diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-07 09:06:44 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-07 09:06:44 +0000 |
commit | ed5640d8b587fbcfed7dd7967f3de04b37a76f26 (patch) | |
tree | 7a5f7c6c9d02226d7471cb3cc8fbbf631b415303 /offapi/com/sun/star/chart2/data/XDatabaseDataProvider.idl | |
parent | Initial commit. (diff) | |
download | libreoffice-upstream.tar.xz libreoffice-upstream.zip |
Adding upstream version 4:7.4.7.upstream/4%7.4.7upstream
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to '')
-rw-r--r-- | offapi/com/sun/star/chart2/data/XDatabaseDataProvider.idl | 206 |
1 files changed, 206 insertions, 0 deletions
diff --git a/offapi/com/sun/star/chart2/data/XDatabaseDataProvider.idl b/offapi/com/sun/star/chart2/data/XDatabaseDataProvider.idl new file mode 100644 index 000000000..c8c0bcafb --- /dev/null +++ b/offapi/com/sun/star/chart2/data/XDatabaseDataProvider.idl @@ -0,0 +1,206 @@ +/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ +/* + * This file is part of the LibreOffice project. + * + * This Source Code Form is subject to the terms of the Mozilla Public + * License, v. 2.0. If a copy of the MPL was not distributed with this + * file, You can obtain one at http://mozilla.org/MPL/2.0/. + * + * This file incorporates work covered by the following license notice: + * + * Licensed to the Apache Software Foundation (ASF) under one or more + * contributor license agreements. See the NOTICE file distributed + * with this work for additional information regarding copyright + * ownership. The ASF licenses this file to you under the Apache + * License, Version 2.0 (the "License"); you may not use this file + * except in compliance with the License. You may obtain a copy of + * the License at http://www.apache.org/licenses/LICENSE-2.0 . + */ +#ifndef __com_sun_star_chart2_data_XDatabaseDataProvider_idl__ +#define __com_sun_star_chart2_data_XDatabaseDataProvider_idl__ + +#include <com/sun/star/container/NoSuchElementException.idl> +#include <com/sun/star/beans/XPropertySet.idl> +#include <com/sun/star/beans/UnknownPropertyException.idl> +#include <com/sun/star/lang/XInitialization.idl> +#include <com/sun/star/lang/XComponent.idl> +#include <com/sun/star/sdbc/XConnection.idl> +#include <com/sun/star/sdbc/XParameters.idl> +#include <com/sun/star/sdbc/XRowSet.idl> +#include <com/sun/star/chart2/data/XDataProvider.idl> +#include <com/sun/star/chart2/data/XRangeXMLConversion.idl> + + + module com { module sun { module star { module chart2 { module data { + + +/** identifies a XDataProvider for result sets. + + @see XDataProvider + @see DataProvider + */ +interface XDatabaseDataProvider +{ + /** For accessing data a component provides for being used by + charts. + */ + interface XDataProvider; + + /** allows you to convert the ranges a data provider deals with + internally into valid XML. + */ + interface XRangeXMLConversion; + + /** allows access to the properties of the instance. + */ + interface com::sun::star::lang::XInitialization; + + /** allows life-time control of the database data provider. + */ + interface com::sun::star::lang::XComponent; + + /** allows access to the properties of the instance. + */ + interface com::sun::star::beans::XPropertySet; + + interface com::sun::star::sdbc::XParameters; + interface com::sun::star::sdbc::XRowSet; + + /** is used for subreports and contains the names of columns of the parent report. + <p> These columns are typically the foreign key fields of the parent report. + The values of these columns are used to identify the data for the subreport. + Each time the parent report changes its current row, the subreport requeries + it's data based on the values of the master fields.</p> + <p>If the report is no sub report (e.g. its parent is not a report itself), this + property is not evaluated.</p> + + */ + [attribute,bound] sequence<string> MasterFields; + + /**is used for subreports and contains the names of the columns of the subreport + which are related to the master fields of the parent report. + <p>Entries in this sequence can either denote column names in the sub report, + or parameter names.<br/> + For instance, you could base the report on the SQL statement + <code>SELECT * FROM invoices WHERE cust_ref = :cid</code>, and add <code>cid</code> + to the DetailFields property. In this case, the parameter will be filled from + the corresponding master field.<br/> + Alternatively, you could simply base your report on the table <code>invoices</code>, + and add the column name <code>cust_ref</code> to the DetailFields. In this case, + and implicit filter clause <code>WHERE cust_ref = :<new_param_name></code> will + be created, and the artificial parameter will be filled from the corresponding + master field.<br/> + If a string in this property denotes both a column name and a parameter name, it + is undefined which way it is interpreted, but implementations of the service are required + to either decide for the parameter or the column, and proceed as usual. + </p> + <p>The columns specified herein typically represent a part of the primary key + fields or their aliases of the detail report.</p> + <p>If the report is no sub report (e.g. its parent is not a report itself), this + property is not evaluated.</p> + * + */ + [attribute,bound] sequence<string> DetailFields; + + /** is the command which should be executed, the type of command depends + on the CommandType. + <p>In case of a #CommandType of CommandType::COMMAND, + means in case the #Command specifies an SQL statement, the inherited + com::sun::star::sdbc::RowSet::EscapeProcessing + becomes relevant:<br/> + It then can be to used to specify whether the SQL statement should be analyzed on the + client side before sending it to the database server.<br/> + The default value for com::sun::star::sdbc::RowSet::EscapeProcessing + is `TRUE`. By switching it to `FALSE`, you can pass backend-specific SQL statements, + which are not standard SQL, to your database.</p> + + + @see com::sun::star::sdb::CommandType + */ + [attribute,bound] string Command; + + /** specifies the type of the command to be executed to retrieve a result set. + + <p>#Command needs to be interpreted depending on the value of this property.</p> + + <p>This property is only meaningful together with the #Command + property, thus either <em>both</em> or <em>none</em> of them are present.</p> + + @see com::sun::star::sdb::CommandType + */ + [attribute,bound] long CommandType; + + /** specifies an additional filter to optionally use. + + <p>The Filter string has to form a SQL WHERE-clause, <em>without</em> the WHERE-string itself.</p> + + <p>If a #DataSourceName, #Command and #CommandType + are specified, a RowSet can be created with this information. If the results provided by the + row set are to be additionally filtered, the Filter property can be used.</p> + + <p>Note that the Filter property does not make sense if a resultSet has been specified + in the DataAccessDescriptor.</p> + + @see com::sun::star::sdb::RowSet + @see ResultSet + */ + [attribute,bound] string Filter; + + /** indicates whether the filter should be applied or not, + default is `FALSE`. + */ + [attribute,bound] boolean ApplyFilter; + + /** additional having clause for the row set + */ + [attribute,bound] string HavingClause + { + set raises (com::sun::star::beans::UnknownPropertyException); + }; + + /** additional group by for the row set + */ + [attribute,bound] string GroupBy + { + set raises (com::sun::star::beans::UnknownPropertyException); + }; + + /** is an additional sort order definition for a row set. + */ + [attribute,bound] string Order; + + /** specifies if the #Command should be analyzed on the client side before sending it + to the database server. + + <p>The default value of this property is `TRUE`. By switching it to `FALSE`, you can pass + backend-specific SQL statements, which are not standard SQL, to your database.</p> + + <p>This property is usually present together with the #Command and + #CommandType properties, and is evaluated if and only if #CommandType + equals CommandType::COMMAND.</p> + */ + [attribute,bound] boolean EscapeProcessing; + + /** specifies the maximal count of rows which should be fetched. + <p>A value of zero implies that no limit exists.</p> + */ + [attribute,bound] long RowLimit; + + /** specifies the active connection which is used to create the resulting report. + */ + [attribute,bound] com::sun::star::sdbc::XConnection ActiveConnection + { + set raises (com::sun::star::lang::IllegalArgumentException); + }; + /** is the name of the data source to use, this could be a named data source + or the URL of a data access component. + */ + [attribute,bound] string DataSourceName; +}; + + + }; }; }; }; }; + +#endif + +/* vim:set shiftwidth=4 softtabstop=4 expandtab: */ |