summaryrefslogtreecommitdiffstats
path: root/tests/integration/deckard/template/unbound.j2
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--tests/integration/deckard/template/unbound.j2801
1 files changed, 801 insertions, 0 deletions
diff --git a/tests/integration/deckard/template/unbound.j2 b/tests/integration/deckard/template/unbound.j2
new file mode 100644
index 0000000..eccf8fa
--- /dev/null
+++ b/tests/integration/deckard/template/unbound.j2
@@ -0,0 +1,801 @@
+#
+# Example configuration file.
+#
+# See unbound.conf(5) man page, version 1.5.10.
+#
+# this is a comment.
+
+#Use this to include other text into the file.
+#include: "otherfile.conf"
+
+# The server clause sets the main parameters.
+server:
+ # whitespace is not necessary, but looks cleaner.
+ trust-anchor-signaling: no
+
+ # verbosity number, 0 is least verbose. 1 is default.
+ verbosity: 3
+
+ # print statistics to the log (for every thread) every N seconds.
+ # Set to "" or 0 to disable. Default is disabled.
+ # Needs to be disabled for munin plugin
+ statistics-interval: 0
+
+ # enable cumulative statistics, without clearing them after printing.
+ # Needs to be disabled for munin plugin
+ statistics-cumulative: no
+
+ # enable extended statistics (query types, answer codes, status)
+ # printed from unbound-control. default off, because of speed.
+ # Needs to be enabled for munin plugin
+ extended-statistics: yes
+
+ # number of threads to create. 1 disables threading.
+ num-threads: 1
+
+ # specify the interfaces to answer queries from by ip-address.
+ # The default is to listen to localhost (127.0.0.1 and ::1).
+ # specify 0.0.0.0 and ::0 to bind to all available interfaces.
+ # specify every interface[@port] on a new 'interface:' labelled line.
+ # The listen interfaces are not changed on reload, only on restart.
+ interface: {{SELF_ADDR}}
+ # interface: ::0
+ # interface: 192.0.2.153
+ # interface: 192.0.2.154
+ # interface: 192.0.2.154@5003
+ # interface: 2001:DB8::5
+ #
+ # for dns over tls and raw dns over port 80
+ # interface: 0.0.0.0@443
+ # interface: ::0@443
+ # interface: 0.0.0.0@80
+ # interface: ::0@80
+
+ # enable this feature to copy the source address of queries to reply.
+ # Socket options are not supported on all platforms. experimental.
+ # interface-automatic: yes
+ #
+ # NOTE: Enable this option when specifying interface 0.0.0.0 or ::0
+ # NOTE: Disabled per Fedora policy not to listen to * on default install
+ # NOTE: If deploying on non-default port, eg 80/443, this needs to be disabled
+ interface-automatic: no
+
+ # port to answer queries from
+ # port: 53
+
+ # specify the interfaces to send outgoing queries to authoritative
+ # server from by ip-address. If none, the default (all) interface
+ # is used. Specify every interface on a 'outgoing-interface:' line.
+ outgoing-interface: {{SELF_ADDR}}
+ # outgoing-interface: 2001:DB8::5
+ # outgoing-interface: 2001:DB8::6
+
+ # Specify a netblock to use remainder 64 bits as random bits for
+ # upstream queries. Uses freebind option (Linux).
+ # outgoing-interface: 2001:DB8::/64
+ # Also (Linux:) ip -6 addr add 2001:db8::/64 dev lo
+ # And: ip -6 route add local 2001:db8::/64 dev lo
+ # And set prefer-ip6: yes to use the ip6 randomness from a netblock.
+ # Set this to yes to prefer ipv6 upstream servers over ipv4.
+ # prefer-ip6: no
+
+ # number of ports to allocate per thread, determines the size of the
+ # port range that can be open simultaneously. About double the
+ # num-queries-per-thread, or, use as many as the OS will allow you.
+ # outgoing-range: 4096
+
+ # permit unbound to use this port number or port range for
+ # making outgoing queries, using an outgoing interface.
+ # Only ephemeral ports are allowed by SElinux
+ #outgoing-port-permit: 32768-60999
+
+ # deny unbound the use this of port number or port range for
+ # making outgoing queries, using an outgoing interface.
+ # Use this to make sure unbound does not grab a UDP port that some
+ # other server on this computer needs. The default is to avoid
+ # IANA-assigned port numbers.
+ # If multiple outgoing-port-permit and outgoing-port-avoid options
+ # are present, they are processed in order.
+ # Our SElinux policy does not allow non-ephemeral ports to be used
+ #outgoing-port-avoid: 0-32767
+
+ # number of outgoing simultaneous tcp buffers to hold per thread.
+ # outgoing-num-tcp: 10
+
+ # number of incoming simultaneous tcp buffers to hold per thread.
+ # incoming-num-tcp: 10
+
+ # buffer size for UDP port 53 incoming (SO_RCVBUF socket option).
+ # 0 is system default. Use 4m to catch query spikes for busy servers.
+ # so-rcvbuf: 0
+
+ # buffer size for UDP port 53 outgoing (SO_SNDBUF socket option).
+ # 0 is system default. Use 4m to handle spikes on very busy servers.
+ # so-sndbuf: 0
+
+ # use SO_REUSEPORT to distribute queries over threads.
+ # so-reuseport: no
+
+ # use IP_TRANSPARENT so the interface: addresses can be non-local
+ # and you can config non-existing IPs that are going to work later on
+ # (uses IP_BINDANY on FreeBSD).
+ #ip-transparent: yes
+
+ # use IP_FREEBIND so the interface: addresses can be non-local
+ # and you can bind to nonexisting IPs and interfaces that are down.
+ # Linux only. On Linux you also have ip-transparent that is similar.
+ # ip-freebind: no
+
+ # EDNS reassembly buffer to advertise to UDP peers (the actual buffer
+ # is set with msg-buffer-size). 1480 can solve fragmentation (timeouts).
+ edns-buffer-size: 4096
+
+ # Maximum UDP response size (not applied to TCP response).
+ # Suggested values are 512 to 4096. Default is 4096. 65536 disables it.
+ # 3072 causes +dnssec any isc.org queries to need TC=1. Helps mitigating DDOS
+ max-udp-size: 4096
+
+ # buffer size for handling DNS data. No messages larger than this
+ # size can be sent or received, by UDP or TCP. In bytes.
+ # msg-buffer-size: 65552
+
+ # the amount of memory to use for the message cache.
+ # plain value in bytes or you can append k, m or G. default is "4Mb".
+ # msg-cache-size: 4m
+
+ # the number of slabs to use for the message cache.
+ # the number of slabs must be a power of 2.
+ # more slabs reduce lock contention, but fragment memory usage.
+ # msg-cache-slabs: 4
+
+ # the number of queries that a thread gets to service.
+ # num-queries-per-thread: 1024
+
+ # if very busy, 50% queries run to completion, 50% get timeout in msec
+ # jostle-timeout: 200
+
+ # msec to wait before close of port on timeout UDP. 0 disables.
+ # delay-close: 0
+
+ # the amount of memory to use for the RRset cache.
+ # plain value in bytes or you can append k, m or G. default is "4Mb".
+ # rrset-cache-size: 4m
+
+ # the number of slabs to use for the RRset cache.
+ # the number of slabs must be a power of 2.
+ # more slabs reduce lock contention, but fragment memory usage.
+ # rrset-cache-slabs: 4
+
+ # the time to live (TTL) value lower bound, in seconds. Default 0.
+ # If more than an hour could easily give trouble due to stale data.
+ # cache-min-ttl: 0
+
+ # the time to live (TTL) value cap for RRsets and messages in the
+ # cache. Items are not cached for longer. In seconds.
+ # cache-max-ttl: 86400
+
+ # the time to live (TTL) value cap for negative responses in the cache
+ # cache-max-negative-ttl: 3600
+
+ # the time to live (TTL) value for cached roundtrip times, lameness and
+ # EDNS version information for hosts. In seconds.
+ # infra-host-ttl: 900
+
+ # minimum wait time for responses, increase if uplink is long. In msec.
+ # infra-cache-min-rtt: 50
+
+ # the number of slabs to use for the Infrastructure cache.
+ # the number of slabs must be a power of 2.
+ # more slabs reduce lock contention, but fragment memory usage.
+ # infra-cache-slabs: 4
+
+ # the maximum number of hosts that are cached (roundtrip, EDNS, lame).
+ # infra-cache-numhosts: 10000
+
+ # define a number of tags here, use with local-zone, access-control.
+ # repeat the define-tag statement to add additional tags.
+ # define-tag: "tag1 tag2 tag3"
+
+ # Enable IPv4, "yes" or "no".
+ # do-ip4: yes
+
+ # Enable IPv6, "yes" or "no".
+ {% if DO_IP6 == "true" %}
+ do-ip6: yes
+ {% else %}
+ do-ip6: no
+ {% endif %}
+
+ {% if DO_IP4 == "true" %}
+ do-ip4: yes
+ {% else %}
+ do-ip4: no
+ {% endif %}
+
+ # Enable UDP, "yes" or "no".
+ # NOTE: if setting up an unbound on tls443 for public use, you might want to
+ # disable UDP to avoid being used in DNS amplification attacks.
+ # do-udp: yes
+
+ # Enable TCP, "yes" or "no".
+ # do-tcp: yes
+
+ # upstream connections use TCP only (and no UDP), "yes" or "no"
+ # useful for tunneling scenarios, default no.
+ # tcp-upstream: no
+
+ # Maximum segment size (MSS) of TCP socket on which the server
+ # responds to queries. Default is 0, system default MSS.
+ # tcp-mss: 0
+
+ # Maximum segment size (MSS) of TCP socket for outgoing queries.
+ # Default is 0, system default MSS.
+ # outgoing-tcp-mss: 0
+
+ # Detach from the terminal, run in background, "yes" or "no".
+ do-daemonize: no
+
+ # control which clients are allowed to make (recursive) queries
+ # to this server. Specify classless netblocks with /size and action.
+ # By default everything is refused, except for localhost.
+ # Choose deny (drop message), refuse (polite error reply),
+ # allow (recursive ok), allow_snoop (recursive and nonrecursive ok)
+ # deny_non_local (drop queries unless can be answered from local-data)
+ # refuse_non_local (like deny_non_local but polite error reply).
+ # access-control: 0.0.0.0/0 refuse
+ # access-control: 127.0.0.0/8 allow
+ access-control: ::0/0 allow_snoop
+ # access-control: ::1 allow
+ # access-control: ::ffff:127.0.0.1 allow
+
+ # tag access-control with list of tags (in "" with spaces between)
+ # Clients using this access control element use localzones that
+ # are tagged with one of these tags.
+ # access-control-tag: 192.0.2.0/24 "tag2 tag3"
+
+ # set action for particular tag for given access control element
+ # if you have multiple tag values, the tag used to lookup the action
+ # is the first tag match between access-control-tag and local-zone-tag
+ # where "first" comes from the order of the define-tag values.
+ # access-control-tag-action: 192.0.2.0/24 tag3 refuse
+
+ # set redirect data for particular tag for access control element
+ # access-control-tag-data: 192.0.2.0/24 tag2 "A 127.0.0.1"
+
+ # if given, a chroot(2) is done to the given directory.
+ # i.e. you can chroot to the working directory, for example,
+ # for extra security, but make sure all files are in that directory.
+ #
+ # If chroot is enabled, you should pass the configfile (from the
+ # commandline) as a full path from the original root. After the
+ # chroot has been performed the now defunct portion of the config
+ # file path is removed to be able to reread the config after a reload.
+ #
+ # All other file paths (working dir, logfile, roothints, and
+ # key files) can be specified in several ways:
+ # o as an absolute path relative to the new root.
+ # o as a relative path to the working directory.
+ # o as an absolute path relative to the original root.
+ # In the last case the path is adjusted to remove the unused portion.
+ #
+ # The pid file can be absolute and outside of the chroot, it is
+ # written just prior to performing the chroot and dropping permissions.
+ #
+ # Additionally, unbound may need to access /dev/random (for entropy).
+ # How to do this is specific to your OS.
+ #
+ # If you give "" no chroot is performed. The path must not end in a /.
+ # chroot: "/var/lib/unbound"
+ chroot: ""
+
+ # if given, user privileges are dropped (after binding port),
+ # and the given username is assumed. Default is user "unbound".
+ # If you give "" no privileges are dropped.
+ username: ""
+
+ # the working directory. The relative files in this config are
+ # relative to this directory. If you give "" the working directory
+ # is not changed.
+ # If you give a server: directory: dir before include: file statements
+ # then those includes can be relative to the working directory.
+ directory: ""
+
+ # the log file, "" means log to stderr.
+ # Use of this option sets use-syslog to "no".
+ # logfile: ""
+
+ # Log to syslog(3) if yes. The log facility LOG_DAEMON is used to
+ # log to, with identity "unbound". If yes, it overrides the logfile.
+ use-syslog: no
+
+ # print UTC timestamp in ascii to logfile, default is epoch in seconds.
+ log-time-ascii: yes
+
+ # print one line with time, IP, name, type, class for every query.
+ log-queries: yes
+
+ # the pid file. Can be an absolute path outside of chroot/work dir.
+ pidfile: "unbound.pid"
+
+ # file to read root hints from.
+ # get one from https://www.internic.net/domain/named.cache
+ {% if ROOT_ADDR %}
+ root-hints: "hints.zone"
+ {% endif %}
+
+ # enable to not answer id.server and hostname.bind queries.
+ # hide-identity: no
+
+ # enable to not answer version.server and version.bind queries.
+ # hide-version: no
+
+ # the identity to report. Leave "" or default to return hostname.
+ # identity: ""
+
+ # the version to report. Leave "" or default to return package version.
+ # version: ""
+
+ # the target fetch policy.
+ # series of integers describing the policy per dependency depth.
+ # The number of values in the list determines the maximum dependency
+ # depth the recursor will pursue before giving up. Each integer means:
+ # -1 : fetch all targets opportunistically,
+ # 0: fetch on demand,
+ # positive value: fetch that many targets opportunistically.
+ # Enclose the list of numbers between quotes ("").
+ target-fetch-policy: "0 0 0 0 0"
+
+ # Harden against very small EDNS buffer sizes.
+ # harden-short-bufsize: no
+
+ # Harden against unseemly large queries.
+ # harden-large-queries: no
+
+ # Harden against out of zone rrsets, to avoid spoofing attempts.
+
+ {% if HARDEN_GLUE == "true" %}
+ harden-glue: yes
+ {% else %}
+ harden-glue: no
+ {% endif %}
+
+ # Harden against receiving dnssec-stripped data. If you turn it
+ # off, failing to validate dnskey data for a trustanchor will
+ # trigger insecure mode for that zone (like without a trustanchor).
+ # Default on, which insists on dnssec data for trust-anchored zones.
+ harden-dnssec-stripped: yes
+
+ # Harden against queries that fall under dnssec-signed nxdomain names.
+ harden-below-nxdomain: yes
+
+ # Harden the referral path by performing additional queries for
+ # infrastructure data. Validates the replies (if possible).
+ # Default off, because the lookups burden the server. Experimental
+ # implementation of draft-wijngaards-dnsext-resolver-side-mitigation.
+ harden-referral-path: yes
+
+ # Harden against algorithm downgrade when multiple algorithms are
+ # advertised in the DS record. If no, allows the weakest algorithm
+ # to validate the zone.
+ harden-algo-downgrade: yes
+
+ # Sent minimum amount of information to upstream servers to enhance
+ # privacy. Only sent minimum required labels of the QNAME and set QTYPE
+ # to NS when possible.
+ {% if QMIN == "false" %}
+ qname-minimisation: no
+ {% else %}
+ qname-minimisation: yes
+ {% endif %}
+
+ # Use 0x20-encoded random bits in the query to foil spoof attempts.
+ # This feature is an experimental implementation of draft dns-0x20.
+ use-caps-for-id: yes
+
+ # Domains (and domains in them) without support for dns-0x20 and
+ # the fallback fails because they keep sending different answers.
+ # caps-whitelist: "licdn.com"
+ # caps-whitelist: "senderbase.org"
+
+ # Enforce privacy of these addresses. Strips them away from answers.
+ # It may cause DNSSEC validation to additionally mark it as bogus.
+ # Protects against 'DNS Rebinding' (uses browser as network proxy).
+ # Only 'private-domain' and 'local-data' names are allowed to have
+ # these private addresses. No default.
+ # private-address: 10.0.0.0/8
+ # private-address: 172.16.0.0/12
+ # private-address: 192.168.0.0/16
+ # private-address: 169.254.0.0/16
+ # private-address: fd00::/8
+ # private-address: fe80::/10
+ # private-address: ::ffff:0:0/96
+
+ # Allow the domain (and its subdomains) to contain private addresses.
+ # local-data statements are allowed to contain private addresses too.
+ # private-domain: "example.com"
+
+ # If nonzero, unwanted replies are not only reported in statistics,
+ # but also a running total is kept per thread. If it reaches the
+ # threshold, a warning is printed and a defensive action is taken,
+ # the cache is cleared to flush potential poison out of it.
+ # A suggested value is 10000000, the default is 0 (turned off).
+ unwanted-reply-threshold: 10000000
+
+ # Do not query the following addresses. No DNS queries are sent there.
+ # List one address per entry. List classless netblocks with /size,
+ # do-not-query-address: 127.0.0.1/8
+ # do-not-query-address: ::1
+
+ # if yes, the above default do-not-query-address entries are present.
+ # if no, localhost can be queried (for testing and debugging).
+ {% if DO_NOT_QUERY_LOCALHOST == "false" %}
+ do-not-query-localhost: no
+ {% else %}
+ do-not-query-localhost: yes
+ {% endif %}
+
+ # if yes, perform prefetching of almost expired message cache entries.
+ prefetch: no
+
+ # if yes, perform key lookups adjacent to normal lookups.
+ prefetch-key: no
+
+ # if yes, Unbound rotates RRSet order in response.
+ rrset-roundrobin: yes
+
+ # if yes, Unbound doesn't insert authority/additional sections
+ # into response messages when those sections are not required.
+ minimal-responses: no
+
+ # true to disable DNSSEC lameness check in iterator.
+ # disable-dnssec-lame-check: no
+
+ # module configuration of the server. A string with identifiers
+ # separated by spaces. Syntax: "[dns64] [validator] iterator"
+ # module-config: "validator iterator"
+
+ # File with trusted keys, kept uptodate using RFC5011 probes,
+ # initial file like trust-anchor-file, then it stores metadata.
+ # Use several entries, one per domain name, to track multiple zones.
+ #
+ # If you want to perform DNSSEC validation, run unbound-anchor before
+ # you start unbound (i.e. in the system boot scripts). And enable:
+ # Please note usage of unbound-anchor root anchor is at your own risk
+ # and under the terms of our LICENSE (see that file in the source).
+ # auto-trust-anchor-file: "/var/lib/unbound/root.key"
+
+ {% for TAF in TRUST_ANCHOR_FILES %}
+ auto-trust-anchor-file: "{{TAF}}"
+ {% endfor %}
+
+ # File with DLV trusted keys. Same format as trust-anchor-file.
+ # There can be only one DLV configured, it is trusted from root down.
+ # DLV is going to be decommissioned. Please do not use it any more.
+ # dlv-anchor-file: "dlv.isc.org.key"
+
+ # File with trusted keys for validation. Specify more than one file
+ # with several entries, one file per entry.
+ # Zone file format, with DS and DNSKEY entries.
+ # Note this gets out of date, use auto-trust-anchor-file please.
+
+ # Trusted key for validation. DS or DNSKEY. specify the RR on a
+ # single line, surrounded by "". TTL is ignored. class is IN default.
+ # Note this gets out of date, use auto-trust-anchor-file please.
+ # (These examples are from August 2007 and may not be valid anymore).
+ # trust-anchor: "jelte.nlnetlabs.nl. DS 42860 5 1 14D739EB566D2B1A5E216A0BA4D17FA9B038BE4A"
+
+ # File with trusted keys for validation. Specify more than one file
+ # with several entries, one file per entry. Like trust-anchor-file
+ # but has a different file format. Format is BIND-9 style format,
+ # the trusted-keys { name flag proto algo "key"; }; clauses are read.
+ # you need external update procedures to track changes in keys.
+ # trusted-keys-file: ""
+ #
+ #trusted-keys-file: /etc/unbound/keys.d/*.key
+ #auto-trust-anchor-file: "/var/lib/unbound/root.key"
+
+ # Ignore chain of trust. Domain is treated as insecure.
+ # domain-insecure: "example.com"
+ {% for DI in NEGATIVE_TRUST_ANCHORS %}
+ domain-insecure: "{{DI}}"
+ {% endfor %}
+
+
+ # Override the date for validation with a specific fixed date.
+ # Do not set this unless you are debugging signature inception
+ # and expiration. "" or "0" turns the feature off. -1 ignores date.
+ # val-override-date: ""
+
+ # The time to live for bogus data, rrsets and messages. This avoids
+ # some of the revalidation, until the time interval expires. in secs.
+ # val-bogus-ttl: 60
+
+ # The signature inception and expiration dates are allowed to be off
+ # by 10% of the signature lifetime (expir-incep) from our local clock.
+ # This leeway is capped with a minimum and a maximum. In seconds.
+ # val-sig-skew-min: 3600
+ # val-sig-skew-max: 86400
+
+ # Should additional section of secure message also be kept clean of
+ # unsecure data. Useful to shield the users of this validator from
+ # potential bogus data in the additional section. All unsigned data
+ # in the additional section is removed from secure messages.
+ val-clean-additional: yes
+
+ # Turn permissive mode on to permit bogus messages. Thus, messages
+ # for which security checks failed will be returned to clients,
+ # instead of SERVFAIL. It still performs the security checks, which
+ # result in interesting log files and possibly the AD bit in
+ # replies if the message is found secure. The default is off.
+ # NOTE: TURNING THIS ON DISABLES ALL DNSSEC SECURITY
+ val-permissive-mode: no
+
+ # Ignore the CD flag in incoming queries and refuse them bogus data.
+ # Enable it if the only clients of unbound are legacy servers (w2008)
+ # that set CD but cannot validate themselves.
+ # ignore-cd-flag: no
+
+ # Have the validator log failed validations for your diagnosis.
+ # 0: off. 1: A line per failed user query. 2: With reason and bad IP.
+ val-log-level: 2
+
+ # It is possible to configure NSEC3 maximum iteration counts per
+ # keysize. Keep this table very short, as linear search is done.
+ # A message with an NSEC3 with larger count is marked insecure.
+ # List in ascending order the keysize and count values.
+ # val-nsec3-keysize-iterations: "1024 150 2048 500 4096 2500"
+
+ # instruct the auto-trust-anchor-file probing to add anchors after ttl.
+ # add-holddown: 2592000 # 30 days
+
+ # instruct the auto-trust-anchor-file probing to del anchors after ttl.
+ # del-holddown: 2592000 # 30 days
+
+ # auto-trust-anchor-file probing removes missing anchors after ttl.
+ # If the value 0 is given, missing anchors are not removed.
+ # keep-missing: 31622400 # 366 days
+
+ # debug option that allows very small holddown times for key rollover,
+ # otherwise the RFC mandates probe intervals must be at least 1 hour.
+ # permit-small-holddown: no
+
+ # the amount of memory to use for the key cache.
+ # plain value in bytes or you can append k, m or G. default is "4Mb".
+ # key-cache-size: 4m
+
+ # the number of slabs to use for the key cache.
+ # the number of slabs must be a power of 2.
+ # more slabs reduce lock contention, but fragment memory usage.
+ # key-cache-slabs: 4
+
+ # the amount of memory to use for the negative cache (used for DLV).
+ # plain value in bytes or you can append k, m or G. default is "1Mb".
+ # neg-cache-size: 1m
+
+ # By default, for a number of zones a small default 'nothing here'
+ # reply is built-in. Query traffic is thus blocked. If you
+ # wish to serve such zone you can unblock them by uncommenting one
+ # of the nodefault statements below.
+ # You may also have to use domain-insecure: zone to make DNSSEC work,
+ # unless you have your own trust anchors for this zone.
+ local-zone: "test." nodefault
+ local-zone: "localhost." nodefault
+ local-zone: "127.in-addr.arpa." nodefault
+ local-zone: "1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.ip6.arpa." nodefault
+ local-zone: "onion." nodefault
+ local-zone: "10.in-addr.arpa." nodefault
+ local-zone: "16.172.in-addr.arpa." nodefault
+ local-zone: "17.172.in-addr.arpa." nodefault
+ local-zone: "18.172.in-addr.arpa." nodefault
+ local-zone: "19.172.in-addr.arpa." nodefault
+ local-zone: "20.172.in-addr.arpa." nodefault
+ local-zone: "21.172.in-addr.arpa." nodefault
+ local-zone: "22.172.in-addr.arpa." nodefault
+ local-zone: "23.172.in-addr.arpa." nodefault
+ local-zone: "24.172.in-addr.arpa." nodefault
+ local-zone: "25.172.in-addr.arpa." nodefault
+ local-zone: "26.172.in-addr.arpa." nodefault
+ local-zone: "27.172.in-addr.arpa." nodefault
+ local-zone: "28.172.in-addr.arpa." nodefault
+ local-zone: "29.172.in-addr.arpa." nodefault
+ local-zone: "30.172.in-addr.arpa." nodefault
+ local-zone: "31.172.in-addr.arpa." nodefault
+ local-zone: "168.192.in-addr.arpa." nodefault
+ local-zone: "0.in-addr.arpa." nodefault
+ local-zone: "254.169.in-addr.arpa." nodefault
+ local-zone: "2.0.192.in-addr.arpa." nodefault
+ local-zone: "100.51.198.in-addr.arpa." nodefault
+ local-zone: "113.0.203.in-addr.arpa." nodefault
+ local-zone: "255.255.255.255.in-addr.arpa." nodefault
+ local-zone: "0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.ip6.arpa." nodefault
+ local-zone: "d.f.ip6.arpa." nodefault
+ local-zone: "8.e.f.ip6.arpa." nodefault
+ local-zone: "9.e.f.ip6.arpa." nodefault
+ local-zone: "a.e.f.ip6.arpa." nodefault
+ local-zone: "b.e.f.ip6.arpa." nodefault
+ local-zone: "8.b.d.0.1.0.0.2.ip6.arpa." nodefault
+ # And for 64.100.in-addr.arpa. to 127.100.in-addr.arpa.
+
+ # If unbound is running service for the local host then it is useful
+ # to perform lan-wide lookups to the upstream, and unblock the
+ # long list of local-zones above. If this unbound is a dns server
+ # for a network of computers, disabled is better and stops information
+ # leakage of local lan information.
+ unblock-lan-zones: yes
+
+ # The insecure-lan-zones option disables validation for
+ # these zones, as if they were all listed as domain-insecure.
+ # insecure-lan-zones: no
+
+ # a number of locally served zones can be configured.
+ # local-zone: <zone> <type>
+ # local-data: "<resource record string>"
+ # o deny serves local data (if any), else, drops queries.
+ # o refuse serves local data (if any), else, replies with error.
+ # o static serves local data, else, nxdomain or nodata answer.
+ # o transparent gives local data, but resolves normally for other names
+ # o redirect serves the zone data for any subdomain in the zone.
+ # o nodefault can be used to normally resolve AS112 zones.
+ # o typetransparent resolves normally for other types and other names
+ # o inform resolves normally, but logs client IP address
+ # o inform_deny drops queries and logs client IP address
+ # o always_transparent, always_refuse, always_nxdomain, resolve in
+ # that way but ignore local data for that name.
+ #
+ # defaults are localhost address, reverse for 127.0.0.1 and ::1
+ # and nxdomain for AS112 zones. If you configure one of these zones
+ # the default content is omitted, or you can omit it with 'nodefault'.
+ #
+ # If you configure local-data without specifying local-zone, by
+ # default a transparent local-zone is created for the data.
+ #
+ # You can add locally served data with
+ # local-zone: "local." static
+ # local-data: "mycomputer.local. IN A 192.0.2.51"
+ # local-data: 'mytext.local TXT "content of text record"'
+ #
+ # You can override certain queries with
+ # local-data: "adserver.example.com A 127.0.0.1"
+ #
+ # You can redirect a domain to a fixed address with
+ # (this makes example.com, www.example.com, etc, all go to 192.0.2.3)
+ # local-zone: "example.com" redirect
+ # local-data: "example.com A 192.0.2.3"
+ #
+ # Shorthand to make PTR records, "IPv4 name" or "IPv6 name".
+ # You can also add PTR records using local-data directly, but then
+ # you need to do the reverse notation yourself.
+ # local-data-ptr: "192.0.2.3 www.example.com"
+
+ #include: /etc/unbound/local.d/*.conf
+
+ # tag a localzone with a list of tag names (in "" with spaces between)
+ # local-zone-tag: "example.com" "tag2 tag3"
+
+ # add a netblock specific override to a localzone, with zone type
+ # local-zone-override: "example.com" 192.0.2.0/24 refuse
+
+ # service clients over SSL (on the TCP sockets), with plain DNS inside
+ # the SSL stream. Give the certificate to use and private key.
+ # default is "" (disabled). requires restart to take effect.
+ # ssl-service-key: "/etc/unbound/unbound_server.key"
+ # ssl-service-pem: "/etc/unbound/unbound_server.pem"
+ # ssl-port: 443
+ #
+ # request upstream over SSL (with plain DNS inside the SSL stream).
+ # Default is no. Can be turned on and off with unbound-control.
+ # ssl-upstream: no
+
+ # DNS64 prefix. Must be specified when DNS64 is use.
+ # Enable dns64 in module-config. Used to synthesize IPv6 from IPv4.
+ # dns64-prefix: 64:ff9b::0/96
+
+ # ratelimit for uncached, new queries, this limits recursion effort.
+ # ratelimiting is experimental, and may help against randomqueryflood.
+ # if 0(default) it is disabled, otherwise state qps allowed per zone.
+ # ratelimit: 0
+
+ # ratelimits are tracked in a cache, size in bytes of cache (or k,m).
+ # ratelimit-size: 4m
+ # ratelimit cache slabs, reduces lock contention if equal to cpucount.
+ # ratelimit-slabs: 4
+
+ # 0 blocks when ratelimited, otherwise let 1/xth traffic through
+ # ratelimit-factor: 10
+
+ # override the ratelimit for a specific domain name.
+ # give this setting multiple times to have multiple overrides.
+ # ratelimit-for-domain: example.com 1000
+ # override the ratelimits for all domains below a domain name
+ # can give this multiple times, the name closest to the zone is used.
+ # ratelimit-below-domain: com 1000
+
+# Python config section. To enable:
+# o use --with-pythonmodule to configure before compiling.
+# o list python in the module-config string (above) to enable.
+# o and give a python-script to run.
+python:
+ # Script file to load
+ # python-script: "/etc/unbound/ubmodule-tst.py"
+
+# Remote control config section.
+remote-control:
+ # Enable remote control with unbound-control(8) here.
+ # set up the keys and certificates with unbound-control-setup.
+ # Note: required for unbound-munin package
+ control-enable: no
+
+ # Set to no and use an absolute path as control-interface to use
+ # a unix local named pipe for unbound-control.
+ # control-use-cert: yes
+
+ # what interfaces are listened to for remote control.
+ # give 0.0.0.0 and ::0 to listen to all interfaces.
+ # control-interface: 127.0.0.1
+ # control-interface: ::1
+
+ # port number for remote control operations.
+ # control-port: 8953
+
+ # unbound server key file.
+ #server-key-file: "/etc/unbound/unbound_server.key"
+
+ # unbound server certificate file.
+ #server-cert-file: "/etc/unbound/unbound_server.pem"
+
+ # unbound-control key file.
+ #control-key-file: "/etc/unbound/unbound_control.key"
+
+ # unbound-control certificate file.
+ #control-cert-file: "/etc/unbound/unbound_control.pem"
+
+# Stub and Forward zones
+#include: /etc/unbound/conf.d/*.conf
+
+# Stub zones.
+# Create entries like below, to make all queries for 'example.com' and
+# 'example.org' go to the given list of nameservers. list zero or more
+# nameservers by hostname or by ipaddress. If you set stub-prime to yes,
+# the list is treated as priming hints (default is no).
+# With stub-first yes, it attempts without the stub if it fails.
+# Consider adding domain-insecure: name and local-zone: name nodefault
+# to the server: section if the stub is a locally served zone.
+# stub-zone:
+# name: "example.com"
+# stub-addr: 192.0.2.68
+# stub-prime: no
+# stub-first: no
+# stub-zone:
+# name: "example.org"
+# stub-host: ns.example.com.
+
+# You can now also dynamically create and delete stub-zone's using
+# unbound-control stub_add domain.com 1.2.3.4 5.6.7.8
+# unbound-control stub_remove domain.com 1.2.3.4 5.6.7.8
+
+# Forward zones
+# Create entries like below, to make all queries for 'example.com' and
+# 'example.org' go to the given list of servers. These servers have to handle
+# recursion to other nameservers. List zero or more nameservers by hostname
+# or by ipaddress. Use an entry with name "." to forward all queries.
+# If you enable forward-first, it attempts without the forward if it fails.
+
+{% if FORWARD_ADDR %}
+forward-zone:
+ name: "."
+ forward-addr: {{FORWARD_ADDR}}
+ forward-first: no
+{% endif %}
+
+# forward-zone:
+# name: "example.com"
+# forward-addr: 192.0.2.68
+# forward-addr: 192.0.2.73@5355 # forward to port 5355.
+# forward-first: no
+# forward-zone:
+# name: "example.org"
+# forward-host: fwd.example.com
+#
+# You can now also dynamically create and delete forward-zone's using
+# unbound-control forward_add domain.com 1.2.3.4 5.6.7.8
+# unbound-control forward_remove domain.com 1.2.3.4 5.6.7.8