From ed5640d8b587fbcfed7dd7967f3de04b37a76f26 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 11:06:44 +0200 Subject: Adding upstream version 4:7.4.7. Signed-off-by: Daniel Baumann --- .../source/processor2d/vclmetafileprocessor2d.cxx | 2571 ++++++++++++++++++++ 1 file changed, 2571 insertions(+) create mode 100644 drawinglayer/source/processor2d/vclmetafileprocessor2d.cxx (limited to 'drawinglayer/source/processor2d/vclmetafileprocessor2d.cxx') diff --git a/drawinglayer/source/processor2d/vclmetafileprocessor2d.cxx b/drawinglayer/source/processor2d/vclmetafileprocessor2d.cxx new file mode 100644 index 000000000..673fd093d --- /dev/null +++ b/drawinglayer/source/processor2d/vclmetafileprocessor2d.cxx @@ -0,0 +1,2571 @@ +/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ +/* + * This file is part of the LibreOffice project. + * + * This Source Code Form is subject to the terms of the Mozilla Public + * License, v. 2.0. If a copy of the MPL was not distributed with this + * file, You can obtain one at http://mozilla.org/MPL/2.0/. + * + * This file incorporates work covered by the following license notice: + * + * Licensed to the Apache Software Foundation (ASF) under one or more + * contributor license agreements. See the NOTICE file distributed + * with this work for additional information regarding copyright + * ownership. The ASF licenses this file to you under the Apache + * License, Version 2.0 (the "License"); you may not use this file + * except in compliance with the License. You may obtain a copy of + * the License at http://www.apache.org/licenses/LICENSE-2.0 . + */ + +#include +#include +#include "vclmetafileprocessor2d.hxx" +#include "vclpixelprocessor2d.hxx" +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include // for PDFExtOutDevData Graphic support +#include // for PDFExtOutDevData Graphic support +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include // for Title/Description metadata + +#include +#include +#include +#include +#include + +using namespace com::sun::star; + +// #112245# definition for maximum allowed point count due to Metafile target. +// To be on the safe side with the old tools polygon, use slightly less than +// the theoretical maximum (bad experiences with tools polygon) + +#define MAX_POLYGON_POINT_COUNT_METAFILE (0x0000fff0) + +namespace +{ +// #112245# helper to split line polygon in half +void splitLinePolygon(const basegfx::B2DPolygon& rBasePolygon, basegfx::B2DPolygon& o_aLeft, + basegfx::B2DPolygon& o_aRight) +{ + const sal_uInt32 nCount(rBasePolygon.count()); + + if (nCount) + { + const sal_uInt32 nHalfCount((nCount - 1) >> 1); + + o_aLeft = basegfx::B2DPolygon(rBasePolygon, 0, nHalfCount + 1); + o_aLeft.setClosed(false); + + o_aRight = basegfx::B2DPolygon(rBasePolygon, nHalfCount, nCount - nHalfCount); + o_aRight.setClosed(false); + + if (rBasePolygon.isClosed()) + { + o_aRight.append(rBasePolygon.getB2DPoint(0)); + + if (rBasePolygon.areControlPointsUsed()) + { + o_aRight.setControlPoints(o_aRight.count() - 1, rBasePolygon.getPrevControlPoint(0), + rBasePolygon.getNextControlPoint(0)); + } + } + } + else + { + o_aLeft.clear(); + o_aRight.clear(); + } +} + +// #112245# helper to evtl. split filled polygons to maximum metafile point count +void fillPolyPolygonNeededToBeSplit(basegfx::B2DPolyPolygon& rPolyPolygon) +{ + const sal_uInt32 nPolyCount(rPolyPolygon.count()); + + if (!nPolyCount) + return; + + basegfx::B2DPolyPolygon aSplitted; + + for (sal_uInt32 a(0); a < nPolyCount; a++) + { + const basegfx::B2DPolygon& aCandidate(rPolyPolygon.getB2DPolygon(a)); + const sal_uInt32 nPointCount(aCandidate.count()); + bool bNeedToSplit(false); + + if (aCandidate.areControlPointsUsed()) + { + // compare with the maximum for bezier curved polygons + bNeedToSplit = nPointCount > ((MAX_POLYGON_POINT_COUNT_METAFILE / 3L) - 1); + } + else + { + // compare with the maximum for simple point polygons + bNeedToSplit = nPointCount > (MAX_POLYGON_POINT_COUNT_METAFILE - 1); + } + + if (bNeedToSplit) + { + // need to split the partial polygon + const basegfx::B2DRange aRange(aCandidate.getB2DRange()); + const basegfx::B2DPoint aCenter(aRange.getCenter()); + + if (aRange.getWidth() > aRange.getHeight()) + { + // clip in left and right + const basegfx::B2DPolyPolygon aLeft(basegfx::utils::clipPolygonOnParallelAxis( + aCandidate, false, true, aCenter.getX(), false)); + const basegfx::B2DPolyPolygon aRight(basegfx::utils::clipPolygonOnParallelAxis( + aCandidate, false, false, aCenter.getX(), false)); + + aSplitted.append(aLeft); + aSplitted.append(aRight); + } + else + { + // clip in top and bottom + const basegfx::B2DPolyPolygon aTop(basegfx::utils::clipPolygonOnParallelAxis( + aCandidate, true, true, aCenter.getY(), false)); + const basegfx::B2DPolyPolygon aBottom(basegfx::utils::clipPolygonOnParallelAxis( + aCandidate, true, false, aCenter.getY(), false)); + + aSplitted.append(aTop); + aSplitted.append(aBottom); + } + } + else + { + aSplitted.append(aCandidate); + } + } + + if (aSplitted.count() != nPolyCount) + { + rPolyPolygon = aSplitted; + } +} + +/** Filter input polypolygon for effectively empty sub-fills + + Needed to fix fdo#37559 + + @param rPoly + tools::PolyPolygon to filter + + @return converted tools PolyPolygon, w/o one-point fills + */ +tools::PolyPolygon getFillPolyPolygon(const ::basegfx::B2DPolyPolygon& rPoly) +{ + // filter input rPoly + basegfx::B2DPolyPolygon aPoly; + sal_uInt32 nCount(rPoly.count()); + for (sal_uInt32 i = 0; i < nCount; ++i) + { + const basegfx::B2DPolygon& aCandidate(rPoly.getB2DPolygon(i)); + if (!aCandidate.isClosed() || aCandidate.count() > 1) + aPoly.append(aCandidate); + } + return tools::PolyPolygon(aPoly); +} + +} // end of anonymous namespace + +namespace drawinglayer::processor2d +{ +tools::Rectangle +VclMetafileProcessor2D::impDumpToMetaFile(const primitive2d::Primitive2DContainer& rContent, + GDIMetaFile& o_rContentMetafile) +{ + // Prepare VDev, MetaFile and connections + OutputDevice* pLastOutputDevice = mpOutputDevice; + GDIMetaFile* pLastMetafile = mpMetaFile; + basegfx::B2DRange aPrimitiveRange(rContent.getB2DRange(getViewInformation2D())); + + // transform primitive range with current transformation (e.g shadow offset) + aPrimitiveRange.transform(maCurrentTransformation); + + const tools::Rectangle aPrimitiveRectangle( + basegfx::fround(aPrimitiveRange.getMinX()), basegfx::fround(aPrimitiveRange.getMinY()), + basegfx::fround(aPrimitiveRange.getMaxX()), basegfx::fround(aPrimitiveRange.getMaxY())); + ScopedVclPtrInstance aContentVDev; + MapMode aNewMapMode(pLastOutputDevice->GetMapMode()); + + mpOutputDevice = aContentVDev.get(); + mpMetaFile = &o_rContentMetafile; + aContentVDev->EnableOutput(false); + aContentVDev->SetMapMode(pLastOutputDevice->GetMapMode()); + o_rContentMetafile.Record(aContentVDev.get()); + aContentVDev->SetLineColor(pLastOutputDevice->GetLineColor()); + aContentVDev->SetFillColor(pLastOutputDevice->GetFillColor()); + aContentVDev->SetFont(pLastOutputDevice->GetFont()); + aContentVDev->SetDrawMode(pLastOutputDevice->GetDrawMode()); + aContentVDev->SetSettings(pLastOutputDevice->GetSettings()); + aContentVDev->SetRefPoint(pLastOutputDevice->GetRefPoint()); + + // dump to MetaFile + process(rContent); + + // cleanups + o_rContentMetafile.Stop(); + o_rContentMetafile.WindStart(); + aNewMapMode.SetOrigin(aPrimitiveRectangle.TopLeft()); + o_rContentMetafile.SetPrefMapMode(aNewMapMode); + o_rContentMetafile.SetPrefSize(aPrimitiveRectangle.GetSize()); + mpOutputDevice = pLastOutputDevice; + mpMetaFile = pLastMetafile; + + return aPrimitiveRectangle; +} + +void VclMetafileProcessor2D::impConvertFillGradientAttributeToVCLGradient( + Gradient& o_rVCLGradient, const attribute::FillGradientAttribute& rFiGrAtt, + bool bIsTransparenceGradient) const +{ + if (bIsTransparenceGradient) + { + // it's about transparence channel intensities (black/white), do not use color modifier + o_rVCLGradient.SetStartColor(Color(rFiGrAtt.getStartColor())); + o_rVCLGradient.SetEndColor(Color(rFiGrAtt.getEndColor())); + } + else + { + // use color modifier to influence start/end color of gradient + o_rVCLGradient.SetStartColor( + Color(maBColorModifierStack.getModifiedColor(rFiGrAtt.getStartColor()))); + o_rVCLGradient.SetEndColor( + Color(maBColorModifierStack.getModifiedColor(rFiGrAtt.getEndColor()))); + } + + o_rVCLGradient.SetAngle( + Degree10(static_cast(basegfx::rad2deg<10>(rFiGrAtt.getAngle())))); + o_rVCLGradient.SetBorder(static_cast(rFiGrAtt.getBorder() * 100.0)); + o_rVCLGradient.SetOfsX(static_cast(rFiGrAtt.getOffsetX() * 100.0)); + o_rVCLGradient.SetOfsY(static_cast(rFiGrAtt.getOffsetY() * 100.0)); + o_rVCLGradient.SetSteps(rFiGrAtt.getSteps()); + + // defaults for intensity; those were computed into the start/end colors already + o_rVCLGradient.SetStartIntensity(100); + o_rVCLGradient.SetEndIntensity(100); + + switch (rFiGrAtt.getStyle()) + { + default: // attribute::GradientStyle::Linear : + { + o_rVCLGradient.SetStyle(GradientStyle::Linear); + break; + } + case attribute::GradientStyle::Axial: + { + o_rVCLGradient.SetStyle(GradientStyle::Axial); + break; + } + case attribute::GradientStyle::Radial: + { + o_rVCLGradient.SetStyle(GradientStyle::Radial); + break; + } + case attribute::GradientStyle::Elliptical: + { + o_rVCLGradient.SetStyle(GradientStyle::Elliptical); + break; + } + case attribute::GradientStyle::Square: + { + o_rVCLGradient.SetStyle(GradientStyle::Square); + break; + } + case attribute::GradientStyle::Rect: + { + o_rVCLGradient.SetStyle(GradientStyle::Rect); + break; + } + } +} + +void VclMetafileProcessor2D::impStartSvtGraphicFill(SvtGraphicFill const* pSvtGraphicFill) +{ + if (pSvtGraphicFill && !mnSvtGraphicFillCount) + { + SvMemoryStream aMemStm; + + WriteSvtGraphicFill(aMemStm, *pSvtGraphicFill); + mpMetaFile->AddAction(new MetaCommentAction( + "XPATHFILL_SEQ_BEGIN", 0, static_cast(aMemStm.GetData()), + aMemStm.TellEnd())); + mnSvtGraphicFillCount++; + } +} + +void VclMetafileProcessor2D::impEndSvtGraphicFill(SvtGraphicFill const* pSvtGraphicFill) +{ + if (pSvtGraphicFill && mnSvtGraphicFillCount) + { + mnSvtGraphicFillCount--; + mpMetaFile->AddAction(new MetaCommentAction("XPATHFILL_SEQ_END")); + } +} + +double VclMetafileProcessor2D::getTransformedLineWidth(double fWidth) const +{ + // #i113922# the LineWidth is duplicated in the MetaPolylineAction, + // and also inside the SvtGraphicStroke and needs transforming into + // the same space as its coordinates here cf. fdo#61789 + // This is a partial fix. When an object transformation is used which + // e.g. contains a scaleX != scaleY, an unproportional scaling will happen. + const basegfx::B2DVector aDiscreteUnit(maCurrentTransformation + * basegfx::B2DVector(fWidth, 0.0)); + + return aDiscreteUnit.getLength(); +} + +std::unique_ptr VclMetafileProcessor2D::impTryToCreateSvtGraphicStroke( + const basegfx::B2DPolygon& rB2DPolygon, const basegfx::BColor* pColor, + const attribute::LineAttribute* pLineAttribute, + const attribute::StrokeAttribute* pStrokeAttribute, + const attribute::LineStartEndAttribute* pStart, const attribute::LineStartEndAttribute* pEnd) +{ + std::unique_ptr pRetval; + + if (rB2DPolygon.count() && !mnSvtGraphicStrokeCount) + { + basegfx::B2DPolygon aLocalPolygon(rB2DPolygon); + basegfx::BColor aStrokeColor; + basegfx::B2DPolyPolygon aStartArrow; + basegfx::B2DPolyPolygon aEndArrow; + + if (pColor) + { + aStrokeColor = *pColor; + } + else if (pLineAttribute) + { + aStrokeColor = maBColorModifierStack.getModifiedColor(pLineAttribute->getColor()); + } + + // It IS needed to record the stroke color at all in the metafile, + // SvtGraphicStroke has NO entry for stroke color(!) + mpOutputDevice->SetLineColor(Color(aStrokeColor)); + + if (!aLocalPolygon.isClosed()) + { + double fPolyLength(0.0); + double fStart(0.0); + double fEnd(0.0); + + if (pStart && pStart->isActive()) + { + fPolyLength = basegfx::utils::getLength(aLocalPolygon); + + aStartArrow = basegfx::utils::createAreaGeometryForLineStartEnd( + aLocalPolygon, pStart->getB2DPolyPolygon(), true, pStart->getWidth(), + fPolyLength, pStart->isCentered() ? 0.5 : 0.0, &fStart); + } + + if (pEnd && pEnd->isActive()) + { + if (basegfx::fTools::equalZero(fPolyLength)) + { + fPolyLength = basegfx::utils::getLength(aLocalPolygon); + } + + aEndArrow = basegfx::utils::createAreaGeometryForLineStartEnd( + aLocalPolygon, pEnd->getB2DPolyPolygon(), false, pEnd->getWidth(), fPolyLength, + pEnd->isCentered() ? 0.5 : 0.0, &fEnd); + } + + if (0.0 != fStart || 0.0 != fEnd) + { + // build new poly, consume something from old poly + aLocalPolygon = basegfx::utils::getSnippetAbsolute(aLocalPolygon, fStart, + fPolyLength - fEnd, fPolyLength); + } + } + + SvtGraphicStroke::JoinType eJoin(SvtGraphicStroke::joinNone); + SvtGraphicStroke::CapType eCap(SvtGraphicStroke::capButt); + double fLineWidth(0.0); + double fMiterLength(0.0); + SvtGraphicStroke::DashArray aDashArray; + + if (pLineAttribute) + { + fLineWidth = fMiterLength = getTransformedLineWidth(pLineAttribute->getWidth()); + + // get Join + switch (pLineAttribute->getLineJoin()) + { + case basegfx::B2DLineJoin::NONE: + { + eJoin = SvtGraphicStroke::joinNone; + break; + } + case basegfx::B2DLineJoin::Bevel: + { + eJoin = SvtGraphicStroke::joinBevel; + break; + } + case basegfx::B2DLineJoin::Miter: + { + eJoin = SvtGraphicStroke::joinMiter; + // ATM 15 degrees is assumed + // TODO wait for P1383R0 and C++20's std::numbers::pi + fMiterLength /= std::sin(M_PI / 12); + break; + } + case basegfx::B2DLineJoin::Round: + { + eJoin = SvtGraphicStroke::joinRound; + break; + } + } + + // get stroke + switch (pLineAttribute->getLineCap()) + { + default: /* css::drawing::LineCap_BUTT */ + { + eCap = SvtGraphicStroke::capButt; + break; + } + case css::drawing::LineCap_ROUND: + { + eCap = SvtGraphicStroke::capRound; + break; + } + case css::drawing::LineCap_SQUARE: + { + eCap = SvtGraphicStroke::capSquare; + break; + } + } + } + + if (pStrokeAttribute) + { + // copy dash array + aDashArray = pStrokeAttribute->getDotDashArray(); + } + + // #i101734# apply current object transformation to created geometry. + // This is a partial fix. When an object transformation is used which + // e.g. contains a scaleX != scaleY, an unproportional scaling would + // have to be applied to the evtl. existing fat line. The current + // concept of PDF export and SvtGraphicStroke usage does simply not + // allow handling such definitions. The only clean way would be to + // add the transformation to SvtGraphicStroke and to handle it there + aLocalPolygon.transform(maCurrentTransformation); + aStartArrow.transform(maCurrentTransformation); + aEndArrow.transform(maCurrentTransformation); + + pRetval.reset( + new SvtGraphicStroke(tools::Polygon(aLocalPolygon), tools::PolyPolygon(aStartArrow), + tools::PolyPolygon(aEndArrow), mfCurrentUnifiedTransparence, + fLineWidth, eCap, eJoin, fMiterLength, std::move(aDashArray))); + } + + return pRetval; +} + +void VclMetafileProcessor2D::impStartSvtGraphicStroke(SvtGraphicStroke const* pSvtGraphicStroke) +{ + if (pSvtGraphicStroke && !mnSvtGraphicStrokeCount) + { + SvMemoryStream aMemStm; + + WriteSvtGraphicStroke(aMemStm, *pSvtGraphicStroke); + mpMetaFile->AddAction(new MetaCommentAction( + "XPATHSTROKE_SEQ_BEGIN", 0, static_cast(aMemStm.GetData()), + aMemStm.TellEnd())); + mnSvtGraphicStrokeCount++; + } +} + +void VclMetafileProcessor2D::impEndSvtGraphicStroke(SvtGraphicStroke const* pSvtGraphicStroke) +{ + if (pSvtGraphicStroke && mnSvtGraphicStrokeCount) + { + mnSvtGraphicStrokeCount--; + mpMetaFile->AddAction(new MetaCommentAction("XPATHSTROKE_SEQ_END")); + } +} + +void VclMetafileProcessor2D::popStructureElement(vcl::PDFWriter::StructElement eElem) +{ + if (!maListElements.empty() && maListElements.top() == eElem) + { + maListElements.pop(); + mpPDFExtOutDevData->EndStructureElement(); + } +} + +void VclMetafileProcessor2D::popListItem() +{ + popStructureElement(vcl::PDFWriter::LIBody); + popStructureElement(vcl::PDFWriter::ListItem); +} + +void VclMetafileProcessor2D::popList() +{ + popListItem(); + popStructureElement(vcl::PDFWriter::List); +} + +// init static break iterator +uno::Reference VclMetafileProcessor2D::mxBreakIterator; + +VclMetafileProcessor2D::VclMetafileProcessor2D(const geometry::ViewInformation2D& rViewInformation, + OutputDevice& rOutDev) + : VclProcessor2D(rViewInformation, rOutDev) + , mpMetaFile(rOutDev.GetConnectMetaFile()) + , mnSvtGraphicFillCount(0) + , mnSvtGraphicStrokeCount(0) + , mfCurrentUnifiedTransparence(0.0) + , mpPDFExtOutDevData(dynamic_cast(rOutDev.GetExtOutDevData())) + , mnCurrentOutlineLevel(-1) + , mbInListItem(false) + , mbBulletPresent(false) +{ + OSL_ENSURE(rOutDev.GetConnectMetaFile(), + "VclMetafileProcessor2D: Used on OutDev which has no MetaFile Target (!)"); + // draw to logic coordinates, do not initialize maCurrentTransformation to viewTransformation + // but only to ObjectTransformation. Do not change MapMode of destination. + maCurrentTransformation = rViewInformation.getObjectTransformation(); +} + +VclMetafileProcessor2D::~VclMetafileProcessor2D() +{ + // MapMode was not changed, no restore necessary +} + +/*********************************************************************************************** + + Support of MetaCommentActions in the VclMetafileProcessor2D + Found MetaCommentActions and how they are supported: + + XGRAD_SEQ_BEGIN, XGRAD_SEQ_END: + + Used inside OutputDevice::DrawGradient to mark the start and end of a MetaGradientEx action. + It is used in various exporters/importers to have direct access to the gradient before it + is rendered by VCL (and thus fragmented to polygon color actions and others). On that base, e.g. + the Metafile to SdrObject import creates its gradient objects. + Best (and safest) way to support it here is to use PRIMITIVE2D_ID_POLYPOLYGONGRADIENTPRIMITIVE2D, + map it back to the corresponding tools tools::PolyPolygon and the Gradient and just call + OutputDevice::DrawGradient which creates the necessary compatible actions. + + XPATHFILL_SEQ_BEGIN, XPATHFILL_SEQ_END: + + Two producers, one is vcl/source/gdi/gdimtf.cxx, line 1273. There, it is transformed + inside GDIMetaFile::Rotate, nothing to take care of here. + The second producer is in graphics/svx/source/svdraw/impgrfll.cxx, line 374. This is used + with each incarnation of Imp_GraphicFill when a metafile is recorded, fillstyle is not + XFILL_NONE and not completely transparent. It creates a SvtGraphicFill and streams it + to the comment action. A closing end token is created in the destructor. + Usages of Imp_GraphicFill are in Do_Paint_Object-methods of SdrCircObj, SdrPathObj and + SdrRectObj. + The token users pick various actions from SvtGraphicFill, so it may need to be added for all kind + of filled objects, even simple colored polygons. It is added as extra information; the + Metafile actions between the two tokens are interpreted as output generated from those + fills. Thus, users have the choice to use the SvtGraphicFill info or the created output + actions. + Even for XFillTransparenceItem it is used, thus it may need to be supported in + UnifiedTransparencePrimitive2D, too, when interpreted as normally filled PolyPolygon. + Implemented for: + PRIMITIVE2D_ID_POLYPOLYGONGRAPHICPRIMITIVE2D, + PRIMITIVE2D_ID_POLYPOLYGONHATCHPRIMITIVE2D, + PRIMITIVE2D_ID_POLYPOLYGONGRADIENTPRIMITIVE2D, + PRIMITIVE2D_ID_POLYPOLYGONCOLORPRIMITIVE2D, + and for PRIMITIVE2D_ID_UNIFIEDTRANSPARENCEPRIMITIVE2D when detected unified transparence + + XPATHSTROKE_SEQ_BEGIN, XPATHSTROKE_SEQ_END: + + Similar to pathfill, but using SvtGraphicStroke instead. It also has two producers where one + is also the GDIMetaFile::Rotate. Another user is MetaCommentAction::Move which modifies the + contained path accordingly. + The other one is SdrObject::Imp_DrawLineGeometry. It's done when MetaFile is set at OutDev and + only when geometry is a single polygon (!). I see no reason for that; in the PS exporter this + would hinder to make use of tools::PolyPolygon strokes. I will need to add support at: + PRIMITIVE2D_ID_POLYGONHAIRLINEPRIMITIVE2D + PRIMITIVE2D_ID_POLYGONSTROKEPRIMITIVE2D + PRIMITIVE2D_ID_POLYGONSTROKEARROWPRIMITIVE2D + This can be done hierarchical, too. + Okay, base implementation done based on those three primitives. + + FIELD_SEQ_BEGIN, FIELD_SEQ_END + + Used from slideshow for URLs, created from diverse SvxField implementations inside + createBeginComment()/createEndComment(). createBeginComment() is used from editeng\impedit3.cxx + inside ImpEditEngine::Paint. + Created TextHierarchyFieldPrimitive2D and added needed infos there; it is a group primitive and wraps + text primitives (but is not limited to that). It contains the field type if special actions for the + support of FIELD_SEQ_BEGIN/END are needed; this is the case for Page and URL fields. If more is + needed, it may be supported there. + FIELD_SEQ_BEGIN;PageField + FIELD_SEQ_END + Okay, these are now completely supported by TextHierarchyFieldPrimitive2D. URL works, too. + + XTEXT + + XTEXT_EOC(i) end of character + XTEXT_EOW(i) end of word + XTEXT_EOS(i) end of sentence + + this three are with index and are created with the help of an i18n::XBreakIterator in + ImplDrawWithComments. Simplifying, moving out text painting, reworking to create some + data structure for holding those TEXT infos. + Supported directly by TextSimplePortionPrimitive2D with adding a Locale to the basic text + primitive. In the MetaFileRenderer, the creation is now done (see below). This has the advantage + that this creations do not need to be done for all paints all the time. This would be + expensive since the BreakIterator and it's usage is expensive and for each paint also the + whole character stops would need to be created. + Created only for TextDecoratedPortionPrimitive2D due to XTEXT_EOL and XTEXT_EOP (see below) + + XTEXT_EOL() end of line + XTEXT_EOP() end of paragraph + + First try with boolean marks at TextDecoratedPortionPrimitive2D did not work too well, + i decided to solve it with structure. I added the TextHierarchyPrimitives for this, + namely: + - TextHierarchyLinePrimitive2D: Encapsulates single line + - TextHierarchyParagraphPrimitive2D: Encapsulates single paragraph + - TextHierarchyBlockPrimitive2D: encapsulates object texts (only one ATM) + Those are now supported in hierarchy. This means the MetaFile renderer will support them + by using them, recursively using their content and adding MetaFile comments as needed. + This also means that when another text layouter will be used it will be necessary to + create/support the same HierarchyPrimitives to support users. + To transport the information using this hierarchy is best suited to all future needs; + the slideshow will be able to profit from it directly when using primitives; all other + renderers not interested in the text structure will just ignore the encapsulations. + + XTEXT_PAINTSHAPE_BEGIN, XTEXT_PAINTSHAPE_END + Supported now by the TextHierarchyBlockPrimitive2D. + + EPSReplacementGraphic: + Only used in goodies\source\filter.vcl\ieps\ieps.cxx and svx\source\xml\xmlgrhlp.cxx to + hold the original EPS which was imported in the same MetaFile as first 2 entries. Only + used to export the original again (if exists). + Not necessary to support with MetaFileRenderer. + + XTEXT_SCROLLRECT, XTEXT_PAINTRECT + Currently used to get extra MetaFile infos using GraphicExporter which again uses + SdrTextObj::GetTextScrollMetaFileAndRectangle(). ATM works with primitives since + the rectangle data is added directly by the GraphicsExporter as comment. Does not need + to be adapted at once. + When adapting later, the only user - the diashow - should directly use the provided + Animation infos in the appropriate primitives (e.g. AnimatedSwitchPrimitive2D) + + PRNSPOOL_TRANSPARENTBITMAP_BEGIN, PRNSPOOL_TRANSPARENTBITMAP_END + VCL usage when printing PL -> THB. Okay, THB confirms that it is only used as + a fix (hack) while VCL printing. It is needed to not downscale a bitmap which + was explicitly created for the printer already again to some default maximum + bitmap sizes. + Nothing to do here for the primitive renderer. + + Support for vcl::PDFExtOutDevData: + PL knows that SJ did that stuff, it's used to hold a pointer to PDFExtOutDevData at + the OutDev. When set, some extra data is written there. Trying simple PDF export and + watching if I get those infos. + Well, a PDF export does not use e.g. ImpEditEngine::Paint since the PdfFilter uses + the SdXImpressDocument::render and thus uses the VclMetafileProcessor2D. I will check + if I get a PDFExtOutDevData at the target output device. + Indeed, I get one. Checking what all may be done when that extra-device-info is there. + + All in all I have to talk to SJ. I will need to emulate some of those actions, but + i need to discuss which ones. + In the future, all those infos would be taken from the primitive sequence anyways, + thus these extensions would potentially be temporary, too. + Discussed with SJ, added the necessary support and tested it. Details follow. + + - In ImpEditEngine::Paint, paragraph infos and URL stuff is added. + Added in primitive MetaFile renderer. + Checking URL: Indeed, current version exports it, but it is missing in primitive + CWS version. Adding support. + Okay, URLs work. Checked, Done. + + - UnoControlPDFExportContact is only created when PDFExtOutDevData is used at the + target and uno control data is created in UnoControlPDFExportContact::do_PaintObject. + This may be added in primitive MetaFile renderer. + Adding support... + OOps, the necessary helper stuff is in svx/source/form/formpdxexport.cxx in namespace + svxform. Have to talk to FS if this has to be like that. Especially since + vcl::PDFWriter::AnyWidget is filled out, which is already part of vcl. + Wrote an eMail to FS, he is on vacation currently. I see no reason why not to move + that stuff to somewhere else, maybe tools or svtools ?!? We will see... + Moved to toolkit, so I have to link against it. I tried VCL first, but it did + not work since VCLUnoHelper::CreateFont is unresolved in VCL (!). Other than the name + may imply, it is defined in toolkit (!). Since toolkit is linked against VCL itself, + the lowest movement plane is toolkit. + Checked form control export, it works well. Done. + + - In goodies, in GraphicObject::Draw, when the used Graphic is linked, infos are + generated. I will need to check what happens here with primitives. + To support, use of GraphicPrimitive2D (PRIMITIVE2D_ID_GRAPHICPRIMITIVE2D) may be needed. + Added support, but feature is broken in main version, so i cannot test at all. + Writing a bug to CL (or SJ) and seeing what happens (#i80380#). + SJ took a look and we got it working. Tested VCL MetaFile Renderer based export, + as intended, the original file is exported. Works, Done. + + + To be done: + + - Maybe there are more places to take care of for vcl::PDFExtOutDevData! + + +****************************************************************************************************/ + +void VclMetafileProcessor2D::processBasePrimitive2D(const primitive2d::BasePrimitive2D& rCandidate) +{ + switch (rCandidate.getPrimitive2DID()) + { + case PRIMITIVE2D_ID_WRONGSPELLPRIMITIVE2D: + { + // directdraw of wrong spell primitive + // Ignore for VclMetafileProcessor2D, this is for printing and MetaFile recording only + break; + } + case PRIMITIVE2D_ID_GRAPHICPRIMITIVE2D: + { + processGraphicPrimitive2D( + static_cast(rCandidate)); + break; + } + case PRIMITIVE2D_ID_CONTROLPRIMITIVE2D: + { + processControlPrimitive2D( + static_cast(rCandidate)); + break; + } + case PRIMITIVE2D_ID_TEXTHIERARCHYFIELDPRIMITIVE2D: + { + processTextHierarchyFieldPrimitive2D( + static_cast(rCandidate)); + break; + } + case PRIMITIVE2D_ID_TEXTHIERARCHYLINEPRIMITIVE2D: + { + processTextHierarchyLinePrimitive2D( + static_cast(rCandidate)); + break; + } + case PRIMITIVE2D_ID_TEXTHIERARCHYBULLETPRIMITIVE2D: + { + processTextHierarchyBulletPrimitive2D( + static_cast(rCandidate)); + break; + } + case PRIMITIVE2D_ID_TEXTHIERARCHYPARAGRAPHPRIMITIVE2D: + { + processTextHierarchyParagraphPrimitive2D( + static_cast(rCandidate)); + break; + } + case PRIMITIVE2D_ID_TEXTHIERARCHYBLOCKPRIMITIVE2D: + { + processTextHierarchyBlockPrimitive2D( + static_cast(rCandidate)); + break; + } + case PRIMITIVE2D_ID_TEXTSIMPLEPORTIONPRIMITIVE2D: + case PRIMITIVE2D_ID_TEXTDECORATEDPORTIONPRIMITIVE2D: + { + // for supporting TEXT_ MetaFile actions there is more to do here; get the candidate + processTextSimplePortionPrimitive2D( + static_cast(rCandidate)); + break; + } + case PRIMITIVE2D_ID_POLYGONHAIRLINEPRIMITIVE2D: + { + processPolygonHairlinePrimitive2D( + static_cast(rCandidate)); + break; + } + case PRIMITIVE2D_ID_POLYGONSTROKEPRIMITIVE2D: + { + processPolygonStrokePrimitive2D( + static_cast(rCandidate)); + break; + } + case PRIMITIVE2D_ID_POLYGONSTROKEARROWPRIMITIVE2D: + { + processPolygonStrokeArrowPrimitive2D( + static_cast(rCandidate)); + break; + } + case PRIMITIVE2D_ID_BITMAPPRIMITIVE2D: + { + // direct draw of transformed BitmapEx primitive; use default processing, but without + // former testing if graphic content is inside discrete local viewport; this is not + // setup for metafile targets (metafile renderer tries to render in logic coordinates, + // the mapping is kept to the OutputDevice for better Metafile recording) + RenderBitmapPrimitive2D(static_cast(rCandidate)); + break; + } + case PRIMITIVE2D_ID_POLYPOLYGONGRAPHICPRIMITIVE2D: + { + processPolyPolygonGraphicPrimitive2D( + static_cast(rCandidate)); + break; + } + case PRIMITIVE2D_ID_POLYPOLYGONHATCHPRIMITIVE2D: + { + processPolyPolygonHatchPrimitive2D( + static_cast(rCandidate)); + break; + } + case PRIMITIVE2D_ID_POLYPOLYGONGRADIENTPRIMITIVE2D: + { + processPolyPolygonGradientPrimitive2D( + static_cast(rCandidate)); + break; + } + case PRIMITIVE2D_ID_POLYPOLYGONCOLORPRIMITIVE2D: + { + processPolyPolygonColorPrimitive2D( + static_cast(rCandidate)); + break; + } + case PRIMITIVE2D_ID_MASKPRIMITIVE2D: + { + processMaskPrimitive2D(static_cast(rCandidate)); + break; + } + case PRIMITIVE2D_ID_MODIFIEDCOLORPRIMITIVE2D: + { + // modified color group. Force output to unified color. Use default processing. + RenderModifiedColorPrimitive2D( + static_cast(rCandidate)); + break; + } + case PRIMITIVE2D_ID_UNIFIEDTRANSPARENCEPRIMITIVE2D: + { + processUnifiedTransparencePrimitive2D( + static_cast(rCandidate)); + break; + } + case PRIMITIVE2D_ID_TRANSPARENCEPRIMITIVE2D: + { + processTransparencePrimitive2D( + static_cast(rCandidate)); + break; + } + case PRIMITIVE2D_ID_TRANSFORMPRIMITIVE2D: + { + // use default transform group processing + RenderTransformPrimitive2D( + static_cast(rCandidate)); + break; + } + case PRIMITIVE2D_ID_PAGEPREVIEWPRIMITIVE2D: + { + // new XDrawPage for ViewInformation2D + RenderPagePreviewPrimitive2D( + static_cast(rCandidate)); + break; + } + case PRIMITIVE2D_ID_MARKERARRAYPRIMITIVE2D: + { + // use default marker array processing + RenderMarkerArrayPrimitive2D( + static_cast(rCandidate)); + break; + } + case PRIMITIVE2D_ID_POINTARRAYPRIMITIVE2D: + { + // use default point array processing + RenderPointArrayPrimitive2D( + static_cast(rCandidate)); + break; + } + case PRIMITIVE2D_ID_STRUCTURETAGPRIMITIVE2D: + { + processStructureTagPrimitive2D( + static_cast(rCandidate)); + break; + } + case PRIMITIVE2D_ID_EPSPRIMITIVE2D: + { + RenderEpsPrimitive2D(static_cast(rCandidate)); + break; + } + case PRIMITIVE2D_ID_OBJECTINFOPRIMITIVE2D: + { + processObjectInfoPrimitive2D( + static_cast(rCandidate)); + break; + } + case PRIMITIVE2D_ID_SHADOWPRIMITIVE2D: + case PRIMITIVE2D_ID_GLOWPRIMITIVE2D: + case PRIMITIVE2D_ID_SOFTEDGEPRIMITIVE2D: + { + processPrimitive2DOnPixelProcessor(rCandidate); + break; + } + default: + { + // process recursively + process(rCandidate); + break; + } + } +} + +void VclMetafileProcessor2D::processObjectInfoPrimitive2D( + primitive2d::ObjectInfoPrimitive2D const& rObjectInfoPrimitive2D) +{ + // currently StructureTagPrimitive2D is only used for SdrObjects - have to + // avoid adding Alt text if the SdrObject is not actually tagged, as it + // would then end up on an unrelated structure element. + if (mpCurrentStructureTag && mpCurrentStructureTag->isTaggedSdrObject()) + { + // Create image alternative description from ObjectInfoPrimitive2D info + // for PDF export, for the currently active SdrObject's structure element + if (mpPDFExtOutDevData->GetIsExportTaggedPDF()) + { + OUString aAlternateDescription; + + if (!rObjectInfoPrimitive2D.getTitle().isEmpty()) + { + aAlternateDescription += rObjectInfoPrimitive2D.getTitle(); + } + + if (!rObjectInfoPrimitive2D.getDesc().isEmpty()) + { + if (!aAlternateDescription.isEmpty()) + { + aAlternateDescription += " - "; + } + + aAlternateDescription += rObjectInfoPrimitive2D.getDesc(); + } + + // Use SetAlternateText to set it. This will work as long as some + // structure is used (see PDFWriterImpl::setAlternateText and + // m_nCurrentStructElement - tagged PDF export works with this in + // Draw/Impress/Writer, but not in Calc due to too less structure...) + //Z maybe add structure to Calc PDF export, may need some BeginGroup/EndGroup stuff ..? + if (!aAlternateDescription.isEmpty()) + { + mpPDFExtOutDevData->SetAlternateText(aAlternateDescription); + } + } + } + + // process content + process(rObjectInfoPrimitive2D.getChildren()); +} + +void VclMetafileProcessor2D::processGraphicPrimitive2D( + const primitive2d::GraphicPrimitive2D& rGraphicPrimitive) +{ + bool bUsingPDFExtOutDevData(false); + basegfx::B2DVector aTranslate, aScale; + static bool bSuppressPDFExtOutDevDataSupport(false); // loplugin:constvars:ignore + + if (mpPDFExtOutDevData && !bSuppressPDFExtOutDevDataSupport) + { + // emulate data handling from UnoControlPDFExportContact, original see + // svtools/source/graphic/grfmgr.cxx + const Graphic& rGraphic = rGraphicPrimitive.getGraphicObject().GetGraphic(); + + if (rGraphic.IsGfxLink()) + { + const GraphicAttr& rAttr = rGraphicPrimitive.getGraphicAttr(); + + if (!rAttr.IsSpecialDrawMode() && !rAttr.IsAdjusted()) + { + const basegfx::B2DHomMatrix& rTransform = rGraphicPrimitive.getTransform(); + double fRotate, fShearX; + rTransform.decompose(aScale, aTranslate, fRotate, fShearX); + + if (basegfx::fTools::equalZero(fRotate) && (aScale.getX() > 0.0) + && (aScale.getY() > 0.0)) + { + bUsingPDFExtOutDevData = true; + mpPDFExtOutDevData->BeginGroup(); + } + } + } + } + + // process recursively and add MetaFile comment + process(rGraphicPrimitive); + + if (!bUsingPDFExtOutDevData) + return; + + // emulate data handling from UnoControlPDFExportContact, original see + // svtools/source/graphic/grfmgr.cxx + const basegfx::B2DRange aCurrentRange(aTranslate.getX(), aTranslate.getY(), + aTranslate.getX() + aScale.getX(), + aTranslate.getY() + aScale.getY()); + const tools::Rectangle aCurrentRect( + sal_Int32(floor(aCurrentRange.getMinX())), sal_Int32(floor(aCurrentRange.getMinY())), + sal_Int32(ceil(aCurrentRange.getMaxX())), sal_Int32(ceil(aCurrentRange.getMaxY()))); + const GraphicAttr& rAttr = rGraphicPrimitive.getGraphicAttr(); + // fdo#72530 don't pass empty Rectangle to EndGroup + tools::Rectangle aCropRect(aCurrentRect); + + if (rAttr.IsCropped()) + { + // calculate scalings between real image size and logic object size. This + // is necessary since the crop values are relative to original bitmap size + double fFactorX(1.0); + double fFactorY(1.0); + + { + const MapMode aMapMode100thmm(MapUnit::Map100thMM); + const Size aBitmapSize(OutputDevice::LogicToLogic( + rGraphicPrimitive.getGraphicObject().GetPrefSize(), + rGraphicPrimitive.getGraphicObject().GetPrefMapMode(), aMapMode100thmm)); + const double fDivX(aBitmapSize.Width() - rAttr.GetLeftCrop() - rAttr.GetRightCrop()); + const double fDivY(aBitmapSize.Height() - rAttr.GetTopCrop() - rAttr.GetBottomCrop()); + + if (!basegfx::fTools::equalZero(fDivX)) + { + fFactorX = aScale.getX() / fDivX; + } + + if (!basegfx::fTools::equalZero(fDivY)) + { + fFactorY = aScale.getY() / fDivY; + } + } + + // calculate crop range and rect + basegfx::B2DRange aCropRange; + aCropRange.expand( + aCurrentRange.getMinimum() + - basegfx::B2DPoint(rAttr.GetLeftCrop() * fFactorX, rAttr.GetTopCrop() * fFactorY)); + aCropRange.expand( + aCurrentRange.getMaximum() + + basegfx::B2DPoint(rAttr.GetRightCrop() * fFactorX, rAttr.GetBottomCrop() * fFactorY)); + + aCropRect = tools::Rectangle( + sal_Int32(floor(aCropRange.getMinX())), sal_Int32(floor(aCropRange.getMinY())), + sal_Int32(ceil(aCropRange.getMaxX())), sal_Int32(ceil(aCropRange.getMaxY()))); + } + + // #i123295# 3rd param is uncropped rect, 4th is cropped. The primitive has the cropped + // object transformation, thus aCurrentRect *is* the clip region while aCropRect is the expanded, + // uncropped region. Thus, correct order is aCropRect, aCurrentRect + mpPDFExtOutDevData->EndGroup(rGraphicPrimitive.getGraphicObject().GetGraphic(), + 255 - rAttr.GetAlpha(), aCropRect, aCurrentRect); +} + +void VclMetafileProcessor2D::processControlPrimitive2D( + const primitive2d::ControlPrimitive2D& rControlPrimitive) +{ + const uno::Reference& rXControl(rControlPrimitive.getXControl()); + bool bIsPrintableControl(false); + + // find out if control is printable + if (rXControl.is()) + { + try + { + uno::Reference xModelProperties(rXControl->getModel(), + uno::UNO_QUERY); + uno::Reference xPropertyInfo( + xModelProperties.is() ? xModelProperties->getPropertySetInfo() + : uno::Reference()); + static const OUStringLiteral sPrintablePropertyName(u"Printable"); + + if (xPropertyInfo.is() && xPropertyInfo->hasPropertyByName(sPrintablePropertyName)) + { + OSL_VERIFY(xModelProperties->getPropertyValue(sPrintablePropertyName) + >>= bIsPrintableControl); + } + } + catch (const uno::Exception&) + { + TOOLS_WARN_EXCEPTION("drawinglayer", + "VclMetafileProcessor2D: No access to printable flag of Control"); + } + } + + // PDF export and printing only for printable controls + if (!bIsPrintableControl) + return; + + const bool bPDFExport(mpPDFExtOutDevData && mpPDFExtOutDevData->GetIsExportFormFields()); + bool bDoProcessRecursively(true); + + if (bPDFExport) + { + // PDF export. Emulate data handling from UnoControlPDFExportContact + // I have now moved describePDFControl to toolkit, thus i can implement the PDF + // form control support now as follows + std::unique_ptr pPDFControl( + ::toolkitform::describePDFControl(rXControl, *mpPDFExtOutDevData)); + + if (pPDFControl) + { + // still need to fill in the location (is a class Rectangle) + const basegfx::B2DRange aRangeLogic( + rControlPrimitive.getB2DRange(getViewInformation2D())); + const tools::Rectangle aRectLogic(static_cast(floor(aRangeLogic.getMinX())), + static_cast(floor(aRangeLogic.getMinY())), + static_cast(ceil(aRangeLogic.getMaxX())), + static_cast(ceil(aRangeLogic.getMaxY()))); + pPDFControl->Location = aRectLogic; + + Size aFontSize(pPDFControl->TextFont.GetFontSize()); + aFontSize = OutputDevice::LogicToLogic(aFontSize, MapMode(MapUnit::MapPoint), + mpOutputDevice->GetMapMode()); + pPDFControl->TextFont.SetFontSize(aFontSize); + + mpPDFExtOutDevData->BeginStructureElement(vcl::PDFWriter::Form); + mpPDFExtOutDevData->CreateControl(*pPDFControl); + mpPDFExtOutDevData->EndStructureElement(); + + // no normal paint needed (see original UnoControlPDFExportContact::do_PaintObject); + // do not process recursively + bDoProcessRecursively = false; + } + else + { + // PDF export did not work, try simple output. + // Fallback to printer output by not setting bDoProcessRecursively + // to false. + } + } + + // #i93169# used flag the wrong way; true means that nothing was done yet + if (bDoProcessRecursively) + { + // printer output + try + { + // remember old graphics and create new + uno::Reference xControlView(rXControl, uno::UNO_QUERY_THROW); + const uno::Reference xOriginalGraphics(xControlView->getGraphics()); + const uno::Reference xNewGraphics(mpOutputDevice->CreateUnoGraphics()); + + if (xNewGraphics.is()) + { + // link graphics and view + xControlView->setGraphics(xNewGraphics); + + // get position + const basegfx::B2DHomMatrix aObjectToDiscrete( + getViewInformation2D().getObjectToViewTransformation() + * rControlPrimitive.getTransform()); + const basegfx::B2DPoint aTopLeftDiscrete(aObjectToDiscrete + * basegfx::B2DPoint(0.0, 0.0)); + + // draw it + xControlView->draw(basegfx::fround(aTopLeftDiscrete.getX()), + basegfx::fround(aTopLeftDiscrete.getY())); + bDoProcessRecursively = false; + + // restore original graphics + xControlView->setGraphics(xOriginalGraphics); + } + } + catch (const uno::Exception&) + { + TOOLS_WARN_EXCEPTION("drawinglayer", + "VclMetafileProcessor2D: Printing of Control failed"); + } + } + + // process recursively if not done yet to export as decomposition (bitmap) + if (bDoProcessRecursively) + { + process(rControlPrimitive); + } +} + +void VclMetafileProcessor2D::processTextHierarchyFieldPrimitive2D( + const primitive2d::TextHierarchyFieldPrimitive2D& rFieldPrimitive) +{ + // support for FIELD_SEQ_BEGIN, FIELD_SEQ_END and URL. It wraps text primitives (but is not limited to) + // thus do the MetafileAction embedding stuff but just handle recursively. + const OString aCommentStringCommon("FIELD_SEQ_BEGIN"); + OUString aURL; + + switch (rFieldPrimitive.getType()) + { + default: // case drawinglayer::primitive2d::FIELD_TYPE_COMMON : + { + mpMetaFile->AddAction(new MetaCommentAction(aCommentStringCommon)); + break; + } + case drawinglayer::primitive2d::FIELD_TYPE_PAGE: + { + mpMetaFile->AddAction(new MetaCommentAction("FIELD_SEQ_BEGIN;PageField")); + break; + } + case drawinglayer::primitive2d::FIELD_TYPE_URL: + { + aURL = rFieldPrimitive.getValue("URL"); + + if (!aURL.isEmpty()) + { + mpMetaFile->AddAction(new MetaCommentAction( + aCommentStringCommon, 0, reinterpret_cast(aURL.getStr()), + 2 * aURL.getLength())); + } + + break; + } + } + + // process recursively + primitive2d::Primitive2DContainer rContent; + rFieldPrimitive.get2DDecomposition(rContent, getViewInformation2D()); + process(rContent); + + // for the end comment the type is not relevant yet, they are all the same. Just add. + mpMetaFile->AddAction(new MetaCommentAction("FIELD_SEQ_END")); + + if (!(mpPDFExtOutDevData + && drawinglayer::primitive2d::FIELD_TYPE_URL == rFieldPrimitive.getType())) + return; + + // emulate data handling from ImpEditEngine::Paint + const basegfx::B2DRange aViewRange(rContent.getB2DRange(getViewInformation2D())); + const tools::Rectangle aRectLogic(static_cast(floor(aViewRange.getMinX())), + static_cast(floor(aViewRange.getMinY())), + static_cast(ceil(aViewRange.getMaxX())), + static_cast(ceil(aViewRange.getMaxY()))); + vcl::PDFExtOutDevBookmarkEntry aBookmark; + OUString const content(rFieldPrimitive.getValue("Representation")); + aBookmark.nLinkId = mpPDFExtOutDevData->CreateLink(aRectLogic, content); + aBookmark.aBookmark = aURL; + std::vector& rBookmarks = mpPDFExtOutDevData->GetBookmarks(); + rBookmarks.push_back(aBookmark); +} + +void VclMetafileProcessor2D::processTextHierarchyLinePrimitive2D( + const primitive2d::TextHierarchyLinePrimitive2D& rLinePrimitive) +{ + // process recursively and add MetaFile comment + process(rLinePrimitive); + mpMetaFile->AddAction(new MetaCommentAction("XTEXT_EOL")); +} + +void VclMetafileProcessor2D::processTextHierarchyBulletPrimitive2D( + const primitive2d::TextHierarchyBulletPrimitive2D& rBulletPrimitive) +{ + // this is a part of list item, start LILabel ( = bullet) + if (mbInListItem) + { + maListElements.push(vcl::PDFWriter::LILabel); + mpPDFExtOutDevData->BeginStructureElement(vcl::PDFWriter::LILabel); + } + + // process recursively and add MetaFile comment + process(rBulletPrimitive); + // in Outliner::PaintBullet(), a MetafileComment for bullets is added, too. The + // "XTEXT_EOC" is used, use here, too. + mpMetaFile->AddAction(new MetaCommentAction("XTEXT_EOC")); + + if (mbInListItem) + { + if (maListElements.top() == vcl::PDFWriter::LILabel) + { + maListElements.pop(); + mpPDFExtOutDevData->EndStructureElement(); // end LILabel + mbBulletPresent = true; + } + } +} + +void VclMetafileProcessor2D::processTextHierarchyParagraphPrimitive2D( + const primitive2d::TextHierarchyParagraphPrimitive2D& rParagraphPrimitive) +{ + const OString aCommentString("XTEXT_EOP"); + static bool bSuppressPDFExtOutDevDataSupport(false); // loplugin:constvars:ignore + + if (nullptr == mpPDFExtOutDevData || bSuppressPDFExtOutDevDataSupport) + { + // Non-PDF export behaviour (metafile only). + // Process recursively and add MetaFile comment. + process(rParagraphPrimitive); + mpMetaFile->AddAction(new MetaCommentAction(aCommentString)); + return; + } + + if (!mpPDFExtOutDevData->GetIsExportTaggedPDF()) + { + // No Tagged PDF -> Dump as Paragraph + // Emulate data handling from old ImpEditEngine::Paint + mpPDFExtOutDevData->BeginStructureElement(vcl::PDFWriter::Paragraph); + + // Process recursively and add MetaFile comment + process(rParagraphPrimitive); + mpMetaFile->AddAction(new MetaCommentAction(aCommentString)); + + // Emulate data handling from ImpEditEngine::Paint + mpPDFExtOutDevData->EndStructureElement(); + return; + } + + // Create Tagged PDF -> deeper tagged data using StructureElements. + // Use OutlineLevel from ParagraphPrimitive, ensure not below -1 what + // means 'not active' + const sal_Int16 nNewOutlineLevel( + std::max(static_cast(-1), rParagraphPrimitive.getOutlineLevel())); + + // Do we have a change in OutlineLevel compared to the current one? + if (nNewOutlineLevel != mnCurrentOutlineLevel) + { + if (nNewOutlineLevel > mnCurrentOutlineLevel) + { + // increase List level + for (sal_Int16 a(mnCurrentOutlineLevel); a != nNewOutlineLevel; ++a) + { + maListElements.push(vcl::PDFWriter::List); + mpPDFExtOutDevData->BeginStructureElement(vcl::PDFWriter::List); + } + } + else // if(nNewOutlineLevel < mnCurrentOutlineLevel) + { + // close list levels below nNewOutlineLevel completely by removing + // list items as well as list tag itself + for (sal_Int16 a(nNewOutlineLevel); a < mnCurrentOutlineLevel; ++a) + { + popList(); // end LBody LI and L + } + + // on nNewOutlineLevel close the previous list item (LBody and LI) + popListItem(); + } + + // Remember new current OutlineLevel + mnCurrentOutlineLevel = nNewOutlineLevel; + } + else // the same list level + { + // close the previous list item (LBody and LI) + popListItem(); + } + + const bool bDumpAsListItem(-1 != mnCurrentOutlineLevel); + + if (bDumpAsListItem) + { + // Dump as ListItem + maListElements.push(vcl::PDFWriter::ListItem); + mpPDFExtOutDevData->BeginStructureElement(vcl::PDFWriter::ListItem); + mbInListItem = true; + } + else + { + // Dump as Paragraph + mpPDFExtOutDevData->BeginStructureElement(vcl::PDFWriter::Paragraph); + } + + // Process recursively and add MetaFile comment + process(rParagraphPrimitive); + mpMetaFile->AddAction(new MetaCommentAction(aCommentString)); + + if (bDumpAsListItem) + mbInListItem = false; + else + mpPDFExtOutDevData->EndStructureElement(); // end Paragraph +} + +void VclMetafileProcessor2D::processTextHierarchyBlockPrimitive2D( + const primitive2d::TextHierarchyBlockPrimitive2D& rBlockPrimitive) +{ + // add MetaFile comment, process recursively and add MetaFile comment + mpMetaFile->AddAction(new MetaCommentAction("XTEXT_PAINTSHAPE_BEGIN")); + process(rBlockPrimitive); + + if (mnCurrentOutlineLevel >= 0) + { + // end any opened List structure elements (LBody, LI, L) + for (sal_Int16 a(0); a <= mnCurrentOutlineLevel; ++a) + { + popList(); + } + } + + mpMetaFile->AddAction(new MetaCommentAction("XTEXT_PAINTSHAPE_END")); +} + +void VclMetafileProcessor2D::processTextSimplePortionPrimitive2D( + const primitive2d::TextSimplePortionPrimitive2D& rTextCandidate) +{ + // Adapt evtl. used special DrawMode + const DrawModeFlags nOriginalDrawMode(mpOutputDevice->GetDrawMode()); + adaptTextToFillDrawMode(); + + // this is a 2nd portion of list item + // bullet has been already processed, start LIBody + if (mbInListItem && mbBulletPresent) + { + maListElements.push(vcl::PDFWriter::LIBody); + mpPDFExtOutDevData->BeginStructureElement(vcl::PDFWriter::LIBody); + } + + // directdraw of text simple portion; use default processing + RenderTextSimpleOrDecoratedPortionPrimitive2D(rTextCandidate); + + if (mbInListItem && mbBulletPresent) + mbBulletPresent = false; + + // restore DrawMode + mpOutputDevice->SetDrawMode(nOriginalDrawMode); + + // #i101169# if(pTextDecoratedCandidate) + { + // support for TEXT_ MetaFile actions only for decorated texts + if (!mxBreakIterator.is()) + { + uno::Reference xContext( + ::comphelper::getProcessComponentContext()); + mxBreakIterator = i18n::BreakIterator::create(xContext); + } + + const OUString& rTxt = rTextCandidate.getText(); + const sal_Int32 nTextLength(rTextCandidate.getTextLength()); // rTxt.getLength()); + + if (nTextLength) + { + const css::lang::Locale& rLocale = rTextCandidate.getLocale(); + const sal_Int32 nTextPosition(rTextCandidate.getTextPosition()); + + sal_Int32 nDone; + sal_Int32 nNextCellBreak(mxBreakIterator->nextCharacters( + rTxt, nTextPosition, rLocale, css::i18n::CharacterIteratorMode::SKIPCELL, 0, + nDone)); + css::i18n::Boundary nNextWordBoundary(mxBreakIterator->getWordBoundary( + rTxt, nTextPosition, rLocale, css::i18n::WordType::ANY_WORD, true)); + sal_Int32 nNextSentenceBreak( + mxBreakIterator->endOfSentence(rTxt, nTextPosition, rLocale)); + const OString aCommentStringA("XTEXT_EOC"); + const OString aCommentStringB("XTEXT_EOW"); + const OString aCommentStringC("XTEXT_EOS"); + + for (sal_Int32 i(nTextPosition); i < nTextPosition + nTextLength; i++) + { + // create the entries for the respective break positions + if (i == nNextCellBreak) + { + mpMetaFile->AddAction( + new MetaCommentAction(aCommentStringA, i - nTextPosition)); + nNextCellBreak = mxBreakIterator->nextCharacters( + rTxt, i, rLocale, css::i18n::CharacterIteratorMode::SKIPCELL, 1, nDone); + } + if (i == nNextWordBoundary.endPos) + { + mpMetaFile->AddAction( + new MetaCommentAction(aCommentStringB, i - nTextPosition)); + nNextWordBoundary = mxBreakIterator->getWordBoundary( + rTxt, i + 1, rLocale, css::i18n::WordType::ANY_WORD, true); + } + if (i == nNextSentenceBreak) + { + mpMetaFile->AddAction( + new MetaCommentAction(aCommentStringC, i - nTextPosition)); + nNextSentenceBreak = mxBreakIterator->endOfSentence(rTxt, i + 1, rLocale); + } + } + } + } +} + +void VclMetafileProcessor2D::processPolygonHairlinePrimitive2D( + const primitive2d::PolygonHairlinePrimitive2D& rHairlinePrimitive) +{ + const basegfx::B2DPolygon& rBasePolygon = rHairlinePrimitive.getB2DPolygon(); + + if (rBasePolygon.count() > (MAX_POLYGON_POINT_COUNT_METAFILE - 1)) + { + // #i112245# Metafiles use tools Polygon and are not able to have more than 65535 points + // per polygon. If there are more, split the polygon in half and call recursively + basegfx::B2DPolygon aLeft, aRight; + splitLinePolygon(rBasePolygon, aLeft, aRight); + rtl::Reference xPLeft( + new primitive2d::PolygonHairlinePrimitive2D(aLeft, rHairlinePrimitive.getBColor())); + rtl::Reference xPRight( + new primitive2d::PolygonHairlinePrimitive2D(aRight, rHairlinePrimitive.getBColor())); + + processBasePrimitive2D(*xPLeft); + processBasePrimitive2D(*xPRight); + } + else + { + // direct draw of hairline; use default processing + // support SvtGraphicStroke MetaCommentAction + const basegfx::BColor aLineColor( + maBColorModifierStack.getModifiedColor(rHairlinePrimitive.getBColor())); + std::unique_ptr pSvtGraphicStroke; + + // #i121267# Not needed, does not give better quality compared with + // the MetaActionType::POLYPOLYGON written by RenderPolygonHairlinePrimitive2D + // below + const bool bSupportSvtGraphicStroke(false); + + if (bSupportSvtGraphicStroke) + { + pSvtGraphicStroke + = impTryToCreateSvtGraphicStroke(rHairlinePrimitive.getB2DPolygon(), &aLineColor, + nullptr, nullptr, nullptr, nullptr); + + impStartSvtGraphicStroke(pSvtGraphicStroke.get()); + } + + RenderPolygonHairlinePrimitive2D(rHairlinePrimitive, false); + + if (bSupportSvtGraphicStroke) + { + impEndSvtGraphicStroke(pSvtGraphicStroke.get()); + } + } +} + +void VclMetafileProcessor2D::processPolygonStrokePrimitive2D( + const primitive2d::PolygonStrokePrimitive2D& rStrokePrimitive) +{ + const basegfx::B2DPolygon& rBasePolygon = rStrokePrimitive.getB2DPolygon(); + + if (rBasePolygon.count() > (MAX_POLYGON_POINT_COUNT_METAFILE - 1)) + { + // #i112245# Metafiles use tools Polygon and are not able to have more than 65535 points + // per polygon. If there are more, split the polygon in half and call recursively + basegfx::B2DPolygon aLeft, aRight; + splitLinePolygon(rBasePolygon, aLeft, aRight); + rtl::Reference xPLeft( + new primitive2d::PolygonStrokePrimitive2D(aLeft, rStrokePrimitive.getLineAttribute(), + rStrokePrimitive.getStrokeAttribute())); + rtl::Reference xPRight( + new primitive2d::PolygonStrokePrimitive2D(aRight, rStrokePrimitive.getLineAttribute(), + rStrokePrimitive.getStrokeAttribute())); + + processBasePrimitive2D(*xPLeft); + processBasePrimitive2D(*xPRight); + } + else + { + mpOutputDevice->Push(vcl::PushFlags::LINECOLOR | vcl::PushFlags::FILLCOLOR); + + // support SvtGraphicStroke MetaCommentAction + std::unique_ptr pSvtGraphicStroke = impTryToCreateSvtGraphicStroke( + rBasePolygon, nullptr, &rStrokePrimitive.getLineAttribute(), + &rStrokePrimitive.getStrokeAttribute(), nullptr, nullptr); + + impStartSvtGraphicStroke(pSvtGraphicStroke.get()); + const attribute::LineAttribute& rLine = rStrokePrimitive.getLineAttribute(); + + // create MetaPolyLineActions, but without LineStyle::Dash + if (basegfx::fTools::more(rLine.getWidth(), 0.0)) + { + const attribute::StrokeAttribute& rStroke = rStrokePrimitive.getStrokeAttribute(); + + const basegfx::BColor aHairlineColor( + maBColorModifierStack.getModifiedColor(rLine.getColor())); + mpOutputDevice->SetLineColor(Color(aHairlineColor)); + mpOutputDevice->SetFillColor(); + + // use the transformed line width + LineInfo aLineInfo(LineStyle::Solid, + basegfx::fround(getTransformedLineWidth(rLine.getWidth()))); + aLineInfo.SetLineJoin(rLine.getLineJoin()); + aLineInfo.SetLineCap(rLine.getLineCap()); + + basegfx::B2DPolyPolygon aHairLinePolyPolygon; + if (0.0 == rStroke.getFullDotDashLen()) + { + aHairLinePolyPolygon.append(rBasePolygon); + } + else + { + bool done = false; + const std::vector& array = rStroke.getDotDashArray(); + // The dotdash array should generally have the form + // ( )+ ( )* + // (where (,),+ and * have their regex meaning). + // Find out what the lengths and their counts are. + if (!array.empty() && array.size() % 2 == 0) + { + double dashLen = array[0]; + double distance = array[1]; + int dashCount = 1; + double dotLen = 0; + int dotCount = 0; + size_t pos = 2; + while (pos + 2 <= array.size()) + { + if (array[pos] != dashLen || array[pos + 1] != distance) + break; + ++dashCount; + pos += 2; + } + if (pos + 2 <= array.size() && array[pos + 1] == distance) + { + dotLen = array[pos]; + ++dotCount; + pos += 2; + while (pos + 2 <= array.size()) + { + if (array[pos] != dotLen || array[pos + 1] != distance) + break; + ++dotCount; + pos += 2; + } + } + if (array.size() == pos) + { + aHairLinePolyPolygon.append(rBasePolygon); + // This will be used by setupStrokeAttributes() in cppcanvas. + aLineInfo.SetStyle(LineStyle::Dash); + aLineInfo.SetDashCount(dashCount); + aLineInfo.SetDashLen(getTransformedLineWidth(dashLen)); + aLineInfo.SetDistance(getTransformedLineWidth(distance)); + if (dotCount != 0) + { + aLineInfo.SetDotCount(dotCount); + aLineInfo.SetDotLen(getTransformedLineWidth(dotLen)); + } + done = true; + } + } + if (!done) + { + // LineInfo can hold only limited info about dashing, apply dashing manually + // if LineInfo cannot describe it. That should not happen though. + SAL_WARN("drawinglayer", "dotdash array cannot be converted to LineInfo"); + basegfx::utils::applyLineDashing(rBasePolygon, rStroke.getDotDashArray(), + &aHairLinePolyPolygon, nullptr, + rStroke.getFullDotDashLen()); + } + } + aHairLinePolyPolygon.transform(maCurrentTransformation); + + for (sal_uInt32 a(0); a < aHairLinePolyPolygon.count(); a++) + { + const basegfx::B2DPolygon& aCandidate(aHairLinePolyPolygon.getB2DPolygon(a)); + + if (aCandidate.count() > 1) + { + const tools::Polygon aToolsPolygon(aCandidate); + + mpMetaFile->AddAction(new MetaPolyLineAction(aToolsPolygon, aLineInfo)); + } + } + } + else + { + process(rStrokePrimitive); + } + + impEndSvtGraphicStroke(pSvtGraphicStroke.get()); + + mpOutputDevice->Pop(); + } +} + +void VclMetafileProcessor2D::processPolygonStrokeArrowPrimitive2D( + const primitive2d::PolygonStrokeArrowPrimitive2D& rStrokeArrowPrimitive) +{ + const basegfx::B2DPolygon& rBasePolygon = rStrokeArrowPrimitive.getB2DPolygon(); + + if (rBasePolygon.count() > (MAX_POLYGON_POINT_COUNT_METAFILE - 1)) + { + // #i112245# Metafiles use tools Polygon and are not able to have more than 65535 points + // per polygon. If there are more, split the polygon in half and call recursively + basegfx::B2DPolygon aLeft, aRight; + splitLinePolygon(rBasePolygon, aLeft, aRight); + const attribute::LineStartEndAttribute aEmpty; + rtl::Reference xPLeft( + new primitive2d::PolygonStrokeArrowPrimitive2D( + aLeft, rStrokeArrowPrimitive.getLineAttribute(), + rStrokeArrowPrimitive.getStrokeAttribute(), rStrokeArrowPrimitive.getStart(), + aEmpty)); + rtl::Reference xPRight( + new primitive2d::PolygonStrokeArrowPrimitive2D( + aRight, rStrokeArrowPrimitive.getLineAttribute(), + rStrokeArrowPrimitive.getStrokeAttribute(), aEmpty, + rStrokeArrowPrimitive.getEnd())); + + processBasePrimitive2D(*xPLeft); + processBasePrimitive2D(*xPRight); + } + else + { + // support SvtGraphicStroke MetaCommentAction + std::unique_ptr pSvtGraphicStroke = impTryToCreateSvtGraphicStroke( + rBasePolygon, nullptr, &rStrokeArrowPrimitive.getLineAttribute(), + &rStrokeArrowPrimitive.getStrokeAttribute(), &rStrokeArrowPrimitive.getStart(), + &rStrokeArrowPrimitive.getEnd()); + + // write LineGeometry start marker + impStartSvtGraphicStroke(pSvtGraphicStroke.get()); + + // #i116162# When B&W is set as DrawMode, DrawModeFlags::WhiteFill is used + // to let all fills be just white; for lines DrawModeFlags::BlackLine is used + // so all line geometry is supposed to get black. Since in the in-between + // stages of line geometry drawing filled polygons are used (e.g. line + // start/ends) it is necessary to change these drawmodes to preserve + // that lines shall be black; thus change DrawModeFlags::WhiteFill to + // DrawModeFlags::BlackFill during line geometry processing to have line geometry + // parts filled black. + const DrawModeFlags nOldDrawMode(mpOutputDevice->GetDrawMode()); + const bool bDrawmodeChange(nOldDrawMode & DrawModeFlags::WhiteFill + && mnSvtGraphicStrokeCount); + + if (bDrawmodeChange) + { + mpOutputDevice->SetDrawMode((nOldDrawMode & ~DrawModeFlags::WhiteFill) + | DrawModeFlags::BlackFill); + } + + // process sub-line geometry (evtl. filled PolyPolygons) + process(rStrokeArrowPrimitive); + + if (bDrawmodeChange) + { + mpOutputDevice->SetDrawMode(nOldDrawMode); + } + + // write LineGeometry end marker + impEndSvtGraphicStroke(pSvtGraphicStroke.get()); + } +} + +void VclMetafileProcessor2D::processPolyPolygonGraphicPrimitive2D( + const primitive2d::PolyPolygonGraphicPrimitive2D& rBitmapCandidate) +{ + // need to handle PolyPolygonGraphicPrimitive2D here to support XPATHFILL_SEQ_BEGIN/XPATHFILL_SEQ_END + basegfx::B2DPolyPolygon aLocalPolyPolygon(rBitmapCandidate.getB2DPolyPolygon()); + + if (!rBitmapCandidate.getDefinitionRange().isEmpty() + && aLocalPolyPolygon.getB2DRange() != rBitmapCandidate.getDefinitionRange()) + { + // The range which defines the bitmap fill is defined and different from the + // range of the defining geometry (e.g. used for FillStyle UseSlideBackground). + // This cannot be done calling vcl, thus use decomposition here directly + process(rBitmapCandidate); + return; + } + + fillPolyPolygonNeededToBeSplit(aLocalPolyPolygon); + + std::unique_ptr pSvtGraphicFill; + + if (!mnSvtGraphicFillCount && aLocalPolyPolygon.count()) + { + // #121194# Changed implementation and checked usages of convert to metafile, + // presentation start (uses SvtGraphicFill) and printing. + + // calculate transformation. Get real object size, all values in FillGraphicAttribute + // are relative to the unified object + aLocalPolyPolygon.transform(maCurrentTransformation); + const basegfx::B2DVector aOutlineSize(aLocalPolyPolygon.getB2DRange().getRange()); + + // the scaling needs scale from pixel to logic coordinate system + const attribute::FillGraphicAttribute& rFillGraphicAttribute + = rBitmapCandidate.getFillGraphic(); + const Size aBmpSizePixel(rFillGraphicAttribute.getGraphic().GetSizePixel()); + + // setup transformation like in impgrfll. Multiply with aOutlineSize + // to get from unit coordinates in rFillGraphicAttribute.getGraphicRange() + // to object coordinates with object's top left being at (0,0). Divide + // by pixel size so that scale from pixel to logic will work in SvtGraphicFill. + const basegfx::B2DVector aTransformScale( + rFillGraphicAttribute.getGraphicRange().getRange() + / basegfx::B2DVector(std::max(1.0, double(aBmpSizePixel.Width())), + std::max(1.0, double(aBmpSizePixel.Height()))) + * aOutlineSize); + const basegfx::B2DPoint aTransformPosition( + rFillGraphicAttribute.getGraphicRange().getMinimum() * aOutlineSize); + + // setup transformation like in impgrfll + SvtGraphicFill::Transform aTransform; + + // scale values are divided by bitmap pixel sizes + aTransform.matrix[0] = aTransformScale.getX(); + aTransform.matrix[4] = aTransformScale.getY(); + + // translates are absolute + aTransform.matrix[2] = aTransformPosition.getX(); + aTransform.matrix[5] = aTransformPosition.getY(); + + pSvtGraphicFill.reset(new SvtGraphicFill( + getFillPolyPolygon(aLocalPolyPolygon), Color(), 0.0, SvtGraphicFill::fillEvenOdd, + SvtGraphicFill::fillTexture, aTransform, rFillGraphicAttribute.getTiling(), + SvtGraphicFill::hatchSingle, Color(), SvtGraphicFill::GradientType::Linear, Color(), + Color(), 0, rFillGraphicAttribute.getGraphic())); + } + + // Do use decomposition; encapsulate with SvtGraphicFill + impStartSvtGraphicFill(pSvtGraphicFill.get()); + process(rBitmapCandidate); + impEndSvtGraphicFill(pSvtGraphicFill.get()); +} + +void VclMetafileProcessor2D::processPolyPolygonHatchPrimitive2D( + const primitive2d::PolyPolygonHatchPrimitive2D& rHatchCandidate) +{ + // need to handle PolyPolygonHatchPrimitive2D here to support XPATHFILL_SEQ_BEGIN/XPATHFILL_SEQ_END + const attribute::FillHatchAttribute& rFillHatchAttribute = rHatchCandidate.getFillHatch(); + basegfx::B2DPolyPolygon aLocalPolyPolygon(rHatchCandidate.getB2DPolyPolygon()); + + if (aLocalPolyPolygon.getB2DRange() != rHatchCandidate.getDefinitionRange()) + { + // the range which defines the hatch is different from the range of the + // geometry (used for writer frames). This cannot be done calling vcl, thus use + // decomposition here + process(rHatchCandidate); + return; + } + + // #i112245# Metafiles use tools Polygon and are not able to have more than 65535 points + // per polygon. Split polygon until there are less than that + fillPolyPolygonNeededToBeSplit(aLocalPolyPolygon); + + if (rFillHatchAttribute.isFillBackground()) + { + // with fixing #i111954# (see below) the possible background + // fill of a hatched object was lost.Generate a background fill + // primitive and render it + const primitive2d::Primitive2DReference xBackground( + new primitive2d::PolyPolygonColorPrimitive2D(aLocalPolyPolygon, + rHatchCandidate.getBackgroundColor())); + + process(primitive2d::Primitive2DContainer{ xBackground }); + } + + std::unique_ptr pSvtGraphicFill; + aLocalPolyPolygon.transform(maCurrentTransformation); + + if (!mnSvtGraphicFillCount && aLocalPolyPolygon.count()) + { + // re-create a VCL hatch as base data + SvtGraphicFill::HatchType eHatch(SvtGraphicFill::hatchSingle); + + switch (rFillHatchAttribute.getStyle()) + { + default: // attribute::HatchStyle::Single : + { + eHatch = SvtGraphicFill::hatchSingle; + break; + } + case attribute::HatchStyle::Double: + { + eHatch = SvtGraphicFill::hatchDouble; + break; + } + case attribute::HatchStyle::Triple: + { + eHatch = SvtGraphicFill::hatchTriple; + break; + } + } + + SvtGraphicFill::Transform aTransform; + + // scale + aTransform.matrix[0] *= rFillHatchAttribute.getDistance(); + aTransform.matrix[4] *= rFillHatchAttribute.getDistance(); + + // rotate (was never correct in impgrfll anyways, use correct angle now) + aTransform.matrix[0] *= cos(rFillHatchAttribute.getAngle()); + aTransform.matrix[1] *= -sin(rFillHatchAttribute.getAngle()); + aTransform.matrix[3] *= sin(rFillHatchAttribute.getAngle()); + aTransform.matrix[4] *= cos(rFillHatchAttribute.getAngle()); + + pSvtGraphicFill.reset(new SvtGraphicFill( + getFillPolyPolygon(aLocalPolyPolygon), Color(), 0.0, SvtGraphicFill::fillEvenOdd, + SvtGraphicFill::fillHatch, aTransform, false, eHatch, + Color(maBColorModifierStack.getModifiedColor(rFillHatchAttribute.getColor())), + SvtGraphicFill::GradientType::Linear, Color(), Color(), 0, Graphic())); + } + + // Do use decomposition; encapsulate with SvtGraphicFill + impStartSvtGraphicFill(pSvtGraphicFill.get()); + + // #i111954# do NOT use decomposition, but use direct VCL-command + // process(rCandidate.get2DDecomposition(getViewInformation2D())); + const tools::PolyPolygon aToolsPolyPolygon( + basegfx::utils::adaptiveSubdivideByAngle(aLocalPolyPolygon)); + const HatchStyle aHatchStyle( + attribute::HatchStyle::Single == rFillHatchAttribute.getStyle() + ? HatchStyle::Single + : attribute::HatchStyle::Double == rFillHatchAttribute.getStyle() ? HatchStyle::Double + : HatchStyle::Triple); + + mpOutputDevice->DrawHatch( + aToolsPolyPolygon, + Hatch(aHatchStyle, + Color(maBColorModifierStack.getModifiedColor(rFillHatchAttribute.getColor())), + basegfx::fround(rFillHatchAttribute.getDistance()), + Degree10(basegfx::fround(basegfx::rad2deg<10>(rFillHatchAttribute.getAngle()))))); + + impEndSvtGraphicFill(pSvtGraphicFill.get()); +} + +void VclMetafileProcessor2D::processPolyPolygonGradientPrimitive2D( + const primitive2d::PolyPolygonGradientPrimitive2D& rGradientCandidate) +{ + basegfx::B2DVector aScale, aTranslate; + double fRotate, fShearX; + + maCurrentTransformation.decompose(aScale, aTranslate, fRotate, fShearX); + + if (!basegfx::fTools::equalZero(fRotate) || !basegfx::fTools::equalZero(fShearX)) + { + // #i121185# When rotation or shear is used, a VCL Gradient cannot be used directly. + // This is because VCL Gradient mechanism does *not* support to rotate the gradient + // with objects and this case is not expressible in a Metafile (and cannot be added + // since the FileFormats used, e.g. *.wmf, do not support it either). + // Such cases happen when a graphic object uses a Metafile as graphic information or + // a fill style definition uses a Metafile. In this cases the graphic content is + // rotated with the graphic or filled object; this is not supported by the target + // format of this conversion renderer - Metafiles. + // To solve this, not a Gradient is written, but the decomposition of this object + // is written to the Metafile. This is the PolyPolygons building the gradient fill. + // These will need more space and time, but the result will be as if the Gradient + // was rotated with the object. + // This mechanism is used by all exporters still not using Primitives (e.g. Print, + // Slideshow, Export rto PDF, export to Picture, ...) but relying on Metafile + // transfers. One more reason to *change* these to primitives. + // BTW: One more example how useful the principles of primitives are; the decomposition + // is by definition a simpler, maybe more expensive representation of the same content. + process(rGradientCandidate); + return; + } + + basegfx::B2DPolyPolygon aLocalPolyPolygon(rGradientCandidate.getB2DPolyPolygon()); + + if (aLocalPolyPolygon.getB2DRange() != rGradientCandidate.getDefinitionRange()) + { + // the range which defines the gradient is different from the range of the + // geometry (used for writer frames). This cannot be done calling vcl, thus use + // decomposition here + process(rGradientCandidate); + return; + } + + // #i112245# Metafiles use tools Polygon and are not able to have more than 65535 points + // per polygon. Split polygon until there are less than that + fillPolyPolygonNeededToBeSplit(aLocalPolyPolygon); + + // for support of MetaCommentActions of the form XGRAD_SEQ_BEGIN, XGRAD_SEQ_END + // it is safest to use the VCL OutputDevice::DrawGradient method which creates those. + // re-create a VCL-gradient from FillGradientPrimitive2D and the needed tools PolyPolygon + Gradient aVCLGradient; + impConvertFillGradientAttributeToVCLGradient(aVCLGradient, rGradientCandidate.getFillGradient(), + false); + aLocalPolyPolygon.transform(maCurrentTransformation); + + // #i82145# ATM VCL printing of gradients using curved shapes does not work, + // i submitted the bug with the given ID to THB. When that task is fixed it is + // necessary to again remove this subdivision since it decreases possible + // printing quality (not even resolution-dependent for now). THB will tell + // me when that task is fixed in the master + const tools::PolyPolygon aToolsPolyPolygon( + getFillPolyPolygon(basegfx::utils::adaptiveSubdivideByAngle(aLocalPolyPolygon))); + + // XPATHFILL_SEQ_BEGIN/XPATHFILL_SEQ_END support + std::unique_ptr pSvtGraphicFill; + + if (!mnSvtGraphicFillCount && aLocalPolyPolygon.count()) + { + // setup gradient stuff like in impgrfll + SvtGraphicFill::GradientType eGrad(SvtGraphicFill::GradientType::Linear); + + switch (aVCLGradient.GetStyle()) + { + default: // GradientStyle::Linear: + case GradientStyle::Axial: + eGrad = SvtGraphicFill::GradientType::Linear; + break; + case GradientStyle::Radial: + case GradientStyle::Elliptical: + eGrad = SvtGraphicFill::GradientType::Radial; + break; + case GradientStyle::Square: + case GradientStyle::Rect: + eGrad = SvtGraphicFill::GradientType::Rectangular; + break; + } + + pSvtGraphicFill.reset(new SvtGraphicFill( + aToolsPolyPolygon, Color(), 0.0, SvtGraphicFill::fillEvenOdd, + SvtGraphicFill::fillGradient, SvtGraphicFill::Transform(), false, + SvtGraphicFill::hatchSingle, Color(), eGrad, aVCLGradient.GetStartColor(), + aVCLGradient.GetEndColor(), aVCLGradient.GetSteps(), Graphic())); + } + + // call VCL directly; encapsulate with SvtGraphicFill + impStartSvtGraphicFill(pSvtGraphicFill.get()); + mpOutputDevice->DrawGradient(aToolsPolyPolygon, aVCLGradient); + impEndSvtGraphicFill(pSvtGraphicFill.get()); +} + +void VclMetafileProcessor2D::processPolyPolygonColorPrimitive2D( + const primitive2d::PolyPolygonColorPrimitive2D& rPolygonCandidate) +{ + mpOutputDevice->Push(vcl::PushFlags::LINECOLOR | vcl::PushFlags::FILLCOLOR); + basegfx::B2DPolyPolygon aLocalPolyPolygon(rPolygonCandidate.getB2DPolyPolygon()); + + // #i112245# Metafiles use tools Polygon and are not able to have more than 65535 points + // per polygon. Split polygon until there are less than that + fillPolyPolygonNeededToBeSplit(aLocalPolyPolygon); + + const basegfx::BColor aPolygonColor( + maBColorModifierStack.getModifiedColor(rPolygonCandidate.getBColor())); + aLocalPolyPolygon.transform(maCurrentTransformation); + + // set line and fill color + mpOutputDevice->SetFillColor(Color(aPolygonColor)); + mpOutputDevice->SetLineColor(); + + mpOutputDevice->DrawPolyPolygon(aLocalPolyPolygon); + + mpOutputDevice->Pop(); +} + +void VclMetafileProcessor2D::processMaskPrimitive2D( + const primitive2d::MaskPrimitive2D& rMaskCandidate) +{ + // mask group. Special handling for MetaFiles. + if (rMaskCandidate.getChildren().empty()) + return; + + basegfx::B2DPolyPolygon aMask(rMaskCandidate.getMask()); + + if (aMask.count()) + { + // prepare new mask polygon and rescue current one + aMask.transform(maCurrentTransformation); + const basegfx::B2DPolyPolygon aLastClipPolyPolygon(maClipPolyPolygon); + + if (maClipPolyPolygon.count()) + { + // there is already a clip polygon set; build clipped union of + // current mask polygon and new one + maClipPolyPolygon = basegfx::utils::clipPolyPolygonOnPolyPolygon( + aMask, maClipPolyPolygon, + true, // #i106516# we want the inside of aMask, not the outside + false); + } + else + { + // use mask directly + maClipPolyPolygon = aMask; + } + + if (maClipPolyPolygon.count()) + { + // set VCL clip region; subdivide before conversion to tools polygon. Subdivision necessary (!) + // Removed subdivision and fixed in vcl::Region::ImplPolyPolyRegionToBandRegionFunc() in VCL where + // the ClipRegion is built from the Polygon. An AdaptiveSubdivide on the source polygon was missing there + mpOutputDevice->Push(vcl::PushFlags::CLIPREGION); + mpOutputDevice->SetClipRegion(vcl::Region(maClipPolyPolygon)); + + // recursively paint content + // #i121267# Only need to process sub-content when clip polygon is *not* empty. + // If it is empty, the clip is empty and there can be nothing inside. + process(rMaskCandidate.getChildren()); + + // restore VCL clip region + mpOutputDevice->Pop(); + } + + // restore to rescued clip polygon + maClipPolyPolygon = aLastClipPolyPolygon; + } + else + { + // no mask, no clipping. recursively paint content + process(rMaskCandidate.getChildren()); + } +} + +void VclMetafileProcessor2D::processUnifiedTransparencePrimitive2D( + const primitive2d::UnifiedTransparencePrimitive2D& rUniTransparenceCandidate) +{ + mpOutputDevice->Push(vcl::PushFlags::LINECOLOR | vcl::PushFlags::FILLCOLOR); + // for metafile: Need to examine what the pure vcl version is doing here actually + // - uses DrawTransparent with metafile for content and a gradient + // - uses DrawTransparent for single PolyPolygons directly. Can be detected by + // checking the content for single PolyPolygonColorPrimitive2D + const primitive2d::Primitive2DContainer& rContent = rUniTransparenceCandidate.getChildren(); + + if (!rContent.empty()) + { + if (0.0 == rUniTransparenceCandidate.getTransparence()) + { + // not transparent at all, use content + process(rUniTransparenceCandidate.getChildren()); + } + else if (rUniTransparenceCandidate.getTransparence() > 0.0 + && rUniTransparenceCandidate.getTransparence() < 1.0) + { + // try to identify a single PolyPolygonColorPrimitive2D in the + // content part of the transparence primitive + const primitive2d::PolyPolygonColorPrimitive2D* pPoPoColor = nullptr; + static bool bForceToMetafile(false); // loplugin:constvars:ignore + + if (!bForceToMetafile && 1 == rContent.size()) + { + const primitive2d::Primitive2DReference xReference(rContent[0]); + pPoPoColor = dynamic_cast( + xReference.get()); + } + + // PolyPolygonGradientPrimitive2D, PolyPolygonHatchPrimitive2D and + // PolyPolygonGraphicPrimitive2D are derived from PolyPolygonColorPrimitive2D. + // Check also for correct ID to exclude derived implementations + if (pPoPoColor + && PRIMITIVE2D_ID_POLYPOLYGONCOLORPRIMITIVE2D == pPoPoColor->getPrimitive2DID()) + { + // single transparent tools::PolyPolygon identified, use directly + const basegfx::BColor aPolygonColor( + maBColorModifierStack.getModifiedColor(pPoPoColor->getBColor())); + basegfx::B2DPolyPolygon aLocalPolyPolygon(pPoPoColor->getB2DPolyPolygon()); + + // #i112245# Metafiles use tools Polygon and are not able to have more than 65535 points + // per polygon. Split polygon until there are less than that + fillPolyPolygonNeededToBeSplit(aLocalPolyPolygon); + + // now transform + aLocalPolyPolygon.transform(maCurrentTransformation); + + // set line and fill color + const sal_uInt16 nTransPercentVcl(static_cast( + basegfx::fround(rUniTransparenceCandidate.getTransparence() * 100.0))); + mpOutputDevice->SetFillColor(Color(aPolygonColor)); + mpOutputDevice->SetLineColor(); + + mpOutputDevice->DrawTransparent(tools::PolyPolygon(aLocalPolyPolygon), + nTransPercentVcl); + } + else + { + // save old mfCurrentUnifiedTransparence and set new one + // so that contained SvtGraphicStroke may use the current one + const double fLastCurrentUnifiedTransparence(mfCurrentUnifiedTransparence); + // #i105377# paint the content metafile opaque as the transparency gets + // split of into the gradient below + // mfCurrentUnifiedTransparence = rUniTransparenceCandidate.getTransparence(); + mfCurrentUnifiedTransparence = 0; + + // various content, create content-metafile + GDIMetaFile aContentMetafile; + const tools::Rectangle aPrimitiveRectangle( + impDumpToMetaFile(rContent, aContentMetafile)); + + // restore mfCurrentUnifiedTransparence; it may have been used + // while processing the sub-content in impDumpToMetaFile + mfCurrentUnifiedTransparence = fLastCurrentUnifiedTransparence; + + // create uniform VCL gradient for uniform transparency + Gradient aVCLGradient; + const sal_uInt8 nTransPercentVcl(static_cast( + basegfx::fround(rUniTransparenceCandidate.getTransparence() * 255.0))); + const Color aTransColor(nTransPercentVcl, nTransPercentVcl, nTransPercentVcl); + + aVCLGradient.SetStyle(GradientStyle::Linear); + aVCLGradient.SetStartColor(aTransColor); + aVCLGradient.SetEndColor(aTransColor); + aVCLGradient.SetAngle(0_deg10); + aVCLGradient.SetBorder(0); + aVCLGradient.SetOfsX(0); + aVCLGradient.SetOfsY(0); + aVCLGradient.SetStartIntensity(100); + aVCLGradient.SetEndIntensity(100); + aVCLGradient.SetSteps(2); + + // render it to VCL + mpOutputDevice->DrawTransparent(aContentMetafile, aPrimitiveRectangle.TopLeft(), + aPrimitiveRectangle.GetSize(), aVCLGradient); + } + } + } + + mpOutputDevice->Pop(); +} + +void VclMetafileProcessor2D::processTransparencePrimitive2D( + const primitive2d::TransparencePrimitive2D& rTransparenceCandidate) +{ + // for metafile: Need to examine what the pure vcl version is doing here actually + // - uses DrawTransparent with metafile for content and a gradient + // i can detect this here with checking the gradient part for a single + // FillGradientPrimitive2D and reconstruct the gradient. + // If that detection goes wrong, I have to create a transparence-blended bitmap. Eventually + // do that in stripes, else RenderTransparencePrimitive2D may just be used + const primitive2d::Primitive2DContainer& rContent = rTransparenceCandidate.getChildren(); + const primitive2d::Primitive2DContainer& rTransparence + = rTransparenceCandidate.getTransparence(); + + if (rContent.empty() || rTransparence.empty()) + return; + + // try to identify a single FillGradientPrimitive2D in the + // transparence part of the primitive + const primitive2d::FillGradientPrimitive2D* pFiGradient = nullptr; + static bool bForceToBigTransparentVDev(false); // loplugin:constvars:ignore + + if (!bForceToBigTransparentVDev && 1 == rTransparence.size()) + { + const primitive2d::Primitive2DReference xReference(rTransparence[0]); + pFiGradient = dynamic_cast(xReference.get()); + } + + // Check also for correct ID to exclude derived implementations + if (pFiGradient && PRIMITIVE2D_ID_FILLGRADIENTPRIMITIVE2D == pFiGradient->getPrimitive2DID()) + { + // various content, create content-metafile + GDIMetaFile aContentMetafile; + const tools::Rectangle aPrimitiveRectangle(impDumpToMetaFile(rContent, aContentMetafile)); + + // re-create a VCL-gradient from FillGradientPrimitive2D + Gradient aVCLGradient; + impConvertFillGradientAttributeToVCLGradient(aVCLGradient, pFiGradient->getFillGradient(), + true); + + // render it to VCL + mpOutputDevice->DrawTransparent(aContentMetafile, aPrimitiveRectangle.TopLeft(), + aPrimitiveRectangle.GetSize(), aVCLGradient); + } + else + { + // sub-transparence group. Draw to VDev first. + // this may get refined to tiling when resolution is too big here + + // need to avoid switching off MapMode stuff here; maybe need another + // tooling class, cannot just do the same as with the pixel renderer. + // Need to experiment... + + // Okay, basic implementation finished and tested. The DPI stuff was hard + // and not easy to find out that it's needed. + // Since this will not yet happen normally (as long as no one constructs + // transparence primitives with non-trivial transparence content) i will for now not + // refine to tiling here. + + basegfx::B2DRange aViewRange(rContent.getB2DRange(getViewInformation2D())); + aViewRange.transform(maCurrentTransformation); + const tools::Rectangle aRectLogic(static_cast(floor(aViewRange.getMinX())), + static_cast(floor(aViewRange.getMinY())), + static_cast(ceil(aViewRange.getMaxX())), + static_cast(ceil(aViewRange.getMaxY()))); + const tools::Rectangle aRectPixel(mpOutputDevice->LogicToPixel(aRectLogic)); + Size aSizePixel(aRectPixel.GetSize()); + ScopedVclPtrInstance aBufferDevice; + const sal_uInt32 nMaxSquarePixels(500000); + const sal_uInt32 nViewVisibleArea(aSizePixel.getWidth() * aSizePixel.getHeight()); + double fReduceFactor(1.0); + + if (nViewVisibleArea > nMaxSquarePixels) + { + // reduce render size + fReduceFactor = sqrt(double(nMaxSquarePixels) / static_cast(nViewVisibleArea)); + aSizePixel = Size( + basegfx::fround(static_cast(aSizePixel.getWidth()) * fReduceFactor), + basegfx::fround(static_cast(aSizePixel.getHeight()) * fReduceFactor)); + } + + if (aBufferDevice->SetOutputSizePixel(aSizePixel)) + { + // create and set MapModes for target devices + MapMode aNewMapMode(mpOutputDevice->GetMapMode()); + aNewMapMode.SetOrigin(Point(-aRectLogic.Left(), -aRectLogic.Top())); + aBufferDevice->SetMapMode(aNewMapMode); + + // prepare view transformation for target renderers + // ATTENTION! Need to apply another scaling because of the potential DPI differences + // between Printer and VDev (mpOutputDevice and aBufferDevice here). + // To get the DPI, LogicToPixel from (1,1) from MapUnit::MapInch needs to be used. + basegfx::B2DHomMatrix aViewTransform(aBufferDevice->GetViewTransformation()); + const Size aDPIOld(mpOutputDevice->LogicToPixel(Size(1, 1), MapMode(MapUnit::MapInch))); + const Size aDPINew(aBufferDevice->LogicToPixel(Size(1, 1), MapMode(MapUnit::MapInch))); + const double fDPIXChange(static_cast(aDPIOld.getWidth()) + / static_cast(aDPINew.getWidth())); + const double fDPIYChange(static_cast(aDPIOld.getHeight()) + / static_cast(aDPINew.getHeight())); + + if (!basegfx::fTools::equal(fDPIXChange, 1.0) + || !basegfx::fTools::equal(fDPIYChange, 1.0)) + { + aViewTransform.scale(fDPIXChange, fDPIYChange); + } + + // also take scaling from Size reduction into account + if (!basegfx::fTools::equal(fReduceFactor, 1.0)) + { + aViewTransform.scale(fReduceFactor, fReduceFactor); + } + + // create view information and pixel renderer. Reuse known ViewInformation + // except new transformation and range + const geometry::ViewInformation2D aViewInfo( + getViewInformation2D().getObjectTransformation(), aViewTransform, aViewRange, + getViewInformation2D().getVisualizedPage(), getViewInformation2D().getViewTime()); + + VclPixelProcessor2D aBufferProcessor(aViewInfo, *aBufferDevice); + + // draw content using pixel renderer + const Point aEmptyPoint; + aBufferProcessor.process(rContent); + const Bitmap aBmContent(aBufferDevice->GetBitmap(aEmptyPoint, aSizePixel)); + + // draw transparence using pixel renderer + aBufferDevice->Erase(); + aBufferProcessor.process(rTransparence); + const AlphaMask aBmAlpha(aBufferDevice->GetBitmap(aEmptyPoint, aSizePixel)); + + // paint + mpOutputDevice->DrawBitmapEx(aRectLogic.TopLeft(), aRectLogic.GetSize(), + BitmapEx(aBmContent, aBmAlpha)); + } + } +} + +void VclMetafileProcessor2D::processStructureTagPrimitive2D( + const primitive2d::StructureTagPrimitive2D& rStructureTagCandidate) +{ + ::comphelper::ValueRestorationGuard const g(mpCurrentStructureTag, &rStructureTagCandidate); + + // structured tag primitive + const vcl::PDFWriter::StructElement& rTagElement(rStructureTagCandidate.getStructureElement()); + bool bTagUsed((vcl::PDFWriter::NonStructElement != rTagElement)); + sal_Int32 nPreviousElement(-1); + + if (!rStructureTagCandidate.isTaggedSdrObject()) + { + bTagUsed = false; + } + + if (mpPDFExtOutDevData && bTagUsed) + { + // foreground object: tag as regular structure element + if (!rStructureTagCandidate.isBackground()) + { + if (rStructureTagCandidate.GetAnchorStructureElementId() != -1) + { + auto const nTemp = mpPDFExtOutDevData->GetCurrentStructureElement(); + bool const bSuccess = mpPDFExtOutDevData->SetCurrentStructureElement( + rStructureTagCandidate.GetAnchorStructureElementId()); + if (bSuccess) + { + nPreviousElement = nTemp; + } + else + { + SAL_WARN("drawinglayer", "anchor structure element not found?"); + } + } + mpPDFExtOutDevData->BeginStructureElement(rTagElement); + switch (rTagElement) + { + case vcl::PDFWriter::H1: + case vcl::PDFWriter::H2: + case vcl::PDFWriter::H3: + case vcl::PDFWriter::H4: + case vcl::PDFWriter::H5: + case vcl::PDFWriter::H6: + case vcl::PDFWriter::Paragraph: + case vcl::PDFWriter::Heading: + case vcl::PDFWriter::Caption: + case vcl::PDFWriter::BlockQuote: + case vcl::PDFWriter::Table: + case vcl::PDFWriter::TableRow: + case vcl::PDFWriter::Formula: + case vcl::PDFWriter::Figure: + mpPDFExtOutDevData->SetStructureAttribute(vcl::PDFWriter::Placement, + vcl::PDFWriter::Block); + break; + case vcl::PDFWriter::TableData: + case vcl::PDFWriter::TableHeader: + mpPDFExtOutDevData->SetStructureAttribute(vcl::PDFWriter::Placement, + vcl::PDFWriter::Inline); + break; + default: + break; + } + switch (rTagElement) + { + case vcl::PDFWriter::Table: + case vcl::PDFWriter::Formula: + case vcl::PDFWriter::Figure: + { + auto const range(rStructureTagCandidate.getB2DRange(getViewInformation2D())); + tools::Rectangle const aLogicRect( + basegfx::fround(range.getMinX()), basegfx::fround(range.getMinY()), + basegfx::fround(range.getMaxX()), basegfx::fround(range.getMaxY())); + mpPDFExtOutDevData->SetStructureBoundingBox(aLogicRect); + break; + } + default: + break; + } + if (rTagElement == vcl::PDFWriter::TableHeader) + { + mpPDFExtOutDevData->SetStructureAttribute(vcl::PDFWriter::Scope, + vcl::PDFWriter::Column); + } + } + // background object + else + { + // background image: tag as artifact + if (rStructureTagCandidate.isImage()) + mpPDFExtOutDevData->BeginStructureElement(vcl::PDFWriter::NonStructElement); + // any other background object: do not tag + else + assert(false); + } + } + + // process children normally + process(rStructureTagCandidate.getChildren()); + + if (mpPDFExtOutDevData && bTagUsed) + { + // write end tag + mpPDFExtOutDevData->EndStructureElement(); + if (nPreviousElement != -1) + { +#ifndef NDEBUG + bool const bSuccess = +#endif + mpPDFExtOutDevData->SetCurrentStructureElement(nPreviousElement); + assert(bSuccess); + } + } +} + +VclPtr +VclMetafileProcessor2D::CreateBufferDevice(const basegfx::B2DRange& rCandidateRange, + geometry::ViewInformation2D& rViewInfo, + tools::Rectangle& rRectLogic, Size& rSizePixel) const +{ + constexpr double fMaxSquarePixels = 500000; + basegfx::B2DRange aViewRange(rCandidateRange); + aViewRange.transform(maCurrentTransformation); + rRectLogic = tools::Rectangle(static_cast(std::floor(aViewRange.getMinX())), + static_cast(std::floor(aViewRange.getMinY())), + static_cast(std::ceil(aViewRange.getMaxX())), + static_cast(std::ceil(aViewRange.getMaxY()))); + const tools::Rectangle aRectPixel(mpOutputDevice->LogicToPixel(rRectLogic)); + rSizePixel = aRectPixel.GetSize(); + const double fViewVisibleArea(rSizePixel.getWidth() * rSizePixel.getHeight()); + double fReduceFactor(1.0); + + if (fViewVisibleArea > fMaxSquarePixels) + { + // reduce render size + fReduceFactor = sqrt(fMaxSquarePixels / fViewVisibleArea); + rSizePixel = Size(basegfx::fround(rSizePixel.getWidth() * fReduceFactor), + basegfx::fround(rSizePixel.getHeight() * fReduceFactor)); + } + + VclPtrInstance pBufferDevice(DeviceFormat::DEFAULT, DeviceFormat::DEFAULT); + if (pBufferDevice->SetOutputSizePixel(rSizePixel)) + { + // create and set MapModes for target devices + MapMode aNewMapMode(mpOutputDevice->GetMapMode()); + aNewMapMode.SetOrigin(Point(-rRectLogic.Left(), -rRectLogic.Top())); + pBufferDevice->SetMapMode(aNewMapMode); + + // prepare view transformation for target renderers + // ATTENTION! Need to apply another scaling because of the potential DPI differences + // between Printer and VDev (mpOutputDevice and pBufferDevice here). + // To get the DPI, LogicToPixel from (1,1) from MapUnit::MapInch needs to be used. + basegfx::B2DHomMatrix aViewTransform(pBufferDevice->GetViewTransformation()); + const Size aDPIOld(mpOutputDevice->LogicToPixel(Size(1, 1), MapMode(MapUnit::MapInch))); + const Size aDPINew(pBufferDevice->LogicToPixel(Size(1, 1), MapMode(MapUnit::MapInch))); + const double fDPIXChange(static_cast(aDPIOld.getWidth()) + / static_cast(aDPINew.getWidth())); + const double fDPIYChange(static_cast(aDPIOld.getHeight()) + / static_cast(aDPINew.getHeight())); + + if (!basegfx::fTools::equal(fDPIXChange, 1.0) || !basegfx::fTools::equal(fDPIYChange, 1.0)) + { + aViewTransform.scale(fDPIXChange, fDPIYChange); + } + + // also take scaling from Size reduction into account + if (!basegfx::fTools::equal(fReduceFactor, 1.0)) + { + aViewTransform.scale(fReduceFactor, fReduceFactor); + } + + // create view information and pixel renderer. Reuse known ViewInformation + // except new transformation and range + rViewInfo = geometry::ViewInformation2D( + getViewInformation2D().getObjectTransformation(), aViewTransform, aViewRange, + getViewInformation2D().getVisualizedPage(), getViewInformation2D().getViewTime()); + } + else + pBufferDevice.disposeAndClear(); + +#if HAVE_P1155R3 + return pBufferDevice; +#else + return std::move(pBufferDevice); +#endif +} + +void VclMetafileProcessor2D::processPrimitive2DOnPixelProcessor( + const primitive2d::BasePrimitive2D& rCandidate) +{ + basegfx::B2DRange aViewRange(rCandidate.getB2DRange(getViewInformation2D())); + geometry::ViewInformation2D aViewInfo; + tools::Rectangle aRectLogic; + Size aSizePixel; + auto pBufferDevice(CreateBufferDevice(aViewRange, aViewInfo, aRectLogic, aSizePixel)); + if (pBufferDevice) + { + VclPixelProcessor2D aBufferProcessor(aViewInfo, *pBufferDevice, maBColorModifierStack); + + // draw content using pixel renderer + primitive2d::Primitive2DReference aRef( + &const_cast(rCandidate)); + aBufferProcessor.process({ aRef }); + const BitmapEx aBmContent(pBufferDevice->GetBitmapEx(Point(), aSizePixel)); + mpOutputDevice->DrawBitmapEx(aRectLogic.TopLeft(), aRectLogic.GetSize(), aBmContent); + + // aBufferProcessor dtor pops state off pBufferDevice pushed on by its ctor, let + // pBufferDevice live past aBufferProcessor scope to avoid warnings + } + pBufferDevice.disposeAndClear(); +} + +} // end of namespace + +/* vim:set shiftwidth=4 softtabstop=4 expandtab: */ -- cgit v1.2.3