diff options
Diffstat (limited to '')
-rw-r--r-- | include/osl/pipe.h | 127 | ||||
-rw-r--r-- | include/osl/pipe.hxx | 224 |
2 files changed, 351 insertions, 0 deletions
diff --git a/include/osl/pipe.h b/include/osl/pipe.h new file mode 100644 index 000000000..f8835428d --- /dev/null +++ b/include/osl/pipe.h @@ -0,0 +1,127 @@ +/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ +/* + * This file is part of the LibreOffice project. + * + * This Source Code Form is subject to the terms of the Mozilla Public + * License, v. 2.0. If a copy of the MPL was not distributed with this + * file, You can obtain one at http://mozilla.org/MPL/2.0/. + * + * This file incorporates work covered by the following license notice: + * + * Licensed to the Apache Software Foundation (ASF) under one or more + * contributor license agreements. See the NOTICE file distributed + * with this work for additional information regarding copyright + * ownership. The ASF licenses this file to you under the Apache + * License, Version 2.0 (the "License"); you may not use this file + * except in compliance with the License. You may obtain a copy of + * the License at http://www.apache.org/licenses/LICENSE-2.0 . + */ + +/* + * This file is part of LibreOffice published API. + */ + +#ifndef INCLUDED_OSL_PIPE_H +#define INCLUDED_OSL_PIPE_H + +#include "sal/config.h" + +#include "osl/security.h" +#include "rtl/ustring.h" +#include "sal/saldllapi.h" + +#ifdef __cplusplus +extern "C" { +#endif + +typedef enum { + osl_Pipe_E_None, /*< no error */ + osl_Pipe_E_NotFound, /*< Pipe could not be found */ + osl_Pipe_E_AlreadyExists, /*< Pipe already exists */ + osl_Pipe_E_NoProtocol, /*< Protocol not available */ + osl_Pipe_E_NetworkReset, /*< Network dropped connection because of reset */ + osl_Pipe_E_ConnectionAbort, /*< Software caused connection abort */ + osl_Pipe_E_ConnectionReset, /*< Connection reset by peer */ + osl_Pipe_E_NoBufferSpace, /*< No buffer space available */ + osl_Pipe_E_TimedOut, /*< Connection timed out */ + osl_Pipe_E_ConnectionRefused, /*< Connection refused */ + osl_Pipe_E_invalidError, /*< unmapped error: always last entry in enum! */ + osl_Pipe_E_FORCE_EQUAL_SIZE = SAL_MAX_ENUM +} oslPipeError; + +/** Pipe creation options. + + A pipe can either be opened, or a new pipe can be created and opened. +*/ +typedef sal_uInt32 oslPipeOptions; +#define osl_Pipe_OPEN 0x0000 /*< open existing pipe */ +#define osl_Pipe_CREATE 0x0001 /*< create pipe and open it, fails if already exists */ + +typedef struct oslPipeImpl * oslPipe; + +/** Create or open a pipe. + + @param[in] strPipeName pipe name + @param[in] Options create or open the pipe + @param[in] Security pipe creator + + @returns nullptr on failure, otherwise returns the pipe handle + + @see osl_closePipe +*/ +SAL_DLLPUBLIC oslPipe SAL_CALL osl_createPipe( + rtl_uString *strPipeName, oslPipeOptions Options, oslSecurity Security); + +/** Decreases the refcount of the pipe. + + If the refcount drops to zero, the handle is destroyed. + + @param[in] Pipe pipe handle + + @see osl_acquirePipe + */ +SAL_DLLPUBLIC void SAL_CALL osl_releasePipe(oslPipe Pipe); + +/** Increases the refcount of the pipe. + + @param[in] Pipe pipe handle + + @see osl_releasePipe + */ +SAL_DLLPUBLIC void SAL_CALL osl_acquirePipe(oslPipe Pipe); + +/** Close the pipe. + + Any read, write or accept actions stop immediately. + + @param[in] Pipe pipe handle + + @see osl_createPipe + */ +SAL_DLLPUBLIC void SAL_CALL osl_closePipe(oslPipe Pipe); + + +SAL_DLLPUBLIC oslPipe SAL_CALL osl_acceptPipe(oslPipe Pipe); + +SAL_DLLPUBLIC sal_Int32 SAL_CALL osl_sendPipe(oslPipe Pipe, const void* pBuffer, sal_Int32 BufferSize); +SAL_DLLPUBLIC sal_Int32 SAL_CALL osl_receivePipe(oslPipe Pipe, void* pBuffer, sal_Int32 BufferSize); + +/** Reads blocking from the pipe. + @return Number of read bytes. If less than BufferSize, the pipe was closed. + */ +SAL_DLLPUBLIC sal_Int32 SAL_CALL osl_readPipe( oslPipe Pipe, void *pBuffer, sal_Int32 BufferSize ); + +/** Writes blocking onto the pipe. + @return Number of written bytes. If less than BufferSize, the pipe was closed. + */ +SAL_DLLPUBLIC sal_Int32 SAL_CALL osl_writePipe( oslPipe Pipe, const void *pBuffer, sal_Int32 BufferSize ); + +SAL_DLLPUBLIC oslPipeError SAL_CALL osl_getLastPipeError(oslPipe Pipe); + +#ifdef __cplusplus +} +#endif + +#endif // INCLUDED_OSL_PIPE_H + +/* vim:set shiftwidth=4 softtabstop=4 expandtab: */ diff --git a/include/osl/pipe.hxx b/include/osl/pipe.hxx new file mode 100644 index 000000000..cb9e2ec24 --- /dev/null +++ b/include/osl/pipe.hxx @@ -0,0 +1,224 @@ +/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ +/* + * This file is part of the LibreOffice project. + * + * This Source Code Form is subject to the terms of the Mozilla Public + * License, v. 2.0. If a copy of the MPL was not distributed with this + * file, You can obtain one at http://mozilla.org/MPL/2.0/. + * + * This file incorporates work covered by the following license notice: + * + * Licensed to the Apache Software Foundation (ASF) under one or more + * contributor license agreements. See the NOTICE file distributed + * with this work for additional information regarding copyright + * ownership. The ASF licenses this file to you under the Apache + * License, Version 2.0 (the "License"); you may not use this file + * except in compliance with the License. You may obtain a copy of + * the License at http://www.apache.org/licenses/LICENSE-2.0 . + */ + +/* + * This file is part of LibreOffice published API. + */ +#ifndef INCLUDED_OSL_PIPE_HXX +#define INCLUDED_OSL_PIPE_HXX + +#include "sal/config.h" + +#include <cstddef> + +#include "osl/pipe_decl.hxx" + +namespace osl +{ + + inline Pipe::Pipe() + : m_handle( NULL ) + {} + + + inline Pipe::Pipe(const ::rtl::OUString& strName, oslPipeOptions Options ) + : m_handle( osl_createPipe( strName.pData, Options , NULL ) ) + {} + + + inline Pipe::Pipe(const ::rtl::OUString& strName, oslPipeOptions Options,const Security & rSecurity) + : m_handle( osl_createPipe( strName.pData, Options , rSecurity.getHandle() ) ) + {} + + + inline Pipe::Pipe(const Pipe& pipe ) + : m_handle( pipe.m_handle ) + { + if( m_handle ) + osl_acquirePipe( m_handle ); + } + +#if defined LIBO_INTERNAL_ONLY + Pipe::Pipe(Pipe && other) noexcept : m_handle(other.m_handle) { + other.m_handle = nullptr; + } +#endif + + inline Pipe::Pipe( oslPipe pipe, __sal_NoAcquire ) + : m_handle ( pipe ) + {} + + + inline Pipe::Pipe(oslPipe pipe) + : m_handle( pipe ) + { + if( m_handle ) + osl_acquirePipe( m_handle ); + } + + + inline Pipe::~Pipe() + { + if( m_handle ) + osl_releasePipe( m_handle ); + } + + + inline bool Pipe::create( const ::rtl::OUString & strName, + oslPipeOptions Options, const Security &rSec ) + { + *this = Pipe( strName, Options, rSec ); + return is(); + } + + + inline bool Pipe::create( const ::rtl::OUString & strName, oslPipeOptions Options ) + { + *this = Pipe( strName, Options ); + return is(); + } + + inline Pipe& SAL_CALL Pipe::operator= (const Pipe& pipe) + { + *this = pipe.getHandle(); + return *this; + } + +#if defined LIBO_INTERNAL_ONLY + Pipe & Pipe::operator =(Pipe && other) noexcept { + if (m_handle != nullptr) { + osl_releasePipe(m_handle); + } + m_handle = other.m_handle; + other.m_handle = nullptr; + return *this; + } +#endif + + inline Pipe & SAL_CALL Pipe::operator=( oslPipe pipe) + { + if( pipe ) + osl_acquirePipe( pipe ); + if( m_handle ) + osl_releasePipe( m_handle ); + m_handle = pipe; + return *this; + } + + + inline bool SAL_CALL Pipe::is() const + { + return m_handle != NULL; + } + + + inline bool SAL_CALL Pipe::operator==( const Pipe& rPipe ) const + { + return m_handle == rPipe.m_handle; + } + + + inline void SAL_CALL Pipe::close() + { + osl_closePipe( m_handle ); + } + + + inline void SAL_CALL Pipe::clear() + { + if( m_handle ) + { + osl_releasePipe( m_handle ); + m_handle = NULL; + } + } + + + inline oslPipeError SAL_CALL Pipe::accept(StreamPipe& Connection) + { + Connection = StreamPipe( osl_acceptPipe( m_handle ), SAL_NO_ACQUIRE); + if( Connection.is() ) + return osl_Pipe_E_None; + else + return getError(); + } + + + inline oslPipeError SAL_CALL Pipe::getError() const + { + return osl_getLastPipeError( NULL ); + } + + + inline oslPipe SAL_CALL Pipe::getHandle() const + { + return m_handle; + } + + + inline StreamPipe::StreamPipe(){} + + + inline StreamPipe::StreamPipe(oslPipe hPipe) + : Pipe( hPipe ) + { + } + + + inline StreamPipe::StreamPipe(const ::rtl::OUString& strName, oslPipeOptions Options, const Security &rSec ) + : Pipe( strName, Options , rSec ) + {} + + + inline StreamPipe::StreamPipe(const ::rtl::OUString& strName, oslPipeOptions Options ) + : Pipe( strName, Options ) + {} + + inline StreamPipe::StreamPipe( oslPipe pipe, __sal_NoAcquire noacquire ) + : Pipe( pipe , noacquire ) + {} + + + inline sal_Int32 SAL_CALL StreamPipe::read(void* pBuffer, sal_Int32 n) const + { + return osl_readPipe( m_handle, pBuffer, n ); + } + + + inline sal_Int32 SAL_CALL StreamPipe::write(const void* pBuffer, sal_Int32 n) const + { + return osl_writePipe( m_handle, pBuffer , n ); + } + + + inline sal_Int32 SAL_CALL StreamPipe::recv(void* pBuffer, sal_Int32 BytesToRead) const + { + return osl_receivePipe( m_handle, pBuffer , BytesToRead ); + } + + + inline sal_Int32 SAL_CALL StreamPipe::send(const void* pBuffer, sal_Int32 BytesToSend) const + { + return osl_sendPipe( m_handle, pBuffer , BytesToSend ); + } + +} +#endif + +/* vim:set shiftwidth=4 softtabstop=4 expandtab: */ |