecution + * EAX = block number + * ES:BX - buffer + * + * output: if CF is cleared on input, ES:BX is initialized to 0000:1000 + * ES:BX - buffer filled with data + * ES, EAX - Changed + * ECX = 0 + * EDX = 0 + * ZF = 0 + * CF = 0 + */ + +read_block: + + jc 1f + + .byte 0xC4, 0x5E, 0xFC /* lesw -4(%bp), %bx */ + /* ES:BX=0000:1000 */ + jnz 1f + + //at this time, the gcc cannot generate 3 byte code + .byte 0xC4, 0x5E, 0xFA /* lesw -6(%bp), %bx */ + /* ES:BX=1000:0000 */ + //. = . - (. - read_block) / 6 +1: + movzbl 0x0d(%bp), %ecx /* CX=sectors per block */ + /* ECX high=0 */ + . = . - (. - 1b) / 6 + mull %ecx /* EAX=relative sector number */ + /* EDX=0 */ + . = . - (. - 1b) / 9 + addl 0x1c(%bp), %eax /* EAX=absolute sector number */ + +#if 1 + /* pass through, saving 4 bytes(call and ret) */ +#else + call readDisk_ext2 + ret +#endif + +/* Read sectors from disk, using LBA or CHS + * input: EAX = 32-bit LBA sector number + * CX = number of sectors to read + * ECX high word = 0 + * ES:BX = destination buffer + * + * output: No return on error + * BX not changed + * ES = ES + 0x20 * CX + * EAX = EAX + CX + * ZF = 0 + * CF = 0 + */ + +readDisk_ext2: +2: + pushal + //xorl %edx, %edx /* EDX:EAX = LBA */ + pushl %edx /* hi 32bit of sector number */ + pushl %eax /* lo 32bit of sector number */ + pushw %es /* buffer segment */ + pushw %bx /* buffer offset */ + pushw $1 /* 1 sector to read */ + pushw $16 /* size of this parameter block */ + + //xorl %ecx, %ecx + pushl 0x18(%bp) /* lo:sectors per track, hi:number of heads */ + popw %cx /* ECX = sectors per track */ + divl %ecx /* residue is in EDX */ + /* quotient is in EAX */ + /* EDX high=0, DH=0 */ + incw %dx /* DL=sector number */ + popw %cx /* ECX = number of heads */ + pushw %dx /* push sector number into stack */ + xorw %dx, %dx /* EDX:EAX = cylinder * TotalHeads + head */ + divl %ecx /* residue is in EDX, head number */ + /* quotient is in EAX, cylinder number */ + /* EDX high=0, EAX high=0 */ + + + xchgb %dl, %dh /* head number should be in DH */ + /* DL = 0 */ + popw %cx /* pop sector number from stack */ + xchgb %al, %ch /* lo 8bit cylinder should be in CH */ + /* AL = 0 */ + shlb $6, %ah /* hi 2bit cylinder ... */ + orb %ah, %cl /* ... should be in CL */ + + incw %ax /* AL=1, read 1 sector */ + + /* Instead of 0x0e, the LBA indicator at 2(%bp) is + * + * 0x42 for LBA + * + * and + * + * 0x02 for CHS + */ +#if 0 + movb $0x42, %ah + /* ebios_ext2 - 1 points to 0x42 that can be changed to 0x02 */ +#else + movb $0x02, %ah + /* ebios_ext2 - 1 points to 0x02 that can be changed to 0x42 */ +#endif +ebios_ext2: + + //andb 2(%bp), %ah + + movw %sp, %si /* DS:SI points to disk address packet */ + movb 0x24(%bp), %dl /* drive number */ + int $0x13 + jc disk_error_ext2 + movw %es, %ax + addw $0x20, %ax /* here, carry is cleared */ + movw %ax, %es + popaw /* remove parameter block from stack */ + popal + incl %eax /* next sector, here ZF=0 */ + loop 2b + ret + + //. = . - (. - readDisk_ext2)/74 + +//msg_DiskReadError_ext2: +// +// .ascii "disk error\0" + +msg_No_grldr_ext2: + + .ascii "No " + +filename_ext2: +#ifdef BOOTGRUB2 + .ascii "g2ldr\0" +#else + .ascii "grldr\0" +#endif + . = Entry_ext2 + 0x1ee + +filename_end_ext2: + + .word (filename_ext2 - Entry_ext2)+(filename_end_ext2 - filename_ext2 - 1)*2048 + + . = Entry_ext2 + 0x1f0 + +disk_error_ext2: + + movw $(msg_DiskReadError_ext2 - Entry_ext2 + 0x7c00), %si + +boot_error_ext2: + +/* prints string DS:SI (modifies AX BX SI) */ + +//print_ext2: +1: + lodsb (%si), %al /* get token */ + //xorw %bx, %bx /* video page 0 */ + movb $0x0e, %ah /* print it */ + int $0x10 /* via TTY mode */ + cmpb $0, %al /* end of string? */ + jne 1b /* until done */ +#if 1 + + /* The caller will change this to + * ljmp $0x9400, $(try_next_partition - _start1) + */ + +1: jmp 1b + +#else + /* boot failed, try to hand over the control to supervisor */ + ldsw (1f + 3 - Entry_ext2)(%bp), %si + lodsl + cmpl $0x9400b8fa, %eax +1: jnz 1b /* no supervisor, hang up. */ + ljmp $0x9400, $(try_next_partition - _start1) + + //. = . - (. - disk_error_ext2) / 30 +#endif + + . = Entry_ext2 + 0x1fe + + .word 0xAA55 + + . = _start1 + 0xA00 + +#define INSIDE_GRLDR + +#include "ntfsbs.S" + + . = _start1 + 0x1200 + + .arch i586, jumps + +#ifdef DEBUG + + . = Entry_ext2 + 0x201 + +debug_print: + + pushfl + pushal + movl %eax, %ebp + call 2f +#if 0 + popal + pushal + movl %ebx, %ebp + call 2f + popal + pushal + movl %ecx, %ebp + call 2f + popal + pushal + movl %edx, %ebp + call 2f + popal + pushal + movl %esi, %ebp + call 2f + popal + pushal + movl %edi, %ebp + call 2f + popal + popfl + pushfl + pushal + pushfl + popl %ebp /* flags */ + call 2f + movw %ds, %bp + shll $16, %ebp + movw %es, %bp + call 2f + movw $0x0e0d, %ax /* print CR */ + int $0x10 /* via TTY mode */ + movw $0x0e0a, %ax /* print LF */ + int $0x10 /* via TTY mode */ +#endif + popal + popfl + ret +2: + movw $7, %cx +1: + xorw %bx, %bx /* video page 0 */ + movl %ebp, %eax + shrl %cl, %eax + shrl %cl, %eax + shrl %cl, %eax + shrl %cl, %eax + andb $0x0f, %al + addb $0x30, %al + movb $0x0e, %ah /* print char in AL */ + int $0x10 /* via TTY mode */ + + decw %cx + testw %cx, %cx + jns 1b + + movw $0x0e20, %ax /* print space */ + int $0x10 /* via TTY mode */ + ret +#endif + +#if 1 + /* restore GRLDR_CS */ + + /* this code is executed at 0000:MONITOR, which must be a 16-byte + * aligned address. The address 0000:MONITOR should be designed in + * a way that could avoid memory confliction with volume boot records + * (currently FAT12/16/32/NTFS/EXT2/3 are built in). + */ + + /* CS=code */ + + .align 16 + +restore_GRLDR_CS: +2: + call 1f +1: + popw %bx # instruction pointer of 1b + movw %cs, %ax + shrw $4, %bx + addw %ax, %bx # BX=segment value of this code + pushw %bx + pushw $(1f - 2b) + lret +1: + /* modify gdt base */ + xorl %eax, %eax + movw %bx, %ax + shll $4, %eax + addl $(gdt -2b), %eax + movl %eax, %cs:(gdt - 2b + 2) + + movw $GRLDR_CS, %bx + movw %bx, %es + movw %ds, %bx # save old DS to BX + + cli + lgdt %cs:(gdt - 2b) + movl %cr0, %eax + orb $1, %al + movl %eax, %cr0 + + movw $8, %si + movw %si, %ds + + xorl %esi, %esi + xorl %edi, %edi + movl $(0x9000 / 4), %ecx + + cld + repz movsl + + movw $16, %si + movw %si, %ds + + andb $0xfe, %al + movl %eax, %cr0 + + movw %bx, %ds # restore DS from BX + + ljmp $GRLDR_CS, $(try_next_partition - _start1) + +#endif + +# Descriptor tables +# +# NOTE: The intel manual says gdt should be sixteen bytes aligned for +# efficiency reasons. However, there are machines which are known not +# to boot with misaligned GDTs, so alter this at your peril! If you alter +# GDT_ENTRY_BOOT_CS (in asm/segment.h) remember to leave at least two +# empty GDT entries (one for NULL and one reserved). +# +# NOTE: On some CPUs, the GDT must be 8 byte aligned. This is +# true for the Voyager Quad CPU card which will not boot without +# This directive. 16 byte aligment is recommended by intel. +# + .align 16 +gdt: + /* this is the default null entry in GDT */ + .word gdt_end - gdt - 1 # gdt limit + .long (GRLDR_CS * 16 + gdt - _start1) # linear address of gdt + .word 0 # pad 2 bytes + + /* real mode data segment base=0x200000 */ + .word 0xFFFF, 0 + .byte 0x20, 0x92, 0, 0 + + /* real mode data segment base=0 */ + .word 0xFFFF, 0 + .byte 0, 0x92, 0, 0 + +gdt_end: + +helper_start: + + /* helper function begins here + * before the call: + * CF=1 : indicates an invalid or corrupt entry + * CF=0 : indicates a valid entry + * + * on return: + * CF=1 : means "below", try next entry + * CF=0,ZF=1 : means "equal", helper did nothing, so we need + * a further try to boot via NT bootsector + * CF=0,ZF=0 : means "above", helper succeeded, boot it now + */ + + sti + + /* DS=SS=0x9400 */ + pushw %cs + popw %ds + + pushw $FS_BOOT + popw %es + + /* ES=FS_BOOT */ + + /* Format of partition information blocks. + * + * Offset Length in bytes Field + * 00h 1 Set to 80h if this partition is active. + * 01h 1 Partition's starting head. + * 02h 2 Partition's starting sector and track. + * 04h(SI) 1 Partition's ID number. + * 05h 1 Partition's ending head. + * 06h 2 Partition's ending sector and track. + * 08h 4 Starting LBA. + * 0Ch 4 Partition's length in sectors. + */ + + pushw %ds /* DS=0x9400 */ + pushw %es /* ES=FS_BOOT */ + pushal + pushfw + + //pushw %si + //stc + //jc invalid_or_null /* invalid or null entry */ +#if 0 + /* backup 63 sectors at FS_BOOT:0 to 63 sectors at FS_BOOT:8000 + * this piece of code is no longer useful. + */ + pushw %es + popw %ds + xorw %si, %si + movw $0x8000, %di + movw $0x3f00, %cx + cld + repz movsw +#endif + +#if (defined(GRLDR_MBR)) || (defined(GRLDR_INSTALL)) + testb $0x80, %cs:0x02 /* boot previous MBR first? */ + jnz 2f /* no, continue to find GRLDR */ + + /* yes, call the routine for booting the previous MBR. + * it will not return on success. + * on failure, it will return here + */ + + /* before we call the routine, we will check if the user want to + * skip this step and continue to find the GRLDR + */ +#if 0 + movw $(press_space_bar_string - _start1), %si + cmpw $0x3920, %cs:0x04 + je 1f + movw $(press_hot_key_string - _start1), %si +1: + /* if timeout==0, don't display the message */ + + cmpb $0, %cs:0x03 + je 1f + call print_message /* CS:SI points to message string */ + movw $(press_any_key_string - _start1), %si + call print_message /* CS:SI points to message string */ +#else + cmpb $0, %cs:0x03 + je 1f + movw $(press_hot_key_pre - _start1), %si + call print_message + movw $(press_hot_key_name - _start1), %si + call print_message + movw $(press_hot_key_sub - _start1), %si + call print_message +#endif +1: + call sleep_5_seconds + jc 1f /* desired hot-key pressed */ + call boot_prev_mbr //Error_modify +1: + orb $0x80, %cs:0x02 +2: +#endif + popfw + popal + popw %es + popw %ds + + pushw %ds /* DS=0x9400 */ + pushw %es /* ES=FS_BOOT */ + pushal + pushfw + + //cmpb $0x0e, 0x00 /* EBIOS previously checked OK? */ + //jbe 1f /* yes, skip the check */ + movb $0x02, 0x00 /* initialise this byte to 0x02 */ + movb $0x41, %ah /* EBIOS check existence */ + movw $0x55aa, %bx + int $0x13 + jc 1f /* No EBIOS */ + cmpw $0xaa55, %bx + jnz 1f /* No EBIOS */ + testb $1, %cl + jz 1f /* No EBIOS */ + movb $0x42, 0x00 /* LBA supported, save 0x42 to 9400:0000 */ +1: + popfw + popal + popw %es + popw %ds + + pushw %ds /* DS=0x9400 */ + pushw %es /* ES=FS_BOOT */ + pushal + pushfw + + pushaw + cmpw $0x1c2, %si + jne 1f + /* initialize partition number and partition entries end */ + movw $0xffff, 0x1bc /* hd partition number */ + movw $0x01fe, 0x1ba /* partition entries end */ +1: + pushw %dx + testb %dl, %dl + jns 1f /* floppy, use normal CHS mode */ + cmpw $0x1f2, %si /* is it a primary partition? */ + ja 2f /* no, it is an extended partition */ + movl 4(%si), %eax + movl %eax, 8(%si) /* parent part_start saved here */ + xorl %eax, %eax + movl %eax, 4(%si) /* current part_start(0) saved here */ +2: + //movl -4(%si), %eax + //cmpl $0xfffffe00, %eax /* check the starting CHS */ + //jb 1f /* use normal CHS mode */ + + /* get CHS total number of sectors */ + pushw %es + pushw %ds + movb $8, %ah /* read drive parameters changes DX,ES,DI */ + //movb $0x80, %dl /* BIOS drive number is in DL */ + int $0x13 + popw %ds + popw %es + jc 3f + testb $63, %cl + jnz 2f +3: + /* failed to get drive parameters, use maximum value */ +#if 0 + popw %dx + pushw %dx + cmpb $0x80, %dl + jne 3f + pushw %ds + xorw %ax, %ax + movw %ax, %ds + cmpb $0, 0x475 + popw %ds + je 3f + +3: +#endif + movw $0xffff, %cx + movw %cx, %dx +2: + //xorl %eax, %eax + movzbl %dh, %eax + incw %ax + movzbl %cl, %edx + andb $63, %dl + mulw %dx /* DX=0, AX=product */ + shrb $6, %cl + xchgb %cl, %dh + xchgb %ch, %dl + incw %dx /* DX=total cylinders */ + mull %edx /* EDX=0, EAX=product */ + + /* check the partition's starting LBA */ + movl 4(%si), %ebx + addl 8(%si), %ebx /* EBX=start_LBA */ + + testl %ebx, %ebx + je 1f + + ///* we always use LBA mode */ + ////cmpl %eax, %ebx + ////jb 1f /* use normal CHS mode */ + cmpb $0x42, 0x00 /* EBIOS present? */ + jne 1f /* no, skip the LBA mode int13 call */ + + /* load partition boot track to FS_BOOT using LBA mode */ + popw %ax /* AX=orig DX which holds drive number DL */ + pushw %ax + pushl %edx /* EDX=0, higher 4 bytes of starting LBA */ + pushl %ebx /* lower 4 bytes of starting LBA */ + pushw %es /* ES=FS_BOOT */ + pushw %dx /* DX=0, ES:0 is the buffer */ + //pushl $0x003f0010 /* transfer 63 sectors */ + pushw $0x3f /* transfer 63 sectors */ + pushw $0x10 /* size of disk address packet */ + xchgw %ax, %dx /* restore drive number DL from AL */ + movb $0x42, %ah /* extended read */ + movw %sp, %si /* DS:SI points to disk address packet */ + int $0x13 /* ignore the read failure */ + popaw /* adjust the stack */ + jc 1f + popw %dx + popaw + + //popw %ax /* discard flags in the stack */ + popfw + clc + + pushfw /* push new flags with CF=0 */ + pushaw + pushw %dx +1: + popw %dx + popaw + + popfw + popal + popw %es + popw %ds + + pushw %ds /* DS=0x9400 */ + pushw %es /* ES=FS_BOOT */ + pushal + pushfw + + pushw %si + + pushfw + pushw %es +//--------------------------------------------------------- + /* print "Try (hd0,n): " or "Try (fd0): "*/ + pushw %ds + popw %es /* ES=DS=CS=0x9400 */ + + cld /* for stosb */ + xorw %ax, %ax + testb %dl, %dl + jns 1f /* floppy */ + /* hard drive */ +#if 0 + movw %si, %ax + subw $0x1c2, %ax + shrw $4, %ax + cmpw $0x1fe, %si /* is in MBR? */ + jb 1f /* yes */ + /* no, it is an entry in an extended partition */ + movb $0xFC, (add_sub_si + 2 - _start1) /* addw $-4, %si */ + incw 0x1bc /* logical partition number */ + movb 0x1bc, %al +#else + incw 0x1bc /* logical partition number */ + movw 0x1bc, %ax + cmpb $4, %al + jb 1f + movb $0xFC, (add_sub_si + 2 - _start1) /* addw $-4, %si */ +#endif +1: + /* AL=partition number, AH=0 */ + pushw %ax + + movw $(partition_message - _start1 + 7), %di /* drive type */ + movb %dl, %al + shrb $7, %al /* drive type: floppy=0, harddrive=1 */ + shlb $1, %al + addw $0x6466, %ax /* "fd" or "hd" */ + stosw + movb %dl, %al + andb $0x7f, %al /* drive number */ + aam /* convert binary to decimal, AH=high, AL=low */ + testb %ah, %ah + jz 1f + addb $0x30, %ah + movb %ah, (%di) + incw %di +1: + addb $0x30, %al + stosb + + popw %ax + + testb %dl, %dl + jns 2f /* floppy */ + /* this is a hard drive, the partition number is in AL */ + movb $0x2c, (%di) /* "," */ + incw %di + aam /* convert binary to decimal, AH=high, AL=low */ + testb %ah, %ah + jz 1f + addb $0x30, %ah + movb %ah, (%di) + incw %di +1: + addb $0x30, %al + stosb +2: + movl $0x00203a29, (%di) /* "): \0" */ + + movw $(partition_message - _start1), %si + call print_message /* CS:SI points to message string */ +//--------------------------------------------------------- + popw %es + popfw + //stc + jc invalid_or_null /* invalid or null entry */ + + xorw %si, %si + pushw %es + popw %ds + + /* DS=ES=FS_BOOT */ + + /* First, check for ext2 filesystem */ + + cmpw $0xEF53, 0x438 /* Magic signature */ + jnz 1f + xorl %eax, %eax + cmpl %eax, 0x400 /* s_inodes_count */ + jz 1f + cmpl %eax, 0x404 /* s_blocks_count */ + jz 1f +// cmpw %ax, 0x458 /* s_inode_size, usually 0x80 */ +// jz 1f + cmpl %eax, 0x420 /* s_blocks_per_group */ + jz 1f + cmpl %eax, 0x428 /* s_inodes_per_group */ + jz 1f + movl 0x414, %eax /* s_first_data_block */ + movw %ax, %bx /* BX=1 for 1K block, 0 otherwise */ + shrl $1, %eax /* must be 0 */ + jnz 1f + movl 0x418, %ecx /* s_log_block_size */ + cmpl $4, %ecx /* max size of block is 16K */ + ja 1f + negw %cx /* CF=0 for 1K block, CF=1 otherwise */ + adcw %ax, %bx /* EAX=0 */ + decw %bx + jnz 1f + + /* BX = 0 */ + /* EAX= 0 */ + + movw $0x80, %ax /* EXT2_GOOD_OLD_INODE_SIZE */ + movw %ax, %cs:0x826 /* inode size */ + movl 0x44C, %ecx /* ECX=s_rev_level */ + jecxz 3f /* EXT2_GOOD_OLD_REV */ + movw 0x458, %ax /* AX=s_inode_size */ + testw %ax, %ax + jz 1f /* invalid inode size */ + pushw %ax + pushw %dx + movb 0x418, %cl /* s_log_block_size */ + addb $10, %cl + xorw %dx, %dx /* DX=0 */ + incw %dx /* DX=1 */ + shlw %cl, %dx /* DX=block size in bytes */ + xchgw %ax, %cx /* CX=s_inode_size */ + xchgw %ax, %dx /* AX=block size in bytes */ + xorw %dx, %dx /* DX:AX=block size in bytes */ + divw %cx /* quo=AX, rem=DX */ + testw %dx, %dx + popw %dx + popw %ax + jnz 1f /* invalid inode size */ + movw %ax, %cs:0x826 /* inode size */ +3: + /* BX = 0 */ + + /* super block is sane */ + + //pushw %cs + //popw %ds + ///* DS=SS=0x9400 */ + ///* ES=FS_BOOT */ + cld + movw $0x800, %si + xorw %di, %di + movw $0x0200, %cx /* yes, we need 2 sectors if enable debug */ + + repz cs movsw /* CS segment override prefix(=0x2E) */ + + /* modify the boot partition number */ + + /* the boot partition number is at offset 0x25 for ext2 */ + + testb %dl, %dl + jns 3f /* no modification for floppy */ + movw $0x25, %di + movw %cs:0x1bc, %ax /* partition number */ + stosb +3: + /* fix for ext2 partition: hidden_sectors, offset 0x1c */ + popw %si /* DI points to old entry in MBR */ + pushw %si + xorl %eax, %eax /* let hidden_sectors=0 for floppy */ + testb %dl, %dl + jns 3f /* floppy */ + movl %cs:4(%si), %eax + addl %cs:8(%si), %eax +3: + /* BX = 0 */ + + movl %eax, %es:0x1c(%bx) /* adjust hidden_sectors for EXT2 */ + + /* fix for ext2 partition: EBIOS indicator, offset 0x02 */ + + movb %cs:0x00(%bx), %al + movb %al, %es:0x02(%bx) + + /* fix for ext2 partition: sectors per block, offset 0x0d */ + /* fix for ext2 partition: bytes per block, offset 0x0e */ + /* fix for ext2 partition: dwords per block(dpb), offset 0x14 */ + /* fix for ext2 partition: square of dpb, offset 0x10 */ + + movb %es:0x418, %cl /* s_log_block_size */ + //incw %cx + movl $2, %eax + shlw %cl, %ax + movb %al, %es:0x0d(%bx) + shlw $9, %ax /* block size is word wide */ + movw %ax, %es:0x0e(%bx) + shrw $2, %ax + movl %eax, %es:0x14(%bx) + addb $8, %cl + shll %cl, %eax + movl %eax, %es:0x10(%bx) + + + /* fix for ext2 partition: sectors per track, offset 0x18 */ + /* fix for ext2 partition: number of heads, offset 0x1a */ +#if 1 + pushw %ds + pushw %es + pushw %bx + pushw %dx + movb $8, %ah /* read drive parameters changes DX,ES,DI,BX */ + movb $0x80, %dl /* BIOS drive number is in DL */ + int $0x13 + movw %dx, %ax + popw %dx + popw %bx + popw %es + popw %ds + jc 3f + andb $63, %cl + jz 3f + movb %cl, %es:0x18(%bx) + shrw $8, %ax + incw %ax + movw %ax, %es:0x1a(%bx) +3: +#else + testb %dl, %dl + jns 3f /* floppy */ + popw %di /* DI points to old entry in MBR */ + pushw %di + movw %cs:1(%di), %ax + andb $63, %ah + movb %ah, %es:0x18 + xorb %ah, %ah + incw %ax + movw %ax, %es:0x1a +3: +#endif + + /* fix for ext2 partition: s_inodes_per_group, offset 0x28 */ + movl %es:0x428, %eax /* s_inodes_per_group */ + movl %eax, %es:0x28(%bx) + + /* fix for ext2 partition: block number for group descriptors, offset 0x2c */ + /* At which block the group descriptors begin? */ + movl %es:0x414, %eax /* s_first_data_block */ + incw %ax + movl %eax, %es:0x2c(%bx) + + /* fix for ext2 partition: on error go back to supervisor, offset 0x01fc */ + movw $0x01fc, %si + movw %si, %di + lodsw + cmpw $0xFEEB, %ax /* EB FE is jmp back to itself(infinite loop) */ + jnz 3f + decw %ax /* AL=0xEA, ljmp */ + stosb + //movw $(try_next_partition - _start1), %ax + movw $MONITOR, %ax + stosw + //movw %cs, %ax /* AX=0x9400 */ + xorw %ax, %ax + stosw /* the last byte 0x00 is in the next sector! */ +// addw $0x0f, %di +// movw $(restore_GRLDR_CS - _start1), %si +// movw $((gdt_end - restore_GRLDR_CS) / 4), %cx +// .byte 0x2e /* %cs: prefix */ +// repz movsl +3: + + movw $(EXT2_message - _start1), %si + call print_message /* CS:SI points to message string */ + + clc + jmp move_entries_and_return + +1: + #; It is not EXT2. Check for FAT12/16/32/NTFS. + + /* DS=ES=FS_BOOT */ + + cmpw $0x200, 0x0b(%si) /* bytes per sector */ + jne 1f /* not a normal BPB */ + movb 0x0d(%si), %al /* sectors per cluster */ + testb %al, %al + jz 1f /* invalid if = 0 */ + movb %al, %cl + movw $128, %ax + divb %cl /* quo=AL, rem=AH */ + testb %ah, %ah + jnz 1f /* invalid if not 2^n */ + movw 0x18(%si), %ax /* sectors per track */ + testw %ax, %ax + jz 1f /* invalid if = 0 */ + cmpw $63, %ax + ja 1f /* invalid if > 63 */ + movw 0x1a(%si), %ax /* number of heads */ + decw %ax /* Max head number, should be a byte */ + testb %ah, %ah /* should be 0 */ + jnz 1f /* invalid if number of heads > 256 */ + cmpb $0xf0, 0x15(%si) /* media descriptor */ + jb 1f + + cmpb $0x42, %cs:0x00 /* EBIOS present? */ + jne 3f + //movb $0x41, %ah /* EBIOS check existence */ + //movw $0x55aa, %bx + //int $0x13 + //jc 3f /* No EBIOS */ + //cmpw $0xaa55, %bx + //jnz 3f /* No EBIOS */ + //testb $1, %cl + //jz 3f /* No EBIOS */ + movb $0x0e, 0x02(%si) /* force LBA */ +3: + cld + movw $0x0600, %bx /* FAT12/FAT16 */ + movw $0x003c, %cx /* FAT12/FAT16 */ + + movb 0x10(%si), %al /* number of FATs(NTFS:0, FAT:1,2) */ + cmpb $2, %al + ja 1f /* abnormal FAT */ + movw 0x11(%si), %ax /* max root entries */ + testw %ax, %ax + jnz 2f /* FAT12/FAT16 */ + + /* FAT32 or NTFS */ + movw 0x13(%si), %ax /* total sectors(small) */ + testw %ax, %ax + jnz 1f /* invalid FAT32 BPB */ + movw 0x16(%si), %ax /* sectors per FAT(small) */ + testw %ax, %ax + jnz 1f /* invalid FAT32 BPB */ + movb 0x10(%si), %al /* number of FATs(NTFS:0, FAT:1,2) */ + testb %al, %al + jz 8f + + /* FAT32 */ + movl 0x20(%si), %eax /* FAT32 total sectors */ + testl %eax, %eax + jz 1f + movl 0x24(%si), %eax /* FAT32 sectors per FAT */ + testl %eax, %eax + jz 1f + movw $0x0400, %bx /* FAT32 */ + movw $0x0058, %cx /* FAT32 */ + movw $(FAT32_message - _start1), %si + jmp 7f +8: + /* NTFS */ + movl 0x20(%si), %eax /* FAT32 total sectors */ + testl %eax, %eax + jnz 1f + //movw 0x11(%si), %ax /* max root entries */ + //testw %ax, %ax + //jnz 1f + movw 0x0e(%si), %ax /* reserved sectors */ + testw %ax, %ax + jnz 1f + + /* BUG fix for extended NTFS partition */ + popw %si /* SI points to old entry in MBR */ + pushw %si + xorl %eax, %eax /* let hidden_sectors=0 for floppy */ + testb %dl, %dl + jns 3f /* floppy */ + movl %cs:4(%si), %eax + addl %cs:8(%si), %eax +3: + movl %eax, 0x1c /* adjust hidden_sectors for NTFS */ + + movb %dl, 0x24 /* adjust drive number for NTFS */ + +#if 1 + // Load NTFS using internal boot sector at 0xA00 + + movw $(NTFS5_message - _start1), %si + call print_message /* CS:SI points to message string */ + + movw $0xA00, %bx + movw $0x52, %cx + + pushw %cs + popw %ds + + /* DS=SS=0x9400 */ + /* ES=FS_BOOT */ + + movw %bx, %si + xorw %di, %di + lodsw + stosw + addw %cx, %si + addw %cx, %di + movw $0x800, %cx + subw %di, %cx + + repz movsb + + /* modify the boot partition number */ + movb %es:1, %al + addb $5, %al /* AL is less than 0x80 */ + cbw /* AH=0 */ + xchgw %ax, %di /* move AX to DI */ + movb $0xff, %al /* partition=whole drive for floppy */ + testb %dl, %dl + jns 3f /* no modification for floppy */ + movb 0x1bc, %al /* partition number */ +3: + stosb + + /* fix for NTFS partition: on error go back to supervisor, offset 0x01fa */ + + movw $0x01fa, %di + movw %es:(%di), %ax + cmpw $0xFEEB, %ax /* EB FE is jmp back to itself(infinite loop) */ + jnz 3f + decw %ax /* AL=0xEA, ljmp */ + stosb + //movw $(try_next_partition - _start1), %ax + movw $MONITOR, %ax + stosw + + //movw %cs, %ax /* AX=0x9400 */ + xorw %ax, %ax + stosw /* DI=0x01ff */ +3: + clc + jmp move_entries_and_return + +#else + + /* modify the boot partition number */ + movb $0xB6, %al /* 0xB6="MOV DH,imm8" */ + movb %cs:0x1bc, %ah + testb %dl, %dl + js 3f + movb $0xff, %ah /* partition number for floppy is whole drive */ +3: + /* before the call: + * AH= partition number + * AL= 0xB6 ; 0xB6 is opcode of "MOV DH,imm8" + * DL= drive number + * + * on return: CF=0 if there is NTFS boot record; + * CF=1 otherwise. + * CF of flags_orig on the stack will set if CF=1 + */ + + call modify_NTFS_boot_record + //jnc move_entries_and_return + //movw $(NTFS5_message - _start1), %si + ////jmp 4f + //call print_message /* CS:SI points to message string */ + //stc + jmp move_entries_and_return + +#endif + +2: + /* FAT12/FAT16 */ + movb 0x10(%si), %al /* number of FATs(NTFS:0, FAT:1,2) */ + testb %al, %al + jz 1f + movw 0x16(%si), %ax /* sectors per FAT(small) */ + testw %ax, %ax + jz 1f + movw $(FAT16_message - _start1), %si + cmpw $12, %ax + ja 7f + movw $(FAT12_message - _start1), %si +7: + /* BUG fix for extended FAT12/16/32 partition */ + popw %di /* DI points to old entry in MBR */ + pushw %di + xorl %eax, %eax /* let hidden_sectors=0 for floppy */ + testb %dl, %dl + jns 3f /* floppy */ + movl %cs:4(%di), %eax + addl %cs:8(%di), %eax +3: + movl %eax, 0x1c /* adjust hidden_sectors for FAT */ + + call print_message /* CS:SI points to message string */ + pushw %cs + popw %ds + /* DS=SS=0x9400 */ + /* ES=FS_BOOT */ + movw %bx, %si + xorw %di, %di + lodsw + stosw + addw %cx, %si + addw %cx, %di + movw $0x0200, %cx + subw %di, %cx + repz movsb + /* modify the boot partition number */ + movb %es:1, %al + addb $5, %al /* AL is less than 0x80 */ + cbw /* AH=0 */ + xchgw %ax, %di /* move AX to DI */ + movb $0xff, %al /* partition=whole drive for floppy */ + testb %dl, %dl + jns 3f /* no modification for floppy */ + movb 0x1bc, %al /* partition number */ +3: + stosb + + /* fix for FAT12/16/32 partition: on error go back to supervisor, offset 0x01fa */ + //pushw %es + //popw %ds + movw $0x01fa, %di + //movw %di, %si + //lodsw + movw %es:(%di), %ax + cmpw $0xFEEB, %ax /* EB FE is jmp back to itself(infinite loop) */ + jnz 3f + decw %ax /* AL=0xEA, ljmp */ + stosb + //movw $(try_next_partition - _start1), %ax + movw $MONITOR, %ax + stosw + //movw %cs, %ax /* AX=0x9400 */ + xorw %ax, %ax + stosw /* DI=0x01ff */ +3: + + clc + jmp move_entries_and_return +1: + #; It is not FAT12/16/32/NTFS. Check for extended partition. + + /* DS=ES=FS_BOOT */ + + pushw %cs + popw %es + + /* ES=SS=0x9400 */ + /* DS=FS_BOOT */ + + popw %si + pushw %si + cmpb $0x05, %es:(%si) /* extended */ + je 1f + cmpb $0x0f, %es:(%si) /* Win95 extended (LBA) */ + je 1f + cmpb $0x15, %es:(%si) /* hidden extended */ + je 1f + cmpb $0x1f, %es:(%si) /* hidden win95 extended (LBA) */ + je 1f + cmpb $0x85, %es:(%si) /* Linux extended */ + je 1f + movw $(non_MS_message - _start1), %si +4: + call print_message /* CS:SI points to message string */ + stc + jmp move_entries_and_return +1: + /* extended partition entry */ + cmpw $0x1fe, %si + jb 1f + decw %es:0x1bc /* count the partitions in extended zone */ +1: + movw $(extended_message - _start1), %si + call print_message /* CS:SI points to message string */ + movw $0x1be, %si + movw $4, %cx +5: + //xorl %eax, %eax + //cmpl %eax, (%si) + //jnz 2f + movl (%si), %eax + cmpw 2(%si), %ax /* Is EAX high word equal to AX? */ + jnz 2f + cmpb %al, %ah /* Is AL=AH? */ + jnz 2f + + /* now all 4 bytes in EAX are equal to each other. */ + cmpl %eax, 4(%si) + jnz 2f + cmpl %eax, 8(%si) + jnz 2f + cmpl %eax, 12(%si) + jz 3f /* entry with 16 dups of a byte means empty entry */ +2: + movb (%si), %al + shlb $1, %al + jnz 1f + //jnz 3f /* invalid entry is treated as empty entry */ + movb 2(%si), %al + and $63, %al /* starting sector number */ + jz 1f + //jz 3f /* invalid entry is treated as empty entry */ + movb 6(%si), %al + and $63, %al /* ending sector number */ + jz 1f + //jz 3f /* invalid entry is treated as empty entry */ + movl 8(%si), %eax /* starting LBA */ + testl %eax, %eax + jz 1f + //jz 3f /* invalid entry is treated as empty entry */ + movl 12(%si), %eax /* total number of sectors in partition */ + testl %eax, %eax + jz 1f +3: + addw $16, %si + loop 5b + cmpw $0xaa55, (%si) + jnz 1f + + movw $0x1be, %si + movw $4, %cx + popw %bx /* the old SI points to extended partition ID in MBR */ + pushw %bx +5: +#if 1 + //xorl %eax, %eax + //cmpl %eax, (%si) + //jnz 2f + movl (%si), %eax + cmpw 2(%si), %ax /* Is EAX high word equal to AX? */ + jnz 2f + cmpb %al, %ah /* Is AL=AH? */ + jnz 2f + + /* now all 4 bytes in EAX are equal to each other. */ + cmpl %eax, 4(%si) + jnz 2f + cmpl %eax, 8(%si) + jnz 2f + cmpl %eax, 12(%si) + jz 3f /* entry with 16 dups of a byte means empty entry */ +2: + /* now it is an acceptable entry */ + movw %es:0x1ba, %di /* partition entries end */ + /* ensure our stack not to be overwritten by the partition entries */ + cmpw $0x83f0, %di + ja 3f /* try next */ + /* ensure our code not to be overwritten by the partition entries */ + cmpw $0x3fe, %di + jne 6f + /* more entries stores at 0x9be00-0x9c3ff */ + movw $0x7e00, %di + movw %di, %es:0x1ba +6: + addw $16, %es:0x1ba /* increment partition entries end */ + + lodsl + stosl + lodsl + stosl + + xchgw %ax, %dx /* save AL(the partition ID)to DL */ + + lodsl + xchgl %eax, %edx /* restore AL from DL(the partition ID) + * and save EAX to EDX */ + cmpb $0x05, %al + je 6f + cmpb $0x0f, %al + je 6f + cmpb $0x15, %al + je 6f + cmpb $0x1f, %al + je 6f + cmpb $0x85, %al + je 6f + /* normal partition, copied to 0x941fe-0x943fb */ + addl %es:4(%bx), %edx /* current partition start */ +6: + /* extended partition, copied to 0x941fe-0x943fb */ + xchgl %eax, %edx /* restore or update EAX from EDX */ + stosl + lodsl /* adjust SI only */ + movl %es:8(%bx), %eax /* parent partition start ... */ + stosl /* ... stored here */ + jmp 2f +3: + addw $16, %si +#endif + //. = 5b + 0x7c +2: + loop 5b + + /* extended partition is not a normal one, so set carry to try next */ + stc + jmp move_entries_and_return + +invalid_or_null: +1: + movw $(invalid_message - _start1), %si + call print_message /* CS:SI points to message string */ + stc + +move_entries_and_return: + popw %si + pushfw + pushw %cs + popw %ds + pushw %cs + popw %es + pushw %si + cmpw $0x202, %si + jne 1f + /* move entries backward 1 entry */ + movw $0x1fe, %di + movw $0x20e, %si + movw $0xf8, %cx /* 0x1f0 bytes = 0xf8 words */ + cld /* move upward */ + repz movsw + movw $0x3ee, %di + movw $0x7e00, %si + movw $0x8, %cx /* 0x10 bytes = 0x8 words */ + cld /* move upward */ + repz movsw + movw $0x7e00, %di + movw $0x7e10, %si + movw $0x2f8, %cx /* 0x5f0 bytes = 0x2f8 words */ + cld /* move upward */ + repz movsw + cmpw $0x7e10, 0x1ba + jne 2f + movw $0x40e, 0x1ba +2: + subw $0x10, 0x1ba + +1: + popw %si + movw $0x1ff, (add_sub_si + 5 - _start1) + cmpw $0x1fe, 0x1ba + jne 1f + decw (add_sub_si + 5 - _start1) + cmpw $0x31b2, %si /* floppy? */ + je 1f /* yes */ + cmpw $0x1f2, %si + ja 2f /* logical partition */ + jb 1f /* primary partition 0, 1, 2 */ + /* primary partition 3 */ + cmpw $0x0003, 0x1bc /* are there any logical partitions? */ + ja 1f /* yes */ +2: +inc_hard_drive: + + /* all partitions on the drive have been checked, try next drive. + * + * the current stack is: + * + * SP + 38 : DS + * SP + 36 : ES + * SP + 32 : EAX + * SP + 28 : ECX + * SP + 24 : EDX + * SP + 20 : EBX + * SP + 16 : ESP_temp + * SP + 12 : EBP + * SP + 8 : ESI + * SP + 4 : EDI + * SP + 2 : flags_orig + * SP : flags + * + */ + + /* get total hard drives */ + xorw %ax, %ax + movw %ax, %ds + movb 0x475, %dh + pushw %cs + popw %ds +// cmpb $16, %dh +// jnb 2f +// movb $16, %dh +//2: + orb $0x80, %dh /* CF=0, DH=Max harddrive number + 1 */ + //xchgw %ax, %cx /* CL=Max harddrive number + 1, CH=0 */ + movw %sp, %bp + movb 24(%bp), %dl /* BIOS drive number is in DL */ +2: + jnc 3f + call print_message /* CS:SI points to message string */ + movw $(drive_number_string - _start1), %si + movb %dl, %al + andb $0x7f, %al + aam /* AH=high decimal, AL=low decimal */ + addw $0x3030, %ax + xchgb %al, %ah + movw %ax, 9(%si) + call print_message /* CS:SI points to message string */ +3: + incw %dx + cmpb %dh, %dl + jnb 2f /* all drives checked, try floppy finally */ + + pushw %bx + pushw %dx + pushw %es + movb $8, %ah /* read drive parameters changes DX, ES, DI */ + int $0x13 + popw %es + jc 3f /* try next hard drive */ + //xchgw %ax, %cx /* this moves CL to AL */ + andb $63, %cl /* CL=sectors per track, CF cleared */ + stc + jz 3f /* try next hard drive */ + popw %dx /* get DL */ + popw %bx + movb %dl, %ch /* DL saved at BP high byte in the stack */ + pushw %cx /* push new BX onto stack */ + pushw %dx + //movb $0x02, %ah + //movw %ax, %si /* save AX to SI: read 1 track */ + movw $0x201, %ax /* read 1 sector */ + movw $0x7e00, %bx /* read MBR to 9400:7e00 */ + movw $1, %cx + //popw %dx + //pushw %dx + xorb %dh, %dh + stc + int $0x13 + sti +3: + popw %dx + popw %bx /* BL=sectors per track, BH=DL */ + + //movw %si, %bx /* BL=sectors per track */ + + movw $(Error_while_reading_string - _start1), %si + jc 2b /* read failure, try next hard drive */ + + /* on seccessful return, should be: ah=0 for OK, al=1 for 1 sector */ + //decw %ax /* some BIOSes return incorrect AL */ + testb %ah, %ah + stc + jnz 2b + + /* The new partition table might be empty or invalid. + * Move the new partition table onto the old one while checking + */ + + //movb %dl, %bh /* DL saved at BP high byte in the stack */ + + movw $0x7fbe, %si + movw $0x01be, %di + +3: + cmpw $0x1fe, %di + jnb 3f + + xorl %ecx, %ecx + + lodsl + stosl + orl %eax, %ecx + lodsl + stosl + orl %eax, %ecx + lodsl + stosl + orl %eax, %ecx + lodsl + stosl + orl %eax, %ecx + jecxz 3b /* null entry, check next */ + + //lodsw + //stosw + movb -16(%si), %al + shlb $1, %al + stc + xchgw %ax, %si /* save SI to AX */ + movw $(partition_boot_indicator_string - _start1), %si + jnz 2b + xchgw %ax, %si /* restore SI from AX */ + //lodsw + //stosw + movb -14(%si), %al + andb $63, %al + stc + xchgw %ax, %si /* save SI to AX */ + movw $(partition_sectors_per_track_string - _start1), %si + jz 2b + xchgw %ax, %si /* restore SI from AX */ + //lodsw + //stosw + //lodsw + //stosw + movb -10(%si), %al + andb $63, %al + stc + xchgw %ax, %si /* save SI to AX */ + movw $(partition_sectors_per_track_string - _start1), %si + jz 2b + xchgw %ax, %si /* restore SI from AX */ + //lodsl + //stosl + movl -8(%si), %eax + testl %eax, %eax + stc + xchgw %ax, %si /* save SI to AX */ + movw $(partition_start_sector_string - _start1), %si + jz 2b + xchgw %ax, %si /* restore SI from AX */ + + //lodsl + //stosl + movl -4(%si), %eax + testl %eax, %eax + stc + xchgw %ax, %si /* save SI to AX */ + movw $(partition_end_sector_string - _start1), %si + jz 2b + xchgw %ax, %si /* restore SI from AX */ + + jmp 3b +3: + cmpw $0xAA55, (%si) + stc + xchgw %ax, %si /* save SI to AX */ + movw $(no_boot_signature_string - _start1), %si + jnz 2b + xchgw %ax, %si /* restore SI from AX */ + //lodsw + //stosw /* store boot signature */ + + /* Now the partition table is OK */ + + movw %bx, 12(%bp) /* adjust BP in the stack */ + + movw $0x1b2, 8(%bp) /* adjust SI in the stack */ + + /* temp change the code: call self_modify_once + * + * "call self_modify_once" at add_sub_si is: + * + * .byte 0xE8 + * .word (self_modify_once - add_sub_si - 3) + * + */ + movb $0xE8, (add_sub_si - _start1) + movw $(self_modify_once - add_sub_si - 3), (add_sub_si + 1 - _start1) + + /* initialize partition number and partition entries end */ + movw $0xffff, 0x1bc /* hd partition number */ + movw $0x01fe, 0x1ba /* partition entries end */ + + jmp 1f +2: + /* get here if all drives have been checked */ +#if 0 + movw $0x202, 8(%bp) /* adjust SI in the stack */ + + /* restore the original code: addw $-4, %si */ + movw $0xC683, (add_sub_si - _start1) /* 0x83, 0xC6 */ + movb $0xFC, (add_sub_si + 2 - _start1) /* 0xFC */ +#endif + //-------------------------------------------------------------------- + /* change the code: jmp Error_modify + * + * "jmp Error_modify" at Error_or_prev_MBR: + * + * .byte 0xE9 + * .word (Error_modify - Error_or_prev_MBR - 3) + * + */ + movb $0xE9, (Error_or_prev_MBR - _start1) + movw $(Error_modify - Error_or_prev_MBR - 3), (Error_or_prev_MBR + 1 - _start1) + //-------------------------------------------------------------------- + + //-------------------------------------------------------------------- + /* floppy search disabled ? */ +#if 0 + testb $1, 0x02 /* test bit0 of the third byte */ + jz 1f /* zero means floppy search enabled */ + /* 0x1fd or below means disable floppy search */ + decw (add_sub_si + 5 - _start1) +#else + movb 0x02, %al + andb $0x01, %al + subb %al, (add_sub_si + 5 - _start1) +#endif + //-------------------------------------------------------------------- + +1: +#if 0 + popfw + lahf /* Load Flags into AH Register. */ + /* AH = SF:ZF:xx:AF:xx:PF:xx:CF */ + /* CF will be moved to ZF */ + movb %ah, %al + andb $1, %al /* CF=0 */ + shlb $6, %al /* move CF to ZF */ + popfw + lahf /* Load Flags into AH Register. */ + /* AH = SF:ZF:xx:AF:xx:PF:xx:CF */ + andb $0xbf, %ah /* 0xbf= binary 1011 1111. It clears ZF */ + orb %al, %ah +#else + popw %ax /* AX=Flags */ + popfw /* Flags_orig */ + lahf /* Load Flags_orig into AH Register. */ + /* AH = SF:ZF:xx:AF:xx:PF:xx:CF */ + shlb $2, %ah + rorw $2, %ax /* move CF of Flags to ZF of Flags_orig */ +#endif + + sahf /* update flags */ + /* current CF is the CF of Flags_orig */ + /* current ZF is the CF of Flags */ + jc 1f /* CF=1 means failed in loading bootsector */ + popal /* get drive number DL */ + pushal + pushfw + cmpb $0xff, %cs:0x06 + jz 2f + movb %cs:0x1bc, %dh + testb %dl, %dl + js 3f + movb $0xff, %dh /* partition # for floppy is "whole drive" */ +3: + cmpw %cs:0x06, %dx + jz 2f + popfw + stc + pushfw +2: + popfw +1: + popal + popw %es + popw %ds + ret + +self_modify_once: + /* when we get here, SI should be 0x1b2, and BP high holds DL */ + addw $12, %si /* 0x83, 0xC6, 0x0C */ + movw %bp, %ax + movb %ah, %dl + + /* note: DS=0x9400 */ + + /* restore the original code: addw $12, %si */ + movw $0xC683, (add_sub_si - _start1) /* 0x83, 0xC6 */ + movb $0x0C, (add_sub_si + 2 - _start1) /* 0x0C */ + ret + +Error_modify: + cmpb $0xff, %cs:0x06 /* preferred drive? */ + jz 1f /* not active. Turn to the final step. */ + + /* preferred drive is already handled, so de-activate it now. */ + movb $0xff, %cs:0x06 + + /* we will do the second pass, from drive 0x80. */ + movb $0x7f, %dl /* this will become 0x80 after inc. */ + + /* pass "error" to PUSHF, simulating a load failure, in order + * to try the first entry after return from the helper function. + */ + + stc + + pushw $(helper_call + 3 - _start1) /* return address */ + pushw %cs /* 0x9400, it is for DS. */ + pushw $FS_BOOT /* 0x0d00, it is for ES. */ + pushal + //pushl %eax + //pushl %ecx + //pushl %edx + //pushl %ebx + //pushl %esp + //pushl %ebp + //pushl %esi + //pushl %edi + pushfw /* CF=1 */ + pushfw + + pushw %cs + popw %es /* ES=0x9400 */ + + /* redo from start: DL will be 0x80 after inc. */ + jmp inc_hard_drive +1: +boot_prev_mbr: + + /* prepare to boot the previous MBR */ + + /* at this moment DS=0x9400, ES=$FS_BOOT or ES=0x9400 */ + xorw %ax, %ax + //pushw %ax /* AX=0, for the segment of 0000:7c00 */ + movw %ax, %es /* ES=0x0000 */ + movw %ax, %ds /* DS=0x0000 */ + pushw %ds + pushw %es + movw $0x0202, %ax /* read 2 sectors ... */ + movw $0x7A00, %bx /* ... to 0000:7A00 */ + //pushw %bx /* BX=0x7c00, for the offset of 0000:7c00 */ + movw $0x0001, %cx /* from the first sector ... */ + movw $0x0080, %dx /* ... of the first hard drive */ + stc + int $0x13 + sti + popw %es + popw %ds + jc 1f + testb %ah, %ah + jnz 1f + cmpw $0xAA55, 0x7dfe + jne 1f + cmpw $0xAA55, 0x7bfe + jne 1f + + /* has a valid partition table ? */ + movw $0x7dbe, %si +3: + cmpw $0x7dfe, %si + jnb 3f /* partition table is OK */ + movw $4, %cx + + movw %si, %di +2: + lodsl + negl %eax + jc 2f + loop 2b + /* empty entry, check next */ + jmp 3b +2: + /* non-empty entry */ + movw %di, %si + + lodsw + shlb $1, %al + jnz 2f + lodsw + andb $63, %al + jz 2f + lodsw + lodsw + andb $63, %al + jz 2f + lodsl + negl %eax + jnc 2f + lodsl + negl %eax + jc 3b +2: + stc /* invalid partition table */ +3: + pushfw + + /* disable the boot of non-MBR bootsector ? */ + testb $2, %cs:0x02 /* test bit1 of the third byte */ + jz 2f /* zero means non-MBR enabled */ + popfw + jc 1f /* invalid partition table, print "Error" */ + + /* the partition table is valid */ + pushfw + +2: + /* the check passed, and the boot is permitted */ + popfw + + jc 2f /* invalid partition table */ + + /* use partition table in MBR instead */ + + /* copy 72 bytes at 0000:7bb8 to 0000:7db8 */ + + movw $0x7bb8, %si + movw $0x7db8, %di + movw $36, %cx + cld + repz movsw + +2: + testb $0x80, %cs:0x02 /* test bit 7 of the third byte */ + jz 2f /* zero means boot prev-MBR first */ + + movw $(Cannot_find_GRLDR_string - _start1), %si + call print_message /* CS:SI points to message string */ +//#if (! defined(GRLDR_MBR)) && (! defined(GRLDR_INSTALL)) + movw $(press_space_bar_string - _start1), %si + cmpw $0x3920, %cs:0x04 + je 3f + movw $0x3920, %cs:0x04 + #;movw $(press_hot_key_string - _start1), %si +3: + call print_message /* CS:SI points to message string */ + movw $(prev_MBR_string - _start1), %si + call print_message /* CS:SI points to message string */ +//#else +// movw $(press_hot_key_pre - _start1), %si +// call print_message +// movw $(press_hot_key_name - _start1), %si +// call print_message +// movw $(press_hot_key_sub - _start1), %si +// call print_message +//#endif +3: + call sleep_5_seconds + /* if hot-key is pressed, wait forever until another key is pressed. */ + movb $0xff, %cs:0x03 + jc 3b /* desired hot-key is pressed */ +2: + /* boot the previous MBR */ + + /* clear the DUCE indicator */ + movl $0, 0x5FC /* DS=ES=0 */ + + //movb $0x80, %dl + ljmp $0, $0x7c00 +1: + /* no previous MBR, print "Error" */ + ///* Note the 0000:7C00 is on the stack */ + //popw %ax /* AX=0x0000 */ + //popw %ax /* AX=0x7C00 */ + + testb $0x80, %cs:0x02 /* are we called prior to the GRLDR search? */ + jnz 1f /* no, it is a failure at last */ + /* yes, so return to the caller */ + movw $(continue_string - _start1), %si + call print_message /* CS:SI points to message string */ + call sleep_5_seconds + ret +1: + movw $(message_string_helper - _start1), %si + call print_message /* CS:SI points to message string */ +1: jmp 1b /* hang */ + +sleep_5_seconds: + /* sleep 5 seconds */ + + /* sleep forever if %cs:0x03 is 0xff */ + + /* calculate the timeout ticks */ + + pushw %ds + pushl %esi + pushl %edx + + movl $0xffffffff, %edx + movzbl %cs:0x03, %eax + cmpb $0xff, %al + je 1f + movl $18, %edx /* 18.2 ticks per second. We simply use 18. */ + mulw %dx /* EDX=0, EAX=ticks */ + xchgw %ax, %dx /* EAX=0, EDX=ticks */ +1: + xorw %ax, %ax + movw %ax, %ds + movl 0x46c, %eax /* initial tick */ + movl %eax, %ecx /* ECX=initial tick */ + testl %edx, %edx + js 1f + addl %edx, %eax /* EAX=timeout tick */ + pushl %eax + + movzbl %cs:0x03, %eax + orl %eax, %eax + jz 3f + + movw $(hot_key_timeout_pre - _start1), %si + pushl %eax + call print_message + popl %eax + + movw $(hot_key_timeout_num - _start1), %si + call print_decimal +3: + movl %ecx, %esi + addl $18, %esi + + popl %eax + jmp 3f +1: + movl %edx, %eax /* EAX=0xffffffff */ + movl %edx, %esi +3: + movl 0x46c, %ebx /* EBX=current tick */ + cmpl %ecx, %ebx + jnb 2f + + /* current tick is less than initial tick, this means the ticks have + * overflowed to the next day, and EBX is rather small. */ + xorl %ecx, %ecx + movl %edx, %eax + movl $18, %esi +2: + /* check if there is any key press. */ + pushl %eax + movb $1, %ah + int $0x16 + pushw %ax + pushfw + + movb $0x11, %ah + int $0x16 + jnz 1f + popfw + jnz 2f + + /* no, there is no key press. */ + + popw %ax + popl %eax + + cmpl %esi, %ebx + jb 4f + pushl %esi + pushl %eax + pushl %edx + + + subl %esi, %eax + xorl %edx, %edx + movl $18, %esi + divl %esi + + movw $(hot_key_timeout_num - _start1), %si + pushl %ebx + call print_decimal + popl %ebx + + popl %edx + popl %eax + popl %esi + addl $18, %esi +4: + cmpl %eax, %ebx /* timeout? */ + jbe 3b /* no, continue to wait */ + + /* timeout reached, CF=0, no key pressed. */ + popl %edx + popl %esi + popw %ds + ret +1: + popfw +2: + /* yes, there is a key press. */ +#if 0 + /* clear the keyboard buffer */ + movb $1, %ah + int $0x16 + jz 1f /* no keys, end */ + movb $0, %ah + int $0x16 /* discard the key */ + jmp 1b +1: +#endif + + /* check if it is the desired key. */ + + xorw %cs:0x04, %ax /* CF=0 */ + popw %ax + je 1f + xorw %cs:0x04, %ax /* CF=0 */ + jne 2f /* not desired, return CF=0 */ + + /* remove the desired key from the keyboard buffer. */ + + movb $0, %ah + int $0x16 /* discard the key */ + jmp 3f +1: + /* remove the desired key from the keyboard buffer. */ + + movb $0x10, %ah + int $0x16 /* discard the key */ +3: + stc /* CF=1, the desired key pressed */ +2: + popl %eax + popl %edx + popl %esi + popw %ds + ret + +out_decimal: + /* + * input: EAX = number, CS:SI = buffer + */ + + pushl %edx + pushl %ecx + pushw %bx + + movl $10, %ecx + movw %si, %bx + +1: + xorl %edx, %edx + divl %ecx + addb $'0', %dl + movb %dl, %cs:(%si) + incw %si + orl %eax, %eax + jnz 1b + + pushw %si + +1: + decw %si + cmpw %bx, %si + jbe 1f + movb %cs:(%si), %al + xchgb %al, %cs:(%bx) + movb %al, %cs:(%si) + incw %bx + jmp 1b +1: + + popw %si + + popw %bx + popl %ecx + popl %edx + ret + +print_decimal: + pushw %si + call out_decimal + +1: + cmpb $'\b', %cs:(%si) + jz 2f + movb $' ', %cs:(%si) + incw %si + jmp 1b +2: + popw %si + call print_message + ret + +#if 0 +modify_NTFS_boot_record: + + /* before the call: + * AH= partition number + * AL= 0xB6 ; 0xB6 is opcode of "MOV DH,imm8" + * DL= drive number + * + * on return: CF=0 if there is NTFS boot record; + * CF=1 otherwise. + * CF of flags_orig on the stack will set if CF=1 + */ + + /* + * + * the current stack is: + * + * SP + 40 : DS + * SP + 38 : ES + * SP + 34 : EAX + * SP + 30 : ECX + * SP + 26 : EDX + * SP + 22 : EBX + * SP + 18 : ESP_temp + * SP + 14 : EBP + * SP + 10 : ESI + * SP + 6 : EDI + * SP + 4 : flags_orig + * SP + 2 : SI ; SI points to old entry in MBR + * SP : return_IP + * + */ + + /* DS=ES=FS_BOOT */ + + /* change NTLDR to GRLDR */ + + /* check GR or NT or anything else */ + + pushw %ax + + movw $0x200, %si + lodsw + cmpw $5, %ax + jne 1f /* failure */ + lodsw + testb %ah, %ah /* high byte of unicode ASCII should be 0 */ + jne 1f /* failure */ + + /* 'N' should be a capital letter */ + + cmpb $0x41, %al /* Less than 'A' */ + jb 1f /* failure */ + cmpb $0x5A, %al /* Greater than 'Z'*/ + ja 1f /* failure */ + + xchgw %ax, %cx /* save AX to CX. CL='N' */ + + lodsw + testb %ah, %ah /* high byte of unicode ASCII should be 0 */ + jne 1f /* failure */ + + /* 'T' should be a capital letter */ + + cmpb $0x41, %al /* Less than 'A' */ + jb 1f /* failure */ + cmpb $0x5A, %al /* Greater than 'Z'*/ + ja 1f /* failure */ + + movb %al, %ch /* save AL to CH. CH='T' */ + + lodsw + cmpw $0x4C, %ax /* 'L' */ + jne 1f /* failure */ + lodsw + cmpw $0x44, %ax /* 'D' */ + jne 1f /* failure */ + lodsw + cmpw $0x52, %ax /* 'R' */ + jne 1f /* failure */ + lodsw + cmpw $0x04, %ax /* length of "$I30" */ + jne 1f /* failure */ + lodsw + cmpw $0x24, %ax /* '$' */ + jne 1f /* failure */ + lodsw + cmpw $0x49, %ax /* 'I' */ + jne 1f /* failure */ + lodsw + cmpw $0x33, %ax /* '3' */ + jne 1f /* failure */ + lodsw + cmpw $0x30, %ax /* '0' */ + jne 1f /* failure */ + + + /* assume it is NT bootsector. first, find "NTLDR". CX holds "NT" */ + movw $0x0100, %di + movb %cl, %al /* AL="N" */ + movb $1, %ah /* AH=Carry for SAHF below */ + movl $0x52444c00, %ebx /* "LDR" */ + movb %ch, %bl /* 'T' */ + movw $0x00fa, %cx + + /* now AL holds 'N' and BL holds 'T' */ + + //cld /* already upward */ +3: + repnz scasb /* find "N" */ + jcxz 4f /* gets the end, exit */ + cmpl %ebx, (%di) /* is it "NTLDR"? */ + jnz 3b /* no, continue to find */ + + /* "NTLDR" is found, so we believe it is NT boot sector. */ + + movw $0x5247, -1(%di) /* change "NT" to "GR" */ + + /* CF=0 for now */ + + lahf /* Load Flags into AH */ + /* AH = SF:ZF:xx:AF:xx:PF:xx:CF */ + /* AH = binary xxxxxxx0 */ + jmp 3b +4: + sahf /* Store AH into flags SF ZF xx AF xx PF xx CF */ + + /* CF=0 means "NTLDR" is found, CF=1 means "NTLDR" is not found. */ + + jc 1f /* failure */ + + movl $0x00520047, 0x202 /* change to "G R L D R" */ + + /* check NT 4.0 */ + + movw $0x406, %si + movl (%si), %ebx /* NT 4.0 */ + cmpl $0x03E8B800, %ebx /* MOV AX, 03E8 */ + jnz 3f + + movl 0x84, %ebx + cmpl $0x680007E8, %ebx /* call 008e; push (0D00) */ + jnz 3f + +// movw 0x154, %bx /* CR LF at end of "A disk read error occurred." */ +// cmpw $0x0A0D, %bx /* CR LF */ +// jnz 3f +// movw 0x180, %bx /* CR LF at end of "A kernel file is missing from the disk." */ +// cmpw $0x0A0D, %bx /* CR LF */ +// jnz 3f +// movw 0x1A8, %bx /* CR LF at end of "A kernel file is too discontiguous." */ +// cmpw $0x0A0D, %bx /* CR LF */ +// jnz 3f +// movw 0x1F8, %bx /* CR LF at end of "NTLDR is compressed." */ +// cmpw $0x0A0D, %bx /* CR LF */ +// jnz 3f + + movl 0xE8, %ebx + cmpl $0x13CD80B2, %ebx /* "B2 80"="mov DL, 80", "CD 13"="int 13" */ + jnz 3f + + popw %ax + movw %ax, 4(%si) + + movl $0x68909090, %ebx /* nop;nop;nop;push (0D00) */ + movl %ebx, 0x84 + +// /* change CRLF in NTFS error messages to spaces */ +// movw $0x2020, %bx /* change CRLF to 2 spaces */ +// movw %bx, 0x154 +// movw %bx, 0x180 +// movw %bx, 0x1A8 +// movw %bx, 0x1F8 + + movb %dl, 0xE9 /* modify drive number */ + + /* modify NTFS boot record */ + movb $0xea, %al /* ljmp, hand over the control to supervisor */ + movb %al, 0x122 + //movw $(try_next_partition - _start1), %ax /* offset for ljmp */ + movw $MONITOR, %ax /* offset for ljmp */ + movw %ax, 0x123 + //movw %cs, %ax /* AX=0x9400, segment for ljmp */ + xorw %ax, %ax + movw %ax, 0x125 + + movw $(NTFS4_message - _start1), %si + call print_message /* CS:SI points to message string */ + clc + ret +3: + /* check NT 5.0 */ + + movw $0x44b, %si + movl (%si), %ebx /* NT 5.0 */ + cmpl $0x03E8B800, %ebx /* MOV AX, 03E8 */ + jz 2f + + movw $0x479, %si + movl (%si), %ebx /* NT 5.1 SP2 */ + cmpl $0x03E8B800, %ebx /* MOV AX, 03E8 */ + jnz 1f +2: + movl 0x71, %ebx + cmpl $0x680053E8, %ebx /* call 00C7; push (0D00) */ + jnz 1f + + //movw 0x183, %bx /* CR LF at begin of "A disk read error occurred." */ + movb 0x1F8, %bl + movb $1, %bh + movw (%bx), %bx + cmpw $0x0A0D, %bx /* CR LF */ + jnz 1f + //movw 0x1A0, %bx /* CR LF at begin of "NTLDR is missing." */ + movb 0x1F9, %bl + movb $1, %bh + movw (%bx), %bx + cmpw $0x0A0D, %bx /* CR LF */ + jnz 1f + //movw 0x1B3, %bx /* CR LF at begin of "NTLDR is compressed." */ + movb 0x1FA, %bl + movb $1, %bh + movw (%bx), %bx + cmpw $0x0A0D, %bx /* CR LF */ + jnz 1f + + popw %ax + movw %ax, 4(%si) + + movl $0x68909090, %ebx /* nop;nop;nop;push (0D00) */ + movl %ebx, 0x71 + + /* change CRLF in NTFS error messages to spaces */ + movw $0x2020, %ax + movb 0x1F8, %bl + movb $1, %bh + movw %ax, (%bx) // 0x183 + movb 0x1F9, %bl + movb $1, %bh + movw %ax, (%bx) // 0x1A0 + movb 0x1FA, %bl + movb $1, %bh + movw %ax, (%bx) // 0x1B3 + + /* modify NTFS boot record */ + movb $0xEA, %al /* ljmp, hand over the control to supervisor */ + movb %al, 0x167 + //movw $(try_next_partition - _start1), %ax /* offset for ljmp */ + movw $MONITOR, %ax /* offset for ljmp */ + movw %ax, 0x168 + //movw %cs, %ax /* AX=0x9400, segment for ljmp */ + xorw %ax, %ax + movw %ax, 0x16A + + cmpw $0x44b, %si + jne 2f + movw $(NTFS5_message - _start1), %si + jmp 3f +2: + movw $(NTFS5p_message - _start1), %si +3: + call print_message /* CS:SI points to message string */ + clc + ret +1: + /* NTFS boot record not found. */ + + movw $(NTFS_no_boot_record_message - _start1), %si + call print_message /* CS:SI points to message string */ + + popw %ax + popl %eax /* return_IP and SI */ + popfw + stc + pushfw + pushl %eax /* return_IP and SI */ + ret +#endif + +//#if (! defined(GRLDR_MBR)) && (! defined(GRLDR_INSTALL)) +move_helper: + + /* called only once and only when the boot loader loaded this code */ + pushw %si + pushw %bx + pushl %eax + + movw $0x0003, %ax /* set display mode: 80*25 color text */ + int $0x10 + + movw $0x200, %si + movw %si, %di + movw $0xf00, %cx + cld + repz movsw + + popl %eax + popw %bx + popw %si + ret +//#endif + +#if (defined(GRLDR_MBR)) || (defined(GRLDR_INSTALL)) +filesystem_boot: + /* The partition boot record successfully modified, just boot it */ + + /* + * The boot might fail, but we want to take back the control. + * So we save the registers now. + */ + pushw %ds + pushw %es + pushal + + /* DS=CS=GRLDR_CS, ES=FS_BOOT */ + + /* save GRLDR_CS */ + + movw %es, %bx # save old ES to BX + + cli + lgdt gdt - _start1 + movl %cr0, %eax + orb $1, %al + movl %eax, %cr0 + + movw $8, %si + movw %si, %es + + xorl %esi, %esi + xorl %edi, %edi + movl $(0x9000 / 4), %ecx + + cld + repz movsl + + movw $16, %si + movw %si, %es + + andb $0xfe, %al + movl %eax, %cr0 + + movw %bx, %es # restore ES from BX + + /* move FS_BOOT:0000 to 0:7c00 */ +#if 0 + /* for single sector boot record */ + movw $0x0200, %cx /* move 2 sectors, the old FS_BOOT:0000 will + * keep untouched. */ +#else + /* for 4-sector NTFS boot record */ + movw $0x0400, %cx /* move 4 sectors, the old FS_BOOT:0000 will + * keep untouched. */ +#endif + xorw %si, %si + pushw %si /* SI=0, for the segment of 0000:7c00 */ + movw $0x7c00, %di + pushw %di /* DI=0x7c00, for the offset of 0000:7c00 */ + pushw %es /* ES=FS_BOOT */ + popw %ds /* DS=FS_BOOT */ + pushw %si /* SI=0 */ + popw %es /* ES=0 */ + cld + repz movsw + + movw $MONITOR, %di + movw $(restore_GRLDR_CS - _start1), %si + movw $((gdt_end - restore_GRLDR_CS) / 4), %cx + cld + repz cs movsl /* CS segment override prefix(=0x2E) */ + + pushw %es /* ES=0 */ + popw %ds /* DS=0 */ + sti + lret //ljmp $0, $0x7c00 +#endif + +press_space_bar_string: + .ascii "\r\nPress space bar\0" + +press_hot_key_pre: + .ascii "\r\nPress \0" + +press_hot_key_sub: + .ascii " to start GRUB, any other key to boot previous MBR ...\0" + +hot_key_timeout_pre: + .ascii "\r\nTimeout : \0" + +hot_key_timeout_num: + .ascii " \b\b\b\0" + +continue_string: + .ascii "\r\nInvalid previous MBR. Press any key to start GRUB ...\0" + +Cannot_find_GRLDR_string: + .ascii "\r\nCannot find GRLDR.\0" + +prev_MBR_string: + .ascii " to hold the screen, any other key to boot previous MBR ...\0" + +Error_while_reading_string: + .ascii "\r\nError while reading MBR of \0" + +drive_number_string: + .ascii "drive (hd0 ) \0" + +partition_boot_indicator_string: + .ascii "\r\nInvalid boot indicator in partition table of \0" + +partition_sectors_per_track_string: + .ascii "\r\nInvalid sectors_per_track in partition table of \0" + +partition_start_sector_string: + .ascii "\r\nInvalid start_sector in partition table of \0" + +partition_end_sector_string: + .ascii "\r\nInvalid end_sector in partition table of \0" + +no_boot_signature_string: + .ascii "\r\nNo boot signature in partition table of \0" + +message_string_helper: + .ascii "\r\nError: Cannot find GRLDR in all devices. Press Ctrl+Alt+Del to restart.\0" + +partition_message: + .ascii "\r\nTry (hd0,0 ) : \0" + +EXT2_message: + .ascii "EXT2: \0" +NTFS4_message: + .ascii "NTFS4: \0" +NTFS5_message: + .ascii "NTFS5: \0" +NTFS5p_message: + .ascii "NTFS5p: \0" +FAT32_message: + .ascii "FAT32: \0" +FAT16_message: + .ascii "FAT16: \0" +FAT12_message: + .ascii "FAT12: \0" +non_MS_message: + .ascii "non-MS: skip \0" +extended_message: + .ascii "Extended: \0" +invalid_message: + .ascii "invalid or null \0" +#if 0 +NTFS_no_boot_record_message: + .ascii "This partition is NTFS but with unknown boot record. Please\r\ninstall Microsoft NTFS boot sectors to this partition correctly, or create an\r\nFAT12/16/32 partition and place the same copy of GRLDR and MENU.LST there.\0" +#endif + +#if (! defined(GRLDR_MBR)) && (! defined(GRLDR_INSTALL)) + . = _start1 + 0x1ffa +#else + . = . + (0x3ec - ((. - _start1) % 0x200)) % 0x200 + +press_hot_key_name: + + /* hot key name, the address is (grldr_signature - 16) */ + + .ascii "hot-key\0" + + . = press_hot_key_name + 14 + + //. = . + (0x3fa - ((. - _start1) % 0x200)) % 0x200 +#endif + + /* version word of grldr.mbr, the address is (grldr_signature - 2) */ + + .word 2 + +grldr_signature: + .byte 0x47, 0x52, 0x55, 0xaa /* signature for helper */ + + .align 0x200 + +#if (! defined(GRLDR_MBR)) && (! defined(GRLDR_INSTALL)) + + /* pre_stage2 start at 0x2000 for grldr */ + + . = _start1 + 0x2000 + +#endif + +#if defined(GRLDR_MBR) + /* if the size is less than 8192, let it be 8192 */ + . = . + (0x2000 - (. - _start1)) * (0x4000 / (. - _start1 + 0x2001)) +#endif + +pre_stage2_start: + + -- cgit v1.2.3