path: root/debian/po/zh_CN.po

# Chinese translations for grub2 po-debconf
# PACKAGE 软件包的简体中文翻译.
# Copyright (C) 2010 THE PACKAGE'S COPYRIGHT HOLDER
# This file is distributed under the same license as the PACKAGE package.
# YunQiang Su <wzssyqa@gmail.com>, 2010, 2011.
#
msgid ""
msgstr ""
"Project-Id-Version: grub2-po-debconf master\n"
"Report-Msgid-Bugs-To: grub2@packages.debian.org\n"
"POT-Creation-Date: 2023-10-02 14:23+0000\n"
"PO-Revision-Date: 2011-05-28 17:29+0800\n"
"Last-Translator: YunQiang Su <wzssyqa@gmail.com>\n"
"Language-Team: Chinese (simplified) <i18n-zh@googlegroups.com>\n"
"Language: \n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bits\n"
"Plural-Forms: nplurals=1; plural=0;\n"

#. Type: boolean
#. Description
#: ../grub-pc.templates.in:2001
msgid "Chainload from menu.lst?"
msgstr "从 menu.lst 进行 chainload？"

#. Type: boolean
#. Description
#: ../grub-pc.templates.in:2001
msgid "GRUB upgrade scripts have detected a GRUB Legacy setup in /boot/grub."
msgstr "GRUB 升级脚本在 /boot/grub 探测到了已安装的  GRUB Legacy。"

#. Type: boolean
#. Description
#: ../grub-pc.templates.in:2001
msgid ""
"In order to replace the Legacy version of GRUB in your system, it is "
"recommended that /boot/grub/menu.lst is adjusted to load a GRUB 2 boot image "
"from your existing GRUB Legacy setup. This step can be automatically "
"performed now."
msgstr ""
"为了取代您系统上的 GRUB Legacy，推荐调整 /boot/grub/menu.lst 为从现有的 GRUB "
"Legacy 设置中加载 GRUB 2 引导镜像。现在可以自动执行这个操作。"

#. Type: boolean
#. Description
#: ../grub-pc.templates.in:2001
msgid ""
"It's recommended that you accept chainloading GRUB 2 from menu.lst, and "
"verify that the new GRUB 2 setup works before it is written to the MBR "
"(Master Boot Record)."
msgstr ""
"推荐您接受从 menu.lst 中 chainload GRUB 2，并且在将 GRUB 2 直接安装到 MBR (主"
"引导记录，Master Boot Record) 之前确定新的 GRUB 2 设置可以工作。"

#. Type: boolean
#. Description
#: ../grub-pc.templates.in:2001
msgid ""
"Whatever your decision, you can replace the old MBR image with GRUB 2 later "
"by issuing the following command as root:"
msgstr ""
"无论现在做什么样的决定，您以后都可以使用 root 身份来运行如下命令来使用 GRUB "
"2 来代替旧的 MBR 映像："

#. Type: multiselect
#. Description
#. Type: multiselect
#. Description
#: ../grub-pc.templates.in:3001 ../grub-pc.templates.in:4001
msgid "GRUB install devices:"
msgstr "GRUB 安装设备："

#. Type: multiselect
#. Description
#: ../grub-pc.templates.in:3001
msgid ""
"The grub-pc package is being upgraded. This menu allows you to select which "
"devices you'd like grub-install to be automatically run for, if any."
msgstr ""
"grub-pc 包已经升级。此菜单允许您选择在哪个设备上自动运行 grub-install，如果有"
"的话。"

#. Type: multiselect
#. Description
#: ../grub-pc.templates.in:3001
msgid ""
"Running grub-install automatically is recommended in most situations, to "
"prevent the installed GRUB core image from getting out of sync with GRUB "
"modules or grub.cfg."
msgstr ""
"在大多数情况下推荐自动运行 grub-install，以避免安装的 GRUB 核心映像与 GRUB 模"
"块或 grub.cfg 不同步。"

#. Type: multiselect
#. Description
#. Type: multiselect
#. Description
#: ../grub-pc.templates.in:3001 ../grub-pc.templates.in:4001
msgid ""
"If you're unsure which drive is designated as boot drive by your BIOS, it is "
"often a good idea to install GRUB to all of them."
msgstr ""
"如果不确定 BIOS 使用哪个驱动器作为主引导，将 GRUB 安装到所有这些驱动器是一个"
"不错的主意。"

#. Type: multiselect
#. Description
#. Type: multiselect
#. Description
#: ../grub-pc.templates.in:3001 ../grub-pc.templates.in:4001
msgid ""
"Note: it is possible to install GRUB to partition boot records as well, and "
"some appropriate partitions are offered here. However, this forces GRUB to "
"use the blocklist mechanism, which makes it less reliable, and therefore is "
"not recommended."
msgstr ""
"注意：也可以将 GRUB 安装到分区的引导记录，这里提供了一些适当的分区。然而，这"
"强制 GRUB 使用黑名单机制，会造成可靠性降低，因此不推荐使用。"

#. Type: multiselect
#. Description
#: ../grub-pc.templates.in:4001
msgid ""
"The GRUB boot loader was previously installed to a disk that is no longer "
"present, or whose unique identifier has changed for some reason. It is "
"important to make sure that the installed GRUB core image stays in sync with "
"GRUB modules and grub.cfg. Please check again to make sure that GRUB is "
"written to the appropriate boot devices."
msgstr ""
"GRUB 引导器先前安装到了一个消失了的磁盘上，或者它的唯一标识符由于某些原因变化"
"了。确保安装的 GRUB 核心映像和 GRUB 模块及 grub.cfg 的同步非常重要。请再次检"
"查以确保 GRUB 安装到了适当的引导设备。"

#. Type: text
#. Description
#. Disk sizes are in decimal megabytes, to match how disk manufacturers
#. usually describe them.
#: ../grub-pc.templates.in:5001
msgid "${DEVICE} (${SIZE} MB; ${MODEL})"
msgstr "${DEVICE} (${SIZE} MB; ${MODEL})"

#. Type: text
#. Description
#. The "-" is used to indicate indentation. Leading spaces may not work.
#: ../grub-pc.templates.in:6001
msgid "- ${DEVICE} (${SIZE} MB; ${PATH})"
msgstr "- ${DEVICE} (${SIZE} MB; ${PATH})"

#. Type: boolean
#. Description
#: ../grub-pc.templates.in:7001
msgid "Writing GRUB to boot device failed - continue?"
msgstr "将 GRUB 写入引导设备失败 - 要继续吗？"

#. Type: boolean
#. Description
#. Type: boolean
#. Description
#: ../grub-pc.templates.in:7001 ../grub-pc.templates.in:8001
msgid "GRUB failed to install to the following devices:"
msgstr "GRUB 安装到如下设备时失败。"

#. Type: boolean
#. Description
#: ../grub-pc.templates.in:7001
msgid ""
"Do you want to continue anyway? If you do, your computer may not start up "
"properly."
msgstr "仍然想要继续？如果这样，您的计算机可能不能正常启动。"

#. Type: boolean
#. Description
#: ../grub-pc.templates.in:8001
msgid "Writing GRUB to boot device failed - try again?"
msgstr "将 GRUB 写入引导设备失败 - 要重新尝试吗？"

#. Type: boolean
#. Description
#: ../grub-pc.templates.in:8001
msgid ""
"You may be able to install GRUB to some other device, although you should "
"check that your system will boot from that device. Otherwise, the upgrade "
"from GRUB Legacy will be canceled."
msgstr ""
"您可能可以安装 GRUB 到其它设备，尽管您需要明确，您的系统将从那个设备启动。否"
"则，从 GRUB Legacy 的升级将被取消。"

#. Type: boolean
#. Description
#: ../grub-pc.templates.in:9001
msgid "Continue without installing GRUB?"
msgstr "不安装 GRUB 并且继续？"

#. Type: boolean
#. Description
#: ../grub-pc.templates.in:9001
msgid ""
"You chose not to install GRUB to any devices. If you continue, the boot "
"loader may not be properly configured, and when this computer next starts up "
"it will use whatever was previously in the boot sector. If there is an "
"earlier version of GRUB 2 in the boot sector, it may be unable to load "
"modules or handle the current configuration file."
msgstr ""
"您没有选择向任何设备安装 GRUB。如果继续，引导器可能不能正确配置，当您的计算机"
"下次启动时，它将使用引导扇区中先前的内容。如果引导扇区中有早期版本的 GRUB 2，"
"其可能不能加载模块或者处理当前配置文件。"

#. Type: boolean
#. Description
#: ../grub-pc.templates.in:9001
msgid ""
"If you are already using a different boot loader and want to carry on doing "
"so, or if this is a special environment where you do not need a boot loader, "
"then you should continue anyway. Otherwise, you should install GRUB "
"somewhere."
msgstr ""
"如果您已经使用了另外一个引导器并且想继续这样做，或者如果这是一个特殊的不需要"
"引导器的环境，这样您可以仍然继续。否则，您应该在某处安装 GRUB。"

#. Type: boolean
#. Description
#: ../grub-pc.templates.in:10001
msgid "Remove GRUB 2 from /boot/grub?"
msgstr "从 /boot/grub 移除 GRUB 2 ?"

#. Type: boolean
#. Description
#: ../grub-pc.templates.in:10001
msgid "Do you want to have all GRUB 2 files removed from /boot/grub?"
msgstr "确定想从 /boot/grub 移除全部 GRUB 2 文件吗？"

#. Type: boolean
#. Description
#: ../grub-pc.templates.in:10001
msgid ""
"This will make the system unbootable unless another boot loader is installed."
msgstr "这会使系统不能引导，除非另外安装其它引导器。"

#. Type: boolean
#. Description
#: ../grub-pc.templates.in:11001
msgid "Finish conversion to GRUB 2 now?"
msgstr "现在完成到 GRUB 2 的转换？"

#. Type: boolean
#. Description
#: ../grub-pc.templates.in:11001
msgid ""
"This system still has files from the GRUB Legacy boot loader installed, but "
"it now also has GRUB 2 boot records installed on these disks:"
msgstr ""
"此系统仍然有 GRUB Legacy 引导器安装的文件，但是现在也在磁盘上安装了 GRUB 2 引"
"导记录："

#. Type: boolean
#. Description
#: ../grub-pc.templates.in:11001
msgid ""
"It seems likely that GRUB Legacy is no longer in use, and that you should "
"instead upgrade the GRUB 2 images on these disks and finish the conversion "
"to GRUB 2 by removing old GRUB Legacy files. If you do not upgrade these "
"GRUB 2 images, then they may be incompatible with the new packages and cause "
"your system to stop booting properly."
msgstr ""
"好像 GRUB Legacy 已经不再使用了，并且您应该在这些磁盘上转而升级到 GRUB 2 映"
"像，并且通过删除旧的 GRUB Legacy 文件来完成到 GRUB 2 的转换。如果不升级这些 "
"GRUB 2 映像，他们将可能不能与新包兼容而造成您的系统不能正常引导。"

#. Type: boolean
#. Description
#: ../grub-pc.templates.in:11001
msgid ""
"You should generally finish the conversion to GRUB 2 unless these boot "
"records were created by a GRUB 2 installation on some other operating system."
msgstr ""
"您通常应该完成到 GRUB 2 的转换，除非这些引导记录是由安装到其它操作系统上的 "
"GRUB 2 创建的。"

#. Type: string
#. Description
#: ../templates.in:1001
msgid "Linux command line:"
msgstr "Linux 命令行："

#. Type: string
#. Description
#: ../templates.in:1001
msgid ""
"The following Linux command line was extracted from /etc/default/grub or the "
"`kopt' parameter in GRUB Legacy's menu.lst. Please verify that it is "
"correct, and modify it if necessary. The command line is allowed to be empty."
msgstr ""
"已从 /etc/default/grub 或 GRUB Legacy 的 menu.lst 中的 `kopt' 参数中提取如下 "
"Linux 命令行。请检查是否正确的，并且根据需要进行修改。此命令行可以为空。"

#. Type: string
#. Description
#: ../templates.in:2001
msgid "Linux default command line:"
msgstr "Linux 默认命令行："

#. Type: string
#. Description
#: ../templates.in:2001
msgid ""
"The following string will be used as Linux parameters for the default menu "
"entry but not for the recovery mode."
msgstr "如下字符串将被用于默认菜单项的 Linux 参数，但是不会用于恢复模式。"

#. Type: boolean
#. Description
#: ../templates.in:3001
msgid "Force extra installation to the EFI removable media path?"
msgstr ""

#. Type: boolean
#. Description
#: ../templates.in:3001
msgid ""
"Some EFI-based systems are buggy and do not handle new bootloaders "
"correctly. If you force an extra installation of GRUB to the EFI removable "
"media path, this should ensure that this system will boot Debian correctly "
"despite such a problem. However, it may remove the ability to boot any other "
"operating systems that also depend on this path. If so, you will need to "
"make sure that GRUB is configured successfully to be able to boot any other "
"OS installations correctly."
msgstr ""

#. Type: boolean
#. Description
#: ../templates.in:4001
msgid "Update NVRAM variables to automatically boot into Debian?"
msgstr ""

#. Type: boolean
#. Description
#: ../templates.in:4001
msgid ""
"GRUB can configure your platform's NVRAM variables so that it boots into "
"Debian automatically when powered on. However, you may prefer to disable "
"this behavior and avoid changes to your boot configuration. For example, if "
"your NVRAM variables have been set up such that your system contacts a PXE "
"server on every boot, this would preserve that behavior."
msgstr ""

#. Type: boolean
#. Description
#: ../templates.in:5001
msgid "Run os-prober automatically to detect and boot other OSes?"
msgstr ""

#. Type: boolean
#. Description
#: ../templates.in:5001
msgid ""
"GRUB can use the os-prober tool to attempt to detect other operating systems "
"on your computer and add them to its list of boot options automatically."
msgstr ""

#. Type: boolean
#. Description
#: ../templates.in:5001
msgid ""
"If your computer has multiple operating systems installed, then this is "
"probably what you want. However, if your computer is a host for guest OSes "
"installed via LVM or raw disk devices, running os-prober can cause damage to "
"those guest OSes as it mounts filesystems to look for things."
msgstr ""

#. Type: string
#. Description
#: ../templates.in:6001
msgid "kFreeBSD command line:"
msgstr "kFreeBSD 参数："

#. Type: string
#. Description
#: ../templates.in:6001
msgid ""
"The following kFreeBSD command line was extracted from /etc/default/grub or "
"the `kopt' parameter in GRUB Legacy's menu.lst. Please verify that it is "
"correct, and modify it if necessary. The command line is allowed to be empty."
msgstr ""
"已从 /etc/default/grub 或者 GRUB Legacy 的 menu.lst 中的 `kopt' 参数中提取如"
"下 kFreeBSD 命令行参数。请请检查是否正确，并且根据需要进行修改。此命令行可以"
"为空。"

#. Type: string
#. Description
#: ../templates.in:7001
msgid "kFreeBSD default command line:"
msgstr "kFreeBSD 默认命令行："

#. Type: string
#. Description
#: ../templates.in:7001
msgid ""
"The following string will be used as kFreeBSD parameters for the default "
"menu entry but not for the recovery mode."
msgstr "如下字符串将用于默认菜单项的 kFreeBSD 参数，但不会用于恢复模式。"

#~ msgid "/boot/grub/device.map has been regenerated"
#~ msgstr "/boot/grub/device.map 已经生成"

#~ msgid ""
#~ "The file /boot/grub/device.map has been rewritten to use stable device "
#~ "names. In most cases, this should significantly reduce the need to change "
#~ "it in future, and boot menu entries generated by GRUB should not be "
#~ "affected."
#~ msgstr ""
#~ "文件 /boot/grub/device.map 已经重写以使用稳定的设备名。多数情况下，这应该"
#~ "显著地减少以后修改它的需要，并且 GRUB 产生的引导菜单项不会受影响。"

#~ msgid ""
#~ "However, since more than one disk is present in the system, it is "
#~ "possible that the system is depending on the old device map. Please check "
#~ "whether there are any custom boot menu entries that rely on GRUB's (hdN) "
#~ "drive numbering, and update them if necessary."
#~ msgstr ""
#~ "然而，因为您的系统上有多个磁盘，系统可能依赖旧的设备映射。请检查您是否有任"
#~ "何自定义的依赖 GRUB 的 (hdN) 驱动器号的引导菜单项，如果需要请更新它们。"

#~ msgid ""
#~ "If you do not understand this message, or if there are no custom boot "
#~ "menu entries, you can ignore this message."
#~ msgstr ""
#~ "如果您不理解此消息，或者没有任何自定义的引导菜单项，您可以忽略此消息。"

#~ msgid ""
#~ "In either case, whenever you want GRUB 2 to be loaded directly from MBR, "
#~ "you can do so by issuing (as root) the following command:"
#~ msgstr ""
#~ "无论何种情况，当您想直接从 MBR 加载 GRUB 2 时，您可以通过以 root 身份执行"
#~ "如下命令来实现："

#~ msgid "GRUB installation failed. Continue?"
#~ msgstr "GRUB 安装失败。仍然继续？"