diff options
Diffstat (limited to '')
| -rw-r--r-- | emfio/source/reader/emfreader.cxx | 2230 |
1 files changed, 2230 insertions, 0 deletions
diff --git a/emfio/source/reader/emfreader.cxx b/emfio/source/reader/emfreader.cxx new file mode 100644 index 000000000..1613fd859 --- /dev/null +++ b/emfio/source/reader/emfreader.cxx @@ -0,0 +1,2230 @@ +/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ +/* + * This file is part of the LibreOffice project. + * + * This Source Code Form is subject to the terms of the Mozilla Public + * License, v. 2.0. If a copy of the MPL was not distributed with this + * file, You can obtain one at http://mozilla.org/MPL/2.0/. + * + * This file incorporates work covered by the following license notice: + * + * Licensed to the Apache Software Foundation (ASF) under one or more + * contributor license agreements. See the NOTICE file distributed + * with this work for additional information regarding copyright + * ownership. The ASF licenses this file to you under the Apache + * License, Version 2.0 (the "License"); you may not use this file + * except in compliance with the License. You may obtain a copy of + * the License at http://www.apache.org/licenses/LICENSE-2.0 . + */ +#include <basegfx/polygon/b2dpolygontools.hxx> +#include <basegfx/polygon/b2dpolypolygoncutter.hxx> +#include <emfreader.hxx> +#include <sal/log.hxx> +#include <osl/diagnose.h> +#include <vcl/dibtools.hxx> +#include <o3tl/safeint.hxx> +#include <tools/stream.hxx> +#include <memory> +#include <unotools/configmgr.hxx> +#include <vcl/graph.hxx> +#include <vcl/pdfread.hxx> +#include <rtl/bootstrap.hxx> + +#ifdef DBG_UTIL +#include <vcl/pngwrite.hxx> +#endif + +// GDI-Array + +#define EMR_HEADER 1 +#define EMR_POLYBEZIER 2 +#define EMR_POLYGON 3 +#define EMR_POLYLINE 4 +#define EMR_POLYBEZIERTO 5 +#define EMR_POLYLINETO 6 +#define EMR_POLYPOLYLINE 7 +#define EMR_POLYPOLYGON 8 +#define EMR_SETWINDOWEXTEX 9 +#define EMR_SETWINDOWORGEX 10 +#define EMR_SETVIEWPORTEXTEX 11 +#define EMR_SETVIEWPORTORGEX 12 +#define EMR_SETBRUSHORGEX 13 +#define EMR_EOF 14 +#define EMR_SETPIXELV 15 +#define EMR_SETMAPPERFLAGS 16 +#define EMR_SETMAPMODE 17 +#define EMR_SETBKMODE 18 +#define EMR_SETPOLYFILLMODE 19 +#define EMR_SETROP2 20 +#define EMR_SETSTRETCHBLTMODE 21 +#define EMR_SETTEXTALIGN 22 +#define EMR_SETCOLORADJUSTMENT 23 +#define EMR_SETTEXTCOLOR 24 +#define EMR_SETBKCOLOR 25 +#define EMR_OFFSETCLIPRGN 26 +#define EMR_MOVETOEX 27 +#define EMR_SETMETARGN 28 +#define EMR_EXCLUDECLIPRECT 29 +#define EMR_INTERSECTCLIPRECT 30 +#define EMR_SCALEVIEWPORTEXTEX 31 +#define EMR_SCALEWINDOWEXTEX 32 +#define EMR_SAVEDC 33 +#define EMR_RESTOREDC 34 +#define EMR_SETWORLDTRANSFORM 35 +#define EMR_MODIFYWORLDTRANSFORM 36 +#define EMR_SELECTOBJECT 37 +#define EMR_CREATEPEN 38 +#define EMR_CREATEBRUSHINDIRECT 39 +#define EMR_DELETEOBJECT 40 +#define EMR_ANGLEARC 41 +#define EMR_ELLIPSE 42 +#define EMR_RECTANGLE 43 +#define EMR_ROUNDRECT 44 +#define EMR_ARC 45 +#define EMR_CHORD 46 +#define EMR_PIE 47 +#define EMR_SELECTPALETTE 48 +#define EMR_CREATEPALETTE 49 +#define EMR_SETPALETTEENTRIES 50 +#define EMR_RESIZEPALETTE 51 +#define EMR_REALIZEPALETTE 52 +#define EMR_EXTFLOODFILL 53 +#define EMR_LINETO 54 +#define EMR_ARCTO 55 +#define EMR_POLYDRAW 56 +#define EMR_SETARCDIRECTION 57 +#define EMR_SETMITERLIMIT 58 +#define EMR_BEGINPATH 59 +#define EMR_ENDPATH 60 +#define EMR_CLOSEFIGURE 61 +#define EMR_FILLPATH 62 +#define EMR_STROKEANDFILLPATH 63 +#define EMR_STROKEPATH 64 +#define EMR_FLATTENPATH 65 +#define EMR_WIDENPATH 66 +#define EMR_SELECTCLIPPATH 67 +#define EMR_ABORTPATH 68 + +#define EMR_COMMENT 70 // Contains arbitrary private data. +// Comment Identifiers: +#define EMR_COMMENT_EMFPLUS 0x2B464D45 // Contains embedded EMF+ records. +#define EMR_COMMENT_EMFSPOOL 0x00000000 // Contains embedded EMFSPOOL records. +#define EMR_COMMENT_PUBLIC 0x43494447 // Specify extensions to EMF processing. + +#define EMR_FILLRGN 71 +#define EMR_FRAMERGN 72 +#define EMR_INVERTRGN 73 +#define EMR_PAINTRGN 74 +#define EMR_EXTSELECTCLIPRGN 75 +#define EMR_BITBLT 76 +#define EMR_STRETCHBLT 77 +#define EMR_MASKBLT 78 +#define EMR_PLGBLT 79 +#define EMR_SETDIBITSTODEVICE 80 +#define EMR_STRETCHDIBITS 81 +#define EMR_EXTCREATEFONTINDIRECTW 82 +#define EMR_EXTTEXTOUTA 83 +#define EMR_EXTTEXTOUTW 84 +#define EMR_POLYBEZIER16 85 +#define EMR_POLYGON16 86 +#define EMR_POLYLINE16 87 +#define EMR_POLYBEZIERTO16 88 +#define EMR_POLYLINETO16 89 +#define EMR_POLYPOLYLINE16 90 +#define EMR_POLYPOLYGON16 91 +#define EMR_POLYDRAW16 92 +#define EMR_CREATEMONOBRUSH 93 +#define EMR_CREATEDIBPATTERNBRUSHPT 94 +#define EMR_EXTCREATEPEN 95 +#define EMR_POLYTEXTOUTA 96 +#define EMR_POLYTEXTOUTW 97 + +// WINDOWS VERSION >= 0x400 +#define EMR_SETICMMODE 98 +#define EMR_CREATECOLORSPACE 99 +#define EMR_SETCOLORSPACE 100 +#define EMR_DELETECOLORSPACE 101 +#define EMR_GLSRECORD 102 +#define EMR_GLSBOUNDEDRECORD 103 +#define EMR_PIXELFORMAT 104 + +// WINDOWS VERSION >= 0x500 +#define EMR_DRAWESCAPE 105 +#define EMR_EXTESCAPE 106 +#define EMR_STARTDOC 107 +#define EMR_SMALLTEXTOUT 108 +#define EMR_FORCEUFIMAPPING 109 +#define EMR_NAMEDESCAPE 110 +#define EMR_COLORCORRECTPALETTE 111 +#define EMR_SETICMPROFILEA 112 +#define EMR_SETICMPROFILEW 113 +#define EMR_ALPHABLEND 114 +#define EMR_ALPHADIBBLEND 115 +#define EMR_TRANSPARENTBLT 116 +#define EMR_TRANSPARENTDIB 117 +#define EMR_GRADIENTFILL 118 +#define EMR_SETLINKEDUFIS 119 +#define EMR_SETTEXTJUSTIFICATION 120 + +#define PDF_SIGNATURE 0x50444620 // "PDF " + +/* [MS-EMF] - v20210625 - page 28 */ +constexpr sal_Int32 ARCDIRECTION_CLOCKWISE = 0x00000002; + +namespace +{ + +const char * +record_type_name(sal_uInt32 nRecType) +{ +#ifndef SAL_LOG_INFO + (void) nRecType; + return ""; +#else + switch( nRecType ) + { + case EMR_HEADER: return "HEADER"; + case EMR_POLYBEZIER: return "POLYBEZIER"; + case EMR_POLYGON: return "POLYGON"; + case EMR_POLYLINE: return "POLYLINE"; + case EMR_POLYBEZIERTO: return "POLYBEZIERTO"; + case EMR_POLYLINETO: return "POLYLINETO"; + case EMR_POLYPOLYLINE: return "POLYPOLYLINE"; + case EMR_POLYPOLYGON: return "POLYPOLYGON"; + case EMR_SETWINDOWEXTEX: return "SETWINDOWEXTEX"; + case EMR_SETWINDOWORGEX: return "SETWINDOWORGEX"; + case EMR_SETVIEWPORTEXTEX: return "SETVIEWPORTEXTEX"; + case EMR_SETVIEWPORTORGEX: return "SETVIEWPORTORGEX"; + case EMR_SETBRUSHORGEX: return "SETBRUSHORGEX"; + case EMR_EOF: return "EOF"; + case EMR_SETPIXELV: return "SETPIXELV"; + case EMR_SETMAPPERFLAGS: return "SETMAPPERFLAGS"; + case EMR_SETMAPMODE: return "SETMAPMODE"; + case EMR_SETBKMODE: return "SETBKMODE"; + case EMR_SETPOLYFILLMODE: return "SETPOLYFILLMODE"; + case EMR_SETROP2: return "SETROP2"; + case EMR_SETSTRETCHBLTMODE: return "SETSTRETCHBLTMODE"; + case EMR_SETTEXTALIGN: return "SETTEXTALIGN"; + case EMR_SETCOLORADJUSTMENT: return "SETCOLORADJUSTMENT"; + case EMR_SETTEXTCOLOR: return "SETTEXTCOLOR"; + case EMR_SETBKCOLOR: return "SETBKCOLOR"; + case EMR_OFFSETCLIPRGN: return "OFFSETCLIPRGN"; + case EMR_MOVETOEX: return "MOVETOEX"; + case EMR_SETMETARGN: return "SETMETARGN"; + case EMR_EXCLUDECLIPRECT: return "EXCLUDECLIPRECT"; + case EMR_INTERSECTCLIPRECT: return "INTERSECTCLIPRECT"; + case EMR_SCALEVIEWPORTEXTEX: return "SCALEVIEWPORTEXTEX"; + case EMR_SCALEWINDOWEXTEX: return "SCALEWINDOWEXTEX"; + case EMR_SAVEDC: return "SAVEDC"; + case EMR_RESTOREDC: return "RESTOREDC"; + case EMR_SETWORLDTRANSFORM: return "SETWORLDTRANSFORM"; + case EMR_MODIFYWORLDTRANSFORM: return "MODIFYWORLDTRANSFORM"; + case EMR_SELECTOBJECT: return "SELECTOBJECT"; + case EMR_CREATEPEN: return "CREATEPEN"; + case EMR_CREATEBRUSHINDIRECT: return "CREATEBRUSHINDIRECT"; + case EMR_DELETEOBJECT: return "DELETEOBJECT"; + case EMR_ANGLEARC: return "ANGLEARC"; + case EMR_ELLIPSE: return "ELLIPSE"; + case EMR_RECTANGLE: return "RECTANGLE"; + case EMR_ROUNDRECT: return "ROUNDRECT"; + case EMR_ARC: return "ARC"; + case EMR_CHORD: return "CHORD"; + case EMR_PIE: return "PIE"; + case EMR_SELECTPALETTE: return "SELECTPALETTE"; + case EMR_CREATEPALETTE: return "CREATEPALETTE"; + case EMR_SETPALETTEENTRIES: return "SETPALETTEENTRIES"; + case EMR_RESIZEPALETTE: return "RESIZEPALETTE"; + case EMR_REALIZEPALETTE: return "REALIZEPALETTE"; + case EMR_EXTFLOODFILL: return "EXTFLOODFILL"; + case EMR_LINETO: return "LINETO"; + case EMR_ARCTO: return "ARCTO"; + case EMR_POLYDRAW: return "POLYDRAW"; + case EMR_SETARCDIRECTION: return "SETARCDIRECTION"; + case EMR_SETMITERLIMIT: return "SETMITERLIMIT"; + case EMR_BEGINPATH: return "BEGINPATH"; + case EMR_ENDPATH: return "ENDPATH"; + case EMR_CLOSEFIGURE: return "CLOSEFIGURE"; + case EMR_FILLPATH: return "FILLPATH"; + case EMR_STROKEANDFILLPATH: return "STROKEANDFILLPATH"; + case EMR_STROKEPATH: return "STROKEPATH"; + case EMR_FLATTENPATH: return "FLATTENPATH"; + case EMR_WIDENPATH: return "WIDENPATH"; + case EMR_SELECTCLIPPATH: return "SELECTCLIPPATH"; + case EMR_ABORTPATH: return "ABORTPATH"; + case EMR_COMMENT: return "COMMENT"; + case EMR_FILLRGN: return "FILLRGN"; + case EMR_FRAMERGN: return "FRAMERGN"; + case EMR_INVERTRGN: return "INVERTRGN"; + case EMR_PAINTRGN: return "PAINTRGN"; + case EMR_EXTSELECTCLIPRGN: return "EXTSELECTCLIPRGN"; + case EMR_BITBLT: return "BITBLT"; + case EMR_STRETCHBLT: return "STRETCHBLT"; + case EMR_MASKBLT: return "MASKBLT"; + case EMR_PLGBLT: return "PLGBLT"; + case EMR_SETDIBITSTODEVICE: return "SETDIBITSTODEVICE"; + case EMR_STRETCHDIBITS: return "STRETCHDIBITS"; + case EMR_EXTCREATEFONTINDIRECTW: return "EXTCREATEFONTINDIRECTW"; + case EMR_EXTTEXTOUTA: return "EXTTEXTOUTA"; + case EMR_EXTTEXTOUTW: return "EXTTEXTOUTW"; + case EMR_POLYBEZIER16: return "POLYBEZIER16"; + case EMR_POLYGON16: return "POLYGON16"; + case EMR_POLYLINE16: return "POLYLINE16"; + case EMR_POLYBEZIERTO16: return "POLYBEZIERTO16"; + case EMR_POLYLINETO16: return "POLYLINETO16"; + case EMR_POLYPOLYLINE16: return "POLYPOLYLINE16"; + case EMR_POLYPOLYGON16: return "POLYPOLYGON16"; + case EMR_POLYDRAW16: return "POLYDRAW16"; + case EMR_CREATEMONOBRUSH: return "CREATEMONOBRUSH"; + case EMR_CREATEDIBPATTERNBRUSHPT: return "CREATEDIBPATTERNBRUSHPT"; + case EMR_EXTCREATEPEN: return "EXTCREATEPEN"; + case EMR_POLYTEXTOUTA: return "POLYTEXTOUTA"; + case EMR_POLYTEXTOUTW: return "POLYTEXTOUTW"; + case EMR_SETICMMODE: return "SETICMMODE"; + case EMR_CREATECOLORSPACE: return "CREATECOLORSPACE"; + case EMR_SETCOLORSPACE: return "SETCOLORSPACE"; + case EMR_DELETECOLORSPACE: return "DELETECOLORSPACE"; + case EMR_GLSRECORD: return "GLSRECORD"; + case EMR_GLSBOUNDEDRECORD: return "GLSBOUNDEDRECORD"; + case EMR_PIXELFORMAT: return "PIXELFORMAT"; + case EMR_DRAWESCAPE: return "DRAWESCAPE"; + case EMR_EXTESCAPE: return "EXTESCAPE"; + case EMR_STARTDOC: return "STARTDOC"; + case EMR_SMALLTEXTOUT: return "SMALLTEXTOUT"; + case EMR_FORCEUFIMAPPING: return "FORCEUFIMAPPING"; + case EMR_NAMEDESCAPE: return "NAMEDESCAPE"; + case EMR_COLORCORRECTPALETTE: return "COLORCORRECTPALETTE"; + case EMR_SETICMPROFILEA: return "SETICMPROFILEA"; + case EMR_SETICMPROFILEW: return "SETICMPROFILEW"; + case EMR_ALPHABLEND: return "ALPHABLEND"; + case EMR_ALPHADIBBLEND: return "ALPHADIBBLEND"; + case EMR_TRANSPARENTBLT: return "TRANSPARENTBLT"; + case EMR_TRANSPARENTDIB: return "TRANSPARENTDIB"; + case EMR_GRADIENTFILL: return "GRADIENTFILL"; + case EMR_SETLINKEDUFIS: return "SETLINKEDUFIS"; + case EMR_SETTEXTJUSTIFICATION: return "SETTEXTJUSTIFICATION"; + default: + // Yes, return a pointer to a static buffer. This is a very + // local debugging output function, so no big deal. + static char buffer[11]; + sprintf(buffer, "0x%08" SAL_PRIxUINT32, nRecType); + return buffer; + } +#endif +} + +struct BLENDFUNCTION +{ + unsigned char aBlendOperation; + unsigned char aBlendFlags; + unsigned char aSrcConstantAlpha; + unsigned char aAlphaFormat; + + friend SvStream& operator>>(SvStream& rInStream, BLENDFUNCTION& rBlendFun); +}; + +SvStream& operator>>(SvStream& rInStream, BLENDFUNCTION& rBlendFun) +{ + rInStream.ReadUChar(rBlendFun.aBlendOperation); + rInStream.ReadUChar(rBlendFun.aBlendFlags); + rInStream.ReadUChar(rBlendFun.aSrcConstantAlpha); + rInStream.ReadUChar(rBlendFun.aAlphaFormat); + return rInStream; +} + +bool ImplReadRegion( basegfx::B2DPolyPolygon& rPolyPoly, SvStream& rStream, sal_uInt32 nLen ) +{ + if (nLen < 32) // 32 bytes - Size of RegionDataHeader + return false; + + sal_uInt32 nHdSize, nType, nCountRects, nRgnSize; + rStream.ReadUInt32(nHdSize); + rStream.ReadUInt32(nType); + rStream.ReadUInt32(nCountRects); + rStream.ReadUInt32(nRgnSize); + + sal_Int32 nLeft, nTop, nRight, nBottom; + //bounds of the region + rStream.ReadInt32(nLeft); + rStream.ReadInt32(nTop); + rStream.ReadInt32(nRight); + rStream.ReadInt32(nBottom); + + if (!rStream.good() || nCountRects == 0 || nType != emfio::RDH_RECTANGLES) + return false; + + SAL_INFO("emfio", "\t\tBounds Left: " << nLeft << ", top: " << nTop << ", right: " << nRight << ", bottom: " << nBottom); + + nLen -= 32; + + sal_uInt32 nSize; + if (o3tl::checked_multiply<sal_uInt32>(nCountRects, 16, nSize)) + return false; + if (nLen < nSize) + return false; + + for (sal_uInt32 i = 0; i < nCountRects; ++i) + { + rStream.ReadInt32(nLeft); + rStream.ReadInt32(nTop); + rStream.ReadInt32(nRight); + rStream.ReadInt32(nBottom); + rPolyPoly.append( basegfx::utils::createPolygonFromRect( ::basegfx::B2DRectangle( nLeft, nTop, nRight, nBottom ) ) ); + SAL_INFO("emfio", "\t\t" << i << " Left: " << nLeft << ", top: " << nTop << ", right: " << nRight << ", bottom: " << nBottom); + } + if (!utl::ConfigManager::IsFuzzing()) + { + rPolyPoly = basegfx::utils::solveCrossovers(rPolyPoly); + rPolyPoly = basegfx::utils::stripNeutralPolygons(rPolyPoly); + rPolyPoly = basegfx::utils::stripDispensablePolygons(rPolyPoly); + } + return true; +} + +} // anonymous namespace + +namespace emfio +{ + EmfReader::EmfReader(SvStream& rStream,GDIMetaFile& rGDIMetaFile) + : MtfTools(rGDIMetaFile, rStream) + , mnRecordCount(0) + , mbRecordPath(false) + , mbEMFPlus(false) + , mbEMFPlusDualMode(false) + { + } + + EmfReader::~EmfReader() + { + } + + const sal_uInt32 EMR_COMMENT_BEGINGROUP = 0x00000002; + const sal_uInt32 EMR_COMMENT_ENDGROUP = 0x00000003; + const sal_uInt32 EMR_COMMENT_MULTIFORMATS = 0x40000004; + const sal_uInt32 EMR_COMMENT_WINDOWS_METAFILE = 0x80000001; + + void EmfReader::ReadGDIComment(sal_uInt32 nCommentId) + { + sal_uInt32 nPublicCommentIdentifier(0); + mpInputStream->ReadUInt32(nPublicCommentIdentifier); + + SAL_INFO("emfio", "\t\tEMR_COMMENT_PUBLIC, id: 0x" << std::hex << nCommentId << std::dec); + switch (nPublicCommentIdentifier) + { + case EMR_COMMENT_BEGINGROUP: + { + SAL_INFO("emfio", "\t\t\tEMR_COMMENT_BEGINGROUP"); + sal_uInt32 left, top, right, bottom; + mpInputStream->ReadUInt32(left).ReadUInt32(top).ReadUInt32(right).ReadUInt32(bottom); + + SAL_INFO("emfio", "\t\t\t\tBounding rect"); + SAL_INFO("emfio", "\t\t\t\t\tLeft: " << left); + SAL_INFO("emfio", "\t\t\t\t\tTop: " << top); + SAL_INFO("emfio", "\t\t\t\t\tRight: " << right); + SAL_INFO("emfio", "\t\t\t\t\tBottom: " << bottom); + + sal_uInt32 nDescChars(0); + mpInputStream->ReadUInt32(nDescChars); + + OUString aDesc; + for (sal_uInt32 i=0; i < nDescChars; i++) + { + sal_uInt16 cChar(0); + mpInputStream->ReadUInt16(cChar); + if (cChar == '\0') + break; + + sal_Unicode cUniChar = static_cast<sal_Unicode>(cChar); + aDesc = aDesc + OUStringChar(cUniChar); + } + + SAL_INFO("emfio", "\t\tDescription: " << aDesc); + } + break; + + case EMR_COMMENT_ENDGROUP: + SAL_INFO("emfio", "\t\t\tEMR_COMMENT_ENDGROUP"); + break; + + case EMR_COMMENT_MULTIFORMATS: + ReadMultiformatsComment(); + break; + + case EMR_COMMENT_WINDOWS_METAFILE: + SAL_WARN("emfio", "\t\tEMR_COMMENT_WINDOWS_METAFILE not implemented"); + break; + + default: + SAL_WARN("emfio", "\t\tEMR_COMMENT_PUBLIC not implemented, id: 0x" << std::hex << nCommentId << std::dec); + break; + } + } + + void EmfReader::ReadMultiformatsComment() + { + tools::Rectangle aOutputRect = EmfReader::ReadRectangle(); + + sal_uInt32 nCountFormats(0); + mpInputStream->ReadUInt32(nCountFormats); + if (nCountFormats < 1) + { + return; + } + + // Read the first EmrFormat. + sal_uInt32 nSignature(0); + mpInputStream->ReadUInt32(nSignature); + if (nSignature != PDF_SIGNATURE) + { + return; + } + + sal_uInt32 nVersion(0); + mpInputStream->ReadUInt32(nVersion); + if (nVersion != 1) + { + return; + } + + sal_uInt32 nSizeData(0); + mpInputStream->ReadUInt32(nSizeData); + if (!nSizeData || nSizeData > mpInputStream->remainingSize()) + { + return; + } + + sal_uInt32 nOffData(0); + mpInputStream->ReadUInt32(nOffData); + if (!nOffData) + { + return; + } + + std::vector<char> aPdfData(nSizeData); + mpInputStream->ReadBytes(aPdfData.data(), aPdfData.size()); + if (!mpInputStream->good()) + { + return; + } + + SvMemoryStream aPdfStream; + aPdfStream.WriteBytes(aPdfData.data(), aPdfData.size()); + aPdfStream.Seek(0); + Graphic aGraphic; + if (!vcl::ImportPDF(aPdfStream, aGraphic)) + { + return; + } + + // aGraphic will be the only output of the EMF parser, so its size hint can be the same as + // ours. + aGraphic.getVectorGraphicData()->setSizeHint(maSizeHint); + + maBmpSaveList.emplace_back( + aGraphic.GetBitmapEx(), aOutputRect, SRCCOPY, /*bForceAlpha=*/true); + const std::shared_ptr<VectorGraphicData> pVectorGraphicData + = aGraphic.getVectorGraphicData(); + if (!pVectorGraphicData) + { + return; + } + + if (pVectorGraphicData->getType() != VectorGraphicDataType::Pdf) + { + return; + } + + mbReadOtherGraphicFormat = true; + } + + void EmfReader::ReadEMFPlusComment(sal_uInt32 length, bool& bHaveDC) + { + if (!mbEMFPlus) + { + PassEMFPlusHeaderInfo(); + + #if OSL_DEBUG_LEVEL > 1 + // debug code - write the stream to debug file /tmp/emf-stream.emf + sal_uInt64 const pos = mpInputStream->Tell(); + mpInputStream->Seek(0); + SvFileStream file( OUString( "/tmp/emf-stream.emf" ), StreamMode::WRITE | StreamMode::TRUNC ); + + mpInputStream->WriteStream(file); + file.Flush(); + file.Close(); + + mpInputStream->Seek( pos ); + #endif + + } + + mbEMFPlus = true; + sal_uInt64 const pos = mpInputStream->Tell(); + auto buffer = std::make_unique<char[]>( length ); + PassEMFPlus( buffer.get(), mpInputStream->ReadBytes(buffer.get(), length) ); + buffer.reset(); + mpInputStream->Seek( pos ); + + bHaveDC = false; + + // skip in SeekRel if impossibly unavailable + sal_uInt32 nRemainder = length; + + const size_t nRequiredHeaderSize = 12; + while (nRemainder >= nRequiredHeaderSize) + { + sal_uInt16 type(0), flags(0); + sal_uInt32 size(0), dataSize(0); + + mpInputStream->ReadUInt16( type ).ReadUInt16( flags ).ReadUInt32( size ).ReadUInt32( dataSize ); + nRemainder -= nRequiredHeaderSize; + + SAL_INFO("emfio", "\t\tEMF+ record type: 0x" << std::hex << type << std::dec); + + // Get Device Context + // TODO We should use EmfPlusRecordType::GetDC instead + if( type == 0x4004 ) + { + bHaveDC = true; + SAL_INFO("emfio", "\t\tEMF+ lock DC (device context)"); + } + + // look for the "dual mode" in header + // it indicates that either EMF or EMF+ records should be processed + // 0x4001 = EMF+ header + // flags & 1 = dual mode active + if ( type == 0x4001 && flags & 1 ) + { + mbEMFPlusDualMode = true; + SAL_INFO ("emfio", "\t\tEMF+ dual mode detected"); + } + + // Get the length of the remaining data of this record based + // on the alleged size + sal_uInt32 nRemainingRecordData = size >= nRequiredHeaderSize ? + size-nRequiredHeaderSize : 0; + // clip to available size + nRemainingRecordData = std::min(nRemainingRecordData, nRemainder); + mpInputStream->SeekRel(nRemainingRecordData); + nRemainder -= nRemainingRecordData; + } + mpInputStream->SeekRel(nRemainder); + } + + // these are referenced from inside the templates + static SvStream& operator >> (SvStream& rStream, sal_Int16 &n) + { + return rStream.ReadInt16(n); + } + + static SvStream& operator >> (SvStream& rStream, sal_Int32 &n) + { + return rStream.ReadInt32(n); + } + + /** + * Reads polygons from the stream. + * The \<class T> parameter is for the type of the points (sal_uInt32 or sal_uInt16). + * skipFirst: if the first point read is the 0th point or the 1st point in the array. + * */ + template <class T> + tools::Polygon EmfReader::ReadPolygonWithSkip(const bool skipFirst, sal_uInt32 nNextPos) + { + sal_uInt32 nPoints(0), nStartIndex(0); + mpInputStream->SeekRel( 16 ); + mpInputStream->ReadUInt32( nPoints ); + if (skipFirst) + { + nPoints ++; + nStartIndex ++; + } + + return ReadPolygon<T>(nStartIndex, nPoints, nNextPos); + } + + /** + * Reads polygons from the stream. + * The \<class T> parameter is for the type of the points + * nStartIndex: which is the starting index in the polygon of the first point read + * nPoints: number of points + * mpInputStream: the stream containing the polygons + * */ + template <class T> + tools::Polygon EmfReader::ReadPolygon(sal_uInt32 nStartIndex, sal_uInt32 nPoints, sal_uInt32 nNextPos) + { + SAL_INFO ("emfio", "\t\tPolygon:"); + + bool bRecordOk = nPoints <= SAL_MAX_UINT16; + SAL_WARN_IF(!bRecordOk, "emfio", "polygon record has more polygons than we can handle"); + if (!bRecordOk || !nPoints) + return tools::Polygon(); + + auto nRemainingSize = std::min(nNextPos - mpInputStream->Tell(), mpInputStream->remainingSize()); + auto nMaxPossiblePoints = nRemainingSize / (sizeof(T) * 2); + auto nPointCount = nPoints - nStartIndex; + if (nPointCount > nMaxPossiblePoints) + { + SAL_WARN("emfio", "polygon claims more points than record can provide, truncating"); + nPoints = nMaxPossiblePoints + nStartIndex; + } + + tools::Polygon aPolygon(nPoints); + for (sal_uInt32 i = nStartIndex ; i < nPoints && mpInputStream->good(); i++ ) + { + T nX, nY; + *mpInputStream >> nX >> nY; + + SAL_INFO("emfio", "\t\t\tPoint " << i << " of " << nPoints - 1 << ": " << nX << ", " << nY); + + if (!mpInputStream->good()) + { + SAL_WARN("emfio", "short read on polygon, truncating"); + aPolygon.SetSize(i); + break; + } + aPolygon[ i ] = Point( nX, nY ); + } + + return aPolygon; + } + + /** + * Reads a polyline from the WMF file and draws it + * The \<class T> parameter refers to the type of the points. (e.g. sal_uInt16 or sal_uInt32) + * */ + template <class T> + void EmfReader::ReadAndDrawPolyLine(sal_uInt32 nNextPos) + { + SAL_INFO("emfio", "\t\tPolyline: "); + + mpInputStream->SeekRel( 0x10 ); // TODO Skipping Bounds. A 128-bit WMF RectL object (specifies the bounding rectangle in device units.) + + sal_uInt32 nNumberOfPolylines = 0; + mpInputStream->ReadUInt32( nNumberOfPolylines ); + SAL_INFO("emfio", "\t\t\tPolylines: " << nNumberOfPolylines); + + sal_uInt32 nCount = 0; + mpInputStream->ReadUInt32( nCount ); // total number of points in all polylines + SAL_INFO("emfio", "\t\t\tPoints: " << nCount); + + const auto nEndPos = std::min(nNextPos, mnEndPos); + if (mpInputStream->Tell() >= nEndPos) + return; + + // taking the amount of points of each polygon, retrieving the total number of points + if ( !(mpInputStream->good() && + ( nNumberOfPolylines < SAL_MAX_UINT32 / sizeof( sal_uInt16 ) ) && + ( nNumberOfPolylines * sizeof( sal_uInt16 ) ) <= ( nEndPos - mpInputStream->Tell() )) + ) + return; + + std::unique_ptr< sal_uInt32[] > pnPolylinePointCount( new sal_uInt32[ nNumberOfPolylines ] ); + for ( sal_uInt32 i = 0; i < nNumberOfPolylines && mpInputStream->good(); i++ ) + { + sal_uInt32 nPoints; + mpInputStream->ReadUInt32( nPoints ); + SAL_INFO("emfio", "\t\t\tPoint " << i << " of " << nNumberOfPolylines << ": " << nPoints); + pnPolylinePointCount[ i ] = nPoints; + } + + // Get polyline points: + for ( sal_uInt32 i = 0; ( i < nNumberOfPolylines ) && mpInputStream->good(); i++ ) + { + tools::Polygon aPolygon = ReadPolygon<T>(0, pnPolylinePointCount[i], nNextPos); + DrawPolyLine(std::move(aPolygon), false, mbRecordPath); + } + } + + /** + * Reads a poly polygon from the WMF file and draws it. + * The \<class T> parameter refers to the type of the points. (e.g. sal_uInt16 or sal_uInt32) + * */ + template <class T> + void EmfReader::ReadAndDrawPolyPolygon(sal_uInt32 nNextPos) + { + SAL_INFO("emfio", "\t\tPolygon: "); + mpInputStream->SeekRel( 0x10 ); // RectL bounds + + sal_uInt32 nPoly(0), nGesPoints(0), nReadPoints(0); + // Number of polygons + mpInputStream->ReadUInt32( nPoly ).ReadUInt32( nGesPoints ); + SAL_INFO("emfio", "\t\t\tPolygons: " << nPoly); + SAL_INFO("emfio", "\t\t\tPoints: " << nGesPoints); + + const auto nEndPos = std::min(nNextPos, mnEndPos); + if (mpInputStream->Tell() >= nEndPos) + return; + if (!mpInputStream->good()) + return; + //check against numeric overflowing + if (nGesPoints >= SAL_MAX_UINT32 / sizeof(Point)) + return; + if (nPoly >= SAL_MAX_UINT32 / sizeof(sal_uInt16)) + return; + if (nPoly * sizeof(sal_uInt16) > nEndPos - mpInputStream->Tell()) + return; + + // Get number of points in each polygon + std::vector<sal_uInt16> aPoints(nPoly); + for (sal_uInt32 i = 0; i < nPoly && mpInputStream->good(); ++i) + { + sal_uInt32 nPoints(0); + mpInputStream->ReadUInt32( nPoints ); + + SAL_INFO("emfio", "\t\t\t\tPolygon " << i << " points: " << nPoints); + + aPoints[i] = static_cast<sal_uInt16>(nPoints); + } + + if ( mpInputStream->good() && ( nGesPoints * (sizeof(T)+sizeof(T)) ) <= ( nEndPos - mpInputStream->Tell() ) ) + { + // Get polygon points + tools::PolyPolygon aPolyPoly(nPoly); + for (sal_uInt32 i = 0; i < nPoly && mpInputStream->good(); ++i) + { + const sal_uInt16 nPointCount(aPoints[i]); + std::vector<Point> aPtAry(nPointCount); + for (sal_uInt16 j = 0; j < nPointCount && mpInputStream->good(); ++j) + { + T nX(0), nY(0); + *mpInputStream >> nX >> nY; + aPtAry[j] = Point( nX, nY ); + ++nReadPoints; + } + + aPolyPoly.Insert(tools::Polygon(aPtAry.size(), aPtAry.data())); + } + + DrawPolyPolygon(aPolyPoly, mbRecordPath); + } + + OSL_ENSURE(nReadPoints == nGesPoints, "The number Points processed from EMR_POLYPOLYGON is unequal imported number (!)"); + } + + bool EmfReader::ReadEnhWMF() + { + sal_uInt32 nStretchBltMode = 0; + sal_uInt32 nNextPos(0), + nW(0), nH(0), nColor(0), nIndex(0), + nDat32(0), nNom1(0), nDen1(0), nNom2(0), nDen2(0); + sal_Int32 nX32(0), nY32(0), nx32(0), ny32(0); + + bool bStatus = ReadHeader(); + bool bHaveDC = false; + + OUString aEMFPlusDisable; + rtl::Bootstrap::get("EMF_PLUS_DISABLE", aEMFPlusDisable); + bool bEnableEMFPlus = aEMFPlusDisable.isEmpty(); + if (!mbEnableEMFPlus) + { + // EMF+ is enabled if neither the bootstrap variable, not the member variable disables + // it. + bEnableEMFPlus = mbEnableEMFPlus; + } + + SAL_INFO("emfio", "EMF+ reading is " << (bEnableEMFPlus ? "enabled" : "disabled")); + + while (bStatus && mnRecordCount-- && mpInputStream->good() && !mbReadOtherGraphicFormat) + { + sal_uInt32 nRecType(0), nRecSize(0); + mpInputStream->ReadUInt32(nRecType).ReadUInt32(nRecSize); + + if ( !mpInputStream->good() || ( nRecSize < 8 ) || ( nRecSize & 3 ) ) // Parameters are always divisible by 4 + { + bStatus = false; + break; + } + + auto nCurPos = mpInputStream->Tell(); + + if (mnEndPos < nCurPos - 8) + { + bStatus = false; + break; + } + + const sal_uInt32 nMaxPossibleRecSize = mnEndPos - (nCurPos - 8); + if (nRecSize > nMaxPossibleRecSize) + { + bStatus = false; + break; + } + + nNextPos = nCurPos + (nRecSize - 8); + + if( !maBmpSaveList.empty() + && ( nRecType != EMR_STRETCHBLT ) + && ( nRecType != EMR_STRETCHDIBITS ) + ) { + ResolveBitmapActions( maBmpSaveList ); + } + + bool bFlag = false; + + SAL_INFO("emfio", "0x" << std::hex << (nNextPos - nRecSize) << "-0x" << nNextPos << " " << record_type_name(nRecType) << " size: " + << std::dec << nRecSize); + + if( bEnableEMFPlus && nRecType == EMR_COMMENT ) + { + sal_uInt32 length; + + mpInputStream->ReadUInt32( length ); + + SAL_INFO("emfio", "\tGDI comment, length: " << length); + + if( mpInputStream->good() && length >= 4 && length <= mpInputStream->remainingSize() ) { + sal_uInt32 nCommentId; + + mpInputStream->ReadUInt32( nCommentId ); + + SAL_INFO("emfio", "\t\tbegin " << static_cast<char>(nCommentId & 0xff) << static_cast<char>((nCommentId & 0xff00) >> 8) << static_cast<char>((nCommentId & 0xff0000) >> 16) << static_cast<char>((nCommentId & 0xff000000) >> 24) << " id: 0x" << std::hex << nCommentId << std::dec); + + if( nCommentId == EMR_COMMENT_EMFPLUS && nRecSize >= 12 ) + { + // [MS-EMF] 2.3.3: DataSize includes both CommentIdentifier and CommentRecordParm fields. + // We have already read 4-byte CommentIdentifier, so reduce length appropriately + ReadEMFPlusComment( length-4, bHaveDC ); + } + else if( nCommentId == EMR_COMMENT_PUBLIC && nRecSize >= 12 ) + { + ReadGDIComment(nCommentId); + } + else if( nCommentId == EMR_COMMENT_EMFSPOOL && nRecSize >= 12 ) + { + SAL_WARN("emfio", "\t\tEMFSPOOL not implemented, id: 0x" << std::hex << nCommentId << std::dec); + // TODO Implement reading EMFSPOOL comment + + } + else + { + SAL_WARN("emfio", "\t\tunknown id: 0x" << std::hex << nCommentId << std::dec); + } + } + } + else if ( !bHaveDC && mbEMFPlusDualMode && nRecType != EMR_HEADER && nRecType != EMR_EOF ) + { + // skip content (EMF record) in dual mode + // we process only EMR_COMMENT (see above) to access EMF+ data + // with 2 exceptions, according to EMF+ specification: + // EMR_HEADER and EMR_EOF + // if a device context is given (bHaveDC) process the following EMF record, too. + } + else if( !mbEMFPlus || bHaveDC || nRecType == EMR_EOF ) + { + switch( nRecType ) + { + case EMR_POLYBEZIERTO : + DrawPolyBezier(ReadPolygonWithSkip<sal_Int32>(true, nNextPos), true, mbRecordPath); + break; + case EMR_POLYBEZIER : + DrawPolyBezier(ReadPolygonWithSkip<sal_Int32>(false, nNextPos), false, mbRecordPath); + break; + + case EMR_POLYGON : + DrawPolygon(ReadPolygonWithSkip<sal_Int32>(false, nNextPos), mbRecordPath); + break; + + case EMR_POLYLINETO : + DrawPolyLine(ReadPolygonWithSkip<sal_Int32>(true, nNextPos), true, mbRecordPath); + break; + + case EMR_POLYLINE : + DrawPolyLine(ReadPolygonWithSkip<sal_Int32>(false, nNextPos), false, mbRecordPath); + break; + + case EMR_POLYPOLYLINE : + ReadAndDrawPolyLine<sal_Int32>(nNextPos); + break; + + case EMR_POLYPOLYGON : + ReadAndDrawPolyPolygon<sal_Int32>(nNextPos); + break; + + case EMR_SETWINDOWEXTEX : + { + sal_Int32 w = 0, h = 0; + mpInputStream->ReadInt32( w ).ReadInt32( h ); + SAL_INFO("emfio", "\t\tWidth: " << w); + SAL_INFO("emfio", "\t\tHeight: " << h); + SetWinExt( Size( w, h ), true); + } + break; + + case EMR_SETWINDOWORGEX : + { + mpInputStream->ReadInt32( nX32 ).ReadInt32( nY32 ); + SAL_INFO("emfio", "\t\tPoint: (" << nX32 << ", " << nY32 << ")"); + SetWinOrg( Point( nX32, nY32 ), true); + } + break; + + case EMR_SCALEWINDOWEXTEX : + { + mpInputStream->ReadUInt32( nNom1 ).ReadUInt32( nDen1 ).ReadUInt32( nNom2 ).ReadUInt32( nDen2 ); + SAL_INFO("emfio", "\t\tHorizontal scale: " << nNom1 << " / " << nDen1); + SAL_INFO("emfio", "\t\tVertical scale: " << nNom2 << " / " << nDen2); + + if (nDen1 != 0 && nDen2 != 0) + ScaleWinExt( static_cast<double>(nNom1) / nDen1, static_cast<double>(nNom2) / nDen2 ); + else + SAL_WARN("vcl.emf", "ignoring bogus divide by zero"); + } + break; + + case EMR_SETVIEWPORTORGEX : + { + mpInputStream->ReadInt32( nX32 ).ReadInt32( nY32 ); + SAL_INFO("emfio", "\t\tPoint: (" << nX32 << ", " << nY32 << ")"); + SetDevOrg( Point( nX32, nY32 ) ); + } + break; + + case EMR_SCALEVIEWPORTEXTEX : + { + mpInputStream->ReadUInt32( nNom1 ).ReadUInt32( nDen1 ).ReadUInt32( nNom2 ).ReadUInt32( nDen2 ); + SAL_INFO("emfio", "\t\tHorizontal scale: " << nNom1 << " / " << nDen1); + SAL_INFO("emfio", "\t\tVertical scale: " << nNom2 << " / " << nDen2); + + if (nDen1 != 0 && nDen2 != 0) + ScaleDevExt( static_cast<double>(nNom1) / nDen1, static_cast<double>(nNom2) / nDen2 ); + else + SAL_WARN("vcl.emf", "ignoring bogus divide by zero"); + } + break; + + case EMR_SETVIEWPORTEXTEX : + { + sal_Int32 w = 0, h = 0; + mpInputStream->ReadInt32( w ).ReadInt32( h ); + SAL_INFO("emfio", "\t\tWidth: " << w); + SAL_INFO("emfio", "\t\tHeight: " << h); + + SetDevExt( Size( w, h ) ); + } + break; + + case EMR_EOF : + mnRecordCount = 0; + break; + + case EMR_SETPIXELV : + { + mpInputStream->ReadInt32( nX32 ).ReadInt32( nY32 ); + SAL_INFO("emfio", "\t\tPoint: (" << nX32 << ", " << nY32 << ")"); + DrawPixel( Point( nX32, nY32 ), ReadColor() ); + } + break; + + case EMR_SETMAPMODE : + { + sal_uInt32 nMapMode(0); + mpInputStream->ReadUInt32( nMapMode ); + SAL_INFO("emfio", "\t\tMapMode: 0x" << std::hex << nMapMode << std::dec); + SetMapMode( static_cast<MappingMode>(nMapMode) ); + } + break; + + case EMR_SETBKMODE : + { + mpInputStream->ReadUInt32( nDat32 ); + SAL_INFO("emfio", "\t\tBkMode: 0x" << std::hex << nDat32 << std::dec); + SetBkMode( static_cast<BackgroundMode>(nDat32) ); + } + break; + + case EMR_SETPOLYFILLMODE : + break; + + case EMR_SETROP2 : + { + mpInputStream->ReadUInt32( nDat32 ); + SAL_INFO("emfio", "\t\tROP2: 0x" << std::hex << nDat32 << std::dec); + SetRasterOp( static_cast<WMFRasterOp>(nDat32) ); + } + break; + + case EMR_SETSTRETCHBLTMODE : + { + mpInputStream->ReadUInt32( nStretchBltMode ); + SAL_INFO("emfio", "\t\tStretchBltMode: 0x" << std::hex << nDat32 << std::dec); + } + break; + + case EMR_SETTEXTALIGN : + { + mpInputStream->ReadUInt32( nDat32 ); + SAL_INFO("emfio", "\t\tTextAlign: 0x" << std::hex << nDat32 << std::dec); + SetTextAlign( nDat32 ); + } + break; + + case EMR_SETTEXTCOLOR : + { + SetTextColor( ReadColor() ); + } + break; + + case EMR_SETARCDIRECTION: + { + mpInputStream->ReadUInt32(nIndex); + SetArcDirection(nIndex == ARCDIRECTION_CLOCKWISE); + } + break; + + case EMR_SETBKCOLOR : + { + SetBkColor( ReadColor() ); + } + break; + + case EMR_OFFSETCLIPRGN : + { + mpInputStream->ReadInt32( nX32 ).ReadInt32( nY32 ); + SAL_INFO("emfio", "\t\tPoint: (" << nX32 << ", " << nY32 << ")"); + MoveClipRegion( Size( nX32, nY32 ) ); + } + break; + + case EMR_MOVETOEX : + { + mpInputStream->ReadInt32( nX32 ).ReadInt32( nY32 ); + SAL_INFO("emfio", "\t\tPoint: (" << nX32 << ", " << nY32 << ")"); + MoveTo( Point( nX32, nY32 ), mbRecordPath); + } + break; + + case EMR_INTERSECTCLIPRECT : + { + mpInputStream->ReadInt32( nX32 ).ReadInt32( nY32 ).ReadInt32( nx32 ).ReadInt32( ny32 ); + IntersectClipRect( ReadRectangle( nX32, nY32, nx32, ny32 ) ); + SAL_INFO("emfio", "\t\tPoint: (" << nX32 << ", " << nY32 << ")"); + SAL_INFO("emfio", "\t\tPoint: (" << nx32 << ", " << ny32 << ")"); + } + break; + + case EMR_SAVEDC : + { + Push(); + } + break; + + case EMR_RESTOREDC : + { + sal_Int32 nSavedDC(0); + mpInputStream->ReadInt32( nSavedDC ); + SAL_INFO( "emfio", "\t\t SavedDC Index: " << nSavedDC ); + if ( nSavedDC < 0 ) + Pop( nSavedDC ); + else + Pop( -1 ); // For RestoreDC values above -1, treat as get last element + } + break; + + case EMR_SETWORLDTRANSFORM : + { + XForm aTempXForm; + *mpInputStream >> aTempXForm; + SetWorldTransform( aTempXForm ); + } + break; + + case EMR_MODIFYWORLDTRANSFORM : + { + sal_uInt32 nMode(0); + XForm aTempXForm; + *mpInputStream >> aTempXForm; + mpInputStream->ReadUInt32( nMode ); + ModifyWorldTransform( aTempXForm, static_cast<ModifyWorldTransformMode>(nMode) ); + } + break; + + case EMR_SELECTOBJECT : + { + mpInputStream->ReadUInt32( nIndex ); + SelectObject( nIndex ); + } + break; + + case EMR_CREATEPEN: + { + mpInputStream->ReadUInt32(nIndex); + if ((nIndex & ENHMETA_STOCK_OBJECT) == 0) + { + sal_uInt32 nStyle(0); + sal_Int32 nPenWidth(0), nIgnored; + mpInputStream->ReadUInt32(nStyle).ReadInt32(nPenWidth).ReadInt32(nIgnored); + SAL_INFO("emfio", "\t\tIndex: " << nIndex << " Style: 0x" << std::hex + << nStyle << std::dec + << " PenWidth: " << nPenWidth); + CreateObjectIndexed(nIndex, std::make_unique<WinMtfLineStyle>(ReadColor(), nStyle, nPenWidth)); + } + } + break; + + case EMR_EXTCREATEPEN: + { + mpInputStream->ReadUInt32(nIndex); + if ((nIndex & ENHMETA_STOCK_OBJECT) == 0) + { + sal_uInt32 offBmi, cbBmi, offBits, cbBits, nStyle, nWidth, nBrushStyle, elpNumEntries; + sal_Int32 elpHatch; + mpInputStream->ReadUInt32(offBmi).ReadUInt32(cbBmi).ReadUInt32(offBits).ReadUInt32(cbBits); + mpInputStream->ReadUInt32(nStyle).ReadUInt32(nWidth).ReadUInt32(nBrushStyle); + + SAL_INFO("emfio", "\t\tStyle: 0x" << std::hex << nStyle << std::dec); + SAL_INFO("emfio", "\t\tWidth: " << nWidth); + Color aColorRef = ReadColor(); + mpInputStream->ReadInt32(elpHatch).ReadUInt32(elpNumEntries); + + if (!mpInputStream->good()) + bStatus = false; + else + CreateObjectIndexed(nIndex, std::make_unique<WinMtfLineStyle>(aColorRef, nStyle, nWidth)); + } + } + break; + + case EMR_CREATEBRUSHINDIRECT : + { + mpInputStream->ReadUInt32( nIndex ); + if ( ( nIndex & ENHMETA_STOCK_OBJECT ) == 0 ) + { + sal_uInt32 nStyle; + mpInputStream->ReadUInt32( nStyle ); + BrushStyle eStyle = static_cast<BrushStyle>(nStyle); + CreateObjectIndexed(nIndex, std::make_unique<WinMtfFillStyle>( ReadColor(), ( eStyle == BrushStyle::BS_HOLLOW ) )); + } + } + break; + + case EMR_DELETEOBJECT : + { + mpInputStream->ReadUInt32( nIndex ); + if ( ( nIndex & ENHMETA_STOCK_OBJECT ) == 0 ) + DeleteObject( nIndex ); + } + break; + + case EMR_ELLIPSE : + { + mpInputStream->ReadInt32( nX32 ).ReadInt32( nY32 ).ReadInt32( nx32 ).ReadInt32( ny32 ); + SAL_INFO("emfio", "\t\t Rectangle, left: " << nX32 << ", top: " << nY32 << ", right: " << nx32 << ", bottom: " << ny32); + + sal_Int32 w(0), h(0); + if (o3tl::checked_sub(nx32, nX32, w) || o3tl::checked_sub(ny32, nY32, h)) + SAL_WARN("emfio", "broken ellipse"); + else + { + tools::Long dw = w / 2; + tools::Long dh = h / 2; + Point aCenter( nX32 + dw, nY32 + dh ); + tools::Polygon aPoly( aCenter, dw, dh ); + DrawPolygon( std::move(aPoly), mbRecordPath ); + } + } + break; + + case EMR_RECTANGLE : + { + mpInputStream->ReadInt32( nX32 ).ReadInt32( nY32 ).ReadInt32( nx32 ).ReadInt32( ny32 ); + SAL_INFO("emfio", "\t\t Rectangle, left: " << nX32 << ", top: " << nY32 << ", right: " << nx32 << ", bottom: " << ny32); + Point aPoints[] { Point(nX32, nY32), + Point(nx32, nY32), + Point(nx32, ny32), + Point(nX32, ny32) }; + tools::Polygon aPoly(4, aPoints); + aPoly.Optimize( PolyOptimizeFlags::CLOSE ); + DrawPolygon( std::move(aPoly), mbRecordPath ); + } + break; + + case EMR_ROUNDRECT : + { + mpInputStream->ReadInt32( nX32 ).ReadInt32( nY32 ).ReadInt32( nx32 ).ReadInt32( ny32 ).ReadUInt32( nW ).ReadUInt32( nH ); + tools::Polygon aRoundRectPoly( ReadRectangle( nX32, nY32, nx32, ny32 ), nW, nH ); + DrawPolygon( std::move(aRoundRectPoly), mbRecordPath ); + } + break; + + case EMR_ARC : + case EMR_ARCTO : + case EMR_CHORD : + { + sal_Int32 nStartX, nStartY, nEndX, nEndY; + mpInputStream->ReadInt32( nX32 ).ReadInt32( nY32 ).ReadInt32( nx32 ).ReadInt32( ny32 ).ReadInt32( nStartX ).ReadInt32( nStartY ).ReadInt32( nEndX ).ReadInt32( nEndY ); + if (!mpInputStream->good()) + bStatus = false; + else + { + SAL_INFO( "emfio", "\t\t Bounds: " << nX32 << ":" << nY32 << ", " << nx32 << ":" << ny32 << ", Start: " << nStartX << ":" << nStartY << ", End: " << nEndX << ":" << nEndY ); + tools::Polygon aPoly(ReadRectangle(nX32, nY32, nx32, ny32), Point(nStartX, nStartY), Point(nEndX, nEndY), PolyStyle::Arc, IsArcDirectionClockWise()); + + if ( nRecType == EMR_CHORD ) + DrawPolygon( std::move(aPoly), mbRecordPath ); + else + DrawPolyLine( std::move(aPoly), nRecType == EMR_ARCTO, mbRecordPath ); + } + } + break; + + case EMR_PIE : + { + sal_Int32 nStartX, nStartY, nEndX, nEndY; + mpInputStream->ReadInt32( nX32 ).ReadInt32( nY32 ).ReadInt32( nx32 ).ReadInt32( ny32 ).ReadInt32( nStartX ).ReadInt32( nStartY ).ReadInt32( nEndX ).ReadInt32( nEndY ); + if (!mpInputStream->good()) + bStatus = false; + else + { + tools::Polygon aPoly(ReadRectangle(nX32, nY32, nx32, ny32), Point(nStartX, nStartY), Point(nEndX, nEndY), PolyStyle::Pie, IsArcDirectionClockWise()); + DrawPolygon( std::move(aPoly), mbRecordPath ); + } + } + break; + + case EMR_LINETO : + { + mpInputStream->ReadInt32( nX32 ).ReadInt32( nY32 ); + LineTo( Point( nX32, nY32 ), mbRecordPath); + } + break; + + case EMR_BEGINPATH : + { + ClearPath(); + mbRecordPath = true; + } + break; + + case EMR_ABORTPATH : + ClearPath(); + [[fallthrough]]; + case EMR_ENDPATH : + mbRecordPath = false; + break; + + case EMR_CLOSEFIGURE : + ClosePath(); + break; + + case EMR_FILLPATH : + StrokeAndFillPath( false, true ); + break; + + case EMR_STROKEANDFILLPATH : + StrokeAndFillPath( true, true ); + break; + + case EMR_STROKEPATH : + StrokeAndFillPath( true, false ); + break; + + case EMR_SELECTCLIPPATH : + { + sal_Int32 nClippingMode(0); + mpInputStream->ReadInt32(nClippingMode); + SetClipPath(GetPathObj(), static_cast<RegionMode>(nClippingMode), true); + } + break; + + case EMR_EXTSELECTCLIPRGN : + { + sal_uInt32 nRemainingRecSize = nRecSize - 8; + if (nRemainingRecSize < 8) + bStatus = false; + else + { + sal_Int32 nClippingMode(0), cbRgnData(0); + mpInputStream->ReadInt32(cbRgnData); + mpInputStream->ReadInt32(nClippingMode); + nRemainingRecSize -= 8; + + // This record's region data should be ignored if mode + // is RGN_COPY - see EMF spec section 2.3.2.2 + if (static_cast<RegionMode>(nClippingMode) == RegionMode::RGN_COPY) + { + SetDefaultClipPath(); + } + else + { + basegfx::B2DPolyPolygon aPolyPoly; + if (cbRgnData) + ImplReadRegion(aPolyPoly, *mpInputStream, nRemainingRecSize); + const tools::PolyPolygon aPolyPolygon(aPolyPoly); + SetClipPath(aPolyPolygon, static_cast<RegionMode>(nClippingMode), false); + } + } + } + break; + + case EMR_ALPHABLEND: + { + sal_Int32 xDest(0), yDest(0), cxDest(0), cyDest(0); + + BLENDFUNCTION aFunc; + sal_Int32 xSrc(0), ySrc(0), cxSrc(0), cySrc(0); + XForm xformSrc; + sal_uInt32 BkColorSrc(0), iUsageSrc(0), offBmiSrc(0); + sal_uInt32 cbBmiSrc(0), offBitsSrc(0), cbBitsSrc(0); + + sal_uInt32 nStart = mpInputStream->Tell() - 8; + mpInputStream->SeekRel( 0x10 ); + + mpInputStream->ReadInt32( xDest ).ReadInt32( yDest ).ReadInt32( cxDest ).ReadInt32( cyDest ); + *mpInputStream >> aFunc; + mpInputStream->ReadInt32( xSrc ).ReadInt32( ySrc ); + *mpInputStream >> xformSrc; + mpInputStream->ReadUInt32( BkColorSrc ).ReadUInt32( iUsageSrc ).ReadUInt32( offBmiSrc ).ReadUInt32( cbBmiSrc ) + .ReadUInt32( offBitsSrc ).ReadUInt32( cbBitsSrc ).ReadInt32( cxSrc ).ReadInt32( cySrc ) ; + + if ( !mpInputStream->good() || + (cbBitsSrc > (SAL_MAX_UINT32 - 14)) || + ((SAL_MAX_UINT32 - 14) - cbBitsSrc < cbBmiSrc) || + cxDest == SAL_MAX_INT32 || cyDest == SAL_MAX_INT32 ) + { + bStatus = false; + } + else + { + tools::Rectangle aRect(Point(xDest, yDest), Size(cxDest + 1, cyDest + 1)); + + const sal_uInt32 nSourceSize = cbBmiSrc + cbBitsSrc + 14; + bool bSafeRead = nSourceSize <= (mnEndPos - mnStartPos); + sal_uInt32 nDeltaToDIB5HeaderSize(0); + const bool bReadAlpha(0x01 == aFunc.aAlphaFormat); + if (bSafeRead && bReadAlpha) + { + // we need to read alpha channel data if AlphaFormat of BLENDFUNCTION is + // AC_SRC_ALPHA (==0x01). To read it, create a temp DIB-File which is ready + // for DIB-5 format + const sal_uInt32 nHeaderSize = getDIBV5HeaderSize(); + if (cbBmiSrc > nHeaderSize) + bSafeRead = false; + else + nDeltaToDIB5HeaderSize = nHeaderSize - cbBmiSrc; + } + if (bSafeRead) + { + const sal_uInt32 nTargetSize(cbBmiSrc + nDeltaToDIB5HeaderSize + cbBitsSrc + 14); + char* pBuf = new char[ nTargetSize ]; + SvMemoryStream aTmp( pBuf, nTargetSize, StreamMode::READ | StreamMode::WRITE ); + + aTmp.ObjectOwnsMemory( true ); + + // write BM-Header (14 bytes) + aTmp.WriteUChar( 'B' ) + .WriteUChar( 'M' ) + .WriteUInt32( cbBitsSrc ) + .WriteUInt16( 0 ) + .WriteUInt16( 0 ) + .WriteUInt32( cbBmiSrc + nDeltaToDIB5HeaderSize + 14 ); + + // copy DIBInfoHeader from source (cbBmiSrc bytes) + mpInputStream->Seek( nStart + offBmiSrc ); + char* pWritePos = pBuf + 14; + auto nRead = mpInputStream->ReadBytes(pWritePos, cbBmiSrc); + if (nRead != cbBmiSrc) + { + // zero remainder if short read + memset(pWritePos + nRead, 0, cbBmiSrc - nRead); + } + + if (bReadAlpha) + { + // need to add values for all stuff that DIBV5Header is bigger + // than DIBInfoHeader, all values are correctly initialized to zero, + // so we can use memset here + memset(pBuf + cbBmiSrc + 14, 0, nDeltaToDIB5HeaderSize); + } + + // copy bitmap data from source (offBitsSrc bytes) + mpInputStream->Seek( nStart + offBitsSrc ); + pWritePos = pBuf + 14 + nDeltaToDIB5HeaderSize + cbBmiSrc; + nRead = mpInputStream->ReadBytes(pWritePos, cbBitsSrc); + if (nRead != cbBitsSrc) + { + // zero remainder if short read + memset(pWritePos + nRead, 0, cbBitsSrc - nRead); + } + + aTmp.Seek( 0 ); + + // prepare to read and fill BitmapEx + BitmapEx aBitmapEx; + + if(bReadAlpha) + { + Bitmap aBitmap; + AlphaMask aAlpha; + + if(ReadDIBV5(aBitmap, aAlpha, aTmp)) + { + aBitmapEx = BitmapEx(aBitmap, aAlpha); + } + } + else + { + Bitmap aBitmap; + + if(ReadDIB(aBitmap, aTmp, true)) + { + if(0xff != aFunc.aSrcConstantAlpha) + { + // add const alpha channel + aBitmapEx = BitmapEx( + aBitmap, + AlphaMask(aBitmap.GetSizePixel(), &aFunc.aSrcConstantAlpha)); + } + else + { + // just use Bitmap + aBitmapEx = BitmapEx(aBitmap); + } + } + } + + if(!aBitmapEx.IsEmpty()) + { + // test if it is sensible to crop + if (cxSrc > 0 && cySrc > 0 && xSrc >= 0 && ySrc >= 0) + { + sal_Int32 xEndSrc; + sal_Int32 yEndSrc; + if (!o3tl::checked_add(xSrc, cxSrc, xEndSrc) && xEndSrc < aBitmapEx.GetSizePixel().Width() && + !o3tl::checked_add(ySrc, cySrc, yEndSrc) && yEndSrc < aBitmapEx.GetSizePixel().Height()) + { + const tools::Rectangle aCropRect( Point( xSrc, ySrc ), Size( cxSrc, cySrc ) ); + aBitmapEx.Crop( aCropRect ); + } + } + + #ifdef DBG_UTIL + static bool bDoSaveForVisualControl(false); // loplugin:constvars:ignore + + if(bDoSaveForVisualControl) + { + SvFileStream aNew("c:\\metafile_content.png", StreamMode::WRITE|StreamMode::TRUNC); + vcl::PNGWriter aPNGWriter(aBitmapEx); + aPNGWriter.Write(aNew); + } + #endif + maBmpSaveList.emplace_back(aBitmapEx, aRect, SRCAND|SRCINVERT); + } + } + } + } + break; + + case EMR_BITBLT : // PASSTHROUGH INTENDED + case EMR_STRETCHBLT : + { + sal_Int32 xDest, yDest, cxDest, cyDest, xSrc, ySrc, cxSrc, cySrc; + sal_uInt32 dwRop, iUsageSrc, offBmiSrc, cbBmiSrc, offBitsSrc, cbBitsSrc; + XForm xformSrc; + + sal_uInt32 nStart = mpInputStream->Tell() - 8; + + mpInputStream->SeekRel( 0x10 ); + mpInputStream->ReadInt32( xDest ).ReadInt32( yDest ).ReadInt32( cxDest ).ReadInt32( cyDest ).ReadUInt32( dwRop ).ReadInt32( xSrc ).ReadInt32( ySrc ) + >> xformSrc; + mpInputStream->ReadUInt32( nColor ).ReadUInt32( iUsageSrc ).ReadUInt32( offBmiSrc ).ReadUInt32( cbBmiSrc ) + .ReadUInt32( offBitsSrc ).ReadUInt32( cbBitsSrc ); + + if ( nRecType == EMR_STRETCHBLT ) + mpInputStream->ReadInt32( cxSrc ).ReadInt32( cySrc ); + else + cxSrc = cySrc = 0; + + if (!mpInputStream->good() || (cbBitsSrc > (SAL_MAX_UINT32 - 14)) || ((SAL_MAX_UINT32 - 14) - cbBitsSrc < cbBmiSrc)) + bStatus = false; + else + { + Bitmap aBitmap; + tools::Rectangle aRect(Point(xDest, yDest), Size(cxDest, cyDest)); + + sal_uInt32 nSize = cbBmiSrc + cbBitsSrc + 14; + if ( nSize <= ( mnEndPos - mnStartPos ) ) + { + char* pBuf = new char[ nSize ]; + SvMemoryStream aTmp( pBuf, nSize, StreamMode::READ | StreamMode::WRITE ); + aTmp.ObjectOwnsMemory( true ); + aTmp.WriteUChar( 'B' ) + .WriteUChar( 'M' ) + .WriteUInt32( cbBitsSrc ) + .WriteUInt16( 0 ) + .WriteUInt16( 0 ) + .WriteUInt32( cbBmiSrc + 14 ); + + mpInputStream->Seek( nStart + offBmiSrc ); + char* pWritePos = pBuf + 14; + auto nRead = mpInputStream->ReadBytes(pWritePos, cbBmiSrc); + if (nRead != cbBmiSrc) + { + // zero remainder if short read + memset(pWritePos + nRead, 0, cbBmiSrc - nRead); + } + + mpInputStream->Seek( nStart + offBitsSrc ); + pWritePos = pBuf + 14 + cbBmiSrc; + nRead = mpInputStream->ReadBytes(pWritePos, cbBitsSrc); + if (nRead != cbBitsSrc) + { + // zero remainder if short read + memset(pWritePos + nRead, 0, cbBitsSrc - nRead); + } + + aTmp.Seek( 0 ); + ReadDIB(aBitmap, aTmp, true); + + // test if it is sensible to crop + if ( (cxSrc > 0) && (cySrc > 0) && + (xSrc >= 0) && (ySrc >= 0) && + (aBitmap.GetSizePixel().Width() >= cxSrc) && + (xSrc <= aBitmap.GetSizePixel().Width() - cxSrc) && + (aBitmap.GetSizePixel().Height() >= cySrc) && + (ySrc <= aBitmap.GetSizePixel().Height() - cySrc) ) + { + tools::Rectangle aCropRect( Point( xSrc, ySrc ), Size( cxSrc, cySrc ) ); + aBitmap.Crop( aCropRect ); + } + + maBmpSaveList.emplace_back(aBitmap, aRect, dwRop); + } + } + } + break; + + case EMR_STRETCHDIBITS : + { + sal_Int32 xDest, yDest, xSrc, ySrc, cxSrc, cySrc, cxDest, cyDest; + sal_uInt32 offBmiSrc, cbBmiSrc, offBitsSrc, cbBitsSrc, iUsageSrc, dwRop; + sal_uInt32 nStart = mpInputStream->Tell() - 8; + + mpInputStream->SeekRel( 0x10 ); + mpInputStream->ReadInt32( xDest ) + .ReadInt32( yDest ) + .ReadInt32( xSrc ) + .ReadInt32( ySrc ) + .ReadInt32( cxSrc ) + .ReadInt32( cySrc ) + .ReadUInt32( offBmiSrc ) + .ReadUInt32( cbBmiSrc ) + .ReadUInt32( offBitsSrc ) + .ReadUInt32( cbBitsSrc ) + .ReadUInt32( iUsageSrc ) + .ReadUInt32( dwRop ) + .ReadInt32( cxDest ) + .ReadInt32( cyDest ); + + if (!mpInputStream->good() || + ((SAL_MAX_UINT32 - 14) < cbBitsSrc) || + ((SAL_MAX_UINT32 - 14) - cbBitsSrc < cbBmiSrc)) + { + bStatus = false; + } + else + { + Bitmap aBitmap; + tools::Rectangle aRect(xDest, yDest); + aRect.SaturatingSetSize(Size(cxDest, cyDest)); + + sal_uInt32 nSize = cbBmiSrc + cbBitsSrc + 14; + if ( nSize <= ( mnEndPos - mnStartPos ) ) + { + char* pBuf = new char[ nSize ]; + SvMemoryStream aTmp( pBuf, nSize, StreamMode::READ | StreamMode::WRITE ); + aTmp.ObjectOwnsMemory( true ); + aTmp.WriteUChar( 'B' ) + .WriteUChar( 'M' ) + .WriteUInt32( cbBitsSrc ) + .WriteUInt16( 0 ) + .WriteUInt16( 0 ) + .WriteUInt32( cbBmiSrc + 14 ); + + mpInputStream->Seek( nStart + offBmiSrc ); + char* pWritePos = pBuf + 14; + auto nRead = mpInputStream->ReadBytes(pWritePos, cbBmiSrc); + if (nRead != cbBmiSrc) + { + // zero remainder if short read + memset(pWritePos + nRead, 0, cbBmiSrc - nRead); + } + + mpInputStream->Seek( nStart + offBitsSrc ); + pWritePos = pBuf + 14 + cbBmiSrc; + nRead = mpInputStream->ReadBytes(pWritePos, cbBitsSrc); + if (nRead != cbBitsSrc) + { + // zero remainder if short read + memset(pWritePos + nRead, 0, cbBitsSrc - nRead); + } + + aTmp.Seek( 0 ); + ReadDIB(aBitmap, aTmp, true); + + const tools::Long nWidthDiff = aBitmap.GetSizePixel().Width() - cxSrc; + const tools::Long nHeightDiff = aBitmap.GetSizePixel().Height() - cySrc; + + // test if it is sensible to crop + if ( (cxSrc > 0) && (cySrc > 0) && + (xSrc >= 0) && (ySrc >= 0) && + (xSrc <= nWidthDiff) && (ySrc <= nHeightDiff) ) + { + tools::Rectangle aCropRect( Point( xSrc, ySrc ), Size( cxSrc, cySrc ) ); + aBitmap.Crop( aCropRect ); + } + maBmpSaveList.emplace_back(aBitmap, aRect, dwRop); + } + } + } + break; + + case EMR_EXTCREATEFONTINDIRECTW : + { + mpInputStream->ReadUInt32( nIndex ); + if ( ( nIndex & ENHMETA_STOCK_OBJECT ) == 0 ) + { + LOGFONTW aLogFont; + mpInputStream->ReadInt32( aLogFont.lfHeight ) + .ReadInt32( aLogFont.lfWidth ) + .ReadInt32( aLogFont.lfEscapement ) + .ReadInt32( aLogFont.lfOrientation ) + .ReadInt32( aLogFont.lfWeight ) + .ReadUChar( aLogFont.lfItalic ) + .ReadUChar( aLogFont.lfUnderline ) + .ReadUChar( aLogFont.lfStrikeOut ) + .ReadUChar( aLogFont.lfCharSet ) + .ReadUChar( aLogFont.lfOutPrecision ) + .ReadUChar( aLogFont.lfClipPrecision ) + .ReadUChar( aLogFont.lfQuality ) + .ReadUChar( aLogFont.lfPitchAndFamily ); + + sal_Unicode lfFaceName[LF_FACESIZE+1]; + lfFaceName[LF_FACESIZE] = 0; + for (int i = 0; i < LF_FACESIZE; ++i) + { + sal_uInt16 nChar(0); + mpInputStream->ReadUInt16(nChar); + lfFaceName[i] = nChar; + } + aLogFont.alfFaceName = OUString( lfFaceName ); + + // #i123216# Not used in the test case of #121382# (always identity in XForm), also + // no hints in ms docu if FontSize should be scaled with WT. Using with the example + // from #i123216# creates errors, so removing. + + // // #i121382# Need to apply WorldTransform to FontHeight/Width; this should be completely + // // changed to basegfx::B2DHomMatrix instead of 'struct XForm', but not now due to time + // // constraints and dangers + // const XForm& rXF = GetWorldTransform(); + // const basegfx::B2DHomMatrix aWT(rXF.eM11, rXF.eM21, rXF.eDx, rXF.eM12, rXF.eM22, rXF.eDy); + // const basegfx::B2DVector aTransVec(aWT * basegfx::B2DVector(aLogFont.lfWidth, aLogFont.lfHeight)); + // aLogFont.lfWidth = aTransVec.getX(); + // aLogFont.lfHeight = aTransVec.getY(); + if (mpInputStream->good() && aLogFont.lfHeight != SAL_MIN_INT32 && aLogFont.lfWidth != SAL_MIN_INT32) + { + CreateObjectIndexed(nIndex, std::make_unique<WinMtfFontStyle>( aLogFont )); + } + } + } + break; + + case EMR_POLYTEXTOUTA : + case EMR_EXTTEXTOUTA : + bFlag = true; + [[fallthrough]]; + case EMR_POLYTEXTOUTW : + case EMR_EXTTEXTOUTW : + { + sal_Int32 nLeft, nTop, nRight, nBottom; + sal_uInt32 nGfxMode; + float nXScale, nYScale; + sal_uInt32 ncStrings( 1 ); + sal_Int32 ptlReferenceX, ptlReferenceY; + sal_uInt32 nLen, nOffString, nOptions, offDx; + sal_Int32 nLeftRect, nTopRect, nRightRect, nBottomRect; + + nCurPos = mpInputStream->Tell() - 8; + + mpInputStream->ReadInt32( nLeft ).ReadInt32( nTop ).ReadInt32( nRight ).ReadInt32( nBottom ) + .ReadUInt32( nGfxMode ).ReadFloat( nXScale ).ReadFloat( nYScale ); + SAL_INFO("emfio", "\t\tBounds: " << nLeft << ", " << nTop << ", " << nRight << ", " << nBottom); + SAL_INFO("emfio", "\t\tiGraphicsMode: 0x" << std::hex << nGfxMode << std::dec); + SAL_INFO("emfio", "\t\t Scale: " << nXScale << " x " << nYScale); + if ( ( nRecType == EMR_POLYTEXTOUTA ) || ( nRecType == EMR_POLYTEXTOUTW ) ) + { + mpInputStream->ReadUInt32( ncStrings ); + SAL_INFO("emfio", "\t\t Number of Text objects: " << ncStrings); + if ( ncStrings == 0 ) + break; + } + mpInputStream->ReadInt32( ptlReferenceX ).ReadInt32( ptlReferenceY ).ReadUInt32( nLen ).ReadUInt32( nOffString ).ReadUInt32( nOptions ); + SAL_INFO("emfio", "\t\tReference: (" << ptlReferenceX << ", " << ptlReferenceY << ")"); + + mpInputStream->ReadInt32( nLeftRect ).ReadInt32( nTopRect ).ReadInt32( nRightRect ).ReadInt32( nBottomRect ); + mpInputStream->ReadUInt32( offDx ); + + if (!mpInputStream->good()) + bStatus = false; + else + { + const tools::Rectangle aRect( nLeftRect, nTopRect, nRightRect, nBottomRect ); + const BackgroundMode mnBkModeBackup = mnBkMode; + if ( nOptions & ETO_NO_RECT ) // Don't draw the background rectangle and text background + mnBkMode = BackgroundMode::Transparent; + else if ( nOptions & ETO_OPAQUE ) + DrawRectWithBGColor( aRect ); + + // ETO_RTLREADING indicates that the characters are laid from right to left + vcl::text::ComplexTextLayoutFlags nTextLayoutMode = vcl::text::ComplexTextLayoutFlags::Default; + if ( nOptions & ETO_RTLREADING ) + nTextLayoutMode = vcl::text::ComplexTextLayoutFlags::BiDiRtl | vcl::text::ComplexTextLayoutFlags::TextOriginLeft; + SetTextLayoutMode( nTextLayoutMode ); + SAL_WARN_IF( ( nOptions & ( ETO_PDY | ETO_GLYPH_INDEX ) ) != 0, "emfio", "SJ: ETO_PDY || ETO_GLYPH_INDEX in EMF" ); + + Point aPos( ptlReferenceX, ptlReferenceY ); + bool bOffStringSane = nOffString <= mnEndPos - nCurPos; + if ( bOffStringSane ) + { + mpInputStream->Seek( nCurPos + nOffString ); + OUString aText; + if ( bFlag ) + { + if ( nLen <= ( mnEndPos - mpInputStream->Tell() ) ) + { + std::vector<char> pBuf( nLen ); + mpInputStream->ReadBytes(pBuf.data(), nLen); + aText = OUString(pBuf.data(), nLen, GetCharSet()); + } + } + else + { + if ( ( nLen * sizeof(sal_Unicode) ) <= ( mnEndPos - mpInputStream->Tell() ) ) + { + aText = read_uInt16s_ToOUString(*mpInputStream, nLen); + } + } + + SAL_INFO("emfio", "\t\tText: " << aText); + SAL_INFO("emfio", "\t\tDxBuffer:"); + + std::vector<sal_Int32> aDXAry; + std::unique_ptr<tools::Long[]> pDYAry; + + sal_Int32 nDxSize; + sal_Int32 nBytesEach; + + // Reading OutputDx + // ETO_PDY flag indicates that we should read twice values + // compared to the number of characters in the output string. + // Values are stored in an array of 32-bit unsigned integers + // named OutputDx, so there will be either 8 bytes or 4 bytes + // each depending on ETO_PDY is set or not. + if (nOptions & ETO_PDY) + nBytesEach = 8; + else + nBytesEach = 4; + + bool bOverflow = o3tl::checked_multiply<sal_Int32>(nLen, nBytesEach, nDxSize); + if (!bOverflow && offDx && ((nCurPos + offDx + nDxSize) <= nNextPos ) && nNextPos <= mnEndPos) + { + mpInputStream->Seek( nCurPos + offDx ); + aDXAry.resize(aText.getLength()); + if (nOptions & ETO_PDY) + { + pDYAry.reset( new tools::Long[aText.getLength()] ); + } + + for (sal_Int32 i = 0; i < aText.getLength(); ++i) + { + sal_Int32 nDxCount = 1; + if ( static_cast<sal_uInt32>( aText.getLength() ) != nLen ) + { + sal_Unicode cUniChar = aText[i]; + OString aTmp(&cUniChar, 1, GetCharSet()); + if (aTmp.getLength() > 1) + { + nDxCount = aTmp.getLength(); + } + } + + aDXAry[i] = 0; + if (nOptions & ETO_PDY) + { + pDYAry[i] = 0; + } + + while (nDxCount--) + { + sal_Int32 nDxTmp = 0; + mpInputStream->ReadInt32(nDxTmp); + aDXAry[i] = o3tl::saturating_add(aDXAry[i], nDxTmp); + if (nOptions & ETO_PDY) + { + sal_Int32 nDyTmp = 0; + mpInputStream->ReadInt32(nDyTmp); + pDYAry[i] += nDyTmp; + } + } + + SAL_INFO("emfio", "\t\t\tSpacing " << i << ": " << aDXAry[i]); + } + } + if ( nOptions & ETO_CLIPPED ) + { + Push(); // Save the current clip. It will be restored after text drawing + IntersectClipRect( aRect ); + } + DrawText(aPos, aText, aDXAry.empty() ? nullptr : &aDXAry, pDYAry.get(), mbRecordPath, static_cast<GraphicsMode>(nGfxMode)); + if ( nOptions & ETO_CLIPPED ) + Pop(); + } + mnBkMode = mnBkModeBackup; + } + } + break; + + case EMR_POLYBEZIERTO16 : + DrawPolyBezier(ReadPolygonWithSkip<sal_Int16>(true, nNextPos), true, mbRecordPath); + break; + + case EMR_POLYBEZIER16 : + DrawPolyBezier(ReadPolygonWithSkip<sal_Int16>(false, nNextPos), false, mbRecordPath); + break; + + case EMR_POLYGON16 : + DrawPolygon(ReadPolygonWithSkip<sal_Int16>(false, nNextPos), mbRecordPath); + break; + + case EMR_POLYLINETO16 : + DrawPolyLine(ReadPolygonWithSkip<sal_Int16>(true, nNextPos), true, mbRecordPath); + break; + + case EMR_POLYLINE16 : + DrawPolyLine(ReadPolygonWithSkip<sal_Int16>(false, nNextPos), false, mbRecordPath); + break; + + case EMR_POLYPOLYLINE16 : + ReadAndDrawPolyLine<sal_Int16>(nNextPos); + break; + + case EMR_POLYPOLYGON16 : + ReadAndDrawPolyPolygon<sal_Int16>(nNextPos); + break; + + case EMR_FILLRGN : + { + sal_uInt32 nRemainingRecSize = nRecSize - 8; + if (nRemainingRecSize < 24) + bStatus = false; + else + { + sal_uInt32 nRgnDataSize; + basegfx::B2DPolyPolygon aPolyPoly; + mpInputStream->SeekRel(16); // RectL bounds + mpInputStream->ReadUInt32( nRgnDataSize ).ReadUInt32( nIndex ); + nRemainingRecSize -= 24; + + if (ImplReadRegion(aPolyPoly, *mpInputStream, nRemainingRecSize)) + { + Push(); + SelectObject( nIndex ); + tools::PolyPolygon aPolyPolygon(aPolyPoly); + DrawPolyPolygon( aPolyPolygon ); + Pop(); + } + } + } + break; + + case EMR_PAINTRGN : + { + sal_uInt32 nRemainingRecSize = nRecSize - 8; + if (nRemainingRecSize < 20) + bStatus = false; + else + { + sal_uInt32 nRgnDataSize; + basegfx::B2DPolyPolygon aPolyPoly; + mpInputStream->SeekRel(16); // Skipping RectL bounds + mpInputStream->ReadUInt32( nRgnDataSize ); + nRemainingRecSize -= 20; + + if (ImplReadRegion(aPolyPoly, *mpInputStream, nRemainingRecSize)) + { + tools::PolyPolygon aPolyPolygon(aPolyPoly); + DrawPolyPolygon( aPolyPolygon ); + } + } + } + break; + + case EMR_CREATEDIBPATTERNBRUSHPT : + { + sal_uInt32 nStart = mpInputStream->Tell() - 8; + Bitmap aBitmap; + + mpInputStream->ReadUInt32( nIndex ); + + if ( ( nIndex & ENHMETA_STOCK_OBJECT ) == 0 ) + { + sal_uInt32 usage, offBmi, cbBmi, offBits, cbBits; + + mpInputStream->ReadUInt32( usage ); + mpInputStream->ReadUInt32( offBmi ); + mpInputStream->ReadUInt32( cbBmi ); + mpInputStream->ReadUInt32( offBits ); + mpInputStream->ReadUInt32( cbBits ); + + if ( !mpInputStream->good() || (cbBits > (SAL_MAX_UINT32 - 14)) || ((SAL_MAX_UINT32 - 14) - cbBits < cbBmi) ) + bStatus = false; + else if ( offBmi ) + { + sal_uInt32 nSize = cbBmi + cbBits + 14; + if ( nSize <= ( mnEndPos - mnStartPos ) ) + { + char* pBuf = new char[ nSize ]; + + SvMemoryStream aTmp( pBuf, nSize, StreamMode::READ | StreamMode::WRITE ); + aTmp.ObjectOwnsMemory( true ); + aTmp.WriteUChar( 'B' ) + .WriteUChar( 'M' ) + .WriteUInt32( cbBits ) + .WriteUInt16( 0 ) + .WriteUInt16( 0 ) + .WriteUInt32( cbBmi + 14 ); + + mpInputStream->Seek( nStart + offBmi ); + char* pWritePos = pBuf + 14; + auto nRead = mpInputStream->ReadBytes(pWritePos, cbBmi); + if (nRead != cbBmi) + { + // zero remainder if short read + memset(pWritePos + nRead, 0, cbBmi - nRead); + } + + mpInputStream->Seek( nStart + offBits ); + pWritePos = pBuf + 14 + cbBmi; + nRead = mpInputStream->ReadBytes(pWritePos, cbBits); + if (nRead != cbBits) + { + // zero remainder if short read + memset(pWritePos + nRead, 0, cbBits - nRead); + } + + aTmp.Seek( 0 ); + ReadDIB(aBitmap, aTmp, true); + } + } + } + + CreateObjectIndexed(nIndex, std::make_unique<WinMtfFillStyle>( aBitmap )); + } + break; + + case EMR_MASKBLT : + case EMR_PLGBLT : + case EMR_SETDIBITSTODEVICE : + case EMR_FRAMERGN : + case EMR_INVERTRGN : + case EMR_FLATTENPATH : + case EMR_WIDENPATH : + case EMR_POLYDRAW : + case EMR_SETPALETTEENTRIES : + case EMR_RESIZEPALETTE : + case EMR_EXTFLOODFILL : + case EMR_ANGLEARC : + case EMR_SETCOLORADJUSTMENT : + case EMR_POLYDRAW16 : + case EMR_CREATECOLORSPACE : + case EMR_SETCOLORSPACE : + case EMR_DELETECOLORSPACE : + case EMR_GLSRECORD : + case EMR_GLSBOUNDEDRECORD : + case EMR_PIXELFORMAT : + case EMR_DRAWESCAPE : + case EMR_EXTESCAPE : + case EMR_STARTDOC : + case EMR_SMALLTEXTOUT : + case EMR_FORCEUFIMAPPING : + case EMR_NAMEDESCAPE : + case EMR_COLORCORRECTPALETTE : + case EMR_SETICMPROFILEA : + case EMR_SETICMPROFILEW : + case EMR_TRANSPARENTBLT : + case EMR_TRANSPARENTDIB : + case EMR_GRADIENTFILL : + case EMR_SETLINKEDUFIS : + case EMR_SETMAPPERFLAGS : + case EMR_SETICMMODE : + case EMR_CREATEMONOBRUSH : + case EMR_SETBRUSHORGEX : + case EMR_SETMETARGN : + case EMR_SETMITERLIMIT : + case EMR_EXCLUDECLIPRECT : + case EMR_REALIZEPALETTE : + case EMR_SELECTPALETTE : + case EMR_CREATEPALETTE : + case EMR_ALPHADIBBLEND : + case EMR_SETTEXTJUSTIFICATION : + { + SAL_WARN("emfio", "TODO: EMF record not implemented: " << record_type_name(nRecType)); + } + break; + + case EMR_COMMENT : + case EMR_HEADER : // has already been read at ReadHeader() + break; + + default : SAL_INFO("emfio", "Unknown Meta Action"); break; + } + } + mpInputStream->Seek( nNextPos ); + } + + // tdf#127471 + maScaledFontHelper.applyAlternativeFontScale(); + + if( !maBmpSaveList.empty() ) + ResolveBitmapActions( maBmpSaveList ); + + if ( bStatus ) + mpInputStream->Seek(mnEndPos); + + return bStatus; + }; + + bool EmfReader::ReadHeader() + { + // Spare me the METAFILEHEADER here + // Reading the METAHEADER - EMR_HEADER ([MS-EMF] section 2.3.4.2 EMR_HEADER Record Types) + sal_uInt32 nType(0), nHeaderSize(0); + mpInputStream->ReadUInt32(nType).ReadUInt32(nHeaderSize); + SAL_INFO ("emfio", "0x0-0x" << std::hex << nHeaderSize << " " << record_type_name(nType) << " size: " << std::dec << nHeaderSize); + if (nType != 0x00000001) + { + // per [MS-EMF] 2.3.4.2 EMF Header Record Types, type MUST be 0x00000001 + SAL_WARN("emfio", "EMF header type is not set to 0x00000001 - possibly corrupted file?"); + return false; + } + + // Start reading the EMR_HEADER Header object + + // bound size (RectL object, see [MS-WMF] section 2.2.2.19) + SAL_INFO("emfio", "\tBounding rectangle"); + tools::Rectangle rclBounds = ReadRectangle(); // rectangle in logical units + + // picture frame size (RectL object) + SAL_INFO("emfio", "\tPicture frame"); + tools::Rectangle rclFrame = ReadRectangle(); // rectangle in device units 1/100th mm + + sal_uInt32 nSignature(0); + mpInputStream->ReadUInt32(nSignature); + SAL_INFO("emfio", "\tSignature: 0x" << std::hex << nSignature << std::dec); + + // nSignature MUST be the ASCII characters "FME", see [WS-EMF] 2.2.9 Header Object + // and 2.1.14 FormatSignature Enumeration + if (nSignature != 0x464d4520) + { + SAL_WARN("emfio", "EMF\t\tSignature is not 0x464d4520 (\"FME\") - possibly corrupted file?"); + return false; + } + + sal_uInt32 nVersion(0); + mpInputStream->ReadUInt32(nVersion); // according to [WS-EMF] 2.2.9, this SHOULD be 0x0001000, however + // Microsoft note that not even Windows checks this... + SAL_INFO("emfio", "\tVersion: 0x" << std::hex << nVersion << std::dec); + if (nVersion != 0x00010000) + { + SAL_WARN("emfio", "EMF\t\tThis really should be 0x00010000, though not absolutely essential..."); + } + + mpInputStream->ReadUInt32(mnEndPos); // size of metafile + SAL_INFO("emfio", "\tMetafile size: " << mnEndPos); + mnEndPos += mnStartPos; + + sal_uInt32 nStrmPos = mpInputStream->Tell(); // checking if mnEndPos is valid + sal_uInt32 nActualFileSize = nStrmPos + mpInputStream->remainingSize(); + + if ( nActualFileSize < mnEndPos ) + { + SAL_WARN("emfio", "EMF\t\tEMF Header object records number of bytes as " << mnEndPos + << ", however the file size is actually " << nActualFileSize + << " bytes. Possible file corruption?"); + mnEndPos = nActualFileSize; + } + + mpInputStream->ReadUInt32(mnRecordCount); + SAL_INFO("emfio", "\tRecords: " << mnRecordCount); + + // the number of "handles", or graphics objects used in the metafile + + sal_uInt16 nHandlesCount; + mpInputStream->ReadUInt16(nHandlesCount); + SAL_INFO("emfio", "\tGraphics: " << nHandlesCount); + + // the next 2 bytes are reserved, but according to [MS-EMF] section 2.2.9 + // it MUST be 0x000 and MUST be ignored... the thing is, having such a specific + // value is actually pretty useful in checking if there is possible corruption + + sal_uInt16 nReserved(0); + mpInputStream->ReadUInt16(nReserved); + SAL_INFO("emfio", "\tReserved: 0x" << std::hex << nReserved << std::dec); + + if ( nReserved != 0x0000 ) + { + SAL_WARN("emfio", "EMF\t\tEMF Header object's reserved field is NOT 0x0000... possible " + "corruption?"); + } + + // The next 4 bytes specifies the number of characters in the metafile description. + // The 4 bytes after that specific the offset from this record that contains the + // metafile description... zero means no description string. + // For now, we ignore it. + + mpInputStream->SeekRel(0x8); + + sal_uInt32 nPalEntries(0); + mpInputStream->ReadUInt32(nPalEntries); + SAL_INFO("emfio", "\tPalette entries: " << nPalEntries); + sal_Int32 nPixX(0), nPixY(0), nMillX(0), nMillY(0); + mpInputStream->ReadInt32(nPixX); + mpInputStream->ReadInt32(nPixY); + SAL_INFO("emfio", "\tRef (pixels): " << nPixX << ", " << nPixY); + mpInputStream->ReadInt32(nMillX); + mpInputStream->ReadInt32(nMillY); + SAL_INFO("emfio", "\tRef (mm): " << nMillX << ", " << nMillY); + + SetrclFrame(rclFrame); + SetrclBounds(rclBounds); + SetRefPix(Size( nPixX, nPixY ) ); + SetRefMill(Size( nMillX, nMillY ) ); + + return checkSeek(*mpInputStream, mnStartPos + nHeaderSize); + } + + tools::Rectangle EmfReader::ReadRectangle() + { + sal_Int32 nLeft(0), nTop(0), nRight(0), nBottom(0); + mpInputStream->ReadInt32(nLeft); + mpInputStream->ReadInt32(nTop); + mpInputStream->ReadInt32(nRight); + mpInputStream->ReadInt32(nBottom); + + SAL_INFO("emfio", "\t\tLeft: " << nLeft << ", top: " << nTop << ", right: " << nRight << ", bottom: " << nBottom); + if (nLeft > nRight || nTop > nBottom) + { + SAL_WARN("emfio", "broken rectangle"); + return tools::Rectangle::Justify(Point(nLeft, nTop), Point(nRight, nBottom)); + } + + return tools::Rectangle(nLeft, nTop, nRight, nBottom); + } + + tools::Rectangle EmfReader::ReadRectangle( sal_Int32 x1, sal_Int32 y1, sal_Int32 x2, sal_Int32 y2 ) + { + Point aTL(x1, y1); + Point aBR(o3tl::saturating_add<sal_Int32>(x2, -1), o3tl::saturating_add<sal_Int32>(y2, -1)); + return tools::Rectangle(aTL, aBR); + } +} + +/* vim:set shiftwidth=4 softtabstop=4 expandtab: */ |