diff options
Diffstat (limited to 'svx/source/svdraw/svdedtv2.cxx')
| -rw-r--r-- | svx/source/svdraw/svdedtv2.cxx | 2250 |
1 files changed, 2250 insertions, 0 deletions
diff --git a/svx/source/svdraw/svdedtv2.cxx b/svx/source/svdraw/svdedtv2.cxx new file mode 100644 index 000000000..50a7940ca --- /dev/null +++ b/svx/source/svdraw/svdedtv2.cxx @@ -0,0 +1,2250 @@ +/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ +/* + * This file is part of the LibreOffice project. + * + * This Source Code Form is subject to the terms of the Mozilla Public + * License, v. 2.0. If a copy of the MPL was not distributed with this + * file, You can obtain one at http://mozilla.org/MPL/2.0/. + * + * This file incorporates work covered by the following license notice: + * + * Licensed to the Apache Software Foundation (ASF) under one or more + * contributor license agreements. See the NOTICE file distributed + * with this work for additional information regarding copyright + * ownership. The ASF licenses this file to you under the Apache + * License, Version 2.0 (the "License"); you may not use this file + * except in compliance with the License. You may obtain a copy of + * the License at http://www.apache.org/licenses/LICENSE-2.0 . + */ + +#include <svx/svdedtv.hxx> +#include <svx/svdundo.hxx> +#include <svx/svdogrp.hxx> +#include <svx/svdoutl.hxx> +#include <svx/svdopath.hxx> +#include <svx/svdpage.hxx> +#include <svx/svdpagv.hxx> +#include <svx/svditer.hxx> +#include <svx/svdograf.hxx> +#include <svx/svdoole2.hxx> +#include <svx/dialmgr.hxx> +#include <svx/sdooitm.hxx> +#include <svx/sdshitm.hxx> +#include <svx/xfillit0.hxx> +#include <svx/xlineit0.hxx> +#include <svx/xtextit0.hxx> +#include "svdfmtf.hxx" +#include <svdpdf.hxx> +#include <svx/svdetc.hxx> +#include <editeng/outlobj.hxx> +#include <editeng/eeitem.hxx> +#include <basegfx/polygon/b2dpolypolygon.hxx> +#include <basegfx/polygon/b2dpolypolygontools.hxx> +#include <svx/strings.hrc> +#include <svx/svdoashp.hxx> +#include <basegfx/polygon/b2dpolypolygoncutter.hxx> +#include <i18nutil/unicode.hxx> +#include <sal/log.hxx> +#include <tools/debug.hxx> +#include <memory> +#include <vector> +#include <vcl/graph.hxx> +#include <svx/svxids.hrc> +#include <dstribut_enum.hxx> +#include <osl/diagnose.h> + +using namespace com::sun::star; + +SdrObject* SdrEditView::GetMaxToTopObj(SdrObject* /*pObj*/) const +{ + return nullptr; +} + +SdrObject* SdrEditView::GetMaxToBtmObj(SdrObject* /*pObj*/) const +{ + return nullptr; +} + +void SdrEditView::ObjOrderChanged(SdrObject* /*pObj*/, size_t /*nOldPos*/, size_t /*nNewPos*/) +{ +} + +void SdrEditView::MovMarkedToTop() +{ + const size_t nCount=GetMarkedObjectCount(); + if (nCount==0) + return; + + const bool bUndo = IsUndoEnabled(); + + if( bUndo ) + BegUndo(SvxResId(STR_EditMovToTop),GetDescriptionOfMarkedObjects(),SdrRepeatFunc::MoveToTop); + + SortMarkedObjects(); + for (size_t nm=0; nm<nCount; ++nm) + { // All Ordnums have to be correct! + GetMarkedObjectByIndex(nm)->GetOrdNum(); + } + bool bChg=false; + SdrObjList* pOL0=nullptr; + size_t nNewPos=0; + for (size_t nm=nCount; nm>0;) + { + --nm; + SdrMark* pM=GetSdrMarkByIndex(nm); + SdrObject* pObj=pM->GetMarkedSdrObj(); + SdrObjList* pOL=pObj->getParentSdrObjListFromSdrObject(); + if (pOL!=pOL0) + { + nNewPos = pOL->GetObjCount()-1; + pOL0=pOL; + } + const size_t nNowPos = pObj->GetOrdNumDirect(); + const tools::Rectangle& rBR=pObj->GetCurrentBoundRect(); + size_t nCmpPos = nNowPos+1; + SdrObject* pMaxObj=GetMaxToTopObj(pObj); + if (pMaxObj!=nullptr) + { + size_t nMaxPos=pMaxObj->GetOrdNum(); + if (nMaxPos!=0) + nMaxPos--; + if (nNewPos>nMaxPos) + nNewPos=nMaxPos; // neither go faster... + if (nNewPos<nNowPos) + nNewPos=nNowPos; // nor go in the other direction + } + bool bEnd=false; + while (nCmpPos<nNewPos && !bEnd) + { + SdrObject* pCmpObj=pOL->GetObj(nCmpPos); + if (pCmpObj==nullptr) + { + OSL_FAIL("MovMarkedToTop(): Reference object not found."); + bEnd=true; + } + else if (pCmpObj==pMaxObj) + { + nNewPos=nCmpPos; + nNewPos--; + bEnd=true; + } + else if (rBR.Overlaps(pCmpObj->GetCurrentBoundRect())) + { + nNewPos=nCmpPos; + bEnd=true; + } + else + { + nCmpPos++; + } + } + if (nNowPos!=nNewPos) + { + bChg=true; + pOL->SetObjectOrdNum(nNowPos,nNewPos); + if( bUndo ) + AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoObjectOrdNum(*pObj,nNowPos,nNewPos)); + ObjOrderChanged(pObj,nNowPos,nNewPos); + } + nNewPos--; + } + + if( bUndo ) + EndUndo(); + + if (bChg) + MarkListHasChanged(); +} + +void SdrEditView::MovMarkedToBtm() +{ + const size_t nCount=GetMarkedObjectCount(); + if (nCount==0) + return; + + const bool bUndo = IsUndoEnabled(); + + if( bUndo ) + BegUndo(SvxResId(STR_EditMovToBtm),GetDescriptionOfMarkedObjects(),SdrRepeatFunc::MoveToBottom); + + SortMarkedObjects(); + for (size_t nm=0; nm<nCount; ++nm) + { // All Ordnums have to be correct! + GetMarkedObjectByIndex(nm)->GetOrdNum(); + } + + bool bChg=false; + SdrObjList* pOL0=nullptr; + size_t nNewPos=0; + for (size_t nm=0; nm<nCount; ++nm) + { + SdrMark* pM=GetSdrMarkByIndex(nm); + SdrObject* pObj=pM->GetMarkedSdrObj(); + SdrObjList* pOL=pObj->getParentSdrObjListFromSdrObject(); + if (pOL!=pOL0) + { + nNewPos=0; + pOL0=pOL; + } + const size_t nNowPos = pObj->GetOrdNumDirect(); + const tools::Rectangle& rBR=pObj->GetCurrentBoundRect(); + size_t nCmpPos = nNowPos; + if (nCmpPos>0) + --nCmpPos; + SdrObject* pMaxObj=GetMaxToBtmObj(pObj); + if (pMaxObj!=nullptr) + { + const size_t nMinPos=pMaxObj->GetOrdNum()+1; + if (nNewPos<nMinPos) + nNewPos=nMinPos; // neither go faster... + if (nNewPos>nNowPos) + nNewPos=nNowPos; // nor go in the other direction + } + bool bEnd=false; + // nNewPos in this case is the "maximum" position + // the object may reach without going faster than the object before + // it (multiple selection). + while (nCmpPos>nNewPos && !bEnd) + { + SdrObject* pCmpObj=pOL->GetObj(nCmpPos); + if (pCmpObj==nullptr) + { + OSL_FAIL("MovMarkedToBtm(): Reference object not found."); + bEnd=true; + } + else if (pCmpObj==pMaxObj) + { + nNewPos=nCmpPos; + nNewPos++; + bEnd=true; + } + else if (rBR.Overlaps(pCmpObj->GetCurrentBoundRect())) + { + nNewPos=nCmpPos; + bEnd=true; + } + else + { + nCmpPos--; + } + } + if (nNowPos!=nNewPos) + { + bChg=true; + pOL->SetObjectOrdNum(nNowPos,nNewPos); + if( bUndo ) + AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoObjectOrdNum(*pObj,nNowPos,nNewPos)); + ObjOrderChanged(pObj,nNowPos,nNewPos); + } + nNewPos++; + } + + if(bUndo) + EndUndo(); + + if(bChg) + MarkListHasChanged(); +} + +void SdrEditView::PutMarkedToTop() +{ + PutMarkedInFrontOfObj(nullptr); +} + +void SdrEditView::PutMarkedInFrontOfObj(const SdrObject* pRefObj) +{ + const size_t nCount=GetMarkedObjectCount(); + if (nCount==0) + return; + + const bool bUndo = IsUndoEnabled(); + if( bUndo ) + BegUndo(SvxResId(STR_EditPutToTop),GetDescriptionOfMarkedObjects(),SdrRepeatFunc::PutToTop); + + SortMarkedObjects(); + + if (pRefObj!=nullptr) + { + // Make "in front of the object" work, even if the + // selected objects are already in front of the other object + const size_t nRefMark=TryToFindMarkedObject(pRefObj); + SdrMark aRefMark; + if (nRefMark!=SAL_MAX_SIZE) + { + aRefMark=*GetSdrMarkByIndex(nRefMark); + GetMarkedObjectListWriteAccess().DeleteMark(nRefMark); + } + PutMarkedToBtm(); + if (nRefMark!=SAL_MAX_SIZE) + { + GetMarkedObjectListWriteAccess().InsertEntry(aRefMark); + SortMarkedObjects(); + } + } + for (size_t nm=0; nm<nCount; ++nm) + { // All Ordnums have to be correct! + GetMarkedObjectByIndex(nm)->GetOrdNum(); + } + bool bChg=false; + SdrObjList* pOL0=nullptr; + size_t nNewPos=0; + for (size_t nm=nCount; nm>0;) + { + --nm; + SdrMark* pM=GetSdrMarkByIndex(nm); + SdrObject* pObj=pM->GetMarkedSdrObj(); + if (pObj!=pRefObj) + { + SdrObjList* pOL=pObj->getParentSdrObjListFromSdrObject(); + if (pOL!=pOL0) + { + nNewPos=pOL->GetObjCount()-1; + pOL0=pOL; + } + const size_t nNowPos=pObj->GetOrdNumDirect(); + SdrObject* pMaxObj=GetMaxToTopObj(pObj); + if (pMaxObj!=nullptr) + { + size_t nMaxOrd=pMaxObj->GetOrdNum(); // sadly doesn't work any other way + if (nMaxOrd>0) + nMaxOrd--; + if (nNewPos>nMaxOrd) + nNewPos=nMaxOrd; // neither go faster... + if (nNewPos<nNowPos) + nNewPos=nNowPos; // nor go into the other direction + } + if (pRefObj!=nullptr) + { + if (pRefObj->getParentSdrObjListFromSdrObject()==pObj->getParentSdrObjListFromSdrObject()) + { + const size_t nMaxOrd=pRefObj->GetOrdNum(); // sadly doesn't work any other way + if (nNewPos>nMaxOrd) + nNewPos=nMaxOrd; // neither go faster... + if (nNewPos<nNowPos) + nNewPos=nNowPos; // nor go into the other direction + } + else + { + nNewPos=nNowPos; // different PageView, so don't change + } + } + if (nNowPos!=nNewPos) + { + bChg=true; + pOL->SetObjectOrdNum(nNowPos,nNewPos); + if( bUndo ) + AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoObjectOrdNum(*pObj,nNowPos,nNewPos)); + ObjOrderChanged(pObj,nNowPos,nNewPos); + } + nNewPos--; + } // if (pObj!=pRefObj) + } // for loop over all selected objects + + if( bUndo ) + EndUndo(); + + if(bChg) + MarkListHasChanged(); +} + +void SdrEditView::PutMarkedToBtm() +{ + PutMarkedBehindObj(nullptr); +} + +void SdrEditView::PutMarkedBehindObj(const SdrObject* pRefObj) +{ + const size_t nCount=GetMarkedObjectCount(); + if (nCount==0) + return; + + const bool bUndo = IsUndoEnabled(); + + if( bUndo ) + BegUndo(SvxResId(STR_EditPutToBtm),GetDescriptionOfMarkedObjects(),SdrRepeatFunc::PutToBottom); + + SortMarkedObjects(); + if (pRefObj!=nullptr) + { + // Make "behind the object" work, even if the + // selected objects are already behind the other object + const size_t nRefMark=TryToFindMarkedObject(pRefObj); + SdrMark aRefMark; + if (nRefMark!=SAL_MAX_SIZE) + { + aRefMark=*GetSdrMarkByIndex(nRefMark); + GetMarkedObjectListWriteAccess().DeleteMark(nRefMark); + } + PutMarkedToTop(); + if (nRefMark!=SAL_MAX_SIZE) + { + GetMarkedObjectListWriteAccess().InsertEntry(aRefMark); + SortMarkedObjects(); + } + } + for (size_t nm=0; nm<nCount; ++nm) { // All Ordnums have to be correct! + GetMarkedObjectByIndex(nm)->GetOrdNum(); + } + bool bChg=false; + SdrObjList* pOL0=nullptr; + size_t nNewPos=0; + for (size_t nm=0; nm<nCount; ++nm) { + SdrMark* pM=GetSdrMarkByIndex(nm); + SdrObject* pObj=pM->GetMarkedSdrObj(); + if (pObj!=pRefObj) { + SdrObjList* pOL=pObj->getParentSdrObjListFromSdrObject(); + if (pOL!=pOL0) { + nNewPos=0; + pOL0=pOL; + } + const size_t nNowPos=pObj->GetOrdNumDirect(); + SdrObject* pMinObj=GetMaxToBtmObj(pObj); + if (pMinObj!=nullptr) { + const size_t nMinOrd=pMinObj->GetOrdNum()+1; // sadly doesn't work any differently + if (nNewPos<nMinOrd) nNewPos=nMinOrd; // neither go faster... + if (nNewPos>nNowPos) nNewPos=nNowPos; // nor go into the other direction + } + if (pRefObj!=nullptr) { + if (pRefObj->getParentSdrObjListFromSdrObject()==pObj->getParentSdrObjListFromSdrObject()) { + const size_t nMinOrd=pRefObj->GetOrdNum(); // sadly doesn't work any differently + if (nNewPos<nMinOrd) nNewPos=nMinOrd; // neither go faster... + if (nNewPos>nNowPos) nNewPos=nNowPos; // nor go into the other direction + } else { + nNewPos=nNowPos; // different PageView, so don't change + } + } + if (nNowPos!=nNewPos) { + bChg=true; + pOL->SetObjectOrdNum(nNowPos,nNewPos); + if( bUndo ) + AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoObjectOrdNum(*pObj,nNowPos,nNewPos)); + ObjOrderChanged(pObj,nNowPos,nNewPos); + } + nNewPos++; + } // if (pObj!=pRefObj) + } // for loop over all selected objects + + if(bUndo) + EndUndo(); + + if(bChg) + MarkListHasChanged(); + +} + +void SdrEditView::ReverseOrderOfMarked() +{ + SortMarkedObjects(); + const size_t nMarkCount=GetMarkedObjectCount(); + if (nMarkCount<=0) + return; + + bool bChg=false; + + bool bUndo = IsUndoEnabled(); + if( bUndo ) + BegUndo(SvxResId(STR_EditRevOrder),GetDescriptionOfMarkedObjects(),SdrRepeatFunc::ReverseOrder); + + size_t a=0; + do { + // take into account selection across multiple PageViews + size_t b=a+1; + while (b<nMarkCount && GetSdrPageViewOfMarkedByIndex(b) == GetSdrPageViewOfMarkedByIndex(a)) ++b; + --b; + SdrObjList* pOL=GetSdrPageViewOfMarkedByIndex(a)->GetObjList(); + size_t c=b; + if (a<c) { // make sure OrdNums aren't dirty + GetMarkedObjectByIndex(a)->GetOrdNum(); + } + while (a<c) { + SdrObject* pObj1=GetMarkedObjectByIndex(a); + SdrObject* pObj2=GetMarkedObjectByIndex(c); + const size_t nOrd1=pObj1->GetOrdNumDirect(); + const size_t nOrd2=pObj2->GetOrdNumDirect(); + if( bUndo ) + { + AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoObjectOrdNum(*pObj1,nOrd1,nOrd2)); + AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoObjectOrdNum(*pObj2,nOrd2-1,nOrd1)); + } + pOL->SetObjectOrdNum(nOrd1,nOrd2); + // Obj 2 has moved forward by one position, so now nOrd2-1 + pOL->SetObjectOrdNum(nOrd2-1,nOrd1); + // use Replace instead of SetOrdNum for performance reasons (recalculation of Ordnums) + ++a; + --c; + bChg=true; + } + a=b+1; + } while (a<nMarkCount); + + if(bUndo) + EndUndo(); + + if(bChg) + MarkListHasChanged(); +} + +void SdrEditView::ImpCheckToTopBtmPossible() +{ + const size_t nCount=GetMarkedObjectCount(); + if (nCount==0) + return; + if (nCount==1) + { // special-casing for single selection + SdrObject* pObj=GetMarkedObjectByIndex(0); + SdrObjList* pOL=pObj->getParentSdrObjListFromSdrObject(); + SAL_WARN_IF(!pOL, "svx", "Object somehow has no ObjList"); + size_t nMax = pOL ? pOL->GetObjCount() : 0; + size_t nMin = 0; + const size_t nObjNum=pObj->GetOrdNum(); + SdrObject* pRestrict=GetMaxToTopObj(pObj); + if (pRestrict!=nullptr) { + const size_t nRestrict=pRestrict->GetOrdNum(); + if (nRestrict<nMax) nMax=nRestrict; + } + pRestrict=GetMaxToBtmObj(pObj); + if (pRestrict!=nullptr) { + const size_t nRestrict=pRestrict->GetOrdNum(); + if (nRestrict>nMin) nMin=nRestrict; + } + m_bToTopPossible=nObjNum<nMax-1; + m_bToBtmPossible=nObjNum>nMin; + } else { // multiple selection + SdrObjList* pOL0=nullptr; + size_t nPos0 = 0; + for (size_t nm = 0; !m_bToBtmPossible && nm<nCount; ++nm) { // check 'send to background' + SdrObject* pObj=GetMarkedObjectByIndex(nm); + SdrObjList* pOL=pObj->getParentSdrObjListFromSdrObject(); + if (pOL!=pOL0) { + nPos0 = 0; + pOL0=pOL; + } + const size_t nPos = pObj->GetOrdNum(); + m_bToBtmPossible = nPos && (nPos-1 > nPos0); + nPos0 = nPos; + } + + pOL0=nullptr; + nPos0 = SAL_MAX_SIZE; + for (size_t nm=nCount; !m_bToTopPossible && nm>0; ) { // check 'bring to front' + --nm; + SdrObject* pObj=GetMarkedObjectByIndex(nm); + SdrObjList* pOL=pObj->getParentSdrObjListFromSdrObject(); + if (pOL!=pOL0) { + nPos0=pOL->GetObjCount(); + pOL0=pOL; + } + const size_t nPos = pObj->GetOrdNum(); + m_bToTopPossible = nPos+1 < nPos0; + nPos0=nPos; + } + } +} + + +// Combine + + +void SdrEditView::ImpCopyAttributes(const SdrObject* pSource, SdrObject* pDest) const +{ + if (pSource!=nullptr) { + SdrObjList* pOL=pSource->GetSubList(); + if (pOL!=nullptr && !pSource->Is3DObj()) { // get first non-group object from group + SdrObjListIter aIter(pOL,SdrIterMode::DeepNoGroups); + pSource=aIter.Next(); + } + } + + if(!(pSource && pDest)) + return; + + SfxItemSetFixed<SDRATTR_START, SDRATTR_NOTPERSIST_FIRST-1, + SDRATTR_NOTPERSIST_LAST+1, SDRATTR_END, + EE_ITEMS_START, EE_ITEMS_END> aSet(mpModel->GetItemPool()); + + aSet.Put(pSource->GetMergedItemSet()); + + pDest->ClearMergedItem(); + pDest->SetMergedItemSet(aSet); + + pDest->NbcSetLayer(pSource->GetLayer()); + pDest->NbcSetStyleSheet(pSource->GetStyleSheet(), true); +} + +bool SdrEditView::ImpCanConvertForCombine1(const SdrObject* pObj) +{ + // new condition IsLine() to be able to combine simple Lines + bool bIsLine(false); + + const SdrPathObj* pPath = dynamic_cast< const SdrPathObj*>( pObj ); + + if(pPath) + { + bIsLine = pPath->IsLine(); + } + + SdrObjTransformInfoRec aInfo; + pObj->TakeObjInfo(aInfo); + + return (aInfo.bCanConvToPath || aInfo.bCanConvToPoly || bIsLine); +} + +bool SdrEditView::ImpCanConvertForCombine(const SdrObject* pObj) +{ + SdrObjList* pOL = pObj->GetSubList(); + + if(pOL && !pObj->Is3DObj()) + { + SdrObjListIter aIter(pOL, SdrIterMode::DeepNoGroups); + + while(aIter.IsMore()) + { + SdrObject* pObj1 = aIter.Next(); + + // all members of a group have to be convertible + if(!ImpCanConvertForCombine1(pObj1)) + { + return false; + } + } + } + else + { + if(!ImpCanConvertForCombine1(pObj)) + { + return false; + } + } + + return true; +} + +basegfx::B2DPolyPolygon SdrEditView::ImpGetPolyPolygon1(const SdrObject* pObj) +{ + basegfx::B2DPolyPolygon aRetval; + const SdrPathObj* pPath = dynamic_cast<const SdrPathObj*>( pObj ); + + if(pPath && !pObj->GetOutlinerParaObject()) + { + aRetval = pPath->GetPathPoly(); + } + else + { + SdrObjectUniquePtr pConvObj = pObj->ConvertToPolyObj(true/*bCombine*/, false); + + if(pConvObj) + { + SdrObjList* pOL = pConvObj->GetSubList(); + + if(pOL) + { + SdrObjListIter aIter(pOL, SdrIterMode::DeepNoGroups); + + while(aIter.IsMore()) + { + SdrObject* pObj1 = aIter.Next(); + pPath = dynamic_cast<SdrPathObj*>( pObj1 ); + + if(pPath) + { + aRetval.append(pPath->GetPathPoly()); + } + } + } + else + { + pPath = dynamic_cast<SdrPathObj*>( pConvObj.get() ); + + if(pPath) + { + aRetval = pPath->GetPathPoly(); + } + } + } + } + + return aRetval; +} + +basegfx::B2DPolyPolygon SdrEditView::ImpGetPolyPolygon(const SdrObject* pObj) +{ + SdrObjList* pOL = pObj->GetSubList(); + + if(pOL && !pObj->Is3DObj()) + { + basegfx::B2DPolyPolygon aRetval; + SdrObjListIter aIter(pOL, SdrIterMode::DeepNoGroups); + + while(aIter.IsMore()) + { + SdrObject* pObj1 = aIter.Next(); + aRetval.append(ImpGetPolyPolygon1(pObj1)); + } + + return aRetval; + } + else + { + return ImpGetPolyPolygon1(pObj); + } +} + +basegfx::B2DPolygon SdrEditView::ImpCombineToSinglePolygon(const basegfx::B2DPolyPolygon& rPolyPolygon) +{ + const sal_uInt32 nPolyCount(rPolyPolygon.count()); + + if(0 == nPolyCount) + { + return basegfx::B2DPolygon(); + } + else if(1 == nPolyCount) + { + return rPolyPolygon.getB2DPolygon(0); + } + else + { + basegfx::B2DPolygon aRetval(rPolyPolygon.getB2DPolygon(0)); + + for(sal_uInt32 a(1); a < nPolyCount; a++) + { + basegfx::B2DPolygon aCandidate(rPolyPolygon.getB2DPolygon(a)); + + if(aRetval.count()) + { + if(aCandidate.count()) + { + const basegfx::B2DPoint aCA(aCandidate.getB2DPoint(0)); + const basegfx::B2DPoint aCB(aCandidate.getB2DPoint(aCandidate.count() - 1)); + const basegfx::B2DPoint aRA(aRetval.getB2DPoint(0)); + const basegfx::B2DPoint aRB(aRetval.getB2DPoint(aRetval.count() - 1)); + + const double fRACA(basegfx::B2DVector(aCA - aRA).getLength()); + const double fRACB(basegfx::B2DVector(aCB - aRA).getLength()); + const double fRBCA(basegfx::B2DVector(aCA - aRB).getLength()); + const double fRBCB(basegfx::B2DVector(aCB - aRB).getLength()); + + const double fSmallestRA(std::min(fRACA, fRACB)); + const double fSmallestRB(std::min(fRBCA, fRBCB)); + + if(fSmallestRA < fSmallestRB) + { + // flip result + aRetval.flip(); + } + + const double fSmallestCA(std::min(fRACA, fRBCA)); + const double fSmallestCB(std::min(fRACB, fRBCB)); + + if(fSmallestCB < fSmallestCA) + { + // flip candidate + aCandidate.flip(); + } + + // append candidate to retval + aRetval.append(aCandidate); + } + } + else + { + aRetval = aCandidate; + } + } + + return aRetval; + } +} + +namespace { + +// for distribution dialog function +struct ImpDistributeEntry +{ + SdrObject* mpObj; + sal_Int32 mnPos; + sal_Int32 mnLength; +}; + +} + +typedef std::vector<ImpDistributeEntry> ImpDistributeEntryList; + +void SdrEditView::DistributeMarkedObjects(sal_uInt16 SlotID) +{ + const size_t nMark(GetMarkedObjectCount()); + + if(nMark <= 2) + return; + + SvxDistributeHorizontal eHor = SvxDistributeHorizontal::NONE; + SvxDistributeVertical eVer = SvxDistributeVertical::NONE; + + switch (SlotID) + { + case SID_DISTRIBUTE_HLEFT: eHor = SvxDistributeHorizontal::Left; break; + case SID_DISTRIBUTE_HCENTER: eHor = SvxDistributeHorizontal::Center; break; + case SID_DISTRIBUTE_HDISTANCE: eHor = SvxDistributeHorizontal::Distance; break; + case SID_DISTRIBUTE_HRIGHT: eHor = SvxDistributeHorizontal::Right; break; + case SID_DISTRIBUTE_VTOP: eVer = SvxDistributeVertical::Top; break; + case SID_DISTRIBUTE_VCENTER: eVer = SvxDistributeVertical::Center; break; + case SID_DISTRIBUTE_VDISTANCE: eVer = SvxDistributeVertical::Distance; break; + case SID_DISTRIBUTE_VBOTTOM: eVer = SvxDistributeVertical::Bottom; break; + } + + ImpDistributeEntryList aEntryList; + ImpDistributeEntryList::iterator itEntryList; + sal_uInt32 nFullLength; + + const bool bUndo = IsUndoEnabled(); + if( bUndo ) + BegUndo(); + + if(eHor != SvxDistributeHorizontal::NONE) + { + // build sorted entry list + nFullLength = 0; + + for( size_t a = 0; a < nMark; ++a ) + { + SdrMark* pMark = GetSdrMarkByIndex(a); + ImpDistributeEntry aNew; + + aNew.mpObj = pMark->GetMarkedSdrObj(); + + switch(eHor) + { + case SvxDistributeHorizontal::Left: + { + aNew.mnPos = aNew.mpObj->GetSnapRect().Left(); + break; + } + case SvxDistributeHorizontal::Center: + { + aNew.mnPos = (aNew.mpObj->GetSnapRect().Right() + aNew.mpObj->GetSnapRect().Left()) / 2; + break; + } + case SvxDistributeHorizontal::Distance: + { + aNew.mnLength = aNew.mpObj->GetSnapRect().GetWidth() + 1; + nFullLength += aNew.mnLength; + aNew.mnPos = (aNew.mpObj->GetSnapRect().Right() + aNew.mpObj->GetSnapRect().Left()) / 2; + break; + } + case SvxDistributeHorizontal::Right: + { + aNew.mnPos = aNew.mpObj->GetSnapRect().Right(); + break; + } + default: break; + } + + itEntryList = std::find_if(aEntryList.begin(), aEntryList.end(), + [&aNew](const ImpDistributeEntry& rEntry) { return rEntry.mnPos >= aNew.mnPos; }); + if ( itEntryList < aEntryList.end() ) + aEntryList.insert( itEntryList, aNew ); + else + aEntryList.push_back( aNew ); + } + + if(eHor == SvxDistributeHorizontal::Distance) + { + // calculate room in-between + sal_Int32 nWidth = GetAllMarkedBoundRect().GetWidth() + 1; + double fStepWidth = (static_cast<double>(nWidth) - static_cast<double>(nFullLength)) / static_cast<double>(aEntryList.size() - 1); + double fStepStart = static_cast<double>(aEntryList[ 0 ].mnPos); + fStepStart += fStepWidth + static_cast<double>((aEntryList[ 0 ].mnLength + aEntryList[ 1 ].mnLength) / 2); + + // move entries 1..n-1 + for( size_t i = 1, n = aEntryList.size()-1; i < n; ++i ) + { + ImpDistributeEntry& rCurr = aEntryList[ i ]; + ImpDistributeEntry& rNext = aEntryList[ i + 1]; + sal_Int32 nDelta = static_cast<sal_Int32>(fStepStart + 0.5) - rCurr.mnPos; + if( bUndo ) + AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoGeoObject(*rCurr.mpObj)); + rCurr.mpObj->Move(Size(nDelta, 0)); + fStepStart += fStepWidth + static_cast<double>((rCurr.mnLength + rNext.mnLength) / 2); + } + } + else + { + // calculate distances + sal_Int32 nWidth = aEntryList[ aEntryList.size() - 1 ].mnPos - aEntryList[ 0 ].mnPos; + double fStepWidth = static_cast<double>(nWidth) / static_cast<double>(aEntryList.size() - 1); + double fStepStart = static_cast<double>(aEntryList[ 0 ].mnPos); + fStepStart += fStepWidth; + + // move entries 1..n-1 + for( size_t i = 1 ; i < aEntryList.size()-1 ; ++i ) + { + ImpDistributeEntry& rCurr = aEntryList[ i ]; + sal_Int32 nDelta = static_cast<sal_Int32>(fStepStart + 0.5) - rCurr.mnPos; + if( bUndo ) + AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoGeoObject(*rCurr.mpObj)); + rCurr.mpObj->Move(Size(nDelta, 0)); + fStepStart += fStepWidth; + } + } + + // clear list + aEntryList.clear(); + } + + if(eVer != SvxDistributeVertical::NONE) + { + // build sorted entry list + nFullLength = 0; + + for( size_t a = 0; a < nMark; ++a ) + { + SdrMark* pMark = GetSdrMarkByIndex(a); + ImpDistributeEntry aNew; + + aNew.mpObj = pMark->GetMarkedSdrObj(); + + switch(eVer) + { + case SvxDistributeVertical::Top: + { + aNew.mnPos = aNew.mpObj->GetSnapRect().Top(); + break; + } + case SvxDistributeVertical::Center: + { + aNew.mnPos = (aNew.mpObj->GetSnapRect().Bottom() + aNew.mpObj->GetSnapRect().Top()) / 2; + break; + } + case SvxDistributeVertical::Distance: + { + aNew.mnLength = aNew.mpObj->GetSnapRect().GetHeight() + 1; + nFullLength += aNew.mnLength; + aNew.mnPos = (aNew.mpObj->GetSnapRect().Bottom() + aNew.mpObj->GetSnapRect().Top()) / 2; + break; + } + case SvxDistributeVertical::Bottom: + { + aNew.mnPos = aNew.mpObj->GetSnapRect().Bottom(); + break; + } + default: break; + } + + itEntryList = std::find_if(aEntryList.begin(), aEntryList.end(), + [&aNew](const ImpDistributeEntry& rEntry) { return rEntry.mnPos >= aNew.mnPos; }); + if ( itEntryList < aEntryList.end() ) + aEntryList.insert( itEntryList, aNew ); + else + aEntryList.push_back( aNew ); + } + + if(eVer == SvxDistributeVertical::Distance) + { + // calculate room in-between + sal_Int32 nHeight = GetAllMarkedBoundRect().GetHeight() + 1; + double fStepWidth = (static_cast<double>(nHeight) - static_cast<double>(nFullLength)) / static_cast<double>(aEntryList.size() - 1); + double fStepStart = static_cast<double>(aEntryList[ 0 ].mnPos); + fStepStart += fStepWidth + static_cast<double>((aEntryList[ 0 ].mnLength + aEntryList[ 1 ].mnLength) / 2); + + // move entries 1..n-1 + for( size_t i = 1, n = aEntryList.size()-1; i < n; ++i) + { + ImpDistributeEntry& rCurr = aEntryList[ i ]; + ImpDistributeEntry& rNext = aEntryList[ i + 1 ]; + sal_Int32 nDelta = static_cast<sal_Int32>(fStepStart + 0.5) - rCurr.mnPos; + if( bUndo ) + AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoGeoObject(*rCurr.mpObj)); + rCurr.mpObj->Move(Size(0, nDelta)); + fStepStart += fStepWidth + static_cast<double>((rCurr.mnLength + rNext.mnLength) / 2); + } + } + else + { + // calculate distances + sal_Int32 nHeight = aEntryList[ aEntryList.size() - 1 ].mnPos - aEntryList[ 0 ].mnPos; + double fStepWidth = static_cast<double>(nHeight) / static_cast<double>(aEntryList.size() - 1); + double fStepStart = static_cast<double>(aEntryList[ 0 ].mnPos); + fStepStart += fStepWidth; + + // move entries 1..n-1 + for(size_t i = 1, n = aEntryList.size()-1; i < n; ++i) + { + ImpDistributeEntry& rCurr = aEntryList[ i ]; + sal_Int32 nDelta = static_cast<sal_Int32>(fStepStart + 0.5) - rCurr.mnPos; + if( bUndo ) + AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoGeoObject(*rCurr.mpObj)); + rCurr.mpObj->Move(Size(0, nDelta)); + fStepStart += fStepWidth; + } + } + + // clear list + aEntryList.clear(); + } + + // UNDO-Comment and end of UNDO + mpModel->SetUndoComment(SvxResId(STR_DistributeMarkedObjects)); + + if( bUndo ) + EndUndo(); +} + +void SdrEditView::MergeMarkedObjects(SdrMergeMode eMode) +{ + // #i73441# check content + if(!AreObjectsMarked()) + return; + + SdrMarkList aRemove; + SortMarkedObjects(); + + const bool bUndo = IsUndoEnabled(); + + if( bUndo ) + BegUndo(); + + size_t nInsPos = SAL_MAX_SIZE; + const SdrObject* pAttrObj = nullptr; + basegfx::B2DPolyPolygon aMergePolyPolygonA; + basegfx::B2DPolyPolygon aMergePolyPolygonB; + + SdrObjList* pInsOL = nullptr; + SdrPageView* pInsPV = nullptr; + bool bFirstObjectComplete(false); + + // make sure selected objects are contour objects + // since now basegfx::utils::adaptiveSubdivide() is used, it is no longer + // necessary to use ConvertMarkedToPolyObj which will subdivide curves using the old + // mechanisms. In a next step the polygon clipper will even be able to clip curves... + // ConvertMarkedToPolyObj(true); + ConvertMarkedToPathObj(true); + OSL_ENSURE(AreObjectsMarked(), "no more objects selected after preparations (!)"); + + for(size_t a=0; a<GetMarkedObjectCount(); ++a) + { + SdrMark* pM = GetSdrMarkByIndex(a); + SdrObject* pObj = pM->GetMarkedSdrObj(); + + if(ImpCanConvertForCombine(pObj)) + { + if(!pAttrObj) + pAttrObj = pObj; + + nInsPos = pObj->GetOrdNum() + 1; + pInsPV = pM->GetPageView(); + pInsOL = pObj->getParentSdrObjListFromSdrObject(); + + // #i76891# use single iteration from SJ here which works on SdrObjects and takes + // groups into account by itself + SdrObjListIter aIter(*pObj, SdrIterMode::DeepWithGroups); + + while(aIter.IsMore()) + { + SdrObject* pCandidate = aIter.Next(); + SdrPathObj* pPathObj = dynamic_cast<SdrPathObj*>( pCandidate ); + if(pPathObj) + { + basegfx::B2DPolyPolygon aTmpPoly(pPathObj->GetPathPoly()); + + // #i76891# unfortunately ConvertMarkedToPathObj has converted all + // involved polygon data to curve segments, even if not necessary. + // It is better to try to reduce to more simple polygons. + aTmpPoly = basegfx::utils::simplifyCurveSegments(aTmpPoly); + + // for each part polygon as preparation, remove self-intersections + // correct orientations and get rid of possible neutral polygons. + aTmpPoly = basegfx::utils::prepareForPolygonOperation(aTmpPoly); + + if(!bFirstObjectComplete) + { + // #i111987# Also need to collect ORed source shape when more than + // a single polygon is involved + if(aMergePolyPolygonA.count()) + { + aMergePolyPolygonA = basegfx::utils::solvePolygonOperationOr(aMergePolyPolygonA, aTmpPoly); + } + else + { + aMergePolyPolygonA = aTmpPoly; + } + } + else + { + if(aMergePolyPolygonB.count()) + { + // to topologically correctly collect the 2nd polygon + // group it is necessary to OR the parts (each is seen as + // XOR-FillRule polygon and they are drawn over each-other) + aMergePolyPolygonB = basegfx::utils::solvePolygonOperationOr(aMergePolyPolygonB, aTmpPoly); + } + else + { + aMergePolyPolygonB = aTmpPoly; + } + } + } + } + + // was there something added to the first polygon? + if(!bFirstObjectComplete && aMergePolyPolygonA.count()) + { + bFirstObjectComplete = true; + } + + // move object to temporary delete list + aRemove.InsertEntry(SdrMark(pObj, pM->GetPageView())); + } + } + + switch(eMode) + { + case SdrMergeMode::Merge: + { + // merge all contained parts (OR) + aMergePolyPolygonA = basegfx::utils::solvePolygonOperationOr(aMergePolyPolygonA, aMergePolyPolygonB); + break; + } + case SdrMergeMode::Subtract: + { + // Subtract B from A + aMergePolyPolygonA = basegfx::utils::solvePolygonOperationDiff(aMergePolyPolygonA, aMergePolyPolygonB); + break; + } + case SdrMergeMode::Intersect: + { + // AND B and A + aMergePolyPolygonA = basegfx::utils::solvePolygonOperationAnd(aMergePolyPolygonA, aMergePolyPolygonB); + break; + } + } + + // #i73441# check insert list before taking actions + if(pInsOL) + { + SdrPathObj* pPath = new SdrPathObj(pAttrObj->getSdrModelFromSdrObject(), SdrObjKind::PathFill, aMergePolyPolygonA); + ImpCopyAttributes(pAttrObj, pPath); + pInsOL->InsertObject(pPath, nInsPos); + if( bUndo ) + AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoNewObject(*pPath)); + + // #i124760# To have a correct selection with only the new object it is necessary to + // unmark all objects first. If not doing so, there may remain invalid pointers to objects + // TTTT:Not needed for aw080 (!) + UnmarkAllObj(pInsPV); + + MarkObj(pPath, pInsPV, false, true); + } + + aRemove.ForceSort(); + switch(eMode) + { + case SdrMergeMode::Merge: + { + SetUndoComment( + SvxResId(STR_EditMergeMergePoly), + aRemove.GetMarkDescription()); + break; + } + case SdrMergeMode::Subtract: + { + SetUndoComment( + SvxResId(STR_EditMergeSubstractPoly), + aRemove.GetMarkDescription()); + break; + } + case SdrMergeMode::Intersect: + { + SetUndoComment( + SvxResId(STR_EditMergeIntersectPoly), + aRemove.GetMarkDescription()); + break; + } + } + DeleteMarkedList(aRemove); + + if( bUndo ) + EndUndo(); +} + +void SdrEditView::EqualizeMarkedObjects(bool bWidth) +{ + const SdrMarkList& rMarkList = GetMarkedObjectList(); + size_t nMarked = rMarkList.GetMarkCount(); + + if (nMarked < 2) + return; + + size_t nLastSelected = 0; + sal_Int64 nLastSelectedTime = rMarkList.GetMark(0)->getTimeStamp(); + for (size_t a = 1; a < nMarked; ++a) + { + sal_Int64 nCandidateTime = rMarkList.GetMark(a)->getTimeStamp(); + if (nCandidateTime > nLastSelectedTime) + { + nLastSelectedTime = nCandidateTime; + nLastSelected = a; + } + } + + SdrObject* pLastSelectedObj = rMarkList.GetMark(nLastSelected)->GetMarkedSdrObj(); + Size aLastRectSize(pLastSelectedObj->GetLogicRect().GetSize()); + + const bool bUndo = IsUndoEnabled(); + + if (bUndo) + BegUndo(); + + for (size_t a = 0; a < nMarked; ++a) + { + if (a == nLastSelected) + continue; + SdrMark* pM = rMarkList.GetMark(a); + SdrObject* pObj = pM->GetMarkedSdrObj(); + tools::Rectangle aLogicRect(pObj->GetLogicRect()); + Size aLogicRectSize(aLogicRect.GetSize()); + if (bWidth) + aLogicRectSize.setWidth( aLastRectSize.Width() ); + else + aLogicRectSize.setHeight( aLastRectSize.Height() ); + aLogicRect.SetSize(aLogicRectSize); + if (bUndo) + AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoGeoObject(*pObj)); + pObj->SetLogicRect(aLogicRect); + } + + SetUndoComment( + SvxResId(bWidth ? STR_EqualizeWidthMarkedObjects : STR_EqualizeHeightMarkedObjects), + rMarkList.GetMarkDescription()); + + if (bUndo) + EndUndo(); +} + +void SdrEditView::CombineMarkedTextObjects() +{ + SdrPageView* pPageView = GetSdrPageView(); + if ( !pPageView || pPageView->IsLayerLocked( GetActiveLayer() ) ) + return; + + bool bUndo = IsUndoEnabled(); + + // Undo-String will be set later + if ( bUndo ) + BegUndo(); + + SdrOutliner& rDrawOutliner = getSdrModelFromSdrView().GetDrawOutliner(); + + SdrObjListIter aIter( GetMarkedObjectList(), SdrIterMode::Flat); + while ( aIter.IsMore() ) + { + SdrObject* pObj = aIter.Next(); + SdrTextObj* pTextObj = dynamic_cast<SdrTextObj*>( pObj ); + const OutlinerParaObject* pOPO = pTextObj ? pTextObj->GetOutlinerParaObject() : nullptr; + if ( pOPO && pTextObj->IsTextFrame() + && pTextObj->GetObjIdentifier() == SdrObjKind::Text // not callouts (OBJ_CAPTION) + && !pTextObj->IsOutlText() // not impress presentation objects + && pTextObj->GetMergedItem(XATTR_FORMTXTSTYLE).GetValue() == XFormTextStyle::NONE // not Fontwork + ) + { + // if the last paragraph does not end in paragraph-end punctuation (ignoring whitespace), + // assume this text should be added to the end of the last paragraph, instead of starting a new paragraph. + const sal_Int32 nPara = rDrawOutliner.GetParagraphCount(); + const OUString sLastPara = nPara ? rDrawOutliner.GetText( rDrawOutliner.GetParagraph( nPara - 1 ) ) : ""; + sal_Int32 n = sLastPara.getLength(); + while ( n && unicode::isWhiteSpace( sLastPara[--n] ) ) + ; + //TODO: find way to use Locale to identify sentence final punctuation. Copied IsSentenceAtEnd() from autofmt.cxx + const bool bAppend = !n || ( sLastPara[n] != '.' && sLastPara[n] != '?' && sLastPara[n] != '!' ); + rDrawOutliner.AddText( *pOPO, bAppend ); + } + else + { + // Unmark non-textboxes, because all marked objects are deleted at the end. AdjustMarkHdl later. + MarkObj(pObj, pPageView, /*bUnmark=*/true, /*bImpNoSetMarkHdl=*/true); + } + } + + MarkListHasChanged(); + AdjustMarkHdl(); + + if ( GetMarkedObjectCount() > 1 ) + { + SdrRectObj* pReplacement = new SdrRectObj( getSdrModelFromSdrView(), SdrObjKind::Text ); + pReplacement->SetOutlinerParaObject( rDrawOutliner.CreateParaObject() ); + pReplacement->SetSnapRect( GetMarkedObjRect() ); + + const SdrInsertFlags nFlags = SdrInsertFlags::DONTMARK | SdrInsertFlags::SETDEFLAYER; + if ( InsertObjectAtView( pReplacement, *pPageView, nFlags ) ) + DeleteMarkedObj(); + } + + if ( bUndo ) + EndUndo(); + + return; +} + +void SdrEditView::CombineMarkedObjects(bool bNoPolyPoly) +{ + // #105899# Start of Combine-Undo put to front, else ConvertMarkedToPolyObj would + // create a 2nd Undo-action and Undo-Comment. + + bool bUndo = IsUndoEnabled(); + + // Undo-String will be set later + if( bUndo ) + BegUndo("", "", bNoPolyPoly ? SdrRepeatFunc::CombineOnePoly : SdrRepeatFunc::CombinePolyPoly); + + // #105899# First, guarantee that all objects are converted to polyobjects, + // especially for SdrGrafObj with bitmap filling this is necessary to not + // lose the bitmap filling. + + // #i12392# + // ConvertMarkedToPolyObj was too strong here, it will lose quality and + // information when curve objects are combined. This can be replaced by + // using ConvertMarkedToPathObj without changing the previous fix. + + // #i21250# + // Instead of simply passing true as LineToArea, use bNoPolyPoly as info + // if this command is a 'Combine' or a 'Connect' command. On Connect it's true. + // To not concert line segments with a set line width to polygons in that case, + // use this info. Do not convert LineToArea on Connect commands. + // ConvertMarkedToPathObj(!bNoPolyPoly); + + // This is used for Combine and Connect. In no case it is necessary to force + // the content to curve, but it is also not good to force to polygons. Thus, + // curve is the less information losing one. Remember: This place is not + // used for merge. + // LineToArea is never necessary, both commands are able to take over the + // set line style and to display it correctly. Thus, i will use a + // ConvertMarkedToPathObj with a false in any case. Only drawback is that + // simple polygons will be changed to curves, but with no information loss. + ConvertMarkedToPathObj(false /* bLineToArea */); + + // continue as before + basegfx::B2DPolyPolygon aPolyPolygon; + SdrObjList* pCurrentOL = nullptr; + SdrMarkList aRemoveBuffer; + + SortMarkedObjects(); + size_t nInsPos = SAL_MAX_SIZE; + SdrObjList* pInsOL = nullptr; + SdrPageView* pInsPV = nullptr; + const SdrObject* pAttrObj = nullptr; + + for(size_t a = GetMarkedObjectCount(); a; ) + { + --a; + SdrMark* pM = GetSdrMarkByIndex(a); + SdrObject* pObj = pM->GetMarkedSdrObj(); + SdrObjList* pThisOL = pObj->getParentSdrObjListFromSdrObject(); + + if(pCurrentOL != pThisOL) + { + pCurrentOL = pThisOL; + } + + if(ImpCanConvertForCombine(pObj)) + { + // remember objects to be able to copy attributes + pAttrObj = pObj; + + // unfortunately ConvertMarkedToPathObj has converted all + // involved polygon data to curve segments, even if not necessary. + // It is better to try to reduce to more simple polygons. + basegfx::B2DPolyPolygon aTmpPoly(basegfx::utils::simplifyCurveSegments(ImpGetPolyPolygon(pObj))); + aPolyPolygon.insert(0, aTmpPoly); + + if(!pInsOL) + { + nInsPos = pObj->GetOrdNum() + 1; + pInsPV = pM->GetPageView(); + pInsOL = pObj->getParentSdrObjListFromSdrObject(); + } + + aRemoveBuffer.InsertEntry(SdrMark(pObj, pM->GetPageView())); + } + } + + if(bNoPolyPoly) + { + basegfx::B2DPolygon aCombinedPolygon(ImpCombineToSinglePolygon(aPolyPolygon)); + aPolyPolygon.clear(); + aPolyPolygon.append(aCombinedPolygon); + } + + const sal_uInt32 nPolyCount(aPolyPolygon.count()); + + if (nPolyCount && pAttrObj) + { + SdrObjKind eKind = SdrObjKind::PathFill; + + if(nPolyCount > 1) + { + aPolyPolygon.setClosed(true); + } + else + { + // check for Polyline + const basegfx::B2DPolygon aPolygon(aPolyPolygon.getB2DPolygon(0)); + const sal_uInt32 nPointCount(aPolygon.count()); + + if(nPointCount <= 2) + { + eKind = SdrObjKind::PathLine; + } + else + { + if(!aPolygon.isClosed()) + { + const basegfx::B2DPoint aPointA(aPolygon.getB2DPoint(0)); + const basegfx::B2DPoint aPointB(aPolygon.getB2DPoint(nPointCount - 1)); + const double fDistance(basegfx::B2DVector(aPointB - aPointA).getLength()); + const double fJoinTolerance(10.0); + + if(fDistance < fJoinTolerance) + { + aPolyPolygon.setClosed(true); + } + else + { + eKind = SdrObjKind::PathLine; + } + } + } + } + + SdrPathObj* pPath = new SdrPathObj(pAttrObj->getSdrModelFromSdrObject(), eKind, aPolyPolygon); + + // attributes of the lowest object + ImpCopyAttributes(pAttrObj, pPath); + + // If LineStyle of pAttrObj is drawing::LineStyle_NONE force to drawing::LineStyle_SOLID to make visible. + const drawing::LineStyle eLineStyle = pAttrObj->GetMergedItem(XATTR_LINESTYLE).GetValue(); + const drawing::FillStyle eFillStyle = pAttrObj->GetMergedItem(XATTR_FILLSTYLE).GetValue(); + + // Take fill style/closed state of pAttrObj in account when deciding to change the line style + bool bIsClosedPathObj = false; + if (auto pPathObj = dynamic_cast<const SdrPathObj*>(pAttrObj)) + if (pPathObj->IsClosed()) + bIsClosedPathObj = true; + + if(drawing::LineStyle_NONE == eLineStyle && (drawing::FillStyle_NONE == eFillStyle || !bIsClosedPathObj)) + { + pPath->SetMergedItem(XLineStyleItem(drawing::LineStyle_SOLID)); + } + + pInsOL->InsertObject(pPath,nInsPos); + if( bUndo ) + AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoNewObject(*pPath)); + + // Here was a severe error: Without UnmarkAllObj, the new object was marked + // additionally to the two ones which are deleted below. As long as those are + // in the UNDO there is no problem, but as soon as they get deleted, the + // MarkList will contain deleted objects -> GPF. + UnmarkAllObj(pInsPV); + MarkObj(pPath, pInsPV, false, true); + } + + // build an UndoComment from the objects actually used + aRemoveBuffer.ForceSort(); // important for remove (see below) + if( bUndo ) + SetUndoComment(SvxResId(bNoPolyPoly?STR_EditCombine_OnePoly:STR_EditCombine_PolyPoly),aRemoveBuffer.GetMarkDescription()); + + // remove objects actually used from the list + DeleteMarkedList(aRemoveBuffer); + if( bUndo ) + EndUndo(); +} + + +// Dismantle + + +bool SdrEditView::ImpCanDismantle(const basegfx::B2DPolyPolygon& rPpolyPolygon, bool bMakeLines) +{ + bool bCan(false); + const sal_uInt32 nPolygonCount(rPpolyPolygon.count()); + + if(nPolygonCount >= 2) + { + // #i69172# dismantle makes sense with 2 or more polygons in a polyPolygon + bCan = true; + } + else if(bMakeLines && 1 == nPolygonCount) + { + // #i69172# ..or with at least 2 edges (curves or lines) + const basegfx::B2DPolygon& aPolygon(rPpolyPolygon.getB2DPolygon(0)); + const sal_uInt32 nPointCount(aPolygon.count()); + + if(nPointCount > 2) + { + bCan = true; + } + } + + return bCan; +} + +bool SdrEditView::ImpCanDismantle(const SdrObject* pObj, bool bMakeLines) +{ + bool bOtherObjs(false); // true=objects other than PathObj's existent + bool bMin1PolyPoly(false); // true=at least 1 tools::PolyPolygon with more than one Polygon existent + SdrObjList* pOL = pObj->GetSubList(); + + if(pOL) + { + // group object -- check all members if they're PathObjs + SdrObjListIter aIter(pOL, SdrIterMode::DeepNoGroups); + + while(aIter.IsMore() && !bOtherObjs) + { + const SdrObject* pObj1 = aIter.Next(); + const SdrPathObj* pPath = dynamic_cast<const SdrPathObj*>( pObj1 ); + + if(pPath) + { + if(ImpCanDismantle(pPath->GetPathPoly(), bMakeLines)) + { + bMin1PolyPoly = true; + } + + SdrObjTransformInfoRec aInfo; + pObj1->TakeObjInfo(aInfo); + + if(!aInfo.bCanConvToPath) + { + // happens e. g. in the case of FontWork + bOtherObjs = true; + } + } + else + { + bOtherObjs = true; + } + } + } + else + { + const SdrPathObj* pPath = dynamic_cast<const SdrPathObj*>(pObj); + const SdrObjCustomShape* pCustomShape = dynamic_cast<const SdrObjCustomShape*>(pObj); + + // #i37011# + if(pPath) + { + if(ImpCanDismantle(pPath->GetPathPoly(),bMakeLines)) + { + bMin1PolyPoly = true; + } + + SdrObjTransformInfoRec aInfo; + pObj->TakeObjInfo(aInfo); + + // new condition IsLine() to be able to break simple Lines + if(!(aInfo.bCanConvToPath || aInfo.bCanConvToPoly) && !pPath->IsLine()) + { + // happens e. g. in the case of FontWork + bOtherObjs = true; + } + } + else if(pCustomShape) + { + if(bMakeLines) + { + // allow break command + bMin1PolyPoly = true; + } + } + else + { + bOtherObjs = true; + } + } + return bMin1PolyPoly && !bOtherObjs; +} + +void SdrEditView::ImpDismantleOneObject(const SdrObject* pObj, SdrObjList& rOL, size_t& rPos, SdrPageView* pPV, bool bMakeLines) +{ + const SdrPathObj* pSrcPath = dynamic_cast<const SdrPathObj*>( pObj ); + const SdrObjCustomShape* pCustomShape = dynamic_cast<const SdrObjCustomShape*>( pObj ); + + const bool bUndo = IsUndoEnabled(); + + if(pSrcPath) + { + // #i74631# redesigned due to XpolyPolygon removal and explicit constructors + SdrObject* pLast = nullptr; // to be able to apply OutlinerParaObject + const basegfx::B2DPolyPolygon& rPolyPolygon(pSrcPath->GetPathPoly()); + const sal_uInt32 nPolyCount(rPolyPolygon.count()); + + for(sal_uInt32 a(0); a < nPolyCount; a++) + { + const basegfx::B2DPolygon& rCandidate(rPolyPolygon.getB2DPolygon(a)); + const sal_uInt32 nPointCount(rCandidate.count()); + + if(!bMakeLines || nPointCount < 2) + { + SdrPathObj* pPath = new SdrPathObj( + pSrcPath->getSdrModelFromSdrObject(), + pSrcPath->GetObjIdentifier(), + basegfx::B2DPolyPolygon(rCandidate)); + ImpCopyAttributes(pSrcPath, pPath); + pLast = pPath; + rOL.InsertObject(pPath, rPos); + if( bUndo ) + AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoNewObject(*pPath, true)); + MarkObj(pPath, pPV, false, true); + rPos++; + } + else + { + const sal_uInt32 nLoopCount(rCandidate.isClosed() ? nPointCount : nPointCount - 1); + + for(sal_uInt32 b(0); b < nLoopCount; b++) + { + SdrObjKind eKind(SdrObjKind::PolyLine); + basegfx::B2DPolygon aNewPolygon; + const sal_uInt32 nNextIndex((b + 1) % nPointCount); + + aNewPolygon.append(rCandidate.getB2DPoint(b)); + + if(rCandidate.areControlPointsUsed()) + { + aNewPolygon.appendBezierSegment( + rCandidate.getNextControlPoint(b), + rCandidate.getPrevControlPoint(nNextIndex), + rCandidate.getB2DPoint(nNextIndex)); + eKind = SdrObjKind::PathLine; + } + else + { + aNewPolygon.append(rCandidate.getB2DPoint(nNextIndex)); + } + + SdrPathObj* pPath = new SdrPathObj( + pSrcPath->getSdrModelFromSdrObject(), + eKind, + basegfx::B2DPolyPolygon(aNewPolygon)); + ImpCopyAttributes(pSrcPath, pPath); + pLast = pPath; + rOL.InsertObject(pPath, rPos); + if( bUndo ) + AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoNewObject(*pPath, true)); + MarkObj(pPath, pPV, false, true); + rPos++; + } + } + } + + if(pLast && pSrcPath->GetOutlinerParaObject()) + { + pLast->SetOutlinerParaObject(*pSrcPath->GetOutlinerParaObject()); + } + } + else if(pCustomShape) + { + if(bMakeLines) + { + // break up custom shape + const SdrObject* pReplacement = pCustomShape->GetSdrObjectFromCustomShape(); + + if(pReplacement) + { + SdrObject* pCandidate(pReplacement->CloneSdrObject(pReplacement->getSdrModelFromSdrObject())); + DBG_ASSERT(pCandidate, "SdrEditView::ImpDismantleOneObject: Could not clone SdrObject (!)"); + + if(pCustomShape->GetMergedItem(SDRATTR_SHADOW).GetValue()) + { + if(dynamic_cast<const SdrObjGroup*>( pReplacement) != nullptr) + { + pCandidate->SetMergedItem(makeSdrShadowItem(true)); + } + } + + rOL.InsertObject(pCandidate, rPos); + if( bUndo ) + AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoNewObject(*pCandidate, true)); + MarkObj(pCandidate, pPV, false, true); + + if(pCustomShape->HasText() && !pCustomShape->IsTextPath()) + { + // #i37011# also create a text object and add at rPos + 1 + SdrObject* pTextObj = SdrObjFactory::MakeNewObject( + pCustomShape->getSdrModelFromSdrObject(), + pCustomShape->GetObjInventor(), + SdrObjKind::Text); + + // Copy text content + OutlinerParaObject* pParaObj = pCustomShape->GetOutlinerParaObject(); + if(pParaObj) + { + pTextObj->NbcSetOutlinerParaObject(*pParaObj); + } + + // copy all attributes + SfxItemSet aTargetItemSet(pCustomShape->GetMergedItemSet()); + + // clear fill and line style + aTargetItemSet.Put(XLineStyleItem(drawing::LineStyle_NONE)); + aTargetItemSet.Put(XFillStyleItem(drawing::FillStyle_NONE)); + + // get the text bounds and set at text object + tools::Rectangle aTextBounds = pCustomShape->GetSnapRect(); + if(pCustomShape->GetTextBounds(aTextBounds)) + { + pTextObj->SetSnapRect(aTextBounds); + } + + // if rotated, copy GeoStat, too. + const GeoStat& rSourceGeo = pCustomShape->GetGeoStat(); + if(rSourceGeo.nRotationAngle) + { + pTextObj->NbcRotate( + pCustomShape->GetSnapRect().Center(), rSourceGeo.nRotationAngle, + rSourceGeo.mfSinRotationAngle, rSourceGeo.mfCosRotationAngle); + } + + // set modified ItemSet at text object + pTextObj->SetMergedItemSet(aTargetItemSet); + + // insert object + rOL.InsertObject(pTextObj, rPos + 1); + if( bUndo ) + AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoNewObject(*pTextObj, true)); + MarkObj(pTextObj, pPV, false, true); + } + } + } + } +} + +void SdrEditView::DismantleMarkedObjects(bool bMakeLines) +{ + // temporary MarkList + SdrMarkList aRemoveBuffer; + + SortMarkedObjects(); + + const bool bUndo = IsUndoEnabled(); + + if( bUndo ) + { + // comment is constructed later + BegUndo("", "", bMakeLines ? SdrRepeatFunc::DismantleLines : SdrRepeatFunc::DismantlePolys); + } + + SdrObjList* pOL0=nullptr; + for (size_t nm=GetMarkedObjectCount(); nm>0;) { + --nm; + SdrMark* pM=GetSdrMarkByIndex(nm); + SdrObject* pObj=pM->GetMarkedSdrObj(); + SdrPageView* pPV=pM->GetPageView(); + SdrObjList* pOL=pObj->getParentSdrObjListFromSdrObject(); + if (pOL!=pOL0) { pOL0=pOL; pObj->GetOrdNum(); } // make sure OrdNums are correct! + if (ImpCanDismantle(pObj,bMakeLines)) { + aRemoveBuffer.InsertEntry(SdrMark(pObj,pM->GetPageView())); + const size_t nPos0=pObj->GetOrdNumDirect(); + size_t nPos=nPos0+1; + SdrObjList* pSubList=pObj->GetSubList(); + if (pSubList!=nullptr && !pObj->Is3DObj()) { + SdrObjListIter aIter(pSubList,SdrIterMode::DeepNoGroups); + while (aIter.IsMore()) { + const SdrObject* pObj1=aIter.Next(); + ImpDismantleOneObject(pObj1,*pOL,nPos,pPV,bMakeLines); + } + } else { + ImpDismantleOneObject(pObj,*pOL,nPos,pPV,bMakeLines); + } + if( bUndo ) + AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoDeleteObject(*pObj,true)); + pOL->RemoveObject(nPos0); + + if( !bUndo ) + SdrObject::Free(pObj); + } + } + + if( bUndo ) + { + // construct UndoComment from objects actually used + SetUndoComment(SvxResId(bMakeLines?STR_EditDismantle_Lines:STR_EditDismantle_Polys),aRemoveBuffer.GetMarkDescription()); + // remove objects actually used from the list + EndUndo(); + } +} + + +// Group + + +void SdrEditView::GroupMarked() +{ + if (!AreObjectsMarked()) + return; + + SortMarkedObjects(); + + const bool bUndo = IsUndoEnabled(); + if( bUndo ) + { + BegUndo(SvxResId(STR_EditGroup),GetDescriptionOfMarkedObjects(),SdrRepeatFunc::Group); + + for(size_t nm = GetMarkedObjectCount(); nm>0; ) + { + // add UndoActions for all affected objects + --nm; + SdrMark* pM=GetSdrMarkByIndex(nm); + SdrObject* pObj = pM->GetMarkedSdrObj(); + AddUndoActions( CreateConnectorUndo( *pObj ) ); + AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoRemoveObject( *pObj )); + } + } + + SdrMarkList aNewMark; + SdrPageView* pPV = GetSdrPageView(); + + if(pPV) + { + SdrObjList* pCurrentLst=pPV->GetObjList(); + SdrObjList* pSrcLst=pCurrentLst; + SdrObjList* pSrcLst0=pSrcLst; + // make sure OrdNums are correct + if (pSrcLst->IsObjOrdNumsDirty()) + pSrcLst->RecalcObjOrdNums(); + SdrObject* pGrp=nullptr; + SdrObjList* pDstLst=nullptr; + // if all selected objects come from foreign object lists. + // the group object is the last one in the list. + size_t nInsPos=pSrcLst->GetObjCount(); + bool bNeedInsPos=true; + for (size_t nm=GetMarkedObjectCount(); nm>0;) + { + --nm; + SdrMark* pM=GetSdrMarkByIndex(nm); + if (pM->GetPageView()==pPV) + { + SdrObject* pObj=pM->GetMarkedSdrObj(); + if (nullptr==pGrp) + { + pGrp = new SdrObjGroup(pObj->getSdrModelFromSdrObject()); + pDstLst=pGrp->GetSubList(); + DBG_ASSERT(pDstLst!=nullptr,"Alleged group object doesn't return object list."); + } + pSrcLst=pObj->getParentSdrObjListFromSdrObject(); + if (pSrcLst!=pSrcLst0) + { + if (pSrcLst->IsObjOrdNumsDirty()) + pSrcLst->RecalcObjOrdNums(); + } + bool bForeignList=pSrcLst!=pCurrentLst; + if (!bForeignList && bNeedInsPos) + { + nInsPos=pObj->GetOrdNum(); // this way, all ObjOrdNum of the page are set + nInsPos++; + bNeedInsPos=false; + } + pSrcLst->RemoveObject(pObj->GetOrdNumDirect()); + if (!bForeignList) + nInsPos--; // correct InsertPos + pDstLst->InsertObject(pObj,0); + GetMarkedObjectListWriteAccess().DeleteMark(nm); + pSrcLst0=pSrcLst; + } + } + if (pGrp!=nullptr) + { + aNewMark.InsertEntry(SdrMark(pGrp,pPV)); + const size_t nCount=pDstLst->GetObjCount(); + pCurrentLst->InsertObject(pGrp,nInsPos); + if( bUndo ) + { + AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoNewObject(*pGrp,true)); // no recalculation! + for (size_t no=0; no<nCount; ++no) + { + AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoInsertObject(*pDstLst->GetObj(no))); + } + } + } + } + GetMarkedObjectListWriteAccess().Merge(aNewMark); + MarkListHasChanged(); + + if( bUndo ) + EndUndo(); +} + + +// Ungroup + + +void SdrEditView::UnGroupMarked() +{ + SdrMarkList aNewMark; + + const bool bUndo = IsUndoEnabled(); + if( bUndo ) + BegUndo("", "", SdrRepeatFunc::Ungroup); + + size_t nCount=0; + OUString aName1; + OUString aName; + bool bNameOk=false; + for (size_t nm=GetMarkedObjectCount(); nm>0;) { + --nm; + SdrMark* pM=GetSdrMarkByIndex(nm); + SdrObject* pGrp=pM->GetMarkedSdrObj(); + SdrObjList* pSrcLst=pGrp->GetSubList(); + if (pSrcLst!=nullptr) { + nCount++; + if (nCount==1) { + aName = pGrp->TakeObjNameSingul(); // retrieve name of group + aName1 = pGrp->TakeObjNamePlural(); // retrieve name of group + bNameOk=true; + } else { + if (nCount==2) aName=aName1; // set plural name + if (bNameOk) { + OUString aStr(pGrp->TakeObjNamePlural()); // retrieve name of group + + if (aStr != aName) + bNameOk = false; + } + } + size_t nDstCnt=pGrp->GetOrdNum(); + SdrObjList* pDstLst=pM->GetPageView()->GetObjList(); + size_t nObjCount=pSrcLst->GetObjCount(); + const bool bIsDiagram(pGrp->isDiagram()); + + // If the Group is a Diagram, it has a filler BG object to guarantee + // the Diagam's dimensions. Identify that shape + if(bIsDiagram && nObjCount) + { + SdrObject* pObj(pSrcLst->GetObj(0)); + + if(nullptr != pObj && !pObj->IsGroupObject() && + !pObj->HasLineStyle() && + pObj->IsMoveProtect() && pObj->IsResizeProtect()) + { + if(pObj->HasFillStyle()) + { + // If it has FillStyle it is a useful object representing that possible + // defined fill from oox import. In this case, we should remove the + // Move/Resize protection to allow seamless further processing. + + // Undo of these is handled by SdrUndoGeoObj which holds a SdrObjGeoData, + // create one + if( bUndo ) + AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoGeoObject(*pObj)); + + pObj->SetMoveProtect(false); + pObj->SetResizeProtect(false); + } + else + { + // If it has no FillStyle it is not useful for any further processing + // but only was used as a placeholder, get directly rid of it + if( bUndo ) + AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoDeleteObject(*pObj)); + + pObj = pSrcLst->RemoveObject(0); + + if( !bUndo ) + SdrObject::Free(pObj); + + nObjCount = pSrcLst->GetObjCount(); + } + } + } + + // FIRST move contained objects to parent of group, so that + // the contained objects are NOT migrated to the UNDO-ItemPool + // when AddUndo(new SdrUndoDelObj(*pGrp)) is called. + if( bUndo ) + { + for (size_t no=nObjCount; no>0;) + { + no--; + SdrObject* pObj=pSrcLst->GetObj(no); + AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoRemoveObject(*pObj)); + } + } + + for (size_t no=0; no<nObjCount; ++no) + { + SdrObject* pObj=pSrcLst->RemoveObject(0); + pDstLst->InsertObject(pObj,nDstCnt); + if( bUndo ) + AddUndo( GetModel()->GetSdrUndoFactory().CreateUndoInsertObject(*pObj,true)); + nDstCnt++; + // No SortCheck when inserting into MarkList, because that would + // provoke a RecalcOrdNums() each time because of pObj->GetOrdNum(): + aNewMark.InsertEntry(SdrMark(pObj,pM->GetPageView()),false); + } + + if( bUndo ) + { + // Now it is safe to add the delete-UNDO which triggers the + // MigrateItemPool now only for itself, not for the sub-objects. + // nDstCnt is right, because previous inserts move group + // object deeper and increase nDstCnt. + AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoDeleteObject(*pGrp)); + } + pDstLst->RemoveObject(nDstCnt); + + if( !bUndo ) + SdrObject::Free(pGrp); + + GetMarkedObjectListWriteAccess().DeleteMark(nm); + } + } + if (nCount!=0) + { + if (!bNameOk) + aName=SvxResId(STR_ObjNamePluralGRUP); // Use the term "Group Objects," if different objects are grouped. + SetUndoComment(SvxResId(STR_EditUngroup),aName); + } + + if( bUndo ) + EndUndo(); + + if (nCount!=0) + { + GetMarkedObjectListWriteAccess().Merge(aNewMark,true); // Because of the sorting above, aNewMark is reversed + MarkListHasChanged(); + } +} + + +// ConvertToPoly + + +SdrObject* SdrEditView::ImpConvertOneObj(SdrObject* pObj, bool bPath, bool bLineToArea) +{ + SdrObjectUniquePtr pNewObj = pObj->ConvertToPolyObj(bPath, bLineToArea); + if (pNewObj) + { + SdrObjList* pOL = pObj->getParentSdrObjListFromSdrObject(); + const bool bUndo = IsUndoEnabled(); + if( bUndo ) + AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoReplaceObject(*pObj,*pNewObj)); + + // ownership passed into here (despite the UniquePtr indicating that we are returning it) + pOL->ReplaceObject(pNewObj.get(), pObj->GetOrdNum()); + + if( !bUndo ) + SdrObject::Free(pObj); + } + return pNewObj.release(); +} + +void SdrEditView::ImpConvertTo(bool bPath, bool bLineToArea) +{ + if (!AreObjectsMarked()) return; + + bool bMrkChg = false; + const size_t nMarkCount=GetMarkedObjectCount(); + TranslateId pDscrID; + if(bLineToArea) + { + if(nMarkCount == 1) + pDscrID = STR_EditConvToContour; + else + pDscrID = STR_EditConvToContours; + + BegUndo(SvxResId(pDscrID), GetDescriptionOfMarkedObjects()); + } + else + { + if (bPath) { + if (nMarkCount==1) pDscrID=STR_EditConvToCurve; + else pDscrID=STR_EditConvToCurves; + BegUndo(SvxResId(pDscrID),GetDescriptionOfMarkedObjects(),SdrRepeatFunc::ConvertToPath); + } else { + if (nMarkCount==1) pDscrID=STR_EditConvToPoly; + else pDscrID=STR_EditConvToPolys; + BegUndo(SvxResId(pDscrID),GetDescriptionOfMarkedObjects(),SdrRepeatFunc::ConvertToPoly); + } + } + for (size_t nm=nMarkCount; nm>0;) { + --nm; + SdrMark* pM=GetSdrMarkByIndex(nm); + SdrObject* pObj=pM->GetMarkedSdrObj(); + SdrPageView* pPV=pM->GetPageView(); + if (pObj->IsGroupObject() && !pObj->Is3DObj()) { + SdrObject* pGrp=pObj; + SdrObjListIter aIter(*pGrp, SdrIterMode::DeepNoGroups); + while (aIter.IsMore()) { + pObj=aIter.Next(); + ImpConvertOneObj(pObj,bPath,bLineToArea); + } + } else { + SdrObject* pNewObj=ImpConvertOneObj(pObj,bPath,bLineToArea); + if (pNewObj!=nullptr) { + bMrkChg=true; + GetMarkedObjectListWriteAccess().ReplaceMark(SdrMark(pNewObj,pPV),nm); + } + } + } + EndUndo(); + if (bMrkChg) + { + AdjustMarkHdl(); + MarkListHasChanged(); + } +} + +void SdrEditView::ConvertMarkedToPathObj(bool bLineToArea) +{ + ImpConvertTo(true, bLineToArea); +} + +void SdrEditView::ConvertMarkedToPolyObj() +{ + ImpConvertTo(false, false/*bLineToArea*/); +} + +namespace +{ + GDIMetaFile GetMetaFile(SdrGrafObj const * pGraf) + { + if (pGraf->HasGDIMetaFile()) + return pGraf->GetTransformedGraphic(SdrGrafObjTransformsAttrs::MIRROR).GetGDIMetaFile(); + assert(pGraf->isEmbeddedVectorGraphicData()); + return pGraf->getMetafileFromEmbeddedVectorGraphicData(); + } +} + +// Metafile Import +void SdrEditView::DoImportMarkedMtf(SvdProgressInfo *pProgrInfo) +{ + const bool bUndo = IsUndoEnabled(); + + if( bUndo ) + BegUndo("", "", SdrRepeatFunc::ImportMtf); + + SortMarkedObjects(); + SdrMarkList aForTheDescription; + SdrMarkList aNewMarked; + for (size_t nm =GetMarkedObjectCount(); nm > 0; ) + { + // create Undo objects for all new objects + // check for cancellation between the metafiles + if (pProgrInfo != nullptr) + { + pProgrInfo->SetNextObject(); + if (!pProgrInfo->ReportActions(0)) + break; + } + + --nm; + SdrMark* pM=GetSdrMarkByIndex(nm); + SdrObject* pObj=pM->GetMarkedSdrObj(); + SdrPageView* pPV=pM->GetPageView(); + SdrObjList* pOL=pObj->getParentSdrObjListFromSdrObject(); + const size_t nInsPos=pObj->GetOrdNum()+1; + size_t nInsCnt=0; + tools::Rectangle aLogicRect; + + SdrGrafObj* pGraf = dynamic_cast<SdrGrafObj*>( pObj ); + if (pGraf != nullptr) + { + Graphic aGraphic = pGraf->GetGraphic(); + auto const & pVectorGraphicData = aGraphic.getVectorGraphicData(); + + if (pVectorGraphicData && pVectorGraphicData->getType() == VectorGraphicDataType::Pdf) + { + auto pPdfium = vcl::pdf::PDFiumLibrary::get(); + if (pPdfium) + { + aLogicRect = pGraf->GetLogicRect(); + ImpSdrPdfImport aFilter(*mpModel, pObj->GetLayer(), aLogicRect, aGraphic); + if (aGraphic.getPageNumber() < aFilter.GetPageCount()) + { + nInsCnt = aFilter.DoImport(*pOL, nInsPos, aGraphic.getPageNumber(), pProgrInfo); + } + } + } + else if (pGraf->HasGDIMetaFile() || pGraf->isEmbeddedVectorGraphicData() ) + { + GDIMetaFile aMetaFile(GetMetaFile(pGraf)); + if (aMetaFile.GetActionSize()) + { + aLogicRect = pGraf->GetLogicRect(); + ImpSdrGDIMetaFileImport aFilter(*mpModel, pObj->GetLayer(), aLogicRect); + nInsCnt = aFilter.DoImport(aMetaFile, *pOL, nInsPos, pProgrInfo); + } + } + } + + SdrOle2Obj* pOle2 = dynamic_cast<SdrOle2Obj*>(pObj); + if (pOle2 != nullptr && pOle2->GetGraphic()) + { + aLogicRect = pOle2->GetLogicRect(); + ImpSdrGDIMetaFileImport aFilter(*mpModel, pObj->GetLayer(), aLogicRect); + nInsCnt = aFilter.DoImport(pOle2->GetGraphic()->GetGDIMetaFile(), *pOL, nInsPos, pProgrInfo); + } + + if (nInsCnt != 0) + { + // transformation + GeoStat aGeoStat(pGraf ? pGraf->GetGeoStat() : pOle2->GetGeoStat()); + size_t nObj = nInsPos; + + if (aGeoStat.nShearAngle) + aGeoStat.RecalcTan(); + + if (aGeoStat.nRotationAngle) + aGeoStat.RecalcSinCos(); + + for (size_t i = 0; i < nInsCnt; i++) + { + if (bUndo) + AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoNewObject(*pOL->GetObj(nObj))); + + // update new MarkList + SdrObject* pCandidate = pOL->GetObj(nObj); + + // apply original transformation + if (aGeoStat.nShearAngle) + pCandidate->NbcShear(aLogicRect.TopLeft(), aGeoStat.nShearAngle, aGeoStat.mfTanShearAngle, false); + + if (aGeoStat.nRotationAngle) + pCandidate->NbcRotate(aLogicRect.TopLeft(), aGeoStat.nRotationAngle, aGeoStat.mfSinRotationAngle, aGeoStat.mfCosRotationAngle); + + SdrMark aNewMark(pCandidate, pPV); + aNewMarked.InsertEntry(aNewMark); + + nObj++; + } + + aForTheDescription.InsertEntry(*pM); + + if (bUndo) + AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoDeleteObject(*pObj)); + + // remove object from selection and delete + GetMarkedObjectListWriteAccess().DeleteMark(TryToFindMarkedObject(pObj)); + pOL->RemoveObject(nInsPos-1); + + if (!bUndo) + SdrObject::Free(pObj); + } + } + + if (aNewMarked.GetMarkCount()) + { + // create new selection + for (size_t a = 0; a < aNewMarked.GetMarkCount(); ++a) + { + GetMarkedObjectListWriteAccess().InsertEntry(*aNewMarked.GetMark(a)); + } + + SortMarkedObjects(); + } + + if (bUndo) + { + SetUndoComment(SvxResId(STR_EditImportMtf),aForTheDescription.GetMarkDescription()); + EndUndo(); + } +} + +/* vim:set shiftwidth=4 softtabstop=4 expandtab: */ |