diff options
Diffstat (limited to 'chart2/source/controller/dialogs/ChartResourceGroupDlgs.cxx')
| -rw-r--r-- | chart2/source/controller/dialogs/ChartResourceGroupDlgs.cxx | 131 |
1 files changed, 131 insertions, 0 deletions
diff --git a/chart2/source/controller/dialogs/ChartResourceGroupDlgs.cxx b/chart2/source/controller/dialogs/ChartResourceGroupDlgs.cxx new file mode 100644 index 000000000..91307afaa --- /dev/null +++ b/chart2/source/controller/dialogs/ChartResourceGroupDlgs.cxx @@ -0,0 +1,131 @@ +/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ +/* + * This file is part of the LibreOffice project. + * + * This Source Code Form is subject to the terms of the Mozilla Public + * License, v. 2.0. If a copy of the MPL was not distributed with this + * file, You can obtain one at http://mozilla.org/MPL/2.0/. + * + * This file incorporates work covered by the following license notice: + * + * Licensed to the Apache Software Foundation (ASF) under one or more + * contributor license agreements. See the NOTICE file distributed + * with this work for additional information regarding copyright + * ownership. The ASF licenses this file to you under the Apache + * License, Version 2.0 (the "License"); you may not use this file + * except in compliance with the License. You may obtain a copy of + * the License at http://www.apache.org/licenses/LICENSE-2.0 . + */ + +#include <ChartResourceGroupDlgs.hxx> +#include <ChartTypeDialogController.hxx> + +#include <strings.hrc> +#include <ResId.hxx> + +namespace chart +{ +using namespace ::com::sun::star; +using namespace ::com::sun::star::chart2; + +const sal_uInt16 CUBIC_SPLINE_POS = 0; +const sal_uInt16 B_SPLINE_POS = 1; + +SplinePropertiesDialog::SplinePropertiesDialog(weld::Window* pParent) + : GenericDialogController(pParent, "modules/schart/ui/smoothlinesdlg.ui", "SmoothLinesDialog") + , m_xLB_Spline_Type(m_xBuilder->weld_combo_box("SplineTypeComboBox")) + , m_xMF_SplineResolution(m_xBuilder->weld_spin_button("ResolutionSpinbutton")) + , m_xFT_SplineOrder(m_xBuilder->weld_label("PolynomialsLabel")) + , m_xMF_SplineOrder(m_xBuilder->weld_spin_button("PolynomialsSpinButton")) +{ + m_xDialog->set_title(SchResId(STR_DLG_SMOOTH_LINE_PROPERTIES)); + + m_xLB_Spline_Type->connect_changed(LINK(this, SplinePropertiesDialog, SplineTypeListBoxHdl)); +} + +void SplinePropertiesDialog::fillControls(const ChartTypeParameter& rParameter) +{ + switch (rParameter.eCurveStyle) + { + case CurveStyle_CUBIC_SPLINES: + m_xLB_Spline_Type->set_active(CUBIC_SPLINE_POS); + break; + case CurveStyle_B_SPLINES: + m_xLB_Spline_Type->set_active(B_SPLINE_POS); + break; + default: + m_xLB_Spline_Type->set_active(CUBIC_SPLINE_POS); + break; + } + m_xMF_SplineOrder->set_value(rParameter.nSplineOrder); + m_xMF_SplineResolution->set_value(rParameter.nCurveResolution); + + //dis/enabling + m_xFT_SplineOrder->set_sensitive(m_xLB_Spline_Type->get_active() == B_SPLINE_POS); + m_xMF_SplineOrder->set_sensitive(m_xLB_Spline_Type->get_active() == B_SPLINE_POS); +} + +void SplinePropertiesDialog::fillParameter(ChartTypeParameter& rParameter, bool bSmoothLines) +{ + if (!bSmoothLines) + rParameter.eCurveStyle = CurveStyle_LINES; + else if (m_xLB_Spline_Type->get_active() == CUBIC_SPLINE_POS) + rParameter.eCurveStyle = CurveStyle_CUBIC_SPLINES; + else if (m_xLB_Spline_Type->get_active() == B_SPLINE_POS) + rParameter.eCurveStyle = CurveStyle_B_SPLINES; + + rParameter.nCurveResolution = m_xMF_SplineResolution->get_value(); + rParameter.nSplineOrder = m_xMF_SplineOrder->get_value(); +} + +IMPL_LINK_NOARG(SplinePropertiesDialog, SplineTypeListBoxHdl, weld::ComboBox&, void) +{ + m_xFT_SplineOrder->set_sensitive(m_xLB_Spline_Type->get_active() == B_SPLINE_POS); + m_xMF_SplineOrder->set_sensitive(m_xLB_Spline_Type->get_active() == B_SPLINE_POS); +} + +SteppedPropertiesDialog::SteppedPropertiesDialog(weld::Window* pParent) + : GenericDialogController(pParent, "modules/schart/ui/steppedlinesdlg.ui", "SteppedLinesDialog") + , m_xRB_Start(m_xBuilder->weld_radio_button("step_start_rb")) + , m_xRB_End(m_xBuilder->weld_radio_button("step_end_rb")) + , m_xRB_CenterX(m_xBuilder->weld_radio_button("step_center_x_rb")) + , m_xRB_CenterY(m_xBuilder->weld_radio_button("step_center_y_rb")) +{ + m_xDialog->set_title(SchResId(STR_DLG_STEPPED_LINE_PROPERTIES)); +} + +void SteppedPropertiesDialog::fillControls(const ChartTypeParameter& rParameter) +{ + switch (rParameter.eCurveStyle) + { + case CurveStyle_STEP_END: + m_xRB_End->set_active(true); + break; + case CurveStyle_STEP_CENTER_X: + m_xRB_CenterX->set_active(true); + break; + case CurveStyle_STEP_CENTER_Y: + m_xRB_CenterY->set_active(true); + break; + default: // includes CurveStyle_STEP_START + m_xRB_Start->set_active(true); + break; + } +} +void SteppedPropertiesDialog::fillParameter(ChartTypeParameter& rParameter, bool bSteppedLines) +{ + if (!bSteppedLines) + rParameter.eCurveStyle = CurveStyle_LINES; + else if (m_xRB_CenterY->get_active()) + rParameter.eCurveStyle = CurveStyle_STEP_CENTER_Y; + else if (m_xRB_Start->get_active()) + rParameter.eCurveStyle = CurveStyle_STEP_START; + else if (m_xRB_End->get_active()) + rParameter.eCurveStyle = CurveStyle_STEP_END; + else if (m_xRB_CenterX->get_active()) + rParameter.eCurveStyle = CurveStyle_STEP_CENTER_X; +} + +} //namespace chart + +/* vim:set shiftwidth=4 softtabstop=4 expandtab: */ |