diff options
Diffstat (limited to '')
| -rw-r--r-- | solenv/gbuild/Helper.mk | 354 |
1 files changed, 354 insertions, 0 deletions
diff --git a/solenv/gbuild/Helper.mk b/solenv/gbuild/Helper.mk new file mode 100644 index 000000000..a0441dc3a --- /dev/null +++ b/solenv/gbuild/Helper.mk @@ -0,0 +1,354 @@ +# -*- Mode: makefile-gmake; tab-width: 4; indent-tabs-mode: t -*- +# +# This file is part of the LibreOffice project. +# +# This Source Code Form is subject to the terms of the Mozilla Public +# License, v. 2.0. If a copy of the MPL was not distributed with this +# file, You can obtain one at http://mozilla.org/MPL/2.0/. +# +# This file incorporates work covered by the following license notice: +# +# Licensed to the Apache Software Foundation (ASF) under one or more +# contributor license agreements. See the NOTICE file distributed +# with this work for additional information regarding copyright +# ownership. The ASF licenses this file to you under the Apache +# License, Version 2.0 (the "License"); you may not use this file +# except in compliance with the License. You may obtain a copy of +# the License at http://www.apache.org/licenses/LICENSE-2.0 . +# + +gb_Helper_MISC := $(WORKDIR)/Misc + +# general purpose phony target +gb_Helper_PHONY := $(gb_Helper_MISC)/PHONY + +# general purpose empty dummy target +gb_Helper_MISCDUMMY := $(gb_Helper_MISC)/DUMMY + +# target for reacting to changes in the list of configured languages +gb_Helper_LANGSTARGET := $(BUILDDIR)/config_$(gb_Side)_lang.mk.stamp + +.PHONY : $(WORKDIR)/Misc/PHONY +$(gb_Helper_MISCDUMMY) : + @mkdir -p $(dir $@) && touch $@ + +ifeq ($(SRCDIR),$(BUILDDIR)) +define gb_Helper_abbreviate_dirs +S=$(SRCDIR) && \ +$(subst $(SRCDIR)/,$$S/,I=$(INSTDIR)) && \ +$(subst $(SRCDIR)/,$$S/,W=$(WORKDIR)) && \ +$(subst $(SRCDIR)/,$$S/,$(subst $(INSTDIR)/,$$I/,$(subst $(WORKDIR)/,$$W/,$(1)))) +endef +else +define gb_Helper_abbreviate_dirs +S=$(SRCDIR) && \ +$(subst $(SRCDIR)/,$$S/,B=$(BUILDDIR)) && \ +$(subst $(SRCDIR)/,$$S/,$(subst $(BUILDDIR)/,$$B/,I=$(INSTDIR))) && \ +$(subst $(SRCDIR)/,$$S/,$(subst $(BUILDDIR)/,$$B/,W=$(WORKDIR))) && \ +$(subst $(SRCDIR)/,$$S/,$(subst $(BUILDDIR)/,$$B/,$(subst $(INSTDIR)/,$$I/,$(subst $(WORKDIR)/,$$W/,$(1))))) +endef +endif + +define gb_Helper_abbreviate_dirs_native +$(call gb_Output_error,gb_Helper_abbreviate_dirs_native: use gb_Helper_abbreviate_dirs instead.) +endef + +define gb_Helper_native_path +$(call gb_Output_error,gb_Helper_native_path: Do not use. Should not be necessary.) +endef + +# cygwin seems to eat one backslash when executing command, thus replace with '\\' +define gb_Helper_windows_path +$(subst /,\\,$(1)) +endef + +define gb_Helper_make_clean_target +gb_$(1)_get_clean_target = $(WORKDIR)/Clean/$(1)/$$(1) + +endef + +define gb_Helper_make_dep_target +gb_$(1)_get_dep_target = $(WORKDIR)/Dep/$(1)/$$(1).d + +endef + +define gb_Helper_make_clean_targets +$(foreach targettype,$(1),\ + $(call gb_Helper_make_clean_target,$(targettype))) + +endef + +define gb_Helper_make_dep_targets +$(foreach targettype,$(1),\ + $(call gb_Helper_make_dep_target,$(targettype))) + +endef + +# e.g. 'make CppunitTest_sw_macros_test' +# +# gb_Helper_make_userfriendly_targets target class build-target? clean-target? +define gb_Helper_make_userfriendly_targets +.PHONY: $(2) $(2)_$(1) $(2)_$(1).clean +$(2): $(2)_$(1) +$(2)_$(1) : $(if $(3),$(3),$(call gb_$(2)_get_target,$(1))) +$(2)_$(1).clean : $(if $(4),$(4),$(call gb_$(2)_get_clean_target,$(1))) + +endef + +define gb_Helper_init_registries +gb_Executable_VALIDGROUPS_INSTALLED := UREBIN SDK OOO +gb_Executable_VALIDGROUPS_NOTINSTALLED := NONE +gb_Executable_VALIDGROUPS := UREBIN SDK OOO NONE +gb_Library_VALIDGROUPS_INSTALLED := OOOLIBS PLAINLIBS_URE PLAINLIBS_OOO PRIVATELIBS_URE RTVERLIBS UNOVERLIBS PLAINLIBS_SHLXTHDL +gb_Library_VALIDGROUPS_NOTINSTALLED := PLAINLIBS_NONE PLAINLIBS_OXT EXTENSIONLIBS +gb_Library_VALIDGROUPS := OOOLIBS PLAINLIBS_URE PLAINLIBS_OOO PRIVATELIBS_URE RTVERLIBS UNOVERLIBS PLAINLIBS_SHLXTHDL PLAINLIBS_NONE PLAINLIBS_OXT EXTENSIONLIBS +gb_Jar_VALIDGROUPS_INSTALLED := URE OOO +gb_Jar_VALIDGROUPS_NOTINSTALLED := OXT NONE +gb_Jar_VALIDGROUPS := URE OOO OXT NONE + +$$(foreach group,$$(gb_Executable_VALIDGROUPS),$$(eval gb_Executable_$$(group) :=)) +$$(foreach group,$$(gb_Library_VALIDGROUPS),$$(eval gb_Library_$$(group) :=)) +$$(foreach group,$$(gb_Jar_VALIDGROUPS),$$(eval gb_Jar_$$(group) :=)) + +endef + +define gb_Helper_collect_knownlibs +gb_Library_KNOWNLIBS := $$(foreach group,$$(gb_Library_VALIDGROUPS),$$(gb_Library_$$(group))) +gb_Executable_KNOWN := $$(foreach group,$$(gb_Executable_VALIDGROUPS),$$(gb_Executable_$$(group))) +gb_Jar_KNOWN := $$(foreach group,$$(gb_Jar_VALIDGROUPS),$$(gb_Jar_$$(group))) +gb_Fuzzers_KNOWN := $$(filter %fuzzer,$$(foreach group,$$(gb_Executable_VALIDGROUPS),$$(gb_Executable_$$(group)))) + +endef + +define gb_Helper_process_executable_registrations +$(foreach group,$(gb_Executable_VALIDGROUPS),\ + $(foreach executable,$(gb_Executable_$(group)),\ + $(if $(filter-out undefined,$(origin gb_Executable__register_$(executable))),\ + $(call gb_Executable__register_$(executable))))) + +endef + +define gb_Helper__register_executables +$(foreach group,$(gb_Executable_VALIDGROUPS),\ + $(foreach target,$(2),\ + $(if $(filter $(target),$(gb_Executable_$(group))),\ + $(call gb_Output_error,gb_Helper_register_executables: already registered: $(target))))) +$(if $(filter-out $(words $(2)),$(words $(sort $(2)))),\ + $(call gb_Output_error,gb_Helper_register_executables: contains duplicates: $(2))) + +gb_Executable_$(1) += $(2) + +endef + +# $(call gb_Helper_register_executables,layer,exes) +define gb_Helper_register_executables +ifeq ($$(filter $(1),$$(gb_Executable_VALIDGROUPS_NOTINSTALLED)),) +$$(eval $$(call gb_Output_error,$(1) is not a valid group for executables that are not installed. Valid groups are: $$(gb_Executable_VALIDGROUPS_NOTINSTALLED). Use gb_Helper_register_executables_for_install for installed executables.)) +endif +$(call gb_Helper__register_executables,$(1),$(2)) + +endef + +# $(call gb_Helper_register_executables_for_install,layer,installmodule,exes) +define gb_Helper_register_executables_for_install +$(if $(3),,$(call gb_Output_error,gb_Helper_register_executables_for_install: no executables - need 3 parameters)) +ifeq ($$(filter $(1),$$(gb_Executable_VALIDGROUPS_INSTALLED)),) +$$(eval $$(call gb_Output_error,$(1) is not a valid group for installed executables. Valid groups are: $$(gb_Executable_VALIDGROUPS_INSTALLED). Use gb_Helper_register_executables for executables that are not installed.)) +endif +$(call gb_Helper__register_executables,$(1),$(3)) + +gb_Executable_MODULE_$(2) += $(3) + +endef + +define gb_Helper__register_libraries +$(foreach group,$(gb_Library_VALIDGROUPS),\ + $(foreach target,$(2),\ + $(if $(filter $(target),$(gb_Library_$(group))),\ + $(call gb_Output_error,gb_Helper_register_libraries: already registered: $(target))))) +$(if $(filter-out $(words $(2)),$(words $(sort $(2)))),\ + $(call gb_Output_error,gb_Helper_register_libraries: contains duplicates: $(2))) + +gb_Library_$(1) += $(2) + +endef + +# $(call gb_Helper_register_libraries,layer,libs) +define gb_Helper_register_libraries +ifeq ($$(filter $(1),$$(gb_Library_VALIDGROUPS_NOTINSTALLED)),) +$$(eval $$(call gb_Output_error,$(1) is not a valid group for libraries that are not installed. Valid groups are: $$(gb_Library_VALIDGROUPS_NOTINSTALLED). Use gb_Helper_register_libraries_for_install for installed libraries.)) +endif +$(call gb_Helper__register_libraries,$(1),$(2)) + +endef + +# the first argument is the group, which sets rpaths etc. +# the second argument is the install module, which describes in which distro package/msi a lib should show up +# UGLY: for versioned libraries "sdk" module is hard-coded for now +# $(call gb_Helper_register_libraries_for_install,layer,installmodule,libs) +define gb_Helper_register_libraries_for_install +$(if $(3),,$(call gb_Output_error,gb_Helper_register_libraries_for_install: no libraries - need 3 parameters)) +ifeq ($$(filter $(1),$$(gb_Library_VALIDGROUPS_INSTALLED)),) +$$(eval $$(call gb_Output_error,$(1) is not a valid group for installed libraries. Valid groups are: $$(gb_Library_VALIDGROUPS_INSTALLED). Use gb_Helper_register_libraries for libraries that are not installed.)) +endif +$(call gb_Helper__register_libraries,$(1),$(3)) + +gb_Library_MODULE_$(2) += $(filter-out $(gb_MERGEDLIBS),$(3)) + +$(if $(filter UNOVERLIBS RTVERLIBS,$(1)),\ + gb_SdkLinkLibrary_MODULE_sdk += $(3)) + +endef + +# a plugin is a library, why can't be dynamically linked and must be dlopen'd, but must be linked static +define gb_Helper_register_plugins_for_install +$(call gb_Helper_register_libraries_for_install,$(1),$(2),$(3)) +gb_Library_KNOWNPLUGINS += $(3) + +endef + +define gb_Helper__register_jars +$(foreach group,$(gb_Jar_VALIDGROUPS),\ + $(foreach target,$(2),\ + $(if $(filter $(target),$(gb_Jar_$(group))),\ + $(call gb_Output_error,gb_Helper_register_jars: already registered: $(target))))) +$(if $(filter-out $(words $(2)),$(words $(sort $(2)))),\ + $(call gb_Output_error,gb_Helper_register_jars: contains duplicates: $(2))) + +gb_Jar_$(1) += $(2) + +endef + +# $(call gb_Helper_register_jars,layer,jars) +define gb_Helper_register_jars +ifeq ($$(filter $(1),$$(gb_Jar_VALIDGROUPS_NOTINSTALLED)),) +$$(eval $$(call gb_Output_error,$(1) is not a valid group for jars that are not installed. Valid groups are: $$(gb_Jar_VALIDGROUPS_NOTINSTALLED). Use gb_Helper_register_jars_for_install for installed jars.)) +endif +$(call gb_Helper__register_jars,$(1),$(2)) + +endef + +# $(call gb_Helper_register_jars_for_install,layer,installmodule,jars) +define gb_Helper_register_jars_for_install +$(if $(3),,$(call gb_Output_error,gb_Helper_register_jars_for_install: no jars - need 3 parameters)) +ifeq ($$(filter $(1),$$(gb_Jar_VALIDGROUPS_INSTALLED)),) +$$(eval $$(call gb_Output_error,$(1) is not a valid group for installed jars. Valid groups are: $$(gb_Jar_VALIDGROUPS_INSTALLED). Use gb_Helper_register_jars for jars that are not installed.)) +endif +$(call gb_Helper__register_jars,$(1),$(3)) + +gb_Jar_MODULE_$(2) += $(3) + +endef + +define gb_Helper__register_packages +$(foreach target,$(1),\ + $(if $(filter $(target),$(gb_Package_REGISTERED)),\ + $(call gb_Output_error,gb_Helper_register_packages: already registered: $(target)))) +$(if $(filter-out $(words $(1)),$(words $(sort $(1)))),\ + $(call gb_Output_error,gb_Helper_register_packages: contains duplicates: $(1))) + +gb_Package_REGISTERED += $(1) + +endef + +# $(call gb_Helper_register_packages,packages) +define gb_Helper_register_packages +$(call gb_Helper__register_packages,$(1)) + +endef + +# $(call gb_Helper_register_packages_for_install,installmodule,packages) +define gb_Helper_register_packages_for_install +$(if $(2),,$(call gb_Output_error,gb_Helper_register_packages_for_install: no packages - need 2 parameters)) +$(call gb_Helper__register_packages,$(2)) + +gb_Package_MODULE_$(1) += $(2) + +endef + +define gb_Helper_register_mos +gb_AllLangMoTarget_REGISTERED += $(1) + +endef + +# TODO: this should be extended to handle auto-installation. +define gb_Helper_register_uiconfigs +gb_UIConfig_REGISTERED += $(1) + +endef + +define gb_Helper_get_imagelists +$(foreach ui,$(gb_UIConfig_REGISTERED),$(call gb_UIConfig_get_imagelist_target,$(ui))) +endef + +# call gb_Helper_replace_if_different_and_touch,source,target,optional-touch-reference-file +define gb_Helper_replace_if_different_and_touch +if cmp -s $(1) $(2); then rm $(1); \ +else mv $(1) $(2) $(if $(3),&& touch -r $(3) $(2)); \ +fi +endef + +# call gb_Helper_copy_if_different_and_touch,source,target,optional-touch-reference-file +define gb_Helper_copy_if_different_and_touch +if ! cmp -s $(1) $(2); then \ + cp $(1) $(2) $(if $(3),&& touch -r $(3) $(2)); \ +fi +endef + +define gb_Helper_define_if_set +$(foreach def,$(1),$(if $(filter TRUE YES,$($(def))),-D$(def))) +endef + +define gb_Helper_execute +$(call gb_Executable_get_command,$(firstword $(1))) $(wordlist 2,$(words $(1)),$(1)) +endef + +# define gb_Helper_install registered-target target-to-install target-from-workdir +define gb_Helper_install +$(1) :| $(2) +$(2) : $(3) | $(dir $(2)).dir +$(call gb_Deliver_add_deliverable,$(2),$(3),$(2)) +endef + +# use if the installed target is the final target +define gb_Helper_install_final +$(1) : $(2) | $(dir $(1)).dir +$(call gb_Deliver_add_deliverable,$(1),$(2),$(1)) +endef + +# call gb_Helper_optional,build_type,if-true,if-false +define gb_Helper_optional +$(if $(filter $(1),$(BUILD_TYPE)),$(2),$(3)) +endef + +# call gb_Helper_optionals_or,build_types,if-true,if-false +define gb_Helper_optionals_or +$(call gb_Helper_optional,$(1),$(2),$(3)) +endef + +# call gb_Helper_optionals_and,build_types,if-true,if-false +define gb_Helper_optionals_and +$(if $(strip $(filter-out $(filter $(1),$(BUILD_TYPE)),$(1))),$(3),$(2)) +endef + +ifeq ($(WITH_LOCALES),) +define gb_Helper_optional_locale +$(2) +endef +else +define gb_Helper_optional_locale +$(if $(filter $(1) $(1)_%,$(WITH_LOCALES)),$(2)) +endef +endif + +define gb_Helper_print_on_error +$(if $(gb_QUIET_EXTERNAL), \ + $(if $(2), \ + ( ( $(1) ) > $(2) 2>&1 || ( cat $(2) && false ) ), \ + ( TEMPFILE=$(shell $(gb_MKTEMP)) && ( $(1) ) > $$TEMPFILE 2>&1 \ + && rm $$TEMPFILE \ + || ( cat $$TEMPFILE && rm $$TEMPFILE && false ) )), \ + ( $(1) )) +endef + +# vim: set noet sw=4 ts=4: |