summaryrefslogtreecommitdiffstats
path: root/oox/source/vml/vmlshape.cxx
diff options
context:
space:
mode:
Diffstat (limited to 'oox/source/vml/vmlshape.cxx')
-rw-r--r--oox/source/vml/vmlshape.cxx1574
1 files changed, 1574 insertions, 0 deletions
diff --git a/oox/source/vml/vmlshape.cxx b/oox/source/vml/vmlshape.cxx
new file mode 100644
index 000000000..31fbbade4
--- /dev/null
+++ b/oox/source/vml/vmlshape.cxx
@@ -0,0 +1,1574 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ * Licensed to the Apache Software Foundation (ASF) under one or more
+ * contributor license agreements. See the NOTICE file distributed
+ * with this work for additional information regarding copyright
+ * ownership. The ASF licenses this file to you under the Apache
+ * License, Version 2.0 (the "License"); you may not use this file
+ * except in compliance with the License. You may obtain a copy of
+ * the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+#include <algorithm>
+
+#include <optional>
+
+#include <o3tl/safeint.hxx>
+#include <oox/vml/vmlshape.hxx>
+#include <vcl/wmfexternal.hxx>
+
+#include <com/sun/star/beans/XPropertySet.hpp>
+#include <com/sun/star/drawing/EnhancedCustomShapeAdjustmentValue.hpp>
+#include <com/sun/star/drawing/FillStyle.hpp>
+#include <com/sun/star/drawing/PointSequenceSequence.hpp>
+#include <com/sun/star/drawing/PolyPolygonBezierCoords.hpp>
+#include <com/sun/star/drawing/TextVerticalAdjust.hpp>
+#include <com/sun/star/drawing/XEnhancedCustomShapeDefaulter.hpp>
+#include <com/sun/star/drawing/XShapes.hpp>
+#include <com/sun/star/drawing/XControlShape.hpp>
+#include <com/sun/star/graphic/XGraphic.hpp>
+#include <com/sun/star/table/BorderLine2.hpp>
+#include <com/sun/star/text/HoriOrientation.hpp>
+#include <com/sun/star/text/RelOrientation.hpp>
+#include <com/sun/star/text/SizeType.hpp>
+#include <com/sun/star/text/VertOrientation.hpp>
+#include <com/sun/star/text/WrapTextMode.hpp>
+#include <com/sun/star/lang/XServiceInfo.hpp>
+#include <com/sun/star/text/TextContentAnchorType.hpp>
+#include <com/sun/star/text/GraphicCrop.hpp>
+#include <com/sun/star/security/DocumentDigitalSignatures.hpp>
+#include <com/sun/star/security/XDocumentDigitalSignatures.hpp>
+#include <com/sun/star/text/WritingMode2.hpp>
+#include <com/sun/star/drawing/ColorMode.hpp>
+#include <sal/log.hxx>
+#include <oox/drawingml/shapepropertymap.hxx>
+#include <oox/helper/graphichelper.hxx>
+#include <oox/helper/propertyset.hxx>
+#include <oox/ole/axcontrol.hxx>
+#include <oox/ole/axcontrolfragment.hxx>
+#include <oox/ole/oleobjecthelper.hxx>
+#include <oox/token/properties.hxx>
+#include <oox/token/tokens.hxx>
+#include <oox/vml/vmldrawing.hxx>
+#include <oox/vml/vmlshapecontainer.hxx>
+#include <oox/vml/vmltextbox.hxx>
+#include <oox/core/xmlfilterbase.hxx>
+#include <oox/helper/containerhelper.hxx>
+#include <svx/EnhancedCustomShapeTypeNames.hxx>
+#include <svx/sdtagitm.hxx>
+#include <svx/svdobj.hxx>
+#include <comphelper/sequence.hxx>
+#include <comphelper/processfactory.hxx>
+#include <comphelper/propertyvalue.hxx>
+#include <comphelper/storagehelper.hxx>
+#include <o3tl/string_view.hxx>
+
+using ::com::sun::star::beans::XPropertySet;
+using ::com::sun::star::uno::Any;
+
+using namespace ::com::sun::star;
+using namespace ::com::sun::star::text;
+
+namespace oox::vml {
+
+using namespace ::com::sun::star::drawing;
+using namespace ::com::sun::star::graphic;
+using namespace ::com::sun::star::uno;
+using namespace ::com::sun::star::io;
+
+using ::oox::core::XmlFilterBase;
+
+namespace {
+
+const sal_Int32 VML_SHAPETYPE_PICTUREFRAME = 75;
+const sal_Int32 VML_SHAPETYPE_HOSTCONTROL = 201;
+
+awt::Point lclGetAbsPoint( const awt::Point& rRelPoint, const awt::Rectangle& rShapeRect, const awt::Rectangle& rCoordSys )
+{
+ double fWidthRatio = static_cast< double >( rShapeRect.Width ) / rCoordSys.Width;
+ double fHeightRatio = static_cast< double >( rShapeRect.Height ) / rCoordSys.Height;
+ awt::Point aAbsPoint;
+ aAbsPoint.X = static_cast< sal_Int32 >( rShapeRect.X + fWidthRatio * (rRelPoint.X - rCoordSys.X) + 0.5 );
+ aAbsPoint.Y = static_cast< sal_Int32 >( rShapeRect.Y + fHeightRatio * (rRelPoint.Y - rCoordSys.Y) + 0.5 );
+ return aAbsPoint;
+}
+
+awt::Rectangle lclGetAbsRect( const awt::Rectangle& rRelRect, const awt::Rectangle& rShapeRect, const awt::Rectangle& rCoordSys )
+{
+ double fWidthRatio = static_cast< double >( rShapeRect.Width ) / rCoordSys.Width;
+ double fHeightRatio = static_cast< double >( rShapeRect.Height ) / rCoordSys.Height;
+ awt::Rectangle aAbsRect;
+ aAbsRect.X = static_cast< sal_Int32 >( rShapeRect.X + fWidthRatio * (rRelRect.X - rCoordSys.X) + 0.5 );
+ aAbsRect.Y = static_cast< sal_Int32 >( rShapeRect.Y + fHeightRatio * (rRelRect.Y - rCoordSys.Y) + 0.5 );
+ aAbsRect.Width = static_cast< sal_Int32 >( fWidthRatio * rRelRect.Width + 0.5 );
+ aAbsRect.Height = static_cast< sal_Int32 >( fHeightRatio * rRelRect.Height + 0.5 );
+ return aAbsRect;
+}
+
+/// Count the crop value based on a crop fraction and a reference size.
+sal_Int32 lclConvertCrop(const OUString& rCrop, sal_uInt32 nSize)
+{
+ if (rCrop.endsWith("f"))
+ {
+ // Numeric value is specified in 1/65536-ths.
+ sal_uInt32 nCrop = o3tl::toUInt32(rCrop.subView(0, rCrop.getLength() - 1));
+ return (nCrop * nSize) / 65536;
+ }
+
+ return 0;
+}
+
+} // namespace
+
+ShapeTypeModel::ShapeTypeModel():
+ mbAutoHeight( false ),
+ mbVisible( true )
+{
+}
+
+void ShapeTypeModel::assignUsed( const ShapeTypeModel& rSource )
+{
+ moShapeType.assignIfUsed( rSource.moShapeType );
+ moCoordPos.assignIfUsed( rSource.moCoordPos );
+ moCoordSize.assignIfUsed( rSource.moCoordSize );
+ /* The style properties position, left, top, width, height, margin-left,
+ margin-top are not derived from shape template to shape. */
+ maStrokeModel.assignUsed( rSource.maStrokeModel );
+ maFillModel.assignUsed( rSource.maFillModel );
+ moGraphicPath.assignIfUsed( rSource.moGraphicPath );
+ moGraphicTitle.assignIfUsed( rSource.moGraphicTitle );
+}
+
+ShapeType::ShapeType( Drawing& rDrawing ) :
+ mrDrawing( rDrawing )
+{
+}
+
+ShapeType::~ShapeType()
+{
+}
+
+sal_Int32 ShapeType::getShapeType() const
+{
+ return maTypeModel.moShapeType.get( 0 );
+}
+
+OUString ShapeType::getGraphicPath() const
+{
+ return maTypeModel.moGraphicPath.get( OUString() );
+}
+
+awt::Rectangle ShapeType::getCoordSystem() const
+{
+ Int32Pair aCoordPos = maTypeModel.moCoordPos.get( Int32Pair( 0, 0 ) );
+ Int32Pair aCoordSize = maTypeModel.moCoordSize.get( Int32Pair( 1000, 1000 ) );
+ if( aCoordSize.first == 0 )
+ aCoordSize.first = 1;
+ if( aCoordSize.second == 0 )
+ aCoordSize.second = 1;
+ return awt::Rectangle( aCoordPos.first, aCoordPos.second, aCoordSize.first, aCoordSize.second );
+}
+
+awt::Rectangle ShapeType::getRectangle( const ShapeParentAnchor* pParentAnchor ) const
+{
+ return pParentAnchor ?
+ lclGetAbsRect( getRelRectangle(), pParentAnchor->maShapeRect, pParentAnchor->maCoordSys ) :
+ getAbsRectangle();
+}
+
+awt::Rectangle ShapeType::getAbsRectangle() const
+{
+ const GraphicHelper& rGraphicHelper = mrDrawing.getFilter().getGraphicHelper();
+
+ sal_Int32 nWidth = ConversionHelper::decodeMeasureToHmm( rGraphicHelper, maTypeModel.maWidth, 0, true, true );
+ if ( nWidth == 0 )
+ nWidth = 1;
+
+ sal_Int32 nHeight = ConversionHelper::decodeMeasureToHmm( rGraphicHelper, maTypeModel.maHeight, 0, false, true );
+ if ( nHeight == 0 )
+ nHeight = 1;
+
+ sal_Int32 nLeft;
+ if (o3tl::checked_add<sal_Int32>(ConversionHelper::decodeMeasureToHmm(rGraphicHelper, maTypeModel.maLeft, 0, true, true),
+ ConversionHelper::decodeMeasureToHmm(rGraphicHelper, maTypeModel.maMarginLeft, 0, true, true),
+ nLeft))
+ {
+ SAL_WARN("oox", "overflow in addition");
+ nLeft = 0;
+ }
+ if (nLeft == 0 && maTypeModel.maPosition == "absolute")
+ nLeft = 1;
+
+ return awt::Rectangle(
+ nLeft,
+ ConversionHelper::decodeMeasureToHmm( rGraphicHelper, maTypeModel.maTop, 0, false, true ) + ConversionHelper::decodeMeasureToHmm( rGraphicHelper, maTypeModel.maMarginTop, 0, false, true ),
+ nWidth, nHeight );
+}
+
+awt::Rectangle ShapeType::getRelRectangle() const
+{
+ sal_Int32 nWidth = maTypeModel.maWidth.toInt32();
+ if ( nWidth == 0 )
+ nWidth = 1;
+
+ sal_Int32 nHeight = maTypeModel.maHeight.toInt32();
+ if ( nHeight == 0 )
+ nHeight = 1;
+
+ return awt::Rectangle(
+ maTypeModel.maLeft.toInt32(),
+ maTypeModel.maTop.toInt32(),
+ nWidth, nHeight );
+}
+
+ClientData::ClientData() :
+ mnObjType( XML_TOKEN_INVALID ),
+ mnTextHAlign( XML_Left ),
+ mnTextVAlign( XML_Top ),
+ mnCol( -1 ),
+ mnRow( -1 ),
+ mnChecked( VML_CLIENTDATA_UNCHECKED ),
+ mnDropStyle( XML_Combo ),
+ mnDropLines( 1 ),
+ mnVal( 0 ),
+ mnMin( 0 ),
+ mnMax( 0 ),
+ mnInc( 0 ),
+ mnPage( 0 ),
+ mnSelType( XML_Single ),
+ mnVTEdit( VML_CLIENTDATA_TEXT ),
+ mbPrintObject( true ),
+ mbVisible( false ),
+ mbDde( false ),
+ mbNo3D( false ),
+ mbNo3D2( false ),
+ mbMultiLine( false ),
+ mbVScroll( false ),
+ mbSecretEdit( false )
+{
+}
+
+ShapeModel::ShapeModel()
+ : mbIsSignatureLine(false)
+ , mbSignatureLineShowSignDate(true)
+ , mbSignatureLineCanAddComment(false)
+ , mbInGroup(false)
+{
+}
+
+ShapeModel::~ShapeModel()
+{
+}
+
+TextBox& ShapeModel::createTextBox(ShapeTypeModel& rModel)
+{
+ mxTextBox.reset( new TextBox(rModel) );
+ return *mxTextBox;
+}
+
+ClientData& ShapeModel::createClientData()
+{
+ mxClientData.reset( new ClientData );
+ return *mxClientData;
+}
+
+ShapeBase::ShapeBase( Drawing& rDrawing ) :
+ ShapeType( rDrawing )
+{
+}
+
+void ShapeBase::finalizeFragmentImport()
+{
+ if( maShapeModel.maType.getLength() <= 1 )
+ return;
+
+ OUString aType = maShapeModel.maType;
+ if (aType[ 0 ] == '#')
+ aType = aType.copy(1);
+ if( const ShapeType* pShapeType = mrDrawing.getShapes().getShapeTypeById( aType ) )
+ {
+ // Make sure that the props from maTypeModel have priority over the props from
+ // the shape type.
+ StrokeModel aMergedStrokeModel;
+ aMergedStrokeModel.assignUsed(pShapeType->getTypeModel().maStrokeModel);
+ aMergedStrokeModel.assignUsed(maTypeModel.maStrokeModel);
+ FillModel aMergedFillModel;
+ aMergedFillModel.assignUsed(pShapeType->getTypeModel().maFillModel);
+ aMergedFillModel.assignUsed(maTypeModel.maFillModel);
+
+ maTypeModel.assignUsed( pShapeType->getTypeModel() );
+ maTypeModel.maStrokeModel = aMergedStrokeModel;
+ maTypeModel.maFillModel = aMergedFillModel;
+ }
+ else {
+ // Temporary fix, shapetype not found if referenced from different substream
+ // FIXME: extend scope of ShapeContainer to store all shapetypes from the document
+ static const OUStringLiteral sShapeTypePrefix = u"shapetype_";
+ OUString tmp;
+ if (aType.startsWith(sShapeTypePrefix)) {
+ maTypeModel.moShapeType = o3tl::toInt32(aType.subView(sShapeTypePrefix.getLength()));
+ }
+ else if (aType.startsWith("_x0000_t", &tmp)) {
+ maTypeModel.moShapeType = tmp.toInt32();
+ }
+ }
+}
+
+OUString ShapeBase::getShapeName() const
+{
+ if( !maTypeModel.maShapeName.isEmpty() )
+ return maTypeModel.maShapeName;
+
+ OUString aBaseName = mrDrawing.getShapeBaseName( *this );
+ if( !aBaseName.isEmpty() )
+ {
+ sal_Int32 nShapeIdx = mrDrawing.getLocalShapeIndex( getShapeId() );
+ if( nShapeIdx > 0 )
+ return aBaseName + OUStringChar(' ') + OUString::number( nShapeIdx );
+ }
+
+ return OUString();
+}
+
+const ShapeType* ShapeBase::getChildTypeById( const OUString& ) const
+{
+ return nullptr;
+}
+
+const ShapeBase* ShapeBase::getChildById( const OUString& ) const
+{
+ return nullptr;
+}
+
+Reference< XShape > ShapeBase::convertAndInsert( const Reference< XShapes >& rxShapes, const ShapeParentAnchor* pParentAnchor ) const
+{
+ Reference< XShape > xShape;
+ if( mrDrawing.isShapeSupported( *this ) )
+ {
+ /* Calculate shape rectangle. Applications may do something special
+ according to some imported shape client data (e.g. Excel cell anchor). */
+ awt::Rectangle aShapeRect = calcShapeRectangle( pParentAnchor );
+
+ if( ((aShapeRect.Width > 0) || (aShapeRect.Height > 0)) && rxShapes.is() )
+ {
+ xShape = implConvertAndInsert( rxShapes, aShapeRect );
+ if( xShape.is() )
+ {
+ // set imported or generated shape name (not supported by form controls)
+ PropertySet aShapeProp( xShape );
+ if( aShapeProp.hasProperty( PROP_Name ) )
+ aShapeProp.setProperty( PROP_Name, getShapeName() );
+ uno::Reference< lang::XServiceInfo > xSInfo( xShape, uno::UNO_QUERY_THROW );
+
+ OUString sLinkChainName = getTypeModel().maLegacyId;
+ sal_Int32 id = 0;
+ sal_Int32 idPos = sLinkChainName.indexOf("_x");
+ sal_Int32 seq = 0;
+ if (idPos >= 0)
+ {
+ sal_Int32 seqPos = sLinkChainName.indexOf("_s",idPos);
+ if (idPos < seqPos)
+ {
+ auto idPosEnd = idPos+2;
+ id = o3tl::toInt32(sLinkChainName.subView(idPosEnd, seqPos - idPosEnd));
+ seq = o3tl::toInt32(sLinkChainName.subView(seqPos+2));
+ }
+ }
+
+ OUString s_mso_next_textbox;
+ if( getTextBox() )
+ s_mso_next_textbox = getTextBox()->msNextTextbox;
+ if( s_mso_next_textbox.startsWith("#") )
+ s_mso_next_textbox = s_mso_next_textbox.copy(1);
+
+ if (xSInfo->supportsService("com.sun.star.text.TextFrame"))
+ {
+ uno::Reference<beans::XPropertySet> propertySet (xShape, uno::UNO_QUERY);
+ uno::Any aAny = propertySet->getPropertyValue("FrameInteropGrabBag");
+ auto aGrabBag = comphelper::sequenceToContainer< std::vector<beans::PropertyValue> >(aAny.get< uno::Sequence<beans::PropertyValue> >());
+
+ aGrabBag.push_back(comphelper::makePropertyValue("VML-Z-ORDER", maTypeModel.maZIndex.toInt32()));
+
+ if( !s_mso_next_textbox.isEmpty() )
+ aGrabBag.push_back(comphelper::makePropertyValue("mso-next-textbox", s_mso_next_textbox));
+
+ if( !sLinkChainName.isEmpty() )
+ {
+ aGrabBag.push_back(comphelper::makePropertyValue("TxbxHasLink", true));
+ aGrabBag.push_back(comphelper::makePropertyValue("Txbx-Id", id));
+ aGrabBag.push_back(comphelper::makePropertyValue("Txbx-Seq", seq));
+ aGrabBag.push_back(comphelper::makePropertyValue("LinkChainName", sLinkChainName));
+ }
+
+ if(!maTypeModel.maRotation.isEmpty())
+ aGrabBag.push_back(comphelper::makePropertyValue("mso-rotation-angle", ConversionHelper::decodeRotation(maTypeModel.maRotation).get()));
+ propertySet->setPropertyValue("FrameInteropGrabBag", uno::Any(comphelper::containerToSequence(aGrabBag)));
+ sal_Int32 backColorTransparency = 0;
+ propertySet->getPropertyValue("BackColorTransparency")
+ >>= backColorTransparency;
+ if (propertySet->getPropertyValue("FillStyle") == FillStyle_NONE &&
+ backColorTransparency == 100)
+ {
+ // If there is no fill, the Word default is 100% transparency.
+ propertySet->setPropertyValue("FillTransparence", Any(sal_Int16(100)));
+ }
+ }
+ else
+ {
+ if( maTypeModel.maZIndex.toInt32() )
+ {
+ uno::Sequence<beans::PropertyValue> aGrabBag;
+ uno::Reference<beans::XPropertySet> propertySet (xShape, uno::UNO_QUERY);
+ propertySet->getPropertyValue("InteropGrabBag") >>= aGrabBag;
+ sal_Int32 length;
+
+ length = aGrabBag.getLength();
+ aGrabBag.realloc( length+1 );
+ auto pGrabBag = aGrabBag.getArray();
+ pGrabBag[length].Name = "VML-Z-ORDER";
+ pGrabBag[length].Value <<= maTypeModel.maZIndex.toInt32();
+
+ if( !s_mso_next_textbox.isEmpty() )
+ {
+ length = aGrabBag.getLength();
+ aGrabBag.realloc( length+1 );
+ pGrabBag = aGrabBag.getArray();
+ pGrabBag[length].Name = "mso-next-textbox";
+ pGrabBag[length].Value <<= s_mso_next_textbox;
+ }
+
+ if( !sLinkChainName.isEmpty() )
+ {
+ length = aGrabBag.getLength();
+ aGrabBag.realloc( length+4 );
+ pGrabBag = aGrabBag.getArray();
+ pGrabBag[length].Name = "TxbxHasLink";
+ pGrabBag[length].Value <<= true;
+ pGrabBag[length+1].Name = "Txbx-Id";
+ pGrabBag[length+1].Value <<= id;
+ pGrabBag[length+2].Name = "Txbx-Seq";
+ pGrabBag[length+2].Value <<= seq;
+ pGrabBag[length+3].Name = "LinkChainName";
+ pGrabBag[length+3].Value <<= sLinkChainName;
+ }
+ propertySet->setPropertyValue( "InteropGrabBag", uno::Any(aGrabBag) );
+ }
+ }
+ Reference< XControlShape > xControlShape( xShape, uno::UNO_QUERY );
+ if ( xControlShape.is() && !getTypeModel().mbVisible )
+ {
+ PropertySet aControlShapeProp( xControlShape->getControl() );
+ aControlShapeProp.setProperty( PROP_EnableVisible, uno::Any( false ) );
+ }
+
+ xShape = finalImplConvertAndInsert(xShape);
+ /* Notify the drawing that a new shape has been inserted. For
+ convenience, pass the rectangle that contains position and
+ size of the shape. */
+ bool bGroupChild = pParentAnchor != nullptr;
+ mrDrawing.notifyXShapeInserted( xShape, aShapeRect, *this, bGroupChild );
+ }
+ }
+ else
+ SAL_WARN("oox", "not converting shape, as calculated rectangle is empty");
+ }
+ return xShape;
+}
+
+void ShapeBase::convertFormatting( const Reference< XShape >& rxShape ) const
+{
+ if( !rxShape.is() )
+ return;
+
+ /* Calculate shape rectangle. Applications may do something special
+ according to some imported shape client data (e.g. Excel cell anchor). */
+ awt::Rectangle aShapeRect = calcShapeRectangle( nullptr );
+
+ // convert the shape, if the calculated rectangle is not empty
+ if( (aShapeRect.Width > 0) || (aShapeRect.Height > 0) )
+ {
+ rxShape->setPosition( awt::Point( aShapeRect.X, aShapeRect.Y ) );
+ rxShape->setSize( awt::Size( aShapeRect.Width, aShapeRect.Height ) );
+ convertShapeProperties( rxShape );
+ }
+}
+
+void ShapeBase::setContainer(ShapeContainer* pContainer) { mpContainer = pContainer; }
+
+ShapeContainer* ShapeBase::getContainer() const { return mpContainer; }
+
+// protected ------------------------------------------------------------------
+
+awt::Rectangle ShapeBase::calcShapeRectangle( const ShapeParentAnchor* pParentAnchor ) const
+{
+ /* Calculate shape rectangle. Applications may do something special
+ according to some imported shape client data (e.g. Excel cell anchor). */
+ awt::Rectangle aShapeRect;
+ const ClientData* pClientData = getClientData();
+ if( !pClientData || !mrDrawing.convertClientAnchor( aShapeRect, pClientData->maAnchor ) )
+ aShapeRect = getRectangle( pParentAnchor );
+ return aShapeRect;
+}
+
+void ShapeBase::convertShapeProperties( const Reference< XShape >& rxShape ) const
+{
+ ::oox::drawingml::ShapePropertyMap aPropMap( mrDrawing.getFilter().getModelObjectHelper() );
+ const GraphicHelper& rGraphicHelper = mrDrawing.getFilter().getGraphicHelper();
+ maTypeModel.maStrokeModel.pushToPropMap( aPropMap, rGraphicHelper );
+ maTypeModel.maFillModel.pushToPropMap( aPropMap, rGraphicHelper );
+
+ uno::Reference<lang::XServiceInfo> xSInfo(rxShape, uno::UNO_QUERY_THROW);
+ if (xSInfo->supportsService("com.sun.star.text.TextFrame"))
+ {
+ // Any other service supporting the ShadowFormat property?
+ maTypeModel.maShadowModel.pushToPropMap(aPropMap, rGraphicHelper);
+ // TextFrames have BackColor, not FillColor
+ if (aPropMap.hasProperty(PROP_FillColor))
+ {
+ aPropMap.setAnyProperty(PROP_BackColor, aPropMap.getProperty(PROP_FillColor));
+ aPropMap.erase(PROP_FillColor);
+ }
+ // TextFrames have BackColorTransparency, not FillTransparence
+ if (aPropMap.hasProperty(PROP_FillTransparence))
+ {
+ aPropMap.setAnyProperty(PROP_BackColorTransparency, aPropMap.getProperty(PROP_FillTransparence));
+ aPropMap.erase(PROP_FillTransparence);
+ }
+ // And no LineColor property; individual borders can have colors and widths
+ std::optional<sal_Int32> oLineWidth;
+ if (maTypeModel.maStrokeModel.moWeight.has())
+ oLineWidth = ConversionHelper::decodeMeasureToHmm(
+ rGraphicHelper, maTypeModel.maStrokeModel.moWeight.get(), 0, false, false);
+ if (aPropMap.hasProperty(PROP_LineColor))
+ {
+ uno::Reference<beans::XPropertySet> xPropertySet(rxShape, uno::UNO_QUERY);
+ static const sal_Int32 aBorders[] = {
+ PROP_TopBorder, PROP_LeftBorder, PROP_BottomBorder, PROP_RightBorder
+ };
+ for (sal_Int32 nBorder : aBorders)
+ {
+ table::BorderLine2 aBorderLine = xPropertySet->getPropertyValue(PropertyMap::getPropertyName(nBorder)).get<table::BorderLine2>();
+ aBorderLine.Color = aPropMap.getProperty(PROP_LineColor).get<sal_Int32>();
+ if (oLineWidth)
+ aBorderLine.LineWidth = *oLineWidth;
+ aPropMap.setProperty(nBorder, aBorderLine);
+ }
+ aPropMap.erase(PROP_LineColor);
+ }
+ }
+ else if (xSInfo->supportsService("com.sun.star.drawing.CustomShape"))
+ maTypeModel.maTextpathModel.pushToPropMap(aPropMap, rxShape, rGraphicHelper);
+
+ PropertySet( rxShape ).setProperties( aPropMap );
+}
+
+SimpleShape::SimpleShape( Drawing& rDrawing, const OUString& rService ) :
+ ShapeBase( rDrawing ),
+ maService( rService )
+{
+}
+
+static void lcl_setSurround(PropertySet& rPropSet, const ShapeTypeModel& rTypeModel, const GraphicHelper& rGraphicHelper)
+{
+ OUString aWrapType = rTypeModel.moWrapType.get();
+
+ // Extreme negative top margin? Then the shape will end up at the top of the page, it's pointless to perform any kind of wrapping.
+ sal_Int32 nMarginTop = ConversionHelper::decodeMeasureToHmm(rGraphicHelper, rTypeModel.maMarginTop, 0, false, true);
+ if (nMarginTop < -35277) // Less than 1000 points.
+ aWrapType.clear();
+
+ css::text::WrapTextMode nSurround = css::text::WrapTextMode_THROUGH;
+ if ( aWrapType == "square" || aWrapType == "tight" ||
+ aWrapType == "through" )
+ {
+ nSurround = css::text::WrapTextMode_PARALLEL;
+ if ( rTypeModel.moWrapSide.get() == "left" )
+ nSurround = css::text::WrapTextMode_LEFT;
+ else if ( rTypeModel.moWrapSide.get() == "right" )
+ nSurround = css::text::WrapTextMode_RIGHT;
+ }
+ else if ( aWrapType == "topAndBottom" )
+ nSurround = css::text::WrapTextMode_NONE;
+
+ rPropSet.setProperty(PROP_Surround, static_cast<sal_Int32>(nSurround));
+ rPropSet.setProperty(PROP_SurroundContour, aWrapType == "tight");
+}
+
+static void lcl_SetAnchorType(PropertySet& rPropSet, const ShapeTypeModel& rTypeModel, const GraphicHelper& rGraphicHelper)
+{
+ if ( rTypeModel.maPosition == "absolute" )
+ {
+ // Word supports as-character (inline) and at-character only, absolute can't be inline.
+ rPropSet.setProperty(PROP_AnchorType, text::TextContentAnchorType_AT_CHARACTER);
+ // anchor is set after insertion, so reset to NONE
+ rPropSet.setAnyProperty(PROP_VertOrient, Any(text::VertOrientation::NONE));
+
+ if ( rTypeModel.maPositionVerticalRelative == "page" )
+ {
+ rPropSet.setProperty(PROP_VertOrientRelation, text::RelOrientation::PAGE_FRAME);
+ }
+ else if ( rTypeModel.maPositionVerticalRelative == "margin" )
+ {
+ rPropSet.setProperty(PROP_VertOrientRelation, text::RelOrientation::PAGE_PRINT_AREA);
+ }
+ else if (rTypeModel.maPositionVerticalRelative == "top-margin-area")
+ {
+ rPropSet.setProperty(PROP_VertOrientRelation, text::RelOrientation::PAGE_PRINT_AREA_TOP);
+ }
+ else if (rTypeModel.maPositionVerticalRelative == "bottom-margin-area")
+ {
+ rPropSet.setProperty(PROP_VertOrientRelation, text::RelOrientation::PAGE_PRINT_AREA_BOTTOM);
+ }
+ else
+ {
+ rPropSet.setProperty(PROP_VertOrientRelation, text::RelOrientation::FRAME);
+ }
+ }
+ else if( rTypeModel.maPosition == "relative" )
+ { // I'm not very sure this is correct either.
+ rPropSet.setProperty(PROP_AnchorType, text::TextContentAnchorType_AT_PARAGRAPH);
+ // anchor is set after insertion, so reset to NONE
+ rPropSet.setAnyProperty(PROP_VertOrient, Any(text::VertOrientation::NONE));
+ }
+ else // static (is the default) means anchored inline
+ {
+ rPropSet.setProperty(PROP_AnchorType, text::TextContentAnchorType_AS_CHARACTER);
+ // Use top orientation, this one seems similar to what MSO uses as inline
+ rPropSet.setAnyProperty(PROP_VertOrient, Any(text::VertOrientation::TOP));
+ }
+
+ if ( rTypeModel.maPositionHorizontal == "center" )
+ rPropSet.setAnyProperty(PROP_HoriOrient, Any(text::HoriOrientation::CENTER));
+ else if ( rTypeModel.maPositionHorizontal == "left" )
+ rPropSet.setAnyProperty(PROP_HoriOrient, Any(text::HoriOrientation::LEFT));
+ else if ( rTypeModel.maPositionHorizontal == "right" )
+ rPropSet.setAnyProperty(PROP_HoriOrient, Any(text::HoriOrientation::RIGHT));
+ else if ( rTypeModel.maPositionHorizontal == "inside" )
+ {
+ rPropSet.setAnyProperty(PROP_HoriOrient, Any(text::HoriOrientation::LEFT));
+ rPropSet.setAnyProperty(PROP_PageToggle, Any(true));
+ }
+ else if ( rTypeModel.maPositionHorizontal == "outside" )
+ {
+ rPropSet.setAnyProperty(PROP_HoriOrient, Any(text::HoriOrientation::RIGHT));
+ rPropSet.setAnyProperty(PROP_PageToggle, Any(true));
+ }
+
+ if ( rTypeModel.maPositionHorizontalRelative == "page" )
+ rPropSet.setAnyProperty(PROP_HoriOrientRelation, Any(text::RelOrientation::PAGE_FRAME));
+ else if ( rTypeModel.maPositionHorizontalRelative == "margin" )
+ rPropSet.setProperty(PROP_HoriOrientRelation, text::RelOrientation::PAGE_PRINT_AREA);
+ else if (rTypeModel.maPositionHorizontalRelative == "right-margin-area" ||
+ rTypeModel.maPositionHorizontalRelative == "inner-margin-area")
+ rPropSet.setProperty(PROP_HoriOrientRelation, text::RelOrientation::PAGE_RIGHT);
+ else if (rTypeModel.maPositionHorizontalRelative == "left-margin-area" ||
+ rTypeModel.maPositionHorizontalRelative == "outer-margin-area")
+ rPropSet.setProperty(PROP_HoriOrientRelation, text::RelOrientation::PAGE_LEFT);
+ else if ( rTypeModel.maPositionHorizontalRelative == "text" )
+ rPropSet.setProperty(PROP_HoriOrientRelation, text::RelOrientation::FRAME);
+
+ if ( rTypeModel.maPositionVertical == "center" )
+ rPropSet.setAnyProperty(PROP_VertOrient, Any(text::VertOrientation::CENTER));
+ else if ( rTypeModel.maPositionVertical == "top" )
+ rPropSet.setAnyProperty(PROP_VertOrient, Any(text::VertOrientation::TOP));
+ else if ( rTypeModel.maPositionVertical == "bottom" )
+ rPropSet.setAnyProperty(PROP_VertOrient, Any(text::VertOrientation::BOTTOM));
+ else if ( rTypeModel.maPositionVertical == "inside" )
+ rPropSet.setAnyProperty(PROP_VertOrient, Any(text::VertOrientation::TOP));
+ else if ( rTypeModel.maPositionVertical == "outside" )
+ rPropSet.setAnyProperty(PROP_VertOrient, Any(text::VertOrientation::BOTTOM));
+
+ lcl_setSurround( rPropSet, rTypeModel, rGraphicHelper );
+}
+
+Reference< XShape > SimpleShape::implConvertAndInsert( const Reference< XShapes >& rxShapes, const awt::Rectangle& rShapeRect ) const
+{
+ awt::Rectangle aShapeRect(rShapeRect);
+ std::optional<Degree100> oRotation;
+ bool bFlipX = false, bFlipY = false;
+ // tdf#137765: skip this rotation for line shapes
+ if (!maTypeModel.maRotation.isEmpty() && maService != "com.sun.star.drawing.LineShape")
+ oRotation = ConversionHelper::decodeRotation(maTypeModel.maRotation);
+ if (!maTypeModel.maFlip.isEmpty())
+ {
+ if (maTypeModel.maFlip.startsWith("x"))
+ {
+ bFlipX = true;
+ }
+ if (maTypeModel.maFlip.endsWith("y"))
+ {
+ bFlipY = true;
+ }
+ }
+
+ Reference< XShape > xShape = mrDrawing.createAndInsertXShape( maService, rxShapes, aShapeRect );
+ SdrObject* pShape = SdrObject::getSdrObjectFromXShape(xShape);
+ if( pShape && getShapeType() >= 0 )
+ {
+ OUString aShapeType = EnhancedCustomShapeTypeNames::Get( static_cast< MSO_SPT >(getShapeType()) );
+ //The resize autoshape to fit text attr of FontWork/Word-Art should always be false
+ //for the fallback geometry.
+ if(aShapeType.startsWith("fontwork"))
+ {
+ pShape->SetMergedItem(makeSdrTextAutoGrowHeightItem(false));
+ pShape->SetMergedItem(makeSdrTextAutoGrowWidthItem(false));
+ }
+ }
+ convertShapeProperties( xShape );
+
+ // Handle left/right/top/bottom wrap distance.
+ // Default value of mso-wrap-distance-left/right is supposed to be 0 (see
+ // 19.1.2.19 of the VML spec), but Word implements a non-zero value.
+ // [MS-ODRAW] says the below default value in 2.3.4.9.
+ const GraphicHelper& rGraphicHelper = mrDrawing.getFilter().getGraphicHelper();
+ OUString aWrapDistanceLeft = OUString::number(0x0001BE7C);
+ if (!maTypeModel.maWrapDistanceLeft.isEmpty())
+ aWrapDistanceLeft = maTypeModel.maWrapDistanceLeft;
+ sal_Int32 nWrapDistanceLeft = ConversionHelper::decodeMeasureToHmm(rGraphicHelper, aWrapDistanceLeft, 0, true, false);
+ PropertySet(xShape).setAnyProperty(PROP_LeftMargin, uno::Any(nWrapDistanceLeft));
+ OUString aWrapDistanceRight = OUString::number(0x0001BE7C);
+ if (!maTypeModel.maWrapDistanceRight.isEmpty())
+ aWrapDistanceRight = maTypeModel.maWrapDistanceRight;
+ sal_Int32 nWrapDistanceRight = ConversionHelper::decodeMeasureToHmm(rGraphicHelper, aWrapDistanceRight, 0, true, false);
+ PropertySet(xShape).setAnyProperty(PROP_RightMargin, uno::Any(nWrapDistanceRight));
+ sal_Int32 nWrapDistanceTop = 0;
+ if (!maTypeModel.maWrapDistanceTop.isEmpty())
+ nWrapDistanceTop = ConversionHelper::decodeMeasureToHmm(rGraphicHelper, maTypeModel.maWrapDistanceTop, 0, false, true);
+ PropertySet(xShape).setAnyProperty(PROP_TopMargin, uno::Any(nWrapDistanceTop));
+ sal_Int32 nWrapDistanceBottom = 0;
+ if (!maTypeModel.maWrapDistanceBottom.isEmpty())
+ nWrapDistanceBottom = ConversionHelper::decodeMeasureToHmm(rGraphicHelper, maTypeModel.maWrapDistanceBottom, 0, false, true);
+ PropertySet(xShape).setAnyProperty(PROP_BottomMargin, uno::Any(nWrapDistanceBottom));
+
+ if ( maService == "com.sun.star.text.TextFrame" )
+ {
+ PropertySet( xShape ).setAnyProperty( PROP_FrameIsAutomaticHeight, Any( maTypeModel.mbAutoHeight ) );
+ PropertySet( xShape ).setAnyProperty( PROP_SizeType, Any( maTypeModel.mbAutoHeight ? SizeType::MIN : SizeType::FIX ) );
+ if( getTextBox()->borderDistanceSet )
+ {
+ PropertySet( xShape ).setAnyProperty( PROP_LeftBorderDistance, Any( sal_Int32( getTextBox()->borderDistanceLeft )));
+ PropertySet( xShape ).setAnyProperty( PROP_TopBorderDistance, Any( sal_Int32( getTextBox()->borderDistanceTop )));
+ PropertySet( xShape ).setAnyProperty( PROP_RightBorderDistance, Any( sal_Int32( getTextBox()->borderDistanceRight )));
+ PropertySet( xShape ).setAnyProperty( PROP_BottomBorderDistance, Any( sal_Int32( getTextBox()->borderDistanceBottom )));
+ }
+
+ sal_Int16 nWritingMode = text::WritingMode2::LR_TB;
+ if (getTextBox()->maLayoutFlow == "vertical" && maTypeModel.maLayoutFlowAlt.isEmpty())
+ {
+ nWritingMode = text::WritingMode2::TB_RL;
+ }
+ else if (maTypeModel.maLayoutFlowAlt == "bottom-to-top")
+ {
+ nWritingMode = text::WritingMode2::BT_LR;
+ }
+ if (nWritingMode != text::WritingMode2::LR_TB)
+ {
+ PropertySet(xShape).setAnyProperty(PROP_WritingMode, uno::Any(nWritingMode));
+ }
+ // tdf#123626
+ if (!maShapeModel.maHyperlink.isEmpty())
+ PropertySet(xShape).setAnyProperty(PROP_HyperLinkURL, Any(maShapeModel.maHyperlink));
+ }
+ else
+ {
+ // FIXME Setting the relative width/height only for everything but text frames as
+ // TextFrames already have relative width/height feature... but currently not working
+ // in the way we need.
+
+ // Set the relative width / height if any
+ if ( !maTypeModel.maWidthPercent.isEmpty( ) )
+ {
+ // Only page-relative width is supported ATM
+ if ( maTypeModel.maWidthRelative.isEmpty() || maTypeModel.maWidthRelative == "page" )
+ {
+ sal_Int16 nWidth = maTypeModel.maWidthPercent.toInt32() / 10;
+ // Only apply if nWidth != 0
+ if ( nWidth )
+ PropertySet( xShape ).setAnyProperty(PROP_RelativeWidth, Any( nWidth ) );
+ }
+ }
+ if ( !maTypeModel.maHeightPercent.isEmpty( ) )
+ {
+ // Only page-relative height is supported ATM
+ if ( maTypeModel.maHeightRelative.isEmpty() || maTypeModel.maHeightRelative == "page" )
+ {
+ sal_Int16 nHeight = maTypeModel.maHeightPercent.toInt32() / 10;
+ // Only apply if nHeight != 0
+ if ( nHeight )
+ PropertySet( xShape ).setAnyProperty(PROP_RelativeHeight, Any( nHeight ) );
+ }
+ }
+
+ // drawinglayer default is center, MSO default is top.
+ drawing::TextVerticalAdjust eTextVerticalAdjust = drawing::TextVerticalAdjust_TOP;
+ if (maTypeModel.maVTextAnchor == "middle")
+ eTextVerticalAdjust = drawing::TextVerticalAdjust_CENTER;
+ else if (maTypeModel.maVTextAnchor == "bottom")
+ eTextVerticalAdjust = drawing::TextVerticalAdjust_BOTTOM;
+ PropertySet(xShape).setAnyProperty(PROP_TextVerticalAdjust, Any(eTextVerticalAdjust));
+
+ // tdf#97618
+ if(!maTypeModel.maWrapStyle.isEmpty())
+ PropertySet(xShape).setAnyProperty(PROP_TextWordWrap, Any(maTypeModel.maWrapStyle == "square"));
+
+ // tdf#123626
+ if (!maShapeModel.maHyperlink.isEmpty())
+ PropertySet(xShape).setAnyProperty(PROP_Hyperlink, Any(maShapeModel.maHyperlink));
+
+ PropertySet(xShape).setAnyProperty(PROP_TextAutoGrowHeight,
+ Any(maTypeModel.mbAutoHeight));
+
+ if (getTextBox())
+ {
+ getTextBox()->convert(xShape);
+ if (getTextBox()->borderDistanceSet)
+ {
+ awt::Size aSize = xShape->getSize();
+ PropertySet(xShape).setAnyProperty(PROP_TextLeftDistance, Any(sal_Int32(getTextBox()->borderDistanceLeft)));
+ PropertySet(xShape).setAnyProperty(PROP_TextUpperDistance, Any(sal_Int32(getTextBox()->borderDistanceTop)));
+ PropertySet(xShape).setAnyProperty(PROP_TextRightDistance, Any(sal_Int32(getTextBox()->borderDistanceRight)));
+ PropertySet(xShape).setAnyProperty(PROP_TextLowerDistance, Any(sal_Int32(getTextBox()->borderDistanceBottom)));
+ xShape->setSize(aSize);
+ }
+ }
+ }
+
+ // Import Legacy Fragments (if any)
+ if( xShape.is() && !maShapeModel.maLegacyDiagramPath.isEmpty() )
+ {
+ Reference< XInputStream > xInStrm( mrDrawing.getFilter().openInputStream( maShapeModel.maLegacyDiagramPath ), UNO_SET_THROW );
+ if( xInStrm.is() )
+ PropertySet( xShape ).setProperty( PROP_LegacyFragment, xInStrm );
+ }
+
+ PropertySet aPropertySet(xShape);
+ if (xShape.is())
+ {
+ if (oRotation)
+ {
+ aPropertySet.setAnyProperty(PROP_RotateAngle, Any((*oRotation).get()));
+ uno::Reference<lang::XServiceInfo> xServiceInfo(rxShapes, uno::UNO_QUERY);
+ if (!xServiceInfo->supportsService("com.sun.star.drawing.GroupShape"))
+ {
+ // If rotation is used, simple setPosition() is not enough.
+ aPropertySet.setAnyProperty(PROP_HoriOrientPosition, Any(aShapeRect.X));
+ aPropertySet.setAnyProperty(PROP_VertOrientPosition, Any(aShapeRect.Y));
+ }
+ }
+
+ // custom shape geometry attributes
+ std::vector<css::beans::PropertyValue> aPropVec;
+
+ // When flip has 'x' or 'y', the associated ShapeRect will be changed but direction change doesn't occur.
+ // It might occur internally in SdrObject of "sw" module, not here.
+ // The associated properties "PROP_MirroredX" and "PROP_MirroredY" have to be set here so that direction change will occur internally.
+ if (bFlipX)
+ aPropVec.push_back(comphelper::makePropertyValue("MirroredX", true));
+ if (bFlipY)
+ aPropVec.push_back(comphelper::makePropertyValue("MirroredY", true));
+
+ if (!maTypeModel.maAdjustments.isEmpty())
+ {
+ std::vector<drawing::EnhancedCustomShapeAdjustmentValue> aAdjustmentValues;
+ sal_Int32 nIndex = 0;
+ do
+ {
+ std::u16string_view aToken = o3tl::getToken(maTypeModel.maAdjustments, 0, ',', nIndex);
+ drawing::EnhancedCustomShapeAdjustmentValue aAdjustmentValue;
+ if (aToken.empty())
+ aAdjustmentValue.State = css::beans::PropertyState::PropertyState_DEFAULT_VALUE;
+ else
+ aAdjustmentValue.Value <<= o3tl::toInt32(aToken);
+ aAdjustmentValues.push_back(aAdjustmentValue);
+ } while (nIndex >= 0);
+
+ css::beans::PropertyValue aProp;
+ aProp.Name = "AdjustmentValues";
+ aProp.Value <<= comphelper::containerToSequence(aAdjustmentValues);
+ aPropVec.push_back(aProp);
+ }
+
+ if (!aPropVec.empty())
+ aPropertySet.setAnyProperty(PROP_CustomShapeGeometry, Any(comphelper::containerToSequence(aPropVec)));
+ }
+
+ lcl_SetAnchorType(aPropertySet, maTypeModel, rGraphicHelper );
+
+ return xShape;
+}
+
+Reference<XShape> SimpleShape::finalImplConvertAndInsert(const css::uno::Reference<css::drawing::XShape>& rxShape) const
+{
+ // tdf#41466 This setting must be done here, because the position of textbox will be set as an
+ // effect of the PROP_TextBox property setting, and if we do this setting earlier (setting of
+ // properties of position and size) then the position of textbox will be set with wrong data.
+ // TODO: TextShape is set if we have rect shape in group; we should use the shape-with-textbox
+ // mechanism to handle this situation
+ if (getTextBox() && maService != "com.sun.star.text.TextFrame" && maService != "com.sun.star.drawing.TextShape"
+ && !maShapeModel.mbInGroup)
+ {
+ const GraphicHelper& rGraphicHelper = mrDrawing.getFilter().getGraphicHelper();
+ const auto& nLeft = ConversionHelper::decodeMeasureToHmm(
+ rGraphicHelper, maTypeModel.maMarginLeft, 0, true, true);
+ PropertySet aPropertySet(rxShape);
+ aPropertySet.setProperty(PROP_HoriOrientPosition, nLeft);
+ const auto& nTop = ConversionHelper::decodeMeasureToHmm(
+ rGraphicHelper, maTypeModel.maMarginTop, 0, true, true);
+ aPropertySet.setProperty(PROP_VertOrientPosition, nTop);
+ aPropertySet.setProperty(PROP_TextBox, true);
+
+ // And these properties must be set after textbox creation (set PROP_Textbox property).
+ // Note: if you set a new property then you have to handle it in the proper
+ // SwTextBoxHelper::syncProperty function.
+ if (maTypeModel.maLayoutFlowAlt == "bottom-to-top")
+ aPropertySet.setAnyProperty(PROP_TextWritingMode, uno::Any(text::WritingMode2::BT_LR));
+ }
+ return ShapeBase::finalImplConvertAndInsert(rxShape);
+}
+Reference< XShape > SimpleShape::createEmbeddedPictureObject( const Reference< XShapes >& rxShapes, const awt::Rectangle& rShapeRect, OUString const & rGraphicPath ) const
+{
+ Reference<XGraphic> xGraphic = mrDrawing.getFilter().getGraphicHelper().importEmbeddedGraphic(rGraphicPath);
+ return SimpleShape::createPictureObject(rxShapes, rShapeRect, xGraphic);
+}
+
+Reference< XShape > SimpleShape::createPictureObject(const Reference< XShapes >& rxShapes,
+ const awt::Rectangle& rShapeRect,
+ uno::Reference<graphic::XGraphic> const & rxGraphic) const
+{
+ Reference< XShape > xShape = mrDrawing.createAndInsertXShape( "com.sun.star.drawing.GraphicObjectShape", rxShapes, rShapeRect );
+ if( xShape.is() )
+ {
+ PropertySet aPropSet(xShape);
+ if (rxGraphic.is())
+ {
+ aPropSet.setProperty(PROP_Graphic, rxGraphic);
+ }
+ uno::Reference< lang::XServiceInfo > xServiceInfo(rxShapes, uno::UNO_QUERY);
+ // If the shape has an absolute position, set the properties accordingly, unless we're inside a group shape.
+ if ( maTypeModel.maPosition == "absolute" && !xServiceInfo->supportsService("com.sun.star.drawing.GroupShape"))
+ {
+ aPropSet.setProperty(PROP_HoriOrientPosition, rShapeRect.X);
+ aPropSet.setProperty(PROP_VertOrientPosition, rShapeRect.Y);
+ aPropSet.setProperty(PROP_Opaque, false);
+ }
+ // fdo#70457: preserve rotation information
+ if ( !maTypeModel.maRotation.isEmpty() )
+ aPropSet.setAnyProperty(PROP_RotateAngle, Any(ConversionHelper::decodeRotation(maTypeModel.maRotation).get()));
+
+ const GraphicHelper& rGraphicHelper = mrDrawing.getFilter().getGraphicHelper();
+ lcl_SetAnchorType(aPropSet, maTypeModel, rGraphicHelper);
+
+ const sal_Int32 nWrapDistanceLeft = ConversionHelper::decodeMeasureToHmm(rGraphicHelper, maTypeModel.maWrapDistanceLeft, 0, true, true);
+ const sal_Int32 nWrapDistanceRight = ConversionHelper::decodeMeasureToHmm(rGraphicHelper, maTypeModel.maWrapDistanceRight, 0, true, true);
+ const sal_Int32 nWrapDistanceTop = ConversionHelper::decodeMeasureToHmm(rGraphicHelper, maTypeModel.maWrapDistanceTop, 0, false, true);
+ const sal_Int32 nWrapDistanceBottom = ConversionHelper::decodeMeasureToHmm(rGraphicHelper, maTypeModel.maWrapDistanceBottom, 0, false, true);
+ aPropSet.setProperty(PROP_LeftMargin, uno::Any(nWrapDistanceLeft));
+ aPropSet.setProperty(PROP_RightMargin, uno::Any(nWrapDistanceRight));
+ aPropSet.setProperty(PROP_TopMargin, uno::Any(nWrapDistanceTop));
+ aPropSet.setProperty(PROP_BottomMargin, uno::Any(nWrapDistanceBottom));
+
+ if (maTypeModel.moCropBottom.has() || maTypeModel.moCropLeft.has() || maTypeModel.moCropRight.has() || maTypeModel.moCropTop.has())
+ {
+ text::GraphicCrop aGraphicCrop;
+ awt::Size aOriginalSize = rGraphicHelper.getOriginalSize(rxGraphic);
+
+ if (maTypeModel.moCropBottom.has())
+ aGraphicCrop.Bottom = lclConvertCrop(maTypeModel.moCropBottom.get(), aOriginalSize.Height);
+ if (maTypeModel.moCropLeft.has())
+ aGraphicCrop.Left = lclConvertCrop(maTypeModel.moCropLeft.get(), aOriginalSize.Width);
+ if (maTypeModel.moCropRight.has())
+ aGraphicCrop.Right = lclConvertCrop(maTypeModel.moCropRight.get(), aOriginalSize.Width);
+ if (maTypeModel.moCropTop.has())
+ aGraphicCrop.Top = lclConvertCrop(maTypeModel.moCropTop.get(), aOriginalSize.Height);
+
+ aPropSet.setProperty(PROP_GraphicCrop, aGraphicCrop);
+ }
+
+ if (maTypeModel.mnGain == -70 && maTypeModel.mnBlacklevel == 70)
+ {
+ // Map MSO 'washout' to our watermark colormode.
+ aPropSet.setProperty(PROP_GraphicColorMode, uno::Any(drawing::ColorMode_WATERMARK));
+ }
+ }
+ return xShape;
+}
+
+RectangleShape::RectangleShape( Drawing& rDrawing ) :
+ SimpleShape( rDrawing, "com.sun.star.drawing.RectangleShape" )
+{
+}
+
+Reference<XShape> RectangleShape::implConvertAndInsert(const Reference<XShapes>& rxShapes, const awt::Rectangle& rShapeRect) const
+{
+ OUString aGraphicPath = getGraphicPath();
+
+ // try to create a picture object
+ if(!aGraphicPath.isEmpty())
+ return SimpleShape::createEmbeddedPictureObject(rxShapes, rShapeRect, aGraphicPath);
+
+ // default: try to create a rectangle shape
+ Reference<XShape> xShape = SimpleShape::implConvertAndInsert(rxShapes, rShapeRect);
+ OUString sArcsize = maTypeModel.maArcsize;
+ if ( !sArcsize.isEmpty( ) )
+ {
+ sal_Unicode cLastChar = sArcsize[sArcsize.getLength() - 1];
+ sal_Int32 nValue = o3tl::toInt32(sArcsize.subView( 0, sArcsize.getLength() - 1 ));
+ // Get the smallest half-side
+ double size = std::min( rShapeRect.Height, rShapeRect.Width ) / 2.0;
+ sal_Int32 nRadius = 0;
+ if ( cLastChar == 'f' )
+ nRadius = size * nValue / 65536;
+ else if ( cLastChar == '%' )
+ nRadius = size * nValue / 100;
+ PropertySet( xShape ).setAnyProperty( PROP_CornerRadius, Any( nRadius ) );
+ }
+ return xShape;
+}
+
+EllipseShape::EllipseShape( Drawing& rDrawing ) :
+ SimpleShape( rDrawing, "com.sun.star.drawing.EllipseShape" )
+{
+}
+
+PolyLineShape::PolyLineShape( Drawing& rDrawing ) :
+ SimpleShape( rDrawing, "com.sun.star.drawing.PolyLineShape" )
+{
+}
+
+Reference< XShape > PolyLineShape::implConvertAndInsert( const Reference< XShapes >& rxShapes, const awt::Rectangle& rShapeRect ) const
+{
+ ::std::vector<awt::Point> aAbsPoints;
+ awt::Rectangle aCoordSys = getCoordSystem();
+ if (!maShapeModel.maPoints.empty() && (aCoordSys.Width > 0) && (aCoordSys.Height > 0))
+ {
+ for (auto const& point : maShapeModel.maPoints)
+ aAbsPoints.push_back(lclGetAbsPoint(point, rShapeRect, aCoordSys));
+ // A polyline cannot be filled but only a polygon. We treat first point == last point as
+ // indicator for being closed. In that case we force to type PolyPolygonShape.
+ if (aAbsPoints.size() > 2 && aAbsPoints.front().X == aAbsPoints.back().X
+ && aAbsPoints.front().Y == aAbsPoints.back().Y)
+ {
+ const_cast<PolyLineShape*>(this)->setService("com.sun.star.drawing.PolyPolygonShape");
+ }
+ }
+
+ Reference<XShape> xShape = SimpleShape::implConvertAndInsert(rxShapes, rShapeRect);
+
+ // polygon path
+
+ if (!aAbsPoints.empty())
+ {
+ PointSequenceSequence aPointSeq{ comphelper::containerToSequence( aAbsPoints ) };
+ PropertySet aPropSet( xShape );
+ aPropSet.setProperty( PROP_PolyPolygon, aPointSeq );
+ }
+ return xShape;
+}
+
+namespace
+{
+ void doMirrorX(SdrObject* pShape)
+ {
+ Point aCenter(pShape->GetSnapRect().Center());
+ Point aPoint2(aCenter);
+ aPoint2.setY(aPoint2.getY() + 1);
+ pShape->NbcMirror(aCenter, aPoint2);
+ }
+
+ void doMirrorY(SdrObject* pShape)
+ {
+ Point aCenter(pShape->GetSnapRect().Center());
+ Point aPoint2(aCenter);
+ aPoint2.setX(aPoint2.getX() + 1);
+ pShape->NbcMirror(aCenter, aPoint2);
+ }
+
+ void handleMirroring(const ShapeTypeModel& rTypeModel, const Reference<XShape>& rxShape)
+ {
+ if (!rTypeModel.maFlip.isEmpty())
+ {
+ if (SdrObject* pShape = SdrObject::getSdrObjectFromXShape(rxShape))
+ {
+ if (rTypeModel.maFlip.startsWith("x"))
+ doMirrorX(pShape);
+ if (rTypeModel.maFlip.endsWith("y"))
+ doMirrorY(pShape);
+ }
+ }
+ }
+
+ void handleRotation(const ShapeTypeModel& rTypeModel, const Reference<XShape>& rxShape)
+ {
+ if (!rTypeModel.maRotation.isEmpty())
+ {
+ if (SdrObject* pShape = SdrObject::getSdrObjectFromXShape(rxShape))
+ {
+ // The needed factor -1 for opposite direction and factor 100 for Degree100 is
+ // contained in method decodeRotation().
+ Degree100 nAngle(ConversionHelper::decodeRotation(rTypeModel.maRotation));
+ pShape->NbcRotate(pShape->GetSnapRect().Center(), nAngle);
+ }
+ }
+ }
+}
+
+LineShape::LineShape(Drawing& rDrawing)
+ : SimpleShape(rDrawing, "com.sun.star.drawing.LineShape")
+{
+}
+
+Reference<XShape> LineShape::implConvertAndInsert(const Reference<XShapes>& rxShapes, const awt::Rectangle& rShapeRect) const
+{
+ Reference<XShape> xShape = SimpleShape::implConvertAndInsert(rxShapes, rShapeRect);
+ // tdf#137765
+ handleRotation(maTypeModel, xShape);
+ // tdf#97517 tdf#137678
+ // The MirroredX and MirroredY properties (in the CustomShapeGeometry property) are not
+ // supported for the LineShape by UNO, so we have to make the mirroring here.
+ handleMirroring(maTypeModel, xShape);
+ return xShape;
+}
+
+awt::Rectangle LineShape::getAbsRectangle() const
+{
+ const GraphicHelper& rGraphicHelper = mrDrawing.getFilter().getGraphicHelper();
+ awt::Rectangle aShapeRect;
+ sal_Int32 nIndex = 0;
+
+ aShapeRect.X = ConversionHelper::decodeMeasureToHmm(rGraphicHelper, o3tl::getToken(maShapeModel.maFrom, 0, ',', nIndex), 0, true, true);
+ aShapeRect.Y = ConversionHelper::decodeMeasureToHmm(rGraphicHelper, o3tl::getToken(maShapeModel.maFrom, 0, ',', nIndex), 0, false, true);
+ nIndex = 0;
+ aShapeRect.Width = ConversionHelper::decodeMeasureToHmm(rGraphicHelper, o3tl::getToken(maShapeModel.maTo, 0, ',', nIndex), 0, true, true) - aShapeRect.X;
+ aShapeRect.Height = ConversionHelper::decodeMeasureToHmm(rGraphicHelper, o3tl::getToken(maShapeModel.maTo, 0, ',', nIndex), 0, false, true) - aShapeRect.Y;
+ return aShapeRect;
+}
+
+awt::Rectangle LineShape::getRelRectangle() const
+{
+ awt::Rectangle aShapeRect;
+ sal_Int32 nIndex = 0;
+
+ aShapeRect.X = o3tl::toInt32(o3tl::getToken(maShapeModel.maFrom, 0, ',', nIndex));
+ aShapeRect.Y = o3tl::toInt32(o3tl::getToken(maShapeModel.maFrom, 0, ',', nIndex));
+ nIndex = 0;
+ aShapeRect.Width = o3tl::toInt32(o3tl::getToken(maShapeModel.maTo, 0, ',', nIndex)) - aShapeRect.X;
+ aShapeRect.Height = o3tl::toInt32(o3tl::getToken(maShapeModel.maTo, 0, ',', nIndex)) - aShapeRect.Y;
+ return aShapeRect;
+}
+
+BezierShape::BezierShape(Drawing& rDrawing)
+ : SimpleShape(rDrawing, "com.sun.star.drawing.OpenBezierShape")
+{
+}
+
+Reference< XShape > BezierShape::implConvertAndInsert( const Reference< XShapes >& rxShapes, const awt::Rectangle& rShapeRect ) const
+{
+ // If we have an 'x' in the last part of the path it means it is closed...
+ sal_Int32 nPos = maShapeModel.maVmlPath.lastIndexOf(',');
+ if ( nPos != -1 && maShapeModel.maVmlPath.indexOf('x', nPos) != -1 )
+ {
+ const_cast<BezierShape*>( this )->setService( "com.sun.star.drawing.ClosedBezierShape" );
+ }
+
+ awt::Rectangle aCoordSys = getCoordSystem();
+ PolyPolygonBezierCoords aBezierCoords;
+
+ if( (aCoordSys.Width > 0) && (aCoordSys.Height > 0) )
+ {
+ const GraphicHelper& rGraphicHelper = mrDrawing.getFilter().getGraphicHelper();
+
+ // Bezier paths may consist of one or more sub-paths
+ typedef ::std::vector< ::std::vector< PolygonFlags > > FlagsList;
+ std::vector< ::std::vector< awt::Point > > aCoordLists;
+ FlagsList aFlagLists;
+
+ // Curve defined by to, from, control1 and control2 attributes
+ if ( maShapeModel.maVmlPath.isEmpty() )
+ {
+ aCoordLists.emplace_back( );
+ aFlagLists.emplace_back( );
+ sal_Int32 nIndex = 0;
+
+ // Start point
+ aCoordLists[ 0 ].emplace_back(
+ ConversionHelper::decodeMeasureToHmm( rGraphicHelper, o3tl::getToken(maShapeModel.maFrom, 0, ',', nIndex ), 0, true, true ),
+ ConversionHelper::decodeMeasureToHmm( rGraphicHelper, o3tl::getToken(maShapeModel.maFrom, 0, ',', nIndex ), 0, false, true ) );
+ // Control point 1
+ aCoordLists[ 0 ].emplace_back(
+ ConversionHelper::decodeMeasureToHmm( rGraphicHelper, o3tl::getToken(maShapeModel.maControl1, 0, ',', nIndex ), 0, true, true ),
+ ConversionHelper::decodeMeasureToHmm( rGraphicHelper, o3tl::getToken(maShapeModel.maControl1, 0, ',', nIndex ), 0, false, true ) );
+ // Control point 2
+ aCoordLists[ 0 ].emplace_back(
+ ConversionHelper::decodeMeasureToHmm( rGraphicHelper, o3tl::getToken(maShapeModel.maControl2, 0, ',', nIndex ), 0, true, true ),
+ ConversionHelper::decodeMeasureToHmm( rGraphicHelper, o3tl::getToken(maShapeModel.maControl2, 0, ',', nIndex ), 0, false, true ) );
+ // End point
+ aCoordLists[ 0 ].emplace_back(
+ ConversionHelper::decodeMeasureToHmm( rGraphicHelper, o3tl::getToken(maShapeModel.maTo, 0, ',', nIndex ), 0, true, true ),
+ ConversionHelper::decodeMeasureToHmm( rGraphicHelper, o3tl::getToken(maShapeModel.maTo, 0, ',', nIndex ), 0, false, true ) );
+
+ // First and last points are normals, points 2 and 4 are controls
+ aFlagLists[ 0 ].resize( aCoordLists[ 0 ].size(), PolygonFlags_CONTROL );
+ aFlagLists[ 0 ][ 0 ] = PolygonFlags_NORMAL;
+ aFlagLists[ 0 ].back() = PolygonFlags_NORMAL;
+ }
+ // Curve defined by path attribute
+ else
+ {
+ // Parse VML path string and convert to absolute coordinates
+ ConversionHelper::decodeVmlPath( aCoordLists, aFlagLists, maShapeModel.maVmlPath );
+
+ for (auto & coordList : aCoordLists)
+ for (auto & point : coordList)
+ {
+ point = lclGetAbsPoint( point, rShapeRect, aCoordSys );
+ }
+ }
+
+ aBezierCoords.Coordinates.realloc( aCoordLists.size() );
+ auto pCoordinates = aBezierCoords.Coordinates.getArray();
+ for ( size_t i = 0; i < aCoordLists.size(); i++ )
+ pCoordinates[i] = comphelper::containerToSequence( aCoordLists[i] );
+
+ aBezierCoords.Flags.realloc( aFlagLists.size() );
+ auto pFlags = aBezierCoords.Flags.getArray();
+ for ( size_t i = 0; i < aFlagLists.size(); i++ )
+ pFlags[i] = comphelper::containerToSequence( aFlagLists[i] );
+
+ if( !aCoordLists.front().empty() && !aCoordLists.back().empty()
+ && aCoordLists.front().front().X == aCoordLists.back().back().X
+ && aCoordLists.front().front().Y == aCoordLists.back().back().Y )
+ { // HACK: If the shape is in fact closed, which can be found out only when the path is known,
+ // force to closed bezier shape (otherwise e.g. fill won't work).
+ const_cast< BezierShape* >( this )->setService( "com.sun.star.drawing.ClosedBezierShape" );
+ }
+ }
+
+ Reference< XShape > xShape = SimpleShape::implConvertAndInsert( rxShapes, rShapeRect );
+
+ if( aBezierCoords.Coordinates.hasElements())
+ {
+ PropertySet aPropSet( xShape );
+ aPropSet.setProperty( PROP_PolyPolygonBezier, aBezierCoords );
+ }
+
+ // tdf#105875 handle rotation
+ // Note: must rotate before flip!
+ handleRotation(maTypeModel, xShape);
+
+ // Handle horizontal and vertical flip.
+ handleMirroring(maTypeModel, xShape);
+
+ return xShape;
+}
+
+CustomShape::CustomShape( Drawing& rDrawing ) :
+ SimpleShape( rDrawing, "com.sun.star.drawing.CustomShape" )
+{
+}
+
+Reference< XShape > CustomShape::implConvertAndInsert( const Reference< XShapes >& rxShapes, const awt::Rectangle& rShapeRect ) const
+{
+ // try to create a custom shape
+ Reference< XShape > xShape = SimpleShape::implConvertAndInsert( rxShapes, rShapeRect );
+ if( xShape.is() ) try
+ {
+ // create the custom shape geometry
+ Reference< XEnhancedCustomShapeDefaulter > xDefaulter( xShape, UNO_QUERY_THROW );
+ xDefaulter->createCustomShapeDefaults( OUString::number( getShapeType() ) );
+ // convert common properties
+ convertShapeProperties( xShape );
+ }
+ catch( Exception& )
+ {
+ }
+ return xShape;
+}
+
+ComplexShape::ComplexShape( Drawing& rDrawing ) :
+ CustomShape( rDrawing )
+{
+}
+
+Reference< XShape > ComplexShape::implConvertAndInsert( const Reference< XShapes >& rxShapes, const awt::Rectangle& rShapeRect ) const
+{
+ XmlFilterBase& rFilter = mrDrawing.getFilter();
+ sal_Int32 nShapeType = getShapeType();
+ OUString aGraphicPath = getGraphicPath();
+
+ // try to find registered OLE object info
+ if( const OleObjectInfo* pOleObjectInfo = mrDrawing.getOleObjectInfo( maTypeModel.maShapeId ) )
+ {
+ SAL_WARN_IF(
+ nShapeType != VML_SHAPETYPE_PICTUREFRAME, "oox",
+ "ComplexShape::implConvertAndInsert - unexpected shape type");
+
+ // if OLE object is embedded into a DrawingML shape (PPTX), do not create it here
+ if( pOleObjectInfo->mbDmlShape )
+ return Reference< XShape >();
+
+ PropertyMap aOleProps;
+ awt::Size aOleSize( rShapeRect.Width, rShapeRect.Height );
+ if( rFilter.getOleObjectHelper().importOleObject( aOleProps, *pOleObjectInfo, aOleSize ) )
+ {
+ Reference< XShape > xShape = mrDrawing.createAndInsertXShape( "com.sun.star.drawing.OLE2Shape", rxShapes, rShapeRect );
+ if( xShape.is() )
+ {
+ // set the replacement graphic
+ if( !aGraphicPath.isEmpty() )
+ {
+ WmfExternal aExtHeader;
+ aExtHeader.mapMode = 8;
+ aExtHeader.xExt = rShapeRect.Width;
+ aExtHeader.yExt = rShapeRect.Height;
+
+ Reference< XGraphic > xGraphic = rFilter.getGraphicHelper().importEmbeddedGraphic(aGraphicPath, &aExtHeader);
+ if (xGraphic.is())
+ aOleProps.setProperty( PROP_Graphic, xGraphic);
+ }
+
+ PropertySet aPropSet( xShape );
+ aPropSet.setProperties( aOleProps );
+
+ return xShape;
+ }
+ }
+ }
+
+ // try to find registered form control info
+ const ControlInfo* pControlInfo = mrDrawing.getControlInfo( maTypeModel.maShapeId );
+ if( pControlInfo && !pControlInfo->maFragmentPath.isEmpty() )
+ {
+ if( !pControlInfo->maName.isEmpty() )
+ {
+ // load the control properties from fragment
+ ::oox::ole::EmbeddedControl aControl(pControlInfo->maName);
+ if( rFilter.importFragment( new ::oox::ole::AxControlFragment( rFilter, pControlInfo->maFragmentPath, aControl ) ) )
+ {
+ // create and return the control shape (including control model)
+ sal_Int32 nCtrlIndex = -1;
+ Reference< XShape > xShape = mrDrawing.createAndInsertXControlShape( aControl, rxShapes, rShapeRect, nCtrlIndex );
+
+ if (pControlInfo->mbTextContentShape)
+ {
+ PropertySet aPropertySet(xShape);
+ lcl_SetAnchorType(aPropertySet, maTypeModel, mrDrawing.getFilter().getGraphicHelper());
+ }
+ // on error, proceed and try to create picture from replacement image
+ if( xShape.is() )
+ return xShape;
+ }
+ }
+ }
+
+ // host application wants to create the shape (do not try failed OLE controls again)
+ if( (nShapeType == VML_SHAPETYPE_HOSTCONTROL) && !pControlInfo )
+ {
+ OSL_ENSURE( getClientData(), "ComplexShape::implConvertAndInsert - missing client data" );
+ Reference< XShape > xShape = mrDrawing.createAndInsertClientXShape( *this, rxShapes, rShapeRect );
+ if( xShape.is() )
+ return xShape;
+ }
+
+
+ if( getShapeModel().mbIsSignatureLine )
+ {
+ uno::Reference<graphic::XGraphic> xGraphic;
+ bool bIsSigned(false);
+ try
+ {
+ // Get the document signatures
+ Reference<security::XDocumentDigitalSignatures> xSignatures(
+ security::DocumentDigitalSignatures::createDefault(
+ comphelper::getProcessComponentContext()));
+
+ uno::Reference<embed::XStorage> xStorage
+ = comphelper::OStorageHelper::GetStorageOfFormatFromURL(
+ ZIP_STORAGE_FORMAT_STRING, mrDrawing.getFilter().getFileUrl(),
+ embed::ElementModes::READ);
+ SAL_WARN_IF(!xStorage.is(), "oox.vml", "No xStorage!");
+
+ const uno::Sequence<security::DocumentSignatureInformation> xSignatureInfo
+ = xSignatures->verifyScriptingContentSignatures(xStorage,
+ uno::Reference<io::XInputStream>());
+
+ // Try to find matching signature line image - if none exists that is fine,
+ // then the signature line is not digitally signed.
+ auto pSignInfo = std::find_if(xSignatureInfo.begin(), xSignatureInfo.end(),
+ [this](const security::DocumentSignatureInformation& rSigInfo) {
+ return rSigInfo.SignatureLineId == getShapeModel().maSignatureId; });
+ if (pSignInfo != xSignatureInfo.end())
+ {
+ bIsSigned = true;
+ if (pSignInfo->SignatureIsValid)
+ {
+ // Signature is valid, use the 'valid' image
+ SAL_WARN_IF(!pSignInfo->ValidSignatureLineImage.is(), "oox.vml",
+ "No ValidSignatureLineImage!");
+ xGraphic = pSignInfo->ValidSignatureLineImage;
+ }
+ else
+ {
+ // Signature is invalid, use the 'invalid' image
+ SAL_WARN_IF(!pSignInfo->InvalidSignatureLineImage.is(), "oox.vml",
+ "No InvalidSignatureLineImage!");
+ xGraphic = pSignInfo->InvalidSignatureLineImage;
+ }
+ }
+ }
+ catch (css::uno::Exception&)
+ {
+ // DocumentDigitalSignatures service not available.
+ // We continue by rendering the "unsigned" shape instead.
+ }
+
+ Reference< XShape > xShape;
+ if (xGraphic.is())
+ {
+ // If available, use the signed image from the signature
+ xShape = SimpleShape::createPictureObject(rxShapes, rShapeRect, xGraphic);
+ }
+ else
+ {
+ // Create shape with the fallback "unsigned" image
+ xShape = SimpleShape::createEmbeddedPictureObject(rxShapes, rShapeRect, aGraphicPath);
+ }
+
+ // Store signature line properties
+ uno::Reference<beans::XPropertySet> xPropertySet(xShape, uno::UNO_QUERY);
+ xPropertySet->setPropertyValue("IsSignatureLine", uno::Any(true));
+ xPropertySet->setPropertyValue("SignatureLineId",
+ uno::Any(getShapeModel().maSignatureId));
+ xPropertySet->setPropertyValue(
+ "SignatureLineSuggestedSignerName",
+ uno::Any(getShapeModel().maSignatureLineSuggestedSignerName));
+ xPropertySet->setPropertyValue(
+ "SignatureLineSuggestedSignerTitle",
+ uno::Any(getShapeModel().maSignatureLineSuggestedSignerTitle));
+ xPropertySet->setPropertyValue(
+ "SignatureLineSuggestedSignerEmail",
+ uno::Any(getShapeModel().maSignatureLineSuggestedSignerEmail));
+ xPropertySet->setPropertyValue(
+ "SignatureLineSigningInstructions",
+ uno::Any(getShapeModel().maSignatureLineSigningInstructions));
+ xPropertySet->setPropertyValue(
+ "SignatureLineShowSignDate",
+ uno::Any(getShapeModel().mbSignatureLineShowSignDate));
+ xPropertySet->setPropertyValue(
+ "SignatureLineCanAddComment",
+ uno::Any(getShapeModel().mbSignatureLineCanAddComment));
+ xPropertySet->setPropertyValue("SignatureLineIsSigned", uno::Any(bIsSigned));
+
+ if (!aGraphicPath.isEmpty())
+ {
+ xGraphic = rFilter.getGraphicHelper().importEmbeddedGraphic(aGraphicPath);
+ xPropertySet->setPropertyValue("SignatureLineUnsignedImage", uno::Any(xGraphic));
+ }
+ return xShape;
+ }
+
+ // try to create a picture object
+ if( !aGraphicPath.isEmpty() )
+ {
+ Reference<XShape> xShape = SimpleShape::createEmbeddedPictureObject(rxShapes, rShapeRect, aGraphicPath);
+ // AS_CHARACTER shape: vertical orientation default is bottom, MSO default is top.
+ if ( maTypeModel.maPosition != "absolute" && maTypeModel.maPosition != "relative" )
+ PropertySet( xShape ).setAnyProperty( PROP_VertOrient, Any(text::VertOrientation::TOP));
+
+ // Apply stroke props from the type model.
+ oox::drawingml::ShapePropertyMap aPropMap(mrDrawing.getFilter().getModelObjectHelper());
+ const GraphicHelper& rGraphicHelper = mrDrawing.getFilter().getGraphicHelper();
+ maTypeModel.maStrokeModel.pushToPropMap(aPropMap, rGraphicHelper);
+ // And, fill-color properties as well...
+ maTypeModel.maFillModel.pushToPropMap(aPropMap, rGraphicHelper);
+ PropertySet(xShape).setProperties(aPropMap);
+
+ return xShape;
+ }
+
+ // default: try to create a custom shape
+ return CustomShape::implConvertAndInsert( rxShapes, rShapeRect );
+}
+
+GroupShape::GroupShape( Drawing& rDrawing ) :
+ ShapeBase( rDrawing ),
+ mxChildren( new ShapeContainer( rDrawing ) )
+{
+}
+
+GroupShape::~GroupShape()
+{
+}
+
+void GroupShape::finalizeFragmentImport()
+{
+ // basic shape processing
+ ShapeBase::finalizeFragmentImport();
+ // finalize all child shapes
+ mxChildren->finalizeFragmentImport();
+}
+
+const ShapeType* GroupShape::getChildTypeById( const OUString& rShapeId ) const
+{
+ return mxChildren->getShapeTypeById( rShapeId );
+}
+
+const ShapeBase* GroupShape::getChildById( const OUString& rShapeId ) const
+{
+ return mxChildren->getShapeById( rShapeId );
+}
+
+Reference< XShape > GroupShape::implConvertAndInsert( const Reference< XShapes >& rxShapes, const awt::Rectangle& rShapeRect ) const
+{
+ Reference< XShape > xGroupShape;
+ // check that this shape contains children and a valid coordinate system
+ ShapeParentAnchor aParentAnchor;
+ aParentAnchor.maShapeRect = rShapeRect;
+ aParentAnchor.maCoordSys = getCoordSystem();
+ if( !mxChildren->empty() && (aParentAnchor.maCoordSys.Width > 0) && (aParentAnchor.maCoordSys.Height > 0) ) try
+ {
+ xGroupShape = mrDrawing.createAndInsertXShape( "com.sun.star.drawing.GroupShape", rxShapes, rShapeRect );
+ Reference< XShapes > xChildShapes( xGroupShape, UNO_QUERY_THROW );
+ mxChildren->convertAndInsert( xChildShapes, &aParentAnchor );
+ if( !xChildShapes->hasElements() )
+ {
+ SAL_WARN("oox", "no child shape has been created - deleting the group shape");
+ rxShapes->remove( xGroupShape );
+ xGroupShape.clear();
+ }
+ }
+ catch( Exception& )
+ {
+ }
+
+ uno::Reference<beans::XPropertySet> xPropertySet;
+ if (!maTypeModel.maEditAs.isEmpty())
+ xPropertySet = uno::Reference<beans::XPropertySet>(xGroupShape, uno::UNO_QUERY);
+ if (xPropertySet.is())
+ {
+ uno::Sequence<beans::PropertyValue> aGrabBag;
+ xPropertySet->getPropertyValue("InteropGrabBag") >>= aGrabBag;
+ sal_Int32 nLength = aGrabBag.getLength();
+ aGrabBag.realloc(nLength + 1);
+ aGrabBag.getArray()[nLength] = comphelper::makePropertyValue("mso-edit-as", maTypeModel.maEditAs);
+ xPropertySet->setPropertyValue("InteropGrabBag", uno::Any(aGrabBag));
+ }
+ // Make sure group shapes are inline as well, unless there is an explicit different style.
+ PropertySet aPropertySet(xGroupShape);
+ const GraphicHelper& rGraphicHelper = mrDrawing.getFilter().getGraphicHelper();
+ lcl_SetAnchorType(aPropertySet, maTypeModel, rGraphicHelper);
+ if (!maTypeModel.maRotation.isEmpty())
+ aPropertySet.setAnyProperty(PROP_RotateAngle, Any(ConversionHelper::decodeRotation(maTypeModel.maRotation).get()));
+ return xGroupShape;
+}
+
+} // namespace oox
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-11 02:48:22 +0000