diff options
Diffstat (limited to '')
| -rw-r--r-- | solenv/gbuild/Package.mk | 227 |
1 files changed, 227 insertions, 0 deletions
diff --git a/solenv/gbuild/Package.mk b/solenv/gbuild/Package.mk new file mode 100644 index 000000000..9c90322cf --- /dev/null +++ b/solenv/gbuild/Package.mk @@ -0,0 +1,227 @@ +# -*- Mode: makefile-gmake; tab-width: 4; indent-tabs-mode: t -*- +# +# This file is part of the LibreOffice project. +# +# This Source Code Form is subject to the terms of the Mozilla Public +# License, v. 2.0. If a copy of the MPL was not distributed with this +# file, You can obtain one at http://mozilla.org/MPL/2.0/. +# +# This file incorporates work covered by the following license notice: +# +# Licensed to the Apache Software Foundation (ASF) under one or more +# contributor license agreements. See the NOTICE file distributed +# with this work for additional information regarding copyright +# ownership. The ASF licenses this file to you under the Apache +# License, Version 2.0 (the "License"); you may not use this file +# except in compliance with the License. You may obtain a copy of +# the License at http://www.apache.org/licenses/LICENSE-2.0 . +# + + +# PackagePart class + +# a pattern rule with multiple targets is actually executed only once for each +# match, so define only pattern rules with one target here +# the .dir is for make 3.81, which ignores trailing / +define gb_PackagePart__rule +$(1)/.dir : + $$(if $$(wildcard $$(dir $$@)),,mkdir -p $$(dir $$@)) +$(1)/%/.dir : + $$(if $$(wildcard $$(dir $$@)),,mkdir -p $$(dir $$@)) +$(1)/% : + $$(call gb_Deliver_deliver,$$<,$$@) +endef + +$(foreach destination,$(call gb_PackagePart_get_destinations),$(eval \ + $(call gb_PackagePart__rule,$(destination)))) + +# Deliver one file to the output dir. +# +# gb_PackagePart_PackagePart destfile source prep-target outdir +define gb_PackagePart_PackagePart +$(4)/$(1) : $(2) | $(dir $(4)/$(1)).dir +$(2) :| $(3) + +$(if $(gb_Package_PRESTAGEDIR),\ + $(if $(wildcard $(gb_Package_PRESTAGEDIR)/$(1)),\ + $(call gb_Deliver_add_deliverable,$(4)/$(1),$(gb_Package_PRESTAGEDIR)/$(1),$(3)),\ + $(call gb_Deliver_add_deliverable,$(4)/$(1),$(2),$(3)) \ + ),\ + $(call gb_Deliver_add_deliverable,$(4)/$(1),$(2),$(3)) \ +) + +endef + + +# Package class + +$(dir $(call gb_Package_get_target,%)).dir : + $(if $(wildcard $(dir $@)),,mkdir -p $(dir $@)) + +$(dir $(call gb_Package_get_target,%))%/.dir : + $(if $(wildcard $(dir $@)),,mkdir -p $(dir $@)) + +.PHONY : $(call gb_Package_get_clean_target,%) +$(call gb_Package_get_clean_target,%) : + $(call gb_Output_announce,$*,$(false),PKG,2) + RESPONSEFILE=$(call gb_var2file,$(shell $(gb_MKTEMP)),500,$(FILES)) \ + && cat $${RESPONSEFILE} | $(if $(filter WNT,$(OS)),env -i PATH="$$PATH") xargs $(if $(filter MACOSX,$(OS_FOR_BUILD)),-n 1000) rm -fr \ + && rm -f $${RESPONSEFILE} + +$(call gb_Package_get_preparation_target,%) : + mkdir -p $(dir $@) && touch $@ + +# NOTE: It is possible that a file has been added to the package more +# than once, so we must drop the duplicates, or Windows installer will +# be unhappy. +# TODO: this is only for convenience for impl. of gbuild classes. There +# should be check that it does not happen in "normal" use, i.e., in +# Package_foo makefiles. +$(call gb_Package_get_target,%) : + $(call gb_Output_announce,$*,$(true),PKG,2) + $(call gb_Trace_StartRange,$*,PKG) + $(if $(PACKAGE_DEFINED),,$(call gb_Output_error,$(RDEPENDS) depend(s) on package $* which does not exist.)) + rm -f $@ && \ + mv $(call gb_var2file,$@.tmp,100,$(sort $(FILES))) $@ + $(call gb_Trace_EndRange,$*,PKG) + +# for other targets that want to create Packages, does not register at Module +define gb_Package_Package_internal +gb_Package_SOURCEDIR_$(1) := $(2) +gb_Package_OUTDIR_$(1) := $(INSTROOT) +$(call gb_Package_get_target,$(1)) : PACKAGE_DEFINED := $(true) +$(call gb_Package_get_target,$(1)) : FILES := +$(call gb_Package_get_clean_target,$(1)) : FILES := $(call gb_Package_get_target,$(1)) $(call gb_Package_get_preparation_target,$(1)) +$(call gb_Package_get_target,$(1)) : $(call gb_Package_get_preparation_target,$(1)) +$(call gb_Package_get_target,$(1)) : $(gb_Module_CURRENTMAKEFILE) +$(call gb_Package_get_target,$(1)) :| $(dir $(call gb_Package_get_target,$(1))).dir + +endef + +define gb_Package_Package +$$(if $$(gb_Package_SOURCEDIR_$(1)),$$(call gb_Output_error,gb_Package__check: Package $(1) has already been defined)) +$(if $(filter postprocess% instsetoo_native%,$(1)),,\ + $(call gb_Postprocess_register_target,AllPackages,Package,$(1))) +ifeq (,$$(filter $(1),$$(gb_Package_REGISTERED))) +$$(eval $$(call gb_Output_info,Currently known packages are: $(sort $(gb_Package_REGISTERED)),ALL)) +$$(eval $$(call gb_Output_error,Package $(1) must be registered in Repository.mk or RepositoryExternal.mk)) +endif +$(call gb_Package_Package_internal,$(1),$(2)) +$$(eval $$(call gb_Module_register_target,$(call gb_Package_get_target,$(1)),$(call gb_Package_get_clean_target,$(1)))) +$(call gb_Helper_make_userfriendly_targets,$(1),Package) + +endef + +# Ensure that the package is defined. +# +# gb_Package__check package +define gb_Package__check +$$(if $$(gb_Package_SOURCEDIR_$(1)),,$$(call gb_Output_error,gb_Package__check: Package $(1) has not been defined)) + +endef + +# Set output dir for the package files. +# +# Default is $(INSTROOT). +# +# gb_Package_set_outdir package outdir +define gb_Package_set_outdir +$(call gb_Package__check,$(1)) +gb_Package_OUTDIR_$(1) := $(2) + +endef + +# Add empty directory (if it's non-empty, don't use this, use +# gb_Package_add_file for the files in it instead!) +define gb_Package_add_empty_directory +$(call gb_Package__check,$(1)) +$(if $(strip $(2)),,$(call gb_Output_error,gb_Package_add_directory requires 2 arguments)) +$(call gb_Package_get_target,$(1)) :| $$(gb_Package_OUTDIR_$(1))/$(2)/.dir +$(call gb_Package_get_target,$(1)) : FILES += $$(gb_Package_OUTDIR_$(1))/$(2) +$(call gb_Package_get_clean_target,$(1)) : FILES += $$(gb_Package_OUTDIR_$(1))/$(2) + +endef + +# Example: +# $(eval $(call gb_Package_add_empty_directories,foo_inc,inc/foo)) +# # -> inc/foo +define gb_Package_add_empty_directories +$(call gb_Package__check,$(1)) +$(foreach file,$(2),$(call gb_Package_add_empty_directory,$(1),$(file))) + +endef + +define gb_Package_add_symbolic_link +$(call gb_Package__check,$(1)) +$(if $(strip $(3)),,$(call gb_Output_error,gb_Package_add_symbolic_link requires 3 arguments)) +$(call gb_Package_get_target,$(1)) : $$(gb_Package_OUTDIR_$(1))/$(2) +$$(gb_Package_OUTDIR_$(1))/$(2) :| $$(dir $$(gb_Package_OUTDIR_$(1))/$(2)).dir + rm -f $$@ && ln -s $(3) $$@ + +$(call gb_Package_get_target,$(1)) : FILES += $$(gb_Package_OUTDIR_$(1))/$(2) +$(call gb_Package_get_clean_target,$(1)) : FILES += $$(gb_Package_OUTDIR_$(1))/$(2) + +endef + +define gb_Package_add_file +$(call gb_Package__check,$(1)) +$(if $(strip $(3)),,$(call gb_Output_error,gb_Package_add_file requires 3 arguments)) +$(call gb_Package_get_target,$(1)) : $$(gb_Package_OUTDIR_$(1))/$(2) +$(call gb_Package_get_target,$(1)) : FILES += $$(gb_Package_OUTDIR_$(1))/$(2) +$(call gb_Package_get_clean_target,$(1)) : FILES += $$(gb_Package_OUTDIR_$(1))/$(2) +$(call gb_PackagePart_PackagePart,$(2),$$(gb_Package_SOURCEDIR_$(1))/$(3),$(call gb_Package_get_preparation_target,$(1)),$$(gb_Package_OUTDIR_$(1))) + +endef + +# Adds several files at once. +# +# Files are copied directly into the specified directory. +# +# Example: +# $(eval $(call gb_Package_Package,foo_inc,$(SRCDIR)/foo/inc)) +# $(eval $(call gb_Package_add_files,foo_inc,inc/foo,foo/bar/foo.hxx)) +# # -> inc/foo/foo.hxx +define gb_Package_add_files +$(call gb_Package__check,$(1)) +$(if $(strip $(3)),,$(if $(filter 1,$(words $(2))),,$(call gb_Output_error,gb_Package_add_files: it looks like either pkg name or dest. dir is missing))) +$(foreach file,$(3),$(call gb_Package_add_file,$(1),$(2)/$(notdir $(file)),$(file))) + +endef + +# Adds several files at once. +# +# Files are copied including subdirectories. +# +# Example: +# $(eval $(call gb_Package_Package,foo_inc,$(SRCDIR)/foo/inc)) +# $(eval $(call gb_Package_add_files,foo_inc,inc,foo/bar/foo.hxx)) +# # -> inc/foo/bar/foo.hxx +define gb_Package_add_files_with_dir +$(call gb_Package__check,$(1)) +$(if $(strip $(3)),,$(if $(filter 1,$(words $(2))),,$(call gb_Output_error,gb_Package_add_files: it looks like either pkg name or dest. dir is missing))) +$(foreach file,$(3),$(call gb_Package_add_file,$(1),$(2)/$(file),$(file))) + +endef + +# Package files from custom target +define gb_Package_use_custom_target +$(call gb_Package__check,$(1)) +$(call gb_Package_get_preparation_target,$(1)) :| $(call gb_CustomTarget_get_target,$(2)) + +endef + +# Package files from unpacked tarball of an external project +define gb_Package_use_unpacked +$(call gb_Package__check,$(1)) +$(call gb_Package_get_preparation_target,$(1)) :| $(call gb_UnpackedTarball_get_target,$(2)) + +endef + +# Package files from build of an external project +define gb_Package_use_external_project +$(call gb_Package__check,$(1)) +$(call gb_Package_get_preparation_target,$(1)) :| $(call gb_ExternalProject_get_target,$(2)) + +endef + +# vim: set noet sw=4: |