diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-07 09:06:44 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-07 09:06:44 +0000 |
commit | ed5640d8b587fbcfed7dd7967f3de04b37a76f26 (patch) | |
tree | 7a5f7c6c9d02226d7471cb3cc8fbbf631b415303 /solenv/gbuild/UnpackedTarball.mk | |
parent | Initial commit. (diff) | |
download | libreoffice-upstream.tar.xz libreoffice-upstream.zip |
Adding upstream version 4:7.4.7.upstream/4%7.4.7upstream
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to '')
-rw-r--r-- | solenv/gbuild/UnpackedTarball.mk | 455 |
1 files changed, 455 insertions, 0 deletions
diff --git a/solenv/gbuild/UnpackedTarball.mk b/solenv/gbuild/UnpackedTarball.mk new file mode 100644 index 000000000..fb574f6a9 --- /dev/null +++ b/solenv/gbuild/UnpackedTarball.mk @@ -0,0 +1,455 @@ +# -*- Mode: makefile-gmake; tab-width: 4; indent-tabs-mode: t -*- +# +# This file is part of the LibreOffice project. +# +# This Source Code Form is subject to the terms of the Mozilla Public +# License, v. 2.0. If a copy of the MPL was not distributed with this +# file, You can obtain one at http://mozilla.org/MPL/2.0/. +# + +# UnpackedTarget class + +# Handles unpacking of a tarball + +# platform +# gb_UnpackedTarget_TARFILE_LOCATION +# NOTE: only for commands; targets should use TARFILE_LOCATION directly + +# Location of internal copies of config.{guess,sub}. +gb_UnpackedTarball_CONFIGDIR := $(GBUILDDIR) + +define gb_UnpackedTarget__command_untar +$(GNUTAR) \ + -x \ + $(3) \ + -C $(UNPACKED_DIR) \ + $(STRIP_COMPONENTS)=$(UNPACKED_STRIP_COMPONENTS) \ + -f $(UNPACKED_TARBALL) +endef + +define gb_UnpackedTarget__command_unzip +unzip \ + -qq \ + -d $(UNPACKED_DIR) $(UNPACKED_TARBALL) \ +$(if $(filter-out 0,$(UNPACKED_STRIP_COMPONENTS)),\ + && UNZIP_DIR=`ls $(UNPACKED_DIR)` \ + && mv $(UNPACKED_DIR)/$$UNZIP_DIR/* $(UNPACKED_DIR) \ + && rm -rf $(UNPACKED_DIR)/$$UNZIP_DIR \ +) +endef + +define gb_UnpackedTarget__command +$(call gb_Output_announce,$(notdir $(2)),$(true),UPK,1) + $(call gb_Trace_StartRange,$(notdir $(2)),UPK) +$(call gb_Helper_abbreviate_dirs,\ + $(if $(wildcard $(UNPACKED_DIR)),rm -rf $(UNPACKED_DIR) &&) \ + mkdir -p $(UNPACKED_DIR) && \ + $(call gb_UnpackedTarget__command_$(1),$(2),$(3),$(4)) && \ + touch $(2) \ +) + $(call gb_Trace_EndRange,$(notdir $(2)),UPK) +endef + +$(dir $(call gb_UnpackedTarget_get_target,%)).dir : + $(if $(wildcard $(dir $@)),,mkdir -p $(dir $@)) + +$(call gb_UnpackedTarget_get_target,%).tar.bz2 : + $(call gb_UnpackedTarget__command,untar,$@,$*,-j) + +$(call gb_UnpackedTarget_get_target,%).tar.xz : + $(call gb_UnpackedTarget__command,untar,$@,$*,-J) + +$(call gb_UnpackedTarget_get_target,%).tar.gz : + $(call gb_UnpackedTarget__command,untar,$@,$*,-z) + +$(call gb_UnpackedTarget_get_target,%).tgz : + $(call gb_UnpackedTarget__command,untar,$@,$*,-z) + +$(call gb_UnpackedTarget_get_target,%).zip : + $(call gb_UnpackedTarget__command,unzip,$@,$*) + +$(call gb_UnpackedTarget_get_target,%).oxt : + $(call gb_UnpackedTarget__command,unzip,$@,$*) + +.PHONY : $(call gb_UnpackedTarget_get_clean_target,%) +$(call gb_UnpackedTarget_get_clean_target,%) : + $(call gb_Output_announce,$*,$(false),UPK,1) + $(call gb_Helper_abbreviate_dirs,\ + rm -f $(call gb_UnpackedTarget_get_target,$*) \ + ) + +# gb_UnpackedTarget_UnpackedTarget target outdir strip-components? +define gb_UnpackedTarget_UnpackedTarget +$(call gb_UnpackedTarget_get_target,$(1)) : UNPACKED_DIR := $(2) +$(call gb_UnpackedTarget_get_target,$(1)) : UNPACKED_TARBALL := $(gb_UnpackedTarget_TARFILE_LOCATION)/$(1) +$(call gb_UnpackedTarget_get_target,$(1)) : UNPACKED_STRIP_COMPONENTS := $(if $(strip $(3)),$(strip $(3)),1) + +$(call gb_UnpackedTarget_get_target,$(1)) : $(TARFILE_LOCATION)/$(1) +$(call gb_UnpackedTarget_get_target,$(1)) :| $(dir $(call gb_UnpackedTarget_get_target,$(1))).dir + +endef + +# UnpackedTarball class + +# Handles unpacking and patching of an external project +# +# The unpacked dir is recreated every time one of the patches, copied +# files or the makefile changes. + +# This is what dmake patches use. Once all external modules are +# converted, it is better to be changed to 1. +gb_UnpackedTarball_PATCHLEVEL_DEFAULT := 2 + +gb_UnpackedTarball_CONVERTTODOS = \ + $(gb_AWK) 'sub("$$","\r")' $(1) > $(1).TEMP && mv $(1).TEMP $(1) +gb_UnpackedTarball_CONVERTTOUNIX = \ + tr -d '\r' < $(1) > $(1).TEMP && mv $(1).TEMP $(1) + +define gb_UnpackedTarball__copy_files_impl +$(if $(1),\ + && cp $(firstword $(1)) $(firstword $(2)) \ + $(call gb_UnpackedTarball__copy_files_impl,$(wordlist 2,$(words $(1)),$(1)),$(wordlist 2,$(words $(2)),$(2))) \ +) +endef + +# Drop leading && +define gb_UnpackedTarball__copy_files_fix +$(wordlist 2,$(words $(1)),$(1)) +endef + +define gb_UnpackedTarball__copy_files +$(call gb_UnpackedTarball__copy_files_fix,$(call gb_UnpackedTarball__copy_files_impl,$(1),$(2))) +endef + +define gb_UnpackedTarball__command +$(call gb_Helper_abbreviate_dirs,\ + ( \ + cd $(3) \ + $(if $(UNPACKED_IS_BIN_TARBALL),,&& \ + $(if $(UNPACKED_PRE_ACTION),\ + $(UNPACKED_PRE_ACTION) && \ + ) \ + $(if $(UNPACKED_FILES),\ + mkdir -p $(sort $(dir $(UNPACKED_DESTFILES))) && \ + $(call gb_UnpackedTarball__copy_files,$(UNPACKED_FILES),$(UNPACKED_DESTFILES)) && \ + ) \ + $(foreach file,$(UNPACKED_FIX_EOL),$(call gb_UnpackedTarball_CONVERTTOUNIX,$(file)) && ) \ + $(if $(UNPACKED_PATCHES),\ + for p in $(UNPACKED_PATCHES); do \ + pl=$(UNPACKED_PATCHLEVEL); \ + s=$${p##*.}; case "$$s" in [0-9]$(CLOSE_PAREN) pl="$$s"; ;; esac ; \ + $(GNUPATCH) $(UNPACKED_PATCHFLAGS) -f -s "-p$$pl" --fuzz=0 < "$$p"; \ + if test "$$?" -ne 0; then echo "Patch FAILED: $$p"; exit 1; fi;\ + done && \ + ) \ + $(foreach file,$(UNPACKED_FIX_EOL),$(call gb_UnpackedTarball_CONVERTTODOS,$(file)) && ) \ + $(foreach confdir,$(UNPACKED_CONFIG_DIRS),\ + cp -f $(SRCDIR)/config.guess $(SRCDIR)/config.sub $(confdir) && \ + ) \ + $(if $(UNPACKED_POST_ACTION),\ + $(UNPACKED_POST_ACTION) && \ + ) \ + $(if $(gb_KEEP_PRISTINE), \ + rm -fr $(call gb_UnpackedTarball_get_pristine_dir,$(2)) && \ + cp -r $(call gb_UnpackedTarball_get_dir,$(2)) $(call gb_UnpackedTarball_get_pristine_dir,$(2)) && \ + ) \ + touch $(1) \ + )\ + ) || \ + ( \ + touch $(call gb_UnpackedTarball_get_preparation_target,$(2)) && \ + exit 1 \ + ) +) +endef + +$(dir $(call gb_UnpackedTarball_get_target,%)).dir : + $(if $(wildcard $(dir $@)),,mkdir -p $(dir $@)) + +$(call gb_UnpackedTarball_get_preparation_target,%) : + touch $@ + +$(call gb_UnpackedTarball_get_target,%) : + $(call gb_Output_announce,$*,$(true),PAT,2) + $(call gb_Trace_StartRange,$*,PAT) + $(call gb_UnpackedTarball__command,$@,$*,$(call gb_UnpackedTarball_get_dir,$*)) + $(call gb_Trace_EndRange,$*,PAT) + +$(call gb_UnpackedTarball_get_final_target,%) : + touch $@ + +.PHONY : $(call gb_UnpackedTarball_get_clean_target,%) +$(call gb_UnpackedTarball_get_clean_target,%) : + $(call gb_Output_announce,$*,$(false),PAT,2) + $(call gb_Helper_abbreviate_dirs,\ + rm -rf \ + $(call gb_UnpackedTarball_get_final_target,$*) \ + $(call gb_UnpackedTarball_get_target,$*) \ + $(call gb_UnpackedTarball_get_preparation_target,$*) \ + $(call gb_UnpackedTarball_get_dir,$*) \ + $(call gb_UnpackedTarball_get_pristine_dir,$*) \ + ) + +# Initialize unpacked tarball +define gb_UnpackedTarball_UnpackedTarball_internal +$(call gb_UnpackedTarball_get_target,$(1)) : UNPACKED_DESTFILES := +$(call gb_UnpackedTarball_get_target,$(1)) : UNPACKED_FILES := +$(call gb_UnpackedTarball_get_target,$(1)) : UNPACKED_FIX_EOL := +$(call gb_UnpackedTarball_get_target,$(1)) : UNPACKED_PATCHES := +$(call gb_UnpackedTarball_get_target,$(1)) : UNPACKED_PATCHLEVEL := $(gb_UnpackedTarball_PATCHLEVEL_DEFAULT) +$(call gb_UnpackedTarball_get_target,$(1)) : UNPACKED_PATCHFLAGS := +$(call gb_UnpackedTarball_get_target,$(1)) : UNPACKED_POST_ACTION := +$(call gb_UnpackedTarball_get_target,$(1)) : UNPACKED_PRE_ACTION := +$(call gb_UnpackedTarball_get_target,$(1)) : UNPACKED_CONFIG_DIRS := + +$(call gb_UnpackedTarball_get_preparation_target,$(1)) : $(gb_Module_CURRENTMAKEFILE) +$(call gb_UnpackedTarball_get_preparation_target,$(1)) :| $(dir $(call gb_UnpackedTarball_get_target,$(1))).dir +$(call gb_UnpackedTarball_get_target,$(1)) : $(call gb_UnpackedTarball_get_preparation_target,$(1)) +$(call gb_UnpackedTarball_get_target,$(1)) :| $(dir $(call gb_UnpackedTarball_get_target,$(1))).dir +$(call gb_UnpackedTarball_get_final_target,$(1)) : $(call gb_UnpackedTarball_get_target,$(1)) + +private gb_UnpackedTarball_PATTERN_RULES_$(1) := + +endef + +# Define a new unpacked tarball +define gb_UnpackedTarball_UnpackedTarball +$(call gb_UnpackedTarball_UnpackedTarball_internal,$(1)) + +$$(eval $$(call gb_Module_register_target,$(call gb_UnpackedTarball_get_final_target,$(1)),$(call gb_UnpackedTarball_get_clean_target,$(1)))) +$(call gb_Helper_make_userfriendly_targets,$(1),UnpackedTarball,$(call gb_UnpackedTarball_get_final_target,$(1))) + +endef + +# Convert line ending from dos to unix style for selected files +# +# This is done before applying patches, because patches expect unix +# style line ending, and the files are converted back after that. The +# files are relative to the unpacked path. +# +# gb_UnpackedTarball_fix_end_of_line unpacked file(s) +define gb_UnpackedTarball_fix_end_of_line +$(call gb_UnpackedTarball_get_target,$(1)) : UNPACKED_FIX_EOL += $(addprefix $(call gb_UnpackedTarball_get_dir,$(1))/,$(2)) + +endef + + +# Internal version of set_tarball, mostly to avoid repeated invocation of $(shell +define gb_UnpackedTarball_set_tarball_internal +$(call gb_UnpackedTarget_UnpackedTarget,$(2),$(call gb_UnpackedTarball_get_dir,$(1)),$(3),$(4)) +$(call gb_UnpackedTarball_get_target,$(1)) : $(call gb_UnpackedTarget_get_target,$(2)) +$(call gb_UnpackedTarball_get_clean_target,$(1)) : $(call gb_UnpackedTarget_get_clean_target,$(2)) +$(call gb_UnpackedTarget_get_target,$(2)) : $(call gb_UnpackedTarball_get_preparation_target,$(1)) +$(if $(findstring in,$(5)), +$(call gb_UnpackedTarball_get_target,$(1)) : UNPACKED_IS_BIN_TARBALL := YES +$(call gb_ExternalProject_get_state_target,$(1),%) : UNPACKED_IS_BIN_TARBALL := YES) +$(if $(findstring out,$(5)),$(call gb_Module_get_target,$(4)) : $(TARFILE_LOCATION)/$(6) +$(TARFILE_LOCATION)/$(6) : $(call gb_Module_get_nonl10n_target,$(4)) + $$(call gb_Output_announce,$(6),$(true),PKB,3) + $$(call gb_Trace_StartRange,$(6),PKB) + if test ! -f "$$@" ; then cd $(call gb_UnpackedTarball_get_dir,) && $(GNUTAR) -czf "$$@" $(1)/ || $(GNUTAR) -czf "$$@" $(1)/ ; else touch "$$@" ; fi + $$(call gb_Trace_EndRange,$(6),PKB) +) + +endef + +# Set tarball name +# +# gb_UnpackedTarball_set_tarball unpacked tarball-name +define gb_UnpackedTarball_set_tarball +$(if $(USE_LIBRARY_BIN_TAR), +$(if $(4), +$(if $(shell "$(SRCDIR)/solenv/bin/bin_library_info.sh" -l "$(gb_UnpackedTarget_TARFILE_LOCATION)" -o "$(4)" -b "$(BUILDDIR)" -s "$(SRCDIR)" -t "$(2)" -m verify -p "$(OS)_$(CPUNAME)"), +$(call gb_UnpackedTarball_set_tarball_internal,$(1),$(shell "$(SRCDIR)/solenv/bin/bin_library_info.sh" -l "$(gb_UnpackedTarget_TARFILE_LOCATION)" -o "$(4)" -b "$(BUILDDIR)" -s "$(SRCDIR)" -t "$(2)" -m verify -p "$(OS)_$(CPUNAME)"),$(3),$(4),in),\ +$(call gb_UnpackedTarball_set_tarball_internal,$(1),$(2),$(3),$(4),out,$(shell "$(SRCDIR)/solenv/bin/bin_library_info.sh" -l "$(gb_UnpackedTarget_TARFILE_LOCATION)" -o "$(4)" -b "$(BUILDDIR)" -s "$(SRCDIR)" -t "$(2)" -m name -p "$(OS)_$(CPUNAME)"))) +, +$(call gb_UnpackedTarball_set_tarball_internal,$(1),$(2),$(3),$(4),) +) +, +$(call gb_UnpackedTarball_set_tarball_internal,$(1),$(2),$(3),$(4),) +) + +endef + +# Set patch level to be used for all patches +# +# The default value is 3 to be able to work with current dmake patches. +# +# gb_UnpackedTarball_set_patchlevel unpacked level +define gb_UnpackedTarball_set_patchlevel +$(call gb_UnpackedTarball_get_target,$(1)) : UNPACKED_PATCHLEVEL := $(2) + +endef + +# Add patch flags to be passed to patch for all patches cf. fdo#66826 +# +# gb_UnpackedTarball_set_patchlevel unpacked level +define gb_UnpackedTarball_set_patchflags +$(call gb_UnpackedTarball_get_target,$(1)) : UNPACKED_PATCHFLAGS := $(2) + +endef + +# Add a patch to be applied on the unpacked files +# +# gb_UnpackedTarball_add_patch unpacked patch +define gb_UnpackedTarball_add_patch +$(call gb_UnpackedTarball_get_target,$(1)) : UNPACKED_PATCHES += $(SRCDIR)/$(2) +$(call gb_UnpackedTarball_get_preparation_target,$(1)) : $(SRCDIR)/$(2) + +endef + +# Add several patches at once +# +# gb_UnpackedTarball_add_patches unpacked patch(es) +define gb_UnpackedTarball_add_patches +$(foreach patch,$(2),$(call gb_UnpackedTarball_add_patch,$(1),$(patch))) + +endef + +# Add a file from source dir to the unpacked dir +# +# This function should not be used for overwriting existing files--use a +# patch for that purpose. +# +# gb_UnpackedTarball_add_file unpacked destfile file +define gb_UnpackedTarball_add_file +$(call gb_UnpackedTarball_get_target,$(1)) : UNPACKED_FILES += $(SRCDIR)/$(3) +$(call gb_UnpackedTarball_get_target,$(1)) : UNPACKED_DESTFILES += $(call gb_UnpackedTarball_get_dir,$(1))/$(2) +$(call gb_UnpackedTarball_get_preparation_target,$(1)) : $(SRCDIR)/$(3) + +endef + +# Add several files(s) from source dir to the unpacked dir +# +# The files are added into the specified subdir. +# +# gb_UnpackedTarball_add_files unpacked subdir file(s) +define gb_UnpackedTarball_add_files +$(foreach file,$(3),$(call gb_UnpackedTarball_add_file,$(1),$(2)/$(notdir $(file)),$(file))) + +endef + +# Set arbitrary shell command to be run during unpack +# +# The command is run at the very beginning, in freshly unpacked tarball. +# The command is run in the unpacked directory. If more than one command +# is used, care should be taken that the whole command fails if either +# of the sub-commands fails. +# +# gb_UnpackedTarball_set_pre_action unpacked shell-command +define gb_UnpackedTarball_set_pre_action +$(call gb_UnpackedTarball_get_target,$(1)) : UNPACKED_PRE_ACTION := $(strip $(2)) + +endef + +# Set arbitrary shell command to be run during unpack +# +# The command is run at the very end: after patching, C++ extension +# mangling and copying additional files in. The command is run in the +# unpacked directory. If more than one command is used, care should be +# taken that the whole command fails if either of the sub-commands +# fails. +# +# NOTE: This is a bit hackish, but it is the easiest way to move files +# around or delete files (typically because the file causes build +# problems in the original location, c.f. clucene). This is doable by +# using -E with patch (we use GNU patch anyway), but it would mean an +# additional patch to maintain... +# +# gb_UnpackedTarball_set_post_action unpacked shell-command +define gb_UnpackedTarball_set_post_action +$(call gb_UnpackedTarball_get_target,$(1)) : UNPACKED_POST_ACTION := $(strip $(2)) + +endef + +define gb_UnpackedTarbal__make_pattern_rule +$(call gb_UnpackedTarball_get_dir,$(1))/%$(2) : + $$(if $$(wildcard $$@),,$$(call gb_Output_error,file $$@ does not exist in the tarball)) + $$(if $$(UNPACKED_MODE),chmod $$(UNPACKED_MODE) $$@ &&) \ + touch $$@ + +$(eval gb_UnpackedTarball_PATTERN_RULES_$(1) += $(2)) + +endef + +define gb_UnpackedTarbal__ensure_pattern_rule +$(if $(filter $(2),$(gb_UnpackedTarball_PATTERN_RULES_$(1))),,$(call gb_UnpackedTarbal__make_pattern_rule,$(1),$(2))) + +endef + +define gb_UnpackedTarbal__make_file_rule +$(call gb_UnpackedTarball_get_dir,$(1))/$(2) : + $$(if $$(wildcard $$@),,$$(call gb_Output_error,file $$@ does not exist in the tarball)) + $$(if $$(UNPACKED_MODE),chmod $$(UNPACKED_MODE) $$@ &&) \ + touch $$@ + +endef + +# Mark a source file to be used outside of this module +# +# This results in the timestamp of the file being updated, so a possible +# change is recognized properly by other files depending on it. The +# update is run after possible post action. +# +# See description of class ExternalPackage for more information. +# +# gb_UnpackedTarball_mark_output_file unpacked file +define gb_UnpackedTarball_mark_output_file +$(call gb_UnpackedTarball_get_final_target,$(1)) : $(call gb_UnpackedTarball_get_dir,$(1))/$(2) +$(call gb_UnpackedTarball_get_dir,$(1))/$(2) : $(call gb_UnpackedTarball_get_target,$(1)) +$(call gb_UnpackedTarball_get_dir,$(1))/$(2) : UNPACKED_MODE := 644 +$(if $(suffix $(2)),\ + $(call gb_UnpackedTarbal__ensure_pattern_rule,$(1),$(suffix $(2))),\ + $(call gb_UnpackedTarbal__make_file_rule,$(1),$(2)) \ +) + +endef + +# Mark several source files to be used outside of this module +# +# gb_UnpackedTarball_mark_output_files unpacked file(s) +define gb_UnpackedTarball_mark_output_files +$(foreach file,$(2),$(call gb_UnpackedTarball_mark_output_file,$(1),$(file))) + +endef + +# Replace project's config.{guess,sub} files by internal copies +# +# This is useful if the project's config files are outdated and don't +# allow build on some new arch. The internal copies are located at +# gb_UnpackedTarball_CONFIGDIR. +# +# If the configs are placed somewhere else than in the top-level dir of +# the project, pass the (relative) dir as second argument. (It can even +# be a list of dirs, if the project contains multiple subprojects, each +# with its own configure.) +# +# gb_UnpackedTarball_update_autoconf_configs unpacked dirs(s)? +define gb_UnpackedTarball_update_autoconf_configs +$(call gb_UnpackedTarball_get_target,$(1)) : UNPACKED_CONFIG_DIRS += $(if $(strip $(2)),$(2),.) + +endef + +# force the rebuild of an external target +# this only works when running as partial build. +# +%.rebuild : + if [ -f $(call gb_UnpackedTarball_get_target,$*) ] ; then \ + touch $(call gb_UnpackedTarball_get_target,$*) ; \ + $(MAKE) ;\ + fi + +%.genpatch : + if [ -d $(call gb_UnpackedTarball_get_dir,$*) -a -d $(call gb_UnpackedTarball_get_pristine_dir,$*) ] ; then \ + ( \ + patch_file=$$(pwd)/$*.new.patch.1; \ + cd $(call gb_UnpackedTarball_get_dir,) ; \ + diff -ur $*.org $* > $$patch_file; \ + echo "Patch $$patch_file generated" ; \ + ); \ + else \ + echo "Error: No pristine tarball available for $*" 1>&2 ; \ + fi + + +# vim: set noet sw=4 ts=4: |