/* * Copyright (c) 2004-2008 Reyk Floeter * Copyright (c) 2006-2008 Nick Kossifidis * Copyright (c) 2007-2008 Matthew W. S. Bell * Copyright (c) 2007-2008 Luis Rodriguez * Copyright (c) 2007-2008 Pavel Roskin * Copyright (c) 2007-2008 Jiri Slaby * * Lightly modified for gPXE, July 2009, by Joshua Oreman . * * Permission to use, copy, modify, and distribute this software for any * purpose with or without fee is hereby granted, provided that the above * copyright notice and this permission notice appear in all copies. * * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. * */ FILE_LICENCE ( MIT ); /*********************************\ * Protocol Control Unit Functions * \*********************************/ #include "ath5k.h" #include "reg.h" #include "base.h" /*******************\ * Generic functions * \*******************/ /** * ath5k_hw_set_opmode - Set PCU operating mode * * @ah: The &struct ath5k_hw * * Initialize PCU for the various operating modes (AP/STA etc) * * For gPXE we always assume STA mode. */ int ath5k_hw_set_opmode(struct ath5k_hw *ah) { u32 pcu_reg, beacon_reg, low_id, high_id; /* Preserve rest settings */ pcu_reg = ath5k_hw_reg_read(ah, AR5K_STA_ID1) & 0xffff0000; pcu_reg &= ~(AR5K_STA_ID1_ADHOC | AR5K_STA_ID1_AP | AR5K_STA_ID1_KEYSRCH_MODE | (ah->ah_version == AR5K_AR5210 ? (AR5K_STA_ID1_PWR_SV | AR5K_STA_ID1_NO_PSPOLL) : 0)); beacon_reg = 0; pcu_reg |= AR5K_STA_ID1_KEYSRCH_MODE | (ah->ah_version == AR5K_AR5210 ? AR5K_STA_ID1_PWR_SV : 0); /* * Set PCU registers */ low_id = AR5K_LOW_ID(ah->ah_sta_id); high_id = AR5K_HIGH_ID(ah->ah_sta_id); ath5k_hw_reg_write(ah, low_id, AR5K_STA_ID0); ath5k_hw_reg_write(ah, pcu_reg | high_id, AR5K_STA_ID1); /* * Set Beacon Control Register on 5210 */ if (ah->ah_version == AR5K_AR5210) ath5k_hw_reg_write(ah, beacon_reg, AR5K_BCR); return 0; } /** * ath5k_hw_set_ack_bitrate - set bitrate for ACKs * * @ah: The &struct ath5k_hw * @high: Flag to determine if we want to use high transmition rate * for ACKs or not * * If high flag is set, we tell hw to use a set of control rates based on * the current transmition rate (check out control_rates array inside reset.c). * If not hw just uses the lowest rate available for the current modulation * scheme being used (1Mbit for CCK and 6Mbits for OFDM). */ void ath5k_hw_set_ack_bitrate_high(struct ath5k_hw *ah, int high) { if (ah->ah_version != AR5K_AR5212) return; else { u32 val = AR5K_STA_ID1_BASE_RATE_11B | AR5K_STA_ID1_ACKCTS_6MB; if (high) AR5K_REG_ENABLE_BITS(ah, AR5K_STA_ID1, val); else AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1, val); } } /******************\ * ACK/CTS Timeouts * \******************/ /** * ath5k_hw_het_ack_timeout - Get ACK timeout from PCU in usec * * @ah: The &struct ath5k_hw */ unsigned int ath5k_hw_get_ack_timeout(struct ath5k_hw *ah) { return ath5k_hw_clocktoh(AR5K_REG_MS(ath5k_hw_reg_read(ah, AR5K_TIME_OUT), AR5K_TIME_OUT_ACK), ah->ah_turbo); } /** * ath5k_hw_set_ack_timeout - Set ACK timeout on PCU * * @ah: The &struct ath5k_hw * @timeout: Timeout in usec */ int ath5k_hw_set_ack_timeout(struct ath5k_hw *ah, unsigned int timeout) { if (ath5k_hw_clocktoh(AR5K_REG_MS(0xffffffff, AR5K_TIME_OUT_ACK), ah->ah_turbo) <= timeout) return -EINVAL; AR5K_REG_WRITE_BITS(ah, AR5K_TIME_OUT, AR5K_TIME_OUT_ACK, ath5k_hw_htoclock(timeout, ah->ah_turbo)); return 0; } /** * ath5k_hw_get_cts_timeout - Get CTS timeout from PCU in usec * * @ah: The &struct ath5k_hw */ unsigned int ath5k_hw_get_cts_timeout(struct ath5k_hw *ah) { return ath5k_hw_clocktoh(AR5K_REG_MS(ath5k_hw_reg_read(ah, AR5K_TIME_OUT), AR5K_TIME_OUT_CTS), ah->ah_turbo); } /** * ath5k_hw_set_cts_timeout - Set CTS timeout on PCU * * @ah: The &struct ath5k_hw * @timeout: Timeout in usec */ int ath5k_hw_set_cts_timeout(struct ath5k_hw *ah, unsigned int timeout) { if (ath5k_hw_clocktoh(AR5K_REG_MS(0xffffffff, AR5K_TIME_OUT_CTS), ah->ah_turbo) <= timeout) return -EINVAL; AR5K_REG_WRITE_BITS(ah, AR5K_TIME_OUT, AR5K_TIME_OUT_CTS, ath5k_hw_htoclock(timeout, ah->ah_turbo)); return 0; } /****************\ * BSSID handling * \****************/ /** * ath5k_hw_get_lladdr - Get station id * * @ah: The &struct ath5k_hw * @mac: The card's mac address * * Initialize ah->ah_sta_id using the mac address provided * (just a memcpy). * * TODO: Remove it once we merge ath5k_softc and ath5k_hw */ void ath5k_hw_get_lladdr(struct ath5k_hw *ah, u8 *mac) { memcpy(mac, ah->ah_sta_id, ETH_ALEN); } /** * ath5k_hw_set_lladdr - Set station id * * @ah: The &struct ath5k_hw * @mac: The card's mac address * * Set station id on hw using the provided mac address */ int ath5k_hw_set_lladdr(struct ath5k_hw *ah, const u8 *mac) { u32 low_id, high_id; u32 pcu_reg; /* Set new station ID */ memcpy(ah->ah_sta_id, mac, ETH_ALEN); pcu_reg = ath5k_hw_reg_read(ah, AR5K_STA_ID1) & 0xffff0000; low_id = AR5K_LOW_ID(mac); high_id = AR5K_HIGH_ID(mac); ath5k_hw_reg_write(ah, low_id, AR5K_STA_ID0); ath5k_hw_reg_write(ah, pcu_reg | high_id, AR5K_STA_ID1); return 0; } /** * ath5k_hw_set_associd - Set BSSID for association * * @ah: The &struct ath5k_hw * @bssid: BSSID * @assoc_id: Assoc id * * Sets the BSSID which trigers the "SME Join" operation */ void ath5k_hw_set_associd(struct ath5k_hw *ah, const u8 *bssid, u16 assoc_id) { u32 low_id, high_id; /* * Set simple BSSID mask on 5212 */ if (ah->ah_version == AR5K_AR5212) { ath5k_hw_reg_write(ah, AR5K_LOW_ID(ah->ah_bssid_mask), AR5K_BSS_IDM0); ath5k_hw_reg_write(ah, AR5K_HIGH_ID(ah->ah_bssid_mask), AR5K_BSS_IDM1); } /* * Set BSSID which triggers the "SME Join" operation */ low_id = AR5K_LOW_ID(bssid); high_id = AR5K_HIGH_ID(bssid); ath5k_hw_reg_write(ah, low_id, AR5K_BSS_ID0); ath5k_hw_reg_write(ah, high_id | ((assoc_id & 0x3fff) << AR5K_BSS_ID1_AID_S), AR5K_BSS_ID1); } /** * ath5k_hw_set_bssid_mask - filter out bssids we listen * * @ah: the &struct ath5k_hw * @mask: the bssid_mask, a u8 array of size ETH_ALEN * * BSSID masking is a method used by AR5212 and newer hardware to inform PCU * which bits of the interface's MAC address should be looked at when trying * to decide which packets to ACK. In station mode and AP mode with a single * BSS every bit matters since we lock to only one BSS. In AP mode with * multiple BSSes (virtual interfaces) not every bit matters because hw must * accept frames for all BSSes and so we tweak some bits of our mac address * in order to have multiple BSSes. * * NOTE: This is a simple filter and does *not* filter out all * relevant frames. Some frames that are not for us might get ACKed from us * by PCU because they just match the mask. * * When handling multiple BSSes you can get the BSSID mask by computing the * set of ~ ( MAC XOR BSSID ) for all bssids we handle. * * When you do this you are essentially computing the common bits of all your * BSSes. Later it is assumed the harware will "and" (&) the BSSID mask with * the MAC address to obtain the relevant bits and compare the result with * (frame's BSSID & mask) to see if they match. */ /* * Simple example: on your card you have have two BSSes you have created with * BSSID-01 and BSSID-02. Lets assume BSSID-01 will not use the MAC address. * There is another BSSID-03 but you are not part of it. For simplicity's sake, * assuming only 4 bits for a mac address and for BSSIDs you can then have: * * \ * MAC: 0001 | * BSSID-01: 0100 | --> Belongs to us * BSSID-02: 1001 | * / * ------------------- * BSSID-03: 0110 | --> External * ------------------- * * Our bssid_mask would then be: * * On loop iteration for BSSID-01: * ~(0001 ^ 0100) -> ~(0101) * -> 1010 * bssid_mask = 1010 * * On loop iteration for BSSID-02: * bssid_mask &= ~(0001 ^ 1001) * bssid_mask = (1010) & ~(0001 ^ 1001) * bssid_mask = (1010) & ~(1001) * bssid_mask = (1010) & (0110) * bssid_mask = 0010 * * A bssid_mask of 0010 means "only pay attention to the second least * significant bit". This is because its the only bit common * amongst the MAC and all BSSIDs we support. To findout what the real * common bit is we can simply "&" the bssid_mask now with any BSSID we have * or our MAC address (we assume the hardware uses the MAC address). * * Now, suppose there's an incoming frame for BSSID-03: * * IFRAME-01: 0110 * * An easy eye-inspeciton of this already should tell you that this frame * will not pass our check. This is beacuse the bssid_mask tells the * hardware to only look at the second least significant bit and the * common bit amongst the MAC and BSSIDs is 0, this frame has the 2nd LSB * as 1, which does not match 0. * * So with IFRAME-01 we *assume* the hardware will do: * * allow = (IFRAME-01 & bssid_mask) == (bssid_mask & MAC) ? 1 : 0; * --> allow = (0110 & 0010) == (0010 & 0001) ? 1 : 0; * --> allow = (0010) == 0000 ? 1 : 0; * --> allow = 0 * * Lets now test a frame that should work: * * IFRAME-02: 0001 (we should allow) * * allow = (0001 & 1010) == 1010 * * allow = (IFRAME-02 & bssid_mask) == (bssid_mask & MAC) ? 1 : 0; * --> allow = (0001 & 0010) == (0010 & 0001) ? 1 :0; * --> allow = (0010) == (0010) * --> allow = 1 * * Other examples: * * IFRAME-03: 0100 --> allowed * IFRAME-04: 1001 --> allowed * IFRAME-05: 1101 --> allowed but its not for us!!! * */ int ath5k_hw_set_bssid_mask(struct ath5k_hw *ah, const u8 *mask) { u32 low_id, high_id; /* Cache bssid mask so that we can restore it * on reset */ memcpy(ah->ah_bssid_mask, mask, ETH_ALEN); if (ah->ah_version == AR5K_AR5212) { low_id = AR5K_LOW_ID(mask); high_id = AR5K_HIGH_ID(mask); ath5k_hw_reg_write(ah, low_id, AR5K_BSS_IDM0); ath5k_hw_reg_write(ah, high_id, AR5K_BSS_IDM1); return 0; } return -EIO; } /************\ * RX Control * \************/ /** * ath5k_hw_start_rx_pcu - Start RX engine * * @ah: The &struct ath5k_hw * * Starts RX engine on PCU so that hw can process RXed frames * (ACK etc). * * NOTE: RX DMA should be already enabled using ath5k_hw_start_rx_dma * TODO: Init ANI here */ void ath5k_hw_start_rx_pcu(struct ath5k_hw *ah) { AR5K_REG_DISABLE_BITS(ah, AR5K_DIAG_SW, AR5K_DIAG_SW_DIS_RX); } /** * at5k_hw_stop_rx_pcu - Stop RX engine * * @ah: The &struct ath5k_hw * * Stops RX engine on PCU * * TODO: Detach ANI here */ void ath5k_hw_stop_rx_pcu(struct ath5k_hw *ah) { AR5K_REG_ENABLE_BITS(ah, AR5K_DIAG_SW, AR5K_DIAG_SW_DIS_RX); } /* * Set multicast filter */ void ath5k_hw_set_mcast_filter(struct ath5k_hw *ah, u32 filter0, u32 filter1) { /* Set the multicat filter */ ath5k_hw_reg_write(ah, filter0, AR5K_MCAST_FILTER0); ath5k_hw_reg_write(ah, filter1, AR5K_MCAST_FILTER1); } /** * ath5k_hw_get_rx_filter - Get current rx filter * * @ah: The &struct ath5k_hw * * Returns the RX filter by reading rx filter and * phy error filter registers. RX filter is used * to set the allowed frame types that PCU will accept * and pass to the driver. For a list of frame types * check out reg.h. */ u32 ath5k_hw_get_rx_filter(struct ath5k_hw *ah) { u32 data, filter = 0; filter = ath5k_hw_reg_read(ah, AR5K_RX_FILTER); /*Radar detection for 5212*/ if (ah->ah_version == AR5K_AR5212) { data = ath5k_hw_reg_read(ah, AR5K_PHY_ERR_FIL); if (data & AR5K_PHY_ERR_FIL_RADAR) filter |= AR5K_RX_FILTER_RADARERR; if (data & (AR5K_PHY_ERR_FIL_OFDM | AR5K_PHY_ERR_FIL_CCK)) filter |= AR5K_RX_FILTER_PHYERR; } return filter; } /** * ath5k_hw_set_rx_filter - Set rx filter * * @ah: The &struct ath5k_hw * @filter: RX filter mask (see reg.h) * * Sets RX filter register and also handles PHY error filter * register on 5212 and newer chips so that we have proper PHY * error reporting. */ void ath5k_hw_set_rx_filter(struct ath5k_hw *ah, u32 filter) { u32 data = 0; /* Set PHY error filter register on 5212*/ if (ah->ah_version == AR5K_AR5212) { if (filter & AR5K_RX_FILTER_RADARERR) data |= AR5K_PHY_ERR_FIL_RADAR; if (filter & AR5K_RX_FILTER_PHYERR) data |= AR5K_PHY_ERR_FIL_OFDM | AR5K_PHY_ERR_FIL_CCK; } /* * The AR5210 uses promiscous mode to detect radar activity */ if (ah->ah_version == AR5K_AR5210 && (filter & AR5K_RX_FILTER_RADARERR)) { filter &= ~AR5K_RX_FILTER_RADARERR; filter |= AR5K_RX_FILTER_PROM; } /*Zero length DMA (phy error reporting) */ if (data) AR5K_REG_ENABLE_BITS(ah, AR5K_RXCFG, AR5K_RXCFG_ZLFDMA); else AR5K_REG_DISABLE_BITS(ah, AR5K_RXCFG, AR5K_RXCFG_ZLFDMA); /*Write RX Filter register*/ ath5k_hw_reg_write(ah, filter & 0xff, AR5K_RX_FILTER); /*Write PHY error filter register on 5212*/ if (ah->ah_version == AR5K_AR5212) ath5k_hw_reg_write(ah, data, AR5K_PHY_ERR_FIL); } /*********************\ * Key table functions * \*********************/ /* * Reset a key entry on the table */ int ath5k_hw_reset_key(struct ath5k_hw *ah, u16 entry) { unsigned int i, type; u16 micentry = entry + AR5K_KEYTABLE_MIC_OFFSET; type = ath5k_hw_reg_read(ah, AR5K_KEYTABLE_TYPE(entry)); for (i = 0; i < AR5K_KEYCACHE_SIZE; i++) ath5k_hw_reg_write(ah, 0, AR5K_KEYTABLE_OFF(entry, i)); /* Reset associated MIC entry if TKIP * is enabled located at offset (entry + 64) */ if (type == AR5K_KEYTABLE_TYPE_TKIP) { for (i = 0; i < AR5K_KEYCACHE_SIZE / 2 ; i++) ath5k_hw_reg_write(ah, 0, AR5K_KEYTABLE_OFF(micentry, i)); } /* * Set NULL encryption on AR5212+ * * Note: AR5K_KEYTABLE_TYPE -> AR5K_KEYTABLE_OFF(entry, 5) * AR5K_KEYTABLE_TYPE_NULL -> 0x00000007 * * Note2: Windows driver (ndiswrapper) sets this to * 0x00000714 instead of 0x00000007 */ if (ah->ah_version > AR5K_AR5211) { ath5k_hw_reg_write(ah, AR5K_KEYTABLE_TYPE_NULL, AR5K_KEYTABLE_TYPE(entry)); if (type == AR5K_KEYTABLE_TYPE_TKIP) { ath5k_hw_reg_write(ah, AR5K_KEYTABLE_TYPE_NULL, AR5K_KEYTABLE_TYPE(micentry)); } } return 0; }