diff options
Diffstat (limited to 'sd/source/ui/dlg/copydlg.cxx')
| -rw-r--r-- | sd/source/ui/dlg/copydlg.cxx | 263 |
1 files changed, 263 insertions, 0 deletions
diff --git a/sd/source/ui/dlg/copydlg.cxx b/sd/source/ui/dlg/copydlg.cxx new file mode 100644 index 000000000..1fa8c2dab --- /dev/null +++ b/sd/source/ui/dlg/copydlg.cxx @@ -0,0 +1,263 @@ +/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ +/* + * This file is part of the LibreOffice project. + * + * This Source Code Form is subject to the terms of the Mozilla Public + * License, v. 2.0. If a copy of the MPL was not distributed with this + * file, You can obtain one at http://mozilla.org/MPL/2.0/. + * + * This file incorporates work covered by the following license notice: + * + * Licensed to the Apache Software Foundation (ASF) under one or more + * contributor license agreements. See the NOTICE file distributed + * with this work for additional information regarding copyright + * ownership. The ASF licenses this file to you under the Apache + * License, Version 2.0 (the "License"); you may not use this file + * except in compliance with the License. You may obtain a copy of + * the License at http://www.apache.org/licenses/LICENSE-2.0 . + */ + +#include <copydlg.hxx> +#include <svx/colorbox.hxx> +#include <svx/svdpagv.hxx> +#include <svx/sdangitm.hxx> +#include <sfx2/module.hxx> +#include <svx/xcolit.hxx> +#include <svl/intitem.hxx> + +#include <unotools/viewoptions.hxx> +#include <svtools/unitconv.hxx> +#include <o3tl/string_view.hxx> + +#include <sdattr.hrc> +#include <View.hxx> +#include <drawdoc.hxx> + + +namespace sd { + +constexpr char TOKEN = ';'; + +CopyDlg::CopyDlg(weld::Window* pWindow, const SfxItemSet& rInAttrs, ::sd::View* pInView) + : SfxDialogController(pWindow, "modules/sdraw/ui/copydlg.ui", "DuplicateDialog") + , mrOutAttrs(rInAttrs) + , maUIScale(pInView->GetDoc().GetUIScale()) + , mpView(pInView) + , m_xNumFldCopies(m_xBuilder->weld_spin_button("copies")) + , m_xBtnSetViewData(m_xBuilder->weld_button("viewdata")) + , m_xMtrFldMoveX(m_xBuilder->weld_metric_spin_button("x", FieldUnit::CM)) + , m_xMtrFldMoveY(m_xBuilder->weld_metric_spin_button("y", FieldUnit::CM)) + , m_xMtrFldAngle(m_xBuilder->weld_metric_spin_button("angle", FieldUnit::DEGREE)) + , m_xMtrFldWidth(m_xBuilder->weld_metric_spin_button("width", FieldUnit::CM)) + , m_xMtrFldHeight(m_xBuilder->weld_metric_spin_button("height", FieldUnit::CM)) + , m_xFtEndColor(m_xBuilder->weld_label("endlabel")) + , m_xBtnSetDefault(m_xBuilder->weld_button("default")) + , m_xLbStartColor(new ColorListBox(m_xBuilder->weld_menu_button("start"), [this]{ return m_xDialog.get(); } )) + , m_xLbEndColor(new ColorListBox(m_xBuilder->weld_menu_button("end"), [this]{ return m_xDialog.get(); } )) +{ + m_xLbStartColor->SetSelectHdl( LINK( this, CopyDlg, SelectColorHdl ) ); + m_xBtnSetViewData->connect_clicked( LINK( this, CopyDlg, SetViewData ) ); + m_xBtnSetDefault->connect_clicked( LINK( this, CopyDlg, SetDefault ) ); + + FieldUnit eFUnit( SfxModule::GetCurrentFieldUnit() ); + + SetFieldUnit( *m_xMtrFldMoveX, eFUnit, true ); + SetFieldUnit( *m_xMtrFldMoveY, eFUnit, true ); + SetFieldUnit( *m_xMtrFldWidth, eFUnit, true ); + SetFieldUnit( *m_xMtrFldHeight, eFUnit, true ); + + Reset(); +} + +CopyDlg::~CopyDlg() +{ + SvtViewOptions aDlgOpt(EViewType::Dialog, OStringToOUString(m_xDialog->get_help_id(), RTL_TEXTENCODING_UTF8)); + OUString sStr = + OUString::number(m_xNumFldCopies->get_value()) + OUStringChar(TOKEN) + + OUString::number(m_xMtrFldMoveX->get_value(FieldUnit::NONE)) + OUStringChar(TOKEN) + + OUString::number(m_xMtrFldMoveY->get_value(FieldUnit::NONE)) + OUStringChar(TOKEN) + + OUString::number(m_xMtrFldAngle->get_value(FieldUnit::NONE)) + OUStringChar(TOKEN) + + OUString::number(m_xMtrFldWidth->get_value(FieldUnit::NONE)) + OUStringChar(TOKEN) + + OUString::number(m_xMtrFldHeight->get_value(FieldUnit::NONE)) + OUStringChar(TOKEN) + + OUString::number(static_cast<sal_uInt32>(m_xLbStartColor->GetSelectEntryColor())) + OUStringChar(TOKEN) + + OUString::number(static_cast<sal_uInt32>(m_xLbEndColor->GetSelectEntryColor())); + aDlgOpt.SetUserItem("UserItem", css::uno::Any(sStr)); +} + +/** + * reads provided item set or evaluate ini string + */ +void CopyDlg::Reset() +{ + // Set Min/Max values + ::tools::Rectangle aRect = mpView->GetAllMarkedRect(); + Size aPageSize = mpView->GetSdrPageView()->GetPage()->GetSize(); + + // tdf#125011 draw/impress sizes are in mm_100th already, "normalize" to + // decimal shift by number of decimal places the widgets are using (2) then + // scale by the ui scaling factor + auto nPageWidth = tools::Long(m_xMtrFldMoveX->normalize(aPageSize.Width()) / maUIScale); + auto nPageHeight = tools::Long(m_xMtrFldMoveX->normalize(aPageSize.Height()) / maUIScale); + auto nRectWidth = tools::Long(m_xMtrFldMoveX->normalize(aRect.GetWidth()) / maUIScale); + auto nRectHeight = tools::Long(m_xMtrFldMoveX->normalize(aRect.GetHeight()) / maUIScale); + + m_xMtrFldMoveX->set_range(-nPageWidth, nPageWidth, FieldUnit::MM_100TH); + m_xMtrFldMoveY->set_range(-nPageHeight, nPageHeight, FieldUnit::MM_100TH); + m_xMtrFldWidth->set_range(-nRectWidth, nPageWidth, FieldUnit::MM_100TH); + m_xMtrFldHeight->set_range(-nRectHeight, nPageHeight, FieldUnit::MM_100TH); + + OUString aStr; + SvtViewOptions aDlgOpt(EViewType::Dialog, OStringToOUString(m_xDialog->get_help_id(), RTL_TEXTENCODING_UTF8)); + if (aDlgOpt.Exists()) + { + css::uno::Any aUserItem = aDlgOpt.GetUserItem("UserItem"); + aUserItem >>= aStr; + } + + if (aStr.isEmpty()) + { + if( const SfxUInt16Item* pPoolItem = mrOutAttrs.GetItemIfSet( ATTR_COPY_NUMBER ) ) + m_xNumFldCopies->set_value(pPoolItem->GetValue()); + else + m_xNumFldCopies->set_value(1); + + tools::Long nMoveX = 500; + if( const SfxInt32Item* pPoolItem = mrOutAttrs.GetItemIfSet( ATTR_COPY_MOVE_X ) ) + nMoveX = pPoolItem->GetValue(); + SetMetricValue( *m_xMtrFldMoveX, tools::Long(nMoveX / maUIScale), MapUnit::Map100thMM); + + tools::Long nMoveY = 500; + if( const SfxInt32Item* pPoolItem = mrOutAttrs.GetItemIfSet( ATTR_COPY_MOVE_Y ) ) + nMoveY = pPoolItem->GetValue(); + SetMetricValue( *m_xMtrFldMoveY, tools::Long(nMoveY / maUIScale), MapUnit::Map100thMM); + + if( const SdrAngleItem* pPoolItem = mrOutAttrs.GetItemIfSet( ATTR_COPY_ANGLE ) ) + m_xMtrFldAngle->set_value( pPoolItem->GetValue().get(), FieldUnit::NONE); + else + m_xMtrFldAngle->set_value(0, FieldUnit::NONE); + + tools::Long nWidth = 0; + if( const SfxInt32Item* pPoolItem = mrOutAttrs.GetItemIfSet( ATTR_COPY_WIDTH ) ) + nWidth = pPoolItem->GetValue(); + SetMetricValue( *m_xMtrFldWidth, tools::Long(nWidth / maUIScale), MapUnit::Map100thMM); + + tools::Long nHeight = 0; + if( const SfxInt32Item* pPoolItem = mrOutAttrs.GetItemIfSet( ATTR_COPY_HEIGHT ) ) + nHeight = pPoolItem->GetValue(); + SetMetricValue( *m_xMtrFldHeight, tools::Long(nHeight / maUIScale), MapUnit::Map100thMM); + + if( const XColorItem* pPoolItem = mrOutAttrs.GetItemIfSet( ATTR_COPY_START_COLOR ) ) + { + Color aColor = pPoolItem->GetColorValue(); + m_xLbStartColor->SelectEntry( aColor ); + m_xLbEndColor->SelectEntry( aColor ); + } + else + { + m_xLbStartColor->SetNoSelection(); + m_xLbEndColor->SetNoSelection(); + m_xLbEndColor->set_sensitive(false); + m_xFtEndColor->set_sensitive(false); + } + } + else + { + sal_Int32 nIdx {0}; + m_xNumFldCopies->set_value(o3tl::toInt64(o3tl::getToken(aStr, 0, TOKEN, nIdx))); + m_xMtrFldMoveX->set_value(o3tl::toInt64(o3tl::getToken(aStr, 0, TOKEN, nIdx)), FieldUnit::NONE); + m_xMtrFldMoveY->set_value(o3tl::toInt64(o3tl::getToken(aStr, 0, TOKEN, nIdx)), FieldUnit::NONE); + m_xMtrFldAngle->set_value(o3tl::toInt64(o3tl::getToken(aStr, 0, TOKEN, nIdx)), FieldUnit::NONE); + m_xMtrFldWidth->set_value(o3tl::toInt64(o3tl::getToken(aStr, 0, TOKEN, nIdx)), FieldUnit::NONE); + m_xMtrFldHeight->set_value(o3tl::toInt64(o3tl::getToken(aStr, 0, TOKEN, nIdx)), FieldUnit::NONE); + m_xLbStartColor->SelectEntry( Color( ColorTransparency, o3tl::toUInt32(o3tl::getToken(aStr, 0, TOKEN, nIdx)) ) ); + m_xLbEndColor->SelectEntry( Color( ColorTransparency, o3tl::toUInt32(o3tl::getToken(aStr, 0, TOKEN, nIdx)) ) ); + } + +} + +/** + * fills provided item set with dialog box attributes + */ +void CopyDlg::GetAttr( SfxItemSet& rOutAttrs ) +{ + tools::Long nMoveX = tools::Long( GetCoreValue( *m_xMtrFldMoveX, MapUnit::Map100thMM) * maUIScale); + tools::Long nMoveY = tools::Long( GetCoreValue( *m_xMtrFldMoveY, MapUnit::Map100thMM) * maUIScale); + tools::Long nHeight = tools::Long( GetCoreValue( *m_xMtrFldHeight, MapUnit::Map100thMM) * maUIScale); + tools::Long nWidth = tools::Long( GetCoreValue( *m_xMtrFldWidth, MapUnit::Map100thMM) * maUIScale); + + rOutAttrs.Put( SfxUInt16Item( ATTR_COPY_NUMBER, static_cast<sal_uInt16>(m_xNumFldCopies->get_value()) ) ); + rOutAttrs.Put( SfxInt32Item( ATTR_COPY_MOVE_X, nMoveX ) ); + rOutAttrs.Put( SfxInt32Item( ATTR_COPY_MOVE_Y, nMoveY ) ); + rOutAttrs.Put( SdrAngleItem( ATTR_COPY_ANGLE, Degree100(static_cast<sal_Int32>(m_xMtrFldAngle->get_value(FieldUnit::DEGREE))) ) ); + rOutAttrs.Put( SfxInt32Item( ATTR_COPY_WIDTH, nWidth ) ); + rOutAttrs.Put( SfxInt32Item( ATTR_COPY_HEIGHT, nHeight ) ); + + NamedColor aColor = m_xLbStartColor->GetSelectedEntry(); + rOutAttrs.Put(XColorItem(ATTR_COPY_START_COLOR, aColor.second, aColor.first)); + aColor = m_xLbEndColor->GetSelectedEntry(); + rOutAttrs.Put(XColorItem(ATTR_COPY_END_COLOR, aColor.second, aColor.first)); +} + +/** + * enables and selects end color LB + */ +IMPL_LINK_NOARG(CopyDlg, SelectColorHdl, ColorListBox&, void) +{ + const Color aColor = m_xLbStartColor->GetSelectEntryColor(); + + if (!m_xLbEndColor->get_sensitive()) + { + m_xLbEndColor->SelectEntry(aColor); + m_xLbEndColor->set_sensitive(true); + m_xFtEndColor->set_sensitive(true); + } +} + +/** + * sets values of selection + */ +IMPL_LINK_NOARG(CopyDlg, SetViewData, weld::Button&, void) +{ + ::tools::Rectangle aRect = mpView->GetAllMarkedRect(); + + SetMetricValue( *m_xMtrFldMoveX, tools::Long( aRect.GetWidth() / + maUIScale ), MapUnit::Map100thMM); + SetMetricValue( *m_xMtrFldMoveY, tools::Long( aRect.GetHeight() / + maUIScale ), MapUnit::Map100thMM); + + // sets color attribute + if( const XColorItem* pPoolItem = mrOutAttrs.GetItemIfSet( ATTR_COPY_START_COLOR ) ) + { + Color aColor = pPoolItem->GetColorValue(); + m_xLbStartColor->SelectEntry( aColor ); + } +} + +/** + * resets values to default + */ +IMPL_LINK_NOARG(CopyDlg, SetDefault, weld::Button&, void) +{ + m_xNumFldCopies->set_value(1); + + tools::Long nValue = 500; + SetMetricValue( *m_xMtrFldMoveX, tools::Long(nValue / maUIScale), MapUnit::Map100thMM); + SetMetricValue( *m_xMtrFldMoveY, tools::Long(nValue / maUIScale), MapUnit::Map100thMM); + + nValue = 0; + m_xMtrFldAngle->set_value(nValue, FieldUnit::DEGREE); + SetMetricValue( *m_xMtrFldWidth, tools::Long(nValue / maUIScale), MapUnit::Map100thMM); + SetMetricValue( *m_xMtrFldHeight, tools::Long(nValue / maUIScale), MapUnit::Map100thMM); + + // set color attribute + if( const XColorItem* pPoolItem = mrOutAttrs.GetItemIfSet( ATTR_COPY_START_COLOR ) ) + { + Color aColor = pPoolItem->GetColorValue(); + m_xLbStartColor->SelectEntry( aColor ); + m_xLbEndColor->SelectEntry( aColor ); + } +} + +} // end of namespace sd + +/* vim:set shiftwidth=4 softtabstop=4 expandtab: */ |