summaryrefslogtreecommitdiffstats
path: root/odk/examples/DevelopersGuide/GUI/UnoDialogSample2.java
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--odk/examples/DevelopersGuide/GUI/UnoDialogSample2.java263
1 files changed, 263 insertions, 0 deletions
diff --git a/odk/examples/DevelopersGuide/GUI/UnoDialogSample2.java b/odk/examples/DevelopersGuide/GUI/UnoDialogSample2.java
new file mode 100644
index 000000000..3e38886a1
--- /dev/null
+++ b/odk/examples/DevelopersGuide/GUI/UnoDialogSample2.java
@@ -0,0 +1,263 @@
+/* -*- Mode: Java; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*************************************************************************
+ *
+ * The Contents of this file are made available subject to the terms of
+ * the BSD license.
+ *
+ * Copyright 2000, 2010 Oracle and/or its affiliates.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of Sun Microsystems, Inc. nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+ * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+ * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *************************************************************************/
+import com.sun.star.awt.PushButtonType;
+import com.sun.star.awt.XDialog;
+import com.sun.star.awt.XListBox;
+import com.sun.star.beans.MethodConcept;
+import com.sun.star.beans.Property;
+import com.sun.star.beans.PropertyValue;
+import com.sun.star.beans.XIntrospection;
+import com.sun.star.beans.XIntrospectionAccess;
+import com.sun.star.beans.XMultiPropertySet;
+import com.sun.star.frame.XComponentLoader;
+import com.sun.star.lang.XMultiComponentFactory;
+import com.sun.star.lang.XServiceInfo;
+import com.sun.star.lang.XTypeProvider;
+import com.sun.star.reflection.XIdlMethod;
+import com.sun.star.uno.Type;
+import com.sun.star.uno.UnoRuntime;
+import com.sun.star.uno.XComponentContext;
+
+public class UnoDialogSample2 extends UnoDialogSample {
+ XIntrospectionAccess m_xIntrospectionAccess = null;
+ Object m_oUnoObject = null;
+ // define some constants used to set positions and sizes
+ // of controls. For further information see
+ // http://ui.openoffice.org/knowledge/DialogSpecificationandGuidelines.odt
+ static final int nFixedTextHeight = 8;
+ static final int nControlMargin = 6;
+ static final int nDialogWidth = 250;
+ static final int nDialogHeight = 140;
+ // the default roadmap width == 80 MAPs
+ static final int nRoadmapWidth = 80;
+ static final int nButtonHeight = 14;
+ static final int nButtonWidth = 50;
+
+
+ public UnoDialogSample2(XComponentContext _xContext, XMultiComponentFactory _xMCF, Object _oUnoObject) {
+ super(_xContext, _xMCF);
+ try {
+ m_oUnoObject = _oUnoObject;
+ Object o = m_xMCF.createInstanceWithContext("com.sun.star.beans.Introspection", m_xContext);
+ XIntrospection xIntrospection = UnoRuntime.queryInterface(XIntrospection.class, o );
+ // the variable m_xIntrospectionAccess offers functionality to access all methods and properties
+ // of a variable
+ m_xIntrospectionAccess = xIntrospection.inspect(_oUnoObject);
+ } catch (com.sun.star.uno.Exception ex) {
+ ex.printStackTrace();
+ }
+ }
+
+ public static void main(String args[]) {
+ UnoDialogSample2 oUnoDialogSample2 = null;
+ try {
+ XComponentContext xContext = com.sun.star.comp.helper.Bootstrap.bootstrap();
+ if(xContext != null )
+ System.out.println("Connected to a running office ...");
+ XMultiComponentFactory xMCF = xContext.getServiceManager();
+ PropertyValue[] aPropertyValues = new PropertyValue[]{};
+ // create an arbitrary Uno-Object - in this case an empty writer document...
+ Object oDesktop =xMCF.createInstanceWithContext("com.sun.star.frame.Desktop", xContext);
+ XComponentLoader xComponentLoader = UnoRuntime.queryInterface(XComponentLoader.class, oDesktop);
+ Object oUnoObject = xComponentLoader.loadComponentFromURL("private:factory/swriter", "_default", 0, aPropertyValues);
+
+ // define some coordinates where to position the controls
+ final int nButtonPosX = (nDialogWidth/2) - (nButtonWidth/2);
+ final int nButtonPosY = nDialogHeight - nButtonHeight - nControlMargin;
+ final int nControlPosX = nRoadmapWidth + 2*nControlMargin;
+ final int nControlWidth = nDialogWidth - 3*nControlMargin - nRoadmapWidth;
+ final int nListBoxHeight = nDialogHeight - 4*nControlMargin - nButtonHeight;
+ oUnoDialogSample2 = new UnoDialogSample2(xContext, xMCF, oUnoObject);
+ oUnoDialogSample2.initialize( new String[] {"Height", "Moveable", "Name","PositionX","PositionY", "Step", "TabIndex","Title","Width"},
+ new Object[] { Integer.valueOf(nDialogHeight), Boolean.TRUE, "Dialog1", Integer.valueOf(102),Integer.valueOf(41), Integer.valueOf(1), Short.valueOf((short) 0), "Inspect a Uno-Object", Integer.valueOf(nDialogWidth)});
+ String sIntroLabel = "This Dialog lists information about a given Uno-Object.\nIt offers a view to inspect all supported servicenames, exported interfaces, methods and properties.";
+ oUnoDialogSample2.insertMultiLineFixedText(nControlPosX, 27, nControlWidth, 4, 1, sIntroLabel);
+ // get the data from the UNO object...
+ String[] sSupportedServiceNames = oUnoDialogSample2.getSupportedServiceNames();
+ String[] sInterfaceNames = oUnoDialogSample2.getExportedInterfaceNames();
+ String[] sMethodNames = oUnoDialogSample2.getMethodNames();
+ String[] sPropertyNames = oUnoDialogSample2.getPropertyNames();
+ // add controls to the dialog...
+ oUnoDialogSample2.insertListBox(nControlPosX, nControlMargin, nListBoxHeight, nControlWidth, 2, sSupportedServiceNames);
+ oUnoDialogSample2.insertListBox(nControlPosX, nControlMargin, nListBoxHeight, nControlWidth, 3, sInterfaceNames);
+ oUnoDialogSample2.insertListBox(nControlPosX, nControlMargin, nListBoxHeight, nControlWidth, 4, sMethodNames);
+ oUnoDialogSample2.insertListBox(nControlPosX, nControlMargin, nListBoxHeight, nControlWidth, 5, sPropertyNames);
+ oUnoDialogSample2.insertButton(oUnoDialogSample2, nButtonPosX, nButtonPosY, nButtonWidth, "~Close", (short) PushButtonType.OK_value);
+ oUnoDialogSample2.insertHorizontalFixedLine(0, nButtonPosY - nControlMargin - 4, nDialogWidth, "");
+ // create the windowpeer;
+ // it must be kept in mind that it must be created after the insertion of the controls
+ // (see http://qa.openoffice.org/issues/show_bug.cgi?id=75129)
+ oUnoDialogSample2.createWindowPeer();
+ // add the roadmap control. Note that the roadmap may not be created before the windowpeer of the dialog exists
+ // (see http://qa.openoffice.org/issues/show_bug.cgi?id=67369)
+ oUnoDialogSample2.addRoadmap();
+ oUnoDialogSample2.insertRoadmapItem(0, true, "Introduction", 1);
+ oUnoDialogSample2.insertRoadmapItem(1, true, "Supported Services", 2);
+ oUnoDialogSample2.insertRoadmapItem(2, true, "Interfaces", 3);
+ oUnoDialogSample2.insertRoadmapItem(3, true, "Methods", 4);
+ oUnoDialogSample2.insertRoadmapItem(4, true, "Properties", 5);
+ oUnoDialogSample2.m_xRMPSet.setPropertyValue("CurrentItemID", Short.valueOf((short) 1));
+ oUnoDialogSample2.m_xRMPSet.setPropertyValue("Complete", Boolean.TRUE);
+ oUnoDialogSample2.xDialog = UnoRuntime.queryInterface(XDialog.class, oUnoDialogSample2.m_xDialogControl);
+ oUnoDialogSample2.xDialog.execute();
+ }catch( Exception ex ) {
+ ex.printStackTrace(System.err);
+ }
+ finally{
+ //make sure always to dispose the component and free the memory!
+ if (oUnoDialogSample2 != null){
+ if (oUnoDialogSample2.m_xComponent != null){
+ oUnoDialogSample2.m_xComponent.dispose();
+ }
+ }
+ }
+
+ System.exit( 0 );
+ }
+
+
+ public String[] getMethodNames() {
+ String[] sMethodNames = new String[]{};
+ try {
+ XIdlMethod[] xIdlMethods = m_xIntrospectionAccess.getMethods(MethodConcept.ALL);
+ sMethodNames = new String[xIdlMethods.length];
+ for (int i = 0; i < xIdlMethods.length; i++){
+ sMethodNames[i] = xIdlMethods[i].getName();
+ }
+ }
+ catch( Exception e ) {
+ System.err.println( e );
+ }
+ return sMethodNames;
+ }
+
+ // returns the names of all supported servicenames of a UNO object
+ public String[] getSupportedServiceNames() {
+ String[] sSupportedServiceNames = new String[]{};
+ // If the Uno-Object supports "com.sun.star.lang.XServiceInfo"
+ // this will give access to all supported servicenames
+ XServiceInfo xServiceInfo = UnoRuntime.queryInterface( XServiceInfo.class, m_oUnoObject);
+ if ( xServiceInfo != null ) {
+ sSupportedServiceNames = xServiceInfo.getSupportedServiceNames();
+ }
+ return sSupportedServiceNames;
+ }
+
+ // returns the names of all properties of a UNO object
+ protected String[] getPropertyNames() {
+ String[] sPropertyNames = new String[]{};
+ try {
+ Property[] aProperties = m_xIntrospectionAccess.getProperties(com.sun.star.beans.PropertyConcept.ATTRIBUTES + com.sun.star.beans.PropertyConcept.PROPERTYSET);
+ sPropertyNames = new String[aProperties.length];
+ for (int i = 0; i < aProperties.length; i++){
+ sPropertyNames[i] = aProperties[i].Name;
+ }
+ }
+ catch( Exception e ) {
+ System.err.println( e );
+ }
+ return sPropertyNames;
+ }
+
+
+ // returns the names of all exported interfaces of a UNO object
+ protected String[] getExportedInterfaceNames(){
+ Type[] aTypes = new Type[]{};
+ String[] sTypeNames = new String[]{};
+ // The XTypeProvider interfaces offers access to all exported interfaces
+ XTypeProvider xTypeProvider = UnoRuntime.queryInterface( XTypeProvider.class, m_oUnoObject);
+ if ( xTypeProvider != null ) {
+ aTypes = xTypeProvider.getTypes();
+ sTypeNames = new String[aTypes.length];
+ for (int i = 0; i < aTypes.length - 1; i++){
+ sTypeNames[i] = aTypes[i].getTypeName();
+ }
+ }
+ return sTypeNames;
+ }
+
+
+
+ public XListBox insertListBox(int _nPosX, int _nPosY, int _nHeight, int _nWidth, int _nStep, String[] _sStringItemList) {
+ XListBox xListBox = null;
+ try{
+ // create a unique name by means of an own implementation...
+ String sName = createUniqueName(m_xDlgModelNameContainer, "ListBox");
+ // create a controlmodel at the multiservicefactory of the dialog model...
+ Object oListBoxModel = m_xMSFDialogModel.createInstance("com.sun.star.awt.UnoControlListBoxModel");
+ XMultiPropertySet xLBModelMPSet = UnoRuntime.queryInterface(XMultiPropertySet.class, oListBoxModel);
+ // Set the properties at the model - keep in mind to pass the property names in alphabetical order!
+ xLBModelMPSet.setPropertyValues(
+ new String[] {"Dropdown", "Height", "Name", "PositionX", "PositionY", "ReadOnly", "Step", "StringItemList", "Width" } ,
+ new Object[] {Boolean.FALSE, Integer.valueOf(_nHeight), sName, Integer.valueOf(_nPosX), Integer.valueOf(_nPosY), Boolean.TRUE, Integer.valueOf(_nStep), _sStringItemList, Integer.valueOf(_nWidth)});
+ m_xDlgModelNameContainer.insertByName(sName, xLBModelMPSet);
+ }catch (com.sun.star.uno.Exception ex) {
+ throw new java.lang.RuntimeException("cannot happen...", ex);
+ }
+ return xListBox;
+ }
+
+
+ public void insertMultiLineFixedText(int _nPosX, int _nPosY, int _nWidth, int _nLineCount, int _nStep, String _sLabel) {
+ try {
+ // create a unique name by means of an own implementation...
+ String sName = createUniqueName(m_xDlgModelNameContainer, "Label");
+ int nHeight = _nLineCount * nFixedTextHeight;
+ // create a controlmodel at the multiservicefactory of the dialog model...
+ Object oFTModel = m_xMSFDialogModel.createInstance("com.sun.star.awt.UnoControlFixedTextModel");
+ XMultiPropertySet xFTModelMPSet = UnoRuntime.queryInterface(XMultiPropertySet.class, oFTModel);
+ // Set the properties at the model - keep in mind to pass the property names in alphabetical order!
+ xFTModelMPSet.setPropertyValues(
+ new String[] {"Height", "Label", "MultiLine", "Name", "PositionX", "PositionY", "Step", "Width"},
+ new Object[] { Integer.valueOf(nHeight), _sLabel, Boolean.TRUE, sName, Integer.valueOf(_nPosX), Integer.valueOf(_nPosY), Integer.valueOf(_nStep), Integer.valueOf(_nWidth)});
+ // add the model to the NameContainer of the dialog model
+ m_xDlgModelNameContainer.insertByName(sName, oFTModel);
+ }catch (com.sun.star.uno.Exception ex){
+ /* perform individual exception handling here.
+ * Possible exception types are:
+ * com.sun.star.lang.IllegalArgumentException,
+ * com.sun.star.lang.WrappedTargetException,
+ * com.sun.star.container.ElementExistException,
+ * com.sun.star.beans.PropertyVetoException,
+ * com.sun.star.beans.UnknownPropertyException,
+ * com.sun.star.uno.Exception
+ */
+ ex.printStackTrace(System.err);
+ }
+ }
+
+}// end of class
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */