From ed5640d8b587fbcfed7dd7967f3de04b37a76f26 Mon Sep 17 00:00:00 2001
From: Daniel Baumann <daniel.baumann@progress-linux.org>
Date: Sun, 7 Apr 2024 11:06:44 +0200
Subject: Adding upstream version 4:7.4.7.

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
---
 svx/source/engine3d/cube3d.cxx | 153 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 153 insertions(+)
 create mode 100644 svx/source/engine3d/cube3d.cxx

(limited to 'svx/source/engine3d/cube3d.cxx')

diff --git a/svx/source/engine3d/cube3d.cxx b/svx/source/engine3d/cube3d.cxx
new file mode 100644
index 000000000..020d4c85e
--- /dev/null
+++ b/svx/source/engine3d/cube3d.cxx
@@ -0,0 +1,153 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+
+#include <svx/strings.hrc>
+#include <svx/deflt3d.hxx>
+#include <svx/dialmgr.hxx>
+#include <svx/cube3d.hxx>
+#include <svx/svdobjkind.hxx>
+#include <basegfx/point/b3dpoint.hxx>
+#include <sdr/contact/viewcontactofe3dcube.hxx>
+
+
+// DrawContact section
+
+std::unique_ptr<sdr::contact::ViewContact> E3dCubeObj::CreateObjectSpecificViewContact()
+{
+    return std::make_unique<sdr::contact::ViewContactOfE3dCube>(*this);
+}
+
+
+E3dCubeObj::E3dCubeObj(
+    SdrModel& rSdrModel,
+    const E3dDefaultAttributes& rDefault,
+    const basegfx::B3DPoint& aPos,
+    const basegfx::B3DVector& r3DSize)
+:   E3dCompoundObject(rSdrModel)
+{
+    // Set Defaults
+    SetDefaultAttributes(rDefault);
+
+    // position centre or left, bottom, back (dependent on bPosIsCenter)
+    aCubePos = aPos;
+    aCubeSize = r3DSize;
+}
+
+E3dCubeObj::E3dCubeObj(SdrModel& rSdrModel)
+:   E3dCompoundObject(rSdrModel)
+{
+    // Set Defaults
+    const E3dDefaultAttributes aDefault;
+
+    SetDefaultAttributes(aDefault);
+}
+
+E3dCubeObj::E3dCubeObj(SdrModel& rSdrModel, E3dCubeObj const & rSource)
+:   E3dCompoundObject(rSdrModel, rSource)
+{
+    // Set Defaults
+    const E3dDefaultAttributes aDefault;
+
+    SetDefaultAttributes(aDefault);
+
+    aCubePos = rSource.aCubePos;
+    aCubeSize = rSource.aCubeSize;
+    bPosIsCenter = rSource.bPosIsCenter;
+}
+
+E3dCubeObj::~E3dCubeObj()
+{
+}
+
+void E3dCubeObj::SetDefaultAttributes(const E3dDefaultAttributes& rDefault)
+{
+    aCubePos = rDefault.GetDefaultCubePos();
+    aCubeSize = rDefault.GetDefaultCubeSize();
+    bPosIsCenter = rDefault.GetDefaultCubePosIsCenter();
+}
+
+SdrObjKind E3dCubeObj::GetObjIdentifier() const
+{
+    return SdrObjKind::E3D_Cube;
+}
+
+// Convert the object into a group object consisting of 6 polygons
+
+SdrObjectUniquePtr E3dCubeObj::DoConvertToPolyObj(bool /*bBezier*/, bool /*bAddText*/) const
+{
+    return nullptr;
+}
+
+E3dCubeObj* E3dCubeObj::CloneSdrObject(SdrModel& rTargetModel) const
+{
+    return new E3dCubeObj(rTargetModel, *this);
+}
+
+// Set local parameters with geometry re-creating
+
+void E3dCubeObj::SetCubePos(const basegfx::B3DPoint& rNew)
+{
+    if(aCubePos != rNew)
+    {
+        aCubePos = rNew;
+        ActionChanged();
+    }
+}
+
+void E3dCubeObj::SetCubeSize(const basegfx::B3DVector& rNew)
+{
+    if(aCubeSize != rNew)
+    {
+        aCubeSize = rNew;
+        ActionChanged();
+    }
+}
+
+void E3dCubeObj::SetPosIsCenter(bool bNew)
+{
+    if(bPosIsCenter != bNew)
+    {
+        bPosIsCenter = bNew;
+        ActionChanged();
+    }
+}
+
+// Get the name of the object (singular)
+
+OUString E3dCubeObj::TakeObjNameSingul() const
+{
+    OUString sName = SvxResId(STR_ObjNameSingulCube3d);
+
+    OUString aName(GetName());
+    if (!aName.isEmpty())
+    {
+        sName += " \'" + aName + "'";
+    }
+    return sName;
+}
+
+// Get the name of the object (plural)
+
+OUString E3dCubeObj::TakeObjNamePlural() const
+{
+    return SvxResId(STR_ObjNamePluralCube3d);
+}
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
-- 
cgit v1.2.3