summaryrefslogtreecommitdiffstats
path: root/oox/source/dump/dumperbase.ini
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--oox/source/dump/dumperbase.ini412
1 files changed, 412 insertions, 0 deletions
diff --git a/oox/source/dump/dumperbase.ini b/oox/source/dump/dumperbase.ini
new file mode 100644
index 000000000..efb42651f
--- /dev/null
+++ b/oox/source/dump/dumperbase.ini
@@ -0,0 +1,412 @@
+#
+# This file is part of the LibreOffice project.
+#
+# This Source Code Form is subject to the terms of the Mozilla Public
+# License, v. 2.0. If a copy of the MPL was not distributed with this
+# file, You can obtain one at http://mozilla.org/MPL/2.0/.
+#
+# This file incorporates work covered by the following license notice:
+#
+# Licensed to the Apache Software Foundation (ASF) under one or more
+# contributor license agreements. See the NOTICE file distributed
+# with this work for additional information regarding copyright
+# ownership. The ASF licenses this file to you under the Apache
+# License, Version 2.0 (the "License"); you may not use this file
+# except in compliance with the License. You may obtain a copy of
+# the License at http://www.apache.org/licenses/LICENSE-2.0 .
+#
+
+# dumper settings ============================================================
+#
+# Basic concepts
+#
+# - Character encoding of dumper ini files is UTF-8.
+# - Whitespace characters are generally stripped, e.g. at start and end of
+# lines, before/after equal signs, commas, etc.
+# - Comments start with the hash (#) or semicolon (;) character. Leading
+# whitespace characters are ignored.
+#
+# ----------------------------------------------------------------------------
+
+# Enable entire dumper (default=off). This option does not affect the option
+# 'enable-import'.
+# 0=off, 1=on
+enable-dumper=1
+
+# Enable import after dumping (default=on). Disabling this option allows
+# to dump a file without loading it. This option is independent from the
+# 'enable-dumper' option.
+# 0=off, 1=on
+enable-import=1
+
+# Maximum size of binary stream dumps (default=infinite).
+max-binary-stream-size=65536
+
+# Maximum size of binary data blocks in content dumps (default=infinite).
+max-binary-data-size=128
+
+# Shows unknown trailing data as binary dump (default=on).
+# 0=off, 1=on
+show-trailing-unknown=1
+
+# Shows the absolute stream position of records in the record header field
+# (default=on).
+# 0=off, 1=on
+show-record-position=0
+
+# name lists =================================================================
+#
+# Syntax descriptions
+#
+# - Optional items are enclosed in brackets [].
+# - Optional items that may be repeated are marked with an ellipsis (...).
+# - Items in a set to choose from are separated by vertical lines (|).
+# - <LISTNAME> denotes the name of a list. List names may consist of any non-
+# whitespace characters.
+# - <value>, <firstvalue>, <bitfield>, <bitmask> etc. denote integer values.
+# Decimal and hexadecimal notation is supported, using C/C++ notation.
+# - <bool> denotes a boolean value. Possible values are 0|1|false|true.
+# - <constname> denotes a literal name for a constant or bit.
+#
+# ----------------------------------------------------------------------------
+#
+# constlist
+#
+# Defines names for a list of specific values.
+#
+# Syntax:
+#
+# constlist = <LISTNAME>
+# default = <constname>
+# include = <LISTNAME>[,<LISTNAME>...]
+# exclude = <value>[,<value>...]
+# quote-names = <bool>
+# <value> = <constname>
+# end
+#
+# - default (optional): Declares <constname> as a default name for values not
+# specified in the name list. <constname> may be the empty string. If not
+# set, the literal string '?err:no-name' (unquoted) is the default name.
+# - include (optional): Includes the specified name list(s) into the own list.
+# - exclude (optional): Removes values from the name lists, useful e.g. after
+# a name list has been included.
+# - quote-names (optional): Specifies whether to return the contained names
+# enclosed in single quote (') characters. Default is false.
+#
+# The order of the declarations is important, later declarations may overwrite
+# names generated from earlier declarations.
+#
+# Example:
+#
+# constlist = EXAMPLE-CONSTLIST
+# 1 = my-value
+# include = OTHER-LIST
+# exclude = 2,3
+# 0x0004 = other-value
+# end
+#
+# - Defines the name 'my-value' for the constant 1.
+# - Includes 'OTHER-LIST' which may overwrite the name of the constant 1.
+# - Excludes the names of constants 2 and 3, which may have been included from
+# the name list 'OTHER-LIST'.
+# - Defines the name 'other-value' for the constant 4, which may overwrite the
+# name of this constant included from the name list 'OTHER-LIST'.
+#
+# ----------------------------------------------------------------------------
+#
+# multilist
+#
+# Defines names for contiguous ranges of values.
+#
+# Syntax:
+#
+# multilist = <LISTNAME>
+# default = <constname>
+# include = <LISTNAME>[,<LISTNAME>...]
+# exclude = <value>[,<value>...]
+# ignore-empty = <bool>
+# <firstvalue> = <constname>[,<constname>...]
+# end
+#
+# - default (optional): See constlist above.
+# - include (optional): See constlist above.
+# - exclude (optional): See constlist above.
+# - ignore-empty (optional): Specifies whether to skip empty names in a list.
+# - True = skips an empty entry, the default name will be generated.
+# - False = creates an empty string for the entry.
+# Default is true (skip empty entries).
+#
+# Examples:
+#
+# multilist = EXAMPLE-MULTILIST
+# 0 = value0,value1,,value3
+# 8 = value8
+# end
+#
+# - Defines the names 'value0' for the constant 0, 'value1' for the constant
+# 1, 'value3' for the constant 3, and 'value8' for the constant 8.
+#
+# multilist = EXAMPLE-MULTILIST-2
+# include = EXAMPLE-MULTILIST
+# ignore-empty = false
+# default = other
+# end
+#
+# - Same as example above (includes EXAMPLE-MULTILIST), but defines the empty
+# string for the constant 2. Other constants (less than 0 or greater than 3
+# and not equal to 8) get the default name 'other'.
+#
+# ----------------------------------------------------------------------------
+#
+# shortlist
+#
+# Defines names for a contiguous range of values. The entire list definition
+# is given in a single text line.
+#
+# Syntax:
+#
+# shortlist = <LISTNAME>,<firstvalue>,<constname>[,<constname>...]
+#
+# Uses default settings of the multi-list (i.e. skips empty entries).
+#
+# ----------------------------------------------------------------------------
+#
+# flagslist
+#
+# Defines names for single bits in a bit field.
+#
+# Syntax:
+#
+# flagslist = <LISTNAME>
+# include = <LISTNAME>[,<LISTNAME>...]
+# exclude = <bitfield>[,<bitfield>...]
+# ignore = <bitfield>
+# <bitmask> = <cname> | !<cname> | :<cname> | !<cname0>!<cname1>
+# end
+#
+# - include (optional): See constlist above.
+# - exclude (optional): See constlist above.
+# - ignore (optional): Specifies bits to be ignored. Bits without an explicit
+# name and not set in this declaration will be shown as unknown. Default is
+# to not ignore a bit.
+# - <bitmask>: The bit to be named. Must be a value with a single bit set.
+# - <cname> - Sets a name for the bit that will be shown if the bit is set.
+# Does not show anything if the bit is cleared.
+# - !<cname> - Sets a name for the bit that will be shown if the bit is
+# cleared. Does not show anything if the bit is set.
+# - :<cname> - Sets a name for the bit that will always be shown together
+# with the actual state of the bit, appended as ':on' or ':off'.
+# - !<cname0>!<cname1> - Sets a name for both the cleared bit (cname0), and
+# for the set bit (cname1).
+#
+# ----------------------------------------------------------------------------
+#
+# combilist
+#
+# Defines names for single bits and for embedded values in a bit field. This
+# is an extension of the flagslist described above.
+#
+# Syntax:
+#
+# combilist = <LISTNAME>
+# include = <LISTNAME>[,<LISTNAME>...]
+# exclude = <bitmask>[,<bitmask>...]
+# ignore = <bitfield>
+# <bitmask> = <cname> | !<cname> | :<cname> | !<cname0>!<cname1>
+# <bitfield> = <datatype>,<dataformat>,<bitfieldname>[,<LISTNAME>[,options...]]
+# end
+#
+# - include (optional): See constlist above.
+# - exclude (optional): See constlist above.
+# - ignore (optional): See flagslist above.
+# - <bitmask>: See flagslist above.
+# - <bitfield>: The mask of the embedded bitfield. Must be a value with
+# exactly one sequence of at least 2 consecutive bits.
+# - <datatype>: [u]int8 | [u]int16 | [u]int32 | [u]int64 | float | double
+# - <dataformat>: dec | hex | shorthex | bin | fix | bool
+# - <bitfieldname>: The name of the embedded bitfield.
+# - <LISTAME>: Optional name list with names for the values of the embedded
+# bitfield.
+# - options: Additional options for this bitfield:
+# - filter = <filterbitfield>~<filtervalue>: If set, the entire bitfield
+# will only be written, if the complete data item currently dumped
+# contains exactly the value specified in <filtervalue> in the bitfield
+# specified in <filterbitfield>. Otherwise, nothing is written. It is
+# possible to specify multiple filter rules for this bitfield. In that
+# case, the bitfield will be written, if at least one filter rule
+# applies for the current data item.
+# - noshift = <bool>: If set to 'true', the extracted value will be
+# shifted to the right (normalized). If set to 'false', the value will
+# be written unshifted. Default is 'true'.
+#
+# ----------------------------------------------------------------------------
+#
+# unitconverter
+#
+# Converts values and appends a unit name.
+#
+# Syntax:
+#
+# unitconverter = <LISTNAME>,[/]<factor>[,<unitname>]
+#
+# ----------------------------------------------------------------------------
+
+unitconverter=CONV-DEC,1
+unitconverter=CONV-PERCENT,1,%
+unitconverter=CONV-FLOAT-TO-PERC,100,%
+unitconverter=CONV-DEG,1,°
+unitconverter=CONV-HMM-TO-CM,/1000,cm
+unitconverter=CONV-INCH-TO-CM,2.54,cm
+unitconverter=CONV-PT-TO-CM,/28.346457,cm
+unitconverter=CONV-PT1616-TO-CM,/1857713.4,cm
+unitconverter=CONV-TWIP-TO-CM,/566.92913,cm
+unitconverter=CONV-TWIP-TO-PT,/20,pt
+unitconverter=CONV-EMU-TO-CM,/36000,cm
+
+constlist=BOOLEAN
+ 0=FALSE
+ default=TRUE
+end
+
+combilist=RK-FLAGS
+ 0x00000001=div-100
+ 0x00000002=integer
+ 0xFFFFFFFC=int32,hex,value
+end
+
+constlist=CHARSET
+ 0=win-1252-latin-1
+ 1=system-default
+ 2=symbol
+ 77=apple-roman
+ 128=win-932-japanese-shift-jis
+ 129=win-949-korean-hangul
+ 130=win-1361-korean-johab
+ 134=win-936-chinese-simplified-gbk
+ 136=win-950-chinese-traditional-big5
+ 161=win-1253-greek
+ 162=win-1254-turkish
+ 163=win-1258-vietnamese
+ 177=win-1255-hebrew
+ 178=win-1256-arabic
+ 186=win-1257-baltic
+ 204=win-1251-cyrillic
+ 222=win-874-thai
+ 238=win-1250-latin-2-central-european
+ 255=ibm-850-latin-1
+end
+
+combilist=FONT-PITCHFAMILY
+ 0x0F=uint8,dec,pitch,FONT-PITCH
+ 0xF0=uint8,dec,family,FONT-FAMILY
+end
+
+constlist=FONT-WEIGHT
+ 400=normal
+ 700=bold
+end
+
+shortlist=FONT-PITCH,0,unknown,fixed,variable
+shortlist=FONT-FAMILY,0,unknown,roman,swiss,modern,script,decorative
+
+constlist=CODEPAGES
+ 367=ascii
+ 437=ibm-437-us
+ 708=iso-8859-6
+ 720=ibm-720-arabic
+ 737=ibm-737-greek
+ 775=ibm-775-baltic
+ 850=ibm-850-latin-1
+ 852=ibm-852-latin-2-central-european
+ 855=ibm-855-cyrillic
+ 857=ibm-857-turkish
+ 858=ibm-858-multilingual-latin-1-with-euro
+ 860=ibm-860-portuguese
+ 861=ibm-861-icelandic
+ 862=ibm-862-hebrew
+ 863=ibm-863-canadian-french
+ 864=ibm-864-arabic
+ 865=ibm-865-nordic
+ 866=ibm-866-cyrillic-russian
+ 869=ibm-869-greek-modern
+ 874=win-874-thai
+ 932=win-932-japanese-shift-jis
+ 936=win-936-chinese-simplified-gbk
+ 949=win-949-korean-wansung
+ 950=win-950-chinese-traditional-big5
+ 1200=utf-16
+ 1250=win-1250-latin-2-central-european
+ 1251=win-1251-cyrillic
+ 1252=win-1252-latin-1
+ 1253=win-1253-greek
+ 1254=win-1254-turkish
+ 1255=win-1255-hebrew
+ 1256=win-1256-arabic
+ 1257=win-1257-baltic
+ 1258=win-1258-vietnamese
+ 1361=win-1361-korean-johab
+ 10000=apple-roman
+ 10001=apple-japanese
+ 10002=apple-chinese-traditional
+ 10003=apple-korean
+ 10004=apple-arabic
+ 10005=apple-hebrew
+ 10006=apple-greek
+ 10007=apple-cyrillic
+ 10008=apple-chinese-simplified
+ 10010=apple-romanian
+ 10017=apple-ukrainian
+ 10029=apple-central-european-with-euro
+ 10079=apple-icelandic
+ 10081=apple-turkish
+ 10082=apple-croatian
+ 20127=ascii
+ 20866=koi8-r
+ 21866=koi8-u
+ 28591=iso-8859-1
+ 28592=iso-8859-2
+ 28593=iso-8859-3
+ 28594=iso-8859-4
+ 28595=iso-8859-5
+ 28596=iso-8859-6
+ 28597=iso-8859-7
+ 28598=iso-8859-8
+ 28599=iso-8859-9
+ 28605=iso-8859-15
+ 32768=apple-romanian
+ 32769=win-1252-latin-1
+ 50220=iso-2022-jp
+ 50225=iso-2022-kr
+ 51932=euc-jp
+ 51936=euc-cn
+ 51949=euc-kr
+ 65000=utf-7
+ 65001=utf-8
+end
+
+multilist=COUNTRY
+ 1=usa,canada,latin-america,,,,russia
+ 20=egypt
+ 30=greece,netherlands,belgium,france,spain,,hungary,,,italy
+ 40=,switzerland,,austria,uk,denmark,sweden,norway,poland,germany
+ 50=,,mexico,,,brazil
+ 60=,australia,,,new-zealand,,thailand
+ 80=,japan,korea,,vietnam,,china
+ 90=turkey
+ 210=,,,algeria,,,morocco,,libya
+ 350=,portugal,,,iceland,,,,finland
+ 420=czech
+ 880=,,,,,,taiwan
+ 960=,lebanon,jordan,syria,iraq,kuwait,saudi-arabia
+ 970=,uae,israel,,qatar
+ 980=,iran
+end
+
+multilist=SYSTEMCOLOR
+ 0x00=scrollbar,desktop,active-title,inactive-title,menu,window-back,window-frame,menu-text
+ 0x08=window-text,active-title-text,active-border,inactive-border,app-workspace,highlight,highlight-text,button-face
+ 0x10=button-shadow,disabled-text,button-text,inactive-title-text,button-highlight,button-dark-shadow,button-light-shadow,tooltip-text
+ 0x18=tooltip-back,,hot-light,active-title-2,inactive-title-2,menu-highlight,menubar
+end
+
+# ============================================================================