diff options
Diffstat (limited to 'chart2/source/controller/dialogs/tp_3D_SceneGeometry.cxx')
| -rw-r--r-- | chart2/source/controller/dialogs/tp_3D_SceneGeometry.cxx | 256 |
1 files changed, 256 insertions, 0 deletions
diff --git a/chart2/source/controller/dialogs/tp_3D_SceneGeometry.cxx b/chart2/source/controller/dialogs/tp_3D_SceneGeometry.cxx new file mode 100644 index 000000000..df1d8e907 --- /dev/null +++ b/chart2/source/controller/dialogs/tp_3D_SceneGeometry.cxx @@ -0,0 +1,256 @@ +/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ +/* + * This file is part of the LibreOffice project. + * + * This Source Code Form is subject to the terms of the Mozilla Public + * License, v. 2.0. If a copy of the MPL was not distributed with this + * file, You can obtain one at http://mozilla.org/MPL/2.0/. + * + * This file incorporates work covered by the following license notice: + * + * Licensed to the Apache Software Foundation (ASF) under one or more + * contributor license agreements. See the NOTICE file distributed + * with this work for additional information regarding copyright + * ownership. The ASF licenses this file to you under the Apache + * License, Version 2.0 (the "License"); you may not use this file + * except in compliance with the License. You may obtain a copy of + * the License at http://www.apache.org/licenses/LICENSE-2.0 . + */ + +#include "tp_3D_SceneGeometry.hxx" + +#include <Diagram.hxx> +#include <DiagramHelper.hxx> +#include <ChartType.hxx> +#include <ChartTypeHelper.hxx> +#include <ThreeDHelper.hxx> +#include <ControllerLockGuard.hxx> +#include <com/sun/star/drawing/ProjectionMode.hpp> +#include <tools/diagnose_ex.h> +#include <tools/helpers.hxx> +#include <vcl/svapp.hxx> + +namespace chart +{ + +using namespace ::com::sun::star; + +namespace +{ + +void lcl_SetMetricFieldLimits(weld::MetricSpinButton& rField, sal_Int64 nLimit) +{ + rField.set_range(-1*nLimit, nLimit, FieldUnit::DEGREE); +} + +} + +ThreeD_SceneGeometry_TabPage::ThreeD_SceneGeometry_TabPage(weld::Container* pParent, + const rtl::Reference< ::chart::Diagram > & xDiagram, + ControllerLockHelper & rControllerLockHelper) + : m_xDiagram( xDiagram ) + , m_aAngleTimer("chart2 ThreeD_SceneGeometry_TabPage m_aAngleTimer") + , m_aPerspectiveTimer("chart2 ThreeD_SceneGeometry_TabPage m_aPerspectiveTimer") + , m_nXRotation(0) + , m_nYRotation(0) + , m_nZRotation(0) + , m_bAngleChangePending( false ) + , m_bPerspectiveChangePending( false ) + , m_rControllerLockHelper( rControllerLockHelper ) + , m_xBuilder(Application::CreateBuilder(pParent, "modules/schart/ui/tp_3D_SceneGeometry.ui")) + , m_xContainer(m_xBuilder->weld_container("tp_3DSceneGeometry")) + , m_xCbxRightAngledAxes(m_xBuilder->weld_check_button("CBX_RIGHT_ANGLED_AXES")) + , m_xMFXRotation(m_xBuilder->weld_metric_spin_button("MTR_FLD_X_ROTATION", FieldUnit::DEGREE)) + , m_xMFYRotation(m_xBuilder->weld_metric_spin_button("MTR_FLD_Y_ROTATION", FieldUnit::DEGREE)) + , m_xFtZRotation(m_xBuilder->weld_label("FT_Z_ROTATION")) + , m_xMFZRotation(m_xBuilder->weld_metric_spin_button("MTR_FLD_Z_ROTATION", FieldUnit::DEGREE)) + , m_xCbxPerspective(m_xBuilder->weld_check_button("CBX_PERSPECTIVE")) + , m_xMFPerspective(m_xBuilder->weld_metric_spin_button("MTR_FLD_PERSPECTIVE", FieldUnit::PERCENT)) +{ + double fXAngle, fYAngle, fZAngle; + ThreeDHelper::getRotationAngleFromDiagram( m_xDiagram, fXAngle, fYAngle, fZAngle ); + + fXAngle = basegfx::rad2deg(fXAngle); + fYAngle = basegfx::rad2deg(fYAngle); + fZAngle = basegfx::rad2deg(fZAngle); + + OSL_ENSURE( fZAngle>=-90 && fZAngle<=90, "z angle is out of valid range" ); + + lcl_SetMetricFieldLimits( *m_xMFZRotation, 90 ); + + m_nXRotation = NormAngle180( + ::basegfx::fround(fXAngle * pow(10.0, m_xMFXRotation->get_digits()))); + m_nYRotation = NormAngle180( + ::basegfx::fround(-1.0 * fYAngle * pow(10.0, m_xMFYRotation->get_digits()))); + m_nZRotation = NormAngle180( + ::basegfx::fround(-1.0 * fZAngle * pow(10.0, m_xMFZRotation->get_digits()))); + + m_xMFXRotation->set_value(m_nXRotation, FieldUnit::DEGREE); + m_xMFYRotation->set_value(m_nYRotation, FieldUnit::DEGREE); + m_xMFZRotation->set_value(m_nZRotation, FieldUnit::DEGREE); + + const int nTimeout = 4*EDIT_UPDATEDATA_TIMEOUT; + m_aAngleTimer.SetTimeout(nTimeout); + m_aAngleTimer.SetInvokeHandler( LINK( this, ThreeD_SceneGeometry_TabPage, AngleChanged ) ); + + Link<weld::MetricSpinButton&,void> aAngleEditedLink( LINK( this, ThreeD_SceneGeometry_TabPage, AngleEdited )); + m_xMFXRotation->connect_value_changed( aAngleEditedLink ); + m_xMFYRotation->connect_value_changed( aAngleEditedLink ); + m_xMFZRotation->connect_value_changed( aAngleEditedLink ); + + drawing::ProjectionMode aProjectionMode = drawing::ProjectionMode_PERSPECTIVE; + m_xDiagram->getPropertyValue( "D3DScenePerspective" ) >>= aProjectionMode; + m_xCbxPerspective->set_active( aProjectionMode == drawing::ProjectionMode_PERSPECTIVE ); + m_xCbxPerspective->connect_toggled( LINK( this, ThreeD_SceneGeometry_TabPage, PerspectiveToggled )); + + sal_Int32 nPerspectivePercentage = 20; + m_xDiagram->getPropertyValue( "Perspective" ) >>= nPerspectivePercentage; + m_xMFPerspective->set_value(nPerspectivePercentage, FieldUnit::PERCENT); + + m_aPerspectiveTimer.SetTimeout(nTimeout); + m_aPerspectiveTimer.SetInvokeHandler( LINK( this, ThreeD_SceneGeometry_TabPage, PerspectiveChanged ) ); + m_xMFPerspective->connect_value_changed( LINK( this, ThreeD_SceneGeometry_TabPage, PerspectiveEdited ) ); + m_xMFPerspective->set_sensitive( m_xCbxPerspective->get_active() ); + + //RightAngledAxes + if (ChartTypeHelper::isSupportingRightAngledAxes(DiagramHelper::getChartTypeByIndex(m_xDiagram, 0))) + { + bool bRightAngledAxes = false; + m_xDiagram->getPropertyValue( "RightAngledAxes" ) >>= bRightAngledAxes; + m_xCbxRightAngledAxes->connect_toggled( LINK( this, ThreeD_SceneGeometry_TabPage, RightAngledAxesToggled )); + m_xCbxRightAngledAxes->set_active( bRightAngledAxes ); + RightAngledAxesToggled(*m_xCbxRightAngledAxes); + } + else + { + m_xCbxRightAngledAxes->set_sensitive(false); + } +} + +ThreeD_SceneGeometry_TabPage::~ThreeD_SceneGeometry_TabPage() +{ +} + +void ThreeD_SceneGeometry_TabPage::commitPendingChanges() +{ + ControllerLockHelperGuard aGuard( m_rControllerLockHelper ); + + if( m_bAngleChangePending ) + applyAnglesToModel(); + if( m_bPerspectiveChangePending ) + applyPerspectiveToModel(); +} + +void ThreeD_SceneGeometry_TabPage::applyAnglesToModel() +{ + ControllerLockHelperGuard aGuard( m_rControllerLockHelper ); + + double fXAngle = 0.0, fYAngle = 0.0, fZAngle = 0.0; + + if (m_xMFZRotation->get_sensitive()) + m_nZRotation = m_xMFZRotation->get_value(FieldUnit::DEGREE); + + fXAngle = double(m_nXRotation)/pow(10.0,m_xMFXRotation->get_digits()); + fYAngle = double(-1.0*m_nYRotation)/pow(10.0,m_xMFYRotation->get_digits()); + fZAngle = double(-1.0*m_nZRotation)/pow(10.0,m_xMFZRotation->get_digits()); + + fXAngle = basegfx::deg2rad(fXAngle); + fYAngle = basegfx::deg2rad(fYAngle); + fZAngle = basegfx::deg2rad(fZAngle); + + ThreeDHelper::setRotationAngleToDiagram( m_xDiagram, fXAngle, fYAngle, fZAngle ); + + m_bAngleChangePending = false; + m_aAngleTimer.Stop(); +} + +IMPL_LINK_NOARG(ThreeD_SceneGeometry_TabPage, AngleEdited, weld::MetricSpinButton&, void) +{ + m_nXRotation = m_xMFXRotation->get_value(FieldUnit::DEGREE); + m_nYRotation = m_xMFYRotation->get_value(FieldUnit::DEGREE); + + m_bAngleChangePending = true; + + m_aAngleTimer.Start(); +} + +IMPL_LINK_NOARG(ThreeD_SceneGeometry_TabPage, AngleChanged, Timer *, void) +{ + applyAnglesToModel(); +} + +void ThreeD_SceneGeometry_TabPage::applyPerspectiveToModel() +{ + ControllerLockHelperGuard aGuard( m_rControllerLockHelper ); + + drawing::ProjectionMode aMode = m_xCbxPerspective->get_active() + ? drawing::ProjectionMode_PERSPECTIVE + : drawing::ProjectionMode_PARALLEL; + + try + { + m_xDiagram->setPropertyValue( "D3DScenePerspective" , uno::Any( aMode )); + m_xDiagram->setPropertyValue( "Perspective" , uno::Any( static_cast<sal_Int32>(m_xMFPerspective->get_value(FieldUnit::PERCENT)) )); + } + catch( const uno::Exception & ) + { + DBG_UNHANDLED_EXCEPTION("chart2"); + } + + m_bPerspectiveChangePending = false; + m_aPerspectiveTimer.Stop(); +} + +IMPL_LINK_NOARG(ThreeD_SceneGeometry_TabPage, PerspectiveEdited, weld::MetricSpinButton&, void) +{ + m_bPerspectiveChangePending = true; + m_aPerspectiveTimer.Start(); +} + +IMPL_LINK_NOARG(ThreeD_SceneGeometry_TabPage, PerspectiveChanged, Timer *, void) +{ + applyPerspectiveToModel(); +} + +IMPL_LINK_NOARG(ThreeD_SceneGeometry_TabPage, PerspectiveToggled, weld::Toggleable&, void) +{ + m_xMFPerspective->set_sensitive(m_xCbxPerspective->get_active()); + applyPerspectiveToModel(); +} + +IMPL_LINK_NOARG(ThreeD_SceneGeometry_TabPage, RightAngledAxesToggled, weld::Toggleable&, void) +{ + ControllerLockHelperGuard aGuard( m_rControllerLockHelper ); + + bool bEnableZ = !m_xCbxRightAngledAxes->get_active(); + m_xFtZRotation->set_sensitive( bEnableZ ); + m_xMFZRotation->set_sensitive( bEnableZ ); + if (!bEnableZ) + { + m_nXRotation = m_xMFXRotation->get_value(FieldUnit::DEGREE); + m_nYRotation = m_xMFYRotation->get_value(FieldUnit::DEGREE); + m_nZRotation = m_xMFZRotation->get_value(FieldUnit::DEGREE); + + m_xMFXRotation->set_value(static_cast<sal_Int64>(ThreeDHelper::getValueClippedToRange(static_cast<double>(m_nXRotation), ThreeDHelper::getXDegreeAngleLimitForRightAngledAxes())), FieldUnit::DEGREE); + m_xMFYRotation->set_value(static_cast<sal_Int64>(ThreeDHelper::getValueClippedToRange(static_cast<double>(m_nYRotation), ThreeDHelper::getYDegreeAngleLimitForRightAngledAxes())), FieldUnit::DEGREE); + m_xMFZRotation->set_text(""); + + lcl_SetMetricFieldLimits( *m_xMFXRotation, static_cast<sal_Int64>(ThreeDHelper::getXDegreeAngleLimitForRightAngledAxes())); + lcl_SetMetricFieldLimits( *m_xMFYRotation, static_cast<sal_Int64>(ThreeDHelper::getYDegreeAngleLimitForRightAngledAxes())); + } + else + { + lcl_SetMetricFieldLimits( *m_xMFXRotation, 180 ); + lcl_SetMetricFieldLimits( *m_xMFYRotation, 180 ); + + m_xMFXRotation->set_value(m_nXRotation, FieldUnit::DEGREE); + m_xMFYRotation->set_value(m_nYRotation, FieldUnit::DEGREE); + m_xMFZRotation->set_value(m_nZRotation, FieldUnit::DEGREE); + } + + ThreeDHelper::switchRightAngledAxes( m_xDiagram, m_xCbxRightAngledAxes->get_active() ); +} + +} //namespace chart + +/* vim:set shiftwidth=4 softtabstop=4 expandtab: */ |