false
Whether edge scrolling is enabled
When enabled, touchpads that support edge scrolling will have that feature enabled.
true
Whether two-finger scrolling is enabled
When enabled, touchpads that support two-finger scrolling will have that feature enabled.
true
Whether to disable the touchpad while typing
When enabled, touchpads will be disabled while typing on the keyboard.
false
Enable mouse clicks with touchpad
Set this to TRUE to be able to send mouse clicks by tapping on the touchpad.
'default'
Tap Button Map
Defines the mapping between the number of fingers and touchpad buttons. The default is to have a 1, 2 and 3 finger tap to map to the left, right and middle button ("lrm"), respectively.
true
Enable tap-and-drag with touchpad
Set this to TRUE to be able to start a drag by tapping and immediately moving the finger that’s now pressed on the touchpad.
false
Enable tap-and-drag-lock with touchpad
Set this to TRUE to lock the dragging process within a short timeout when the finger is lifted on the touchpad and the tap-and-drag setting is enabled.
'enabled'
Touchpad enabled
Defines the situations in which the touchpad is enabled.
'mouse'
Touchpad button orientation
Swap left and right mouse buttons for left-handed mice with “left”, “right” for right-handed, “mouse” to follow the mouse setting.
'default'
Acceleration profile
Acceleration profile used for connected touchpads. The acceleration profile can be set to either default (“default”) which uses the default acceleration profile for each device, flat (“flat”), which accelerates by a device specific constant factor derived from the configured pointer speed, or adaptive (“adaptive”) which adapts the acceleration depending on the mouse movement. If a touchpad doesn’t support the configured profile, “default” will be used.
0
Pointer speed
Pointer speed for the touchpad. Accepted values are in the [-1..1] range (from “unaccelerated” to “fast”). A value of 0 is the system default.
true
Natural scrolling
Set this to TRUE to enable natural (reverse) scrolling for touchpads.
'fingers'
Click method
How to generate software-emulated buttons, either disabled (“none”), through specific areas (“areas”), number of fingers (“fingers”) or left as hardware default (“default”).
false
Emulate middle click
Set this to TRUE to enable middle click during simultaneous left and right click.
true
Keyboard repeat
Set this to TRUE to enable keyboard repeat.
30
Key Repeat Interval
Delay between repeats in milliseconds.
500
Initial Key Repeat Delay
Initial key repeat delay in milliseconds.
true
Remember NumLock state
When set to true, GNOME will remember the state of the NumLock LED between sessions.
false
NumLock state
The remembered state of the NumLock LED.
false
Mouse button orientation
Swap left and right mouse buttons for left-handed mice.
0
Pointer speed
Pointer speed for mice. Accepted values are in the [-1..1] range (from “unaccelerated” to “fast”). A value of 0 is the system default.
false
Natural scrolling
Set this to TRUE to enable natural (reverse) scrolling for mice.
'default'
Acceleration profile
Acceleration profile used for connected mice. The acceleration profile can be set to either default (“default”) which uses the default acceleration profile for each device, flat (“flat”), which accelerates by a device specific constant factor derived from the configured pointer speed, or adaptive (“adaptive”) which adapts the acceleration depending on the mouse movement. If a mouse doesn’t support the configured profile, “default” will be used.
false
Emulate middle click
Set this to TRUE to enable middle click during simultaneous left and right click.
400
Double click time
Length of a double click in milliseconds.
8
Drag threshold
Distance before a drag is started.
["", "", ""]
Drawing tablet mapping
EDID information of the output the tablet is mapped to. Must be in the format [vendor, product, serial]. ["","",""] relies on automatic mapping.
'absolute'
Tablet mapping
How input affects the pointer on the screen
[0, 0, 0, 0]
Tablet area
Dead area padding around the active area, in percentages. Respectively applied to left,right,top and bottom sides.
false
Tablet aspect ratio
Enable this to restrict the tablet area to match the aspect ratio of the output.
false
Tablet left-handed mode
Enable this to allow physically rotating the tablet for left-handed setups
[0, 0, 100, 100]
Stylus pressure curve
Set this to x1, y1 and x2, y2 of the pressure curve applied to the stylus.
[0, 0, 100, 100]
Eraser pressure curve
Set this to x1, y1 and x2, y2 of the pressure curve applied to the eraser.
'default'
Button action
Stylus button action, this button is located along the pen handle.
'default'
Secondary button action
Secondary stylus button action, this button is located along the pen handle on some styli like the Grip Pen. Other styli like the Airbrush Pen or the Inking Pen only have one button, this setting is ineffective on those.
'default'
Tertiary button action
Tertiary stylus button action, this button is located along the pen handle on some styli like the 3D Pen. Other styli like the Grip Pen only have two buttons, this setting is ineffective on those.
'none'
Pad button action type
The type of action triggered by the button being pressed.
''
Key combination for the custom action
The keyboard shortcut generated when the button is pressed for custom actions.
["", "", ""]
Touchscreen output mapping
EDID information of the output the touchscreen is mapped to. Must be in the format [vendor, product, serial]. ["","",""] relies on automatic mapping.
0
Mouse wheel emulation button. 0 to disable the feature.
false
Mouse wheel emulation button lock
Set this to TRUE to enable button locking for the wheel emulation button. If enabled, the first click of the button enables scrolling, the second click disables scrolling again.
'default'
Acceleration profile
Acceleration profile used for the trackball. The acceleration profile can be set to either default (“default”) which uses the default acceleration profile, flat (“flat”), which accelerates by a device specific constant factor derived from the configured speed, or adaptive (“adaptive”) which adapts the acceleration depending on the movement. If the trackball doesn’t support the configured profile, “default” will be used.
false
Emulate middle click
Set this to TRUE to enable middle click during simultaneous left and right click.
0
Pointer speed
Pointer speed for pointing sticks. Accepted values are in the [-1..1] range (from “unaccelerated” to “fast”). A value of 0 is the system default.
'default'
Acceleration profile
Acceleration profile used for the pointing stick. The acceleration profile can be set to either default (“default”) which uses the default acceleration profile, flat (“flat”), which accelerates by a device specific constant factor derived from the configured speed, or adaptive (“adaptive”) which adapts the acceleration depending on the movement. If the pointing stick doesn’t support the configured profile, “default” will be used.
'default'
Scrolling method
Scrolling method used for pointing sticks. The scrolling method can be set to either default (“default”) which uses the default method, none (“none”), which disables scrolling, or middle-button (“on-button-down”) which enables scrolling whilst the middle button is held down.