diff options
Diffstat (limited to '')
| -rw-r--r-- | oox/source/drawingml/lineproperties.cxx | 538 |
1 files changed, 538 insertions, 0 deletions
diff --git a/oox/source/drawingml/lineproperties.cxx b/oox/source/drawingml/lineproperties.cxx new file mode 100644 index 000000000..2d10e8287 --- /dev/null +++ b/oox/source/drawingml/lineproperties.cxx @@ -0,0 +1,538 @@ +/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ +/* + * This file is part of the LibreOffice project. + * + * This Source Code Form is subject to the terms of the Mozilla Public + * License, v. 2.0. If a copy of the MPL was not distributed with this + * file, You can obtain one at http://mozilla.org/MPL/2.0/. + * + * This file incorporates work covered by the following license notice: + * + * Licensed to the Apache Software Foundation (ASF) under one or more + * contributor license agreements. See the NOTICE file distributed + * with this work for additional information regarding copyright + * ownership. The ASF licenses this file to you under the Apache + * License, Version 2.0 (the "License"); you may not use this file + * except in compliance with the License. You may obtain a copy of + * the License at http://www.apache.org/licenses/LICENSE-2.0 . + */ + +#include <sal/config.h> + +#include <comphelper/sequence.hxx> +#include <drawingml/lineproperties.hxx> +#include <rtl/ustrbuf.hxx> +#include <osl/diagnose.h> +#include <com/sun/star/beans/NamedValue.hpp> +#include <com/sun/star/drawing/LineCap.hpp> +#include <com/sun/star/drawing/LineDash.hpp> +#include <com/sun/star/drawing/LineJoint.hpp> +#include <com/sun/star/drawing/LineStyle.hpp> +#include <com/sun/star/drawing/PolyPolygonBezierCoords.hpp> +#include <oox/drawingml/drawingmltypes.hxx> +#include <oox/drawingml/shapepropertymap.hxx> +#include <oox/helper/graphichelper.hxx> +#include <oox/token/tokens.hxx> + +using namespace ::com::sun::star; +using namespace ::com::sun::star::beans; +using namespace ::com::sun::star::drawing; + + +namespace oox::drawingml { + +namespace { + +void lclSetDashData( LineDash& orLineDash, sal_Int16 nDots, sal_Int32 nDotLen, + sal_Int16 nDashes, sal_Int32 nDashLen, sal_Int32 nDistance ) +{ + orLineDash.Dots = nDots; + orLineDash.DotLen = nDotLen; + orLineDash.Dashes = nDashes; + orLineDash.DashLen = nDashLen; + orLineDash.Distance = nDistance; +} + +/** Converts the specified preset dash to API dash. + */ +void lclConvertPresetDash(LineDash& orLineDash, sal_Int32 nPresetDash) +{ + switch( nPresetDash ) + { + case XML_dot: lclSetDashData( orLineDash, 1, 1, 0, 0, 3 ); break; + case XML_dash: lclSetDashData( orLineDash, 1, 4, 0, 0, 3 ); break; + case XML_dashDot: lclSetDashData( orLineDash, 1, 4, 1, 1, 3 ); break; + + case XML_lgDash: lclSetDashData( orLineDash, 1, 8, 0, 0, 3 ); break; + case XML_lgDashDot: lclSetDashData( orLineDash, 1, 8, 1, 1, 3 ); break; + case XML_lgDashDotDot: lclSetDashData( orLineDash, 1, 8, 2, 1, 3 ); break; + + case XML_sysDot: lclSetDashData( orLineDash, 1, 1, 0, 0, 1 ); break; + case XML_sysDash: lclSetDashData( orLineDash, 1, 3, 0, 0, 1 ); break; + case XML_sysDashDot: lclSetDashData( orLineDash, 1, 3, 1, 1, 1 ); break; + case XML_sysDashDotDot: lclSetDashData( orLineDash, 1, 3, 2, 1, 1 ); break; + + default: + OSL_FAIL( "lclConvertPresetDash - unsupported preset dash" ); + lclSetDashData( orLineDash, 1, 4, 0, 0, 3 ); + } + orLineDash.DotLen *= 100; + orLineDash.DashLen *= 100; + orLineDash.Distance *= 100; +} + +/** Converts the passed custom dash to API dash. rCustomDash should not be empty. + * We assume, that there exist only two length values and the distance is the same + * for all dashes. Other kind of dash stop sequences cannot be represented, neither + * in model nor in ODF. + */ +void lclConvertCustomDash(LineDash& orLineDash, const LineProperties::DashStopVector& rCustomDash) +{ + OSL_ASSERT(!rCustomDash.empty()); + // Assume all dash stops have the same sp values. + orLineDash.Distance = rCustomDash[0].second; + // First kind of dashes go to "Dots" + orLineDash.DotLen = rCustomDash[0].first; + orLineDash.Dots = 0; + for(const auto& rIt : rCustomDash) + { + if (rIt.first != orLineDash.DotLen) + break; + ++orLineDash.Dots; + } + // All others go to "Dashes", we cannot handle more than two kinds. + orLineDash.Dashes = rCustomDash.size() - orLineDash.Dots; + if (orLineDash.Dashes > 0) + orLineDash.DashLen = rCustomDash[orLineDash.Dots].first; + else + orLineDash.DashLen = 0; + + // convert to API, e.g. 123% is 123000 in MS Office and 123 in our API + orLineDash.DotLen = orLineDash.DotLen / 1000; + orLineDash.DashLen = orLineDash.DashLen / 1000; + orLineDash.Distance = orLineDash.Distance / 1000; +} + +/** LibreOffice uses value 0, if a length attribute is missing in the + * style definition, but treats it as 100%. + * LibreOffice uses absolute values in some style definitions. Try to + * reconstruct them from the imported relative values. + */ +void lclRecoverStandardDashStyles(LineDash& orLineDash, sal_Int32 nLineWidth) +{ + sal_uInt16 nDots = orLineDash.Dots; + sal_uInt16 nDashes = orLineDash.Dashes; + sal_uInt32 nDotLen = orLineDash.DotLen; + sal_uInt32 nDashLen = orLineDash.DashLen; + sal_uInt32 nDistance = orLineDash.Distance; + // Use same ersatz for hairline as in export. + double fWidthHelp = nLineWidth == 0 ? 26.95/100.0 : nLineWidth / 100.0; + // start with (var) cases, because they have no rounding problems + // "Fine Dashed", "Line Style 9" and "Dashed (var)" need no recover + if (nDots == 3 && nDotLen == 197 &&nDashes == 3 && nDashLen == 100 && nDistance == 100) + { // "3 Dashes 3 Dots (var)" + orLineDash.DashLen = 0; + } + else if (nDots == 1 && nDotLen == 100 && nDashes == 0 && nDistance == 50) + { // "Ultrafine Dotted (var)" + orLineDash.DotLen = 0; + } + else if (nDots == 2 && nDashes == 0 && nDotLen == nDistance + && std::abs(nDistance * fWidthHelp - 51.0) < fWidthHelp) + { // "Ultrafine Dashed" + orLineDash.Dots = 1; + orLineDash.DotLen = 51; + orLineDash.Dashes = 1; + orLineDash.DashLen = 51; + orLineDash.Distance = 51; + orLineDash.Style = orLineDash.Style == DashStyle_ROUNDRELATIVE ? DashStyle_ROUND : DashStyle_RECT; + } + else if (nDots == 2 && nDashes == 3 && std::abs(nDotLen * fWidthHelp - 51.0) < fWidthHelp + && std::abs(nDashLen * fWidthHelp - 254.0) < fWidthHelp + && std::abs(nDistance * fWidthHelp - 127.0) < fWidthHelp) + { // "Ultrafine 2 Dots 3 Dashes" + orLineDash.DotLen = 51; + orLineDash.DashLen = 254; + orLineDash.Distance = 127; + orLineDash.Style = orLineDash.Style == DashStyle_ROUNDRELATIVE ? DashStyle_ROUND : DashStyle_RECT; + } + else if (nDots == 1 && nDotLen == 100 && nDashes == 0 + && std::abs(nDistance * fWidthHelp - 457.0) < fWidthHelp) + { // "Fine Dotted" + orLineDash.DotLen = 0; + orLineDash.Distance = 457; + orLineDash.Style = orLineDash.Style == DashStyle_ROUNDRELATIVE ? DashStyle_ROUND : DashStyle_RECT; + } + else if (nDots == 1 && nDashes == 10 && nDashLen == 100 + && std::abs(nDistance * fWidthHelp - 152.0) < fWidthHelp) + { // "Line with Fine Dots" + orLineDash.DotLen = 2007; + orLineDash.DashLen = 0; + orLineDash.Distance = 152; + orLineDash.Style = orLineDash.Style == DashStyle_ROUNDRELATIVE ? DashStyle_ROUND : DashStyle_RECT; + } + else if (nDots == 2 && nDotLen == 100 && nDashes == 1 && nDashLen == nDistance + && std::abs(nDistance * fWidthHelp - 203.0) < fWidthHelp) + { // "2 Dots 1 Dash" + orLineDash.DotLen = 0; + orLineDash.DashLen = 203; + orLineDash.Distance = 203; + orLineDash.Style = orLineDash.Style == DashStyle_ROUNDRELATIVE ? DashStyle_ROUND : DashStyle_RECT; + } +} + +DashStyle lclGetDashStyle( sal_Int32 nToken ) +{ + OSL_ASSERT((nToken & sal_Int32(0xFFFF0000))==0); + // MS Office dashing is always relative to line width + switch( nToken ) + { + case XML_rnd: return DashStyle_ROUNDRELATIVE; + case XML_sq: return DashStyle_RECTRELATIVE; // default in OOXML + case XML_flat: return DashStyle_RECTRELATIVE; // default in MS Office + } + return DashStyle_RECTRELATIVE; +} + +LineCap lclGetLineCap( sal_Int32 nToken ) +{ + OSL_ASSERT((nToken & sal_Int32(0xFFFF0000))==0); + switch( nToken ) + { + case XML_rnd: return LineCap_ROUND; + case XML_sq: return LineCap_SQUARE; // default in OOXML + case XML_flat: return LineCap_BUTT; // default in MS Office + } + return LineCap_BUTT; +} + +LineJoint lclGetLineJoint( sal_Int32 nToken ) +{ + OSL_ASSERT((nToken & sal_Int32(0xFFFF0000))==0); + switch( nToken ) + { + case XML_round: return LineJoint_ROUND; + case XML_bevel: return LineJoint_BEVEL; + case XML_miter: return LineJoint_MITER; + } + return LineJoint_ROUND; +} + +const sal_Int32 OOX_ARROWSIZE_SMALL = 0; +const sal_Int32 OOX_ARROWSIZE_MEDIUM = 1; +const sal_Int32 OOX_ARROWSIZE_LARGE = 2; + +sal_Int32 lclGetArrowSize( sal_Int32 nToken ) +{ + OSL_ASSERT((nToken & sal_Int32(0xFFFF0000))==0); + switch( nToken ) + { + case XML_sm: return OOX_ARROWSIZE_SMALL; + case XML_med: return OOX_ARROWSIZE_MEDIUM; + case XML_lg: return OOX_ARROWSIZE_LARGE; + } + return OOX_ARROWSIZE_MEDIUM; +} + +void lclPushMarkerProperties( ShapePropertyMap& rPropMap, + const LineArrowProperties& rArrowProps, sal_Int32 nLineWidth, bool bLineEnd ) +{ + /* Store the marker polygon and the marker name in a single value, to be + able to pass both to the ShapePropertyMap::setProperty() function. */ + NamedValue aNamedMarker; + + OUStringBuffer aBuffer; + sal_Int32 nMarkerWidth = 0; + bool bMarkerCenter = false; + sal_Int32 nArrowType = rArrowProps.moArrowType.get( XML_none ); + OSL_ASSERT((nArrowType & sal_Int32(0xFFFF0000))==0); + switch( nArrowType ) + { + case XML_triangle: + aBuffer.append( "msArrowEnd" ); + break; + case XML_arrow: + aBuffer.append( "msArrowOpenEnd" ); + break; + case XML_stealth: + aBuffer.append( "msArrowStealthEnd" ); + break; + case XML_diamond: + aBuffer.append( "msArrowDiamondEnd" ); + bMarkerCenter = true; + break; + case XML_oval: + aBuffer.append( "msArrowOvalEnd" ); + bMarkerCenter = true; + break; + } + + if( !aBuffer.isEmpty() ) + { + bool bIsArrow = nArrowType == XML_arrow; + sal_Int32 nLength = lclGetArrowSize( rArrowProps.moArrowLength.get( XML_med ) ); + sal_Int32 nWidth = lclGetArrowSize( rArrowProps.moArrowWidth.get( XML_med ) ); + + sal_Int32 nNameIndex = nWidth * 3 + nLength + 1; + aBuffer.append( ' ' ).append( nNameIndex ); + if (bIsArrow) + { + // Arrow marker form depends also on line width + aBuffer.append(' ').append(nLineWidth); + } + OUString aMarkerName = aBuffer.makeStringAndClear(); + + double fArrowLength = 1.0; + switch( nLength ) + { + case OOX_ARROWSIZE_SMALL: fArrowLength = (bIsArrow ? 2.5 : 2.0); break; + case OOX_ARROWSIZE_MEDIUM: fArrowLength = (bIsArrow ? 3.5 : 3.0); break; + case OOX_ARROWSIZE_LARGE: fArrowLength = (bIsArrow ? 5.5 : 5.0); break; + } + double fArrowWidth = 1.0; + switch( nWidth ) + { + case OOX_ARROWSIZE_SMALL: fArrowWidth = (bIsArrow ? 2.5 : 2.0); break; + case OOX_ARROWSIZE_MEDIUM: fArrowWidth = (bIsArrow ? 3.5 : 3.0); break; + case OOX_ARROWSIZE_LARGE: fArrowWidth = (bIsArrow ? 5.5 : 5.0); break; + } + // set arrow width relative to line width + sal_Int32 nBaseLineWidth = ::std::max< sal_Int32 >( nLineWidth, 70 ); + nMarkerWidth = static_cast<sal_Int32>( fArrowWidth * nBaseLineWidth ); + + /* Test if the marker already exists in the marker table, do not + create it again in this case. If markers are inserted explicitly + instead by their name, the polygon will be created always. + TODO: this can be optimized by using a map. */ + if( !rPropMap.hasNamedLineMarkerInTable( aMarkerName ) ) + { + // pass X and Y as percentage to OOX_ARROW_POINT + auto OOX_ARROW_POINT = [fArrowLength, fArrowWidth]( double x, double y ) { return awt::Point( static_cast< sal_Int32 >( fArrowWidth * x ), static_cast< sal_Int32 >( fArrowLength * y ) ); }; + // tdf#100491 Arrow line marker, unlike other markers, depends on line width. + // So calculate width of half line (more convenient during drawing) taking into account + // further conversions/scaling done in OOX_ARROW_POINT and scaling to nMarkerWidth. + const double fArrowLineHalfWidth = ::std::max< double >( 100.0 * 0.5 * nLineWidth / nMarkerWidth, 1 ); + + ::std::vector< awt::Point > aPoints; + OSL_ASSERT((rArrowProps.moArrowType.get() & sal_Int32(0xFFFF0000))==0); + switch( rArrowProps.moArrowType.get() ) + { + case XML_triangle: + aPoints.push_back( OOX_ARROW_POINT( 50, 0 ) ); + aPoints.push_back( OOX_ARROW_POINT( 100, 100 ) ); + aPoints.push_back( OOX_ARROW_POINT( 0, 100 ) ); + aPoints.push_back( OOX_ARROW_POINT( 50, 0 ) ); + break; + case XML_arrow: + aPoints.push_back( OOX_ARROW_POINT( 50, 0 ) ); + aPoints.push_back( OOX_ARROW_POINT( 100, 100 - fArrowLineHalfWidth * 1.5) ); + aPoints.push_back( OOX_ARROW_POINT( 100 - fArrowLineHalfWidth * 1.5, 100 ) ); + aPoints.push_back( OOX_ARROW_POINT( 50.0 + fArrowLineHalfWidth, 5.5 * fArrowLineHalfWidth) ); + aPoints.push_back( OOX_ARROW_POINT( 50.0 + fArrowLineHalfWidth, 100 ) ); + aPoints.push_back( OOX_ARROW_POINT( 50.0 - fArrowLineHalfWidth, 100 ) ); + aPoints.push_back( OOX_ARROW_POINT( 50.0 - fArrowLineHalfWidth, 5.5 * fArrowLineHalfWidth) ); + aPoints.push_back( OOX_ARROW_POINT( fArrowLineHalfWidth * 1.5, 100 ) ); + aPoints.push_back( OOX_ARROW_POINT( 0, 100 - fArrowLineHalfWidth * 1.5) ); + aPoints.push_back( OOX_ARROW_POINT( 50, 0 ) ); + break; + case XML_stealth: + aPoints.push_back( OOX_ARROW_POINT( 50, 0 ) ); + aPoints.push_back( OOX_ARROW_POINT( 100, 100 ) ); + aPoints.push_back( OOX_ARROW_POINT( 50, 60 ) ); + aPoints.push_back( OOX_ARROW_POINT( 0, 100 ) ); + aPoints.push_back( OOX_ARROW_POINT( 50, 0 ) ); + break; + case XML_diamond: + aPoints.push_back( OOX_ARROW_POINT( 50, 0 ) ); + aPoints.push_back( OOX_ARROW_POINT( 100, 50 ) ); + aPoints.push_back( OOX_ARROW_POINT( 50, 100 ) ); + aPoints.push_back( OOX_ARROW_POINT( 0, 50 ) ); + aPoints.push_back( OOX_ARROW_POINT( 50, 0 ) ); + break; + case XML_oval: + aPoints.push_back( OOX_ARROW_POINT( 50, 0 ) ); + aPoints.push_back( OOX_ARROW_POINT( 75, 7 ) ); + aPoints.push_back( OOX_ARROW_POINT( 93, 25 ) ); + aPoints.push_back( OOX_ARROW_POINT( 100, 50 ) ); + aPoints.push_back( OOX_ARROW_POINT( 93, 75 ) ); + aPoints.push_back( OOX_ARROW_POINT( 75, 93 ) ); + aPoints.push_back( OOX_ARROW_POINT( 50, 100 ) ); + aPoints.push_back( OOX_ARROW_POINT( 25, 93 ) ); + aPoints.push_back( OOX_ARROW_POINT( 7, 75 ) ); + aPoints.push_back( OOX_ARROW_POINT( 0, 50 ) ); + aPoints.push_back( OOX_ARROW_POINT( 7, 25 ) ); + aPoints.push_back( OOX_ARROW_POINT( 25, 7 ) ); + aPoints.push_back( OOX_ARROW_POINT( 50, 0 ) ); + break; + } + + OSL_ENSURE( !aPoints.empty(), "lclPushMarkerProperties - missing arrow coordinates" ); + if( !aPoints.empty() ) + { + PolyPolygonBezierCoords aMarkerCoords; + aMarkerCoords.Coordinates = { comphelper::containerToSequence( aPoints ) }; + + ::std::vector< PolygonFlags > aFlags( aPoints.size(), PolygonFlags_NORMAL ); + aMarkerCoords.Flags = { comphelper::containerToSequence( aFlags ) }; + + aNamedMarker.Name = aMarkerName; + aNamedMarker.Value <<= aMarkerCoords; + } + } + else + { + /* Named marker object exists already in the marker table, pass + its name only. This will set the name as property value, but + does not create a new object in the marker table. */ + aNamedMarker.Name = aMarkerName; + } + } + + // push the properties (filled aNamedMarker.Name indicates valid marker) + if( aNamedMarker.Name.isEmpty() ) + return; + + if( bLineEnd ) + { + rPropMap.setProperty( ShapeProperty::LineEnd, aNamedMarker ); + rPropMap.setProperty( ShapeProperty::LineEndWidth, nMarkerWidth ); + rPropMap.setProperty( ShapeProperty::LineEndCenter, bMarkerCenter ); + } + else + { + rPropMap.setProperty( ShapeProperty::LineStart, aNamedMarker ); + rPropMap.setProperty( ShapeProperty::LineStartWidth, nMarkerWidth ); + rPropMap.setProperty( ShapeProperty::LineStartCenter, bMarkerCenter ); + } +} + +} // namespace + +void LineArrowProperties::assignUsed( const LineArrowProperties& rSourceProps ) +{ + moArrowType.assignIfUsed( rSourceProps.moArrowType ); + moArrowWidth.assignIfUsed( rSourceProps.moArrowWidth ); + moArrowLength.assignIfUsed( rSourceProps.moArrowLength ); +} + +void LineProperties::assignUsed( const LineProperties& rSourceProps ) +{ + maStartArrow.assignUsed( rSourceProps.maStartArrow ); + maEndArrow.assignUsed( rSourceProps.maEndArrow ); + maLineFill.assignUsed( rSourceProps.maLineFill ); + if( !rSourceProps.maCustomDash.empty() ) + maCustomDash = rSourceProps.maCustomDash; + moLineWidth.assignIfUsed( rSourceProps.moLineWidth ); + moPresetDash.assignIfUsed( rSourceProps.moPresetDash ); + moLineCompound.assignIfUsed( rSourceProps.moLineCompound ); + moLineCap.assignIfUsed( rSourceProps.moLineCap ); + moLineJoint.assignIfUsed( rSourceProps.moLineJoint ); +} + +void LineProperties::pushToPropMap( ShapePropertyMap& rPropMap, + const GraphicHelper& rGraphicHelper, ::Color nPhClr ) const +{ + // line fill type must exist, otherwise ignore other properties + if( !maLineFill.moFillType.has() ) + return; + + // line style (our core only supports none and solid) + drawing::LineStyle eLineStyle = (maLineFill.moFillType.get() == XML_noFill) ? drawing::LineStyle_NONE : drawing::LineStyle_SOLID; + + // line width in 1/100mm + sal_Int32 nLineWidth = getLineWidth(); // includes conversion from EMUs to 1/100mm + rPropMap.setProperty( ShapeProperty::LineWidth, nLineWidth ); + + // line cap type + LineCap eLineCap = moLineCap.has() ? lclGetLineCap( moLineCap.get() ) : LineCap_BUTT; + if( moLineCap.has() ) + rPropMap.setProperty( ShapeProperty::LineCap, eLineCap ); + + // create line dash from preset dash token or dash stop vector (not for invisible line) + if( (eLineStyle != drawing::LineStyle_NONE) && (moPresetDash.differsFrom( XML_solid ) || !maCustomDash.empty()) ) + { + LineDash aLineDash; + aLineDash.Style = lclGetDashStyle( moLineCap.get( XML_flat ) ); + + if(moPresetDash.differsFrom(XML_solid)) + lclConvertPresetDash(aLineDash, moPresetDash.get(XML_dash)); + else // !maCustomDash.empty() + { + lclConvertCustomDash(aLineDash, maCustomDash); + lclRecoverStandardDashStyles(aLineDash, nLineWidth); + } + + // In MS Office (2020) for preset dash style line caps round and square are included in dash length. + // For custom dash style round line cap is included, square line cap is added. In ODF line caps are + // always added to dash length. Tweak the length accordingly. + if (eLineCap == LineCap_ROUND || (eLineCap == LineCap_SQUARE && maCustomDash.empty())) + { + // Cannot use -100 because that results in 0 length in some cases and + // LibreOffice interprets 0 length as 100%. + if (aLineDash.DotLen >= 100 || aLineDash.DashLen >= 100) + aLineDash.Distance += 99; + if (aLineDash.DotLen >= 100) + aLineDash.DotLen -= 99; + if (aLineDash.DashLen >= 100) + aLineDash.DashLen -= 99; + } + + if( rPropMap.setProperty( ShapeProperty::LineDash, aLineDash ) ) + eLineStyle = drawing::LineStyle_DASH; + } + + // set final line style property + rPropMap.setProperty( ShapeProperty::LineStyle, eLineStyle ); + + // line joint type + if( moLineJoint.has() ) + rPropMap.setProperty( ShapeProperty::LineJoint, lclGetLineJoint( moLineJoint.get() ) ); + + // line color and transparence + Color aLineColor = maLineFill.getBestSolidColor(); + if( aLineColor.isUsed() ) + { + rPropMap.setProperty( ShapeProperty::LineColor, aLineColor.getColor( rGraphicHelper, nPhClr ) ); + if( aLineColor.hasTransparency() ) + rPropMap.setProperty( ShapeProperty::LineTransparency, aLineColor.getTransparency() ); + } + + // line markers + lclPushMarkerProperties( rPropMap, maStartArrow, nLineWidth, false ); + lclPushMarkerProperties( rPropMap, maEndArrow, nLineWidth, true ); +} + +drawing::LineStyle LineProperties::getLineStyle() const +{ + // rules to calculate the line style inferred from the code in LineProperties::pushToPropMap + return (maLineFill.moFillType.get() == XML_noFill) ? + drawing::LineStyle_NONE : + (moPresetDash.differsFrom( XML_solid ) || (!moPresetDash && !maCustomDash.empty())) ? + drawing::LineStyle_DASH : + drawing::LineStyle_SOLID; +} + +drawing::LineCap LineProperties::getLineCap() const +{ + if( moLineCap.has() ) + return lclGetLineCap( moLineCap.get() ); + + return drawing::LineCap_BUTT; +} + +drawing::LineJoint LineProperties::getLineJoint() const +{ + if( moLineJoint.has() ) + return lclGetLineJoint( moLineJoint.get() ); + + return drawing::LineJoint_NONE; +} + +sal_Int32 LineProperties::getLineWidth() const +{ + return convertEmuToHmm( moLineWidth.get( 0 ) ); +} + +} // namespace oox + +/* vim:set shiftwidth=4 softtabstop=4 expandtab: */ |