.. SPDX-License-Identifier: GPL-3.0-or-later .. _build: Building from sources ===================== .. note:: Latest up-to-date packages for various distribution can be obtained from web ``_. Knot Resolver is written for UNIX-like systems using modern C standards. Beware that some 64-bit systems with LuaJIT 2.1 may be affected by `a problem `_ -- Linux on x86_64 is unaffected but `Linux on aarch64 is `_. .. code-block:: bash $ git clone --recursive https://gitlab.nic.cz/knot/knot-resolver.git Dependencies ------------ .. note:: This section lists basic requirements. Individual modules might have additional build or runtime dependencies. The following dependencies are needed to build and run Knot Resolver: .. csv-table:: :header: "Requirement", "Notes" "ninja", "*build only*" "meson >= 0.49", "*build only* [#]_" "C and C++ compiler", "*build only* [#]_" "`pkg-config`_", "*build only* [#]_" "libknot_ 3.0.2+", "Knot DNS libraries" "LuaJIT_ 2.0+", "Embedded scripting language" "libuv_ 1.7+", "Multiplatform I/O and services" "lmdb", "Memory-mapped database for cache" "GnuTLS", "TLS" There are also *optional* packages that enable specific functionality in Knot Resolver: .. TODO cqueues is really used on multiple places, sometimes indirectly .. csv-table:: :header: "Optional", "Needed for", "Notes" "jemalloc_", "``daemon``", "Improve long-term memory consumption." "nghttp2_", "``daemon``", "DNS over HTTPS support." "libsystemd_", "``daemon``", "Systemd watchdog support." "`libcap-ng`_", "``daemon``", "Linux capabilities: support dropping them." "`lua-basexx`_", "``config tests``", "Number base encoding/decoding for Lua." "`lua-http`_", "``modules/http``", "HTTP/2 client/server for Lua." "`lua-cqueues`_", "some lua modules", "" "cmocka_", "``unit tests``", "Unit testing framework." "dnsdist_", "``proxyv2 test``", "DNS proxy server" "Doxygen_", "``documentation``", "Generating API documentation." "Sphinx_ and sphinx_rtd_theme_", "``documentation``", "Building this documentation." "Texinfo_", "``documentation``", "Generating this documentation in Info format." "breathe_", "``documentation``", "Exposing Doxygen API doc to Sphinx." "libprotobuf_ 3.0+", "``modules/dnstap``", "Protocol Buffers support for dnstap_." "`libprotobuf-c`_ 1.0+", "``modules/dnstap``", "C bindings for Protobuf." "libfstrm_ 0.2+", "``modules/dnstap``", "Frame Streams data transport protocol." "luacheck_", "``lint-lua``", "Syntax and static analysis checker for Lua." "`clang-tidy`_", "``lint-c``", "Syntax and static analysis checker for C." "luacov_", "``check-config``", "Code coverage analysis for Lua modules." .. [#] If ``meson >= 0.49`` isn't available for your distro, check backports repository or use python pip to install it. .. [#] Requires ``__attribute__((cleanup))`` and ``-MMD -MP`` for dependency file generation. We test GCC and Clang, and ICC is likely to work as well. .. [#] You can use variables ``_CFLAGS`` and ``_LIBS`` to configure dependencies manually (i.e. ``libknot_CFLAGS`` and ``libknot_LIBS``). Packaged dependencies ~~~~~~~~~~~~~~~~~~~~~ .. note:: Some build dependencies can be found in `home:CZ-NIC:knot-resolver-build `_. On reasonably new systems most of the dependencies can be resolved from packages, here's an overview for several platforms. * **Debian/Ubuntu** - Current stable doesn't have new enough Meson and libknot. Use repository above or build them yourself. Fresh list of dependencies can be found in `Debian control file in our repo `_, search for "Build-Depends". * **CentOS/Fedora/RHEL/openSUSE** - Fresh list of dependencies can be found in `RPM spec file in our repo `_, search for "BuildRequires". * **FreeBSD** - when installing from ports, all dependencies will install automatically, corresponding to the selected options. * **Mac OS X** - the dependencies can be obtained from `Homebrew formula `_. Compilation ----------- .. note:: Knot Resolver uses `Meson Build system `_. Shell snippets below should be sufficient for basic usage but users unfamiliar with Meson Build might want to read introductory article `Using Meson `_. Following example script will: - create new build directory named ``build_dir`` - configure installation path ``/tmp/kr`` - enable static build (to allow installation to non-standard path) - build Knot Resolver - install it into the previously configured path .. code-block:: bash $ meson setup build_dir --prefix=/tmp/kr --default-library=static $ ninja -C build_dir $ ninja install -C build_dir At this point you can execute the newly installed binary using path ``/tmp/kr/sbin/kresd``. .. note:: When compiling on OS X, creating a shared library is currently not possible when using luajit package from Homebrew due to `#37169 `_. Build options ~~~~~~~~~~~~~ It's possible to change the compilation with build options. These are useful to packagers or developers who wish to customize the daemon behaviour, run extended test suites etc. By default, these are all set to sensible values. For complete list of build options create a build directory and run: .. code-block:: bash $ meson setup build_dir $ meson configure build_dir To customize project build options, use ``-Doption=value`` when creating a build directory: .. code-block:: bash $ meson setup build_dir -Ddoc=enabled ... or change options in an already existing build directory: .. code-block:: bash $ meson configure build_dir -Ddoc=enabled .. _build-custom-flags: Customizing compiler flags ~~~~~~~~~~~~~~~~~~~~~~~~~~ If you'd like to use customize the build, see meson's `built-in options `_. For hardening, see ``b_pie``. For complete control over the build flags, use ``--buildtype=plain`` and set ``CFLAGS``, ``LDFLAGS`` when creating the build directory with ``meson`` command. .. include:: ../tests/README.rst .. _build-html-doc: Documentation ------------- To check for documentation dependencies and allow its installation, use ``-Ddoc=enabled``. The documentation doesn't build automatically. Instead, target ``doc`` must be called explicitly. .. code-block:: bash $ meson configure build_dir -Ddoc=enabled $ ninja -C build_dir doc Tarball ------- Released tarballs are available from ``_ To make a release tarball from git, use the following command. The .. code-block:: bash $ ninja -C build_dir dist It's also possible to make a development snapshot tarball: .. code-block:: bash $ ./scripts/make-archive.sh .. _packaging: Packaging --------- Recommended build options for packagers: * ``--buildtype=release`` for default flags (optimization, asserts, ...). For complete control over flags, use ``plain`` and see :ref:`build-custom-flags`. * ``--prefix=/usr`` to customize prefix, other directories can be set in a similar fashion, see ``meson setup --help`` * ``-Dsystemd_files=enabled`` for systemd unit files * ``-Ddoc=enabled`` for offline documentation (see :ref:`build-html-doc`) * ``-Dinstall_kresd_conf=enabled`` to install default config file * ``-Dclient=enabled`` to force build of kresc * ``-Dunit_tests=enabled`` to force build of unit tests Systemd ~~~~~~~ It's recommended to use the upstream system unit files. If any customizations are required, drop-in files should be used, instead of patching/changing the unit files themselves. To install systemd unit files, use the ``-Dsystemd_files=enabled`` build option. To support enabling services after boot, you must also link ``kresd.target`` to ``multi-user.target.wants``: .. code-block:: bash ln -s ../kresd.target /usr/lib/systemd/system/multi-user.target.wants/kresd.target Trust anchors ~~~~~~~~~~~~~ If the target distro has externally managed (read-only) DNSSEC trust anchors or root hints use this: * ``-Dkeyfile_default=/usr/share/dns/root.key`` * ``-Droot_hints=/usr/share/dns/root.hints`` * ``-Dmanaged_ta=disabled`` In case you want to have automatically managed DNSSEC trust anchors instead, set ``-Dmanaged_ta=enabled`` and make sure both ``keyfile_default`` file and its parent directories are writable by kresd process (after package installation!). Docker image ------------ Visit `hub.docker.com/r/cznic/knot-resolver `_ for instructions how to run the container. For development, it's possible to build the container directly from your git tree: .. code-block:: bash $ docker build -t knot-resolver . .. _jemalloc: https://jemalloc.net .. _libuv: https://github.com/libuv/libuv .. _LuaJIT: http://luajit.org/luajit.html .. _Doxygen: https://www.doxygen.nl/manual/index.html .. _breathe: https://github.com/michaeljones/breathe .. _Sphinx: http://sphinx-doc.org/ .. _sphinx_rtd_theme: https://pypi.python.org/pypi/sphinx_rtd_theme .. _Texinfo: https://www.gnu.org/software/texinfo/ .. _pkg-config: https://www.freedesktop.org/wiki/Software/pkg-config/ .. _libknot: https://gitlab.nic.cz/knot/knot-dns .. _cmocka: https://cmocka.org/ .. _dnsdist: https://dnsdist.org/ .. _lua-basexx: https://github.com/aiq/basexx .. _lua-http: https://luarocks.org/modules/daurnimator/http .. _lua-cqueues: https://25thandclement.com/~william/projects/cqueues.html .. _deckard: https://gitlab.nic.cz/knot/deckard .. _nghttp2: https://nghttp2.org/ .. _libsystemd: https://www.freedesktop.org/wiki/Software/systemd/ .. _`libcap-ng`: https://people.redhat.com/sgrubb/libcap-ng/ .. _dnstap: http://dnstap.info/ .. _libprotobuf: https://developers.google.com/protocol-buffers/ .. _libprotobuf-c: https://github.com/protobuf-c/protobuf-c/wiki .. _libfstrm: https://github.com/farsightsec/fstrm .. _luacheck: http://luacheck.readthedocs.io .. _clang-tidy: http://clang.llvm.org/extra/clang-tidy/index.html .. _luacov: https://lunarmodules.github.io/luacov/ .. _lcov: http://ltp.sourceforge.net/coverage/lcov.php