diff options
Diffstat (limited to 'sd/source/ui/dlg/sdpreslt.cxx')
-rw-r--r-- | sd/source/ui/dlg/sdpreslt.cxx | 267 |
1 files changed, 267 insertions, 0 deletions
diff --git a/sd/source/ui/dlg/sdpreslt.cxx b/sd/source/ui/dlg/sdpreslt.cxx new file mode 100644 index 000000000..dd54611e2 --- /dev/null +++ b/sd/source/ui/dlg/sdpreslt.cxx @@ -0,0 +1,267 @@ +/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ +/* + * This file is part of the LibreOffice project. + * + * This Source Code Form is subject to the terms of the Mozilla Public + * License, v. 2.0. If a copy of the MPL was not distributed with this + * file, You can obtain one at http://mozilla.org/MPL/2.0/. + * + * This file incorporates work covered by the following license notice: + * + * Licensed to the Apache Software Foundation (ASF) under one or more + * contributor license agreements. See the NOTICE file distributed + * with this work for additional information regarding copyright + * ownership. The ASF licenses this file to you under the Apache + * License, Version 2.0 (the "License"); you may not use this file + * except in compliance with the License. You may obtain a copy of + * the License at http://www.apache.org/licenses/LICENSE-2.0 . + */ + +#include <svl/itemset.hxx> +#include <svl/eitem.hxx> +#include <svl/stritem.hxx> +#include <sfx2/new.hxx> +#include <svtools/valueset.hxx> +#include <tools/debug.hxx> +#include <vcl/image.hxx> + +#include <strings.hrc> + +#include <bitmaps.hlst> +#include <sdpreslt.hxx> +#include <sdattr.hrc> +#include <sdresid.hxx> +#include <drawdoc.hxx> +#include <sdpage.hxx> +#include <DrawDocShell.hxx> +#include <memory> + +SdPresLayoutDlg::SdPresLayoutDlg(::sd::DrawDocShell* pDocShell, + weld::Window* pWindow, const SfxItemSet& rInAttrs) + : GenericDialogController(pWindow, "modules/simpress/ui/slidedesigndialog.ui", "SlideDesignDialog") + , mpDocSh(pDocShell) + , mrOutAttrs(rInAttrs) + , maStrNone(SdResId(STR_NULL)) + , m_xCbxMasterPage(m_xBuilder->weld_check_button("masterpage")) + , m_xCbxCheckMasters(m_xBuilder->weld_check_button("checkmasters")) + , m_xBtnLoad(m_xBuilder->weld_button("load")) + , m_xVS(new ValueSet(m_xBuilder->weld_scrolled_window("selectwin", true))) + , m_xVSWin(new weld::CustomWeld(*m_xBuilder, "select", *m_xVS)) +{ + m_xVSWin->set_size_request(m_xBtnLoad->get_approximate_digit_width() * 60, + m_xBtnLoad->get_text_height() * 20); + + m_xVS->SetDoubleClickHdl(LINK(this, SdPresLayoutDlg, ClickLayoutHdl)); + m_xBtnLoad->connect_clicked(LINK(this, SdPresLayoutDlg, ClickLoadHdl)); + + Reset(); +} + +SdPresLayoutDlg::~SdPresLayoutDlg() +{ +} + +/** + * Initialize + */ +void SdPresLayoutDlg::Reset() +{ + tools::Long nName; + + // replace master page + if( const SfxBoolItem* pPoolItem = mrOutAttrs.GetItemIfSet( ATTR_PRESLAYOUT_MASTER_PAGE, false ) ) + { + bool bMasterPage = pPoolItem->GetValue(); + m_xCbxMasterPage->set_sensitive( !bMasterPage ); + m_xCbxMasterPage->set_active( bMasterPage ); + } + + // remove not used master pages + m_xCbxCheckMasters->set_active(false); + + if( const SfxStringItem* pPoolItem = mrOutAttrs.GetItemIfSet(ATTR_PRESLAYOUT_NAME) ) + maName = pPoolItem->GetValue(); + else + maName.clear(); + + FillValueSet(); + + mnLayoutCount = maLayoutNames.size(); + for( nName = 0; nName < mnLayoutCount; nName++ ) + { + if (maLayoutNames[nName] == maName) + break; + } + DBG_ASSERT(nName < mnLayoutCount, "Layout not found"); + + m_xVS->SelectItem(static_cast<sal_uInt16>(nName) + 1); // Indices of the ValueSets start at 1 + +} + +/** + * Fills the provided Item-Set with dialog box attributes + */ +void SdPresLayoutDlg::GetAttr(SfxItemSet& rOutAttrs) +{ + short nId = m_xVS->GetSelectedItemId(); + bool bLoad = nId > mnLayoutCount; + rOutAttrs.Put( SfxBoolItem( ATTR_PRESLAYOUT_LOAD, bLoad ) ); + + OUString aLayoutName; + + if( bLoad ) + { + aLayoutName = maName + "#" + maLayoutNames[ nId - 1 ]; + } + else if (nId) + { + aLayoutName = maLayoutNames[ nId - 1 ]; + if( aLayoutName == maStrNone ) + aLayoutName.clear(); // that way we encode "- nothing -" (see below) + } + + rOutAttrs.Put( SfxStringItem( ATTR_PRESLAYOUT_NAME, aLayoutName ) ); + rOutAttrs.Put( SfxBoolItem( ATTR_PRESLAYOUT_MASTER_PAGE, m_xCbxMasterPage->get_active() ) ); + rOutAttrs.Put( SfxBoolItem( ATTR_PRESLAYOUT_CHECK_MASTERS, m_xCbxCheckMasters->get_active() ) ); +} + +/** + * Fills ValueSet with bitmaps + */ +void SdPresLayoutDlg::FillValueSet() +{ + m_xVS->SetStyle(m_xVS->GetStyle() | WB_ITEMBORDER | WB_DOUBLEBORDER + | WB_VSCROLL | WB_NAMEFIELD); + + m_xVS->SetColCount(2); + m_xVS->SetLineCount(2); + m_xVS->SetExtraSpacing(2); + + SdDrawDocument* pDoc = mpDocSh->GetDoc(); + + sal_uInt16 nCount = pDoc->GetMasterPageCount(); + + for (sal_uInt16 nLayout = 0; nLayout < nCount; nLayout++) + { + SdPage* pMaster = static_cast<SdPage*>(pDoc->GetMasterPage(nLayout)); + if (pMaster->GetPageKind() == PageKind::Standard) + { + OUString aLayoutName(pMaster->GetLayoutName()); + aLayoutName = aLayoutName.copy(0, aLayoutName.indexOf(SD_LT_SEPARATOR)); + maLayoutNames.push_back(aLayoutName); + + Image aBitmap(mpDocSh->GetPagePreviewBitmap(pMaster)); + m_xVS->InsertItem(static_cast<sal_uInt16>(maLayoutNames.size()), aBitmap, aLayoutName); + } + } + + m_xVS->Show(); +} + +/** + * DoubleClick handler + */ +IMPL_LINK_NOARG(SdPresLayoutDlg, ClickLayoutHdl, ValueSet*, void) +{ + m_xDialog->response(RET_OK); +} + +/** + * Click handler for load button + */ +IMPL_LINK_NOARG(SdPresLayoutDlg, ClickLoadHdl, weld::Button&, void) +{ + SfxNewFileDialog aDlg(m_xDialog.get(), SfxNewFileDialogMode::Preview); + aDlg.set_title(SdResId(STR_LOAD_PRESENTATION_LAYOUT)); + sal_uInt16 nResult = aDlg.run(); + + bool bCancel = false; + + switch (nResult) + { + case RET_OK: + { + if (aDlg.IsTemplate()) + { + maName = aDlg.GetTemplateFileName(); + } + else + { + // that way we encode "- nothing -" + maName.clear(); + } + } + break; + + default: + bCancel = true; + } + + if( bCancel ) + return; + + // check if template already exists + OUString aCompareStr(maName); + if (aCompareStr.isEmpty()) + aCompareStr = maStrNone; + + auto it = std::find(maLayoutNames.begin(), maLayoutNames.end(), aCompareStr); + if (it != maLayoutNames.end()) + { + sal_uInt16 aPos = static_cast<sal_uInt16>(std::distance(maLayoutNames.begin(), it)); + // select template + m_xVS->SelectItem( aPos + 1 ); + } + else + { + // load document in order to determine preview bitmap (if template is selected) + if (!maName.isEmpty()) + { + // determine document in order to call OpenBookmarkDoc + SdDrawDocument* pDoc = mpDocSh->GetDoc(); + SdDrawDocument* pTemplDoc = pDoc->OpenBookmarkDoc( maName ); + + if (pTemplDoc) + { + ::sd::DrawDocShell* pTemplDocSh= pTemplDoc->GetDocSh(); + + sal_uInt16 nCount = pTemplDoc->GetMasterPageCount(); + + for (sal_uInt16 nLayout = 0; nLayout < nCount; nLayout++) + { + SdPage* pMaster = static_cast<SdPage*>( pTemplDoc->GetMasterPage(nLayout) ); + if (pMaster->GetPageKind() == PageKind::Standard) + { + OUString aLayoutName(pMaster->GetLayoutName()); + aLayoutName = aLayoutName.copy(0, aLayoutName.indexOf(SD_LT_SEPARATOR)); + maLayoutNames.push_back(aLayoutName); + + Image aBitmap(pTemplDocSh->GetPagePreviewBitmap(pMaster)); + m_xVS->InsertItem(static_cast<sal_uInt16>(maLayoutNames.size()), aBitmap, aLayoutName); + } + } + } + else + { + bCancel = true; + } + + pDoc->CloseBookmarkDoc(); + } + else + { + // empty layout + maLayoutNames.push_back(maStrNone); + m_xVS->InsertItem( static_cast<sal_uInt16>(maLayoutNames.size()), + Image(BMP_SLIDE_NONE), maStrNone ); + } + + if (!bCancel) + { + // select template + m_xVS->SelectItem( static_cast<sal_uInt16>(maLayoutNames.size()) ); + } + } +} + +/* vim:set shiftwidth=4 softtabstop=4 expandtab: */ |