Adding upstream version 4:7.4.7.upstream/4%7.4.7upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1701 insertions, 0 deletions

diff --git a/sd/source/ui/view/drviewse.cxx b/sd/source/ui/view/drviewse.cxx
new file mode 100644
index 000000000..309eb2b85
--- /dev/null
+++ b/sd/source/ui/view/drviewse.cxx
@@ -0,0 +1,1701 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+#include <config_features.h>
+
+#include <com/sun/star/presentation/XPresentation2.hpp>
+#include <com/sun/star/form/FormButtonType.hpp>
+#include <com/sun/star/beans/XPropertySet.hpp>
+#include <i18nutil/unicode.hxx>
+#include <i18nutil/transliteration.hxx>
+#include <com/sun/star/beans/PropertyValue.hpp>
+#include <com/sun/star/uno/Any.hxx>
+
+#include <LibreOfficeKit/LibreOfficeKitEnums.h>
+#include <comphelper/lok.hxx>
+#include <comphelper/propertyvalue.hxx>
+#include <editeng/editstat.hxx>
+#include <editeng/outlobj.hxx>
+#include <vcl/svapp.hxx>
+#include <vcl/weld.hxx>
+#include <svl/urlbmk.hxx>
+#include <svx/clipfmtitem.hxx>
+#include <svx/svdpagv.hxx>
+#include <svx/svdopath.hxx>
+#include <svx/svdundo.hxx>
+#include <svx/svdorect.hxx>
+#include <svl/eitem.hxx>
+#include <svl/intitem.hxx>
+#include <svl/poolitem.hxx>
+#include <svl/stritem.hxx>
+#include <editeng/eeitem.hxx>
+#include <sfx2/dispatch.hxx>
+#include <sfx2/viewfrm.hxx>
+#include <sfx2/request.hxx>
+#include <svx/svxids.hrc>
+#include <editeng/flditem.hxx>
+#include <svx/obj3d.hxx>
+#include <svx/svdobjkind.hxx>
+#include <svx/svdouno.hxx>
+#include <svx/dataaccessdescriptor.hxx>
+#include <tools/urlobj.hxx>
+#include <sfx2/ipclient.hxx>
+#include <avmedia/mediawindow.hxx>
+#include <svl/urihelper.hxx>
+#include <sfx2/docfile.hxx>
+#include <sfx2/notebookbar/SfxNotebookBar.hxx>
+#include <osl/diagnose.h>
+
+#include <DrawViewShell.hxx>
+#include <slideshow.hxx>
+#include <ViewShellHint.hxx>
+#include <framework/FrameworkHelper.hxx>
+#include <app.hrc>
+#include <strings.hrc>
+
+#include <drawdoc.hxx>
+#include <fusel.hxx>
+#include <futext.hxx>
+#include <fuconrec.hxx>
+#include <fuconcs.hxx>
+#include <fuconuno.hxx>
+#include <fuconbez.hxx>
+#include <fuediglu.hxx>
+#include <fuconarc.hxx>
+#include <fucon3d.hxx>
+#include <sdresid.hxx>
+#include <unokywds.hxx>
+#include <Outliner.hxx>
+#include <sdpage.hxx>
+#include <FrameView.hxx>
+#include <zoomlist.hxx>
+#include <drawview.hxx>
+#include <DrawDocShell.hxx>
+#include <ViewShellBase.hxx>
+#include <ToolBarManager.hxx>
+#include <anminfo.hxx>
+#include <optsitem.hxx>
+#include <Window.hxx>
+#include <fuformatpaintbrush.hxx>
+#include <fuzoom.hxx>
+#include <sdmod.hxx>
+
+using namespace ::com::sun::star;
+using namespace ::com::sun::star::uno;
+using namespace ::com::sun::star::presentation;
+using namespace ::com::sun::star::beans;
+
+namespace sd {
+
+// Permanent Functions
+
+static void ImpAddPrintableCharactersToTextEdit(SfxRequest const & rReq, ::sd::View* pView)
+{
+    // evtl. feed characters to activated textedit
+    const SfxItemSet* pSet = rReq.GetArgs();
+
+    if(!pSet)
+        return;
+
+    OUString aInputString;
+
+    if(SfxItemState::SET == pSet->GetItemState(SID_ATTR_CHAR))
+        aInputString = static_cast<const SfxStringItem&>(pSet->Get(SID_ATTR_CHAR)).GetValue();
+
+    if(aInputString.isEmpty())
+        return;
+
+    OutlinerView* pOLV = pView->GetTextEditOutlinerView();
+
+    if(pOLV)
+    {
+        for(sal_Int32 a(0); a < aInputString.getLength(); a++)
+        {
+            vcl::KeyCode aKeyCode;
+            // tdf#38669 - create the key event using a Unicode character
+            KeyEvent aKeyEvent(aInputString[a], aKeyCode);
+
+            // add actual character
+            pOLV->PostKeyEvent(aKeyEvent);
+        }
+    }
+}
+
+void DrawViewShell::FuPermanent(SfxRequest& rReq)
+{
+    // We do not execute a thing during a native slide show
+
+    if (SlideShow::IsRunning(GetViewShellBase()))
+        return;
+
+    sal_uInt16 nSId = rReq.GetSlot();
+
+    if( HasCurrentFunction() &&
+        ( nSId == SID_TEXTEDIT || nSId == SID_ATTR_CHAR || nSId == SID_TEXT_FITTOSIZE ||
+          nSId == SID_ATTR_CHAR_VERTICAL || nSId == SID_TEXT_FITTOSIZE_VERTICAL ) )
+    {
+        rtl::Reference<FuPoor> xFunc( GetCurrentFunction() );
+
+        FuText* pFuText = dynamic_cast< FuText* >( xFunc.get() );
+
+        if( pFuText )
+        {
+            pFuText->SetPermanent(true);
+            xFunc->ReceiveRequest( rReq );
+
+            Invalidate();
+
+            // evtl. feed characters to activated textedit
+            if(SID_ATTR_CHAR == nSId && GetView() && GetView()->IsTextEdit())
+                ImpAddPrintableCharactersToTextEdit(rReq, GetView());
+
+            rReq.Done();
+            return;
+        }
+    }
+
+    CheckLineTo (rReq);
+    sal_uInt16 nOldSId = 0;
+    bool bPermanent = false;
+
+    if( !mpDrawView )
+        return;
+
+    if(HasCurrentFunction())
+    {
+        if( (nSId == SID_FORMATPAINTBRUSH) && (GetCurrentFunction()->GetSlotID() == SID_TEXTEDIT) )
+        {
+            // save text edit mode for format paintbrush!
+            SetOldFunction( GetCurrentFunction() );
+        }
+        else
+        {
+            if(GetOldFunction() == GetCurrentFunction())
+            {
+                SetOldFunction(nullptr);
+            }
+        }
+
+        if ( nSId != SID_TEXTEDIT && nSId != SID_ATTR_CHAR && nSId != SID_TEXT_FITTOSIZE &&
+             nSId != SID_ATTR_CHAR_VERTICAL && nSId != SID_TEXT_FITTOSIZE_VERTICAL &&
+             nSId != SID_FORMATPAINTBRUSH &&
+             mpDrawView->IsTextEdit() )
+        {
+            mpDrawView->SdrEndTextEdit();
+        }
+
+        if( HasCurrentFunction() )
+        {
+            nOldSId = GetCurrentFunction()->GetSlotID();
+
+            if (nOldSId == nSId ||
+                ((nOldSId == SID_TEXTEDIT || nOldSId == SID_ATTR_CHAR || nOldSId == SID_TEXT_FITTOSIZE ||
+                nOldSId == SID_ATTR_CHAR_VERTICAL || nOldSId == SID_TEXT_FITTOSIZE_VERTICAL) &&
+                (nSId == SID_TEXTEDIT || nSId == SID_ATTR_CHAR || nSId == SID_TEXT_FITTOSIZE ||
+                nSId == SID_ATTR_CHAR_VERTICAL || nSId == SID_TEXT_FITTOSIZE_VERTICAL )))
+            {
+                bPermanent = true;
+            }
+
+            GetCurrentFunction()->Deactivate();
+        }
+
+        SetCurrentFunction(nullptr);
+
+        SfxBindings& rBind = GetViewFrame()->GetBindings();
+        rBind.Invalidate(nOldSId);
+        rBind.Update(nOldSId);
+    }
+
+    // for LibreOfficeKit - choosing a shape should construct it directly
+    bool bCreateDirectly = false;
+
+    switch ( nSId )
+    {
+        case SID_TEXTEDIT:  // BASIC ???
+        case SID_ATTR_CHAR:
+        case SID_ATTR_CHAR_VERTICAL:
+        case SID_TEXT_FITTOSIZE:
+        case SID_TEXT_FITTOSIZE_VERTICAL:
+        {
+            SetCurrentFunction( FuText::Create(this, GetActiveWindow(), mpDrawView.get(), GetDoc(), rReq) );
+            GetCurrentFunction()->DoExecute(rReq);
+
+            SfxBindings& rBindings = GetViewFrame()->GetBindings();
+            rBindings.Invalidate( SID_ATTR_CHAR );
+            rBindings.Invalidate( SID_ATTR_CHAR_VERTICAL );
+            rBindings.Invalidate( SID_TEXT_FITTOSIZE );
+            rBindings.Invalidate( SID_TEXT_FITTOSIZE_VERTICAL );
+
+            // evtl. feed characters to activated textedit
+            if(SID_ATTR_CHAR == nSId && GetView() && GetView()->IsTextEdit())
+                ImpAddPrintableCharactersToTextEdit(rReq, GetView());
+
+            rReq.Done();
+
+            const SfxItemSet* pArgs = rReq.GetArgs();
+            if (pArgs && pArgs->HasItem(FN_PARAM_1))
+                bCreateDirectly = static_cast<const SfxBoolItem&>(pArgs->Get(FN_PARAM_1)).GetValue();
+        }
+        break;
+
+        case SID_FM_CREATE_CONTROL:
+        {
+            SetCurrentFunction( FuConstructUnoControl::Create( this, GetActiveWindow(), mpDrawView.get(), GetDoc(), rReq, bPermanent ) );
+            rReq.Done();
+        }
+        break;
+
+        case SID_FM_CREATE_FIELDCONTROL:
+        {
+            const SfxUnoAnyItem* pDescriptorItem = rReq.GetArg<SfxUnoAnyItem>(SID_FM_DATACCESS_DESCRIPTOR);
+            DBG_ASSERT( pDescriptorItem, "DrawViewShell::FuPermanent(SID_FM_CREATE_FIELDCONTROL): invalid request args!" );
+
+            if(pDescriptorItem)
+            {
+                // get the form view
+                FmFormView* pFormView = mpDrawView.get();
+                SdrPageView* pPageView = pFormView ? pFormView->GetSdrPageView() : nullptr;
+
+                if(pPageView)
+                {
+                    svx::ODataAccessDescriptor aDescriptor(pDescriptorItem->GetValue());
+                    SdrObjectUniquePtr pNewDBField = pFormView->CreateFieldControl(aDescriptor);
+
+                    if(pNewDBField)
+                    {
+                        ::tools::Rectangle aVisArea = GetActiveWindow()->PixelToLogic(::tools::Rectangle(Point(0,0), GetActiveWindow()->GetOutputSizePixel()));
+                        Point aObjPos(aVisArea.Center());
+                        Size aObjSize(pNewDBField->GetLogicRect().GetSize());
+                        aObjPos.AdjustX( -(aObjSize.Width() / 2) );
+                        aObjPos.AdjustY( -(aObjSize.Height() / 2) );
+                        ::tools::Rectangle aNewObjectRectangle(aObjPos, aObjSize);
+
+                        pNewDBField->SetLogicRect(aNewObjectRectangle);
+
+                        GetView()->InsertObjectAtView(pNewDBField.release(), *pPageView);
+                    }
+                }
+            }
+            rReq.Done();
+        }
+        break;
+
+        case SID_OBJECT_SELECT:
+        case SID_OBJECT_ROTATE:
+        case SID_OBJECT_MIRROR:
+        case SID_OBJECT_CROP:
+        case SID_OBJECT_TRANSPARENCE:
+        case SID_OBJECT_GRADIENT:
+        case SID_OBJECT_SHEAR:
+        case SID_OBJECT_CROOK_ROTATE:
+        case SID_OBJECT_CROOK_SLANT:
+        case SID_OBJECT_CROOK_STRETCH:
+        case SID_CONVERT_TO_3D_LATHE:
+        {
+            sal_uInt16 nSlotId = rReq.GetSlot();
+
+            // toggle function
+            if( nOldSId == nSlotId )
+            {
+                nSlotId = SID_OBJECT_SELECT;
+                rReq.SetSlot( nSlotId );
+            }
+
+            if (nSlotId == SID_OBJECT_CROOK_ROTATE ||
+                nSlotId == SID_OBJECT_CROOK_SLANT ||
+                nSlotId == SID_OBJECT_CROOK_STRETCH)
+            {
+                if ( mpDrawView->GetMarkedObjectList().GetMarkCount() > 0 &&
+                    !mpDrawView->IsCrookAllowed( mpDrawView->IsCrookNoContortion() ) )
+                {
+                    if ( mpDrawView->IsPresObjSelected() )
+                    {
+                        std::unique_ptr<weld::MessageDialog> xInfoBox(Application::CreateMessageDialog(GetFrameWeld(),
+                                                                      VclMessageType::Info, VclButtonsType::Ok,
+                                                                      SdResId(STR_ACTION_NOTPOSSIBLE)));
+                        xInfoBox->run();
+                    }
+                    else
+                    {
+                        std::unique_ptr<weld::MessageDialog> xQueryBox(Application::CreateMessageDialog(GetFrameWeld(),
+                                                                       VclMessageType::Question, VclButtonsType::YesNo,
+                                                                       SdResId(STR_ASK_FOR_CONVERT_TO_BEZIER)));
+                        if (xQueryBox->run() == RET_YES )
+                        {
+                            // implicit transformation into bezier
+                            weld::WaitObject aWait(GetFrameWeld());
+                            mpDrawView->ConvertMarkedToPathObj(false);
+                        }
+                    }
+                }
+            }
+            else if (nSlotId == SID_OBJECT_SHEAR)
+            {
+                size_t i = 0;
+                const SdrMarkList& rMarkList = mpDrawView->GetMarkedObjectList();
+                const size_t nMarkCnt = rMarkList.GetMarkCount();
+                bool b3DObjMarked = false;
+
+                while (i < nMarkCnt && !b3DObjMarked)
+                {
+                    if (nullptr != dynamic_cast< E3dObject *>( rMarkList.GetMark(i)->GetMarkedSdrObj() ))
+                    {
+                        b3DObjMarked = true;
+                    }
+                    else
+                    {
+                        i++;
+                    }
+                }
+
+                if ( nMarkCnt > 0 && !b3DObjMarked &&
+                     (!mpDrawView->IsShearAllowed() || !mpDrawView->IsDistortAllowed()) )
+                {
+                    if ( mpDrawView->IsPresObjSelected() )
+                    {
+                        std::unique_ptr<weld::MessageDialog> xInfoBox(Application::CreateMessageDialog(GetFrameWeld(),
+                                                                      VclMessageType::Info, VclButtonsType::Ok,
+                                                                      SdResId(STR_ACTION_NOTPOSSIBLE)));
+                        xInfoBox->run();
+                    }
+                    else
+                    {
+                        std::unique_ptr<weld::MessageDialog> xQueryBox(Application::CreateMessageDialog(GetFrameWeld(),
+                                                                       VclMessageType::Question, VclButtonsType::YesNo,
+                                                                       SdResId(STR_ASK_FOR_CONVERT_TO_BEZIER)));
+                        if (xQueryBox->run() == RET_YES)
+                        {
+                            // implicit transformation into bezier
+                            weld::WaitObject aWait(GetFrameWeld());
+                            mpDrawView->ConvertMarkedToPathObj(false);
+                        }
+                    }
+                }
+            }
+
+            SetCurrentFunction( FuSelection::Create(this, GetActiveWindow(), mpDrawView.get(), GetDoc(), rReq) );
+            rReq.Done();
+            Invalidate( SID_OBJECT_SELECT );
+        }
+        break;
+
+        case SID_DRAW_LINE:
+        case SID_DRAW_XLINE:
+        case SID_DRAW_MEASURELINE:
+        case SID_LINE_ARROW_START:
+        case SID_LINE_ARROW_END:
+        case SID_LINE_ARROWS:
+        case SID_LINE_ARROW_CIRCLE:
+        case SID_LINE_CIRCLE_ARROW:
+        case SID_LINE_ARROW_SQUARE:
+        case SID_LINE_SQUARE_ARROW:
+
+        case SID_DRAW_RECT:
+        case SID_DRAW_RECT_NOFILL:
+        case SID_DRAW_RECT_ROUND:
+        case SID_DRAW_RECT_ROUND_NOFILL:
+        case SID_DRAW_SQUARE:
+        case SID_DRAW_SQUARE_NOFILL:
+        case SID_DRAW_SQUARE_ROUND:
+        case SID_DRAW_SQUARE_ROUND_NOFILL:
+        case SID_DRAW_ELLIPSE:
+        case SID_DRAW_ELLIPSE_NOFILL:
+        case SID_DRAW_CIRCLE:
+        case SID_DRAW_CIRCLE_NOFILL:
+        case SID_DRAW_CAPTION:
+        case SID_DRAW_CAPTION_VERTICAL:
+        case SID_TOOL_CONNECTOR:
+        case SID_CONNECTOR_ARROW_START:
+        case SID_CONNECTOR_ARROW_END:
+        case SID_CONNECTOR_ARROWS:
+        case SID_CONNECTOR_CIRCLE_START:
+        case SID_CONNECTOR_CIRCLE_END:
+        case SID_CONNECTOR_CIRCLES:
+        case SID_CONNECTOR_LINE:
+        case SID_CONNECTOR_LINE_ARROW_START:
+        case SID_CONNECTOR_LINE_ARROW_END:
+        case SID_CONNECTOR_LINE_ARROWS:
+        case SID_CONNECTOR_LINE_CIRCLE_START:
+        case SID_CONNECTOR_LINE_CIRCLE_END:
+        case SID_CONNECTOR_LINE_CIRCLES:
+        case SID_CONNECTOR_CURVE:
+        case SID_CONNECTOR_CURVE_ARROW_START:
+        case SID_CONNECTOR_CURVE_ARROW_END:
+        case SID_CONNECTOR_CURVE_ARROWS:
+        case SID_CONNECTOR_CURVE_CIRCLE_START:
+        case SID_CONNECTOR_CURVE_CIRCLE_END:
+        case SID_CONNECTOR_CURVE_CIRCLES:
+        case SID_CONNECTOR_LINES:
+        case SID_CONNECTOR_LINES_ARROW_START:
+        case SID_CONNECTOR_LINES_ARROW_END:
+        case SID_CONNECTOR_LINES_ARROWS:
+        case SID_CONNECTOR_LINES_CIRCLE_START:
+        case SID_CONNECTOR_LINES_CIRCLE_END:
+        case SID_CONNECTOR_LINES_CIRCLES:
+        case SID_INSERT_SIGNATURELINE:
+        {
+            bCreateDirectly = comphelper::LibreOfficeKit::isActive();
+            SetCurrentFunction( FuConstructRectangle::Create( this, GetActiveWindow(), mpDrawView.get(), GetDoc(), rReq, bPermanent ) );
+            rReq.Done();
+        }
+        break;
+        case SID_DRAW_POLYGON:
+        case SID_DRAW_POLYGON_NOFILL:
+        case SID_DRAW_XPOLYGON:
+        case SID_DRAW_XPOLYGON_NOFILL:
+        case SID_DRAW_FREELINE:
+        case SID_DRAW_FREELINE_NOFILL:
+        case SID_DRAW_BEZIER_FILL:          // BASIC
+        case SID_DRAW_BEZIER_NOFILL:        // BASIC
+        {
+            SetCurrentFunction( FuConstructBezierPolygon::Create(this, GetActiveWindow(), mpDrawView.get(), GetDoc(), rReq, bPermanent) );
+            rReq.Done();
+        }
+        break;
+
+        case SID_GLUE_EDITMODE:
+        {
+            if (nOldSId != SID_GLUE_EDITMODE)
+            {
+                SetCurrentFunction( FuEditGluePoints::Create( this, GetActiveWindow(), mpDrawView.get(), GetDoc(), rReq, bPermanent ) );
+            }
+            else
+            {
+                GetViewFrame()->GetDispatcher()->Execute(SID_OBJECT_SELECT, SfxCallMode::ASYNCHRON);
+            }
+
+            rReq.Done();
+        }
+        break;
+
+        case SID_DRAW_ARC:
+        case SID_DRAW_CIRCLEARC:
+        case SID_DRAW_PIE:
+        case SID_DRAW_PIE_NOFILL:
+        case SID_DRAW_CIRCLEPIE:
+        case SID_DRAW_CIRCLEPIE_NOFILL:
+        case SID_DRAW_ELLIPSECUT:
+        case SID_DRAW_ELLIPSECUT_NOFILL:
+        case SID_DRAW_CIRCLECUT:
+        case SID_DRAW_CIRCLECUT_NOFILL:
+        {
+            SetCurrentFunction( FuConstructArc::Create( this, GetActiveWindow(), mpDrawView.get(), GetDoc(), rReq, bPermanent) );
+            rReq.Done();
+        }
+        break;
+
+        case SID_3D_CUBE:
+        case SID_3D_SHELL:
+        case SID_3D_SPHERE:
+        case SID_3D_TORUS:
+        case SID_3D_HALF_SPHERE:
+        case SID_3D_CYLINDER:
+        case SID_3D_CONE:
+        case SID_3D_PYRAMID:
+        {
+            SetCurrentFunction( FuConstruct3dObject::Create(this, GetActiveWindow(), mpDrawView.get(), GetDoc(), rReq, bPermanent ) );
+            rReq.Done();
+        }
+        break;
+
+        case SID_DRAWTBX_CS_BASIC :
+        case SID_DRAWTBX_CS_SYMBOL :
+        case SID_DRAWTBX_CS_ARROW :
+        case SID_DRAWTBX_CS_FLOWCHART :
+        case SID_DRAWTBX_CS_CALLOUT :
+        case SID_DRAWTBX_CS_STAR :
+        case SID_DRAW_CS_ID :
+        {
+            SetCurrentFunction( FuConstructCustomShape::Create( this, GetActiveWindow(), mpDrawView.get(), GetDoc(), rReq, bPermanent ) );
+            rReq.Done();
+
+            bCreateDirectly = comphelper::LibreOfficeKit::isActive();
+            const SfxItemSet* pArgs = rReq.GetArgs();
+            if (pArgs && pArgs->HasItem(FN_PARAM_1))
+            {
+                bCreateDirectly = static_cast<const SfxBoolItem&>(pArgs->Get(FN_PARAM_1)).GetValue();
+            }
+
+            if ( nSId != SID_DRAW_CS_ID )
+            {
+                SfxBindings& rBind = GetViewFrame()->GetBindings();
+                rBind.Invalidate( nSId );
+                rBind.Update( nSId );
+            }
+        }
+        break;
+
+        case SID_FORMATPAINTBRUSH:
+        {
+            SetCurrentFunction( FuFormatPaintBrush::Create( this, GetActiveWindow(), mpDrawView.get(), GetDoc(), rReq ) );
+            rReq.Done();
+            SfxBindings& rBind = GetViewFrame()->GetBindings();
+            rBind.Invalidate( nSId );
+            rBind.Update( nSId );
+            break;
+        }
+
+        case SID_ZOOM_MODE:
+        case SID_ZOOM_PANNING:
+        {
+            if (nOldSId != nSId)
+            {
+                mbZoomOnPage = false;
+                SetCurrentFunction( FuZoom::Create(this, GetActiveWindow(), mpDrawView.get(), GetDoc(), rReq ) );
+            }
+            else
+            {
+                GetViewFrame()->GetDispatcher()->Execute(SID_OBJECT_SELECT, SfxCallMode::ASYNCHRON);
+            }
+            rReq.Done();
+        }
+        break;
+
+        default:
+           break;
+    }
+
+    if(HasOldFunction())
+    {
+        sal_uInt16 nSlotId = GetOldFunction()->GetSlotID();
+
+        GetOldFunction()->Deactivate();
+        SetOldFunction(nullptr);
+
+        SfxBindings& rBind = GetViewFrame()->GetBindings();
+        rBind.Invalidate( nSlotId );
+        rBind.Update( nSlotId );
+    }
+
+    if(HasCurrentFunction())
+    {
+        GetCurrentFunction()->Activate();
+        SetOldFunction( GetCurrentFunction() );
+    }
+
+    // invalidate shell, is faster than every individually (says MI)
+    // now explicit the last slot incl. Update()
+    Invalidate();
+
+    // CTRL-SID_OBJECT_SELECT -> select first draw object if none is selected yet
+    if(SID_OBJECT_SELECT == nSId && HasCurrentFunction() && (rReq.GetModifier() & KEY_MOD1))
+    {
+        if(!GetView()->AreObjectsMarked())
+        {
+            // select first object
+            GetView()->UnmarkAllObj();
+            GetView()->MarkNextObj(true);
+
+            // ...and make it visible
+            if(GetView()->AreObjectsMarked())
+                GetView()->MakeVisible(GetView()->GetAllMarkedRect(), *GetActiveWindow());
+        }
+    }
+
+    // with qualifier construct directly
+    if(!(HasCurrentFunction() && ((rReq.GetModifier() & KEY_MOD1) || bCreateDirectly)))
+        return;
+
+    // disable interactive drawing for LOK
+    if (bCreateDirectly)
+            GetViewFrame()->GetDispatcher()->Execute(SID_OBJECT_SELECT, SfxCallMode::ASYNCHRON);
+
+    // get SdOptions
+    SdOptions* pOptions = SD_MOD()->GetSdOptions(GetDoc()->GetDocumentType());
+    sal_uInt32 nDefaultObjectSizeWidth(pOptions->GetDefaultObjectSizeWidth());
+    sal_uInt32 nDefaultObjectSizeHeight(pOptions->GetDefaultObjectSizeHeight());
+
+    // calc position and size
+    ::tools::Rectangle aVisArea = GetActiveWindow()->PixelToLogic(::tools::Rectangle(Point(0,0), GetActiveWindow()->GetOutputSizePixel()));
+    if (comphelper::LibreOfficeKit::isActive())
+    {
+        // aVisArea is nonsensical in the LOK case, use the slide size
+        aVisArea = ::tools::Rectangle(Point(), getCurrentPage()->GetSize());
+    }
+
+    Point aPagePos = aVisArea.Center();
+    aPagePos.AdjustX( -sal_Int32(nDefaultObjectSizeWidth / 2) );
+    aPagePos.AdjustY( -sal_Int32(nDefaultObjectSizeHeight / 2) );
+    ::tools::Rectangle aNewObjectRectangle(aPagePos, Size(nDefaultObjectSizeWidth, nDefaultObjectSizeHeight));
+    SdrPageView* pPageView = mpDrawView->GetSdrPageView();
+
+    if(!pPageView)
+        return;
+
+    // create the default object
+    SdrObjectUniquePtr pObj = GetCurrentFunction()->CreateDefaultObject(nSId, aNewObjectRectangle);
+
+    if(!pObj)
+        return;
+
+    auto pObjTmp = pObj.get();
+    // insert into page
+    GetView()->InsertObjectAtView(pObj.release(), *pPageView);
+
+    // Now that pFuActual has done what it was created for we
+    // can switch on the edit mode for callout objects.
+    switch (nSId)
+    {
+        case SID_DRAW_CAPTION:
+        case SID_DRAW_CAPTION_VERTICAL:
+        {
+            // Make FuText the current function.
+            SfxUInt16Item aItem (SID_TEXTEDIT, 1);
+            GetViewFrame()->GetDispatcher()->
+                ExecuteList(SID_TEXTEDIT, SfxCallMode::SYNCHRON |
+                    SfxCallMode::RECORD, { &aItem });
+            // Put text object into edit mode.
+            GetView()->SdrBeginTextEdit(static_cast<SdrTextObj*>(pObjTmp), pPageView);
+            break;
+        }
+    }
+}
+
+void DrawViewShell::FuDeleteSelectedObjects()
+{
+    if( !mpDrawView )
+        return;
+
+    bool bConsumed = false;
+
+    //if any placeholders are selected
+    if (mpDrawView->IsPresObjSelected(false))
+    {
+        //If there are placeholders in the list which can be toggled
+        //off in edit->master->master elements then do that here,
+        std::vector<SdrObject*> aPresMarksToRemove;
+        const SdrMarkList& rMarkList = mpDrawView->GetMarkedObjectList();
+        for (size_t i=0; i < rMarkList.GetMarkCount(); ++i)
+        {
+            SdrObject* pObj = rMarkList.GetMark(i)->GetMarkedSdrObj();
+            SdPage* pPage = static_cast<SdPage*>(pObj->getSdrPageFromSdrObject());
+            PresObjKind eKind = pPage->GetPresObjKind(pObj);
+            if (eKind == PresObjKind::Footer || eKind == PresObjKind::Header ||
+                eKind == PresObjKind::DateTime || eKind == PresObjKind::SlideNumber)
+            {
+                aPresMarksToRemove.push_back(pObj);
+            }
+        }
+
+        for (SdrObject* pObj : aPresMarksToRemove)
+        {
+            //Unmark object
+            mpDrawView->MarkObj(pObj, mpDrawView->GetSdrPageView(), true);
+            SdPage* pPage = static_cast<SdPage*>(pObj->getSdrPageFromSdrObject());
+            //remove placeholder from master page
+            pPage->DestroyDefaultPresObj(pPage->GetPresObjKind(pObj));
+        }
+
+        bConsumed = true;
+    }
+
+    // placeholders which cannot be deleted selected
+    if (mpDrawView->IsPresObjSelected(false, true, false, true))
+    {
+        std::unique_ptr<weld::MessageDialog> xInfoBox(Application::CreateMessageDialog(GetFrameWeld(),
+                                                      VclMessageType::Info, VclButtonsType::Ok,
+                                                      SdResId(STR_ACTION_NOTPOSSIBLE)));
+        xInfoBox->run();
+        bConsumed = true;
+    }
+
+    if (bConsumed)
+        return;
+
+    vcl::KeyCode aKCode(KEY_DELETE);
+    KeyEvent aKEvt( 0, aKCode);
+
+    bConsumed = mpDrawView->getSmartTags().KeyInput( aKEvt );
+
+    if (!bConsumed && HasCurrentFunction())
+        bConsumed = GetCurrentFunction()->KeyInput(aKEvt);
+
+    if (!bConsumed)
+        mpDrawView->DeleteMarked();
+}
+
+void DrawViewShell::FuSupport(SfxRequest& rReq)
+{
+    if( rReq.GetSlot() == SID_STYLE_FAMILY && rReq.GetArgs())
+        GetDocSh()->SetStyleFamily(static_cast<SfxStyleFamily>(rReq.GetArgs()->Get( SID_STYLE_FAMILY ).GetValue()));
+
+    // We do not execute a thing during a native slide show
+    if(SlideShow::IsRunning(GetViewShellBase()) &&
+        (rReq.GetSlot() != SID_PRESENTATION_END &&
+         rReq.GetSlot() != SID_SIZE_PAGE))
+        return;
+
+    CheckLineTo (rReq);
+
+    if( !mpDrawView )
+        return;
+
+    sal_uInt16 nSId = rReq.GetSlot();
+
+    switch ( nSId )
+    {
+        case SID_CLEAR_UNDO_STACK:
+        {
+            GetDocSh()->ClearUndoBuffer();
+            rReq.Ignore ();
+        }
+        break;
+
+        case SID_PRESENTATION:
+        case SID_PRESENTATION_CURRENT_SLIDE:
+        case SID_REHEARSE_TIMINGS:
+        {
+            slideshowhelp::ShowSlideShow(rReq, *GetDoc());
+            rReq.Ignore ();
+        }
+        break;
+
+        case SID_PRESENTATION_END:
+        {
+            StopSlideShow();
+
+            rReq.Ignore ();
+        }
+        break;
+
+        case SID_BEZIER_EDIT:
+        {
+            mpDrawView->SetFrameDragSingles(!mpDrawView->IsFrameDragSingles());
+
+            /******************************************************************
+            * turn ObjectBar on
+            ******************************************************************/
+            if( dynamic_cast< FuSelection* >( GetCurrentFunction().get() ) || dynamic_cast< FuConstructBezierPolygon* >( GetCurrentFunction().get() ) )
+            {
+                // Tell the tool bar manager about the context change.
+                GetViewShellBase().GetToolBarManager()->SelectionHasChanged(*this,*mpDrawView);
+            }
+
+            Invalidate(SID_BEZIER_EDIT);
+            rReq.Ignore();
+        }
+        break;
+
+        case SID_OBJECT_CLOSE:
+        {
+            const SdrMarkList& rMarkList = mpDrawView->GetMarkedObjectList();
+            if ( rMarkList.GetMark(0) && !mpDrawView->IsAction() )
+            {
+                SdrPathObj* pPathObj = static_cast<SdrPathObj*>( rMarkList.GetMark(0)->GetMarkedSdrObj());
+                const bool bUndo = mpDrawView->IsUndoEnabled();
+                if( bUndo )
+                    mpDrawView->BegUndo(SdResId(STR_UNDO_BEZCLOSE));
+
+                mpDrawView->UnmarkAllPoints();
+
+                if( bUndo )
+                    mpDrawView->AddUndo(std::make_unique<SdrUndoGeoObj>(*pPathObj));
+
+                pPathObj->ToggleClosed();
+
+                if( bUndo )
+                    mpDrawView->EndUndo();
+            }
+            rReq.Done();
+        }
+        break;
+
+        case SID_CUT:
+        {
+            if ( mpDrawView->IsPresObjSelected(false, true, false, true) )
+            {
+                std::unique_ptr<weld::MessageDialog> xInfoBox(Application::CreateMessageDialog(GetFrameWeld(),
+                                                              VclMessageType::Info, VclButtonsType::Ok,
+                                                              SdResId(STR_ACTION_NOTPOSSIBLE)));
+                xInfoBox->run();
+            }
+            else
+            {
+                //tdf#126197: EndTextEdit in all views if current one is not in TextEdit
+                if ( !mpDrawView->IsTextEdit() )
+                    mpDrawView->EndTextEditAllViews();
+
+                if(HasCurrentFunction())
+                {
+                    GetCurrentFunction()->DoCut();
+                }
+                else if(mpDrawView)
+                {
+                    mpDrawView->DoCut();
+                }
+            }
+            rReq.Ignore ();
+        }
+        break;
+
+        case SID_COPY:
+        {
+            if ( mpDrawView->IsPresObjSelected(false, true, false, true) )
+            {
+                std::unique_ptr<weld::MessageDialog> xInfoBox(Application::CreateMessageDialog(GetFrameWeld(),
+                                                              VclMessageType::Info, VclButtonsType::Ok,
+                                                              SdResId(STR_ACTION_NOTPOSSIBLE)));
+                xInfoBox->run();
+            }
+            else
+            {
+                if(HasCurrentFunction())
+                {
+                    GetCurrentFunction()->DoCopy();
+                }
+                else if( mpDrawView )
+                {
+                    mpDrawView->DoCopy();
+                }
+            }
+            rReq.Ignore ();
+        }
+        break;
+
+        case SID_PASTE:
+        {
+            weld::WaitObject aWait(GetFrameWeld());
+
+            if(HasCurrentFunction())
+            {
+                GetCurrentFunction()->DoPaste();
+            }
+            else if(mpDrawView)
+            {
+                mpDrawView->DoPaste();
+            }
+
+            rReq.Ignore ();
+        }
+        break;
+
+        case SID_UNICODE_NOTATION_TOGGLE:
+        {
+            if( mpDrawView->IsTextEdit() )
+            {
+                OutlinerView* pOLV = mpDrawView->GetTextEditOutlinerView();
+                if( pOLV )
+                {
+                    OUString sInput = pOLV->GetSurroundingText();
+                    ESelection aSel( pOLV->GetSelection() );
+                    if( aSel.nStartPos > aSel.nEndPos )
+                        aSel.nEndPos = aSel.nStartPos;
+
+                    //calculate a valid end-position by reading logical characters
+                    sal_Int32 nUtf16Pos=0;
+                    while( (nUtf16Pos < sInput.getLength()) && (nUtf16Pos < aSel.nEndPos) )
+                    {
+                        sInput.iterateCodePoints(&nUtf16Pos);
+                        //The mouse can set the cursor in the middle of a multi-unit character,
+                        //    so reset to the proper end of the logical characters
+                        if( nUtf16Pos > aSel.nEndPos )
+                            aSel.nEndPos = nUtf16Pos;
+                    }
+
+                    ToggleUnicodeCodepoint aToggle;
+                    while( nUtf16Pos && aToggle.AllowMoreInput( sInput[nUtf16Pos-1]) )
+                        --nUtf16Pos;
+                    OUString sReplacement = aToggle.ReplacementString();
+                    if( !sReplacement.isEmpty() )
+                    {
+                        OUString sStringToReplace = aToggle.StringToReplace();
+                        mpDrawView->BegUndo(sStringToReplace +"->"+ sReplacement);
+                        aSel.nStartPos = aSel.nEndPos - sStringToReplace.getLength();
+                        pOLV->SetSelection( aSel );
+                        pOLV->InsertText(sReplacement, true);
+                        mpDrawView->EndUndo();
+                    }
+                }
+            }
+        }
+        break;
+
+        case SID_PASTE_UNFORMATTED:
+        {
+            weld::WaitObject aWait(GetFrameWeld());
+
+            if(HasCurrentFunction())
+            {
+                GetCurrentFunction()->DoPasteUnformatted();
+            }
+            else if(mpDrawView)
+            {
+                TransferableDataHelper aDataHelper( TransferableDataHelper::CreateFromSystemClipboard( GetActiveWindow() ) );
+                if (aDataHelper.GetTransferable().is())
+                {
+                    sal_Int8 nAction = DND_ACTION_COPY;
+                    mpDrawView->InsertData( aDataHelper,
+                                            GetActiveWindow()->PixelToLogic( ::tools::Rectangle( Point(), GetActiveWindow()->GetOutputSizePixel() ).Center() ),
+                                            nAction, false, SotClipboardFormatId::STRING);
+                }
+            }
+
+            rReq.Ignore ();
+        }
+        break;
+
+        case SID_CLIPBOARD_FORMAT_ITEMS:
+        {
+            weld::WaitObject aWait(GetFrameWeld());
+            TransferableDataHelper  aDataHelper( TransferableDataHelper::CreateFromSystemClipboard( GetActiveWindow() ) );
+            const SfxItemSet*       pReqArgs = rReq.GetArgs();
+            SotClipboardFormatId    nFormat = SotClipboardFormatId::NONE;
+
+            if( pReqArgs )
+            {
+                const SfxUInt32Item* pIsActive = rReq.GetArg<SfxUInt32Item>(SID_CLIPBOARD_FORMAT_ITEMS);
+                nFormat = static_cast<SotClipboardFormatId>(pIsActive->GetValue());
+            }
+
+            if( nFormat != SotClipboardFormatId::NONE && aDataHelper.GetTransferable().is() )
+            {
+                sal_Int8 nAction = DND_ACTION_COPY;
+
+                if( !mpDrawView->InsertData( aDataHelper,
+                                          GetActiveWindow()->PixelToLogic( ::tools::Rectangle( Point(), GetActiveWindow()->GetOutputSizePixel() ).Center() ),
+                                          nAction, false, nFormat ) )
+                {
+                    INetBookmark    aINetBookmark( "", "" );
+
+                    if( ( aDataHelper.HasFormat( SotClipboardFormatId::NETSCAPE_BOOKMARK ) &&
+                          aDataHelper.GetINetBookmark( SotClipboardFormatId::NETSCAPE_BOOKMARK, aINetBookmark ) ) ||
+                        ( aDataHelper.HasFormat( SotClipboardFormatId::FILEGRPDESCRIPTOR ) &&
+                          aDataHelper.GetINetBookmark( SotClipboardFormatId::FILEGRPDESCRIPTOR, aINetBookmark ) ) ||
+                        ( aDataHelper.HasFormat( SotClipboardFormatId::UNIFORMRESOURCELOCATOR ) &&
+                          aDataHelper.GetINetBookmark( SotClipboardFormatId::UNIFORMRESOURCELOCATOR, aINetBookmark ) ) )
+                    {
+                        InsertURLField( aINetBookmark.GetURL(), aINetBookmark.GetDescription(), "" );
+                    }
+                }
+            }
+        }
+        break;
+
+        case SID_DELETE:
+        {
+            if ( mpDrawView->IsTextEdit() )
+            {
+                OutlinerView* pOLV = mpDrawView->GetTextEditOutlinerView();
+
+                if (pOLV)
+                {
+                    vcl::KeyCode aKCode(KEY_DELETE);
+                    KeyEvent aKEvt( 0, aKCode);
+                    // We use SdrObjEditView to handle DEL for underflow handling
+                    (void)mpDrawView->KeyInput(aKEvt, nullptr);
+                }
+            }
+            else
+            {
+                mpDrawView->EndTextEditAllViews();
+                FuDeleteSelectedObjects();
+            }
+            rReq.Ignore ();
+        }
+        break;
+
+        case SID_NOTES_MODE:
+        case SID_SLIDE_MASTER_MODE:
+        case SID_NOTES_MASTER_MODE:
+        case SID_HANDOUT_MASTER_MODE:
+
+            // AutoLayouts have to be ready.
+            GetDoc()->StopWorkStartupDelay();
+            [[fallthrough]];
+
+        case SID_DRAWINGMODE:
+        case SID_SLIDE_SORTER_MODE:
+        case SID_OUTLINE_MODE:
+            // Let the sub-shell manager handle the slot handling.
+            framework::FrameworkHelper::Instance(GetViewShellBase())->HandleModeChangeSlot(
+                nSId,
+                rReq);
+            rReq.Ignore ();
+            break;
+
+        case SID_MASTERPAGE:          // BASIC
+        {
+            if (comphelper::LibreOfficeKit::isActive())
+                GetViewShell()->libreOfficeKitViewCallback(LOK_CALLBACK_STATE_CHANGED,
+                                                           ".uno:SlideMasterPage=true");
+
+            // AutoLayouts needs to be finished
+            GetDoc()->StopWorkStartupDelay();
+
+            const SfxItemSet* pReqArgs = rReq.GetArgs();
+
+            if ( pReqArgs )
+            {
+                const SfxBoolItem* pIsActive = rReq.GetArg<SfxBoolItem>(SID_MASTERPAGE);
+                mbIsLayerModeActive = pIsActive->GetValue ();
+            }
+
+            Broadcast (
+                ViewShellHint(ViewShellHint::HINT_CHANGE_EDIT_MODE_START));
+
+            // turn on default layer of MasterPage
+            mpDrawView->SetActiveLayer(sUNO_LayerName_background_objects);
+
+            ChangeEditMode(EditMode::MasterPage, mbIsLayerModeActive);
+
+            if(HasCurrentFunction(SID_BEZIER_EDIT))
+                GetViewFrame()->GetDispatcher()->Execute(SID_OBJECT_SELECT, SfxCallMode::ASYNCHRON);
+
+            Broadcast (
+                ViewShellHint(ViewShellHint::HINT_CHANGE_EDIT_MODE_END));
+
+            InvalidateWindows();
+            Invalidate();
+
+            rReq.Done();
+        }
+        break;
+
+        case SID_CLOSE_MASTER_VIEW:
+        {
+            // Notify of disabling master view, which is enabled in DrawViewShell::ChangeEditMode.
+            if (comphelper::LibreOfficeKit::isActive())
+                GetViewShell()->libreOfficeKitViewCallback(LOK_CALLBACK_STATE_CHANGED,
+                                                           ".uno:SlideMasterPage=false");
+
+            Broadcast (
+                ViewShellHint(ViewShellHint::HINT_CHANGE_EDIT_MODE_START));
+
+            // Switch page back to the first one.  Not doing so leads to a
+            // crash.  This seems to be some bug in the edit mode switching
+            // and page switching methods.
+            SwitchPage (0);
+            ChangeEditMode(EditMode::Page, IsLayerModeActive());
+            Broadcast (
+                ViewShellHint(ViewShellHint::HINT_CHANGE_EDIT_MODE_END));
+
+            if(HasCurrentFunction(SID_BEZIER_EDIT))
+            {
+                GetViewFrame()->GetDispatcher()->Execute(
+                    SID_OBJECT_SELECT,
+                    SfxCallMode::ASYNCHRON);
+            }
+
+            rReq.Done();
+        }
+        break;
+
+        case SID_RULER:
+        {
+            const SfxItemSet* pReqArgs = rReq.GetArgs();
+
+            // Remember old ruler state
+            bool bOldHasRuler(HasRuler());
+
+            if ( pReqArgs )
+            {
+                const SfxBoolItem* pIsActive = rReq.GetArg<SfxBoolItem>(SID_RULER);
+                SetRuler (pIsActive->GetValue ());
+            }
+            else SetRuler (!HasRuler());
+
+            // Did ruler state change? Tell that to SdOptions, too.
+            bool bHasRuler(HasRuler());
+
+            if(bOldHasRuler != bHasRuler)
+            {
+                SdOptions* pOptions = SD_MOD()->GetSdOptions(GetDoc()->GetDocumentType());
+
+                if(pOptions && pOptions->IsRulerVisible() != bHasRuler)
+                {
+                    pOptions->SetRulerVisible(bHasRuler);
+                }
+            }
+
+            Invalidate (SID_RULER);
+            Resize();
+            rReq.Done ();
+        }
+        break;
+
+        case SID_SIZE_PAGE:
+        case SID_SIZE_PAGE_WIDTH:  // BASIC
+        {
+            mbZoomOnPage = ( rReq.GetSlot() == SID_SIZE_PAGE );
+
+            SdrPageView* pPageView = mpDrawView->GetSdrPageView();
+
+            if ( pPageView )
+            {
+                Point aPagePos(0, 0); // = pPageView->GetOffset();
+                Size aPageSize = pPageView->GetPage()->GetSize();
+
+                aPagePos.AdjustX(aPageSize.Width()  / 2 );
+                aPageSize.setWidth( static_cast<::tools::Long>(aPageSize.Width() * 1.03) );
+
+                if( rReq.GetSlot() == SID_SIZE_PAGE )
+                {
+                    aPagePos.AdjustY(aPageSize.Height() / 2 );
+                    aPageSize.setHeight( static_cast<::tools::Long>(aPageSize.Height() * 1.03) );
+                    aPagePos.AdjustY( -(aPageSize.Height() / 2) );
+                }
+                else
+                {
+                    Point aPt = GetActiveWindow()->PixelToLogic( Point( 0, GetActiveWindow()->GetSizePixel().Height() / 2 ) );
+                    aPagePos.AdjustY(aPt.Y() );
+                    aPageSize.setHeight( 2 );
+                }
+
+                aPagePos.AdjustX( -(aPageSize.Width()  / 2) );
+
+                SetZoomRect( ::tools::Rectangle( aPagePos, aPageSize ) );
+
+                ::tools::Rectangle aVisAreaWin = GetActiveWindow()->PixelToLogic( ::tools::Rectangle( Point(0,0),
+                                              GetActiveWindow()->GetOutputSizePixel()) );
+                mpZoomList->InsertZoomRect(aVisAreaWin);
+            }
+            Invalidate( SID_ZOOM_IN );
+            Invalidate( SID_ZOOM_OUT );
+            Invalidate( SID_ZOOM_PANNING );
+            rReq.Done ();
+        }
+        break;
+
+        case SID_SIZE_REAL:  // BASIC
+        {
+            mbZoomOnPage = false;
+            SetZoom( 100 );
+            ::tools::Rectangle aVisAreaWin = GetActiveWindow()->PixelToLogic( ::tools::Rectangle( Point(0,0),
+                                              GetActiveWindow()->GetOutputSizePixel()) );
+            mpZoomList->InsertZoomRect(aVisAreaWin);
+            Invalidate( SID_ZOOM_IN );
+            Invalidate( SID_ZOOM_OUT );
+            Invalidate( SID_ZOOM_PANNING );
+            rReq.Done ();
+        }
+        break;
+
+        case SID_ZOOM_OUT:  // BASIC
+        {
+            mbZoomOnPage = false;
+            SetZoom( std::max<::tools::Long>( GetActiveWindow()->GetZoom() / 2, GetActiveWindow()->GetMinZoom() ) );
+            ::tools::Rectangle aVisAreaWin = GetActiveWindow()->PixelToLogic( ::tools::Rectangle( Point(0,0),
+                                              GetActiveWindow()->GetOutputSizePixel()) );
+            mpZoomList->InsertZoomRect(aVisAreaWin);
+            Invalidate( SID_ZOOM_IN );
+            Invalidate( SID_ZOOM_OUT );
+            Invalidate( SID_ZOOM_PANNING );
+            rReq.Done ();
+        }
+        break;
+
+        case SID_ZOOM_IN:
+        {
+            mbZoomOnPage = false;
+            SetZoom( std::min<::tools::Long>( GetActiveWindow()->GetZoom() * 2, GetActiveWindow()->GetMaxZoom() ) );
+            ::tools::Rectangle aVisAreaWin = GetActiveWindow()->PixelToLogic( ::tools::Rectangle( Point(0,0),
+                                              GetActiveWindow()->GetOutputSizePixel()) );
+            mpZoomList->InsertZoomRect(aVisAreaWin);
+            Invalidate( SID_ZOOM_IN );
+            Invalidate(SID_ZOOM_OUT);
+            Invalidate( SID_ZOOM_PANNING );
+            rReq.Done ();
+        }
+        break;
+
+        case SID_SIZE_VISAREA:
+        {
+            ::tools::Rectangle aVisArea = mpFrameView->GetVisArea();
+            Size aVisAreaSize = aVisArea.GetSize();
+
+            if (!aVisAreaSize.IsEmpty())
+            {
+                mbZoomOnPage = false;
+                SetZoomRect(aVisArea);
+                Invalidate( SID_ZOOM_IN );
+                Invalidate( SID_ZOOM_OUT );
+                Invalidate( SID_ZOOM_PANNING );
+            }
+            rReq.Done ();
+        }
+        break;
+
+        // name confusion: SID_SIZE_OPTIMAL -> Zoom onto selected objects
+        // --> Is offered as object zoom in program
+        case SID_SIZE_OPTIMAL:  // BASIC
+        {
+            mbZoomOnPage = false;
+            if ( mpDrawView->AreObjectsMarked() )
+            {
+                maMarkRect = mpDrawView->GetAllMarkedRect();
+                ::tools::Long nW = static_cast<::tools::Long>(maMarkRect.GetWidth()  * 1.03);
+                ::tools::Long nH = static_cast<::tools::Long>(maMarkRect.GetHeight() * 1.03);
+                Point aPos = maMarkRect.Center();
+                aPos.AdjustX( -(nW / 2) );
+                aPos.AdjustY( -(nH / 2) );
+                if ( nW && nH )
+                {
+                    SetZoomRect(::tools::Rectangle(aPos, Size(nW, nH)));
+
+                    ::tools::Rectangle aVisAreaWin = GetActiveWindow()->PixelToLogic( ::tools::Rectangle( Point(0,0),
+                                              GetActiveWindow()->GetOutputSizePixel()) );
+                    mpZoomList->InsertZoomRect(aVisAreaWin);
+                }
+            }
+            Invalidate( SID_ZOOM_IN );
+            Invalidate( SID_ZOOM_OUT );
+            Invalidate( SID_ZOOM_PANNING );
+            rReq.Done ();
+        }
+        break;
+
+        // name confusion: SID_SIZE_ALL -> Zoom onto all objects
+        // --> Is offered as optimal in program
+        case SID_SIZE_ALL:  // BASIC
+        {
+            mbZoomOnPage = false;
+            SdrPageView* pPageView = mpDrawView->GetSdrPageView();
+
+            if( pPageView )
+            {
+                ::tools::Rectangle aBoundRect( pPageView->GetObjList()->GetAllObjBoundRect() );
+
+                ::tools::Long nW = static_cast<::tools::Long>(aBoundRect.GetWidth() * 1.03);
+                ::tools::Long nH = static_cast<::tools::Long>(aBoundRect.GetHeight() * 1.03);
+                Point aPos = aBoundRect.Center();
+                aPos.AdjustX( -(nW / 2) );
+                aPos.AdjustY( -(nH / 2) );
+                if ( nW && nH )
+                {
+                    SetZoomRect( ::tools::Rectangle( aPos, Size( nW, nH ) ) );
+
+                    ::tools::Rectangle aVisAreaWin = GetActiveWindow()->PixelToLogic( ::tools::Rectangle( Point(0,0),
+                                              GetActiveWindow()->GetOutputSizePixel()) );
+                    mpZoomList->InsertZoomRect(aVisAreaWin);
+                }
+
+                Invalidate( SID_ZOOM_IN );
+                Invalidate( SID_ZOOM_OUT );
+                Invalidate( SID_ZOOM_PANNING );
+            }
+            rReq.Done ();
+        }
+        break;
+
+        case SID_ZOOM_PREV:
+        {
+            if (mpDrawView->IsTextEdit())
+            {
+                mpDrawView->SdrEndTextEdit();
+            }
+
+            if (mpZoomList->IsPreviousPossible())
+            {
+                // set previous ZoomRect
+                SetZoomRect(mpZoomList->GetPreviousZoomRect());
+            }
+            rReq.Done ();
+        }
+        break;
+
+        case SID_ZOOM_NEXT:
+        {
+            if (mpDrawView->IsTextEdit())
+            {
+                mpDrawView->SdrEndTextEdit();
+            }
+
+            if (mpZoomList->IsNextPossible())
+            {
+                // set next ZoomRect
+                SetZoomRect(mpZoomList->GetNextZoomRect());
+            }
+            rReq.Done ();
+        }
+        break;
+
+        case SID_GLUE_INSERT_POINT:
+        case SID_GLUE_PERCENT:
+        case SID_GLUE_ESCDIR:
+        case SID_GLUE_ESCDIR_LEFT:
+        case SID_GLUE_ESCDIR_RIGHT:
+        case SID_GLUE_ESCDIR_TOP:
+        case SID_GLUE_ESCDIR_BOTTOM:
+        case SID_GLUE_HORZALIGN_CENTER:
+        case SID_GLUE_HORZALIGN_LEFT:
+        case SID_GLUE_HORZALIGN_RIGHT:
+        case SID_GLUE_VERTALIGN_CENTER:
+        case SID_GLUE_VERTALIGN_TOP:
+        case SID_GLUE_VERTALIGN_BOTTOM:
+        {
+            rtl::Reference<FuPoor> xFunc( GetCurrentFunction() );
+            FuEditGluePoints* pFunc = dynamic_cast< FuEditGluePoints* >( xFunc.get() );
+
+            if(pFunc)
+                pFunc->ReceiveRequest(rReq);
+
+            rReq.Done();
+        }
+        break;
+
+        case SID_AUTOSPELL_CHECK:
+        {
+            bool bOnlineSpell;
+            const SfxPoolItem* pItem;
+
+            if (rReq.GetArgs()->HasItem(FN_PARAM_1, &pItem))
+                bOnlineSpell = static_cast<const SfxBoolItem*>(pItem)->GetValue();
+            else // Toggle
+                bOnlineSpell = !GetDoc()->GetOnlineSpell();
+
+            GetDoc()->SetOnlineSpell(bOnlineSpell);
+
+            ::Outliner* pOL = mpDrawView->GetTextEditOutliner();
+
+            if (pOL)
+            {
+                EEControlBits nCntrl = pOL->GetControlWord();
+
+                if (bOnlineSpell)
+                    nCntrl |= EEControlBits::ONLINESPELLING;
+                else
+                    nCntrl &= ~EEControlBits::ONLINESPELLING;
+
+                pOL->SetControlWord(nCntrl);
+            }
+
+            GetActiveWindow()->Invalidate();
+            rReq.Done ();
+        }
+        break;
+
+        case SID_TRANSLITERATE_SENTENCE_CASE:
+        case SID_TRANSLITERATE_TITLE_CASE:
+        case SID_TRANSLITERATE_TOGGLE_CASE:
+        case SID_TRANSLITERATE_UPPER:
+        case SID_TRANSLITERATE_LOWER:
+        case SID_TRANSLITERATE_HALFWIDTH:
+        case SID_TRANSLITERATE_FULLWIDTH:
+        case SID_TRANSLITERATE_HIRAGANA:
+        case SID_TRANSLITERATE_KATAKANA:
+        {
+            OutlinerView* pOLV = GetView()->GetTextEditOutlinerView();
+            if( pOLV )
+            {
+                TransliterationFlags nType = TransliterationFlags::NONE;
+
+                switch( nSId )
+                {
+                    case SID_TRANSLITERATE_SENTENCE_CASE:
+                        nType = TransliterationFlags::SENTENCE_CASE;
+                        break;
+                    case SID_TRANSLITERATE_TITLE_CASE:
+                        nType = TransliterationFlags::TITLE_CASE;
+                        break;
+                    case SID_TRANSLITERATE_TOGGLE_CASE:
+                        nType = TransliterationFlags::TOGGLE_CASE;
+                        break;
+                    case SID_TRANSLITERATE_UPPER:
+                        nType = TransliterationFlags::LOWERCASE_UPPERCASE;
+                        break;
+                    case SID_TRANSLITERATE_LOWER:
+                        nType = TransliterationFlags::UPPERCASE_LOWERCASE;
+                        break;
+                    case SID_TRANSLITERATE_HALFWIDTH:
+                        nType = TransliterationFlags::FULLWIDTH_HALFWIDTH;
+                        break;
+                    case SID_TRANSLITERATE_FULLWIDTH:
+                        nType = TransliterationFlags::HALFWIDTH_FULLWIDTH;
+                        break;
+                    case SID_TRANSLITERATE_HIRAGANA:
+                        nType = TransliterationFlags::KATAKANA_HIRAGANA;
+                        break;
+                    case SID_TRANSLITERATE_KATAKANA:
+                        nType = TransliterationFlags::HIRAGANA_KATAKANA;
+                        break;
+                }
+
+                pOLV->TransliterateText( nType );
+            }
+
+            rReq.Done();
+        }
+        break;
+
+        // #UndoRedo#
+        case SID_UNDO :
+        {
+            // moved implementation to BaseClass
+            ImpSidUndo(rReq);
+        }
+        break;
+        case SID_REDO :
+        {
+            // moved implementation to BaseClass
+            ImpSidRedo(rReq);
+        }
+        break;
+
+        default:
+        break;
+    }
+}
+
+void DrawViewShell::FuSupportRotate(SfxRequest const &rReq)
+{
+    if( rReq.GetSlot() != SID_TRANSLITERATE_ROTATE_CASE )
+        return;
+
+    ::sd::View* pView = GetView();
+
+    if (!pView)
+        return;
+
+    OutlinerView* pOLV = pView->GetTextEditOutlinerView();
+
+    if (!pOLV)
+        return;
+
+    pOLV->TransliterateText( m_aRotateCase.getNextMode() );
+}
+
+void DrawViewShell::InsertURLField(const OUString& rURL, const OUString& rText,
+                                   const OUString& rTarget)
+{
+    OutlinerView* pOLV = mpDrawView->GetTextEditOutlinerView();
+
+    if (pOLV)
+    {
+        ESelection aSel( pOLV->GetSelection() );
+        SvxFieldItem aURLItem( SvxURLField( rURL, rText, SvxURLFormat::Repr ), EE_FEATURE_FIELD );
+        pOLV->InsertField( aURLItem );
+        if ( aSel.nStartPos <= aSel.nEndPos )
+            aSel.nEndPos = aSel.nStartPos + 1;
+        else
+            aSel.nStartPos = aSel.nEndPos + 1;
+        pOLV->SetSelection( aSel );
+    }
+    else
+    {
+        Outliner* pOutl = GetDoc()->GetInternalOutliner();
+        pOutl->Init( OutlinerMode::TextObject );
+        OutlinerMode nOutlMode = pOutl->GetOutlinerMode();
+
+        SvxURLField aURLField(rURL, rText, SvxURLFormat::Repr);
+        aURLField.SetTargetFrame(rTarget);
+        SvxFieldItem aURLItem(aURLField, EE_FEATURE_FIELD);
+        pOutl->QuickInsertField( aURLItem, ESelection() );
+        std::optional<OutlinerParaObject> pOutlParaObject = pOutl->CreateParaObject();
+
+        SdrRectObj* pRectObj = new SdrRectObj(
+            GetView()->getSdrModelFromSdrView(),
+            SdrObjKind::Text);
+
+        pOutl->UpdateFields();
+        pOutl->SetUpdateLayout( true );
+        Size aSize(pOutl->CalcTextSize());
+        pOutl->SetUpdateLayout( false );
+
+        Point aPos;
+        ::tools::Rectangle aRect(aPos, GetActiveWindow()->GetOutputSizePixel() );
+        aPos = aRect.Center();
+        aPos = GetActiveWindow()->PixelToLogic(aPos);
+
+        if (aPos.getX() - (aSize.Width() / 2) >= 0)
+            aPos.AdjustX( -(aSize.Width() / 2) );
+        if (aPos.getY() - (aSize.Height() / 2) >= 0)
+            aPos.AdjustY( -(aSize.Height() / 2) );
+
+        ::tools::Rectangle aLogicRect(aPos, aSize);
+        pRectObj->SetLogicRect(aLogicRect);
+        pRectObj->SetOutlinerParaObject( std::move(pOutlParaObject) );
+        mpDrawView->InsertObjectAtView(pRectObj, *mpDrawView->GetSdrPageView());
+        pOutl->Init( nOutlMode );
+    }
+}
+
+void DrawViewShell::InsertURLButton(const OUString& rURL, const OUString& rText,
+                                    const OUString& rTarget, const Point* pPos)
+{
+    bool bNewObj = true;
+
+    const OUString sTargetURL( ::URIHelper::SmartRel2Abs( INetURLObject( GetDocSh()->GetMedium()->GetBaseURL() ), rURL, URIHelper::GetMaybeFileHdl(), true, false,
+                                                                INetURLObject::EncodeMechanism::WasEncoded,
+                                                                INetURLObject::DecodeMechanism::Unambiguous ) );
+    if (mpDrawView->GetMarkedObjectList().GetMarkCount() > 0)
+    {
+        SdrObject* pMarkedObj = mpDrawView->GetMarkedObjectList().GetMark(0)->GetMarkedSdrObj();
+        if( pMarkedObj ) try
+        {
+            // change first marked object
+            if( SdrInventor::FmForm == pMarkedObj->GetObjInventor() && pMarkedObj->GetObjIdentifier() == SdrObjKind::FormButton )
+            {
+                bNewObj = false;
+
+                SdrUnoObj* pUnoCtrl = static_cast< SdrUnoObj* >( pMarkedObj );
+
+                Reference< awt::XControlModel > xControlModel( pUnoCtrl->GetUnoControlModel(), UNO_SET_THROW );
+                Reference< beans::XPropertySet > xPropSet( xControlModel, UNO_QUERY_THROW );
+
+                xPropSet->setPropertyValue("Label" , Any( rText ) );
+                xPropSet->setPropertyValue("TargetURL" , Any( sTargetURL ) );
+
+                if( !rTarget.isEmpty() )
+                    xPropSet->setPropertyValue("TargetFrame" , Any( rTarget ) );
+
+                xPropSet->setPropertyValue( "ButtonType" , Any( form::FormButtonType_URL ) );
+#if HAVE_FEATURE_AVMEDIA
+                if ( ::avmedia::MediaWindow::isMediaURL( rURL, ""/*TODO?*/ ) )
+                {
+                    xPropSet->setPropertyValue( "DispatchURLInternal" , Any( true ) );
+                }
+#endif
+            }
+            else
+            {
+                // add url as interaction for first selected shape
+                bNewObj = false;
+
+                SdAnimationInfo* pInfo = SdDrawDocument::GetShapeUserData(*pMarkedObj, true);
+                pInfo->meClickAction = presentation::ClickAction_DOCUMENT;
+                pInfo->SetBookmark( sTargetURL );
+            }
+        }
+        catch( uno::Exception& )
+        {
+        }
+    }
+
+    if (!bNewObj)
+        return;
+
+    try
+    {
+        SdrUnoObj* pUnoCtrl = static_cast< SdrUnoObj* >(
+            SdrObjFactory::MakeNewObject(
+                GetView()->getSdrModelFromSdrView(),
+                SdrInventor::FmForm,
+                SdrObjKind::FormButton)); //,
+                //mpDrawView->GetSdrPageView()->GetPage()));
+
+        Reference< awt::XControlModel > xControlModel( pUnoCtrl->GetUnoControlModel(), uno::UNO_SET_THROW );
+        Reference< beans::XPropertySet > xPropSet( xControlModel, uno::UNO_QUERY_THROW );
+
+        xPropSet->setPropertyValue( "Label" , Any( rText ) );
+        xPropSet->setPropertyValue( "TargetURL" , Any( sTargetURL ) );
+
+        if( !rTarget.isEmpty() )
+            xPropSet->setPropertyValue( "TargetFrame" , Any( rTarget ) );
+
+        xPropSet->setPropertyValue( "ButtonType" , Any(  form::FormButtonType_URL ) );
+#if HAVE_FEATURE_AVMEDIA
+        if ( ::avmedia::MediaWindow::isMediaURL( rURL, ""/*TODO?*/ ) )
+            xPropSet->setPropertyValue( "DispatchURLInternal" , Any( true ) );
+#endif
+
+        Point aPos;
+
+        if (pPos)
+        {
+            aPos = *pPos;
+        }
+        else
+        {
+            aPos = ::tools::Rectangle(aPos, GetActiveWindow()->GetOutputSizePixel()).Center();
+            aPos = GetActiveWindow()->PixelToLogic(aPos);
+        }
+
+        Size aSize(4000, 1000);
+        aPos.AdjustX( -(aSize.Width() / 2) );
+        aPos.AdjustY( -(aSize.Height() / 2) );
+        pUnoCtrl->SetLogicRect(::tools::Rectangle(aPos, aSize));
+
+        SdrInsertFlags nOptions = SdrInsertFlags::SETDEFLAYER;
+
+        OSL_ASSERT (GetViewShell()!=nullptr);
+        SfxInPlaceClient* pIpClient = GetViewShell()->GetIPClient();
+        if (pIpClient!=nullptr && pIpClient->IsObjectInPlaceActive())
+        {
+            nOptions |= SdrInsertFlags::DONTMARK;
+        }
+
+        mpDrawView->InsertObjectAtView(pUnoCtrl, *mpDrawView->GetSdrPageView(), nOptions);
+    }
+    catch( Exception& )
+    {
+    }
+}
+
+void DrawViewShell::ShowUIControls (bool bVisible)
+{
+    ViewShell::ShowUIControls (bVisible);
+    maTabControl->Show (bVisible);
+}
+
+namespace slideshowhelp
+{
+    void ShowSlideShow(SfxRequest const & rReq, SdDrawDocument &rDoc)
+    {
+        Reference< XPresentation2 > xPresentation( rDoc.getPresentation() );
+        if( !xPresentation.is() )
+            return;
+
+        sfx2::SfxNotebookBar::LockNotebookBar();
+        if (SID_REHEARSE_TIMINGS == rReq.GetSlot())
+            xPresentation->rehearseTimings();
+        else if (rDoc.getPresentationSettings().mbCustomShow)
+        {
+            //fdo#69975 if a custom show has been set, then
+            //use it whether or not we've been asked to
+            //start from the current or first slide
+            xPresentation->start();
+
+            // if the custom show not set by default, only show it.
+            if (rDoc.getPresentationSettings().mbStartCustomShow)
+                rDoc.getPresentationSettings().mbCustomShow = false;
+        }
+        else if (SID_PRESENTATION_CURRENT_SLIDE == rReq.GetSlot())
+        {
+            //If there is no custom show set, start will automatically
+            //start at the current page
+            xPresentation->start();
+        }
+        else
+        {
+            //Start at page 0, this would blow away any custom
+            //show settings if any were set
+            Sequence< PropertyValue > aArguments{ comphelper::makePropertyValue("FirstPage",
+                                                                                OUString("0")) };
+            xPresentation->startWithArguments( aArguments );
+        }
+        sfx2::SfxNotebookBar::UnlockNotebookBar();
+    }
+}
+
+void DrawViewShell::StopSlideShow()
+{
+    Reference< XPresentation2 > xPresentation( GetDoc()->getPresentation() );
+    if(xPresentation.is() && xPresentation->isRunning())
+    {
+        if( mpDrawView->IsTextEdit() )
+            mpDrawView->SdrEndTextEdit();
+
+        xPresentation->end();
+    }
+}
+
+} // end of namespace sd
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */