diff options
Diffstat (limited to 'filter/source/xslt/common')
| -rw-r--r-- | filter/source/xslt/common/copy.xsl | 26 | ||||
| -rw-r--r-- | filter/source/xslt/common/math.xsl | 580 | ||||
| -rw-r--r-- | filter/source/xslt/common/measure_conversion.xsl | 479 |
3 files changed, 1085 insertions, 0 deletions
diff --git a/filter/source/xslt/common/copy.xsl b/filter/source/xslt/common/copy.xsl new file mode 100644 index 000000000..24fbe007a --- /dev/null +++ b/filter/source/xslt/common/copy.xsl @@ -0,0 +1,26 @@ +<?xml version='1.0' encoding="UTF-8"?> +<!-- + * This file is part of the LibreOffice project. + * + * This Source Code Form is subject to the terms of the Mozilla Public + * License, v. 2.0. If a copy of the MPL was not distributed with this + * file, You can obtain one at http://mozilla.org/MPL/2.0/. + * + * This file incorporates work covered by the following license notice: + * + * Licensed to the Apache Software Foundation (ASF) under one or more + * contributor license agreements. See the NOTICE file distributed + * with this work for additional information regarding copyright + * ownership. The ASF licenses this file to you under the Apache + * License, Version 2.0 (the "License"); you may not use this file + * except in compliance with the License. You may obtain a copy of + * the License at http://www.apache.org/licenses/LICENSE-2.0 . + --> +<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform"> + <xsl:output method="xml" encoding="UTF-8"/> + + <xsl:template match="/"> + <xsl:copy-of select="."/> + </xsl:template> +</xsl:stylesheet> + diff --git a/filter/source/xslt/common/math.xsl b/filter/source/xslt/common/math.xsl new file mode 100644 index 000000000..6b0dafc1f --- /dev/null +++ b/filter/source/xslt/common/math.xsl @@ -0,0 +1,580 @@ +<?xml version="1.0" encoding="UTF-8"?> +<!-- + * This file is part of the LibreOffice project. + * + * This Source Code Form is subject to the terms of the Mozilla Public + * License, v. 2.0. If a copy of the MPL was not distributed with this + * file, You can obtain one at http://mozilla.org/MPL/2.0/. + * + * This file incorporates work covered by the following license notice: + * + * Licensed to the Apache Software Foundation (ASF) under one or more + * contributor license agreements. See the NOTICE file distributed + * with this work for additional information regarding copyright + * ownership. The ASF licenses this file to you under the Apache + * License, Version 2.0 (the "License"); you may not use this file + * except in compliance with the License. You may obtain a copy of + * the License at http://www.apache.org/licenses/LICENSE-2.0 . + --> +<!-- + xslt math lib by Wind Li +Public Functions + sin(x,rounding-factor=100) + cos(x,rounding-factor=100) + tan(x,rounding-factor=100) + ctan(x,rounding-factor=100) + atan2(x, y ,rounding-factor=100) + atan(x,rounding-factor=100) + acos(x,rounding-factor=100) + asin(x,rounding-factor=100) + abs(x) + max(x1,x2) + min(x1,x2) + power(x,power(integer only), rounding-factor=100) + sqrt(x, rounding-factor=100) + convert2radian(x,rounding-factor=100) + convert2degree(x,rounding-factor=100) + convert2fd(x,rounding-factor=100) + --> +<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:draw="http://openoffice.org/2000/drawing" xmlns:o="urn:schemas-microsoft-com:office:office" xmlns:svg="urn:oasis:names:tc:opendocument:xmlns:svg-compatible:1.0" xmlns:v="urn:schemas-microsoft-com:vml" xmlns:w10="urn:schemas-microsoft-com:office:word" xmlns:w="http://schemas.microsoft.com/office/word/2003/wordml" xmlns:text="http://openoffice.org/2000/text" xmlns:style="http://openoffice.org/2000/style" xmlns:fo="urn:oasis:names:tc:opendocument:xmlns:xsl-fo-compatible:1.0" xmlns:office="http://openoffice.org/2000/office" exclude-result-prefixes="draw svg style office fo text"> + <xsl:variable name="pi" select="3.1416"/> + <xsl:template name="math-test"> + sin(34.8) + <xsl:call-template name="sin"> + <xsl:with-param name="x" select="34.8"/> + <xsl:with-param name="rounding-factor" select="100000"/> + </xsl:call-template> + cos(34.8) + <xsl:call-template name="cos"> + <xsl:with-param name="x" select="34.8"/> + <xsl:with-param name="rounding-factor" select="100000"/> + </xsl:call-template> + atan(2.74) + <xsl:call-template name="atan"> + <xsl:with-param name="x" select="2.74"/> + <xsl:with-param name="rounding-factor" select="100000"/> + </xsl:call-template> + acos(0.5) + <xsl:call-template name="acos"> + <xsl:with-param name="x" select="0.5"/> + <xsl:with-param name="rounding-factor" select="100000"/> + </xsl:call-template> + asin(0.5) + <xsl:call-template name="asin"> + <xsl:with-param name="x" select="0.5"/> + <xsl:with-param name="rounding-factor" select="100000"/> + </xsl:call-template> + sqrt(1328.3414) + <xsl:call-template name="sqrt"> + <xsl:with-param name="x" select="1328.3414"/> + <xsl:with-param name="rounding-factor" select="100000"/> + </xsl:call-template> + </xsl:template> + <!-- public functions start --> + <xsl:template name="sin"> + <xsl:param name="x" select="0"/> + <xsl:param name="rounding-factor" select="100"/> + <xsl:variable name="angle" select="$x * 180 div $pi "/> + <xsl:variable name="mod-angle" select="$angle mod 360"/> + <xsl:variable name="sinx"> + <xsl:call-template name="sin-private"> + <xsl:with-param name="x" select=" ( $angle mod 360 ) * $pi div 180 "/> + </xsl:call-template> + </xsl:variable> + <xsl:value-of select=" round ( number($sinx) * $rounding-factor ) div $rounding-factor"/> + </xsl:template> + <xsl:template name="cos"> + <xsl:param name="x" select="0"/> + <xsl:param name="rounding-factor" select="100"/> + <xsl:variable name="angle" select="$x * 180 div $pi "/> + <xsl:variable name="mod-angle" select="$angle mod 360"/> + <xsl:variable name="cosx"> + <xsl:call-template name="cos-private"> + <xsl:with-param name="x" select=" ( $angle mod 360 ) * $pi div 180 "/> + </xsl:call-template> + </xsl:variable> + <xsl:value-of select=" round ( number($cosx) * $rounding-factor ) div $rounding-factor"/> + </xsl:template> + <xsl:template name="tan"> + <xsl:param name="x" select="0"/> + <xsl:param name="rounding-factor" select="100"/> + <xsl:variable name="sinx"> + <xsl:call-template name="sin"> + <xsl:with-param name="x" select="$x"/> + <xsl:with-param name="rounding-factor" select="$rounding-factor * 10"/> + </xsl:call-template> + </xsl:variable> + <xsl:variable name="cosx"> + <xsl:call-template name="cos"> + <xsl:with-param name="x" select="$x"/> + <xsl:with-param name="rounding-factor" select="$rounding-factor * 10"/> + </xsl:call-template> + </xsl:variable> + <xsl:choose> + <xsl:when test=" $cosx = 0 "> + <xsl:message>tan error : tan(<xsl:value-of select="$x"/>) is infinite!</xsl:message> + <xsl:value-of select="63535"/> + </xsl:when> + <xsl:otherwise> + <xsl:value-of select=" round( $sinx div $cosx * $rounding-factor) div $rounding-factor"/> + </xsl:otherwise> + </xsl:choose> + </xsl:template> + <xsl:template name="ctan"> + <xsl:param name="x" select="0"/> + <xsl:param name="rounding-factor" select="100"/> + <xsl:variable name="sinx"> + <xsl:call-template name="sin"> + <xsl:with-param name="x" select="$x"/> + <xsl:with-param name="rounding-factor" select="$rounding-factor * 10"/> + </xsl:call-template> + </xsl:variable> + <xsl:variable name="cosx"> + <xsl:call-template name="cos"> + <xsl:with-param name="x" select="$x"/> + <xsl:with-param name="rounding-factor" select="$rounding-factor * 10"/> + </xsl:call-template> + </xsl:variable> + <xsl:choose> + <xsl:when test=" $sinx = 0 "> + <xsl:message>tan error : tan(<xsl:value-of select="$x"/>) is infinite!</xsl:message> + <xsl:value-of select="63535"/> + </xsl:when> + <xsl:otherwise> + <xsl:value-of select=" round( $cosx div $sinx * $rounding-factor) div $rounding-factor"/> + </xsl:otherwise> + </xsl:choose> + </xsl:template> + <xsl:template name="atan"> + <xsl:param name="x" select="0"/> + <xsl:param name="rounding-factor" select="100"/> + <xsl:choose> + <xsl:when test="$x = 0"> + <xsl:value-of select="0"/> + </xsl:when> + <xsl:when test="$x < 0"> + <xsl:variable name="atan-x"> + <xsl:call-template name="atan"> + <xsl:with-param name="x" select=" -1 * $x"/> + <xsl:with-param name="rounding-factor" select="$rounding-factor"/> + </xsl:call-template> + </xsl:variable> + <xsl:value-of select="-1 * $atan-x"/> + </xsl:when> + <xsl:when test="$x > 1"> + <xsl:variable name="atan-div-x"> + <xsl:call-template name="atan"> + <xsl:with-param name="x" select="1 div $x "/> + <xsl:with-param name="rounding-factor" select="$rounding-factor"/> + </xsl:call-template> + </xsl:variable> + <xsl:value-of select=" $pi div 2 - $atan-div-x"/> + </xsl:when> + <xsl:otherwise> + <xsl:variable name="arctanx"> + <xsl:call-template name="atan-private"> + <xsl:with-param name="x" select=" $x "/> + </xsl:call-template> + </xsl:variable> + <xsl:value-of select=" round ( number($arctanx) * $rounding-factor ) div $rounding-factor"/> + </xsl:otherwise> + </xsl:choose> + </xsl:template> + <xsl:template name="atan2"> + <xsl:param name="x"/> + <xsl:param name="y"/> + <xsl:param name="rounding-factor" select="100"/> + <xsl:choose> + <xsl:when test="$x = 0"> + <xsl:value-of select=" $pi div 2"/> + </xsl:when> + <xsl:otherwise> + <xsl:call-template name="atan"> + <xsl:with-param name="x" select="$y div $x"/> + <xsl:with-param name="rounding-factor" select="$rounding-factor"/> + </xsl:call-template> + </xsl:otherwise> + </xsl:choose> + </xsl:template> + <xsl:template name="acos"> + <xsl:param name="x"/> + <xsl:param name="rounding-factor" select="100"/> + <xsl:variable name="abs-x"> + <xsl:call-template name="abs"> + <xsl:with-param name="x" select="$x"/> + </xsl:call-template> + </xsl:variable> + <xsl:choose> + <xsl:when test="$abs-x > 1"> + <xsl:message>acos error : abs(<xsl:value-of select="$x"/>) greater than 1 !</xsl:message> + </xsl:when> + <xsl:otherwise> + <xsl:call-template name="atan2"> + <xsl:with-param name="x" select="$x"/> + <xsl:with-param name="y"> + <xsl:call-template name="sqrt"> + <xsl:with-param name="x" select="1 - $x * $x"/> + <xsl:with-param name="rounding-factor" select=" concat($rounding-factor,'0') "/> + </xsl:call-template> + </xsl:with-param> + </xsl:call-template> + </xsl:otherwise> + </xsl:choose> + </xsl:template> + <xsl:template name="asin"> + <xsl:param name="x"/> + <xsl:param name="rounding-factor" select="100"/> + <xsl:variable name="abs-x"> + <xsl:call-template name="abs"> + <xsl:with-param name="x" select="$x"/> + </xsl:call-template> + </xsl:variable> + <xsl:choose> + <xsl:when test="$abs-x > 1"> + <xsl:message>asin error : abs(<xsl:value-of select="$x"/>) greater than 1 !</xsl:message> + </xsl:when> + <xsl:otherwise> + <xsl:call-template name="atan2"> + <xsl:with-param name="y" select="$x"/> + <xsl:with-param name="x"> + <xsl:call-template name="sqrt"> + <xsl:with-param name="x" select="1 - $x * $x"/> + <xsl:with-param name="rounding-factor" select=" concat($rounding-factor,'0') "/> + </xsl:call-template> + </xsl:with-param> + </xsl:call-template> + </xsl:otherwise> + </xsl:choose> + </xsl:template> + <xsl:template name="abs"> + <xsl:param name="x"/> + <xsl:choose> + <xsl:when test="$x > 0"> + <xsl:value-of select="$x"/> + </xsl:when> + <xsl:otherwise> + <xsl:value-of select="$x * -1"/> + </xsl:otherwise> + </xsl:choose> + </xsl:template> + <xsl:template name="max"> + <xsl:param name="x1"/> + <xsl:param name="x2"/> + <xsl:choose> + <xsl:when test="$x1 > $x2"> + <xsl:value-of select="$x1"/> + </xsl:when> + <xsl:otherwise> + <xsl:value-of select="$x2"/> + </xsl:otherwise> + </xsl:choose> + </xsl:template> + <xsl:template name="min"> + <xsl:param name="x1"/> + <xsl:param name="x2"/> + <xsl:choose> + <xsl:when test="$x1 < $x2"> + <xsl:value-of select="$x1"/> + </xsl:when> + <xsl:otherwise> + <xsl:value-of select="$x2"/> + </xsl:otherwise> + </xsl:choose> + </xsl:template> + <xsl:template name="power"> + <xsl:param name="x"/> + <xsl:param name="y" select="1"/> + <xsl:param name="rounding-factor" select="100"/> + <!-- z is a private param --> + <xsl:param name="z" select="1"/> + <xsl:choose> + <xsl:when test="$y > 0"> + <xsl:call-template name="power"> + <xsl:with-param name="x" select="$x"/> + <xsl:with-param name="y" select="$y - 1"/> + <xsl:with-param name="z" select="$z * $x"/> + <xsl:with-param name="rounding-factor" select="$rounding-factor"/> + </xsl:call-template> + </xsl:when> + <xsl:otherwise> + <xsl:value-of select=" round( $z * $rounding-factor) div $rounding-factor"/> + </xsl:otherwise> + </xsl:choose> + </xsl:template> + <xsl:template name="sqrt"> + <xsl:param name="x"/> + <xsl:param name="rounding-factor" select="100"/> + <xsl:choose> + <xsl:when test="$x = 0">0</xsl:when> + <xsl:when test="$x < 0"> + <xsl:message>sqrt error : <xsl:value-of select="$x"/> less than 0!</xsl:message> + </xsl:when> + <xsl:otherwise> + <xsl:call-template name="sqrt-private"> + <xsl:with-param name="x" select="$x"/> + <xsl:with-param name="rounding-factor" select="$rounding-factor"/> + </xsl:call-template> + </xsl:otherwise> + </xsl:choose> + </xsl:template> + <!-- public functions end --> + <!-- +Private functions: +sin-private +cos-private +atan-private +sqrt-private +integer-sqrt +Sqrt-GetOneDigit +--> + <xsl:template name="sin-private"> + <xsl:param name="x" select="0"/> + <xsl:param name="n" select="0"/> + <xsl:param name="nx" select="1"/> + <xsl:param name="sign" select="1"/> + <xsl:param name="max-n" select="20"/> + <xsl:param name="sinx" select="0"/> + <xsl:choose> + <xsl:when test="not ($max-n > $n) or $nx = 0 "> + <xsl:value-of select="$sinx"/> + </xsl:when> + <xsl:when test="$n = 0"> + <xsl:call-template name="sin-private"> + <xsl:with-param name="x" select="$x"/> + <xsl:with-param name="n" select="$n + 1"/> + <xsl:with-param name="sign" select="$sign * -1"/> + <xsl:with-param name="max-n" select="$max-n"/> + <xsl:with-param name="nx" select="$x "/> + <xsl:with-param name="sinx" select="$sinx + $x"/> + </xsl:call-template> + </xsl:when> + <xsl:otherwise> + <xsl:variable name="new-nx" select="($nx * $x * $x) div ( 2 * $n ) div ( 2 * $n + 1) "/> + <xsl:call-template name="sin-private"> + <xsl:with-param name="x" select="$x"/> + <xsl:with-param name="n" select="$n + 1"/> + <xsl:with-param name="sign" select="$sign * -1"/> + <xsl:with-param name="max-n" select="$max-n"/> + <xsl:with-param name="nx" select=" $new-nx "/> + <xsl:with-param name="sinx" select="$sinx + $new-nx * $sign"/> + </xsl:call-template> + </xsl:otherwise> + </xsl:choose> + </xsl:template> + <xsl:template name="cos-private"> + <xsl:param name="x" select="0"/> + <xsl:param name="n" select="0"/> + <xsl:param name="nx" select="1"/> + <xsl:param name="sign" select="1"/> + <xsl:param name="max-n" select="20"/> + <xsl:param name="cosx" select="0"/> + <xsl:choose> + <xsl:when test="not ($max-n > $n) or $nx = 0 "> + <xsl:value-of select="$cosx"/> + </xsl:when> + <xsl:when test="$n = 0"> + <xsl:call-template name="cos-private"> + <xsl:with-param name="x" select="$x"/> + <xsl:with-param name="n" select="$n + 1"/> + <xsl:with-param name="sign" select="$sign * -1"/> + <xsl:with-param name="max-n" select="$max-n"/> + <xsl:with-param name="nx" select=" 1 "/> + <xsl:with-param name="cosx" select="1"/> + </xsl:call-template> + </xsl:when> + <xsl:otherwise> + <xsl:variable name="new-nx" select="($nx * $x * $x) div ( 2 * $n -1 ) div ( 2 * $n ) "/> + <xsl:call-template name="cos-private"> + <xsl:with-param name="x" select="$x"/> + <xsl:with-param name="n" select="$n + 1"/> + <xsl:with-param name="sign" select="$sign * -1"/> + <xsl:with-param name="max-n" select="$max-n"/> + <xsl:with-param name="nx" select=" $new-nx "/> + <xsl:with-param name="cosx" select="$cosx + $new-nx * $sign"/> + </xsl:call-template> + </xsl:otherwise> + </xsl:choose> + </xsl:template> + <xsl:template name="atan-private"> + <xsl:param name="x" select="0"/> + <xsl:param name="n" select="0"/> + <xsl:param name="nx" select="1"/> + <xsl:param name="sign" select="1"/> + <xsl:param name="max-n" select="40"/> + <xsl:param name="arctanx" select="0"/> + <xsl:choose> + <xsl:when test="not ($max-n > $n) or $nx = 0 "> + <xsl:value-of select="$arctanx"/> + </xsl:when> + <xsl:when test="$n = 0"> + <xsl:call-template name="atan-private"> + <xsl:with-param name="x" select="$x"/> + <xsl:with-param name="n" select="$n + 1"/> + <xsl:with-param name="sign" select="$sign * -1"/> + <xsl:with-param name="max-n" select="$max-n"/> + <xsl:with-param name="nx" select="$x "/> + <xsl:with-param name="arctanx" select="$arctanx + $x"/> + </xsl:call-template> + </xsl:when> + <xsl:otherwise> + <xsl:variable name="new-nx" select=" $nx * $x * $x "/> + <xsl:call-template name="atan-private"> + <xsl:with-param name="x" select="$x"/> + <xsl:with-param name="n" select="$n + 1"/> + <xsl:with-param name="sign" select="$sign * -1"/> + <xsl:with-param name="max-n" select="$max-n"/> + <xsl:with-param name="nx" select=" $new-nx "/> + <xsl:with-param name="arctanx" select="$arctanx + $new-nx div (2 * $n +1) * $sign"/> + </xsl:call-template> + </xsl:otherwise> + </xsl:choose> + </xsl:template> + <xsl:template name="sqrt-private"> + <xsl:param name="x"/> + <xsl:param name="rounding-factor" select="100"/> + <xsl:variable name="shift" select="string-length( $rounding-factor)"/> + <xsl:variable name="power"> + <xsl:call-template name="power"> + <xsl:with-param name="x" select="100"/> + <xsl:with-param name="y" select="$shift"/> + <xsl:with-param name="rounding-factor" select="1"/> + </xsl:call-template> + </xsl:variable> + <xsl:variable name="integer-x" select=" round( $power * $x )"/> + <xsl:variable name="integer-quotient"> + <xsl:call-template name="integer-sqrt"> + <xsl:with-param name="x" select="$integer-x"/> + <xsl:with-param name="length" select=" string-length( $integer-x ) "/> + <xsl:with-param name="curr-pos" select=" 2 - (round (string-length( $integer-x ) div 2 ) * 2 - string-length( $integer-x ) ) "/> + </xsl:call-template> + </xsl:variable> + <xsl:variable name="power-10"> + <xsl:call-template name="power"> + <xsl:with-param name="x" select="10"/> + <xsl:with-param name="y" select="$shift - 1"/> + <xsl:with-param name="rounding-factor" select="1"/> + </xsl:call-template> + </xsl:variable> + <xsl:value-of select=" round( $integer-quotient div 10) div $power-10 "/> + </xsl:template> + <xsl:template name="integer-sqrt"> + <xsl:param name="x"/> + <xsl:param name="length"/> + <xsl:param name="curr-pos"/> + <xsl:param name="last-quotient" select="0"/> + <xsl:choose> + <xsl:when test="$curr-pos > $length"> + <xsl:value-of select="$last-quotient"/> + </xsl:when> + <xsl:otherwise> + <xsl:variable name="curr-x" select="substring( $x, 1, $curr-pos )"/> + <xsl:variable name="new-quotient"> + <xsl:call-template name="get-one-sqrt-digit"> + <xsl:with-param name="x" select="$curr-x"/> + <xsl:with-param name="last-quotient" select="$last-quotient"/> + <xsl:with-param name="n" select="5"/> + <xsl:with-param name="direct" select="0"/> + </xsl:call-template> + </xsl:variable> + <xsl:call-template name="integer-sqrt"> + <xsl:with-param name="x" select="$x"/> + <xsl:with-param name="length" select="$length"/> + <xsl:with-param name="curr-pos" select="$curr-pos + 2"/> + <xsl:with-param name="last-quotient" select="number($new-quotient)"/> + </xsl:call-template> + </xsl:otherwise> + </xsl:choose> + </xsl:template> + <xsl:template name="get-one-sqrt-digit"> + <xsl:param name="x"/> + <xsl:param name="last-quotient"/> + <xsl:param name="n"/> + <xsl:param name="direct" select="1"/> + <xsl:variable name="quotient" select=" concat( $last-quotient, $n) "/> + <xsl:variable name="accumulate" select="$quotient * $quotient "/> + <xsl:choose> + <xsl:when test="$accumulate = $x"> + <xsl:value-of select="concat($last-quotient , $n )"/> + </xsl:when> + <xsl:when test="$direct = 0 and $accumulate < $x"> + <xsl:call-template name="get-one-sqrt-digit"> + <xsl:with-param name="x" select="$x"/> + <xsl:with-param name="last-quotient" select="$last-quotient"/> + <xsl:with-param name="n" select="$n + 1"/> + <xsl:with-param name="direct" select="1"/> + </xsl:call-template> + </xsl:when> + <xsl:when test="$direct = 0 and $accumulate > $x"> + <xsl:call-template name="get-one-sqrt-digit"> + <xsl:with-param name="x" select="$x"/> + <xsl:with-param name="last-quotient" select="$last-quotient"/> + <xsl:with-param name="n" select="$n - 1"/> + <xsl:with-param name="direct" select="-1"/> + </xsl:call-template> + </xsl:when> + <xsl:when test=" $accumulate * $direct < $x * $direct "> + <xsl:call-template name="get-one-sqrt-digit"> + <xsl:with-param name="x" select="$x"/> + <xsl:with-param name="last-quotient" select="$last-quotient"/> + <xsl:with-param name="n" select="$n+ $direct"/> + <xsl:with-param name="direct" select="$direct"/> + </xsl:call-template> + </xsl:when> + <xsl:when test="not($n < 9) or $n = -1"> + <xsl:value-of select="concat($last-quotient , $n - $direct) "/> + </xsl:when> + <xsl:when test="$direct = 1"> + <xsl:value-of select="concat($last-quotient , $n - 1) "/> + </xsl:when> + <xsl:otherwise> + <xsl:value-of select="concat($last-quotient , $n) "/> + </xsl:otherwise> + </xsl:choose> + </xsl:template> + <xsl:template name="convert2redian"> + <xsl:param name="x" select="'0'"/> + <xsl:param name="rounding-factor" select="100"/> + <xsl:choose> + <xsl:when test="contains($x,'deg')"> + <xsl:value-of select="round($rounding-factor * number(substring-before($x, 'deg') div 180 * $pi)) div $rounding-factor"/> + </xsl:when> + <xsl:when test="contains($x,'fd')"> + <xsl:value-of select="round($rounding-factor * number(substring-before($x, 'fd') div 180 div 65536 * $pi)) div $rounding-factor"/> + </xsl:when> + <xsl:otherwise> + <xsl:value-of select="round($rounding-factor * number($x) div 180 * $pi) div $rounding-factor"/> + </xsl:otherwise> + </xsl:choose> + </xsl:template> + <xsl:template name="convert2degree"> + <xsl:param name="x" select="'0'"/> + <xsl:param name="rounding-factor" select="100"/> + <xsl:choose> + <xsl:when test="contains($x,'deg')"> + <xsl:value-of select="round($rounding-factor * substring-before($x,'deg')) div $rounding-factor"/> + </xsl:when> + <xsl:when test="contains($x,'fd')"> + <xsl:value-of select="round($rounding-factor * number(substring-before($x, 'fd')) div 65536 ) div $rounding-factor"/> + </xsl:when> + <xsl:otherwise> + <xsl:value-of select="round($rounding-factor * number($x) * 180 div $pi) div $rounding-factor"/> + </xsl:otherwise> + </xsl:choose> + </xsl:template> + <xsl:template name="convert2fd"> + <xsl:param name="x" select="'0'"/> + <xsl:param name="rounding-factor" select="100"/> + <xsl:choose> + <xsl:when test="contains($x,'deg')"> + <xsl:value-of select="round($rounding-factor * number(substring-before($x, 'deg') * 65535)) div $rounding-factor"/> + </xsl:when> + <xsl:when test="contains($x,'fd')"> + <xsl:value-of select="round($rounding-factor * number(substring-before($x, 'fd'))) div $rounding-factor"/> + </xsl:when> + <xsl:otherwise> + <xsl:value-of select="round($rounding-factor * number($x) * 180 div $pi * 65535) div $rounding-factor"/> + </xsl:otherwise> + </xsl:choose> + </xsl:template> + +</xsl:stylesheet> diff --git a/filter/source/xslt/common/measure_conversion.xsl b/filter/source/xslt/common/measure_conversion.xsl new file mode 100644 index 000000000..50f34e959 --- /dev/null +++ b/filter/source/xslt/common/measure_conversion.xsl @@ -0,0 +1,479 @@ +<?xml version="1.0" encoding="UTF-8"?> +<!-- + * This file is part of the LibreOffice project. + * + * This Source Code Form is subject to the terms of the Mozilla Public + * License, v. 2.0. If a copy of the MPL was not distributed with this + * file, You can obtain one at http://mozilla.org/MPL/2.0/. + * + * This file incorporates work covered by the following license notice: + * + * Licensed to the Apache Software Foundation (ASF) under one or more + * contributor license agreements. See the NOTICE file distributed + * with this work for additional information regarding copyright + * ownership. The ASF licenses this file to you under the Apache + * License, Version 2.0 (the "License"); you may not use this file + * except in compliance with the License. You may obtain a copy of + * the License at http://www.apache.org/licenses/LICENSE-2.0 . +--> +<!-- + For further documentation and updates visit http://xml.openoffice.org/odf2xhtml +--> +<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform"> + <!-- DPI (dots per inch) the standard resolution of given pictures (necessary for the conversion of 'cm' into 'pixel') + Although many pictures have a 96 dpi resolution, a higher resolution give better results for common browsers --> + <xsl:param name="dpi" select="111"/> + <xsl:param name="centimeter-in-mm" select="10"/> + <xsl:param name="inch-in-mm" select="25.4"/> + <xsl:param name="didot-point-in-mm" select="0.376065"/> + <xsl:param name="pica-in-mm" select="4.2333333"/> + <xsl:param name="point-in-mm" select="0.3527778"/> + <xsl:param name="twip-in-mm" select="0.017636684"/> + <xsl:param name="pixel-in-mm" select="$inch-in-mm div $dpi"/> + <!-- ***** MEASUREMENT CONVERSIONS ***** + PARAM 'value' + The measure to be converted. + The current measure is judged by a substring (e.g. 'mm', 'cm', 'in', 'pica'...) + directly added to the number. + + PARAM 'rounding-factor' + Is used for the rounding of decimal places. + The parameter number is the product of 1 and some '10', where + every zero represents a decimal place. + + For example, providing as parameter: + <xsl:param name="rounding-factor" select="10000" /> + Gives by default four decimal places. + + To round two decimal places, basically the following is done: + <xsl:value-of select="round(100 * value) div 100"/> + + RETURN The converted number, by default rounded to four decimal places. + In case the input measure could not be matched the same value is + returned and a warning message is written out. + + + + MEASURE LIST: + * 1 millimeter (mm), the basic measure + + * 1 centimeter (cm) = 10 mm + + * 1 inch (in) = 25.4 mm + While the English have already seen the light (read: the metric system), the US + remains loyal to this medieval system. + + * 1 point (pt) = 0.35277777.. mm + Sometimes called PostScript point (ppt), as when Adobe created PostScript, they added their own system of points. + There are exactly 72 PostScript points in 1 inch. + + * 1 twip = twentieth of a (PostScript) point + A twip (twentieth of a point) is a 1/20th of a PostScript point, a traditional measure in printing. + + * 1 didot point (dpt) = 0.376065 mm + Didot point after the French typographer Firmin Didot (1764-1836). + + More details under + http://www.unc.edu/~rowlett/units/dictP.html: + "A unit of length used by typographers and printers. When printing was done + from hand-set metal type, one point represented the smallest element of type + that could be handled, roughly 1/64 inch. Eventually, the point was standardized + in Britain and America as exactly 1/72.27 = 0.013 837 inch, which is + about 0.35 mm (351.46 micrometers). In continental Europe, typographers + traditionally used a slightly larger point of 0.014 83 inch (about + 1/72 pouce, 0.377 mm, or roughly 1/67 English inch), called a Didot point + after the French typographer Firmin Didot (1764-1836). In the U.S., + Adobe software defines the point to be exactly 1/72 inch (0.013 888 9 inch + or 0.352 777 8 millimeters) and TeX software uses a slightly smaller point + of 0.351 459 8035 mm. The German standards agency DIN has proposed that + all these units be replaced by multiples of 0.25 millimeters (1/101.6 inch). + + * 1 pica = 4.233333 mm + 1/6 inch or 12 points + + * 1 pixel (px) = 0.26458333.. mm (relative to 'DPI', here: 96 dpi) + Most pictures have the 96 dpi resolution, but the dpi variable may vary by stylesheet parameter + + + --> + <!-- changing measure to mm --> + <xsl:template name="convert2mm"> + <xsl:param name="value"/> + <xsl:param name="rounding-factor" select="10000"/> + <xsl:choose> + <xsl:when test="contains($value, 'mm')"> + <xsl:value-of select="substring-before($value, 'mm')"/> + </xsl:when> + <xsl:when test="contains($value, 'cm')"> + <xsl:value-of select="round($rounding-factor * number(substring-before($value, 'cm' ) * $centimeter-in-mm)) div $rounding-factor"/> + </xsl:when> + <xsl:when test="contains($value, 'in')"> + <xsl:value-of select="round($rounding-factor * number(substring-before($value, 'in' ) * $inch-in-mm)) div $rounding-factor"/> + </xsl:when> + <xsl:when test="contains($value, 'pt')"> + <xsl:value-of select="round($rounding-factor * number(substring-before($value, 'pt') * $point-in-mm)) div $rounding-factor"/> + </xsl:when> + <xsl:when test="contains($value, 'twip')"> + <xsl:value-of select="round($rounding-factor * number(substring-before($value, 'twip') * $twip-in-mm)) div $rounding-factor"/> + </xsl:when> + <xsl:when test="contains($value, 'dpt')"> + <xsl:value-of select="round($rounding-factor * number(substring-before($value, 'dpt') * $didot-point-in-mm)) div $rounding-factor"/> + </xsl:when> + <xsl:when test="contains($value, 'pica')"> + <xsl:value-of select="round($rounding-factor * number(substring-before($value, 'pica') * $pica-in-mm)) div $rounding-factor"/> + </xsl:when> + <xsl:when test="contains($value, 'px')"> + <xsl:value-of select="round($rounding-factor * number(substring-before($value, 'px') * $pixel-in-mm)) div $rounding-factor"/> + </xsl:when> + <xsl:otherwise> + <xsl:message>measure_conversion.xsl: Find no conversion for <xsl:value-of select="$value"/> to 'mm'!</xsl:message> + <xsl:value-of select="$value"/> + </xsl:otherwise> + </xsl:choose> + </xsl:template> + <!-- changing measure to cm --> + <xsl:template name="convert2cm"> + <xsl:param name="value"/> + <xsl:param name="rounding-factor" select="10000"/> + <xsl:choose> + <xsl:when test="contains($value, 'mm')"> + <xsl:value-of select="round($rounding-factor * number(substring-before($value, 'mm') div $centimeter-in-mm)) div $rounding-factor"/> + </xsl:when> + <xsl:when test="contains($value, 'cm')"> + <xsl:value-of select="substring-before($value, 'cm')"/> + </xsl:when> + <xsl:when test="contains($value, 'in')"> + <xsl:value-of select="round($rounding-factor * number(substring-before($value, 'in') div $centimeter-in-mm * $inch-in-mm)) div $rounding-factor"/> + </xsl:when> + <xsl:when test="contains($value, 'pt')"> + <xsl:value-of select="round($rounding-factor * number(substring-before($value, 'pt') div $centimeter-in-mm * $point-in-mm)) div $rounding-factor"/> + </xsl:when> + <xsl:when test="contains($value, 'dpt')"> + <xsl:value-of select="round($rounding-factor * number(substring-before($value, 'dpt') div $centimeter-in-mm * $didot-point-in-mm)) div $rounding-factor"/> + </xsl:when> + <xsl:when test="contains($value, 'pica')"> + <xsl:value-of select="round($rounding-factor * number(substring-before($value, 'pica') div $centimeter-in-mm * $pica-in-mm)) div $rounding-factor"/> + </xsl:when> + <xsl:when test="contains($value, 'twip')"> + <xsl:value-of select="round($rounding-factor * number(substring-before($value, 'twip') div $centimeter-in-mm * $twip-in-mm)) div $rounding-factor"/> + </xsl:when> + <xsl:when test="contains($value, 'px')"> + <xsl:value-of select="round($rounding-factor * number(substring-before($value, 'px') div $centimeter-in-mm * $pixel-in-mm)) div $rounding-factor"/> + </xsl:when> + <xsl:otherwise> + <xsl:message>measure_conversion.xsl: Find no conversion for <xsl:value-of select="$value"/> to 'cm'!</xsl:message> + <xsl:value-of select="$value"/> + </xsl:otherwise> + </xsl:choose> + </xsl:template> + <!-- changing measure to inch (cp. section comment) --> + <xsl:template name="convert2in"> + <xsl:param name="value"/> + <xsl:param name="rounding-factor" select="10000"/> + <xsl:choose> + <xsl:when test="contains($value, 'mm')"> + <xsl:value-of select="round($rounding-factor * number(substring-before($value, 'mm') div $inch-in-mm)) div $rounding-factor"/> + </xsl:when> + <xsl:when test="contains($value, 'cm')"> + <xsl:value-of select="round($rounding-factor * number(substring-before($value, 'cm') div $inch-in-mm * $centimeter-in-mm)) div $rounding-factor"/> + </xsl:when> + <xsl:when test="contains($value, 'in')"> + <xsl:value-of select="substring-before($value, 'in')"/> + </xsl:when> + <xsl:when test="contains($value, 'pt')"> + <xsl:value-of select="round($rounding-factor * number(substring-before($value, 'pt') div $inch-in-mm * $point-in-mm)) div $rounding-factor"/> + </xsl:when> + <xsl:when test="contains($value, 'dpt')"> + <xsl:value-of select="round($rounding-factor * number(substring-before($value, 'dpt') div $inch-in-mm * $didot-point-in-mm)) div $rounding-factor"/> + </xsl:when> + <xsl:when test="contains($value, 'pica')"> + <xsl:value-of select="round($rounding-factor * number(substring-before($value, 'pica') div $inch-in-mm * $pica-in-mm)) div $rounding-factor"/> + </xsl:when> + <xsl:when test="contains($value, 'twip')"> + <xsl:value-of select="round($rounding-factor * number(substring-before($value, 'twip') div $inch-in-mm * $twip-in-mm)) div $rounding-factor"/> + </xsl:when> + <xsl:when test="contains($value, 'px')"> + <xsl:value-of select="round($rounding-factor * number(substring-before($value, 'px') div $inch-in-mm * $pixel-in-mm)) div $rounding-factor"/> + </xsl:when> + <xsl:otherwise> + <xsl:message>measure_conversion.xsl: Find no conversion for <xsl:value-of select="$value"/> to 'in'!</xsl:message> + <xsl:value-of select="$value"/> + </xsl:otherwise> + </xsl:choose> + </xsl:template> + <!-- changing measure to dpt (cp. section comment) --> + <xsl:template name="convert2dpt"> + <xsl:param name="value"/> + <xsl:param name="rounding-factor" select="10000"/> + <xsl:choose> + <xsl:when test="contains($value, 'mm')"> + <xsl:value-of select="round($rounding-factor * number(substring-before($value, 'mm') div $didot-point-in-mm)) div $rounding-factor"/> + </xsl:when> + <xsl:when test="contains($value, 'cm')"> + <xsl:value-of select="round($rounding-factor * number(substring-before($value, 'cm') div $didot-point-in-mm * $centimeter-in-mm)) div $rounding-factor"/> + </xsl:when> + <xsl:when test="contains($value, 'in')"> + <xsl:value-of select="round($rounding-factor * number(substring-before($value, 'in') div $didot-point-in-mm * $inch-in-mm)) div $rounding-factor"/> + </xsl:when> + <xsl:when test="contains($value, 'pt')"> + <xsl:value-of select="round($rounding-factor * number(substring-before($value, 'pt') div $didot-point-in-mm * $point-in-mm)) div $rounding-factor"/> + </xsl:when> + <xsl:when test="contains($value, 'dpt')"> + <xsl:value-of select="substring-before($value, 'dpt')"/> + </xsl:when> + <xsl:when test="contains($value, 'pica')"> + <xsl:value-of select="round($rounding-factor * number(substring-before($value, 'pica') div $didot-point-in-mm * $pica-in-mm)) div $rounding-factor"/> + </xsl:when> + <xsl:when test="contains($value, 'twip')"> + <xsl:value-of select="round($rounding-factor * number(substring-before($value, 'twip') div $didot-point-in-mm * $twip-in-mm)) div $rounding-factor"/> + </xsl:when> + <xsl:when test="contains($value, 'px')"> + <xsl:value-of select="round($rounding-factor * number(substring-before($value, 'px') div $didot-point-in-mm * $pixel-in-mm)) div $rounding-factor"/> + </xsl:when> + <xsl:otherwise> + <xsl:message>measure_conversion.xsl: Find no conversion for <xsl:value-of select="$value"/> to 'dpt'!</xsl:message> + <xsl:value-of select="$value"/> + </xsl:otherwise> + </xsl:choose> + </xsl:template> + <!-- changing measure to pica (cp. section comment) --> + <xsl:template name="convert2pica"> + <xsl:param name="value"/> + <xsl:param name="rounding-factor" select="10000"/> + <xsl:choose> + <xsl:when test="contains($value, 'mm')"> + <xsl:value-of select="round($rounding-factor * number(substring-before($value, 'mm') div $pica-in-mm)) div $rounding-factor"/> + </xsl:when> + <xsl:when test="contains($value, 'cm')"> + <xsl:value-of select="round($rounding-factor * number(substring-before($value, 'cm') div $pica-in-mm * $centimeter-in-mm)) div $rounding-factor"/> + </xsl:when> + <xsl:when test="contains($value, 'in')"> + <xsl:value-of select="round($rounding-factor * number(substring-before($value, 'in') div $pica-in-mm * $inch-in-mm)) div $rounding-factor"/> + </xsl:when> + <xsl:when test="contains($value, 'pt')"> + <xsl:value-of select="round($rounding-factor * number(substring-before($value, 'pt') div $pica-in-mm * $point-in-mm)) div $rounding-factor"/> + </xsl:when> + <xsl:when test="contains($value, 'dpt')"> + <xsl:value-of select="round($rounding-factor * number(substring-before($value, 'dpt') div $pica-in-mm * $didot-point-in-mm)) div $rounding-factor"/> + </xsl:when> + <xsl:when test="contains($value, 'pica')"> + <xsl:value-of select="substring-before($value, 'pica')"/> + </xsl:when> + <xsl:when test="contains($value, 'twip')"> + <xsl:value-of select="round($rounding-factor * number(substring-before($value, 'twip') div $pica-in-mm * $twip-in-mm)) div $rounding-factor"/> + </xsl:when> + <xsl:when test="contains($value, 'px')"> + <xsl:value-of select="round($rounding-factor * number(substring-before($value, 'px') div $pica-in-mm * $pixel-in-mm)) div $rounding-factor"/> + </xsl:when> + <xsl:otherwise> + <xsl:message>measure_conversion.xsl: Find no conversion for <xsl:value-of select="$value"/> to 'pica'!</xsl:message> + <xsl:value-of select="$value"/> + </xsl:otherwise> + </xsl:choose> + </xsl:template> + <!-- changing measure to pt (cp. section comment) --> + <xsl:template name="convert2pt"> + <xsl:param name="value"/> + <xsl:param name="rounding-factor" select="10000"/> + <xsl:choose> + <xsl:when test="contains($value, 'mm')"> + <xsl:value-of select="round($rounding-factor * number(substring-before($value, 'mm') div $point-in-mm)) div $rounding-factor"/> + </xsl:when> + <xsl:when test="contains($value, 'cm')"> + <xsl:value-of select="round($rounding-factor * number(substring-before($value, 'cm') div $point-in-mm * $centimeter-in-mm)) div $rounding-factor"/> + </xsl:when> + <xsl:when test="contains($value, 'in')"> + <xsl:value-of select="round($rounding-factor * number(substring-before($value, 'in') div $point-in-mm * $inch-in-mm)) div $rounding-factor"/> + </xsl:when> + <xsl:when test="contains($value, 'pt')"> + <xsl:value-of select="substring-before($value, 'pt')"/> + </xsl:when> + <xsl:when test="contains($value, 'dpt')"> + <xsl:value-of select="round($rounding-factor * number(substring-before($value, 'dpt') div $point-in-mm * $didot-point-in-mm)) div $rounding-factor"/> + </xsl:when> + <xsl:when test="contains($value, 'pica')"> + <xsl:value-of select="round($rounding-factor * number(substring-before($value, 'pica') div $point-in-mm * $pica-in-mm)) div $rounding-factor"/> + </xsl:when> + <xsl:when test="contains($value, 'twip')"> + <xsl:value-of select="round($rounding-factor * number(substring-before($value, 'twip') div $point-in-mm * $twip-in-mm)) div $rounding-factor"/> + </xsl:when> + <xsl:when test="contains($value, 'px')"> + <xsl:value-of select="round($rounding-factor * number(substring-before($value, 'px') div $point-in-mm * $pixel-in-mm)) div $rounding-factor"/> + </xsl:when> + <xsl:otherwise> + <xsl:message>measure_conversion.xsl: Find no conversion for <xsl:value-of select="$value"/> to 'pt'!</xsl:message> + <xsl:value-of select="$value"/> + </xsl:otherwise> + </xsl:choose> + </xsl:template> + <!-- changing measure to twip (cp. section comment) --> + <xsl:template name="convert2twip"> + <xsl:param name="value"/> + <xsl:param name="rounding-factor" select="10000"/> + <xsl:choose> + <xsl:when test="contains($value, 'mm')"> + <xsl:value-of select="round($rounding-factor * number(substring-before($value, 'mm') div $twip-in-mm)) div $rounding-factor"/> + </xsl:when> + <xsl:when test="contains($value, 'cm')"> + <xsl:value-of select="round($rounding-factor * number(substring-before($value, 'cm') div $twip-in-mm * $centimeter-in-mm)) div $rounding-factor"/> + </xsl:when> + <xsl:when test="contains($value, 'in')"> + <xsl:value-of select="round($rounding-factor * number(substring-before($value, 'in') div $twip-in-mm * $inch-in-mm)) div $rounding-factor"/> + </xsl:when> + <xsl:when test="contains($value, 'pt')"> + <xsl:value-of select="round($rounding-factor * number(substring-before($value, 'pt') div $twip-in-mm * $point-in-mm)) div $rounding-factor"/> + </xsl:when> + <xsl:when test="contains($value, 'dpt')"> + <xsl:value-of select="round($rounding-factor * number(substring-before($value, 'dpt') div $twip-in-mm * $didot-point-in-mm)) div $rounding-factor"/> + </xsl:when> + <xsl:when test="contains($value, 'pica')"> + <xsl:value-of select="round($rounding-factor * number(substring-before($value, 'pica') div $twip-in-mm * $pica-in-mm)) div $rounding-factor"/> + </xsl:when> + <xsl:when test="contains($value, 'twip')"> + <xsl:value-of select="substring-before($value, 'twip')"/> + </xsl:when> + <xsl:when test="contains($value, 'px')"> + <xsl:value-of select="round($rounding-factor * number(substring-before($value, 'px') div $twip-in-mm * $pixel-in-mm)) div $rounding-factor"/> + </xsl:when> + <xsl:otherwise> + <xsl:message>measure_conversion.xsl: Find no conversion for <xsl:value-of select="$value"/> to 'twip'!</xsl:message> + <xsl:value-of select="$value"/> + </xsl:otherwise> + </xsl:choose> + </xsl:template> + <!-- changing measure to pixel by via parameter provided dpi (dots per inch) standard factor (cp. section comment) --> + <xsl:template name="convert2px"> + <xsl:param name="value"/> + <xsl:choose> + <xsl:when test="contains($value, 'mm')"> + <xsl:value-of select="round(number(substring-before($value, 'mm')) div $pixel-in-mm)"/> + </xsl:when> + <xsl:when test="contains($value, 'cm')"> + <xsl:value-of select="round(number(substring-before($value, 'cm')) div $pixel-in-mm * $centimeter-in-mm)"/> + </xsl:when> + <xsl:when test="contains($value, 'in')"> + <xsl:value-of select="round(number(substring-before($value, 'in')) div $pixel-in-mm * $inch-in-mm)"/> + </xsl:when> + <xsl:when test="contains($value, 'pt')"> + <xsl:value-of select="round(number(substring-before($value, 'pt')) div $pixel-in-mm * $point-in-mm)"/> + </xsl:when> + <xsl:when test="contains($value, 'dpt')"> + <xsl:value-of select="round(number(substring-before($value, 'dpt')) div $pixel-in-mm * $didot-point-in-mm)"/> + </xsl:when> + <xsl:when test="contains($value, 'pica')"> + <xsl:value-of select="round(number(substring-before($value, 'pica')) div $pixel-in-mm * $pica-in-mm)"/> + </xsl:when> + <xsl:when test="contains($value, 'twip')"> + <xsl:value-of select="round(number(substring-before($value, 'twip')) div $pixel-in-mm * $twip-in-mm)"/> + </xsl:when> + <xsl:when test="contains($value, 'px')"> + <xsl:value-of select="$value"/> + </xsl:when> + <xsl:otherwise> + <xsl:message>measure_conversion.xsl: Find no conversion for <xsl:value-of select="$value"/> to 'px'!</xsl:message> + <xsl:value-of select="$value"/> + </xsl:otherwise> + </xsl:choose> + </xsl:template> + <xsl:template name="ConvertMeasure"> + <xsl:param name="TargetMeasure" select="'cm'"/> + <xsl:param name="TargetTruncate" select=" 'all' "/> + <xsl:param name="value"/> + <!-- When TargetTruncate ='all' it returns the number whichsoever the return value is negative or positive + When TargetTruncate ='nonNegative' it only returns nonNegative number, all negative number to be returned as 0 + When TargetTruncate ='positive" it only returns positive number, all nonPositive number to be returned as 1 --> + <xsl:variable name="return_value"> + <xsl:choose> + <!-- remove the measure mark, if the value is null, the result should be 0. Must be the first case --> + <xsl:when test="string-length(translate(string($value),'abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ ','')) = 0">0</xsl:when> + <xsl:when test="string-length(translate(string($value),'- .0123456789','')) = 0"> + <xsl:value-of select="$value"/> + </xsl:when> + <xsl:when test="$TargetMeasure = 'cm'"> + <xsl:call-template name="convert2cm"> + <xsl:with-param name="value" select="$value"/> + </xsl:call-template> + </xsl:when> + <xsl:when test="$TargetMeasure = 'pt'"> + <xsl:call-template name="convert2pt"> + <xsl:with-param name="value" select="$value"/> + </xsl:call-template> + </xsl:when> + <xsl:when test="$TargetMeasure = 'twip'"> + <xsl:call-template name="convert2twip"> + <xsl:with-param name="value" select="$value"/> + </xsl:call-template> + </xsl:when> + <xsl:when test="$TargetMeasure = 'in'"> + <xsl:call-template name="convert2in"> + <xsl:with-param name="value" select="$value"/> + </xsl:call-template> + </xsl:when> + </xsl:choose> + </xsl:variable> + <xsl:choose> + <xsl:when test="$TargetTruncate = 'all' "> + <xsl:choose> + <xsl:when test="string(number($TargetMeasure)) = 'NaN' "> + <xsl:value-of select=" '0' "/> + </xsl:when> + <xsl:otherwise> + <xsl:value-of select="$return_value"/> + </xsl:otherwise> + </xsl:choose> + </xsl:when> + <xsl:when test="$TargetTruncate = 'nonNegative' "> + <xsl:choose> + <xsl:when test="string(number($TargetMeasure)) = 'NaN' "> + <xsl:value-of select=" '0' "/> + </xsl:when> + <xsl:otherwise> + <xsl:choose> + <xsl:when test=" $return_value < 0 "> + <xsl:value-of select=" '0' "/> + </xsl:when> + <xsl:otherwise> + <xsl:value-of select="$return_value"/> + </xsl:otherwise> + </xsl:choose> + </xsl:otherwise> + </xsl:choose> + </xsl:when> + <xsl:when test="$TargetTruncate = 'positive' "> + <xsl:choose> + <xsl:when test="string(number($TargetMeasure)) = 'NaN' "> + <xsl:value-of select=" '1' "/> + </xsl:when> + <xsl:otherwise> + <xsl:choose> + <xsl:when test=" $return_value <= 0 "> + <xsl:value-of select=" '1' "/> + </xsl:when> + <xsl:otherwise> + <xsl:value-of select="$return_value"/> + </xsl:otherwise> + </xsl:choose> + </xsl:otherwise> + </xsl:choose> + </xsl:when> + </xsl:choose> + </xsl:template> + <xsl:template name="Add-With-Measure"> + <xsl:param name="value1"/> + <xsl:param name="value2"/> + <xsl:param name="TargetMeasure" select="'in'"/> + <xsl:variable name="number-value1"> + <xsl:call-template name="ConvertMeasure"> + <xsl:with-param name="value" select="$value1"/> + <xsl:with-param name="TargetMeasure" select="$TargetMeasure"/> + </xsl:call-template> + </xsl:variable> + <xsl:variable name="number-value2"> + <xsl:call-template name="ConvertMeasure"> + <xsl:with-param name="value" select="$value2"/> + <xsl:with-param name="TargetMeasure" select="$TargetMeasure"/> + </xsl:call-template> + </xsl:variable> + <xsl:value-of select="$number-value1 + $number-value2"/> + </xsl:template> +</xsl:stylesheet> |