Adding upstream version 4:7.4.7.upstream/4%7.4.7upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

11 files changed, 1371 insertions, 0 deletions

diff --git a/vcl/inc/skia/gdiimpl.hxx b/vcl/inc/skia/gdiimpl.hxx
new file mode 100644
index 000000000..b2814b2a6
--- /dev/null
+++ b/vcl/inc/skia/gdiimpl.hxx
@@ -0,0 +1,436 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+#ifndef INCLUDED_VCL_SKIA_GDIIMPL_HXX
+#define INCLUDED_VCL_SKIA_GDIIMPL_HXX
+
+#include <vcl/dllapi.h>
+
+#include <salgdiimpl.hxx>
+#include <salgeom.hxx>
+
+#include <skia/utils.hxx>
+
+#include <SkPaint.h>
+
+class SkiaFlushIdle;
+class GenericSalLayout;
+class SkFont;
+class SkiaSalBitmap;
+
+class VCL_DLLPUBLIC SkiaSalGraphicsImpl : public SalGraphicsImpl
+{
+public:
+    SkiaSalGraphicsImpl(SalGraphics& pParent, SalGeometryProvider* pProvider);
+    virtual ~SkiaSalGraphicsImpl() override;
+
+    virtual void Init() override;
+
+    virtual void DeInit() override;
+
+    virtual OUString getRenderBackendName() const override { return "skia"; }
+
+    const vcl::Region& getClipRegion() const;
+    virtual bool setClipRegion(const vcl::Region&) override;
+
+    //
+    // get the depth of the device
+    virtual sal_uInt16 GetBitCount() const override;
+
+    // get the width of the device
+    virtual tools::Long GetGraphicsWidth() const override;
+
+    // set the clip region to empty
+    virtual void ResetClipRegion() override;
+
+    // set the line color to transparent (= don't draw lines)
+
+    virtual void SetLineColor() override;
+
+    // set the line color to a specific color
+    virtual void SetLineColor(Color nColor) override;
+
+    // set the fill color to transparent (= don't fill)
+    virtual void SetFillColor() override;
+
+    // set the fill color to a specific color, shapes will be
+    // filled accordingly
+    virtual void SetFillColor(Color nColor) override;
+
+    // enable/disable XOR drawing
+    virtual void SetXORMode(bool bSet, bool bInvertOnly) override;
+
+    // set line color for raster operations
+    virtual void SetROPLineColor(SalROPColor nROPColor) override;
+
+    // set fill color for raster operations
+    virtual void SetROPFillColor(SalROPColor nROPColor) override;
+
+    // draw --> LineColor and FillColor and RasterOp and ClipRegion
+    virtual void drawPixel(tools::Long nX, tools::Long nY) override;
+    virtual void drawPixel(tools::Long nX, tools::Long nY, Color nColor) override;
+
+    virtual void drawLine(tools::Long nX1, tools::Long nY1, tools::Long nX2,
+                          tools::Long nY2) override;
+
+    virtual void drawRect(tools::Long nX, tools::Long nY, tools::Long nWidth,
+                          tools::Long nHeight) override;
+
+    virtual void drawPolyLine(sal_uInt32 nPoints, const Point* pPtAry) override;
+
+    virtual void drawPolygon(sal_uInt32 nPoints, const Point* pPtAry) override;
+
+    virtual void drawPolyPolygon(sal_uInt32 nPoly, const sal_uInt32* pPoints,
+                                 const Point** pPtAry) override;
+
+    virtual bool drawPolyPolygon(const basegfx::B2DHomMatrix& rObjectToDevice,
+                                 const basegfx::B2DPolyPolygon&, double fTransparency) override;
+
+    virtual bool drawPolyLine(const basegfx::B2DHomMatrix& rObjectToDevice,
+                              const basegfx::B2DPolygon&, double fTransparency, double fLineWidth,
+                              const std::vector<double>* pStroke, basegfx::B2DLineJoin,
+                              css::drawing::LineCap, double fMiterMinimumAngle,
+                              bool bPixelSnapHairline) override;
+
+    virtual bool drawPolyLineBezier(sal_uInt32 nPoints, const Point* pPtAry,
+                                    const PolyFlags* pFlgAry) override;
+
+    virtual bool drawPolygonBezier(sal_uInt32 nPoints, const Point* pPtAry,
+                                   const PolyFlags* pFlgAry) override;
+
+    virtual bool drawPolyPolygonBezier(sal_uInt32 nPoly, const sal_uInt32* pPoints,
+                                       const Point* const* pPtAry,
+                                       const PolyFlags* const* pFlgAry) override;
+
+    // CopyArea --> No RasterOp, but ClipRegion
+    virtual void copyArea(tools::Long nDestX, tools::Long nDestY, tools::Long nSrcX,
+                          tools::Long nSrcY, tools::Long nSrcWidth, tools::Long nSrcHeight,
+                          bool bWindowInvalidate) override;
+
+    virtual void copyBits(const SalTwoRect& rPosAry, SalGraphics* pSrcGraphics) override;
+
+    virtual bool blendBitmap(const SalTwoRect&, const SalBitmap& rBitmap) override;
+
+    virtual bool blendAlphaBitmap(const SalTwoRect&, const SalBitmap& rSrcBitmap,
+                                  const SalBitmap& rMaskBitmap,
+                                  const SalBitmap& rAlphaBitmap) override;
+
+    virtual void drawBitmap(const SalTwoRect& rPosAry, const SalBitmap& rSalBitmap) override;
+
+    virtual void drawBitmap(const SalTwoRect& rPosAry, const SalBitmap& rSalBitmap,
+                            const SalBitmap& rMaskBitmap) override;
+
+    virtual void drawMask(const SalTwoRect& rPosAry, const SalBitmap& rSalBitmap,
+                          Color nMaskColor) override;
+
+    virtual std::shared_ptr<SalBitmap> getBitmap(tools::Long nX, tools::Long nY, tools::Long nWidth,
+                                                 tools::Long nHeight) override;
+
+    virtual Color getPixel(tools::Long nX, tools::Long nY) override;
+
+    // invert --> ClipRegion (only Windows or VirDevs)
+    virtual void invert(tools::Long nX, tools::Long nY, tools::Long nWidth, tools::Long nHeight,
+                        SalInvert nFlags) override;
+
+    virtual void invert(sal_uInt32 nPoints, const Point* pPtAry, SalInvert nFlags) override;
+
+    virtual bool drawEPS(tools::Long nX, tools::Long nY, tools::Long nWidth, tools::Long nHeight,
+                         void* pPtr, sal_uInt32 nSize) override;
+
+    /** Render bitmap with alpha channel
+
+        @param rSourceBitmap
+        Source bitmap to blit
+
+        @param rAlphaBitmap
+        Alpha channel to use for blitting
+
+        @return true, if the operation succeeded, and false
+        otherwise. In this case, clients should try to emulate alpha
+        compositing themselves
+     */
+    virtual bool drawAlphaBitmap(const SalTwoRect&, const SalBitmap& rSourceBitmap,
+                                 const SalBitmap& rAlphaBitmap) override;
+
+    /** draw transformed bitmap (maybe with alpha) where Null, X, Y define the coordinate system */
+    virtual bool drawTransformedBitmap(const basegfx::B2DPoint& rNull, const basegfx::B2DPoint& rX,
+                                       const basegfx::B2DPoint& rY, const SalBitmap& rSourceBitmap,
+                                       const SalBitmap* pAlphaBitmap, double fAlpha) override;
+
+    virtual bool hasFastDrawTransformedBitmap() const override;
+
+    /** Render solid rectangle with given transparency
+
+      @param nX             Top left coordinate of rectangle
+
+      @param nY             Bottom right coordinate of rectangle
+
+      @param nWidth         Width of rectangle
+
+      @param nHeight        Height of rectangle
+
+      @param nTransparency  Transparency value (0-255) to use. 0 blits and opaque, 255 a
+                            fully transparent rectangle
+
+      @returns true if successfully drawn, false if not able to draw rectangle
+     */
+    virtual bool drawAlphaRect(tools::Long nX, tools::Long nY, tools::Long nWidth,
+                               tools::Long nHeight, sal_uInt8 nTransparency) override;
+
+    virtual bool drawGradient(const tools::PolyPolygon& rPolygon,
+                              const Gradient& rGradient) override;
+    virtual bool implDrawGradient(const basegfx::B2DPolyPolygon& rPolyPolygon,
+                                  const SalGradient& rGradient) override;
+
+    virtual bool supportsOperation(OutDevSupportType eType) const override;
+
+    // Dump contents to a file for debugging.
+    void dump(const char* file) const;
+
+    // Default blend mode for SkPaint is SkBlendMode::kSrcOver
+    void drawBitmap(const SalTwoRect& rPosAry, const SkiaSalBitmap& bitmap,
+                    SkBlendMode blendMode = SkBlendMode::kSrcOver);
+
+    void drawImage(const SalTwoRect& rPosAry, const sk_sp<SkImage>& aImage, int srcScaling = 1,
+                   SkBlendMode eBlendMode = SkBlendMode::kSrcOver);
+
+    void drawShader(const SalTwoRect& rPosAry, const sk_sp<SkShader>& shader,
+                    SkBlendMode blendMode = SkBlendMode::kSrcOver);
+
+    void drawGenericLayout(const GenericSalLayout& layout, Color textColor, const SkFont& font,
+                           const SkFont& verticalFont);
+
+protected:
+    // To be called before any drawing.
+    void preDraw();
+    // To be called after any drawing.
+    void postDraw();
+    // The canvas to draw to.
+    SkCanvas* getDrawCanvas() { return mSurface->getCanvas(); }
+    // Call before makeImageSnapshot(), ensures the content is up to date.
+    void flushDrawing();
+
+    virtual void createSurface();
+    // Call to ensure that mSurface is valid. If mSurface is going to be modified,
+    // use preDraw() instead of this.
+    void checkSurface();
+    void destroySurface();
+    // Reimplemented for X11.
+    virtual bool avoidRecreateByResize() const;
+    void createWindowSurface(bool forceRaster = false);
+    virtual void createWindowSurfaceInternal(bool forceRaster = false) = 0;
+    void createOffscreenSurface();
+    virtual void flushSurfaceToWindowContext();
+
+    void privateDrawAlphaRect(tools::Long nX, tools::Long nY, tools::Long nWidth,
+                              tools::Long nHeight, double nTransparency, bool blockAA = false);
+    void privateCopyBits(const SalTwoRect& rPosAry, SkiaSalGraphicsImpl* src);
+
+    void setProvider(SalGeometryProvider* provider) { mProvider = provider; }
+
+    bool isOffscreen() const;
+    bool isGPU() const { return mIsGPU; }
+
+    void invert(basegfx::B2DPolygon const& rPoly, SalInvert eFlags);
+
+    // Called by SkiaFlushIdle.
+    void performFlush();
+    void scheduleFlush();
+    friend class SkiaFlushIdle;
+
+    // get the width of the device
+    int GetWidth() const { return mProvider ? mProvider->GetWidth() : 1; }
+    // get the height of the device
+    int GetHeight() const { return mProvider ? mProvider->GetHeight() : 1; }
+    // Get the global HiDPI scaling factor.
+    virtual int getWindowScaling() const;
+
+    void addUpdateRegion(const SkRect& rect)
+    {
+        // Make slightly larger, just in case (rounding, antialiasing,...).
+        SkIRect addedRect = rect.makeOutset(2, 2).round();
+        // Using SkIRect should be enough, SkRegion would be too slow with many operations
+        // and swapping to the screen is not _that_slow.
+        mDirtyRect.join(addedRect);
+    }
+    void setCanvasScalingAndClipping();
+    void resetCanvasScalingAndClipping();
+    static void setCanvasClipRegion(SkCanvas* canvas, const vcl::Region& region);
+    sk_sp<SkImage> mergeCacheBitmaps(const SkiaSalBitmap& bitmap, const SkiaSalBitmap* alphaBitmap,
+                                     const Size& targetSize);
+    using DirectImage = SkiaHelper::DirectImage;
+    static OString makeCachedImageKey(const SkiaSalBitmap& bitmap, const SkiaSalBitmap* alphaBitmap,
+                                      const Size& targetSize, DirectImage bitmapType,
+                                      DirectImage alphaBitmapType);
+
+    // Skia uses floating point coordinates, so when we use integer coordinates, sometimes
+    // rounding results in off-by-one errors (down), especially when drawing using GPU,
+    // see https://bugs.chromium.org/p/skia/issues/detail?id=9611 . Compensate for
+    // it by using centers of pixels. Using 0.5 may sometimes round up, so go with 0.495 .
+    static constexpr SkScalar toSkX(tools::Long x) { return x + 0.495; }
+    static constexpr SkScalar toSkY(tools::Long y) { return y + 0.495; }
+    // Value to add to be exactly in the middle of the pixel.
+    static constexpr SkScalar toSkXYFix = SkScalar(0.005);
+
+    // Perform any pending drawing such as delayed merging of polygons. Called by preDraw()
+    // and anything that means the next operation cannot be another one in a series (e.g.
+    // changing colors).
+    void checkPendingDrawing();
+    bool delayDrawPolyPolygon(const basegfx::B2DPolyPolygon& polygon, double transparency);
+    void performDrawPolyPolygon(const basegfx::B2DPolyPolygon& polygon, double transparency,
+                                bool useAA);
+
+    BmpScaleFlag goodScalingQuality() const { return SkiaHelper::goodScalingQuality(isGPU()); }
+    SkSamplingOptions makeSamplingOptions(const SalTwoRect& rPosAry, int scalingFactor,
+                                          int srcScalingFactor = 1)
+    {
+        return SkiaHelper::makeSamplingOptions(rPosAry, scalingFactor, srcScalingFactor, isGPU());
+    }
+    SkSamplingOptions makeSamplingOptions(const SkMatrix& matrix, int scalingFactor)
+    {
+        return SkiaHelper::makeSamplingOptions(goodScalingQuality(), matrix, scalingFactor);
+    }
+
+    // Create SkPaint to use when drawing to the surface. It is not to be used
+    // when doing internal drawing such as when merging two bitmaps together.
+    // This may apply some default settings to the paint as necessary.
+    SkPaint makePaintInternal() const;
+    // Create SkPaint set up for drawing lines (using mLineColor etc.).
+    SkPaint makeLinePaint(double transparency = 0) const;
+    // Create SkPaint set up for filling (using mFillColor etc.).
+    SkPaint makeFillPaint(double transparency = 0) const;
+    // Create SkPaint set up for bitmap drawing.
+    SkPaint makeBitmapPaint() const;
+    // Create SkPaint set up for gradient drawing.
+    SkPaint makeGradientPaint() const;
+    // Create SkPaint set up for text drawing.
+    SkPaint makeTextPaint(Color color) const;
+    // Create SkPaint for unspecified pixel drawing. Avoid if possible.
+    SkPaint makePixelPaint(Color color) const;
+
+    template <typename charT, typename traits>
+    friend inline std::basic_ostream<charT, traits>&
+    operator<<(std::basic_ostream<charT, traits>& stream, const SkiaSalGraphicsImpl* graphics)
+    {
+        if (graphics == nullptr)
+            return stream << "(null)";
+        // O - offscreen, G - GPU-based, R - raster
+        stream << static_cast<const void*>(graphics) << " "
+               << Size(graphics->GetWidth(), graphics->GetHeight());
+        if (graphics->mScaling != 1)
+            stream << "*" << graphics->mScaling;
+        stream << (graphics->isGPU() ? "G" : "R") << (graphics->isOffscreen() ? "O" : "");
+        return stream;
+    }
+
+    SalGraphics& mParent;
+    /// Pointer to the SalFrame or SalVirtualDevice
+    SalGeometryProvider* mProvider;
+    // The Skia surface that is target of all the rendering.
+    sk_sp<SkSurface> mSurface;
+    // Note that mSurface may be a proxy surface and not the one from the window context.
+    std::unique_ptr<sk_app::WindowContext> mWindowContext;
+    bool mIsGPU; // whether the surface is GPU-backed
+    // Note that we generally use VCL coordinates, which is not mSurface coordinates if mScaling!=1.
+    SkIRect mDirtyRect; // The area that has been changed since the last performFlush().
+    vcl::Region mClipRegion;
+    Color mLineColor;
+    Color mFillColor;
+    enum class XorMode
+    {
+        None,
+        Invert,
+        Xor
+    };
+    XorMode mXorMode;
+    std::unique_ptr<SkiaFlushIdle> mFlush;
+    // Info about pending polygons to draw (we try to merge adjacent polygons into one).
+    struct LastPolyPolygonInfo
+    {
+        basegfx::B2DPolyPolygonVector polygons;
+        basegfx::B2DRange bounds;
+        double transparency;
+    };
+    LastPolyPolygonInfo mLastPolyPolygonInfo;
+    inline static int pendingOperationsToFlush = 0;
+    int mScaling; // The scale factor for HiDPI screens.
+};
+
+inline SkPaint SkiaSalGraphicsImpl::makePaintInternal() const
+{
+    SkPaint paint;
+    // Invert could be done using a blend mode like invert() does, but
+    // intentionally use SkBlender to make sure it's not overwritten
+    // by a blend mode set later (which would be probably a mistake),
+    // and so that the drawing color does not actually matter.
+    if (mXorMode == XorMode::Invert)
+        SkiaHelper::setBlenderInvert(&paint);
+    else if (mXorMode == XorMode::Xor)
+        SkiaHelper::setBlenderXor(&paint);
+    return paint;
+}
+
+inline SkPaint SkiaSalGraphicsImpl::makeLinePaint(double transparency) const
+{
+    assert(mLineColor != SALCOLOR_NONE);
+    SkPaint paint = makePaintInternal();
+    paint.setColor(transparency == 0
+                       ? SkiaHelper::toSkColor(mLineColor)
+                       : SkiaHelper::toSkColorWithTransparency(mLineColor, transparency));
+    paint.setStyle(SkPaint::kStroke_Style);
+    return paint;
+}
+
+inline SkPaint SkiaSalGraphicsImpl::makeFillPaint(double transparency) const
+{
+    assert(mFillColor != SALCOLOR_NONE);
+    SkPaint paint = makePaintInternal();
+    paint.setColor(transparency == 0
+                       ? SkiaHelper::toSkColor(mFillColor)
+                       : SkiaHelper::toSkColorWithTransparency(mFillColor, transparency));
+    if (mLineColor == mFillColor)
+        paint.setStyle(SkPaint::kStrokeAndFill_Style);
+    else
+        paint.setStyle(SkPaint::kFill_Style);
+    return paint;
+}
+
+inline SkPaint SkiaSalGraphicsImpl::makeBitmapPaint() const { return makePaintInternal(); }
+
+inline SkPaint SkiaSalGraphicsImpl::makeGradientPaint() const { return makePaintInternal(); }
+
+inline SkPaint SkiaSalGraphicsImpl::makeTextPaint(Color color) const
+{
+    assert(color != SALCOLOR_NONE);
+    SkPaint paint = makePaintInternal();
+    paint.setColor(SkiaHelper::toSkColor(color));
+    return paint;
+}
+
+inline SkPaint SkiaSalGraphicsImpl::makePixelPaint(Color color) const
+{
+    assert(color != SALCOLOR_NONE);
+    SkPaint paint = makePaintInternal();
+    paint.setColor(SkiaHelper::toSkColor(color));
+    return paint;
+}
+
+#endif
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
diff --git a/vcl/inc/skia/osx/bitmap.hxx b/vcl/inc/skia/osx/bitmap.hxx
new file mode 100644
index 000000000..0c0b1ee09
--- /dev/null
+++ b/vcl/inc/skia/osx/bitmap.hxx
@@ -0,0 +1,26 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ */
+
+#ifndef INCLUDED_VCL_INC_SKIA_OSX_BITMAP_HXX
+#define INCLUDED_VCL_INC_SKIA_OSX_BITMAP_HXX
+
+#include <vcl/dllapi.h>
+
+#include <osx/osxvcltypes.h>
+
+class Image;
+
+namespace SkiaHelper
+{
+VCL_PLUGIN_PUBLIC CGImageRef createCGImage(const Image& rImage);
+};
+
+#endif // INCLUDED_VCL_INC_SKIA_OSX_BITMAP_HXX
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
diff --git a/vcl/inc/skia/osx/gdiimpl.hxx b/vcl/inc/skia/osx/gdiimpl.hxx
new file mode 100644
index 000000000..71baf2462
--- /dev/null
+++ b/vcl/inc/skia/osx/gdiimpl.hxx
@@ -0,0 +1,57 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ */
+
+#ifndef INCLUDED_VCL_INC_SKIA_OSX_GDIIMPL_HXX
+#define INCLUDED_VCL_INC_SKIA_OSX_GDIIMPL_HXX
+
+#include <vcl/dllapi.h>
+
+#include <quartz/salgdi.h>
+
+#include <skia/gdiimpl.hxx>
+#include <skia/utils.hxx>
+
+#include <SkFontMgr.h>
+
+class VCL_PLUGIN_PUBLIC AquaSkiaSalGraphicsImpl final : public SkiaSalGraphicsImpl,
+                                                        public AquaGraphicsBackendBase
+{
+public:
+    AquaSkiaSalGraphicsImpl(AquaSalGraphics& rParent, AquaSharedAttributes& rShared);
+    virtual ~AquaSkiaSalGraphicsImpl() override;
+
+    virtual void freeResources() override;
+
+    virtual void UpdateGeometryProvider(SalGeometryProvider* provider) override
+    {
+        setProvider(provider);
+    }
+    static void prepareSkia();
+
+    virtual bool drawNativeControl(ControlType nType, ControlPart nPart,
+                                   const tools::Rectangle& rControlRegion, ControlState nState,
+                                   const ImplControlValue& aValue) override;
+
+    virtual void drawTextLayout(const GenericSalLayout& layout,
+                                bool bTextRenderModeForResolutionIndependentLayout) override;
+
+    virtual void Flush() override;
+    virtual void Flush(const tools::Rectangle&) override;
+
+private:
+    virtual int getWindowScaling() const override;
+    virtual void createWindowSurfaceInternal(bool forceRaster = false) override;
+    virtual void flushSurfaceToWindowContext() override;
+    void flushSurfaceToScreenCG();
+    static inline sk_sp<SkFontMgr> fontManager;
+};
+
+#endif // INCLUDED_VCL_INC_SKIA_OSX_GDIIMPL_HXX
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
diff --git a/vcl/inc/skia/salbmp.hxx b/vcl/inc/skia/salbmp.hxx
new file mode 100644
index 000000000..05e489643
--- /dev/null
+++ b/vcl/inc/skia/salbmp.hxx
@@ -0,0 +1,222 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+#ifndef INCLUDED_VCL_INC_SKIA_SALBMP_H
+#define INCLUDED_VCL_INC_SKIA_SALBMP_H
+
+#include <salbmp.hxx>
+#include <vcl/bitmap.hxx>
+
+#include <boost/shared_ptr.hpp>
+
+#include <skia/utils.hxx>
+
+#include <SkImage.h>
+
+class VCL_PLUGIN_PUBLIC SkiaSalBitmap final : public SalBitmap
+{
+public:
+    SkiaSalBitmap();
+    SkiaSalBitmap(const sk_sp<SkImage>& image);
+    virtual ~SkiaSalBitmap() override;
+
+    // SalBitmap methods
+    virtual bool Create(const Size& rSize, vcl::PixelFormat ePixelFormat,
+                        const BitmapPalette& rPal) override;
+    virtual bool Create(const SalBitmap& rSalBmp) override;
+    virtual bool Create(const SalBitmap& rSalBmp, SalGraphics* pGraphics) override;
+    virtual bool Create(const SalBitmap& rSalBmp, vcl::PixelFormat eNewPixelFormat) override;
+    virtual bool Create(const css::uno::Reference<css::rendering::XBitmapCanvas>& rBitmapCanvas,
+                        Size& rSize, bool bMask = false) override;
+
+    virtual void Destroy() final override;
+
+    virtual Size GetSize() const override;
+    virtual sal_uInt16 GetBitCount() const override;
+
+    virtual BitmapBuffer* AcquireBuffer(BitmapAccessMode nMode) override;
+    virtual void ReleaseBuffer(BitmapBuffer* pBuffer, BitmapAccessMode nMode) override;
+
+    virtual bool GetSystemData(BitmapSystemData& rData) override;
+
+    virtual bool ScalingSupported() const override;
+    virtual bool Scale(const double& rScaleX, const double& rScaleY,
+                       BmpScaleFlag nScaleFlag) override;
+    virtual bool Replace(const Color& rSearchColor, const Color& rReplaceColor,
+                         sal_uInt8 nTol) override;
+    virtual bool InterpretAs8Bit() override;
+    virtual bool ConvertToGreyscale() override;
+    virtual bool Erase(const Color& color) override;
+    virtual bool AlphaBlendWith(const SalBitmap& rSalBmp) override;
+
+    const BitmapPalette& Palette() const { return mPalette; }
+
+    // True if GetSkShader() should be preferred to GetSkImage() (or the Alpha variants).
+    bool PreferSkShader() const;
+
+    // Direct image means direct access to the stored SkImage, without checking
+    // if its size is up to date. This should be used only in special cases with care.
+    using DirectImage = SkiaHelper::DirectImage;
+    // Returns the contents as SkImage (possibly GPU-backed).
+    const sk_sp<SkImage>& GetSkImage(DirectImage direct = DirectImage::No) const;
+    sk_sp<SkShader> GetSkShader(const SkSamplingOptions& samplingOptions,
+                                DirectImage direct = DirectImage::No) const;
+    // Returns the contents as alpha SkImage (possibly GPU-backed)
+    const sk_sp<SkImage>& GetAlphaSkImage(DirectImage direct = DirectImage::No) const;
+    sk_sp<SkShader> GetAlphaSkShader(const SkSamplingOptions& samplingOptions,
+                                     DirectImage direct = DirectImage::No) const;
+
+    // Key for caching/hashing.
+    OString GetImageKey(DirectImage direct = DirectImage::No) const;
+    OString GetAlphaImageKey(DirectImage direct = DirectImage::No) const;
+
+    // Returns true if it is known that this bitmap can be ignored if it's to be used
+    // as an alpha bitmap. An optimization, not guaranteed to return true for all such cases.
+    bool IsFullyOpaqueAsAlpha() const;
+    // Alpha type best suitable for the content.
+    SkAlphaType alphaType() const;
+
+    // Tries to create direct GetAlphaSkImage() from direct GetSkImage().
+    void TryDirectConvertToAlphaNoScaling();
+
+    // Dump contents to a file for debugging.
+    void dump(const char* file) const;
+
+    // These are to be used only by unittests.
+    bool unittestHasBuffer() const { return mBuffer.get(); }
+    bool unittestHasImage() const { return mImage.get(); }
+    bool unittestHasAlphaImage() const { return mAlphaImage.get(); }
+    bool unittestHasEraseColor() const { return mEraseColorSet; }
+    bool unittestHasPendingScale() const { return mSize != mPixelsSize; }
+    const sal_uInt8* unittestGetBuffer() const { return mBuffer.get(); }
+    const SkImage* unittestGetImage() const { return mImage.get(); }
+    const SkImage* unittestGetAlphaImage() const { return mAlphaImage.get(); }
+    void unittestResetToImage() { ResetToSkImage(GetSkImage()); }
+
+private:
+    // This should be called whenever the contents have (possibly) changed.
+    // It may reset some cached data such as the checksum.
+    void DataChanged();
+    // Reset the state to pixel data (resets cached images allocated in GetSkImage()/GetAlphaSkImage()).
+    void ResetToBuffer();
+    // Sets the data only as SkImage (will be converted as needed).
+    void ResetToSkImage(sk_sp<SkImage> image);
+    // Resets all data (buffer and images).
+    void ResetAllData();
+    // Call to ensure mBuffer has data (will convert from mImage if necessary).
+    void EnsureBitmapData();
+    void EnsureBitmapData() const { return const_cast<SkiaSalBitmap*>(this)->EnsureBitmapData(); }
+    // Like EnsureBitmapData(), but will also make any shared data unique.
+    // Call before changing the data.
+    void EnsureBitmapUniqueData();
+    // Allocate mBuffer (with uninitialized contents).
+    void CreateBitmapData();
+    // Should be called whenever mPixelsSize or mBitCount is set/changed.
+    bool ComputeScanlineSize();
+    // Resets information about pending scaling. To be called when mBuffer is resized or created.
+    void ResetPendingScaling();
+    // Sets bitmap to be erased on demand.
+    void EraseInternal(const Color& color);
+    // Sets pixels to the erase color.
+    void PerformErase();
+    // Try to find out if the content is completely black. Used for optimizations,
+    // not guaranteed to always return true for such bitmaps.
+    bool IsAllBlack() const;
+    void ReleaseBuffer(BitmapBuffer* pBuffer, BitmapAccessMode nMode, bool dontChangeToErase);
+    SkBitmap GetAsSkBitmap() const;
+    bool ConserveMemory() const;
+    void verify() const
+#ifdef DBG_UTIL
+        ;
+#else
+    {
+    }
+#endif
+
+    template <typename charT, typename traits>
+    friend std::basic_ostream<charT, traits>& operator<<(std::basic_ostream<charT, traits>& stream,
+                                                         const SkiaSalBitmap* bitmap)
+    {
+        if (bitmap == nullptr)
+            return stream << "(null)";
+        // p - has (non-trivial) palette
+        // I/i - has SkImage (on GPU/CPU),
+        // A/a - has alpha SkImage (on GPU/CPU)
+        // E - has erase color
+        // B - has pixel buffer
+        // (wxh) - has pending scaling (after each item)
+        stream << static_cast<const void*>(bitmap) << " " << bitmap->GetSize() << "x"
+               << bitmap->GetBitCount();
+        if (bitmap->GetBitCount() <= 8 && !bitmap->Palette().IsGreyPalette8Bit())
+            stream << "p";
+        stream << "/";
+        if (bitmap->mImage)
+        {
+            stream << (bitmap->mImage->isTextureBacked() ? "I" : "i");
+            if (SkiaHelper::imageSize(bitmap->mImage) != bitmap->mSize)
+                stream << "(" << SkiaHelper::imageSize(bitmap->mImage) << ")";
+        }
+        if (bitmap->mAlphaImage)
+        {
+            stream << (bitmap->mAlphaImage->isTextureBacked() ? "A" : "a");
+            if (SkiaHelper::imageSize(bitmap->mAlphaImage) != bitmap->mSize)
+                stream << "(" << SkiaHelper::imageSize(bitmap->mAlphaImage) << ")";
+        }
+        if (bitmap->mEraseColorSet)
+            stream << "E" << bitmap->mEraseColor;
+        if (bitmap->mBuffer)
+        {
+            stream << "B";
+            if (bitmap->mSize != bitmap->mPixelsSize)
+                stream << "(" << bitmap->mPixelsSize << ")";
+        }
+        return stream;
+    }
+
+    BitmapPalette mPalette;
+    int mBitCount = 0; // bpp
+    Size mSize;
+    // The contents of the bitmap may be stored in several different ways:
+    // As mBuffer buffer, which normally stores pixels in the given format.
+    // As SkImage, as cached GPU-backed data, but sometimes also a result of some operation.
+    // There is no "master" storage that the other would be derived from. The usual
+    // mode of operation is that mBuffer holds the data, mImage is created
+    // on demand as GPU-backed cached data by calling GetSkImage(), and the cached mImage
+    // is reset by ResetCachedImage(). But sometimes only mImage will be set and in that case
+    // mBuffer must be filled from it on demand if necessary by EnsureBitmapData().
+    boost::shared_ptr<sal_uInt8[]> mBuffer;
+    int mScanlineSize; // size of one row in mBuffer (based on mPixelsSize)
+    sk_sp<SkImage> mImage; // possibly GPU-backed
+    sk_sp<SkImage> mAlphaImage; // cached contents as alpha image, possibly GPU-backed
+    // Actual scaling triggered by scale() is done on-demand. This is the size of the pixel
+    // data in mBuffer, if it differs from mSize, then there is a scaling operation pending.
+    Size mPixelsSize;
+    BmpScaleFlag mScaleQuality = BmpScaleFlag::BestQuality; // quality for on-demand scaling
+    // Erase() is delayed, just sets these two instead of filling the buffer.
+    bool mEraseColorSet = false;
+    Color mEraseColor;
+    int mAnyAccessCount = 0; // number of any kind of AcquireAccess() that have not been released
+#ifdef DBG_UTIL
+    int mWriteAccessCount = 0; // number of write AcquireAccess() that have not been released
+#endif
+};
+
+#endif // INCLUDED_VCL_INC_SKIA_SALBMP_H
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
diff --git a/vcl/inc/skia/utils.hxx b/vcl/inc/skia/utils.hxx
new file mode 100644
index 000000000..355718e8b
--- /dev/null
+++ b/vcl/inc/skia/utils.hxx
@@ -0,0 +1,333 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+#ifndef INCLUDED_VCL_INC_SKIA_UTILS_H
+#define INCLUDED_VCL_INC_SKIA_UTILS_H
+
+#include <vcl/skia/SkiaHelper.hxx>
+
+#include <tools/gen.hxx>
+#include <driverblocklist.hxx>
+#include <vcl/bitmap.hxx>
+#include <vcl/salgtype.hxx>
+
+#include <test/GraphicsRenderTests.hxx>
+
+#include <premac.h>
+#include <SkRegion.h>
+#include <SkSurface.h>
+#include <tools/sk_app/WindowContext.h>
+#include <postmac.h>
+
+#include <string_view>
+
+namespace SkiaHelper
+{
+// Get the one shared GrDirectContext instance.
+GrDirectContext* getSharedGrDirectContext();
+
+void disableRenderMethod(RenderMethod method);
+
+// Create SkSurface, GPU-backed if possible.
+VCL_DLLPUBLIC sk_sp<SkSurface> createSkSurface(int width, int height,
+                                               SkColorType type = kN32_SkColorType,
+                                               SkAlphaType alpha = kPremul_SkAlphaType);
+
+inline sk_sp<SkSurface> createSkSurface(const Size& size, SkColorType type = kN32_SkColorType,
+                                        SkAlphaType alpha = kPremul_SkAlphaType)
+{
+    return createSkSurface(size.Width(), size.Height(), type, alpha);
+}
+
+inline sk_sp<SkSurface> createSkSurface(int width, int height, SkAlphaType alpha)
+{
+    return createSkSurface(width, height, kN32_SkColorType, alpha);
+}
+
+inline sk_sp<SkSurface> createSkSurface(const Size& size, SkAlphaType alpha)
+{
+    return createSkSurface(size.Width(), size.Height(), kN32_SkColorType, alpha);
+}
+
+// Create SkImage, GPU-backed if possible.
+VCL_DLLPUBLIC sk_sp<SkImage> createSkImage(const SkBitmap& bitmap);
+
+// Call surface->makeImageSnapshot() and abort on failure.
+VCL_DLLPUBLIC sk_sp<SkImage> makeCheckedImageSnapshot(sk_sp<SkSurface> surface);
+VCL_DLLPUBLIC sk_sp<SkImage> makeCheckedImageSnapshot(sk_sp<SkSurface> surface,
+                                                      const SkIRect& bounds);
+
+inline Size imageSize(const sk_sp<SkImage>& image) { return Size(image->width(), image->height()); }
+
+inline SkColor toSkColor(Color color)
+{
+    return SkColorSetARGB(color.GetAlpha(), color.GetRed(), color.GetGreen(), color.GetBlue());
+}
+
+inline SkColor toSkColorWithTransparency(Color aColor, double fTransparency)
+{
+    return SkColorSetA(toSkColor(aColor), 255 * (1.0 - fTransparency));
+}
+
+inline SkColor toSkColorWithIntensity(Color color, int intensity)
+{
+    return SkColorSetARGB(color.GetAlpha(), color.GetRed() * intensity / 100,
+                          color.GetGreen() * intensity / 100, color.GetBlue() * intensity / 100);
+}
+
+inline Color fromSkColor(SkColor color)
+{
+    return Color(ColorAlpha, SkColorGetA(color), SkColorGetR(color), SkColorGetG(color),
+                 SkColorGetB(color));
+}
+
+// Whether to use GetSkImage() that checks for delayed scaling or whether to access
+// the stored image directly without checks.
+enum DirectImage
+{
+    Yes,
+    No
+};
+
+// Sets SkBlender that will do an invert operation.
+void setBlenderInvert(SkPaint* paint);
+// Sets SkBlender that will do a xor operation.
+void setBlenderXor(SkPaint* paint);
+
+// Must be called in any VCL backend before any Skia functionality is used.
+// If not set, Skia will be disabled.
+VCL_DLLPUBLIC void
+    prepareSkia(std::unique_ptr<sk_app::WindowContext> (*createGpuWindowContext)(bool));
+
+// Shared cache of images.
+void addCachedImage(const OString& key, sk_sp<SkImage> image);
+sk_sp<SkImage> findCachedImage(const OString& key);
+void removeCachedImage(sk_sp<SkImage> image);
+tools::Long maxImageCacheSize();
+
+// Get checksum of the image content, only for raster images. Is cached,
+// but may still be somewhat expensive.
+uint32_t getSkImageChecksum(sk_sp<SkImage> image);
+
+// SkSurfaceProps to be used by all Skia surfaces.
+VCL_DLLPUBLIC const SkSurfaceProps* surfaceProps();
+// Set pixel geometry to be used by SkSurfaceProps.
+VCL_DLLPUBLIC void setPixelGeometry(SkPixelGeometry pixelGeometry);
+
+inline bool isUnitTestRunning(const char* name = nullptr)
+{
+    if (name == nullptr)
+    {
+        static const char* const testname = getenv("LO_TESTNAME");
+        if (testname != nullptr)
+            return true;
+        return !vcl::test::activeGraphicsRenderTest().isEmpty();
+    }
+    const char* const testname = getenv("LO_TESTNAME");
+    if (testname != nullptr && std::string_view(name) == testname)
+        return true;
+    return vcl::test::activeGraphicsRenderTest().equalsAscii(name);
+}
+
+// Scaling done on the GPU is fast, but bicubic done in raster mode can be slow
+// if done too much, and it generally shouldn't be needed for to-screen drawing.
+// In that case use only BmpScaleFlag::Default, which is bilinear+mipmap,
+// which should be good enough (and that's what the "super" bitmap scaling
+// algorithm done by VCL does as well).
+inline BmpScaleFlag goodScalingQuality(bool isGPU)
+{
+    return isGPU ? BmpScaleFlag::BestQuality : BmpScaleFlag::Default;
+}
+
+// Normal scaling algorithms have a poor quality when downscaling a lot.
+// https://bugs.chromium.org/p/skia/issues/detail?id=11810 suggests to use mipmaps
+// in such a case, which is annoying to do explicitly instead of Skia deciding which
+// algorithm would be the best, but now with Skia removing SkFilterQuality and requiring
+// explicitly being told what algorithm to use this appears to be the best we can do.
+// Anything scaled down at least this ratio will use linear+mipmaps.
+constexpr int downscaleRatioThreshold = 4;
+
+inline SkSamplingOptions makeSamplingOptions(BmpScaleFlag scalingType, SkMatrix matrix,
+                                             int scalingFactor)
+{
+    switch (scalingType)
+    {
+        case BmpScaleFlag::BestQuality:
+            if (scalingFactor != 1)
+                matrix.postScale(scalingFactor, scalingFactor);
+            if (matrix.getScaleX() <= 1.0 / downscaleRatioThreshold
+                || matrix.getScaleY() <= 1.0 / downscaleRatioThreshold)
+                return SkSamplingOptions(SkFilterMode::kLinear, SkMipmapMode::kLinear);
+            return SkSamplingOptions(SkCubicResampler::Mitchell());
+        case BmpScaleFlag::Default:
+            // Use SkMipmapMode::kNearest for better quality when downscaling. SkMipmapMode::kLinear
+            // would be even better, but it is not specially optimized in raster mode.
+            return SkSamplingOptions(SkFilterMode::kLinear, SkMipmapMode::kNearest);
+        case BmpScaleFlag::Fast:
+        case BmpScaleFlag::NearestNeighbor:
+            return SkSamplingOptions(SkFilterMode::kNearest, SkMipmapMode::kNone);
+        default:
+            assert(false);
+            return SkSamplingOptions();
+    }
+}
+
+inline SkSamplingOptions makeSamplingOptions(BmpScaleFlag scalingType, const Size& srcSize,
+                                             Size destSize, int scalingFactor)
+{
+    switch (scalingType)
+    {
+        case BmpScaleFlag::BestQuality:
+            if (scalingFactor != 1)
+                destSize *= scalingFactor;
+            if (srcSize.Width() / destSize.Width() >= downscaleRatioThreshold
+                || srcSize.Height() / destSize.Height() >= downscaleRatioThreshold)
+                return SkSamplingOptions(SkFilterMode::kLinear, SkMipmapMode::kLinear);
+            return SkSamplingOptions(SkCubicResampler::Mitchell());
+        case BmpScaleFlag::Default:
+            // As in the first overload, use kNearest.
+            return SkSamplingOptions(SkFilterMode::kLinear, SkMipmapMode::kNearest);
+        case BmpScaleFlag::Fast:
+        case BmpScaleFlag::NearestNeighbor:
+            return SkSamplingOptions(SkFilterMode::kNearest, SkMipmapMode::kNone);
+        default:
+            assert(false);
+            return SkSamplingOptions();
+    }
+}
+
+inline SkSamplingOptions makeSamplingOptions(const SalTwoRect& rPosAry, int scalingFactor,
+                                             int srcScalingFactor, bool isGPU)
+{
+    // If there will be scaling, make it smooth, but not in unittests, as those often
+    // require exact color values and would be confused by this.
+    if (isUnitTestRunning())
+        return SkSamplingOptions(); // none
+    Size srcSize(rPosAry.mnSrcWidth, rPosAry.mnSrcHeight);
+    Size destSize(rPosAry.mnDestWidth, rPosAry.mnDestHeight);
+    if (scalingFactor != 1)
+        destSize *= scalingFactor;
+    if (srcScalingFactor != 1)
+        srcSize *= srcScalingFactor;
+    if (srcSize != destSize)
+        return makeSamplingOptions(goodScalingQuality(isGPU), srcSize, destSize, 1);
+    return SkSamplingOptions(); // none
+}
+
+inline SkRect scaleRect(const SkRect& rect, int scaling)
+{
+    return SkRect::MakeXYWH(rect.x() * scaling, rect.y() * scaling, rect.width() * scaling,
+                            rect.height() * scaling);
+}
+
+inline SkIRect scaleRect(const SkIRect& rect, int scaling)
+{
+    return SkIRect::MakeXYWH(rect.x() * scaling, rect.y() * scaling, rect.width() * scaling,
+                             rect.height() * scaling);
+}
+
+#ifdef DBG_UTIL
+void prefillSurface(const sk_sp<SkSurface>& surface);
+#endif
+
+VCL_DLLPUBLIC void dump(const SkBitmap& bitmap, const char* file);
+VCL_DLLPUBLIC void dump(const sk_sp<SkImage>& image, const char* file);
+VCL_DLLPUBLIC void dump(const sk_sp<SkSurface>& surface, const char* file);
+
+VCL_DLLPUBLIC extern uint32_t vendorId;
+
+inline DriverBlocklist::DeviceVendor getVendor()
+{
+    return DriverBlocklist::GetVendorFromId(vendorId);
+}
+
+} // namespace SkiaHelper
+
+// For unittests.
+namespace SkiaTests
+{
+VCL_DLLPUBLIC bool matrixNeedsHighQuality(const SkMatrix& matrix);
+}
+
+template <typename charT, typename traits>
+inline std::basic_ostream<charT, traits>& operator<<(std::basic_ostream<charT, traits>& stream,
+                                                     const SkRect& rectangle)
+{
+    if (rectangle.isEmpty())
+        return stream << "EMPTY";
+    else
+        return stream << rectangle.width() << 'x' << rectangle.height() << "@(" << rectangle.x()
+                      << ',' << rectangle.y() << ")";
+}
+
+template <typename charT, typename traits>
+inline std::basic_ostream<charT, traits>& operator<<(std::basic_ostream<charT, traits>& stream,
+                                                     const SkIRect& rectangle)
+{
+    if (rectangle.isEmpty())
+        return stream << "EMPTY";
+    else
+        return stream << rectangle.width() << 'x' << rectangle.height() << "@(" << rectangle.x()
+                      << ',' << rectangle.y() << ")";
+}
+
+template <typename charT, typename traits>
+inline std::basic_ostream<charT, traits>& operator<<(std::basic_ostream<charT, traits>& stream,
+                                                     const SkRegion& region)
+{
+    if (region.isEmpty())
+        return stream << "EMPTY";
+    stream << "(";
+    SkRegion::Iterator it(region);
+    for (int i = 0; !it.done(); it.next(), ++i)
+        stream << "[" << i << "] " << it.rect();
+    stream << ")";
+    return stream;
+}
+
+template <typename charT, typename traits>
+inline std::basic_ostream<charT, traits>& operator<<(std::basic_ostream<charT, traits>& stream,
+                                                     const SkMatrix& matrix)
+{
+    return stream << "[" << matrix[0] << " " << matrix[1] << " " << matrix[2] << "]"
+                  << "[" << matrix[3] << " " << matrix[4] << " " << matrix[5] << "]"
+                  << "[" << matrix[6] << " " << matrix[7] << " " << matrix[8] << "]";
+}
+
+template <typename charT, typename traits>
+inline std::basic_ostream<charT, traits>& operator<<(std::basic_ostream<charT, traits>& stream,
+                                                     const SkImage& image)
+{
+    // G - on GPU
+    return stream << static_cast<const void*>(&image) << " " << Size(image.width(), image.height())
+                  << "/" << (SkColorTypeBytesPerPixel(image.imageInfo().colorType()) * 8)
+                  << (image.isTextureBacked() ? "G" : "");
+}
+template <typename charT, typename traits>
+inline std::basic_ostream<charT, traits>& operator<<(std::basic_ostream<charT, traits>& stream,
+                                                     const sk_sp<SkImage>& image)
+{
+    if (image == nullptr)
+        return stream << "(null)";
+    return stream << *image;
+}
+
+#endif // INCLUDED_VCL_INC_SKIA_UTILS_H
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
diff --git a/vcl/inc/skia/win/font.hxx b/vcl/inc/skia/win/font.hxx
new file mode 100644
index 000000000..b63c5cba4
--- /dev/null
+++ b/vcl/inc/skia/win/font.hxx
@@ -0,0 +1,40 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ */
+
+#pragma once
+
+#include <sal/config.h>
+
+#include <win/winlayout.hxx>
+
+#include <SkTypeface.h>
+
+// This class only adds SkTypeface in order to allow its caching.
+class SkiaWinFontInstance : public WinFontInstance
+{
+    friend rtl::Reference<LogicalFontInstance>
+    WinFontFace::CreateFontInstance(const vcl::font::FontSelectPattern&) const;
+
+public:
+    sk_sp<SkTypeface> GetSkiaTypeface() const { return m_skiaTypeface; }
+    bool GetSkiaDWrite() const { return m_skiaDWrite; }
+    void SetSkiaTypeface(const sk_sp<SkTypeface>& typeface, bool dwrite)
+    {
+        m_skiaTypeface = typeface;
+        m_skiaDWrite = dwrite;
+    }
+
+private:
+    using WinFontInstance::WinFontInstance;
+    sk_sp<SkTypeface> m_skiaTypeface;
+    bool m_skiaDWrite;
+};
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
diff --git a/vcl/inc/skia/win/gdiimpl.hxx b/vcl/inc/skia/win/gdiimpl.hxx
new file mode 100644
index 000000000..1977e7152
--- /dev/null
+++ b/vcl/inc/skia/win/gdiimpl.hxx
@@ -0,0 +1,93 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ */
+
+#ifndef INCLUDED_VCL_INC_SKIA_WIN_GDIIMPL_HXX
+#define INCLUDED_VCL_INC_SKIA_WIN_GDIIMPL_HXX
+
+#include <memory>
+#include <systools/win32/comtools.hxx>
+
+#include <vcl/dllapi.h>
+#include <skia/gdiimpl.hxx>
+#include <skia/utils.hxx>
+#include <win/salgdi.h>
+#include <win/wingdiimpl.hxx>
+#include <o3tl/lru_map.hxx>
+#include <ControlCacheKey.hxx>
+#include <svdata.hxx>
+
+#include <SkFont.h>
+#include <SkFontMgr.h>
+
+#include <dwrite_3.h>
+
+class SkTypeface;
+class ControlCacheKey;
+
+class SkiaCompatibleDC : public CompatibleDC
+{
+public:
+    SkiaCompatibleDC(SalGraphics& rGraphics, int x, int y, int width, int height);
+
+    sk_sp<SkImage> getAsImageDiff(const SkiaCompatibleDC& white) const;
+};
+
+class WinSkiaSalGraphicsImpl : public SkiaSalGraphicsImpl, public WinSalGraphicsImplBase
+{
+private:
+    WinSalGraphics& mWinParent;
+
+public:
+    WinSkiaSalGraphicsImpl(WinSalGraphics& rGraphics, SalGeometryProvider* mpProvider);
+
+    virtual bool UseRenderNativeControl() const override { return true; }
+    virtual bool TryRenderCachedNativeControl(ControlCacheKey const& rControlCacheKey, int nX,
+                                              int nY) override;
+    virtual bool RenderAndCacheNativeControl(CompatibleDC& rWhite, CompatibleDC& rBlack, int nX,
+                                             int nY, ControlCacheKey& aControlCacheKey) override;
+
+    virtual bool DrawTextLayout(const GenericSalLayout& layout) override;
+    virtual void ClearDevFontCache() override;
+    virtual void ClearNativeControlCache() override;
+
+    virtual void freeResources() override;
+    virtual void Flush() override;
+
+    static void prepareSkia();
+
+protected:
+    virtual void createWindowSurfaceInternal(bool forceRaster = false) override;
+    static sk_sp<SkTypeface> createDirectWriteTypeface(HDC hdc, HFONT hfont);
+    static void initFontInfo();
+    inline static sal::systools::COMReference<IDWriteFactory> dwriteFactory;
+    inline static sal::systools::COMReference<IDWriteGdiInterop> dwriteGdiInterop;
+    inline static sal::systools::COMReference<IDWriteFontSetBuilder> dwriteFontSetBuilder;
+    inline static sal::systools::COMReference<IDWriteFontCollection1> dwritePrivateCollection;
+    inline static sk_sp<SkFontMgr> dwriteFontMgr;
+    inline static bool dwriteDone = false;
+    static SkFont::Edging fontEdging;
+};
+
+typedef std::pair<ControlCacheKey, sk_sp<SkImage>> SkiaControlCachePair;
+typedef o3tl::lru_map<ControlCacheKey, sk_sp<SkImage>, ControlCacheHashFunction>
+    SkiaControlCacheType;
+
+class SkiaControlsCache
+{
+    SkiaControlCacheType cache;
+
+    SkiaControlsCache();
+
+public:
+    static SkiaControlCacheType& get();
+};
+
+#endif
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
diff --git a/vcl/inc/skia/x11/gdiimpl.hxx b/vcl/inc/skia/x11/gdiimpl.hxx
new file mode 100644
index 000000000..f7198671b
--- /dev/null
+++ b/vcl/inc/skia/x11/gdiimpl.hxx
@@ -0,0 +1,45 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ */
+
+#ifndef INCLUDED_VCL_INC_SKIA_X11_GDIIMPL_HXX
+#define INCLUDED_VCL_INC_SKIA_X11_GDIIMPL_HXX
+
+#include <vcl/dllapi.h>
+
+#include <skia/gdiimpl.hxx>
+#include <unx/salgdi.h>
+#include <unx/x11/x11gdiimpl.h>
+
+class VCL_PLUGIN_PUBLIC X11SkiaSalGraphicsImpl final : public SkiaSalGraphicsImpl,
+                                                       public X11GraphicsImpl
+{
+private:
+    X11SalGraphics& mX11Parent;
+
+public:
+    X11SkiaSalGraphicsImpl(X11SalGraphics& rParent);
+
+    virtual void Init() override;
+    virtual void freeResources() override;
+    virtual void Flush() override;
+
+    static void prepareSkia();
+
+private:
+    virtual void createWindowSurfaceInternal(bool forceRaster = false) override;
+    virtual bool avoidRecreateByResize() const override;
+    static std::unique_ptr<sk_app::WindowContext>
+    createWindowContext(Display* display, Drawable drawable, const XVisualInfo* visual, int width,
+                        int height, SkiaHelper::RenderMethod renderMethod, bool temporary);
+    friend std::unique_ptr<sk_app::WindowContext> createVulkanWindowContext(bool);
+};
+
+#endif // INCLUDED_VCL_INC_SKIA_X11_GDIIMPL_HXX
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
diff --git a/vcl/inc/skia/x11/salvd.hxx b/vcl/inc/skia/x11/salvd.hxx
new file mode 100644
index 000000000..fec4b8080
--- /dev/null
+++ b/vcl/inc/skia/x11/salvd.hxx
@@ -0,0 +1,46 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ */
+
+#ifndef INCLUDED_VCL_INC_SKIA_X11_SALVD_H
+#define INCLUDED_VCL_INC_SKIA_X11_SALVD_H
+
+#include <salvd.hxx>
+
+class X11SkiaSalVirtualDevice final : public SalVirtualDevice
+{
+    SalDisplay* mpDisplay;
+    std::unique_ptr<X11SalGraphics> mpGraphics;
+    bool mbGraphics; // is Graphics used
+    SalX11Screen mnXScreen;
+    int mnWidth;
+    int mnHeight;
+
+public:
+    X11SkiaSalVirtualDevice(const SalGraphics& rGraphics, tools::Long nDX, tools::Long nDY,
+                            const SystemGraphicsData* pData,
+                            std::unique_ptr<X11SalGraphics> pNewGraphics);
+    virtual ~X11SkiaSalVirtualDevice() override;
+
+    // SalGeometryProvider
+    virtual tools::Long GetWidth() const override { return mnWidth; }
+    virtual tools::Long GetHeight() const override { return mnHeight; }
+
+    SalDisplay* GetDisplay() const { return mpDisplay; }
+    const SalX11Screen& GetXScreenNumber() const { return mnXScreen; }
+
+    virtual SalGraphics* AcquireGraphics() override;
+    virtual void ReleaseGraphics(SalGraphics* pGraphics) override;
+
+    // Set new size, without saving the old contents
+    virtual bool SetSize(tools::Long nNewDX, tools::Long nNewDY) override;
+};
+
+#endif // INCLUDED_VCL_INC_SKIA_X11_SALVD_H
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
diff --git a/vcl/inc/skia/x11/textrender.hxx b/vcl/inc/skia/x11/textrender.hxx
new file mode 100644
index 000000000..6943ab4ce
--- /dev/null
+++ b/vcl/inc/skia/x11/textrender.hxx
@@ -0,0 +1,40 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+#ifndef INCLUDED_VCL_INC_SKIA_TEXTRENDER_HXX
+#define INCLUDED_VCL_INC_SKIA_TEXTRENDER_HXX
+
+#include <unx/freetypetextrender.hxx>
+
+#include <SkFontMgr.h>
+#include <SkFontMgr_fontconfig.h>
+
+class VCL_DLLPUBLIC SkiaTextRender final : public FreeTypeTextRenderImpl
+{
+public:
+    virtual void DrawTextLayout(const GenericSalLayout&, const SalGraphics&) override;
+    virtual void ClearDevFontCache() override;
+
+private:
+    static inline sk_sp<SkFontMgr> fontManager;
+};
+
+#endif
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
diff --git a/vcl/inc/skia/zone.hxx b/vcl/inc/skia/zone.hxx
new file mode 100644
index 000000000..6d503e7eb
--- /dev/null
+++ b/vcl/inc/skia/zone.hxx
@@ -0,0 +1,33 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ */
+
+#ifndef INCLUDED_VCL_INC_SKIA_ZONE_H
+#define INCLUDED_VCL_INC_SKIA_ZONE_H
+
+#include <comphelper/crashzone.hxx>
+
+#include <vcl/dllapi.h>
+
+#include <comphelper/solarmutex.hxx>
+
+// Used around calls to Skia code to detect crashes in drivers.
+class VCL_DLLPUBLIC SkiaZone : public CrashZone<SkiaZone>
+{
+public:
+    SkiaZone() { assert(comphelper::SolarMutex::get()->IsCurrentThread()); }
+    static void hardDisable();
+    static void relaxWatchdogTimings();
+    static const CrashWatchdogTimingsValues& getCrashWatchdogTimingsValues();
+    static void checkDebug(int nUnchanged, const CrashWatchdogTimingsValues& aTimingValues);
+    static const char* name() { return "Skia"; }
+};
+
+#endif // INCLUDED_VCL_INC_SKIA_ZONE_H
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */