summaryrefslogtreecommitdiffstats
path: root/svx/source/toolbars/extrusionbar.cxx
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--svx/source/toolbars/extrusionbar.cxx1338
1 files changed, 1338 insertions, 0 deletions
diff --git a/svx/source/toolbars/extrusionbar.cxx b/svx/source/toolbars/extrusionbar.cxx
new file mode 100644
index 000000000..3e0273c28
--- /dev/null
+++ b/svx/source/toolbars/extrusionbar.cxx
@@ -0,0 +1,1338 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ * Licensed to the Apache Software Foundation (ASF) under one or more
+ * contributor license agreements. See the NOTICE file distributed
+ * with this work for additional information regarding copyright
+ * ownership. The ASF licenses this file to you under the Apache
+ * License, Version 2.0 (the "License"); you may not use this file
+ * except in compliance with the License. You may obtain a copy of
+ * the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+
+#include <com/sun/star/drawing/EnhancedCustomShapeMetalType.hpp>
+#include <com/sun/star/drawing/EnhancedCustomShapeParameterPair.hpp>
+#include <com/sun/star/drawing/EnhancedCustomShapeParameterType.hpp>
+#include <com/sun/star/drawing/ShadeMode.hpp>
+#include <com/sun/star/drawing/Position3D.hpp>
+#include <com/sun/star/drawing/Direction3D.hpp>
+#include <com/sun/star/drawing/ProjectionMode.hpp>
+#include <svx/svxids.hrc>
+#include <svx/svdundo.hxx>
+#include <sfx2/request.hxx>
+#include <sfx2/objface.hxx>
+#include <sfx2/viewsh.hxx>
+#include <sfx2/bindings.hxx>
+#include <svx/xsflclit.hxx>
+#include <svx/dialmgr.hxx>
+#include <svx/svdoashp.hxx>
+#include <svx/strings.hrc>
+#include <svx/svdview.hxx>
+#include <editeng/colritem.hxx>
+#include <svx/chrtitem.hxx>
+#include <svx/sdasitm.hxx>
+#include <svl/intitem.hxx>
+#include <rtl/math.hxx>
+#include <basegfx/numeric/ftools.hxx>
+
+#include <svx/extrusionbar.hxx>
+#include <extrusiondepthdialog.hxx>
+
+using namespace ::svx;
+using namespace ::cppu;
+using namespace ::com::sun::star::beans;
+using namespace ::com::sun::star::drawing;
+using namespace ::com::sun::star::uno;
+
+// Declare the default interface. (The slotmap must not be empty, so
+// we enter something which never occurs here (hopefully).)
+static SfxSlot aExtrusionBarSlots_Impl[] =
+{
+ { 0, SfxGroupId::NONE, SfxSlotMode::NONE, 0, 0, nullptr, nullptr, nullptr, nullptr, nullptr, 0, SfxDisableFlags::NONE, nullptr }
+};
+
+SFX_IMPL_INTERFACE(ExtrusionBar, SfxShell)
+
+void ExtrusionBar::InitInterface_Impl()
+{
+ GetStaticInterface()->RegisterObjectBar(SFX_OBJECTBAR_OBJECT, SfxVisibilityFlags::Invisible, ToolbarId::Svx_Extrusion_Bar);
+}
+
+
+ExtrusionBar::ExtrusionBar(SfxViewShell* pViewShell )
+: SfxShell(pViewShell)
+{
+ DBG_ASSERT( pViewShell, "svx::ExtrusionBar::ExtrusionBar(), I need a viewshell!" );
+ if( pViewShell )
+ SetPool(&pViewShell->GetPool());
+
+ SetName(SvxResId(RID_SVX_EXTRUSION_BAR));
+}
+
+ExtrusionBar::~ExtrusionBar()
+{
+ SetRepeatTarget(nullptr);
+}
+
+static void getLightingDirectionDefaults( const Direction3D **pLighting1Defaults, const Direction3D **pLighting2Defaults )
+{
+
+ static const Direction3D aLighting1Defaults[9] =
+ {
+ Direction3D( -50000, -50000, 10000 ),
+ Direction3D( 0, -50000, 10000 ),
+ Direction3D( 50000, -50000, 10000 ),
+ Direction3D( -50000, 0, 10000 ),
+ Direction3D( 0, 0, 10000 ),
+ Direction3D( 50000, 0, 10000 ),
+ Direction3D( -50000, 50000, 10000 ),
+ Direction3D( 0, 50000, 10000 ),
+ Direction3D( 50000, 50000, 10000 )
+ };
+
+ static const Direction3D aLighting2Defaults[9] =
+ {
+ Direction3D( 50000,0, 10000 ),
+ Direction3D( 0, 50000, 10000 ),
+ Direction3D( -50000, 0, 10000 ),
+ Direction3D( 50000, 0, 10000 ),
+ Direction3D( 0, 0, 10000 ),
+ Direction3D( -50000, 0, 10000 ),
+ Direction3D( 50000, 0, 10000 ),
+ Direction3D( 0, -50000, 10000 ),
+ Direction3D( -50000, 0, 10000 )
+ };
+
+ *pLighting1Defaults = aLighting1Defaults;
+ *pLighting2Defaults = aLighting2Defaults;
+};
+
+static void impl_execute( SfxRequest const & rReq, SdrCustomShapeGeometryItem& rGeometryItem, SdrObject* pObj )
+{
+ static constexpr OUStringLiteral sExtrusion = u"Extrusion";
+ static constexpr OUStringLiteral sRotateAngle = u"RotateAngle";
+
+ sal_uInt16 nSID = rReq.GetSlot();
+ switch( nSID )
+ {
+ case SID_EXTRUSION_TOGGLE:
+ {
+ bool bOn(false);
+ css::uno::Any* pAny = rGeometryItem.GetPropertyValueByName( sExtrusion, sExtrusion );
+ if ( pAny )
+ {
+ (*pAny) >>= bOn;
+ bOn = !bOn;
+ css::beans::PropertyValue aPropValue;
+ aPropValue.Name = sExtrusion;
+ aPropValue.Value <<= bOn;
+ rGeometryItem.SetPropertyValue(sExtrusion, aPropValue);
+ }
+ else
+ {
+ css::beans::PropertyValue aPropValue;
+ aPropValue.Name = sExtrusion;
+ aPropValue.Value <<= true;
+ rGeometryItem.SetPropertyValue(sExtrusion, aPropValue);
+ bOn = true;
+ }
+
+ // draw:extrusion-diffusion has default 0% and c3DDiffuseAmt has default 100%. We set property
+ // "Diffusion" with value 100% here if it does not exist already. This forces, that the
+ // property is written to file in case an extrusion is newly created, and users of old
+ // documents, which usually do not have this property, can force the value to 100% by toggling
+ // the extrusion off and on.
+ if (bOn)
+ {
+ pAny = rGeometryItem.GetPropertyValueByName(sExtrusion, u"Diffusion");
+ if (!pAny)
+ {
+ css::beans::PropertyValue aPropValue;
+ aPropValue.Name = u"Diffusion";
+ aPropValue.Value <<= 100.0;
+ rGeometryItem.SetPropertyValue( sExtrusion, aPropValue );
+ }
+ }
+ }
+ break;
+
+ case SID_EXTRUSION_TILT_DOWN:
+ case SID_EXTRUSION_TILT_UP:
+ case SID_EXTRUSION_TILT_LEFT:
+ case SID_EXTRUSION_TILT_RIGHT:
+ {
+ bool bHorizontal = ( nSID == SID_EXTRUSION_TILT_DOWN ) || ( nSID == SID_EXTRUSION_TILT_UP );
+ sal_Int32 nDiff = ( nSID == SID_EXTRUSION_TILT_LEFT ) || ( nSID == SID_EXTRUSION_TILT_UP ) ? 5 : -5;
+ EnhancedCustomShapeParameterPair aRotateAnglePropPair;
+ double fX = 0.0;
+ double fY = 0.0;
+ aRotateAnglePropPair.First.Value <<= fX;
+ aRotateAnglePropPair.First.Type = EnhancedCustomShapeParameterType::NORMAL;
+ aRotateAnglePropPair.Second.Value <<= fY;
+ aRotateAnglePropPair.Second.Type = EnhancedCustomShapeParameterType::NORMAL;
+ css::uno::Any* pAny = rGeometryItem.GetPropertyValueByName( sExtrusion, sRotateAngle );
+ if( pAny && ( *pAny >>= aRotateAnglePropPair ) )
+ {
+ aRotateAnglePropPair.First.Value >>= fX;
+ aRotateAnglePropPair.Second.Value >>= fY;
+ }
+ if ( bHorizontal )
+ fX += nDiff;
+ else
+ fY += nDiff;
+ aRotateAnglePropPair.First.Value <<= fX;
+ aRotateAnglePropPair.Second.Value <<= fY;
+ css::beans::PropertyValue aPropValue;
+ aPropValue.Name = sRotateAngle;
+ aPropValue.Value <<= aRotateAnglePropPair;
+ rGeometryItem.SetPropertyValue( sExtrusion, aPropValue );
+ }
+ break;
+
+ case SID_EXTRUSION_DIRECTION:
+ {
+ if( rReq.GetArgs() && rReq.GetArgs()->GetItemState( SID_EXTRUSION_DIRECTION ) == SfxItemState::SET )
+ {
+ sal_Int32 nSkew = rReq.GetArgs()->GetItem<SfxInt32Item>(SID_EXTRUSION_DIRECTION)->GetValue();
+
+ Position3D aViewPoint( 3472, -3472, 25000 );
+ double fOriginX = 0.50;
+ double fOriginY = -0.50;
+ double fSkewAngle = nSkew;
+ double fSkew = 50.0;
+
+ switch( nSkew )
+ {
+ case 135:
+ aViewPoint.PositionY = 3472;
+ fOriginY = 0.50;
+ break;
+ case 90:
+ aViewPoint.PositionX = 0;
+ aViewPoint.PositionY = 3472;
+ fOriginX = 0;
+ fOriginY = 0.50;
+ break;
+ case 45:
+ aViewPoint.PositionX = -3472;
+ aViewPoint.PositionY = 3472;
+ fOriginX = -0.50;
+ fOriginY = 0.50;
+ break;
+ case 180:
+ aViewPoint.PositionY = 0;
+ fOriginY = 0;
+ break;
+ case 0:
+ aViewPoint.PositionX = 0;
+ aViewPoint.PositionY = 0;
+ fOriginX = 0;
+ fOriginY = 0;
+ fSkew = 0.0;
+ break;
+ case -360:
+ aViewPoint.PositionX = -3472;
+ aViewPoint.PositionY = 0;
+ fOriginX = -0.50;
+ fOriginY = 0;
+ break;
+ case -90:
+ aViewPoint.PositionX = 0;
+ fOriginX = 0;
+ break;
+ case -45:
+ aViewPoint.PositionX = -3472;
+ fOriginX = -0.50;
+ break;
+ }
+
+ css::beans::PropertyValue aPropValue;
+
+ aPropValue.Name = "ViewPoint";
+ aPropValue.Value <<= aViewPoint;
+ rGeometryItem.SetPropertyValue( sExtrusion, aPropValue );
+
+
+ EnhancedCustomShapeParameterPair aOriginPropPair;
+ aOriginPropPair.First.Value <<= fOriginX;
+ aOriginPropPair.First.Type = EnhancedCustomShapeParameterType::NORMAL;
+ aOriginPropPair.Second.Value <<= fOriginY;
+ aOriginPropPair.Second.Type = EnhancedCustomShapeParameterType::NORMAL;
+ aPropValue.Name = "Origin";
+ aPropValue.Value <<= aOriginPropPair;
+ rGeometryItem.SetPropertyValue( sExtrusion, aPropValue );
+
+ EnhancedCustomShapeParameterPair aSkewPropPair;
+ aSkewPropPair.First.Value <<= fSkew;
+ aSkewPropPair.First.Type = EnhancedCustomShapeParameterType::NORMAL;
+ aSkewPropPair.Second.Value <<= fSkewAngle;
+ aSkewPropPair.Second.Type = EnhancedCustomShapeParameterType::NORMAL;
+ aPropValue.Name = "Skew";
+ aPropValue.Value <<= aSkewPropPair;
+ rGeometryItem.SetPropertyValue( sExtrusion, aPropValue );
+ }
+ }
+ break;
+ case SID_EXTRUSION_PROJECTION:
+ {
+ if( rReq.GetArgs() && rReq.GetArgs()->GetItemState( SID_EXTRUSION_PROJECTION ) == SfxItemState::SET )
+ {
+ sal_Int32 nProjection = rReq.GetArgs()->GetItem<SfxInt32Item>(SID_EXTRUSION_PROJECTION)->GetValue();
+ ProjectionMode eProjectionMode = nProjection == 1 ? ProjectionMode_PARALLEL : ProjectionMode_PERSPECTIVE;
+ css::beans::PropertyValue aPropValue;
+ aPropValue.Name = "ProjectionMode";
+ aPropValue.Value <<= eProjectionMode;
+ rGeometryItem.SetPropertyValue( sExtrusion, aPropValue );
+ }
+ }
+ break;
+ case SID_EXTRUSION_DEPTH:
+ {
+ if( rReq.GetArgs() && rReq.GetArgs()->GetItemState( SID_EXTRUSION_DEPTH ) == SfxItemState::SET)
+ {
+ double fDepth = rReq.GetArgs()->GetItem<SvxDoubleItem>(SID_EXTRUSION_DEPTH)->GetValue();
+ EnhancedCustomShapeParameterPair aDepthPropPair;
+ aDepthPropPair.First.Value <<= fDepth;
+ aDepthPropPair.First.Type = EnhancedCustomShapeParameterType::NORMAL;
+ aDepthPropPair.Second.Value <<= 0.0; // fraction
+ aDepthPropPair.Second.Type = EnhancedCustomShapeParameterType::NORMAL;
+
+ css::beans::PropertyValue aPropValue;
+ aPropValue.Name = "Depth";
+ aPropValue.Value <<= aDepthPropPair;
+ rGeometryItem.SetPropertyValue( sExtrusion, aPropValue );
+ }
+ }
+ break;
+ case SID_EXTRUSION_3D_COLOR:
+ {
+ if( rReq.GetArgs() && rReq.GetArgs()->GetItemState( SID_EXTRUSION_3D_COLOR ) == SfxItemState::SET)
+ {
+ Color aColor( static_cast<const SvxColorItem&>(rReq.GetArgs()->Get(SID_EXTRUSION_3D_COLOR)).GetValue() );
+
+ const bool bAuto = aColor == COL_AUTO;
+
+ css::beans::PropertyValue aPropValue;
+ aPropValue.Name = "Color";
+ aPropValue.Value <<= !bAuto;
+ rGeometryItem.SetPropertyValue( sExtrusion, aPropValue );
+
+ if( bAuto )
+ {
+ pObj->ClearMergedItem( XATTR_SECONDARYFILLCOLOR );
+ }
+ else
+ {
+ pObj->SetMergedItem( XSecondaryFillColorItem( "", aColor ) );
+ }
+ pObj->BroadcastObjectChange();
+ }
+ }
+ break;
+ case SID_EXTRUSION_SURFACE:
+ {
+ if( rReq.GetArgs() && rReq.GetArgs()->GetItemState( SID_EXTRUSION_SURFACE ) == SfxItemState::SET)
+ {
+ sal_Int32 nSurface = rReq.GetArgs()->GetItem<SfxInt32Item>(SID_EXTRUSION_SURFACE)->GetValue();
+
+ // Set ShadeMode only when changing from or to wireframe, otherwise keep existing value.
+ ShadeMode eOldShadeMode(ShadeMode_FLAT);
+ css::uno::Any* pAny = rGeometryItem.GetPropertyValueByName(sExtrusion, u"ShadeMode");
+ if (pAny)
+ *pAny >>= eOldShadeMode;
+ ShadeMode eShadeMode(eOldShadeMode);
+ switch (nSurface)
+ {
+ case 0: // wireframe
+ eShadeMode = ShadeMode_DRAFT;
+ break;
+ case 1: // matte
+ case 2: // plastic
+ case 3: // metal ODF
+ case 4: // metal MS Office
+ if (eOldShadeMode == ShadeMode_DRAFT)
+ eShadeMode = ShadeMode_FLAT; // ODF default
+ break;
+ }
+
+ // ODF has no dedicated property for 'surface'. MS Office binary format uses attribute
+ // c3DSpecularAmt to distinguish between 'matte' (=0) and 'plastic'.
+ // We do the same.
+ double fOldSpecularity = 0.0;
+ pAny = rGeometryItem.GetPropertyValueByName(sExtrusion, u"Specularity");
+ if (pAny)
+ *pAny >>= fOldSpecularity;
+ double fSpecularity = fOldSpecularity;
+ switch( nSurface )
+ {
+ case 0: // wireframe
+ break;
+ case 1: // matte
+ fSpecularity = 0.0;
+ break;
+ case 2: // plastic
+ case 3: // metal ODF
+ case 4: // metal MS Office
+ if (basegfx::fTools::equalZero(fOldSpecularity, 0.0001))
+ // MS Office uses 80000/65536. That is currently not allowed in ODF.
+ // But the ODF error will be caught in xmloff.
+ fSpecularity = 80000.0 / 655.36; // interpreted as %
+ break;
+ }
+
+ // MS Office binary format uses attribute c3DDiffuseAmt with value =43712 (Fixed 16.16) in
+ // addition to the 'metal' flag. For other surface kinds default = 65536 is used.
+ // We toggle between 100 and 43712.0 / 655.36 here, to get better ODF -> MSO binary.
+ // We keep other values, those might be set outside regular UI, e.g by macro.
+ double fOldDiffusion = 100.0;
+ pAny = rGeometryItem.GetPropertyValueByName(sExtrusion, u"Diffusion");
+ if (pAny)
+ *pAny >>= fOldDiffusion;
+ double fDiffusion = fOldDiffusion;
+ if (nSurface == 4)
+ {
+ if (fOldDiffusion == 100.0)
+ fDiffusion = 43712.0 / 655.36; // interpreted as %
+ }
+ else
+ {
+ if (basegfx::fTools::equalZero(fOldDiffusion - 43712.0 / 655.36, 0.0001))
+ fDiffusion = 100.0;
+ }
+
+ css::beans::PropertyValue aPropValue;
+ aPropValue.Name = "ShadeMode";
+ aPropValue.Value <<= eShadeMode;
+ rGeometryItem.SetPropertyValue( sExtrusion, aPropValue );
+
+ aPropValue.Name = "Metal";
+ aPropValue.Value <<= nSurface == 3 || nSurface == 4;
+ rGeometryItem.SetPropertyValue(sExtrusion, aPropValue);
+
+ if (nSurface == 3 || nSurface == 4)
+ {
+ aPropValue.Name = "MetalType";
+ aPropValue.Value <<= nSurface == 4
+ ? EnhancedCustomShapeMetalType::MetalMSCompatible
+ : EnhancedCustomShapeMetalType::MetalODF;
+ rGeometryItem.SetPropertyValue(sExtrusion, aPropValue);
+ }
+
+ if (!basegfx::fTools::equalZero(fOldSpecularity - fSpecularity, 0.0001))
+ {
+ aPropValue.Name = "Specularity";
+ aPropValue.Value <<= fSpecularity;
+ rGeometryItem.SetPropertyValue(sExtrusion, aPropValue);
+ }
+
+ if (!basegfx::fTools::equalZero(fOldDiffusion - fDiffusion, 0.0001))
+ {
+ aPropValue.Name = "Diffusion";
+ aPropValue.Value <<= fDiffusion;
+ rGeometryItem.SetPropertyValue(sExtrusion, aPropValue);
+ }
+ }
+ }
+ break;
+ case SID_EXTRUSION_LIGHTING_INTENSITY:
+ {
+ if( rReq.GetArgs() && rReq.GetArgs()->GetItemState( SID_EXTRUSION_LIGHTING_INTENSITY ) == SfxItemState::SET)
+ {
+ sal_Int32 nLevel = rReq.GetArgs()->GetItem<SfxInt32Item>(SID_EXTRUSION_LIGHTING_INTENSITY)->GetValue();
+
+ double fBrightness; // c3DAmbientIntensity in MS Office
+ double fLevel1; // c3DKeyIntensity in MS Office
+ double fLevel2; // c3DFillIntensity in MS Office
+
+ // ToDo: "bright" values are different from MS Office. Should they be kept?
+ switch( nLevel )
+ {
+ case 0: // bright
+ fBrightness = 33.0; // ODF default.
+ fLevel1 = 66.0; // ODF default
+ fLevel2 = 66.0; // ODF default
+ break;
+ case 1: // normal
+ fBrightness = 15.0;
+ fLevel1 = 67.0;
+ fLevel2 = 37.0;
+ break;
+ case 2: // dim
+ fBrightness = 6.0;
+ fLevel1 = 79.0;
+ fLevel2 = 21.0;
+ break;
+ }
+
+ css::beans::PropertyValue aPropValue;
+ aPropValue.Name = "Brightness";
+ aPropValue.Value <<= fBrightness;
+ rGeometryItem.SetPropertyValue( sExtrusion, aPropValue );
+
+ aPropValue.Name = "FirstLightLevel";
+ aPropValue.Value <<= fLevel1;
+ rGeometryItem.SetPropertyValue( sExtrusion, aPropValue );
+
+ aPropValue.Name = "SecondLightLevel";
+ aPropValue.Value <<= fLevel2;
+ rGeometryItem.SetPropertyValue( sExtrusion, aPropValue );
+
+ // If a user sets light preset 'Dim' in MS Office, MS Office sets second light to harsh.
+ // In other cases it is soft.
+ aPropValue.Name = "SecondLightHarsh";
+ aPropValue.Value <<= nLevel == 2;
+ rGeometryItem.SetPropertyValue(sExtrusion, aPropValue);
+ }
+ }
+ break;
+ case SID_EXTRUSION_LIGHTING_DIRECTION:
+ {
+ if( rReq.GetArgs() && rReq.GetArgs()->GetItemState( SID_EXTRUSION_LIGHTING_DIRECTION ) == SfxItemState::SET)
+ {
+ sal_Int32 nDirection = rReq.GetArgs()->GetItem<SfxInt32Item>(SID_EXTRUSION_LIGHTING_DIRECTION)->GetValue();
+
+ if((nDirection >= 0) && (nDirection < 9))
+ {
+ const Direction3D * pLighting1Defaults;
+ const Direction3D * pLighting2Defaults;
+
+ getLightingDirectionDefaults( &pLighting1Defaults, &pLighting2Defaults );
+
+ css::beans::PropertyValue aPropValue;
+ aPropValue.Name = "FirstLightDirection";
+ aPropValue.Value <<= pLighting1Defaults[nDirection];
+ rGeometryItem.SetPropertyValue( sExtrusion, aPropValue );
+
+ aPropValue.Name = "SecondLightDirection";
+ aPropValue.Value <<= pLighting2Defaults[nDirection];
+ rGeometryItem.SetPropertyValue( sExtrusion, aPropValue );
+ }
+ }
+ }
+ break;
+
+ }
+}
+
+void ExtrusionBar::execute( SdrView* pSdrView, SfxRequest const & rReq, SfxBindings& rBindings )
+{
+ sal_uInt16 nSID = rReq.GetSlot();
+ TranslateId pStrResId;
+
+ const bool bUndo = pSdrView && pSdrView->IsUndoEnabled();
+
+ switch( nSID )
+ {
+ case SID_EXTRUSION_TOGGLE:
+ {
+ if ( !pStrResId )
+ pStrResId = RID_SVXSTR_UNDO_APPLY_EXTRUSION_ON_OFF;
+ [[fallthrough]];
+ }
+ case SID_EXTRUSION_TILT_DOWN:
+ {
+ if ( !pStrResId )
+ pStrResId = RID_SVXSTR_UNDO_APPLY_EXTRUSION_ROTATE_DOWN;
+ [[fallthrough]];
+ }
+ case SID_EXTRUSION_TILT_UP:
+ {
+ if ( !pStrResId )
+ pStrResId = RID_SVXSTR_UNDO_APPLY_EXTRUSION_ROTATE_UP;
+ [[fallthrough]];
+ }
+ case SID_EXTRUSION_TILT_LEFT:
+ {
+ if ( !pStrResId )
+ pStrResId = RID_SVXSTR_UNDO_APPLY_EXTRUSION_ROTATE_LEFT;
+ [[fallthrough]];
+ }
+ case SID_EXTRUSION_TILT_RIGHT:
+ {
+ if ( !pStrResId )
+ pStrResId = RID_SVXSTR_UNDO_APPLY_EXTRUSION_ROTATE_RIGHT;
+ [[fallthrough]];
+ }
+ case SID_EXTRUSION_DIRECTION:
+ {
+ if ( !pStrResId )
+ pStrResId = RID_SVXSTR_UNDO_APPLY_EXTRUSION_ORIENTATION;
+ [[fallthrough]];
+ }
+ case SID_EXTRUSION_PROJECTION:
+ {
+ if ( !pStrResId )
+ pStrResId = RID_SVXSTR_UNDO_APPLY_EXTRUSION_PROJECTION;
+ [[fallthrough]];
+ }
+ case SID_EXTRUSION_DEPTH:
+ {
+ if ( !pStrResId )
+ pStrResId = RID_SVXSTR_UNDO_APPLY_EXTRUSION_DEPTH;
+ [[fallthrough]];
+ }
+ case SID_EXTRUSION_3D_COLOR:
+ {
+ if ( !pStrResId )
+ pStrResId = RID_SVXSTR_UNDO_APPLY_EXTRUSION_COLOR;
+ [[fallthrough]];
+ }
+ case SID_EXTRUSION_SURFACE:
+ {
+ if ( !pStrResId )
+ pStrResId = RID_SVXSTR_UNDO_APPLY_EXTRUSION_SURFACE;
+ [[fallthrough]];
+ }
+ case SID_EXTRUSION_LIGHTING_INTENSITY:
+ {
+ if ( !pStrResId )
+ pStrResId = RID_SVXSTR_UNDO_APPLY_EXTRUSION_BRIGHTNESS;
+ [[fallthrough]];
+ }
+ case SID_EXTRUSION_LIGHTING_DIRECTION:
+ {
+ if ( !pStrResId )
+ pStrResId = RID_SVXSTR_UNDO_APPLY_EXTRUSION_LIGHTING;
+
+ if (pSdrView)
+ {
+ const SdrMarkList& rMarkList = pSdrView->GetMarkedObjectList();
+ const size_t nCount = rMarkList.GetMarkCount();
+
+ for(size_t i=0; i<nCount; ++i)
+ {
+ SdrObject* pObj = rMarkList.GetMark(i)->GetMarkedSdrObj();
+ if( dynamic_cast<const SdrObjCustomShape*>( pObj) != nullptr )
+ {
+ if( bUndo )
+ {
+ OUString aStr( SvxResId( pStrResId ) );
+ pSdrView->BegUndo( aStr );
+ pSdrView->AddUndo( pSdrView->GetModel()->GetSdrUndoFactory().CreateUndoAttrObject( *pObj ) );
+ }
+ SdrCustomShapeGeometryItem aGeometryItem( pObj->GetMergedItem( SDRATTR_CUSTOMSHAPE_GEOMETRY ) );
+ impl_execute( rReq, aGeometryItem, pObj );
+ pObj->SetMergedItem( aGeometryItem );
+ pObj->BroadcastObjectChange();
+ if( bUndo )
+ pSdrView->EndUndo();
+
+ // simulate a context change:
+ // force SelectionHasChanged() being called
+ // so that extrusion bar will be visible/hidden
+ pSdrView->MarkListHasChanged();
+ }
+ }
+ }
+ }
+ break;
+
+ case SID_EXTRUSION_DEPTH_DIALOG:
+ if( rReq.GetArgs() &&
+ (rReq.GetArgs()->GetItemState( SID_EXTRUSION_DEPTH ) == SfxItemState::SET) &&
+ (rReq.GetArgs()->GetItemState( SID_ATTR_METRIC ) == SfxItemState::SET))
+ {
+ double fDepth = rReq.GetArgs()->GetItem<SvxDoubleItem>(SID_EXTRUSION_DEPTH)->GetValue();
+ FieldUnit eUnit = static_cast<FieldUnit>(rReq.GetArgs()->GetItem<SfxUInt16Item>(SID_ATTR_METRIC)->GetValue());
+
+ ExtrusionDepthDialog aDlg(rReq.GetFrameWeld(), fDepth, eUnit);
+ sal_uInt16 nRet = aDlg.run();
+ if (nRet == RET_OK)
+ {
+ fDepth = aDlg.getDepth();
+
+ SvxDoubleItem aItem( fDepth, SID_EXTRUSION_DEPTH );
+ SfxPoolItem* aItems[] = { &aItem, nullptr };
+ rBindings.Execute( SID_EXTRUSION_DEPTH, const_cast<const SfxPoolItem**>(aItems) );
+ }
+ }
+ break;
+ }
+
+ if( nSID != SID_EXTRUSION_TOGGLE )
+ return;
+
+ static const sal_uInt16 SidArray[] = {
+ SID_EXTRUSION_TILT_DOWN,
+ SID_EXTRUSION_TILT_UP,
+ SID_EXTRUSION_TILT_LEFT,
+ SID_EXTRUSION_TILT_RIGHT,
+ SID_EXTRUSION_DEPTH_FLOATER,
+ SID_EXTRUSION_DIRECTION_FLOATER,
+ SID_EXTRUSION_LIGHTING_FLOATER,
+ SID_EXTRUSION_SURFACE_FLOATER,
+ SID_EXTRUSION_3D_COLOR,
+ SID_EXTRUSION_DEPTH,
+ SID_EXTRUSION_DIRECTION,
+ SID_EXTRUSION_PROJECTION,
+ SID_EXTRUSION_LIGHTING_DIRECTION,
+ SID_EXTRUSION_LIGHTING_INTENSITY,
+ SID_EXTRUSION_SURFACE,
+ 0 };
+
+ rBindings.Invalidate( SidArray );
+}
+
+static void getExtrusionDirectionState( SdrView const * pSdrView, SfxItemSet& rSet )
+{
+ const SdrMarkList& rMarkList = pSdrView->GetMarkedObjectList();
+ const size_t nCount = rMarkList.GetMarkCount();
+
+ static constexpr OUStringLiteral sExtrusion = u"Extrusion";
+
+ const css::uno::Any* pAny;
+
+ double fFinalSkewAngle = -1;
+ bool bHasCustomShape = false;
+
+ for(size_t i=0; i<nCount; ++i)
+ {
+ SdrObject* pObj = rMarkList.GetMark(i)->GetMarkedSdrObj();
+ if( dynamic_cast<const SdrObjCustomShape*>( pObj) != nullptr )
+ {
+ const SdrCustomShapeGeometryItem & rGeometryItem( pObj->GetMergedItem( SDRATTR_CUSTOMSHAPE_GEOMETRY ) );
+
+ // see if this is an extruded customshape
+ if( !bHasCustomShape )
+ {
+ const Any* pAny_ = rGeometryItem.GetPropertyValueByName( sExtrusion, sExtrusion );
+ if( pAny_ )
+ *pAny_ >>= bHasCustomShape;
+
+ if( !bHasCustomShape )
+ continue;
+ }
+
+ bool bParallel = true;
+ Position3D aViewPoint( 3472, -3472, 25000 ); // MSO default
+ double fSkewAngle = -135; // MSO default
+
+ pAny = rGeometryItem.GetPropertyValueByName( sExtrusion, "ProjectionMode" );
+ sal_Int16 nProjectionMode = sal_Int16();
+ if( pAny && ( *pAny >>= nProjectionMode ) )
+ bParallel = static_cast<ProjectionMode>(nProjectionMode) == ProjectionMode_PARALLEL;
+
+ if( bParallel )
+ {
+ double fSkew = 50.0;
+ EnhancedCustomShapeParameterPair aSkewPropPair;
+ pAny = rGeometryItem.GetPropertyValueByName( sExtrusion, "Skew" );
+ if( pAny && ( *pAny >>= aSkewPropPair ) )
+ {
+ aSkewPropPair.First.Value >>= fSkew;
+ aSkewPropPair.Second.Value >>= fSkewAngle;
+ }
+ if ( fSkew == 0.0 )
+ fSkewAngle = 0.0;
+ else if ( fSkewAngle == 0.0 )
+ fSkewAngle = -360.0;
+ }
+ else
+ {
+ double fOriginX = 0.50;
+ double fOriginY = -0.50;
+ pAny = rGeometryItem.GetPropertyValueByName( sExtrusion, "ViewPoint" );
+ if( pAny )
+ *pAny >>= aViewPoint;
+
+ EnhancedCustomShapeParameterPair aOriginPropPair;
+ pAny = rGeometryItem.GetPropertyValueByName( sExtrusion, "Origin" );
+ if( pAny && ( *pAny >>= aOriginPropPair ) )
+ {
+ aOriginPropPair.First.Value >>= fOriginX;
+ aOriginPropPair.Second.Value >>= fOriginY;
+ }
+ fSkewAngle = -1;
+ const double e = 0.0001;
+ if( aViewPoint.PositionX > e )
+ {
+ if( aViewPoint.PositionY > e )
+ {
+ if( (fOriginX > e ) && ( fOriginY > e ) )
+ fSkewAngle = 135.0;
+ }
+ else if( aViewPoint.PositionY < -e )
+ {
+ if( ( fOriginX > e ) && ( fOriginY < -e ) )
+ fSkewAngle = -135.0;
+ }
+ else
+ {
+ if( ( fOriginX > e ) && ( fOriginY > -e ) && ( fOriginY < e ) )
+ fSkewAngle = 180.0;
+ }
+ }
+ else if( aViewPoint.PositionX < -e )
+ {
+ if( aViewPoint.PositionY < -e )
+ {
+ if( ( fOriginX < -e ) && ( fOriginY < -e ) )
+ fSkewAngle = -45.0;
+ }
+ else if( aViewPoint.PositionY > e )
+ {
+ if( ( fOriginX < -e ) && ( fOriginY > e ) )
+ fSkewAngle = 45.0;
+ }
+ else
+ {
+ if( ( fOriginX < e ) && ( fOriginY > -e ) && ( fOriginY < e ) )
+ fSkewAngle = -360.0;
+ }
+ }
+ else
+ {
+ if( aViewPoint.PositionY < -e )
+ {
+ if( ( fOriginX > -e ) && ( fOriginX < e ) && ( fOriginY < -e ) )
+ fSkewAngle = -90.0;
+ }
+ else if( aViewPoint.PositionY > e )
+ {
+ if( ( fOriginX > -e ) && ( fOriginX < e ) && ( fOriginY > e ) )
+ fSkewAngle = 90.0;
+ }
+ else
+ {
+ if( ( fOriginX > -e ) && ( fOriginX < e ) && ( fOriginY > -e ) && ( fOriginY < e ) )
+ fSkewAngle = 0.0;
+ }
+ }
+ }
+
+ if( rtl::math::approxEqual(fFinalSkewAngle, -1.0) )
+ {
+ fFinalSkewAngle = fSkewAngle;
+ }
+ else if( !rtl::math::approxEqual(fSkewAngle, fFinalSkewAngle) )
+ {
+ fFinalSkewAngle = -1.0;
+ }
+
+ if( rtl::math::approxEqual(fFinalSkewAngle, -1.0) )
+ break;
+ }
+ }
+
+ if( bHasCustomShape )
+ rSet.Put( SfxInt32Item( SID_EXTRUSION_DIRECTION, static_cast<sal_Int32>(fFinalSkewAngle) ) );
+ else
+ rSet.DisableItem( SID_EXTRUSION_DIRECTION );
+}
+
+static void getExtrusionProjectionState( SdrView const * pSdrView, SfxItemSet& rSet )
+{
+ const SdrMarkList& rMarkList = pSdrView->GetMarkedObjectList();
+ const size_t nCount = rMarkList.GetMarkCount();
+
+ static constexpr OUStringLiteral sExtrusion = u"Extrusion";
+
+ const css::uno::Any* pAny;
+
+ sal_Int32 nFinalProjection = -1;
+ bool bHasCustomShape = false;
+
+ for(size_t i=0; i<nCount; ++i)
+ {
+ SdrObject* pObj = rMarkList.GetMark(i)->GetMarkedSdrObj();
+ if( dynamic_cast<const SdrObjCustomShape*>( pObj) != nullptr )
+ {
+ // see if this is an extruded customshape
+ if( !bHasCustomShape )
+ {
+ const SdrCustomShapeGeometryItem & rGeometryItem( pObj->GetMergedItem( SDRATTR_CUSTOMSHAPE_GEOMETRY ) );
+ const Any* pAny_ = rGeometryItem.GetPropertyValueByName( sExtrusion, sExtrusion );
+ if( pAny_ )
+ *pAny_ >>= bHasCustomShape;
+
+ if( !bHasCustomShape )
+ continue;
+ }
+
+ const SdrCustomShapeGeometryItem & rGeometryItem( pObj->GetMergedItem( SDRATTR_CUSTOMSHAPE_GEOMETRY ) );
+
+ bool bParallel = true;
+ pAny = rGeometryItem.GetPropertyValueByName( sExtrusion, "ProjectionMode" );
+ ProjectionMode eProjectionMode;
+ if( pAny && ( *pAny >>= eProjectionMode ) )
+ bParallel = eProjectionMode == ProjectionMode_PARALLEL;
+
+ if( nFinalProjection == -1 )
+ {
+ nFinalProjection = bParallel ? 1 : 0;
+ }
+ else if( nFinalProjection != (bParallel ? 1 : 0) )
+ {
+ nFinalProjection = -1;
+ break;
+ }
+ }
+ }
+
+ if( bHasCustomShape )
+ rSet.Put( SfxInt32Item( SID_EXTRUSION_PROJECTION, nFinalProjection ) );
+ else
+ rSet.DisableItem( SID_EXTRUSION_PROJECTION );
+}
+
+static void getExtrusionSurfaceState( SdrView const * pSdrView, SfxItemSet& rSet )
+{
+ const SdrMarkList& rMarkList = pSdrView->GetMarkedObjectList();
+ const size_t nCount = rMarkList.GetMarkCount();
+
+ static constexpr OUStringLiteral sExtrusion = u"Extrusion";
+
+ const css::uno::Any* pAny;
+
+ sal_Int32 nFinalSurface = -1;
+ bool bHasCustomShape = false;
+
+ for(size_t i=0; i<nCount; ++i)
+ {
+ SdrObject* pObj = rMarkList.GetMark(i)->GetMarkedSdrObj();
+ if( dynamic_cast<const SdrObjCustomShape*>( pObj) != nullptr )
+ {
+ const SdrCustomShapeGeometryItem & rGeometryItem( pObj->GetMergedItem( SDRATTR_CUSTOMSHAPE_GEOMETRY ) );
+
+ // see if this is an extruded customshape
+ if( !bHasCustomShape )
+ {
+ const Any* pAny_ = rGeometryItem.GetPropertyValueByName( sExtrusion, sExtrusion );
+ if( pAny_ )
+ *pAny_ >>= bHasCustomShape;
+
+ if( !bHasCustomShape )
+ continue;
+ }
+
+ sal_Int32 nSurface = 0; // wire frame
+
+ ShadeMode eShadeMode( ShadeMode_FLAT );
+ pAny = rGeometryItem.GetPropertyValueByName( sExtrusion, u"ShadeMode" );
+ if( pAny )
+ *pAny >>= eShadeMode;
+
+ if (eShadeMode != ShadeMode_DRAFT)
+ {
+ bool bMetal = false;
+ pAny = rGeometryItem.GetPropertyValueByName( sExtrusion, u"Metal" );
+ if( pAny )
+ *pAny >>= bMetal;
+
+ if( bMetal )
+ {
+ nSurface = 3; // metal ODF
+ sal_Int16 eMetalType = EnhancedCustomShapeMetalType::MetalODF;
+ pAny = rGeometryItem.GetPropertyValueByName( sExtrusion, u"MetalType" );
+ if (pAny)
+ {
+ *pAny >>= eMetalType;
+ if (eMetalType == EnhancedCustomShapeMetalType::MetalMSCompatible)
+ nSurface = 4; // metal MS Office
+ }
+ }
+ else
+ {
+ double fSpecularity = 0;
+ pAny = rGeometryItem.GetPropertyValueByName( sExtrusion, u"Specularity" );
+ if( pAny )
+ *pAny >>= fSpecularity;
+
+ const double e = 0.0001;
+ if( (fSpecularity > -e) && (fSpecularity < e) )
+ {
+ nSurface = 1; // matte
+ }
+ else
+ {
+ nSurface = 2; // plastic
+ }
+ }
+ }
+
+ if( nFinalSurface == -1 )
+ {
+ nFinalSurface = nSurface;
+ }
+ else if( nFinalSurface != nSurface )
+ {
+ nFinalSurface = -1;
+ break;
+ }
+ }
+ }
+
+ if( bHasCustomShape )
+ rSet.Put( SfxInt32Item( SID_EXTRUSION_SURFACE, nFinalSurface ) );
+ else
+ rSet.DisableItem( SID_EXTRUSION_SURFACE );
+}
+
+static void getExtrusionDepthState( SdrView const * pSdrView, SfxItemSet& rSet )
+{
+ const SdrMarkList& rMarkList = pSdrView->GetMarkedObjectList();
+ const size_t nCount = rMarkList.GetMarkCount();
+
+ static constexpr OUStringLiteral sExtrusion = u"Extrusion";
+
+ const css::uno::Any* pAny;
+
+ double fFinalDepth = -1;
+ bool bHasCustomShape = false;
+
+ for(size_t i=0; i<nCount; ++i)
+ {
+ SdrObject* pObj = rMarkList.GetMark(i)->GetMarkedSdrObj();
+ if( dynamic_cast<const SdrObjCustomShape*>( pObj) != nullptr )
+ {
+ const SdrCustomShapeGeometryItem & rGeometryItem( pObj->GetMergedItem( SDRATTR_CUSTOMSHAPE_GEOMETRY ) );
+
+ // see if this is an extruded customshape
+ if( !bHasCustomShape )
+ {
+ const Any* pAny_ = rGeometryItem.GetPropertyValueByName( sExtrusion, sExtrusion );
+ if( pAny_ )
+ *pAny_ >>= bHasCustomShape;
+
+ if( !bHasCustomShape )
+ continue;
+ }
+
+ double fDepth = 1270.0; // =36pt ODF default
+ pAny = rGeometryItem.GetPropertyValueByName( sExtrusion, "Depth" );
+ if( pAny )
+ {
+ EnhancedCustomShapeParameterPair aDepthPropPair;
+ if ( *pAny >>= aDepthPropPair )
+ aDepthPropPair.First.Value >>= fDepth;
+ }
+
+ if( fFinalDepth == -1 )
+ {
+ fFinalDepth = fDepth;
+ }
+ else if( !rtl::math::approxEqual(fFinalDepth, fDepth) )
+ {
+ fFinalDepth = -1;
+ break;
+ }
+ }
+ }
+
+ if( pSdrView->GetModel() )
+ {
+ FieldUnit eUnit = pSdrView->GetModel()->GetUIUnit();
+ rSet.Put( SfxUInt16Item( SID_ATTR_METRIC, static_cast<sal_uInt16>(eUnit) ) );
+ }
+
+ if( bHasCustomShape )
+ rSet.Put( SvxDoubleItem( fFinalDepth, SID_EXTRUSION_DEPTH ) );
+ else
+ rSet.DisableItem( SID_EXTRUSION_DEPTH );
+}
+
+static bool compare_direction( const Direction3D& d1, const Direction3D& d2 )
+{
+ if( ((d1.DirectionX < 0) && (d2.DirectionX < 0)) || ((d1.DirectionX == 0) && (d2.DirectionX == 0)) || ((d1.DirectionX > 0) && (d2.DirectionX > 0)) )
+ {
+ if( ((d1.DirectionY < 0) && (d2.DirectionY < 0)) || ((d1.DirectionY == 0) && (d2.DirectionY == 0)) || ((d1.DirectionY > 0) && (d2.DirectionY > 0)) )
+ {
+ if( ((d1.DirectionZ < 0) && (d2.DirectionZ < 0)) || ((d1.DirectionZ == 0) && (d2.DirectionZ == 0)) || ((d1.DirectionZ > 0) && (d2.DirectionZ > 0)) )
+ {
+ return true;
+ }
+ }
+ }
+
+ return false;
+}
+
+static void getExtrusionLightingDirectionState( SdrView const * pSdrView, SfxItemSet& rSet )
+{
+ const SdrMarkList& rMarkList = pSdrView->GetMarkedObjectList();
+ const size_t nCount = rMarkList.GetMarkCount();
+
+ static constexpr OUStringLiteral sExtrusion = u"Extrusion";
+
+ const Direction3D * pLighting1Defaults;
+ const Direction3D * pLighting2Defaults;
+
+ getLightingDirectionDefaults( &pLighting1Defaults, &pLighting2Defaults );
+
+ const css::uno::Any* pAny;
+
+ int nFinalDirection = -1;
+ bool bHasCustomShape = false;
+
+ for(size_t i=0; i<nCount; ++i)
+ {
+ SdrObject* pObj = rMarkList.GetMark(i)->GetMarkedSdrObj();
+ if( dynamic_cast<const SdrObjCustomShape*>( pObj) != nullptr )
+ {
+ const SdrCustomShapeGeometryItem & rGeometryItem( pObj->GetMergedItem( SDRATTR_CUSTOMSHAPE_GEOMETRY ) );
+
+ // see if this is an extruded customshape
+ if( !bHasCustomShape )
+ {
+ const Any* pAny_ = rGeometryItem.GetPropertyValueByName( sExtrusion, sExtrusion );
+ if( pAny_ )
+ *pAny_ >>= bHasCustomShape;
+
+ if( !bHasCustomShape )
+ continue;
+ }
+
+ Direction3D aFirstLightDirection( 50000, 0, 10000 );
+ Direction3D aSecondLightDirection( -50000, 0, 10000 );
+
+ pAny = rGeometryItem.GetPropertyValueByName( sExtrusion, "FirstLightDirection" );
+ if( pAny )
+ *pAny >>= aFirstLightDirection;
+
+ pAny = rGeometryItem.GetPropertyValueByName( sExtrusion, "SecondLightDirection" );
+ if( pAny )
+ *pAny >>= aSecondLightDirection;
+
+ int nDirection = -1;
+
+ int j;
+ for( j = 0; j < 9; j++ )
+ {
+ if( compare_direction( aFirstLightDirection, pLighting1Defaults[j] ) &&
+ compare_direction( aSecondLightDirection, pLighting2Defaults[j] ))
+ {
+ nDirection = j;
+ break;
+ }
+ }
+
+ if( nFinalDirection == -1 )
+ {
+ nFinalDirection = nDirection;
+ }
+ else if( nDirection != nFinalDirection )
+ {
+ nFinalDirection = -1;
+ }
+
+ if( nFinalDirection == -1 )
+ break;
+ }
+ }
+
+ if( bHasCustomShape )
+ rSet.Put( SfxInt32Item( SID_EXTRUSION_LIGHTING_DIRECTION, static_cast<sal_Int32>(nFinalDirection) ) );
+ else
+ rSet.DisableItem( SID_EXTRUSION_LIGHTING_DIRECTION );
+}
+
+static void getExtrusionLightingIntensityState( SdrView const * pSdrView, SfxItemSet& rSet )
+{
+ const SdrMarkList& rMarkList = pSdrView->GetMarkedObjectList();
+ const size_t nCount = rMarkList.GetMarkCount();
+
+ static constexpr OUStringLiteral sExtrusion = u"Extrusion";
+
+ const css::uno::Any* pAny;
+
+ int nFinalLevel = -1;
+ bool bHasCustomShape = false;
+
+ for(size_t i=0; i<nCount; ++i)
+ {
+ SdrObject* pObj = rMarkList.GetMark(i)->GetMarkedSdrObj();
+ if( dynamic_cast<const SdrObjCustomShape*>( pObj) != nullptr )
+ {
+ const SdrCustomShapeGeometryItem & rGeometryItem( pObj->GetMergedItem( SDRATTR_CUSTOMSHAPE_GEOMETRY ) );
+
+ // see if this is an extruded customshape
+ if( !bHasCustomShape )
+ {
+ const Any* pAny_ = rGeometryItem.GetPropertyValueByName( sExtrusion, sExtrusion );
+ if( pAny_ )
+ *pAny_ >>= bHasCustomShape;
+
+ if( !bHasCustomShape )
+ continue;
+ }
+
+ double fBrightness = 22178.0 / 655.36;
+ pAny = rGeometryItem.GetPropertyValueByName( sExtrusion, "Brightness" );
+ if( pAny )
+ *pAny >>= fBrightness;
+
+ int nLevel;
+ if( fBrightness >= 30.0 )
+ {
+ nLevel = 0; // Bright
+ }
+ else if( fBrightness >= 10.0 )
+ {
+ nLevel = 1; // Normal;
+ }
+ else
+ {
+ nLevel = 2; // Dim
+ }
+
+ if( nFinalLevel == -1 )
+ {
+ nFinalLevel = nLevel;
+ }
+ else if( nFinalLevel != nLevel )
+ {
+ nFinalLevel = -1;
+ break;
+ }
+ }
+ }
+
+ if( bHasCustomShape )
+ rSet.Put( SfxInt32Item( SID_EXTRUSION_LIGHTING_INTENSITY, nFinalLevel ) );
+ else
+ rSet.DisableItem( SID_EXTRUSION_LIGHTING_INTENSITY );
+}
+
+static void getExtrusionColorState( SdrView const * pSdrView, SfxItemSet& rSet )
+{
+ const SdrMarkList& rMarkList = pSdrView->GetMarkedObjectList();
+ const size_t nCount = rMarkList.GetMarkCount();
+
+ static constexpr OUStringLiteral sExtrusion = u"Extrusion";
+
+ const css::uno::Any* pAny;
+
+ bool bInit = false;
+ bool bAmbigius = false;
+ Color aFinalColor;
+ bool bHasCustomShape = false;
+
+ for(size_t i=0; i<nCount; ++i)
+ {
+ SdrObject* pObj = rMarkList.GetMark(i)->GetMarkedSdrObj();
+ if( dynamic_cast<const SdrObjCustomShape*>( pObj) != nullptr )
+ {
+ const SdrCustomShapeGeometryItem & rGeometryItem( pObj->GetMergedItem( SDRATTR_CUSTOMSHAPE_GEOMETRY ) );
+
+ // see if this is an extruded customshape
+ if( !bHasCustomShape )
+ {
+ const Any* pAny_ = rGeometryItem.GetPropertyValueByName( sExtrusion, sExtrusion );
+ if( pAny_ )
+ *pAny_ >>= bHasCustomShape;
+
+ if( !bHasCustomShape )
+ continue;
+ }
+
+ Color aColor;
+
+ bool bUseColor = false;
+ pAny = rGeometryItem.GetPropertyValueByName( sExtrusion, "Color" );
+ if( pAny )
+ *pAny >>= bUseColor;
+
+ if( bUseColor )
+ {
+ const XSecondaryFillColorItem& rItem = pObj->GetMergedItem( XATTR_SECONDARYFILLCOLOR );
+ aColor = rItem.GetColorValue();
+ }
+ else
+ {
+ aColor = COL_AUTO;
+ }
+
+ if( !bInit )
+ {
+ aFinalColor = aColor;
+ bInit = true;
+ }
+ else if( aFinalColor != aColor )
+ {
+ bAmbigius = true;
+ break;
+ }
+ }
+ }
+
+ if( bAmbigius )
+ aFinalColor = COL_AUTO;
+
+ if( bHasCustomShape )
+ rSet.Put( SvxColorItem( aFinalColor, SID_EXTRUSION_3D_COLOR ) );
+ else
+ rSet.DisableItem( SID_EXTRUSION_3D_COLOR );
+}
+
+namespace svx {
+bool checkForSelectedCustomShapes( SdrView const * pSdrView, bool bOnlyExtruded )
+{
+ static constexpr OUStringLiteral sExtrusion = u"Extrusion";
+
+ const SdrMarkList& rMarkList = pSdrView->GetMarkedObjectList();
+ const size_t nCount = rMarkList.GetMarkCount();
+ bool bFound = false;
+
+ for(size_t i=0;(i<nCount) && !bFound ; ++i)
+ {
+ SdrObject* pObj = rMarkList.GetMark(i)->GetMarkedSdrObj();
+ if( dynamic_cast<const SdrObjCustomShape*>( pObj) != nullptr )
+ {
+ if( bOnlyExtruded )
+ {
+ const SdrCustomShapeGeometryItem & rGeometryItem( pObj->GetMergedItem( SDRATTR_CUSTOMSHAPE_GEOMETRY ) );
+ const Any* pAny = rGeometryItem.GetPropertyValueByName( sExtrusion, sExtrusion );
+ if( pAny )
+ *pAny >>= bFound;
+ }
+ else
+ {
+ bFound = true;
+ }
+ }
+ }
+
+ return bFound;
+}
+}
+
+void ExtrusionBar::getState( SdrView const * pSdrView, SfxItemSet& rSet )
+{
+ getExtrusionDirectionState( pSdrView, rSet );
+ getExtrusionProjectionState( pSdrView, rSet );
+
+ const bool bOnlyExtrudedCustomShapes(checkForSelectedCustomShapes( pSdrView, true ));
+
+ if (! bOnlyExtrudedCustomShapes)
+ {
+ rSet.DisableItem( SID_EXTRUSION_TILT_DOWN );
+ rSet.DisableItem( SID_EXTRUSION_TILT_DOWN );
+ rSet.DisableItem( SID_EXTRUSION_TILT_UP );
+ rSet.DisableItem( SID_EXTRUSION_TILT_LEFT );
+ rSet.DisableItem( SID_EXTRUSION_TILT_RIGHT );
+ rSet.DisableItem( SID_EXTRUSION_3D_COLOR );
+ rSet.DisableItem( SID_EXTRUSION_DEPTH_FLOATER );
+ rSet.DisableItem( SID_EXTRUSION_DIRECTION_FLOATER );
+ rSet.DisableItem( SID_EXTRUSION_LIGHTING_FLOATER );
+ rSet.DisableItem( SID_EXTRUSION_SURFACE_FLOATER );
+ }
+
+ if( !checkForSelectedCustomShapes( pSdrView, false ) )
+ rSet.DisableItem( SID_EXTRUSION_TOGGLE );
+
+ getExtrusionDepthState( pSdrView, rSet );
+ getExtrusionSurfaceState( pSdrView, rSet );
+ getExtrusionLightingIntensityState( pSdrView, rSet );
+ getExtrusionLightingDirectionState( pSdrView, rSet );
+ getExtrusionColorState( pSdrView, rSet );
+}
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */