diff options
Diffstat (limited to 'chart2/source/controller/dialogs/tp_SeriesToAxis.cxx')
| -rw-r--r-- | chart2/source/controller/dialogs/tp_SeriesToAxis.cxx | 248 |
1 files changed, 248 insertions, 0 deletions
diff --git a/chart2/source/controller/dialogs/tp_SeriesToAxis.cxx b/chart2/source/controller/dialogs/tp_SeriesToAxis.cxx new file mode 100644 index 000000000..3ffbc3642 --- /dev/null +++ b/chart2/source/controller/dialogs/tp_SeriesToAxis.cxx @@ -0,0 +1,248 @@ +/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ +/* + * This file is part of the LibreOffice project. + * + * This Source Code Form is subject to the terms of the Mozilla Public + * License, v. 2.0. If a copy of the MPL was not distributed with this + * file, You can obtain one at http://mozilla.org/MPL/2.0/. + * + * This file incorporates work covered by the following license notice: + * + * Licensed to the Apache Software Foundation (ASF) under one or more + * contributor license agreements. See the NOTICE file distributed + * with this work for additional information regarding copyright + * ownership. The ASF licenses this file to you under the Apache + * License, Version 2.0 (the "License"); you may not use this file + * except in compliance with the License. You may obtain a copy of + * the License at http://www.apache.org/licenses/LICENSE-2.0 . + */ + +#include "tp_SeriesToAxis.hxx" + +#include <chartview/ChartSfxItemIds.hxx> + +#include <svl/eitem.hxx> +#include <svl/intitem.hxx> +#include <svl/ilstitem.hxx> + +#include <com/sun/star/chart/MissingValueTreatment.hpp> + +namespace chart +{ + +SchOptionTabPage::SchOptionTabPage(weld::Container* pPage, weld::DialogController* pController, const SfxItemSet& rInAttrs) + : SfxTabPage(pPage, pController, "modules/schart/ui/tp_SeriesToAxis.ui", "TP_OPTIONS", &rInAttrs) + , m_nAllSeriesAxisIndex(0) + , m_bProvidesSecondaryYAxis(true) + , m_bProvidesOverlapAndGapWidth(false) + , m_bProvidesBarConnectors(false) + , m_xGrpAxis(m_xBuilder->weld_widget("frameGrpAxis")) + , m_xRbtAxis1(m_xBuilder->weld_radio_button("RBT_OPT_AXIS_1")) + , m_xRbtAxis2(m_xBuilder->weld_radio_button("RBT_OPT_AXIS_2")) + , m_xGrpBar(m_xBuilder->weld_widget("frameSettings")) + , m_xMTGap(m_xBuilder->weld_metric_spin_button("MT_GAP", FieldUnit::PERCENT)) + , m_xMTOverlap(m_xBuilder->weld_metric_spin_button("MT_OVERLAP", FieldUnit::PERCENT)) + , m_xCBConnect(m_xBuilder->weld_check_button("CB_CONNECTOR")) + , m_xCBAxisSideBySide(m_xBuilder->weld_check_button("CB_BARS_SIDE_BY_SIDE")) + , m_xGrpPlotOptions(m_xBuilder->weld_widget("frameFL_PLOT_OPTIONS")) + , m_xGridPlotOptions(m_xBuilder->weld_widget("gridPLOT_OPTIONS")) + , m_xRB_DontPaint(m_xBuilder->weld_radio_button("RB_DONT_PAINT")) + , m_xRB_AssumeZero(m_xBuilder->weld_radio_button("RB_ASSUME_ZERO")) + , m_xRB_ContinueLine(m_xBuilder->weld_radio_button("RB_CONTINUE_LINE")) + , m_xCBIncludeHiddenCells(m_xBuilder->weld_check_button("CB_INCLUDE_HIDDEN_CELLS")) + , m_xCBHideLegendEntry(m_xBuilder->weld_check_button("CB_LEGEND_ENTRY_HIDDEN")) +{ + m_xRbtAxis1->connect_toggled(LINK(this, SchOptionTabPage, EnableHdl)); + m_xRbtAxis2->connect_toggled(LINK(this, SchOptionTabPage, EnableHdl)); +} + +SchOptionTabPage::~SchOptionTabPage() +{ +} + +IMPL_LINK_NOARG(SchOptionTabPage, EnableHdl, weld::Toggleable&, void) +{ + if( m_nAllSeriesAxisIndex == 0 ) + m_xCBAxisSideBySide->set_sensitive( m_xRbtAxis2->get_active()); + else if( m_nAllSeriesAxisIndex == 1 ) + m_xCBAxisSideBySide->set_sensitive( m_xRbtAxis1->get_active()); +} + +std::unique_ptr<SfxTabPage> SchOptionTabPage::Create(weld::Container* pPage, weld::DialogController* pController, + const SfxItemSet* rOutAttrs) +{ + return std::make_unique<SchOptionTabPage>(pPage, pController, *rOutAttrs); +} + +bool SchOptionTabPage::FillItemSet(SfxItemSet* rOutAttrs) +{ + if(m_xRbtAxis2->get_active()) + rOutAttrs->Put(SfxInt32Item(SCHATTR_AXIS,CHART_AXIS_SECONDARY_Y)); + else + rOutAttrs->Put(SfxInt32Item(SCHATTR_AXIS,CHART_AXIS_PRIMARY_Y)); + + if(m_xMTGap->get_visible()) + rOutAttrs->Put(SfxInt32Item(SCHATTR_BAR_GAPWIDTH,static_cast< sal_Int32 >( m_xMTGap->get_value(FieldUnit::PERCENT)))); + + if(m_xMTOverlap->get_visible()) + rOutAttrs->Put(SfxInt32Item(SCHATTR_BAR_OVERLAP,static_cast< sal_Int32 >( m_xMTOverlap->get_value(FieldUnit::PERCENT)))); + + if(m_xCBConnect->get_visible()) + rOutAttrs->Put(SfxBoolItem(SCHATTR_BAR_CONNECT,m_xCBConnect->get_active())); + + // model property is "group bars per axis", UI feature is the other way + // round: "show bars side by side" + if(m_xCBAxisSideBySide->get_visible()) + rOutAttrs->Put(SfxBoolItem(SCHATTR_GROUP_BARS_PER_AXIS, ! m_xCBAxisSideBySide->get_active())); + + if(m_xRB_DontPaint->get_active()) + rOutAttrs->Put(SfxInt32Item(SCHATTR_MISSING_VALUE_TREATMENT,css::chart::MissingValueTreatment::LEAVE_GAP)); + else if(m_xRB_AssumeZero->get_active()) + rOutAttrs->Put(SfxInt32Item(SCHATTR_MISSING_VALUE_TREATMENT,css::chart::MissingValueTreatment::USE_ZERO)); + else if(m_xRB_ContinueLine->get_active()) + rOutAttrs->Put(SfxInt32Item(SCHATTR_MISSING_VALUE_TREATMENT,css::chart::MissingValueTreatment::CONTINUE)); + + if (m_xCBIncludeHiddenCells->get_visible()) + rOutAttrs->Put(SfxBoolItem(SCHATTR_INCLUDE_HIDDEN_CELLS, m_xCBIncludeHiddenCells->get_active())); + + if(m_xCBHideLegendEntry->get_visible()) + rOutAttrs->Put(SfxBoolItem(SCHATTR_HIDE_LEGEND_ENTRY, m_xCBHideLegendEntry->get_active())); + + return true; +} + +void SchOptionTabPage::Reset(const SfxItemSet* rInAttrs) +{ + m_xRbtAxis1->set_active(true); + m_xRbtAxis2->set_active(false); + if (const SfxInt32Item* pAxisItem = rInAttrs->GetItemIfSet(SCHATTR_AXIS)) + { + tools::Long nVal = pAxisItem->GetValue(); + if(nVal==CHART_AXIS_SECONDARY_Y) + { + m_xRbtAxis2->set_active(true); + m_xRbtAxis1->set_active(false); + } + } + + tools::Long nTmp; + if (const SfxInt32Item* pGapWidthItem = rInAttrs->GetItemIfSet(SCHATTR_BAR_GAPWIDTH)) + { + nTmp = static_cast<tools::Long>(pGapWidthItem->GetValue()); + m_xMTGap->set_value(nTmp, FieldUnit::PERCENT); + } + + if (const SfxInt32Item* pOverlapItem = rInAttrs->GetItemIfSet(SCHATTR_BAR_OVERLAP)) + { + nTmp = static_cast<tools::Long>(pOverlapItem->GetValue()); + m_xMTOverlap->set_value(nTmp, FieldUnit::PERCENT); + } + + if (const SfxBoolItem* pConnectItem = rInAttrs->GetItemIfSet(SCHATTR_BAR_CONNECT)) + { + bool bCheck = pConnectItem->GetValue(); + m_xCBConnect->set_active(bCheck); + } + + if (const SfxInt32Item* pAllSeriesItem = rInAttrs->GetItemIfSet(SCHATTR_AXIS_FOR_ALL_SERIES)) + { + m_nAllSeriesAxisIndex = pAllSeriesItem->GetValue(); + m_xCBAxisSideBySide->set_sensitive(false); + } + if (const SfxBoolItem* pPerAxisItem = rInAttrs->GetItemIfSet(SCHATTR_GROUP_BARS_PER_AXIS)) + { + // model property is "group bars per axis", UI feature is the other way + // round: "show bars side by side" + bool bCheck = ! pPerAxisItem->GetValue(); + m_xCBAxisSideBySide->set_active( bCheck ); + } + else + { + m_xCBAxisSideBySide->hide(); + } + + //missing value treatment + { + std::vector< sal_Int32 > aMissingValueTreatments; + if (const SfxIntegerListItem* pValueTreatmentsItem = rInAttrs->GetItemIfSet(SCHATTR_AVAILABLE_MISSING_VALUE_TREATMENTS)) + aMissingValueTreatments = pValueTreatmentsItem->GetList(); + + const SfxInt32Item* pMissingValueTreatmentItem; + if ( aMissingValueTreatments.size()>1 && + (pMissingValueTreatmentItem = rInAttrs->GetItemIfSet(SCHATTR_MISSING_VALUE_TREATMENT)) ) + { + m_xRB_DontPaint->set_sensitive(false); + m_xRB_AssumeZero->set_sensitive(false); + m_xRB_ContinueLine->set_sensitive(false); + + for(int nVal : aMissingValueTreatments) + { + if(nVal==css::chart::MissingValueTreatment::LEAVE_GAP) + m_xRB_DontPaint->set_sensitive(true); + else if(nVal==css::chart::MissingValueTreatment::USE_ZERO) + m_xRB_AssumeZero->set_sensitive(true); + else if(nVal==css::chart::MissingValueTreatment::CONTINUE) + m_xRB_ContinueLine->set_sensitive(true); + } + + tools::Long nVal=pMissingValueTreatmentItem->GetValue(); + if(nVal==css::chart::MissingValueTreatment::LEAVE_GAP) + m_xRB_DontPaint->set_active(true); + else if(nVal==css::chart::MissingValueTreatment::USE_ZERO) + m_xRB_AssumeZero->set_active(true); + else if(nVal==css::chart::MissingValueTreatment::CONTINUE) + m_xRB_ContinueLine->set_active(true); + } + else + { + m_xGridPlotOptions->hide(); + } + } + + // Include hidden cells + if (const SfxBoolItem* pHiddenCellsItem = rInAttrs->GetItemIfSet(SCHATTR_INCLUDE_HIDDEN_CELLS)) + { + bool bVal = pHiddenCellsItem->GetValue(); + m_xCBIncludeHiddenCells->set_active(bVal); + } + else + { + m_xCBIncludeHiddenCells->hide(); + // check if the radiobutton guys above + // are visible. If they aren't, we can + // as well hide the whole frame + if(!m_xGridPlotOptions->get_visible()) + m_xGrpPlotOptions->hide(); + } + + if (const SfxBoolItem* pEntryItem = rInAttrs->GetItemIfSet(SCHATTR_HIDE_LEGEND_ENTRY)) + { + bool bVal = pEntryItem->GetValue(); + m_xCBHideLegendEntry->set_active(bVal); + } + + AdaptControlPositionsAndVisibility(); +} + +void SchOptionTabPage::Init( bool bProvidesSecondaryYAxis, bool bProvidesOverlapAndGapWidth, bool bProvidesBarConnectors ) +{ + m_bProvidesSecondaryYAxis = bProvidesSecondaryYAxis; + m_bProvidesOverlapAndGapWidth = bProvidesOverlapAndGapWidth; + m_bProvidesBarConnectors = bProvidesBarConnectors; + + AdaptControlPositionsAndVisibility(); +} + +void SchOptionTabPage::AdaptControlPositionsAndVisibility() +{ + m_xGrpAxis->set_visible(m_bProvidesSecondaryYAxis); + m_xGrpBar->set_visible(m_bProvidesOverlapAndGapWidth); + m_xCBConnect->set_visible(m_bProvidesBarConnectors); + + if (!m_xMTGap->get_visible() && !m_xMTOverlap->get_visible()) + m_xGrpBar->hide(); +} + +} //namespace chart + +/* vim:set shiftwidth=4 softtabstop=4 expandtab: */ |