Plot org.ekips.filter.plot hpgl_decoder.py hpgl_encoder.py Please make sure that all objects you want to plot are converted to paths. Serial Parallel /dev/usb/lp2 COM1 9600 110 300 600 1200 2400 4800 14400 19200 28800 38400 56000 57600 115200 8 Bits 7 Bits 6 Bits 5 Bits 1 Bit 1.5 Bits 2 Bits None Even Odd Mark Space Software (XON/XOFF) Hardware (RTS/CTS) Hardware (DSR/DTR + RTS/CTS) None HPGL DMPL KNK Plotter (HPGL variant) Using wrong settings can under certain circumstances cause Inkscape to freeze. Always save your work before plotting! This can be a physical serial connection or a USB-to-Serial bridge. Ask your plotter manufacturer for drivers if needed. Parallel (LPT) connections are not supported. 1016.0 1016.0 1 0 0 0 90 180 270 false false false If you want to use multiple pens and speeds with your pen plotter, create one layer for each pen number and speed value, name the layers "Pen 1 Speed 10", "Pen 2 Speed 20" etc. and put your drawings on the corresponding layers. This overrides the pen number and pen speed options in the menu above. 1.00 0.25 true 1.2 true All these settings depend on the plotter you use, for more information please consult the manual or homepage for your plotter. path