diff options
Diffstat (limited to 'chart2/source/controller/itemsetwrapper/SeriesOptionsItemConverter.cxx')
| -rw-r--r-- | chart2/source/controller/itemsetwrapper/SeriesOptionsItemConverter.cxx | 435 |
1 files changed, 435 insertions, 0 deletions
diff --git a/chart2/source/controller/itemsetwrapper/SeriesOptionsItemConverter.cxx b/chart2/source/controller/itemsetwrapper/SeriesOptionsItemConverter.cxx new file mode 100644 index 000000000..2f84084a1 --- /dev/null +++ b/chart2/source/controller/itemsetwrapper/SeriesOptionsItemConverter.cxx @@ -0,0 +1,435 @@ +/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ +/* + * This file is part of the LibreOffice project. + * + * This Source Code Form is subject to the terms of the Mozilla Public + * License, v. 2.0. If a copy of the MPL was not distributed with this + * file, You can obtain one at http://mozilla.org/MPL/2.0/. + * + * This file incorporates work covered by the following license notice: + * + * Licensed to the Apache Software Foundation (ASF) under one or more + * contributor license agreements. See the NOTICE file distributed + * with this work for additional information regarding copyright + * ownership. The ASF licenses this file to you under the Apache + * License, Version 2.0 (the "License"); you may not use this file + * except in compliance with the License. You may obtain a copy of + * the License at http://www.apache.org/licenses/LICENSE-2.0 . + */ + +#include <SeriesOptionsItemConverter.hxx> +#include "SchWhichPairs.hxx" + +#include <ChartModelHelper.hxx> +#include <ChartType.hxx> +#include <Axis.hxx> +#include <AxisHelper.hxx> +#include <DiagramHelper.hxx> +#include <Diagram.hxx> +#include <ChartTypeHelper.hxx> +#include <DataSeriesHelper.hxx> +#include <ChartModel.hxx> +#include <BaseCoordinateSystem.hxx> + +#include <com/sun/star/chart2/XDataSeries.hpp> + +#include <svl/eitem.hxx> +#include <svl/intitem.hxx> +#include <svl/ilstitem.hxx> +#include <svx/sdangitm.hxx> +#include <tools/diagnose_ex.h> + +using namespace ::com::sun::star; +using namespace ::com::sun::star::chart2; + +namespace chart::wrapper +{ + +SeriesOptionsItemConverter::SeriesOptionsItemConverter( + const rtl::Reference<::chart::ChartModel>& xChartModel + , const uno::Reference< uno::XComponentContext > & xContext + , const uno::Reference< beans::XPropertySet >& xPropertySet + , SfxItemPool& rItemPool ) + : ItemConverter( xPropertySet, rItemPool ) + , m_xChartModel(xChartModel) + , m_xCC(xContext) + , m_bAttachToMainAxis(true) + , m_bSupportingOverlapAndGapWidthProperties(false) + , m_bSupportingBarConnectors(false) + , m_nBarOverlap(0) + , m_nGapWidth(100) + , m_bConnectBars(false) + , m_bSupportingAxisSideBySide(false) + , m_bGroupBarsPerAxis(true) + , m_bSupportingStartingAngle(false) + , m_nStartingAngle(90) + , m_bClockwise(false) + , m_nMissingValueTreatment(0) + , m_bSupportingPlottingOfHiddenCells(false) + , m_bIncludeHiddenCells(true) + , m_bHideLegendEntry(false) +{ + try + { + uno::Reference< XDataSeries > xDataSeries( xPropertySet, uno::UNO_QUERY ); + + m_bAttachToMainAxis = DiagramHelper::isSeriesAttachedToMainAxis( xDataSeries ); + + rtl::Reference< Diagram > xDiagram( ChartModelHelper::findDiagram(xChartModel) ); + rtl::Reference< ChartType > xChartType( DiagramHelper::getChartTypeOfSeries( xDiagram , xDataSeries ) ); + + m_xCooSys = DataSeriesHelper::getCoordinateSystemOfSeries( xDataSeries, xDiagram ); + if( m_xCooSys.is() ) + { + rtl::Reference< Axis > xAxis = AxisHelper::getAxis( 1, 0, m_xCooSys ); + chart2::ScaleData aScale( xAxis->getScaleData() ); + m_bClockwise = (aScale.Orientation == chart2::AxisOrientation_REVERSE); + } + + sal_Int32 nDimensionCount = DiagramHelper::getDimension( xDiagram ); + m_bSupportingOverlapAndGapWidthProperties = ChartTypeHelper::isSupportingOverlapAndGapWidthProperties( xChartType, nDimensionCount ); + + if( m_bSupportingOverlapAndGapWidthProperties ) + { + + sal_Int32 nAxisIndex = DataSeriesHelper::getAttachedAxisIndex(xDataSeries); + + uno::Sequence< sal_Int32 > aBarPositionSequence; + if( xChartType.is() ) + { + if( xChartType->getPropertyValue( "OverlapSequence" ) >>= aBarPositionSequence ) + { + if( nAxisIndex >= 0 && nAxisIndex < aBarPositionSequence.getLength() ) + m_nBarOverlap = aBarPositionSequence[nAxisIndex]; + } + if( xChartType->getPropertyValue( "GapwidthSequence" ) >>= aBarPositionSequence ) + { + if( nAxisIndex >= 0 && nAxisIndex < aBarPositionSequence.getLength() ) + m_nGapWidth = aBarPositionSequence[nAxisIndex]; + } + } + } + + m_bSupportingBarConnectors = ChartTypeHelper::isSupportingBarConnectors( xChartType, nDimensionCount ); + if( m_bSupportingBarConnectors && xDiagram.is() ) + { + xDiagram->getPropertyValue( "ConnectBars" ) >>= m_bConnectBars; + } + + m_bSupportingAxisSideBySide = ChartTypeHelper::isSupportingAxisSideBySide( xChartType, nDimensionCount ); + if( m_bSupportingAxisSideBySide && xDiagram.is() ) + { + xDiagram->getPropertyValue( "GroupBarsPerAxis" ) >>= m_bGroupBarsPerAxis; + } + + m_bSupportingStartingAngle = ChartTypeHelper::isSupportingStartingAngle( xChartType ); + if( m_bSupportingStartingAngle ) + { + xDiagram->getPropertyValue( "StartingAngle" ) >>= m_nStartingAngle; + } + + m_aSupportedMissingValueTreatments = ChartTypeHelper::getSupportedMissingValueTreatments( xChartType ); + m_nMissingValueTreatment = DiagramHelper::getCorrectedMissingValueTreatment( + ChartModelHelper::findDiagram(m_xChartModel), xChartType ); + + uno::Reference< beans::XPropertySet > xProp( m_xChartModel->getDataProvider(), uno::UNO_QUERY ); + if( xProp.is() ) + { + try + { + //test whether the data provider offers this property + xProp->getPropertyValue( "IncludeHiddenCells" ); + //if not exception is thrown the property is offered + m_bSupportingPlottingOfHiddenCells = true; + xDiagram->getPropertyValue( "IncludeHiddenCells" ) >>= m_bIncludeHiddenCells; + } + catch( const beans::UnknownPropertyException& ) + { + } + } + + m_bHideLegendEntry = !xPropertySet->getPropertyValue("ShowLegendEntry").get<bool>(); + } + catch( const uno::Exception & ) + { + DBG_UNHANDLED_EXCEPTION("chart2"); + } +} + +SeriesOptionsItemConverter::~SeriesOptionsItemConverter() +{ +} + +const WhichRangesContainer& SeriesOptionsItemConverter::GetWhichPairs() const +{ + // must span all used items! + return nSeriesOptionsWhichPairs; +} + +bool SeriesOptionsItemConverter::GetItemProperty( tWhichIdType /*nWhichId*/, tPropertyNameWithMemberId & /*rOutProperty*/ ) const +{ + return false; +} + +bool SeriesOptionsItemConverter::ApplySpecialItem( sal_uInt16 nWhichId, const SfxItemSet & rItemSet ) +{ + bool bChanged = false; + switch( nWhichId ) + { + case SCHATTR_AXIS: + { + sal_Int32 nItemValue = static_cast< const SfxInt32Item & >( + rItemSet.Get( nWhichId )).GetValue(); + bool bAttachToMainAxis = nItemValue == CHART_AXIS_PRIMARY_Y; + if( bAttachToMainAxis != m_bAttachToMainAxis ) + { + //change model: + bChanged = DiagramHelper::attachSeriesToAxis( bAttachToMainAxis, uno::Reference< XDataSeries >::query( GetPropertySet() ) + , ChartModelHelper::findDiagram(m_xChartModel), m_xCC ); + + if( bChanged ) + m_bAttachToMainAxis = bAttachToMainAxis; + } + } + break; + + case SCHATTR_BAR_OVERLAP: + case SCHATTR_BAR_GAPWIDTH: + { + if( m_bSupportingOverlapAndGapWidthProperties ) + { + sal_Int32& rBarPosition = ( nWhichId == SCHATTR_BAR_OVERLAP ) ? m_nBarOverlap : m_nGapWidth; + rBarPosition = static_cast< const SfxInt32Item & >( rItemSet.Get( nWhichId )).GetValue(); + + OUString aPropName("GapwidthSequence" ); + if( nWhichId == SCHATTR_BAR_OVERLAP ) + aPropName = "OverlapSequence"; + + uno::Reference< XDataSeries > xDataSeries( GetPropertySet(), uno::UNO_QUERY ); + rtl::Reference< Diagram > xDiagram( ChartModelHelper::findDiagram(m_xChartModel) ); + rtl::Reference< ChartType > xChartType( DiagramHelper::getChartTypeOfSeries( xDiagram , xDataSeries ) ); + if( xChartType.is() ) + { + sal_Int32 nAxisIndex = DataSeriesHelper::getAttachedAxisIndex(xDataSeries); + uno::Sequence< sal_Int32 > aBarPositionSequence; + if( xChartType->getPropertyValue( aPropName ) >>= aBarPositionSequence ) + { + bool bGroupBarsPerAxis = rItemSet.Get( SCHATTR_GROUP_BARS_PER_AXIS ).GetValue(); + if(!bGroupBarsPerAxis) + { + //set the same value for all axes + for( auto & pos : asNonConstRange(aBarPositionSequence) ) + pos = rBarPosition; + } + else if( nAxisIndex >= 0 && nAxisIndex < aBarPositionSequence.getLength() ) + aBarPositionSequence.getArray()[nAxisIndex] = rBarPosition; + + xChartType->setPropertyValue( aPropName, uno::Any(aBarPositionSequence) ); + bChanged = true; + } + } + } + } + break; + + case SCHATTR_BAR_CONNECT: + { + m_bConnectBars = static_cast< const SfxBoolItem & >( + rItemSet.Get( nWhichId )).GetValue(); + if( m_bSupportingBarConnectors ) + { + bool bOldConnectBars = false; + rtl::Reference< Diagram > xDiagramProperties( ChartModelHelper::findDiagram(m_xChartModel), uno::UNO_QUERY ); + if( xDiagramProperties.is() && + (xDiagramProperties->getPropertyValue( "ConnectBars" ) >>= bOldConnectBars) && + bOldConnectBars != m_bConnectBars ) + { + xDiagramProperties->setPropertyValue( "ConnectBars" , uno::Any(m_bConnectBars) ); + bChanged = true; + } + } + } + break; + + case SCHATTR_GROUP_BARS_PER_AXIS: + { + m_bGroupBarsPerAxis = static_cast< const SfxBoolItem & >( + rItemSet.Get( nWhichId )).GetValue(); + if( m_bSupportingAxisSideBySide ) + { + bool bOldGroupBarsPerAxis = true; + rtl::Reference< Diagram > xDiagramProperties( ChartModelHelper::findDiagram(m_xChartModel), uno::UNO_QUERY ); + if( xDiagramProperties.is() && + (xDiagramProperties->getPropertyValue( "GroupBarsPerAxis" ) >>= bOldGroupBarsPerAxis) && + bOldGroupBarsPerAxis != m_bGroupBarsPerAxis ) + { + xDiagramProperties->setPropertyValue( "GroupBarsPerAxis" , uno::Any(m_bGroupBarsPerAxis) ); + bChanged = true; + } + } + } + break; + + case SCHATTR_STARTING_ANGLE: + { + if( m_bSupportingStartingAngle ) + { + m_nStartingAngle = static_cast< const SdrAngleItem & >( rItemSet.Get( nWhichId )).GetValue().get() / 100; + rtl::Reference< Diagram > xDiagramProperties( ChartModelHelper::findDiagram(m_xChartModel), uno::UNO_QUERY ); + if( xDiagramProperties.is() ) + { + xDiagramProperties->setPropertyValue( "StartingAngle" , uno::Any(m_nStartingAngle) ); + bChanged = true; + } + } + } + break; + + case SCHATTR_CLOCKWISE: + { + bool bClockwise = static_cast< const SfxBoolItem & >( + rItemSet.Get( nWhichId )).GetValue(); + if( m_xCooSys.is() ) + { + rtl::Reference< Axis > xAxis = AxisHelper::getAxis( 1, 0, m_xCooSys ); + if( xAxis.is() ) + { + chart2::ScaleData aScaleData( xAxis->getScaleData() ); + aScaleData.Orientation = bClockwise ? chart2::AxisOrientation_REVERSE : chart2::AxisOrientation_MATHEMATICAL; + xAxis->setScaleData( aScaleData ); + bChanged = true; + } + } + } + break; + + case SCHATTR_MISSING_VALUE_TREATMENT: + { + if( m_aSupportedMissingValueTreatments.hasElements() ) + { + sal_Int32 nNew = static_cast< const SfxInt32Item & >( rItemSet.Get( nWhichId )).GetValue(); + if( m_nMissingValueTreatment != nNew ) + { + try + { + rtl::Reference< Diagram > xDiagramProperties( ChartModelHelper::findDiagram(m_xChartModel), uno::UNO_QUERY ); + if( xDiagramProperties.is() ) + { + xDiagramProperties->setPropertyValue( "MissingValueTreatment" , uno::Any( nNew )); + bChanged = true; + } + } + catch( const uno::Exception& ) + { + TOOLS_WARN_EXCEPTION("chart2", "" ); + } + } + } + } + break; + case SCHATTR_INCLUDE_HIDDEN_CELLS: + { + if( m_bSupportingPlottingOfHiddenCells ) + { + bool bIncludeHiddenCells = static_cast<const SfxBoolItem &>(rItemSet.Get(nWhichId)).GetValue(); + if (bIncludeHiddenCells != m_bIncludeHiddenCells) + { + if (m_xChartModel) + bChanged = ChartModelHelper::setIncludeHiddenCells( bIncludeHiddenCells, *m_xChartModel ); + } + } + } + break; + case SCHATTR_HIDE_LEGEND_ENTRY: + { + bool bHideLegendEntry = static_cast<const SfxBoolItem &>(rItemSet.Get(nWhichId)).GetValue(); + if (bHideLegendEntry != m_bHideLegendEntry) + { + GetPropertySet()->setPropertyValue("ShowLegendEntry", css::uno::Any(!bHideLegendEntry)); + } + } + break; + } + return bChanged; +} + +void SeriesOptionsItemConverter::FillSpecialItem( + sal_uInt16 nWhichId, SfxItemSet & rOutItemSet ) const +{ + switch( nWhichId ) + { + case SCHATTR_AXIS: + { + sal_Int32 nItemValue = m_bAttachToMainAxis ? CHART_AXIS_PRIMARY_Y : CHART_AXIS_SECONDARY_Y; + rOutItemSet.Put( SfxInt32Item(nWhichId,nItemValue ) ); + break; + } + case SCHATTR_BAR_OVERLAP: + { + if( m_bSupportingOverlapAndGapWidthProperties ) + rOutItemSet.Put( SfxInt32Item(nWhichId,m_nBarOverlap) ); + break; + } + case SCHATTR_BAR_GAPWIDTH: + { + if( m_bSupportingOverlapAndGapWidthProperties ) + rOutItemSet.Put( SfxInt32Item(nWhichId,m_nGapWidth) ); + break; + } + case SCHATTR_BAR_CONNECT: + { + if( m_bSupportingBarConnectors ) + rOutItemSet.Put( SfxBoolItem(nWhichId,m_bConnectBars)); + break; + } + case SCHATTR_GROUP_BARS_PER_AXIS: + { + if( m_bSupportingAxisSideBySide ) + rOutItemSet.Put( SfxBoolItem(nWhichId,m_bGroupBarsPerAxis) ); + break; + } + case SCHATTR_AXIS_FOR_ALL_SERIES: + { + break; + } + case SCHATTR_STARTING_ANGLE: + { + if( m_bSupportingStartingAngle ) + rOutItemSet.Put( SdrAngleItem(SCHATTR_STARTING_ANGLE, Degree100(m_nStartingAngle*100)) ); + break; + } + case SCHATTR_CLOCKWISE: + { + rOutItemSet.Put( SfxBoolItem(nWhichId,m_bClockwise) ); + break; + } + case SCHATTR_MISSING_VALUE_TREATMENT: + { + if( m_aSupportedMissingValueTreatments.hasElements() ) + rOutItemSet.Put( SfxInt32Item( nWhichId, m_nMissingValueTreatment )); + break; + } + case SCHATTR_AVAILABLE_MISSING_VALUE_TREATMENTS: + { + rOutItemSet.Put( SfxIntegerListItem( nWhichId, m_aSupportedMissingValueTreatments ) ); + break; + } + case SCHATTR_INCLUDE_HIDDEN_CELLS: + { + if( m_bSupportingPlottingOfHiddenCells ) + rOutItemSet.Put( SfxBoolItem(nWhichId, m_bIncludeHiddenCells) ); + break; + } + case SCHATTR_HIDE_LEGEND_ENTRY: + { + rOutItemSet.Put(SfxBoolItem(nWhichId, m_bHideLegendEntry)); + break; + } + default: + break; + } +} + +} // namespace chart + +/* vim:set shiftwidth=4 softtabstop=4 expandtab: */ |