#. extracted from chart2/inc
msgid ""
msgstr ""
"Project-Id-Version: PACKAGE VERSION\n"
"Report-Msgid-Bugs-To: https://bugs.libreoffice.org/enter_bug.cgi?product=LibreOffice&bug_status=UNCONFIRMED&component=UI\n"
"POT-Creation-Date: 2022-01-31 18:18+0100\n"
"PO-Revision-Date: 2021-09-08 09:16+0000\n"
"Last-Translator: Sangwoo Park <tvtvgogo@naver.com>\n"
"Language-Team: Korean <https://translations.documentfoundation.org/projects/libo_ui-master/chart2messages/ko/>\n"
"Language: ko\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=1; plural=0;\n"
"X-Accelerator-Marker: ~\n"
"X-Generator: LibreOffice\n"
"X-POOTLE-MTIME: 1559488541.000000\n"

#. NCRDD
#: chart2/inc/chart.hrc:18
msgctxt "tp_ChartType|liststore1"
msgid "Bar"
msgstr "막대"

#. YpLZF
#: chart2/inc/chart.hrc:19
msgctxt "tp_ChartType|liststore1"
msgid "Cylinder"
msgstr "원통형"

#. VLXhh
#: chart2/inc/chart.hrc:20
msgctxt "tp_ChartType|liststore1"
msgid "Cone"
msgstr "원추형"

#. xsWC2
#: chart2/inc/chart.hrc:21
msgctxt "tp_ChartType|liststore1"
msgid "Pyramid"
msgstr "피라미드"

#. wH3TZ
msgctxt "stock"
msgid "_Add"
msgstr "추가(_A)"

#. S9dsC
msgctxt "stock"
msgid "_Apply"
msgstr "적용(_A)"

#. TMo6G
msgctxt "stock"
msgid "_Cancel"
msgstr "취소(_C)"

#. MRCkv
msgctxt "stock"
msgid "_Close"
msgstr "닫기(_C)"

#. nvx5t
msgctxt "stock"
msgid "_Delete"
msgstr "지우기(_D)"

#. YspCj
msgctxt "stock"
msgid "_Edit"
msgstr "편집(_E)"

#. imQxr
msgctxt "stock"
msgid "_Help"
msgstr "도움말(_H)"

#. RbjyB
msgctxt "stock"
msgid "_New"
msgstr "새로 만들기(_N)"

#. dx2yy
msgctxt "stock"
msgid "_No"
msgstr "아니오(_N)"

#. M9DsL
msgctxt "stock"
msgid "_OK"
msgstr "확인(_O)"

#. VtJS9
msgctxt "stock"
msgid "_Remove"
msgstr "삭제(_R)"

#. C69Fy
msgctxt "stock"
msgid "_Reset"
msgstr ""

#. mgpxh
msgctxt "stock"
msgid "_Yes"
msgstr "예(_Y)"

#. v9sqX
#: chart2/inc/strings.hrc:24
msgctxt "STR_DLG_CHART_WIZARD"
msgid "Chart Wizard"
msgstr "차트 마법사"

#. HCEG9
#: chart2/inc/strings.hrc:25
msgctxt "STR_DLG_SMOOTH_LINE_PROPERTIES"
msgid "Smooth Lines"
msgstr "선을 유연하게 조정"

#. qxGHJ
#: chart2/inc/strings.hrc:26
msgctxt "STR_DLG_STEPPED_LINE_PROPERTIES"
msgid "Stepped Lines"
msgstr "계단식 선"

#. LcVWV
#: chart2/inc/strings.hrc:27
msgctxt "STR_DLG_REMOVE_DATA_TABLE"
msgid "This chart currently contains an internal data table. Do you want to proceed, deleting the internal data table, and set a new data range?"
msgstr "이 차트에는 내부 데이터 테이블이 포함되어 있습니다. 내부 데이터 테이블을 삭제하고, 새 데이터 범위를 설정하겠습니까?"

#. E2JCT
#: chart2/inc/strings.hrc:28
msgctxt "STR_PAGE_CHARTTYPE"
msgid "Chart Type"
msgstr "차트 유형"

#. GFDEv
#: chart2/inc/strings.hrc:29
msgctxt "STR_PAGE_DATA_RANGE"
msgid "Data Range"
msgstr "데이터 범위"

#. uxZuD
#: chart2/inc/strings.hrc:30
msgctxt "STR_PAGE_CHART_ELEMENTS"
msgid "Chart Elements"
msgstr "차트 요소"

#. sDxQz
#: chart2/inc/strings.hrc:31
msgctxt "STR_PAGE_LINE"
msgid "Line"
msgstr "선"

#. EoKxj
#: chart2/inc/strings.hrc:32
msgctxt "STR_PAGE_BORDER"
msgid "Borders"
msgstr "테두리"

#. 2suvG
#: chart2/inc/strings.hrc:33
msgctxt "STR_PAGE_AREA"
msgid "Area"
msgstr "영역"

#. 3sDYn
#: chart2/inc/strings.hrc:34
msgctxt "STR_PAGE_TRANSPARENCY"
msgid "Transparency"
msgstr "투명도"

#. tESet
#: chart2/inc/strings.hrc:35
msgctxt "STR_PAGE_FONT"
msgid "Font"
msgstr "글꼴"

#. ByYYG
#: chart2/inc/strings.hrc:36
msgctxt "STR_PAGE_FONT_EFFECTS"
msgid "Font Effects"
msgstr "글꼴 효과"

#. YydEQ
#: chart2/inc/strings.hrc:37
msgctxt "STR_PAGE_NUMBERS"
msgid "Numbers"
msgstr "숫자"

#. nTFNm
#: chart2/inc/strings.hrc:38
msgctxt "STR_PAGE_POSITION"
msgid "Position"
msgstr "위치"

#. iTeHp
#: chart2/inc/strings.hrc:39
msgctxt "STR_PAGE_LAYOUT"
msgid "Layout"
msgstr "레이아웃"

#. 4Gz8K
#: chart2/inc/strings.hrc:40
msgctxt "STR_PAGE_OPTIONS"
msgid "Options"
msgstr "옵션"

#. RCGEN
#: chart2/inc/strings.hrc:41
msgctxt "STR_PAGE_SCALE"
msgid "Scale"
msgstr "배율"

#. QR25P
#: chart2/inc/strings.hrc:42
msgctxt "STR_PAGE_POSITIONING"
msgid "Positioning"
msgstr "배치"

#. omcEo
#: chart2/inc/strings.hrc:43
msgctxt "STR_PAGE_TRENDLINE_TYPE"
msgid "Type"
msgstr "유형"

#. EvFoA
#: chart2/inc/strings.hrc:44
msgctxt "STR_PAGE_XERROR_BARS"
msgid "X Error Bars"
msgstr "X 오차 막대"

#. NKDFm
#: chart2/inc/strings.hrc:45
msgctxt "STR_PAGE_YERROR_BARS"
msgid "Y Error Bars"
msgstr "Y 오차 막대"

#. mjAwD
#: chart2/inc/strings.hrc:46
msgctxt "STR_PAGE_ALIGNMENT"
msgid "Alignment"
msgstr "맞춤"

#. hXbmP
#: chart2/inc/strings.hrc:47
msgctxt "STR_PAGE_PERSPECTIVE"
msgid "Perspective"
msgstr "원근감"

#. 7RHre
#: chart2/inc/strings.hrc:48
msgctxt "STR_PAGE_APPEARANCE"
msgid "Appearance"
msgstr "모양새"

#. mvWu8
#: chart2/inc/strings.hrc:49
msgctxt "STR_PAGE_ILLUMINATION"
msgid "Illumination"
msgstr "조명"

#. YBnCa
#: chart2/inc/strings.hrc:50
msgctxt "STR_PAGE_ASIAN"
msgid "Asian Typography"
msgstr "한글 입력 체계"

#. 6xo4a
#: chart2/inc/strings.hrc:51
msgctxt "STR_OBJECT_AVERAGE_LINE_WITH_PARAMETERS"
msgid "Mean value line with value %AVERAGE_VALUE and standard deviation %STD_DEVIATION"
msgstr "%AVERAGE_VALUE 값과 %STD_DEVIATION 표준 편차를 가진 평균값 선"

#. eP9wF
#: chart2/inc/strings.hrc:52
msgctxt "STR_OBJECT_AXIS"
msgid "Axis"
msgstr "축"

#. jNgVd
#: chart2/inc/strings.hrc:53
msgctxt "STR_OBJECT_AXIS_X"
msgid "X Axis"
msgstr "X 축"

#. cA4xe
#: chart2/inc/strings.hrc:54
msgctxt "STR_OBJECT_AXIS_Y"
msgid "Y Axis"
msgstr "Y 축"

#. ZXErW
#: chart2/inc/strings.hrc:55
msgctxt "STR_OBJECT_AXIS_Z"
msgid "Z Axis"
msgstr "Z 축"

#. qkJUd
#: chart2/inc/strings.hrc:56
msgctxt "STR_OBJECT_SECONDARY_X_AXIS"
msgid "Secondary X Axis"
msgstr "2차 X 축"

#. YHCbM
#: chart2/inc/strings.hrc:57
msgctxt "STR_OBJECT_SECONDARY_Y_AXIS"
msgid "Secondary Y Axis"
msgstr "2차 Y 축"

#. natrx
#: chart2/inc/strings.hrc:58
msgctxt "STR_OBJECT_AXES"
msgid "Axes"
msgstr "축"

#. FE87Y
#: chart2/inc/strings.hrc:59
msgctxt "STR_OBJECT_GRIDS"
msgid "Grids"
msgstr "눈금선"

#. zyanU
#: chart2/inc/strings.hrc:60
msgctxt "STR_OBJECT_GRID"
msgid "Grid"
msgstr "눈금선"

#. pEwe5
#: chart2/inc/strings.hrc:61
msgctxt "STR_OBJECT_GRID_MAJOR_X"
msgid "X Axis Major Grid"
msgstr "X 축 주 눈금선"

#. ETsPn
#: chart2/inc/strings.hrc:62
msgctxt "STR_OBJECT_GRID_MAJOR_Y"
msgid "Y Axis Major Grid"
msgstr "Y 축 주 눈금선"

#. SonFW
#: chart2/inc/strings.hrc:63
msgctxt "STR_OBJECT_GRID_MAJOR_Z"
msgid "Z Axis Major Grid"
msgstr "Z 축 주 눈금선"

#. sBgvb
#: chart2/inc/strings.hrc:64
msgctxt "STR_OBJECT_GRID_MINOR_X"
msgid "X Axis Minor Grid"
msgstr "X 축 보조 눈금선"

#. 3YcEK
#: chart2/inc/strings.hrc:65
msgctxt "STR_OBJECT_GRID_MINOR_Y"
msgid "Y Axis Minor Grid"
msgstr "Y 축 보조 눈금선"

#. hkZQA
#: chart2/inc/strings.hrc:66
msgctxt "STR_OBJECT_GRID_MINOR_Z"
msgid "Z Axis Minor Grid"
msgstr "Z 축 보조 눈금선"

#. HRr84
#: chart2/inc/strings.hrc:67
msgctxt "STR_OBJECT_LEGEND"
msgid "Legend"
msgstr "범례"

#. BKrVD
#: chart2/inc/strings.hrc:68
msgctxt "STR_OBJECT_TITLE"
msgid "Title"
msgstr "직위"

#. daY6i
#: chart2/inc/strings.hrc:69
msgctxt "STR_OBJECT_TITLES"
msgid "Titles"
msgstr "제목"

#. HPrwf
#: chart2/inc/strings.hrc:70
msgctxt "STR_OBJECT_TITLE_MAIN"
msgid "Main Title"
msgstr "주 제목"

#. 3HPz3
#: chart2/inc/strings.hrc:71
msgctxt "STR_OBJECT_TITLE_SUB"
msgid "Subtitle"
msgstr "부제"

#. eZE2v
#: chart2/inc/strings.hrc:72
msgctxt "STR_OBJECT_TITLE_X_AXIS"
msgid "X Axis Title"
msgstr "X 축 제목"

#. uqBii
#: chart2/inc/strings.hrc:73
msgctxt "STR_OBJECT_TITLE_Y_AXIS"
msgid "Y Axis Title"
msgstr "Y 축 제목"

#. 37EU5
#: chart2/inc/strings.hrc:74
msgctxt "STR_OBJECT_TITLE_Z_AXIS"
msgid "Z Axis Title"
msgstr "Z 축 제목"

#. QmoDH
#: chart2/inc/strings.hrc:75
msgctxt "STR_OBJECT_TITLE_SECONDARY_X_AXIS"
msgid "Secondary X Axis Title"
msgstr "2차 X 축 제목"

#. F7NWG
#: chart2/inc/strings.hrc:76
msgctxt "STR_OBJECT_TITLE_SECONDARY_Y_AXIS"
msgid "Secondary Y Axis Title"
msgstr "2차 Y 축 제목"

#. AtLNM
#: chart2/inc/strings.hrc:77
msgctxt "STR_OBJECT_LABEL"
msgid "Label"
msgstr "레이블"

#. ag7pg
#: chart2/inc/strings.hrc:78
msgctxt "STR_OBJECT_DATALABELS"
msgid "Data Labels"
msgstr "데이터 레이블"

#. ts3Cj
#: chart2/inc/strings.hrc:79
msgctxt "STR_OBJECT_DATAPOINT"
msgid "Data Point"
msgstr "데이터 요소"

#. EnsUx
#: chart2/inc/strings.hrc:80
msgctxt "STR_OBJECT_DATAPOINTS"
msgid "Data Points"
msgstr "데이터 요소"

#. CqWnU
#: chart2/inc/strings.hrc:81
msgctxt "STR_OBJECT_LEGEND_SYMBOL"
msgid "Legend Key"
msgstr "범례 키"

#. jNwC8
#: chart2/inc/strings.hrc:82
msgctxt "STR_OBJECT_DATASERIES"
msgid "Data Series"
msgstr "데이터 계열"

#. Zf7DA
#: chart2/inc/strings.hrc:83
msgctxt "STR_OBJECT_DATASERIES_PLURAL"
msgid "Data Series"
msgstr "데이터 계열"

#. 3G9WG
#: chart2/inc/strings.hrc:84
msgctxt "STR_OBJECT_CURVE"
msgid "Trend Line"
msgstr "추세선"

#. 8miGx
#: chart2/inc/strings.hrc:85
msgctxt "STR_OBJECT_CURVES"
msgid "Trend Lines"
msgstr "추세선"

#. ESVL6
#: chart2/inc/strings.hrc:86
msgctxt "STR_OBJECT_CURVE_WITH_PARAMETERS"
msgid "Trend line %FORMULA with accuracy R² = %RSQUARED"
msgstr "정확도가 R² = %RSQUARED 인 추세선 %FORMULA"

#. DrVz3
#: chart2/inc/strings.hrc:87
msgctxt "STR_OBJECT_MOVING_AVERAGE_WITH_PARAMETERS"
msgid "Moving average trend line with period = %PERIOD"
msgstr "기간을 포함한 이동 평균 추세선 = %PERIOD"

#. mcMQC
#: chart2/inc/strings.hrc:88
msgctxt "STR_OBJECT_AVERAGE_LINE"
msgid "Mean Value Line"
msgstr "평균값 선"

#. RLMNC
#: chart2/inc/strings.hrc:89
msgctxt "STR_OBJECT_CURVE_EQUATION"
msgid "Equation"
msgstr "방정식"

#. apx4j
#: chart2/inc/strings.hrc:90
msgctxt "STR_OBJECT_ERROR_BARS_X"
msgid "X Error Bars"
msgstr "X 오차 막대"

#. BUEbq
#: chart2/inc/strings.hrc:91
msgctxt "STR_OBJECT_ERROR_BARS_Y"
msgid "Y Error Bars"
msgstr "Y 오차 막대"

#. tQCpv
#: chart2/inc/strings.hrc:92
msgctxt "STR_OBJECT_ERROR_BARS_Z"
msgid "Z Error Bars"
msgstr "Z 오차 막대"

#. bz4Dw
#: chart2/inc/strings.hrc:93
msgctxt "STR_OBJECT_STOCK_LOSS"
msgid "Stock Loss"
msgstr "주가 감소"

#. AFE2t
#: chart2/inc/strings.hrc:94
msgctxt "STR_OBJECT_STOCK_GAIN"
msgid "Stock Gain"
msgstr "주가 증가"

#. Y5Qif
#: chart2/inc/strings.hrc:95
msgctxt "STR_OBJECT_PAGE"
msgid "Chart Area"
msgstr "차트 영역"

#. J9m2k
#: chart2/inc/strings.hrc:96
msgctxt "STR_OBJECT_DIAGRAM"
msgid "Chart"
msgstr "차트"

#. oRCev
#: chart2/inc/strings.hrc:97
msgctxt "STR_OBJECT_DIAGRAM_WALL"
msgid "Chart Wall"
msgstr "차트 배경"

#. meV4E
#: chart2/inc/strings.hrc:98
msgctxt "STR_OBJECT_DIAGRAM_FLOOR"
msgid "Chart Floor"
msgstr "차트 밑면"

#. AHV4D
#: chart2/inc/strings.hrc:99
msgctxt "STR_OBJECT_SHAPE"
msgid "Drawing Object"
msgstr "그리기 개체"

#. dNCXG
#: chart2/inc/strings.hrc:100
msgctxt "STR_TIP_DATASERIES"
msgid "Data Series '%SERIESNAME'"
msgstr "데이터 계열 '%SERIESNAME'"

#. LDsiQ
#: chart2/inc/strings.hrc:101
msgctxt "STR_TIP_DATAPOINT_INDEX"
msgid "Data Point %POINTNUMBER"
msgstr "데이터 요소 %POINTNUMBER"

#. 6C6HT
#: chart2/inc/strings.hrc:102
msgctxt "STR_TIP_DATAPOINT_VALUES"
msgid "Values: %POINTVALUES"
msgstr "값: %POINTVALUES"

#. rCVeF
#: chart2/inc/strings.hrc:103
msgctxt "STR_TIP_DATAPOINT"
msgid "Data Point %POINTNUMBER, data series %SERIESNUMBER, values: %POINTVALUES"
msgstr "데이터 요소 %POINTNUMBER, 데이터 계열 %SERIESNUMBER, 값: %POINTVALUES"

#. eKDAq
#: chart2/inc/strings.hrc:104
msgctxt "STR_STATUS_DATAPOINT_MARKED"
msgid "Data point %POINTNUMBER in data series %SERIESNUMBER selected, values: %POINTVALUES"
msgstr "선택한 데이터 계열 %SERIESNUMBER의 데이터 요소 %POINTNUMBER, 값: %POINTVALUES"

#. iKkhv
#: chart2/inc/strings.hrc:105
msgctxt "STR_STATUS_OBJECT_MARKED"
msgid "%OBJECTNAME selected"
msgstr "%OBJECTNAME 선택됨"

#. vyJED
#: chart2/inc/strings.hrc:106
msgctxt "STR_STATUS_PIE_SEGMENT_EXPLODED"
msgid "Pie exploded by %PERCENTVALUE percent"
msgstr "%PERCENTVALUE 퍼센트로 쪼개진 원형"

#. FbGFr
#: chart2/inc/strings.hrc:107
msgctxt "STR_OBJECT_FOR_SERIES"
msgid "%OBJECTNAME for Data Series '%SERIESNAME'"
msgstr "데이터 계열 '%SERIESNAME'을(를) 위한 %OBJECTNAME"

#. VVB54
#: chart2/inc/strings.hrc:108
msgctxt "STR_OBJECT_FOR_ALL_SERIES"
msgid "%OBJECTNAME for all Data Series"
msgstr "모든 데이터를 위한 %OBJECTNAME"

#. Ahjrv
#: chart2/inc/strings.hrc:109
msgctxt "STR_ACTION_EDIT_CHARTTYPE"
msgid "Edit chart type"
msgstr "차트 유형 편집"

#. zSLvA
#: chart2/inc/strings.hrc:110
msgctxt "STR_ACTION_EDIT_DATA_RANGES"
msgid "Edit data ranges"
msgstr "데이터 범위 편집"

#. RmtWN
#: chart2/inc/strings.hrc:111
msgctxt "STR_ACTION_EDIT_3D_VIEW"
msgid "Edit 3D view"
msgstr "3D 보기 편집"

#. REBbR
#: chart2/inc/strings.hrc:112
msgctxt "STR_ACTION_EDIT_CHART_DATA"
msgid "Edit chart data"
msgstr "차트 데이터 편집"

#. Y7hDD
#: chart2/inc/strings.hrc:113
msgctxt "STR_ACTION_TOGGLE_LEGEND"
msgid "Legend on/off"
msgstr "범례 적용/적용 안함"

#. fnfBr
#: chart2/inc/strings.hrc:114
msgctxt "STR_ACTION_TOGGLE_GRID_HORZ"
msgid "Horizontal grid major/major&minor/off"
msgstr "수평 격자 주/주&보조/적용안함"

#. jZDDr
#: chart2/inc/strings.hrc:115
msgctxt "STR_ACTION_TOGGLE_GRID_VERTICAL"
msgid "Vertical grid major/major&minor/off"
msgstr "수평 격자 주/주&보조/적용안함"

#. bZzzZ
#: chart2/inc/strings.hrc:116
msgctxt "STR_ACTION_SCALE_TEXT"
msgid "Scale Text"
msgstr "텍스트 배율"

#. wJ7wY
#: chart2/inc/strings.hrc:117
msgctxt "STR_ACTION_REARRANGE_CHART"
msgid "Automatic Layout"
msgstr "자동 레이아웃"

#. j4xMg
#: chart2/inc/strings.hrc:118
msgctxt "STR_ACTION_NOTPOSSIBLE"
msgid "This function cannot be completed with the selected objects."
msgstr "이 기능은 선택한 개체와 함께 실행할 수 없습니다."

#. GaEzn
#: chart2/inc/strings.hrc:119
msgctxt "STR_ACTION_EDIT_TEXT"
msgid "Edit text"
msgstr "텍스트 편집"

#. EVDVA
#: chart2/inc/strings.hrc:120
msgctxt "STR_COLUMN_LABEL"
msgid "Column %COLUMNNUMBER"
msgstr "%COLUMNNUMBER 열"

#. dmCD9
#: chart2/inc/strings.hrc:121
msgctxt "STR_ROW_LABEL"
msgid "Row %ROWNUMBER"
msgstr "%ROWNUMBER 행"

#. fVS6E
#: chart2/inc/strings.hrc:122
msgctxt "STR_DATA_ROLE_LABEL"
msgid "Name"
msgstr "이름"

#. ozAB8
#: chart2/inc/strings.hrc:123
msgctxt "STR_DATA_ROLE_X"
msgid "X-Values"
msgstr "X-값"

#. FgGiW
#: chart2/inc/strings.hrc:124
msgctxt "STR_DATA_ROLE_Y"
msgid "Y-Values"
msgstr "Y-값"

#. vzYAg
#: chart2/inc/strings.hrc:125
msgctxt "STR_DATA_ROLE_SIZE"
msgid "Bubble Sizes"
msgstr "거품 크기"

#. pMGL4
#: chart2/inc/strings.hrc:126
msgctxt "STR_DATA_ROLE_X_ERROR"
msgid "X-Error-Bars"
msgstr "X-오차-막대"

#. c9oCh
#: chart2/inc/strings.hrc:127
msgctxt "STR_DATA_ROLE_X_ERROR_POSITIVE"
msgid "Positive X-Error-Bars"
msgstr "양수 X-오차-막대"

#. uTsVM
#: chart2/inc/strings.hrc:128
msgctxt "STR_DATA_ROLE_X_ERROR_NEGATIVE"
msgid "Negative X-Error-Bars"
msgstr "음수 X-오차-막대"

#. RZaBP
#: chart2/inc/strings.hrc:129
msgctxt "STR_DATA_ROLE_Y_ERROR"
msgid "Y-Error-Bars"
msgstr "Y-오차-막대"

#. ZFFKK
#: chart2/inc/strings.hrc:130
msgctxt "STR_DATA_ROLE_Y_ERROR_POSITIVE"
msgid "Positive Y-Error-Bars"
msgstr "양수 Y-오차-막대"

#. pZ3af
#: chart2/inc/strings.hrc:131
msgctxt "STR_DATA_ROLE_Y_ERROR_NEGATIVE"
msgid "Negative Y-Error-Bars"
msgstr "음수 Y-오차-막대"

#. SD2nd
#: chart2/inc/strings.hrc:132
msgctxt "STR_DATA_ROLE_FIRST"
msgid "Open Values"
msgstr "값 열기"

#. fySNC
#: chart2/inc/strings.hrc:133
msgctxt "STR_DATA_ROLE_LAST"
msgid "Close Values"
msgstr "값 닫기"

#. j5tve
#: chart2/inc/strings.hrc:134
msgctxt "STR_DATA_ROLE_MIN"
msgid "Low Values"
msgstr "낮은 값"

#. kr9Ta
#: chart2/inc/strings.hrc:135
msgctxt "STR_DATA_ROLE_MAX"
msgid "High Values"
msgstr "높은 값"

#. bK6ee
#: chart2/inc/strings.hrc:136
msgctxt "STR_DATA_ROLE_CATEGORIES"
msgid "Categories"
msgstr "범주"

#. yL7QE
#: chart2/inc/strings.hrc:137
msgctxt "STR_DATA_UNNAMED_SERIES"
msgid "Series"
msgstr "순서"

#. EgbkL
#: chart2/inc/strings.hrc:138
msgctxt "STR_DATA_UNNAMED_SERIES_WITH_INDEX"
msgid "Series%NUMBER"
msgstr "순서%NUMBER"

#. E2YZH
#: chart2/inc/strings.hrc:139
msgctxt "STR_DATA_SELECT_RANGE_FOR_SERIES"
msgid "Select Range for %VALUETYPE of %SERIESNAME"
msgstr "%SERIESNAME의 %VALUETYPE에 대한 범위를 선택하세요"

#. pBSSc
#: chart2/inc/strings.hrc:140
msgctxt "STR_DATA_SELECT_RANGE_FOR_CATEGORIES"
msgid "Select Range for Categories"
msgstr "범주에 대한 범위 선택"

#. brKa4
#: chart2/inc/strings.hrc:141
msgctxt "STR_DATA_SELECT_RANGE_FOR_DATALABELS"
msgid "Select Range for data labels"
msgstr "데이터 레이블에 대한 범위 선택"

#. EDFdH
#: chart2/inc/strings.hrc:142
msgctxt "STR_DATA_EDITOR_INCORRECT_INPUT"
msgid ""
"Your last input is incorrect.\n"
"Ignore this change and close the dialog?"
msgstr ""
"마지막에 입력한 값이 잘못되었습니다.\n"
"이 변경 사항을 무시하고 대화 상자를 닫으시겠습니까?"

#. Vx6bG
#: chart2/inc/strings.hrc:143
msgctxt "STR_TEXT_DIRECTION_LTR"
msgid "Left-to-right"
msgstr "왼쪽에서 오른쪽으로"

#. WoDyW
#: chart2/inc/strings.hrc:144
msgctxt "STR_TEXT_DIRECTION_RTL"
msgid "Right-to-left"
msgstr "오른쪽에서 왼쪽으로"

#. dtE2L
#: chart2/inc/strings.hrc:145
msgctxt "STR_TEXT_DIRECTION_SUPER"
msgid "Use superordinate object settings"
msgstr "상위 개체 설정 사용"

#. GtGu4
#: chart2/inc/strings.hrc:146
msgctxt "STR_PROPERTY_ROLE_FILLCOLOR"
msgid "Fill Color"
msgstr "색상 채우기"

#. bzDDY
#: chart2/inc/strings.hrc:147
msgctxt "STR_PROPERTY_ROLE_BORDERCOLOR"
msgid "Border Color"
msgstr "테두리 색"

#. TuRxr
#: chart2/inc/strings.hrc:149
msgctxt "STR_CONTROLTEXT_ERROR_BARS_FROM_DATA"
msgid "From Data Table"
msgstr "데이터 표에서"

#. aPEDY
#: chart2/inc/strings.hrc:150
msgctxt "STR_REGRESSION_LINEAR"
msgid "Linear"
msgstr "선형"

#. nD8ay
#: chart2/inc/strings.hrc:151
msgctxt "STR_REGRESSION_LOG"
msgid "Logarithmic"
msgstr "대수"

#. CotSJ
#: chart2/inc/strings.hrc:152
msgctxt "STR_REGRESSION_EXP"
msgid "Exponential"
msgstr "지수"

#. HqBJV
#: chart2/inc/strings.hrc:153
msgctxt "STR_REGRESSION_POWER"
msgid "Power"
msgstr "제곱"

#. dBiUj
#: chart2/inc/strings.hrc:154
msgctxt "STR_REGRESSION_POLYNOMIAL"
msgid "Polynomial"
msgstr "다항"

#. FWi4g
#: chart2/inc/strings.hrc:155
msgctxt "STR_REGRESSION_MOVING_AVERAGE"
msgid "Moving average"
msgstr "이동 평균"

#. psj3B
#: chart2/inc/strings.hrc:156
msgctxt "STR_REGRESSION_MEAN"
msgid "Mean"
msgstr "평균"

#. C8FVd
#: chart2/inc/strings.hrc:158
msgctxt "STR_TYPE_COLUMN"
msgid "Column"
msgstr "열"

#. SWPnA
#: chart2/inc/strings.hrc:159
msgctxt "STR_TYPE_BAR"
msgid "Bar"
msgstr "막대"

#. xUnpz
#: chart2/inc/strings.hrc:160
msgctxt "STR_TYPE_AREA"
msgid "Area"
msgstr "영역"

#. bqxBm
#: chart2/inc/strings.hrc:161
msgctxt "STR_TYPE_PIE"
msgid "Pie"
msgstr "원형"

#. GGwEH
#: chart2/inc/strings.hrc:162
msgctxt "STR_PIE_EXPLODED"
msgid "Exploded Pie Chart"
msgstr "쪼개진 원형 차트"

#. gxFtf
#: chart2/inc/strings.hrc:163
msgctxt "STR_DONUT_EXPLODED"
msgid "Exploded Donut Chart"
msgstr "쪼개진 도넛형 차트"

#. nsoQ2
#: chart2/inc/strings.hrc:164
msgctxt "STR_DONUT"
msgid "Donut"
msgstr "도넛형"

#. 7HjEG
#: chart2/inc/strings.hrc:165
msgctxt "STR_TYPE_LINE"
msgid "Line"
msgstr "선"

#. Miu8E
#: chart2/inc/strings.hrc:166
msgctxt "STR_TYPE_XY"
msgid "XY (Scatter)"
msgstr "XY(분산형)"

#. LBFRX
#: chart2/inc/strings.hrc:167
msgctxt "STR_POINTS_AND_LINES"
msgid "Points and Lines"
msgstr "점과 선"

#. fjka7
#: chart2/inc/strings.hrc:168
msgctxt "STR_POINTS_ONLY"
msgid "Points Only"
msgstr "점만"

#. Sz53v
#: chart2/inc/strings.hrc:169
msgctxt "STR_LINES_ONLY"
msgid "Lines Only"
msgstr "선만"

#. AAEA2
#: chart2/inc/strings.hrc:170
msgctxt "STR_LINES_3D"
msgid "3D Lines"
msgstr "3D 선"

#. ABjEg
#: chart2/inc/strings.hrc:171
msgctxt "STR_TYPE_COMBI_COLUMN_LINE"
msgid "Column and Line"
msgstr "열과 선"

#. nVKfC
#: chart2/inc/strings.hrc:172
msgctxt "STR_LINE_COLUMN"
msgid "Columns and Lines"
msgstr "열과 선"

#. QkQSa
#: chart2/inc/strings.hrc:173
msgctxt "STR_LINE_STACKEDCOLUMN"
msgid "Stacked Columns and Lines"
msgstr "누적된 열과 선"

#. HGKEx
#: chart2/inc/strings.hrc:174
msgctxt "STR_TYPE_NET"
msgid "Net"
msgstr "네트워크"

#. BKUc4
#: chart2/inc/strings.hrc:175
msgctxt "STR_TYPE_STOCK"
msgid "Stock"
msgstr "주가"

#. oG4gw
#: chart2/inc/strings.hrc:176
msgctxt "STR_STOCK_1"
msgid "Stock Chart 1"
msgstr "주가 차트 1"

#. pSzDo
#: chart2/inc/strings.hrc:177
msgctxt "STR_STOCK_2"
msgid "Stock Chart 2"
msgstr "주가 차트 2"

#. aEFDu
#: chart2/inc/strings.hrc:178
msgctxt "STR_STOCK_3"
msgid "Stock Chart 3"
msgstr "주가 차트 3"

#. jZqox
#: chart2/inc/strings.hrc:179
msgctxt "STR_STOCK_4"
msgid "Stock Chart 4"
msgstr "주가 차트 4"

#. DNBgg
#: chart2/inc/strings.hrc:180
msgctxt "STR_NORMAL"
msgid "Normal"
msgstr "보통"

#. EfGVL
#: chart2/inc/strings.hrc:181
msgctxt "STR_STACKED"
msgid "Stacked"
msgstr "누적"

#. wqtzw
#: chart2/inc/strings.hrc:182
msgctxt "STR_PERCENT"
msgid "Percent Stacked"
msgstr "백분율 누적"

#. 52UGB
#: chart2/inc/strings.hrc:183
msgctxt "STR_DEEP"
msgid "Deep"
msgstr "깊이"

#. dxfuQ
#: chart2/inc/strings.hrc:184
msgctxt "STR_FILLED"
msgid "Filled"
msgstr "채움"

#. rC5nu
#: chart2/inc/strings.hrc:185
msgctxt "STR_TYPE_BUBBLE"
msgid "Bubble"
msgstr "거품"

#. N9tXx
#: chart2/inc/strings.hrc:186
msgctxt "STR_BUBBLE_1"
msgid "Bubble Chart"
msgstr "거품형 차트"

#. AjPsf
#: chart2/inc/strings.hrc:188
msgctxt "STR_INVALID_NUMBER"
msgid "Numbers are required. Check your input."
msgstr "숫자를 입력해야 합니다. 입력 내용을 확인하십시오."

#. ofh4V
#: chart2/inc/strings.hrc:189
msgctxt "STR_STEP_GT_ZERO"
msgid "The major interval requires a positive number. Check your input."
msgstr "주 간격에는 양수를 입력해야 합니다. 입력 내용을 확인하십시오."

#. EBJjR
#: chart2/inc/strings.hrc:190
msgctxt "STR_BAD_LOGARITHM"
msgid "The logarithmic scale requires positive numbers. Check your input."
msgstr "대수적 확대에는 양수를 입력해야 합니다. 입력 내용을 확인하십시오."

#. K8BCB
#: chart2/inc/strings.hrc:191
msgctxt "STR_MIN_GREATER_MAX"
msgid "The minimum must be lower than the maximum. Check your input."
msgstr "최소값은 반드시 최대값보다 작아야 합니다. 입력 내용을 확인하십시오."

#. oBR4x
#: chart2/inc/strings.hrc:192
msgctxt "STR_INVALID_INTERVALS"
msgid "The major interval needs to be greater than the minor interval. Check your input."
msgstr "주 간격은 보조 간격보다 커야 합니다. 입력 내용을 확인하십시오."

#. ZvDEh
#: chart2/inc/strings.hrc:193
msgctxt "STR_INVALID_TIME_UNIT"
msgid "The major and minor interval need to be greater or equal to the resolution. Check your input."
msgstr "주 간격과 보조 간격에는 해상도와 같거나 큰 값을 입력해야 합니다. 입력 내용을 확인하십시오."

#. VVVyQ
#: chart2/uiconfig/ui/3dviewdialog.ui:8
msgctxt "3dviewdialog|3DViewDialog"
msgid "3D View"
msgstr "3Ｄ 보기"

#. 3aACC
#: chart2/uiconfig/ui/chardialog.ui:8
msgctxt "chardialog|CharDialog"
msgid "Character"
msgstr "문자"

#. v55EG
#: chart2/uiconfig/ui/chardialog.ui:135
msgctxt "chardialog|font"
msgid "Font"
msgstr "글꼴"

#. TnnrC
#: chart2/uiconfig/ui/chardialog.ui:182
msgctxt "chardialog|fonteffects"
msgid "Font Effects"
msgstr "글꼴 효과"

#. nvprJ
#: chart2/uiconfig/ui/chardialog.ui:230
msgctxt "chardialog|position"
msgid "Position"
msgstr "위치"

#. vuzAY
#: chart2/uiconfig/ui/chartdatadialog.ui:8
msgctxt "chartdatadialog|ChartDataDialog"
msgid "Data Table"
msgstr "데이터 테이블"

#. ywdAz
#: chart2/uiconfig/ui/chartdatadialog.ui:72
msgctxt "chartdatadialog|InsertRow"
msgid "Insert Row"
msgstr "행 삽입"

#. 8ijLs
#: chart2/uiconfig/ui/chartdatadialog.ui:77
msgctxt "chartdatadialog|extended_tip|InsertRow"
msgid "Inserts a new row below the current row."
msgstr "현재 행 아래에 새로운 행을 삽입합니다."

#. DDsFz
#: chart2/uiconfig/ui/chartdatadialog.ui:89
msgctxt "chartdatadialog|InsertColumn"
msgid "Insert Series"
msgstr "연속으로 채우기"

#. EjHBF
#: chart2/uiconfig/ui/chartdatadialog.ui:94
msgctxt "chartdatadialog|extended_tip|InsertColumn"
msgid "Inserts a new data series after the current column."
msgstr "현재 열 뒤에 새로운 데이터 계열을 삽입합니다."

#. KuFy7
#: chart2/uiconfig/ui/chartdatadialog.ui:106
msgctxt "chartdatadialog|InsertTextColumn"
msgid "Insert Text Column"
msgstr "텍스트열 삽입"

#. tVACy
#: chart2/uiconfig/ui/chartdatadialog.ui:111
msgctxt "chartdatadialog|extended_tip|InsertTextColumn"
msgid "Inserts a new text column after the current column for hierarchical axes descriptions."
msgstr "계층적 축 설명을 위해 현재 열 뒤에 새 텍스트 열을 삽입합니다."

#. 4JgTE
#: chart2/uiconfig/ui/chartdatadialog.ui:123
msgctxt "chartdatadialog|RemoveRow"
msgid "Delete Row"
msgstr "행 삭제"

#. DVMcX
#: chart2/uiconfig/ui/chartdatadialog.ui:128
msgctxt "chartdatadialog|extended_tip|RemoveRow"
msgid "Deletes the current row. It is not possible to delete the label row."
msgstr "현재 행을 삭제합니다. 레이블 행은 삭제할 수 없습니다."

#. JCBmW
#: chart2/uiconfig/ui/chartdatadialog.ui:140
msgctxt "chartdatadialog|RemoveColumn"
msgid "Delete Series"
msgstr "데이터 계열 삭제"

#. mSCiJ
#: chart2/uiconfig/ui/chartdatadialog.ui:145
msgctxt "chartdatadialog|extended_tip|RemoveColumn"
msgid "Deletes the current series or text column. It is not possible to delete the first text column."
msgstr "현재의 계열이나 텍스트 열을 삭제합니다. 첫 번째 텍스트 열은 삭제할 수 없습니다."

#. MUkk3
#: chart2/uiconfig/ui/chartdatadialog.ui:167
msgctxt "chartdatadialog|MoveLeftColumn"
msgid "Move Series Left"
msgstr "데이터 왼쪽으로 이동"

#. V7UUB
#: chart2/uiconfig/ui/chartdatadialog.ui:172
msgctxt "chartdatadialog|extended_tip|MoveLeftColumn"
msgid "Switches the current column with its neighbor at the left."
msgstr ""

#. DfxQy
#: chart2/uiconfig/ui/chartdatadialog.ui:184
msgctxt "chartdatadialog|MoveRightColumn"
msgid "Move Series Right"
msgstr "데이터 오른쪽으로 이동"

#. JxZC8
#: chart2/uiconfig/ui/chartdatadialog.ui:189
msgctxt "chartdatadialog|extended_tip|MoveRightColumn"
msgid "Switches the current column with its neighbor at the right."
msgstr "현재 열을 오른쪽의 인접된 열로 전환합니다."

#. EkxKw
#: chart2/uiconfig/ui/chartdatadialog.ui:201
msgctxt "chartdatadialog|MoveUpRow"
msgid "Move Row Up"
msgstr "행 위로 이동"

#. DnZTt
#: chart2/uiconfig/ui/chartdatadialog.ui:206
msgctxt "chartdatadialog|extended_tip|MoveUpRow"
msgid "Switches the current row with its neighbor above."
msgstr ""

#. TvbuK
#: chart2/uiconfig/ui/chartdatadialog.ui:218
msgctxt "chartdatadialog|MoveDownRow"
msgid "Move Row Down"
msgstr "행 아래로 이동"

#. u8jmj
#: chart2/uiconfig/ui/chartdatadialog.ui:223
msgctxt "chartdatadialog|extended_tip|MoveDownRow"
msgid "Switches the current row with its neighbor below."
msgstr "현재 행을 아래의 행으로 전환합니다."

#. rRJDK
#: chart2/uiconfig/ui/chartdatadialog.ui:357
msgctxt "chartdatadialog|extended_tip|ChartDataDialog"
msgid "Opens the Data Table dialog where you can edit the chart data."
msgstr ""

#. KbkRw
#: chart2/uiconfig/ui/charttypedialog.ui:8
msgctxt "charttypedialog|ChartTypeDialog"
msgid "Chart Type"
msgstr "차트 유형"

#. 9AVY7
#: chart2/uiconfig/ui/datarangedialog.ui:8
msgctxt "datarangedialog|DataRangeDialog"
msgid "Data Ranges"
msgstr "데이터 범위"

#. PqEvS
#: chart2/uiconfig/ui/datarangedialog.ui:125
msgctxt "datarangedialog|range"
msgid "Data Range"
msgstr "데이터 범위"

#. YmqFB
#: chart2/uiconfig/ui/datarangedialog.ui:172
msgctxt "datarangedialog|series"
msgid "Data Series"
msgstr "데이터 계열"

#. H6ezZ
#: chart2/uiconfig/ui/dlg_DataLabel.ui:13
msgctxt "dlg_DataLabel|dlg_DataLabels"
msgid "Data Labels for all Data Series"
msgstr "모든 데이터 계열에 대한 데이터 레이블"

#. EEEgE
#: chart2/uiconfig/ui/dlg_DataLabel.ui:107
msgctxt "dlg_DataLabel|CB_VALUE_AS_NUMBER"
msgid "Value as _number"
msgstr ""

#. sDLeD
#: chart2/uiconfig/ui/dlg_DataLabel.ui:115
msgctxt "dlg_DataLabel|extended_tip|CB_VALUE_AS_NUMBER"
msgid "Displays the absolute values of the data points."
msgstr "데이터 요소의 절대값을 표시합니다."

#. 7zFS6
#: chart2/uiconfig/ui/dlg_DataLabel.ui:126
msgctxt "dlg_DataLabel|CB_VALUE_AS_PERCENTAGE"
msgid "Value as _percentage"
msgstr ""

#. 5Hp8E
#: chart2/uiconfig/ui/dlg_DataLabel.ui:134
msgctxt "dlg_DataLabel|extended_tip|CB_VALUE_AS_PERCENTAGE"
msgid "Displays the percentage of the data points in each column."
msgstr "데이터 요소의 백분율을 각 열에 표시합니다."

#. h3skj
#: chart2/uiconfig/ui/dlg_DataLabel.ui:145
msgctxt "dlg_DataLabel|CB_CATEGORY"
msgid "_Category"
msgstr ""

#. oJGQF
#: chart2/uiconfig/ui/dlg_DataLabel.ui:153
msgctxt "dlg_DataLabel|extended_tip|CB_CATEGORY"
msgid "Shows the data point text labels."
msgstr "데이터 요소 텍스트 레이블을 표시합니다."

#. u5FBJ
#: chart2/uiconfig/ui/dlg_DataLabel.ui:164
msgctxt "dlg_DataLabel|CB_SYMBOL"
msgid "_Legend key"
msgstr ""

#. 7WADc
#: chart2/uiconfig/ui/dlg_DataLabel.ui:172
msgctxt "dlg_DataLabel|extended_tip|CB_SYMBOL"
msgid "Displays the legend icons next to each data point label."
msgstr "범례 아이콘을 각 데이터 요소 레이블 옆에 표시합니다."

#. BA3kD
#: chart2/uiconfig/ui/dlg_DataLabel.ui:183
msgctxt "dlg_DataLabel|CB_WRAP_TEXT"
msgid "Auto text _wrap"
msgstr "자동 줄 바꿈(_W)"

#. bFd8g
#: chart2/uiconfig/ui/dlg_DataLabel.ui:197
msgctxt "dlg_DataLabel|PB_NUMBERFORMAT"
msgid "Number _format..."
msgstr "숫자 형식(_F)..."

#. yHa5z
#: chart2/uiconfig/ui/dlg_DataLabel.ui:205
msgctxt "dlg_DataLabel|extended_tip|PB_NUMBERFORMAT"
msgid "Opens a dialog to select the number format."
msgstr "숫자 서식을 선택하기 위한 대화상자를 표시합니다."

#. cFD6D
#: chart2/uiconfig/ui/dlg_DataLabel.ui:216
msgctxt "dlg_DataLabel|PB_PERCENT_NUMBERFORMAT"
msgid "Percentage f_ormat..."
msgstr "백분율 형식(_O)..."

#. Wj42y
#: chart2/uiconfig/ui/dlg_DataLabel.ui:224
msgctxt "dlg_DataLabel|extended_tip|PB_PERCENT_NUMBERFORMAT"
msgid "Opens a dialog to select the percentage format."
msgstr "퍼센트 서식을 선택하기 위한 대화상자를 엽니다."

#. ETbFx
#: chart2/uiconfig/ui/dlg_DataLabel.ui:237
msgctxt "dlg_DataLabel|CT_LABEL_DIAL"
msgid "ABCD"
msgstr "ABCD"

#. 69qZL
#: chart2/uiconfig/ui/dlg_DataLabel.ui:250
msgctxt "dlg_DataLabel|STR_DLG_NUMBERFORMAT_FOR_PERCENTAGE_VALUE"
msgid "Number Format for Percentage Value"
msgstr "백분율 값에 대한 숫자 형식"

#. DhnMn
#: chart2/uiconfig/ui/dlg_DataLabel.ui:259
msgctxt "dlg_DataLabel|CB_DATA_SERIES_NAME"
msgid "_Series name"
msgstr ""

#. 8bEui
#: chart2/uiconfig/ui/dlg_DataLabel.ui:267
msgctxt "dlg_DataLabel|extended_tip|CB_DATA_SERIES_NAME"
msgid "Shows the data series name in the label."
msgstr ""

#. mFeMA
#: chart2/uiconfig/ui/dlg_DataLabel.ui:288
msgctxt "dlg_DataLabel|label1"
msgid "Text Attributes"
msgstr "텍스트 속성"

#. FDBQW
#: chart2/uiconfig/ui/dlg_DataLabel.ui:322
msgctxt "dlg_DataLabel|FT_LABEL_PLACEMENT"
msgid "Place_ment"
msgstr "배치(_M)"

#. RBvRC
#: chart2/uiconfig/ui/dlg_DataLabel.ui:338
msgctxt "dlg_DataLabel|liststorePLACEMENT"
msgid "Best fit"
msgstr "자동 맞춤"

#. CFGTS
#: chart2/uiconfig/ui/dlg_DataLabel.ui:339
msgctxt "dlg_DataLabel|liststorePLACEMENT"
msgid "Center"
msgstr "중앙"

#. kxNDG
#: chart2/uiconfig/ui/dlg_DataLabel.ui:340
msgctxt "dlg_DataLabel|liststorePLACEMENT"
msgid "Above"
msgstr "위"

#. dnhiD
#: chart2/uiconfig/ui/dlg_DataLabel.ui:341
msgctxt "dlg_DataLabel|liststorePLACEMENT"
msgid "Top left"
msgstr "왼쪽 위"

#. TGuEk
#: chart2/uiconfig/ui/dlg_DataLabel.ui:342
msgctxt "dlg_DataLabel|liststorePLACEMENT"
msgid "Left"
msgstr "왼쪽"

#. eUxTR
#: chart2/uiconfig/ui/dlg_DataLabel.ui:343
msgctxt "dlg_DataLabel|liststorePLACEMENT"
msgid "Bottom left"
msgstr "왼쪽 아래"

#. CGQj7
#: chart2/uiconfig/ui/dlg_DataLabel.ui:344
msgctxt "dlg_DataLabel|liststorePLACEMENT"
msgid "Below"
msgstr "아래"

#. UJ7uQ
#: chart2/uiconfig/ui/dlg_DataLabel.ui:345
msgctxt "dlg_DataLabel|liststorePLACEMENT"
msgid "Bottom right"
msgstr "오른쪽 아래"

#. nEFuG
#: chart2/uiconfig/ui/dlg_DataLabel.ui:346
msgctxt "dlg_DataLabel|liststorePLACEMENT"
msgid "Right"
msgstr "오른쪽"

#. NQCGE
#: chart2/uiconfig/ui/dlg_DataLabel.ui:347
msgctxt "dlg_DataLabel|liststorePLACEMENT"
msgid "Top right"
msgstr "오른쪽 위"

#. UagUt
#: chart2/uiconfig/ui/dlg_DataLabel.ui:348
msgctxt "dlg_DataLabel|liststorePLACEMENT"
msgid "Inside"
msgstr "내부"

#. y25DL
#: chart2/uiconfig/ui/dlg_DataLabel.ui:349
msgctxt "dlg_DataLabel|liststorePLACEMENT"
msgid "Outside"
msgstr "외부"

#. 3HjyB
#: chart2/uiconfig/ui/dlg_DataLabel.ui:350
msgctxt "dlg_DataLabel|liststorePLACEMENT"
msgid "Near origin"
msgstr "원점 근처"

#. TMEug
#: chart2/uiconfig/ui/dlg_DataLabel.ui:354
msgctxt "dlg_DataLabel|extended_tip|LB_LABEL_PLACEMENT"
msgid "Selects the placement of data labels relative to the objects."
msgstr "데이터 레이블의 개체에 대한 상대적인 배치 위치를 선택합니다."

#. NvbuM
#: chart2/uiconfig/ui/dlg_DataLabel.ui:367
msgctxt "dlg_DataLabel|FT_TEXT_SEPARATOR"
msgid "_Separator"
msgstr "구분 기호(_S)"

#. m8qsr
#: chart2/uiconfig/ui/dlg_DataLabel.ui:383
msgctxt "dlg_DataLabel|liststoreSEPARATOR"
msgid "Space"
msgstr "공백"

#. d6M3S
#: chart2/uiconfig/ui/dlg_DataLabel.ui:384
msgctxt "dlg_DataLabel|liststoreSEPARATOR"
msgid "Comma"
msgstr "쉼표"

#. HUBkD
#: chart2/uiconfig/ui/dlg_DataLabel.ui:385
msgctxt "dlg_DataLabel|liststoreSEPARATOR"
msgid "Semicolon"
msgstr "세미콜론"

#. 3CaCX
#: chart2/uiconfig/ui/dlg_DataLabel.ui:386
msgctxt "dlg_DataLabel|liststoreSEPARATOR"
msgid "New line"
msgstr "새 줄"

#. CAtwB
#: chart2/uiconfig/ui/dlg_DataLabel.ui:387
msgctxt "dlg_DataLabel|liststoreSEPARATOR"
msgid "Period"
msgstr ""

#. 8Z3DJ
#: chart2/uiconfig/ui/dlg_DataLabel.ui:391
msgctxt "dlg_DataLabel|extended_tip|LB_TEXT_SEPARATOR"
msgid "Selects the separator between multiple text strings for the same object."
msgstr "같은 개체의 다중 문자열 사이를 구분할 구분자를 선택합니다."

#. oEFpN
#: chart2/uiconfig/ui/dlg_DataLabel.ui:406
msgctxt "dlg_DataLabel|label1"
msgid "Attribute Options"
msgstr ""

#. gE7CA
#: chart2/uiconfig/ui/dlg_DataLabel.ui:458
msgctxt "dlg_DataLabel|extended_tip|CT_DIAL"
msgid "Click in the dial to set the text orientation for the data labels."
msgstr "데이터 레이블에 대한 텍스트 방향을 설정하려면 다이얼을 클릭합니다."

#. MjCoG
#: chart2/uiconfig/ui/dlg_DataLabel.ui:479
msgctxt "dlg_DataLabel|extended_tip|NF_LABEL_DEGREES"
msgid "Enter the counterclockwise rotation angle for the data labels."
msgstr "데이터 레이블의 반시계 방향 회전 각도를 입력하십시오."

#. Jhjwb
#: chart2/uiconfig/ui/dlg_DataLabel.ui:493
msgctxt "dlg_DataLabel|FT_LABEL_DEGREES"
msgid "_Degrees"
msgstr "각도(_D)"

#. vtVy2
#: chart2/uiconfig/ui/dlg_DataLabel.ui:518
msgctxt "dlg_DataLabel|FT_LABEL_TEXTDIR"
msgid "Te_xt direction"
msgstr "텍스트 방향(_X)"

#. tjcHp
#: chart2/uiconfig/ui/dlg_DataLabel.ui:535
msgctxt "dlg_DataLabel|extended_tip|LB_LABEL_TEXTDIR"
msgid "Specify the text direction for a paragraph that uses complex text layout (CTL). This feature is only available if complex text layout support is enabled."
msgstr "복합 문자 언어(CTL)를 사용하는 단락의 텍스트 방향을 지정합니다. 이 기능은 복합 문자 언어 지원이 활성화되어 있는 경우에만 사용할 수 있습니다."

#. xpAEz
#: chart2/uiconfig/ui/dlg_DataLabel.ui:558
msgctxt "dlg_DataLabel|label2"
msgid "Rotate Text"
msgstr "텍스트 회전"

#. NpD8D
#: chart2/uiconfig/ui/dlg_DataLabel.ui:587
msgctxt "dlg_DataLabel|CB_CUSTOM_LEADER_LINES"
msgid "_Connect displaced data labels to data points"
msgstr ""

#. MJdmK
#: chart2/uiconfig/ui/dlg_DataLabel.ui:595
msgctxt "dlg_DataLabel|extended_tip|CB_CUSTOM_LEADER_LINES"
msgid "Draws a line connecting the data labels to the data points"
msgstr ""

#. UKVF9
#: chart2/uiconfig/ui/dlg_DataLabel.ui:611
msgctxt "dlg_DataLabel|label3"
msgid "Leader Lines"
msgstr ""

#. 2cE35
#: chart2/uiconfig/ui/dlg_DataLabel.ui:641
msgctxt "dlg_DataLabel|extended_tip|dlg_DataLabel"
msgid "Opens the Data Labels dialog, which enables you to set the data labels."
msgstr "데이터 레이블을 설정할 수 있는 데이터 레이블 대화 상자를 엽니다."

#. bt7D7
#: chart2/uiconfig/ui/dlg_DataLabel.ui:660
msgctxt "dlg_DataLabel|extended_tip|dlg_DataLabels"
msgid "Opens the Data Labels dialog, which enables you to set the data labels."
msgstr "데이터 레이블을 설정할 수 있는 데이터 레이블 대화 상자를 엽니다."

#. 3GUtp
#: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:28
msgctxt "dlg_InsertErrorBars|dlg_InsertErrorBars"
msgid "Legend"
msgstr "범례"

#. 9Wf9T
#: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:124
msgctxt "dlg_InsertErrorBars|RB_NONE"
msgid "_None"
msgstr "없음(_N)"

#. pvfsb
#: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:133
msgctxt "dlg_InsertErrorBars|extended_tip|RB_NONE"
msgid "Does not show any error bars."
msgstr "오차 막대를 표시하지 않습니다."

#. sMZoy
#: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:145
msgctxt "dlg_InsertErrorBars|RB_CONST"
msgid "_Constant Value"
msgstr "상수 값(_C)"

#. oDzF5
#: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:154
msgctxt "dlg_InsertErrorBars|extended_tip|RB_CONST"
msgid "Displays constant values that you specify in the Parameters area."
msgstr "매개 변수 영역에서 지정한 상수값을 표시합니다."

#. UzxQQ
#: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:166
msgctxt "dlg_InsertErrorBars|RB_PERCENT"
msgid "_Percentage"
msgstr "퍼센트(_P)"

#. bGDm2
#: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:175
msgctxt "dlg_InsertErrorBars|extended_tip|RB_PERCENT"
msgid "Displays a percentage. The display refers to the corresponding data point. Set the percentage in the Parameters area."
msgstr "백분율을 표시합니다. 표시 내용은 해당 데이터 요소를 나타냅니다. 매개 변수의 형식은 백분율입니다."

#. tSBH9
#: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:200
msgctxt "dlg_InsertErrorBars|extended_tip|RB_FUNCTION"
msgid "Select a function to calculate the error bars."
msgstr "오차 막대를 계산할 함수를 선택합니다."

#. fkUNn
#: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:215
msgctxt "dlg_InsertErrorBars|liststoreFUNCTION"
msgid "Standard Error"
msgstr "표준 오류"

#. zpc6d
#: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:216
msgctxt "dlg_InsertErrorBars|liststoreFUNCTION"
msgid "Standard Deviation"
msgstr "표준 편차"

#. wA6LE
#: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:217
msgctxt "dlg_InsertErrorBars|liststoreFUNCTION"
msgid "Variance"
msgstr "분산"

#. UASm3
#: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:218
msgctxt "dlg_InsertErrorBars|liststoreFUNCTION"
msgid "Error Margin"
msgstr "오차 한계"

#. vqTAT
#: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:222
msgctxt "dlg_InsertErrorBars|extended_tip|LB_FUNCTION"
msgid "Select a function to calculate the error bars."
msgstr "오차 막대를 계산할 함수를 선택합니다."

#. Z5yGF
#: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:241
msgctxt "dlg_InsertErrorBars|RB_RANGE"
msgid "Cell _Range"
msgstr "셀 범위(_R)"

#. Vm5iS
#: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:250
msgctxt "dlg_InsertErrorBars|extended_tip|RB_RANGE"
msgid "Click Cell Range and then specify a cell range from which to take the positive and negative error bar values."
msgstr "셀 범위를 클릭하고 양수 및 음수 오차 막대 값을 가져올 셀 범위를 지정합니다."

#. vdvVR
#: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:266
msgctxt "dlg_InsertErrorBars|label1"
msgid "Error Category"
msgstr "오류 범주"

#. oZaa3
#: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:296
msgctxt "dlg_InsertErrorBars|RB_BOTH"
msgid "Positive _and Negative"
msgstr "양수 및 음수(_A)"

#. aAhky
#: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:305
msgctxt "dlg_InsertErrorBars|extended_tip|RB_BOTH"
msgid "Shows positive and negative error bars."
msgstr "양수 및 음수 오차 막대 표시"

#. jJw8Y
#: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:316
msgctxt "dlg_InsertErrorBars|RB_POSITIVE"
msgid "Pos_itive"
msgstr "양수(_I)"

#. yXXuP
#: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:325
msgctxt "dlg_InsertErrorBars|extended_tip|RB_POSITIVE"
msgid "Shows only positive error bars."
msgstr "양수 오차 막대만 표시"

#. 6YgbM
#: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:336
msgctxt "dlg_InsertErrorBars|RB_NEGATIVE"
msgid "Ne_gative"
msgstr "음수(_G)"

#. KsYHq
#: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:345
msgctxt "dlg_InsertErrorBars|extended_tip|RB_NEGATIVE"
msgid "Shows only negative error bars."
msgstr "음수 오차 막대만 표시"

#. fkKQH
#: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:393
msgctxt "dlg_InsertErrorBars|label2"
msgid "Error Indicator"
msgstr "오류 표시기"

#. WWuZ8
#: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:437
msgctxt "dlg_InsertErrorBars|FT_POSITIVE"
msgid "P_ositive (+)"
msgstr "양수(_O) (+)"

#. EHq4d
#: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:456
msgctxt "dlg_InsertErrorBars|extended_tip|MF_POSITIVE"
msgid "Enter the value to add to the displayed value as the positive error value."
msgstr "양수 오류값으로 표시할 값으로 추가할 값을 입력하십시오."

#. SUBEs
#: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:475
msgctxt "dlg_InsertErrorBars|extended_tip|ED_RANGE_POSITIVE"
msgid "Enter the address range from where to get the positive error values. Use the Shrink button to select the range from a sheet."
msgstr "양수 오류값을 가져올 주소 범위를 입력하십시오. 축소 버튼을 이용해 시트에서 범위를 선택합니다."

#. 5FfdH
#: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:490
msgctxt "dlg_InsertErrorBars|IB_RANGE_POSITIVE|tooltip_text"
msgid "Select data range"
msgstr "데이터 범위 선택"

#. JYk3c
#: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:495
msgctxt "dlg_InsertErrorBars|extended_tip|IB_RANGE_POSITIVE"
msgid "Click a button to shrink the dialog, then use the mouse to select the cell range in the spreadsheet. Click the button again to restore the dialog to full size."
msgstr "버튼을 클릭하여 대화상자를 줄이고, 스프레드시트에서 셀 범위를 선택합니다. 그리고 전체 크기 버튼을 눌러 대화 상자를 복구시킵니다."

#. K9wAk
#: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:521
msgctxt "dlg_InsertErrorBars|FT_NEGATIVE"
msgid "_Negative (-)"
msgstr "음수(_N) (-)"

#. Hzr6X
#: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:540
msgctxt "dlg_InsertErrorBars|extended_tip|MF_NEGATIVE"
msgid "Enter the value to subtract from the displayed value as the negative error value."
msgstr "음수 오류값으로 표시될 값에서 삭제할 값을 입력하십시오."

#. DTR5D
#: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:559
msgctxt "dlg_InsertErrorBars|extended_tip|ED_RANGE_NEGATIVE"
msgid "Enter the address range from where to get the negative error values. Use the Shrink button to select the range from a sheet."
msgstr "음수 오류값을 가져올 주소 범위를 입력하십시오. 축소 버튼을 이용해 시트에서 범위를 선택합니다."

#. jsckc
#: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:574
msgctxt "dlg_InsertErrorBars|IB_RANGE_NEGATIVE|tooltip_text"
msgid "Select data range"
msgstr "데이터 범위 선택"

#. mEwUr
#: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:579
msgctxt "dlg_InsertErrorBars|extended_tip|IB_RANGE_NEGATIVE"
msgid "Click a button to shrink the dialog, then use the mouse to select the cell range in the spreadsheet. Click the button again to restore the dialog to full size."
msgstr "버튼을 클릭하여 대화상자를 줄이고, 스프레드시트에서 셀 범위를 선택합니다. 그리고 전체 크기 버튼을 눌러 대화 상자를 복구시킵니다."

#. GZS6d
#: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:598
msgctxt "dlg_InsertErrorBars|CB_SYN_POS_NEG"
msgid "Same value for both"
msgstr "양쪽에 같은 값"

#. wTppD
#: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:606
msgctxt "dlg_InsertErrorBars|extended_tip|CB_SYN_POS_NEG"
msgid "Enable to use the positive error values also as negative error values. You can only change the value of the \"Positive (+)\" box. That value gets copied to the \"Negative (-)\" box automatically."
msgstr "양수 오차값을 음수 오차값으로 사용합니다. \"양수(+)\" 상자의 값만 변경할 수 있으며, 입력한 값은 \"음수(-)\" 상자로 자동 복사됩니다."

#. ogVMg
#: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:622
msgctxt "dlg_InsertErrorBars|label3"
msgid "Parameters"
msgstr "매개 변수"

#. MXxxE
#: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:639
msgctxt "dlg_InsertErrorBars|STR_DATA_SELECT_RANGE_FOR_POSITIVE_ERRORBARS"
msgid "Select Range for Positive Error Bars"
msgstr "정오차 막대 범위 선택"

#. ixAQm
#: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:650
msgctxt "dlg_InsertErrorBars|STR_DATA_SELECT_RANGE_FOR_NEGATIVE_ERRORBARS"
msgid "Select Range for Negative Error Bars"
msgstr "부오차 막대 범위 선택"

#. 68LFy
#: chart2/uiconfig/ui/dlg_InsertErrorBars.ui:661
msgctxt "dlg_InsertErrorBars|STR_CONTROLTEXT_ERROR_BARS_FROM_DATA"
msgid "From Data Table"
msgstr "데이터 표에서"

#. 3G3Jo
#: chart2/uiconfig/ui/dlg_InsertLegend.ui:8
msgctxt "dlg_InsertLegend|dlg_InsertLegend"
msgid "Legend"
msgstr "범례"

#. TQUNp
#: chart2/uiconfig/ui/dlg_InsertLegend.ui:102
msgctxt "dlg_InsertLegend|show"
msgid "_Display legend"
msgstr "범례 표시(_D)"

#. BbrEG
#: chart2/uiconfig/ui/dlg_InsertLegend.ui:124
msgctxt "dlg_InsertLegend|left"
msgid "_Left"
msgstr "왼쪽 맞춤(_L)"

#. EdZ7j
#: chart2/uiconfig/ui/dlg_InsertLegend.ui:139
msgctxt "dlg_InsertLegend|right"
msgid "_Right"
msgstr "오른쪽(_R)"

#. PoZ9R
#: chart2/uiconfig/ui/dlg_InsertLegend.ui:154
msgctxt "dlg_InsertLegend|top"
msgid "_Top"
msgstr "위쪽(_T)"

#. Uvcht
#: chart2/uiconfig/ui/dlg_InsertLegend.ui:169
msgctxt "dlg_InsertLegend|bottom"
msgid "_Bottom"
msgstr "아래쪽(_B)"

#. bxdb5
#: chart2/uiconfig/ui/dlg_InsertLegend.ui:195
msgctxt "dlg_InsertLegend|TXT_POSITION"
msgid "Position"
msgstr "위치"

#. FAEct
#: chart2/uiconfig/ui/insertaxisdlg.ui:8
msgctxt "insertaxisdlg|InsertAxisDialog"
msgid "Axes"
msgstr "축"

#. 4Drc8
#: chart2/uiconfig/ui/insertaxisdlg.ui:102
msgctxt "insertaxisdlg|primaryX"
msgid "_X axis"
msgstr "_X 축"

#. QyAAw
#: chart2/uiconfig/ui/insertaxisdlg.ui:110
msgctxt "insertaxisdlg|extended_tip|primaryX"
msgid "Displays the X axis as a line with subdivisions."
msgstr "하위 분할선이 있는 X 축을 표시합니다."

#. XeWVu
#: chart2/uiconfig/ui/insertaxisdlg.ui:122
msgctxt "insertaxisdlg|primaryY"
msgid "_Y axis"
msgstr "_Y 축"

#. 8ZzUp
#: chart2/uiconfig/ui/insertaxisdlg.ui:130
msgctxt "insertaxisdlg|extended_tip|primaryY"
msgid "Displays the Y axis as a line with subdivisions."
msgstr "하위 분할선이 있는 선으로 Y 축을 표시합니다."

#. FoAXW
#: chart2/uiconfig/ui/insertaxisdlg.ui:142
msgctxt "insertaxisdlg|primaryZ"
msgid "_Z axis"
msgstr "_Z 축"

#. DgjxB
#: chart2/uiconfig/ui/insertaxisdlg.ui:150
msgctxt "insertaxisdlg|extended_tip|primaryZ"
msgid "Displays the Z axis as a line with subdivisions."
msgstr "하위 분할선이 있는 선으로 Z 축을 표시합니다."

#. YZ7GG
#: chart2/uiconfig/ui/insertaxisdlg.ui:167
msgctxt "insertaxisdlg|label1"
msgid "Axes"
msgstr "축"

#. WEUFf
#: chart2/uiconfig/ui/insertaxisdlg.ui:198
msgctxt "insertaxisdlg|secondaryX"
msgid "X _axis"
msgstr "X 축(_A)"

#. JGQhE
#: chart2/uiconfig/ui/insertaxisdlg.ui:206
msgctxt "insertaxisdlg|extended_tip|secondaryX"
msgid "Displays a secondary X axis in the chart."
msgstr "차트에 2차 X 축을 표시합니다."

#. 598Gk
#: chart2/uiconfig/ui/insertaxisdlg.ui:218
msgctxt "insertaxisdlg|secondaryY"
msgid "Y ax_is"
msgstr "Y 축(_I)"

#. trDFK
#: chart2/uiconfig/ui/insertaxisdlg.ui:226
msgctxt "insertaxisdlg|extended_tip|secondaryY"
msgid "The major axis and the secondary axis can have different scaling. For example, you can scale one axis to 2 in. and the other to 1.5 in. "
msgstr "주 축과 2차 축의 배율이 다를 수도 있습니다. 예를 들어, 축 하나는 2인치로, 다른 하나는 1.5인치로 배율을 조정할 수 있습니다. "

#. CAFjD
#: chart2/uiconfig/ui/insertaxisdlg.ui:238
msgctxt "insertaxisdlg|secondaryZ"
msgid "Z axi_s"
msgstr "Z 축(_S)"

#. 2LQwV
#: chart2/uiconfig/ui/insertaxisdlg.ui:258
msgctxt "insertaxisdlg|label2"
msgid "Secondary Axes"
msgstr "2차 축"

#. 7yEDE
#: chart2/uiconfig/ui/insertaxisdlg.ui:290
msgctxt "insertaxisdlg|extended_tip|InsertAxisDialog"
msgid "Specifies the axes to be displayed in the chart."
msgstr "차트에 표시할 축을 지정합니다."

#. 2eGKS
#: chart2/uiconfig/ui/insertgriddlg.ui:8
msgctxt "insertgriddlg|InsertGridDialog"
msgid "Grids"
msgstr "격자"

#. adEgJ
#: chart2/uiconfig/ui/insertgriddlg.ui:102
msgctxt "insertgriddlg|primaryX"
msgid "_X axis"
msgstr "_X 축"

#. TeVcH
#: chart2/uiconfig/ui/insertgriddlg.ui:110
msgctxt "insertgriddlg|extended_tip|primaryX"
msgid "Adds gridlines to the X axis of the chart."
msgstr "차트의 X 축에 눈금선을 추가합니다."

#. FEBZW
#: chart2/uiconfig/ui/insertgriddlg.ui:122
msgctxt "insertgriddlg|primaryY"
msgid "_Y axis"
msgstr "_Y 축"

#. 6SmKJ
#: chart2/uiconfig/ui/insertgriddlg.ui:130
msgctxt "insertgriddlg|extended_tip|primaryY"
msgid "Adds gridlines to the Y axis of the chart."
msgstr "차트의 Y 축에 눈금선을 추가합니다."

#. XEXTu
#: chart2/uiconfig/ui/insertgriddlg.ui:142
msgctxt "insertgriddlg|primaryZ"
msgid "_Z axis"
msgstr "_Z 축"

#. bF4Eb
#: chart2/uiconfig/ui/insertgriddlg.ui:150
msgctxt "insertgriddlg|extended_tip|primaryZ"
msgid "Adds gridlines to the Z axis of the chart."
msgstr "차트의 Z 축에 눈금선을 추가합니다."

#. 9QbAA
#: chart2/uiconfig/ui/insertgriddlg.ui:167
msgctxt "insertgriddlg|label1"
msgid "Major Grids"
msgstr "주 격자"

#. wqXds
#: chart2/uiconfig/ui/insertgriddlg.ui:198
msgctxt "insertgriddlg|secondaryX"
msgid "X _axis"
msgstr "X 축(_A)"

#. cfAUn
#: chart2/uiconfig/ui/insertgriddlg.ui:206
msgctxt "insertgriddlg|extended_tip|secondaryX"
msgid "Adds gridlines that subdivide the X axis into smaller sections."
msgstr "X 축을 더 작은 섹션으로 세분화하는 눈금선을 추가합니다."

#. PkzaY
#: chart2/uiconfig/ui/insertgriddlg.ui:218
msgctxt "insertgriddlg|secondaryY"
msgid "Y ax_is"
msgstr "Y 축(_I)"

#. a3asH
#: chart2/uiconfig/ui/insertgriddlg.ui:226
msgctxt "insertgriddlg|extended_tip|secondaryY"
msgid "Adds gridlines that subdivide the Y axis into smaller sections."
msgstr "Y 축을 더 작은 섹션으로 세분화하는 눈금선을 추가합니다."

#. CcCG8
#: chart2/uiconfig/ui/insertgriddlg.ui:238
msgctxt "insertgriddlg|secondaryZ"
msgid "Z axi_s"
msgstr "Z 축(_S)"

#. hcj99
#: chart2/uiconfig/ui/insertgriddlg.ui:246
msgctxt "insertgriddlg|extended_tip|secondaryZ"
msgid "Adds gridlines that subdivide the Z axis into smaller sections."
msgstr "X 축을 더 작은 섹션으로 세분화하는 눈금선을 추가합니다."

#. QBQD4
#: chart2/uiconfig/ui/insertgriddlg.ui:263
msgctxt "insertgriddlg|label2"
msgid "Minor Grids"
msgstr "보조 격자"

#. URB9E
#: chart2/uiconfig/ui/insertgriddlg.ui:295
msgctxt "insertgriddlg|extended_tip|InsertGridDialog"
msgid "You can divide the axes into sections by assigning gridlines to them. This allows you to get a better overview of the chart, especially if you are working with large charts."
msgstr "눈금선을 할당하여 축을 구역으로 구분할 수 있습니다. 특히 큰 차트로 작업하는 경우 축을 구역으로 구분하면 차트의 개요를 쉽게 파악할 수 있습니다."

#. rqADt
#: chart2/uiconfig/ui/inserttitledlg.ui:8
msgctxt "inserttitledlg|InsertTitleDialog"
msgid "Titles"
msgstr "제목"

#. pAKf8
#: chart2/uiconfig/ui/inserttitledlg.ui:92
msgctxt "inserttitledlg|labelMainTitle"
msgid "_Title"
msgstr "제목(_T)"

#. ZBgRn
#: chart2/uiconfig/ui/inserttitledlg.ui:106
msgctxt "inserttitledlg|labelSubTitle"
msgid "_Subtitle"
msgstr "부제(_S)"

#. aCRZ7
#: chart2/uiconfig/ui/inserttitledlg.ui:125
msgctxt "inserttitledlg|extended_tip|maintitle"
msgid "Enter the desired title for the chart."
msgstr "원하는 차트 제목을 입력하십시오."

#. 5eiq7
#: chart2/uiconfig/ui/inserttitledlg.ui:143
msgctxt "inserttitledlg|extended_tip|subtitle"
msgid "Enter the desired subtitle for the chart."
msgstr "원하는 차트 부제를 입력하십시오."

#. y8KiH
#: chart2/uiconfig/ui/inserttitledlg.ui:178
msgctxt "inserttitledlg|labelPrimaryXaxis"
msgid "_X axis"
msgstr "_X 축"

#. RhsUT
#: chart2/uiconfig/ui/inserttitledlg.ui:192
msgctxt "inserttitledlg|labelPrimaryYaxis"
msgid "_Y axis"
msgstr "_Y 축"

#. ypJFt
#: chart2/uiconfig/ui/inserttitledlg.ui:206
msgctxt "inserttitledlg|labelPrimaryZaxis"
msgid "_Z axis"
msgstr "_Z 축"

#. qz8WP
#: chart2/uiconfig/ui/inserttitledlg.ui:225
msgctxt "inserttitledlg|extended_tip|primaryXaxis"
msgid "Enter the desired title for the X axis of the chart."
msgstr "차트의 X 축 제목을 입력하십시오."

#. 3m5Dk
#: chart2/uiconfig/ui/inserttitledlg.ui:243
msgctxt "inserttitledlg|extended_tip|primaryYaxis"
msgid "Enter the desired title for the Y axis of the chart."
msgstr "차트의 Y 축 제목을 입력하십시오."

#. PY2EU
#: chart2/uiconfig/ui/inserttitledlg.ui:261
msgctxt "inserttitledlg|extended_tip|primaryZaxis"
msgid "Enter the desired title for the Z axis of the chart."
msgstr "차트의 Z 축 제목을 입력하십시오."

#. aHvzY
#: chart2/uiconfig/ui/inserttitledlg.ui:276
msgctxt "inserttitledlg|Axe"
msgid "Axes"
msgstr "축"

#. 8XRFP
#: chart2/uiconfig/ui/inserttitledlg.ui:308
msgctxt "inserttitledlg|labelSecondaryXAxis"
msgid "X _axis"
msgstr "X 축(_A)"

#. Tq7G9
#: chart2/uiconfig/ui/inserttitledlg.ui:322
msgctxt "inserttitledlg|labelSecondaryYAxis"
msgid "Y ax_is"
msgstr "Y 축(_I)"

#. EsHDi
#: chart2/uiconfig/ui/inserttitledlg.ui:341
msgctxt "inserttitledlg|extended_tip|secondaryXaxis"
msgid "Enter the desired secondary title for the X axis of the chart."
msgstr "차트의 2차 X 축에 제목을 입력하십시오."

#. bnwti
#: chart2/uiconfig/ui/inserttitledlg.ui:359
msgctxt "inserttitledlg|extended_tip|secondaryYaxis"
msgid "Enter the desired secondary title for the Y axis of the chart."
msgstr "차트의 2차 Y 축에 제목을 입력하십시오."

#. XvJwD
#: chart2/uiconfig/ui/inserttitledlg.ui:374
msgctxt "inserttitledlg|label2"
msgid "Secondary Axes"
msgstr "2차 축"

#. Y96AE
#: chart2/uiconfig/ui/inserttitledlg.ui:406
msgctxt "inserttitledlg|extended_tip|InsertTitleDialog"
msgid "Opens a dialog to enter or modify the titles in a chart."
msgstr "차트 제목을 입력하거나 수정할 수 있는 대화 상자를 엽니다."

#. 23FsQ
#: chart2/uiconfig/ui/paradialog.ui:8
msgctxt "paradialog|ParagraphDialog"
msgid "Paragraph"
msgstr "단락"

#. 6xRiy
#: chart2/uiconfig/ui/paradialog.ui:135
msgctxt "paradialog|labelTP_PARA_STD"
msgid "Indents & Spacing"
msgstr "들여쓰기 및 간격"

#. PRo68
#: chart2/uiconfig/ui/paradialog.ui:182
msgctxt "paradialog|labelTP_PARA_ALIGN"
msgid "Alignment"
msgstr "맞춤"

#. EB5A9
#: chart2/uiconfig/ui/paradialog.ui:231
msgctxt "paradialog|labelTP_PARA_ASIAN"
msgid "Asian Typography"
msgstr "한글 입력 체계"

#. BzbWJ
#: chart2/uiconfig/ui/paradialog.ui:279
msgctxt "paradialog|labelTP_TABULATOR"
msgid "Tabs"
msgstr "탭"

#. jEDem
#: chart2/uiconfig/ui/sidebaraxis.ui:24
msgctxt "sidebaraxis|checkbutton_show_label"
msgid "Show labels"
msgstr "레이블 표시"

#. 52BFU
#: chart2/uiconfig/ui/sidebaraxis.ui:38
msgctxt "sidebaraxis|checkbutton_reverse"
msgid "Reverse direction"
msgstr "역방향"

#. hABaw
#: chart2/uiconfig/ui/sidebaraxis.ui:63
msgctxt "sidebaraxis|label1"
msgid "_Label position:"
msgstr "레이블 위치(_L):"

#. JpV6N
#: chart2/uiconfig/ui/sidebaraxis.ui:77
msgctxt "sidebaraxis|comboboxtext_label_position"
msgid "Near Axis"
msgstr "가까운 축"

#. HEMNB
#: chart2/uiconfig/ui/sidebaraxis.ui:78
msgctxt "sidebaraxis|comboboxtext_label_position"
msgid "Near Axis (other side)"
msgstr "가까운 축(반대편)"

#. BE2dT
#: chart2/uiconfig/ui/sidebaraxis.ui:79
msgctxt "sidebaraxis|comboboxtext_label_position"
msgid "Outside start"
msgstr "바깥쬭 시작"

#. rH94z
#: chart2/uiconfig/ui/sidebaraxis.ui:80
msgctxt "sidebaraxis|comboboxtext_label_position"
msgid "Outside end"
msgstr "바깥쪽 끝"

#. 69LSe
#: chart2/uiconfig/ui/sidebaraxis.ui:94
msgctxt "sidebaraxis|label2"
msgid "_Text orientation:"
msgstr "문자열 방향(_T):"

#. Bqqg6
#: chart2/uiconfig/ui/sidebarelements.ui:34
msgctxt "sidebarelements|checkbutton_title"
msgid "Title"
msgstr "제목"

#. HttnZ
#: chart2/uiconfig/ui/sidebarelements.ui:51
msgctxt "sidebarelements|checkbutton_subtitle"
msgid "Subtitle"
msgstr "부제"

#. vkhjB
#: chart2/uiconfig/ui/sidebarelements.ui:102
msgctxt "sidebarelements|l"
msgid "Titles"
msgstr "제목"

#. dB6pP
#: chart2/uiconfig/ui/sidebarelements.ui:131
msgctxt "sidebarelements|checkbutton_legend"
msgid "Show legend"
msgstr ""

#. XxG3r
#: chart2/uiconfig/ui/sidebarelements.ui:135
msgctxt "sidebarelements|checkbutton_legend|tooltip_text"
msgid "Show Legend"
msgstr "범례 보이기"

#. zszn2
#: chart2/uiconfig/ui/sidebarelements.ui:156
msgctxt "sidebarelements|placement_label"
msgid "_Placement:"
msgstr "배치(_P):"

#. N9Vw3
#: chart2/uiconfig/ui/sidebarelements.ui:172
msgctxt "sidebarelements|comboboxtext_legend"
msgid "Right"
msgstr "오른쪽"

#. XWGfH
#: chart2/uiconfig/ui/sidebarelements.ui:173
msgctxt "sidebarelements|comboboxtext_legend"
msgid "Top"
msgstr "위"

#. AYbfc
#: chart2/uiconfig/ui/sidebarelements.ui:174
msgctxt "sidebarelements|comboboxtext_legend"
msgid "Bottom"
msgstr "아래"

#. Hdrnv
#: chart2/uiconfig/ui/sidebarelements.ui:175
msgctxt "sidebarelements|comboboxtext_legend"
msgid "Left"
msgstr "왼쪽"

#. WxtCZ
#: chart2/uiconfig/ui/sidebarelements.ui:193
msgctxt "sidebarelements|checkbutton_no_overlay"
msgid "Show the legend without overlapping the chart"
msgstr ""

#. UVbZR
#: chart2/uiconfig/ui/sidebarelements.ui:212
msgctxt "sidebarelements|label_legen"
msgid "Legend"
msgstr "범례"

#. Am6Gz
#: chart2/uiconfig/ui/sidebarelements.ui:242
msgctxt "sidebarelements|checkbutton_x_axis"
msgid "X axis"
msgstr "X 축"

#. P5gxx
#: chart2/uiconfig/ui/sidebarelements.ui:256
msgctxt "sidebarelements|checkbutton_x_axis_title"
msgid "X axis title"
msgstr "X 축 제목"

#. iMXPp
#: chart2/uiconfig/ui/sidebarelements.ui:270
msgctxt "sidebarelements|checkbutton_y_axis"
msgid "Y axis"
msgstr "Y 축"

#. vF4oS
#: chart2/uiconfig/ui/sidebarelements.ui:284
msgctxt "sidebarelements|checkbutton_y_axis_title"
msgid "Y axis title"
msgstr "Y 축 제목"

#. A35cf
#: chart2/uiconfig/ui/sidebarelements.ui:298
msgctxt "sidebarelements|checkbutton_z_axis"
msgid "Z axis"
msgstr "Z 축"

#. RZFAU
#: chart2/uiconfig/ui/sidebarelements.ui:312
msgctxt "sidebarelements|checkbutton_z_axis_title"
msgid "Z axis title"
msgstr "Z 축 제목"

#. GoJDH
#: chart2/uiconfig/ui/sidebarelements.ui:326
msgctxt "sidebarelements|checkbutton_2nd_x_axis"
msgid "2nd X axis"
msgstr "2차 X 축"

#. nsoDZ
#: chart2/uiconfig/ui/sidebarelements.ui:339
msgctxt "sidebarelements|checkbutton_2nd_x_axis_title"
msgid "2nd X axis title"
msgstr "2차 X 축 제목"

#. bGsCM
#: chart2/uiconfig/ui/sidebarelements.ui:352
msgctxt "sidebarelements|checkbutton_2nd_y_axis"
msgid "2nd Y axis"
msgstr "2차 Y 축"

#. yDNuy
#: chart2/uiconfig/ui/sidebarelements.ui:365
msgctxt "sidebarelements|checkbutton_2nd_y_axis_title"
msgid "2nd Y axis title"
msgstr "2차 Y 축 제목"

#. ScLEM
#: chart2/uiconfig/ui/sidebarelements.ui:382
msgctxt "sidebarelements|label_axes"
msgid "Axes"
msgstr "축"

#. RL8AA
#: chart2/uiconfig/ui/sidebarelements.ui:412
msgctxt "sidebarelements|checkbutton_gridline_horizontal_major"
msgid "Horizontal major"
msgstr "가로 주선"

#. FYBSZ
#: chart2/uiconfig/ui/sidebarelements.ui:426
msgctxt "sidebarelements|checkbutton_gridline_vertical_major"
msgid "Vertical major"
msgstr "세로 주선"

#. VCTTS
#: chart2/uiconfig/ui/sidebarelements.ui:440
msgctxt "sidebarelements|checkbutton_gridline_horizontal_minor"
msgid "Horizontal minor"
msgstr "가로 보조선"

#. QDFEZ
#: chart2/uiconfig/ui/sidebarelements.ui:454
msgctxt "sidebarelements|checkbutton_gridline_vertical_minor"
msgid "Vertical minor"
msgstr "세로 보조선"

#. yeE2v
#: chart2/uiconfig/ui/sidebarelements.ui:472
msgctxt "sidebarelements|label_gri"
msgid "Gridlines"
msgstr "눈금선"

#. uacDo
#: chart2/uiconfig/ui/sidebarelements.ui:493
msgctxt "sidebarelements|text_title"
msgid "Title"
msgstr "제목"

#. jXGDE
#: chart2/uiconfig/ui/sidebarelements.ui:504
msgctxt "sidebarelements|text_subtitle"
msgid "Subtitle"
msgstr "부제"

#. SCPM4
#: chart2/uiconfig/ui/sidebarerrorbar.ui:60
msgctxt "sidebarerrorbar|label2"
msgid "Category:"
msgstr "범주:"

#. 8Pb84
#: chart2/uiconfig/ui/sidebarerrorbar.ui:74
msgctxt "sidebarerrorbar|comboboxtext_type"
msgid "Constant"
msgstr "상수"

#. Lz8Lo
#: chart2/uiconfig/ui/sidebarerrorbar.ui:75
msgctxt "sidebarerrorbar|comboboxtext_type"
msgid "Percentage"
msgstr "백분율"

#. Ap367
#: chart2/uiconfig/ui/sidebarerrorbar.ui:76
msgctxt "sidebarerrorbar|comboboxtext_type"
msgid "Cell Range or Data Table"
msgstr "셀 범위/데이터 테이블"

#. Lqw6L
#: chart2/uiconfig/ui/sidebarerrorbar.ui:77
msgctxt "sidebarerrorbar|comboboxtext_type"
msgid "Standard deviation"
msgstr "표준 편차"

#. qUL78
#: chart2/uiconfig/ui/sidebarerrorbar.ui:78
msgctxt "sidebarerrorbar|comboboxtext_type"
msgid "Standard error"
msgstr "표준 오류"

#. KUCgB
#: chart2/uiconfig/ui/sidebarerrorbar.ui:79
msgctxt "sidebarerrorbar|comboboxtext_type"
msgid "Variance"
msgstr "분산"

#. QDwJu
#: chart2/uiconfig/ui/sidebarerrorbar.ui:80
msgctxt "sidebarerrorbar|comboboxtext_type"
msgid "Error margin"
msgstr "오차 한계"

#. US82z
#: chart2/uiconfig/ui/sidebarerrorbar.ui:93
msgctxt "sidebarerrorbar|label3"
msgid "Positive (+):"
msgstr "양수 (+):"

#. NJdbG
#: chart2/uiconfig/ui/sidebarerrorbar.ui:105
msgctxt "sidebarerrorbar|label4"
msgid "Negative (-):"
msgstr "음수 (-):"

#. GBewc
#: chart2/uiconfig/ui/sidebarerrorbar.ui:117
msgctxt "sidebarerrorbar|spinbutton_pos"
msgid "0.00"
msgstr "0.00"

#. e3GvR
#: chart2/uiconfig/ui/sidebarerrorbar.ui:132
msgctxt "sidebarerrorbar|spinbutton_neg"
msgid "0.00"
msgstr "0.00"

#. 34Vax
#: chart2/uiconfig/ui/sidebarerrorbar.ui:152
msgctxt "sidebarerrorbar|radiobutton_positive_negative|tooltip_text"
msgid "Positive and Negative"
msgstr "양수와 음수"

#. gETvJ
#: chart2/uiconfig/ui/sidebarerrorbar.ui:169
msgctxt "sidebarerrorbar|radiobutton_positive|tooltip_text"
msgid "Positive"
msgstr "양수"

#. 3Ur2d
#: chart2/uiconfig/ui/sidebarerrorbar.ui:186
msgctxt "sidebarerrorbar|radiobutton_negative|tooltip_text"
msgid "Negative"
msgstr "음수"

#. iCPU4
#: chart2/uiconfig/ui/sidebarerrorbar.ui:209
msgctxt "sidebarerrorbar|label5"
msgid "Indicator"
msgstr "설명 표시자"

#. qJBsd
#: chart2/uiconfig/ui/sidebarseries.ui:41
msgctxt "sidebarseries|checkbutton_label"
msgid "Show data labels"
msgstr "데이터 레이블 표시"

#. BsC9D
#: chart2/uiconfig/ui/sidebarseries.ui:64
msgctxt "sidebarseries|label_box"
msgid "P_lacement:"
msgstr "배치(_L):"

#. Dk3GN
#: chart2/uiconfig/ui/sidebarseries.ui:79
msgctxt "sidebarseries|comboboxtext_label"
msgid "Above"
msgstr "위"

#. e4znD
#: chart2/uiconfig/ui/sidebarseries.ui:80
msgctxt "sidebarseries|comboboxtext_label"
msgid "Below"
msgstr "아래"

#. CWwzt
#: chart2/uiconfig/ui/sidebarseries.ui:81
msgctxt "sidebarseries|comboboxtext_label"
msgid "Center"
msgstr "중앙"

#. osWVq
#: chart2/uiconfig/ui/sidebarseries.ui:82
msgctxt "sidebarseries|comboboxtext_label"
msgid "Outside"
msgstr "외부"

#. U3N4S
#: chart2/uiconfig/ui/sidebarseries.ui:83
msgctxt "sidebarseries|comboboxtext_label"
msgid "Inside"
msgstr "내부"

#. pAmg7
#: chart2/uiconfig/ui/sidebarseries.ui:84
msgctxt "sidebarseries|comboboxtext_label"
msgid "Near origin"
msgstr "원점 근처"

#. erC9C
#: chart2/uiconfig/ui/sidebarseries.ui:109
msgctxt "sidebarseries|checkbutton_trendline"
msgid "Show trendline"
msgstr "추세선 표시"

#. bXUND
#: chart2/uiconfig/ui/sidebarseries.ui:140
msgctxt "sidebarseries|checkbutton_y_error"
msgid "Y error bars"
msgstr "Y 오차 막대"

#. zK6DE
#: chart2/uiconfig/ui/sidebarseries.ui:155
msgctxt "sidebarseries|checkbutton_x_error"
msgid "X error bars"
msgstr "X 오차 막대"

#. FFPa2
#: chart2/uiconfig/ui/sidebarseries.ui:174
msgctxt "sidebarseries|label1"
msgid "Error Bars"
msgstr "오차 막대"

#. vhdnt
#: chart2/uiconfig/ui/sidebarseries.ui:203
msgctxt "sidebarseries|radiobutton_primary_axis"
msgid "Primary Y axis"
msgstr "1차 Y 축"

#. VPWVq
#: chart2/uiconfig/ui/sidebarseries.ui:219
msgctxt "sidebarseries|radiobutton_secondary_axis"
msgid "Secondary Y axis"
msgstr "2차 Y 축"

#. qE5HF
#: chart2/uiconfig/ui/sidebarseries.ui:239
msgctxt "sidebarseries|axis_label"
msgid "Align Series to Axis"
msgstr "데이터 계열을 축에 맞춤"

#. fvnkG
#: chart2/uiconfig/ui/sidebarseries.ui:255
msgctxt "sidebarseries|label_series_tmpl"
msgid "Data series '%1'"
msgstr "데이터 계열 '%1'"

#. mZfrk
#: chart2/uiconfig/ui/sidebartype.ui:85
msgctxt "sidebartype|3dlook"
msgid "_3D Look"
msgstr ""

#. mjrkY
#: chart2/uiconfig/ui/sidebartype.ui:104
msgctxt "sidebartype|3dscheme"
msgid "Simple"
msgstr ""

#. urfc7
#: chart2/uiconfig/ui/sidebartype.ui:105
msgctxt "sidebartype|3dscheme"
msgid "Realistic"
msgstr "사실적"

#. gYXXE
#: chart2/uiconfig/ui/sidebartype.ui:126
msgctxt "sidebartype|shapeft"
msgid "Sh_ape"
msgstr "모양(_A)"

#. B6KS5
#: chart2/uiconfig/ui/sidebartype.ui:187
msgctxt "sidebartype|stack"
msgid "_Stack series"
msgstr "순서 누적(_S)"

#. Yau6n
#: chart2/uiconfig/ui/sidebartype.ui:207
msgctxt "sidebartype|ontop"
msgid "On top"
msgstr "상단"

#. f2J43
#: chart2/uiconfig/ui/sidebartype.ui:221
msgctxt "sidebartype|percent"
msgid "Percent"
msgstr "백분율"

#. iDSaa
#: chart2/uiconfig/ui/sidebartype.ui:235
msgctxt "sidebartype|deep"
msgid "Deep"
msgstr ""

#. KaS7Z
#: chart2/uiconfig/ui/sidebartype.ui:263
msgctxt "sidebartype|linetypeft"
msgid "_Line type"
msgstr "선 종류(_L)"

#. Hqc3N
#: chart2/uiconfig/ui/sidebartype.ui:278
msgctxt "sidebartype|linetype"
msgid "Straight"
msgstr "직선"

#. EB58Z
#: chart2/uiconfig/ui/sidebartype.ui:279
msgctxt "sidebartype|linetype"
msgid "Smooth"
msgstr ""

#. qLn3k
#: chart2/uiconfig/ui/sidebartype.ui:280
msgctxt "sidebartype|linetype"
msgid "Stepped"
msgstr "계단형"

#. jKDXh
#: chart2/uiconfig/ui/sidebartype.ui:290
msgctxt "sidebartype|properties"
msgid "Properties..."
msgstr "속성..."

#. xW9CQ
#: chart2/uiconfig/ui/sidebartype.ui:308
msgctxt "sidebartype|sort"
msgid "_Sort by X values"
msgstr "X값에 따라 정렬(_S)"

#. thu3G
#: chart2/uiconfig/ui/sidebartype.ui:330
msgctxt "sidebartype|nolinesft"
msgid "_Number of lines"
msgstr "줄 수(_N)"

#. Ledzw
#: chart2/uiconfig/ui/smoothlinesdlg.ui:22
msgctxt "smoothlinesdlg|SmoothLinesDialog"
msgid "Smooth Lines"
msgstr "부드러운 선"

#. vmRbz
#: chart2/uiconfig/ui/smoothlinesdlg.ui:114
msgctxt "smoothlinesdlg|TypeLabel"
msgid "Line _Type:"
msgstr "선 모양(_T):"

#. Nkqhi
#: chart2/uiconfig/ui/smoothlinesdlg.ui:131
msgctxt "smoothlinesdlg|SplineTypeComboBox"
msgid "Cubic spline"
msgstr "삼차 스플라인(Cubic spline)"

#. LTCVw
#: chart2/uiconfig/ui/smoothlinesdlg.ui:132
msgctxt "smoothlinesdlg|SplineTypeComboBox"
msgid "B-spline"
msgstr "B-스플라인"

#. EJdNq
#: chart2/uiconfig/ui/smoothlinesdlg.ui:136
msgctxt "smoothlinesdlg|extended_tip|SplineTypeComboBox"
msgid "Apply a line curve model."
msgstr "곡선 모델 적용하기"

#. eecxc
#: chart2/uiconfig/ui/smoothlinesdlg.ui:167
msgctxt "smoothlinesdlg|ResolutionLabel"
msgid "_Resolution:"
msgstr "해상도(_R):"

#. AdG5v
#: chart2/uiconfig/ui/smoothlinesdlg.ui:181
msgctxt "smoothlinesdlg|PolynomialsLabel"
msgid "_Degree of polynomials:"
msgstr "다항식의 차수(_D):"

#. X35yY
#: chart2/uiconfig/ui/smoothlinesdlg.ui:199
msgctxt "smoothlinesdlg|extended_tip|ResolutionSpinbutton"
msgid "Set the resolution."
msgstr "해상도를 설정합니다."

#. a4btg
#: chart2/uiconfig/ui/smoothlinesdlg.ui:217
msgctxt "smoothlinesdlg|extended_tip|PolynomialsSpinButton"
msgid "Set the degree of the polynomials."
msgstr "해상도를 설정합니다."

#. YECJR
#: chart2/uiconfig/ui/smoothlinesdlg.ui:249
msgctxt "smoothlinesdlg|extended_tip|SmoothLinesDialog"
msgid "Apply a line curve model."
msgstr "곡선 모델 적용하기"

#. RyJg5
#: chart2/uiconfig/ui/steppedlinesdlg.ui:128
msgctxt "steppedlinesdlg|step_start_rb"
msgid "_Start with horizontal line"
msgstr "가로선으로 시작하기(_S)"

#. Zcr4L
#: chart2/uiconfig/ui/steppedlinesdlg.ui:137
msgctxt "steppedlinesdlg|extended_tip|step_start_rb"
msgid "Start with horizontal line and step up vertically at the end."
msgstr "가로선으로 시작하고, 세로선으로 끝납니다."

#. iJCAt
#: chart2/uiconfig/ui/steppedlinesdlg.ui:148
msgctxt "steppedlinesdlg|step_center_x_rb"
msgid "Step at the _horizontal mean"
msgstr "가로 중간에서 계단 시작(_H)"

#. D5DGL
#: chart2/uiconfig/ui/steppedlinesdlg.ui:157
msgctxt "steppedlinesdlg|extended_tip|step_center_x_rb"
msgid "Start to step up vertically and end with horizontal line."
msgstr "세로선으로 시작하고, 가로선으로 끝납니다."

#. vtGik
#: chart2/uiconfig/ui/steppedlinesdlg.ui:168
msgctxt "steppedlinesdlg|step_end_rb"
msgid "_End with horizontal line"
msgstr "가로선으로 끝내기(_E)"

#. nGAhe
#: chart2/uiconfig/ui/steppedlinesdlg.ui:177
msgctxt "steppedlinesdlg|extended_tip|step_end_rb"
msgid "Start with horizontal line, step up vertically in the middle of the X values and end with horizontal line."
msgstr "가로선으로 시작하여 X 값의 중간에서 세로선을 사용하고, 다시 가로선으로 끝납니다."

#. X3536
#: chart2/uiconfig/ui/steppedlinesdlg.ui:188
msgctxt "steppedlinesdlg|step_center_y_rb"
msgid "Step to the _vertical mean"
msgstr "세로 중간에서 계단 시작(_V)"

#. S528C
#: chart2/uiconfig/ui/steppedlinesdlg.ui:197
msgctxt "steppedlinesdlg|extended_tip|step_center_y_rb"
msgid "Start to step up vertically to the middle of the Y values, draw a horizontal line and finish by stepping vertically to the end."
msgstr "Y 값의 중간까지 세로선을 그은 다음 가로선을 긋고, 마지막에는 세로선으로 끝납니다."

#. oDDMr
#: chart2/uiconfig/ui/steppedlinesdlg.ui:223
msgctxt "steppedlinesdlg|label2"
msgid "Type of Stepping"
msgstr "단계 유형"

#. K2DaE
#: chart2/uiconfig/ui/titlerotationtabpage.ui:43
msgctxt "titlerotationtabpage|extended_tip|OrientDegree"
msgid "Allows you to manually enter the orientation angle."
msgstr "수동으로 방향 각도를 입력할 수 있게 해줍니다."

#. ViJ9k
#: chart2/uiconfig/ui/titlerotationtabpage.ui:57
msgctxt "titlerotationtabpage|degreeL"
msgid "_Degrees"
msgstr "각도(_D)"

#. tv9xJ
#: chart2/uiconfig/ui/titlerotationtabpage.ui:92
msgctxt "titlerotationtabpage|stackedCB"
msgid "Ve_rtically stacked"
msgstr "수직 누적(_R)"

#. VGDph
#: chart2/uiconfig/ui/titlerotationtabpage.ui:101
msgctxt "titlerotationtabpage|extended_tip|stackedCB"
msgid "Assigns vertical text orientation for cell contents."
msgstr "셀 내용의 텍스트 방향을 세로로 지정합니다."

#. 3BaMa
#: chart2/uiconfig/ui/titlerotationtabpage.ui:113
msgctxt "titlerotationtabpage|labelABCD"
msgid "ABCD"
msgstr "ABCD"

#. dAHWb
#: chart2/uiconfig/ui/titlerotationtabpage.ui:130
msgctxt "titlerotationtabpage|textdirL"
msgid "Te_xt direction:"
msgstr "텍스트 방향(_X):"

#. i5UYm
#: chart2/uiconfig/ui/titlerotationtabpage.ui:144
msgctxt "titlerotationtabpage|extended_tip|textdirLB"
msgid "Specify the text direction for a paragraph that uses complex text layout (CTL). This feature is only available if complex text layout support is enabled."
msgstr "복합 문자 언어(CTL)를 사용하는 단락의 텍스트 방향을 지정합니다. 이 기능은 복합 문자 언어 지원이 활성화되어 있는 경우에만 사용할 수 있습니다."

#. 9cDiw
#: chart2/uiconfig/ui/titlerotationtabpage.ui:163
msgctxt "titlerotationtabpage|extended_tip|dialCtrl"
msgid "Clicking anywhere on the wheel defines the variable text orientation."
msgstr "휠의 아무 곳이나 클릭하여 텍스트 방향을 다양하게 지정할 수 있습니다."

#. syx89
#: chart2/uiconfig/ui/titlerotationtabpage.ui:178
msgctxt "titlerotationtabpage|labelTextOrient"
msgid "Text Orientation"
msgstr "텍스트 방향"

#. CDDxo
#: chart2/uiconfig/ui/tp_3D_SceneAppearance.ui:20
msgctxt "tp_3D_SceneAppearance|FT_SCHEME"
msgid "Sche_me"
msgstr "도표(_M)"

#. 4uCgf
#: chart2/uiconfig/ui/tp_3D_SceneAppearance.ui:36
msgctxt "tp_3D_SceneAppearance|liststoreSCHEME"
msgid "Simple"
msgstr "단순"

#. uVRvv
#: chart2/uiconfig/ui/tp_3D_SceneAppearance.ui:37
msgctxt "tp_3D_SceneAppearance|liststoreSCHEME"
msgid "Realistic"
msgstr "사실적"

#. tFKjs
#: chart2/uiconfig/ui/tp_3D_SceneAppearance.ui:38
msgctxt "tp_3D_SceneAppearance|liststoreSCHEME"
msgid "Custom"
msgstr "사용자 정의"

#. raML6
#: chart2/uiconfig/ui/tp_3D_SceneAppearance.ui:42
msgctxt "tp_3D_SceneAppearance|extended_tip|LB_SCHEME"
msgid "Select a scheme from the list box, or click any of the check boxes below."
msgstr "목록 상자에서 구성표를 선택하거나 아래 확인란 중 하나를 클릭합니다."

#. EyGsf
#: chart2/uiconfig/ui/tp_3D_SceneAppearance.ui:78
msgctxt "tp_3D_SceneAppearance|CB_SHADING"
msgid "_Shading"
msgstr "그림자 효과(_S)"

#. W68hV
#: chart2/uiconfig/ui/tp_3D_SceneAppearance.ui:86
msgctxt "tp_3D_SceneAppearance|extended_tip|CB_SHADING"
msgid "Applies Gouraud shading if marked, or flat shading if unmarked."
msgstr "이 항목을 선택하면 고우러드(Gouraud) 음영이 적용되고, 선택하지 않으면 플랫 음영이 적용됩니다."

#. SMFrD
#: chart2/uiconfig/ui/tp_3D_SceneAppearance.ui:98
msgctxt "tp_3D_SceneAppearance|CB_OBJECTLINES"
msgid "_Object borders"
msgstr "개체 테두리(_O)"

#. CQjGV
#: chart2/uiconfig/ui/tp_3D_SceneAppearance.ui:106
msgctxt "tp_3D_SceneAppearance|extended_tip|CB_OBJECTLINES"
msgid "Shows borders around the areas by setting the line style to Solid."
msgstr "선 스타일을 실선으로 설정하여 영역 주위에 테두리를 표시합니다."

#. CpWRj
#: chart2/uiconfig/ui/tp_3D_SceneAppearance.ui:118
msgctxt "tp_3D_SceneAppearance|CB_ROUNDEDEDGE"
msgid "_Rounded edges"
msgstr "둥근 모서리(_R)"

#. c5pNB
#: chart2/uiconfig/ui/tp_3D_SceneAppearance.ui:126
msgctxt "tp_3D_SceneAppearance|extended_tip|CB_ROUNDEDEDGE"
msgid "Edges are rounded by 5%."
msgstr "모서리가 5% 둥글림됩니다."

#. U5CTF
#: chart2/uiconfig/ui/tp_3D_SceneGeometry.ui:37
msgctxt "tp_3D_SceneGeometry|CBX_RIGHT_ANGLED_AXES"
msgid "_Right-angled axes"
msgstr "오른쪽 직각 축(_R)"

#. QxmLn
#: chart2/uiconfig/ui/tp_3D_SceneGeometry.ui:45
msgctxt "tp_3D_SceneGeometry|extended_tip|CBX_RIGHT_ANGLED_AXES"
msgid "If Right-angled axes is enabled, you can rotate the chart contents only in X and Y direction, that is, parallel to the chart borders. Right-angled axes is enabled by default for newly created 3D charts. Pie and Donut charts do not support right-angled axes."
msgstr "오른쪽으로 경사진 축을 사용하면, 차트 내용을 단지 X 및 Y 방향으로 회전시킬 수 있습니다. 즉, 차트 가장자리에 평행하게 됩니다. 오른쪽으로 경사진 축은 새 3D 차트를 만들 때 기본적으로 적용됩니다. 파이 차트와 도넛 차트는 오른쪽으로 경사진 축을 지원하지 않습니다."

#. y8Tyg
#: chart2/uiconfig/ui/tp_3D_SceneGeometry.ui:59
msgctxt "tp_3D_SceneGeometry|FT_X_ROTATION"
msgid "_X rotation"
msgstr "_X 축 회전"

#. TJ2Xp
#: chart2/uiconfig/ui/tp_3D_SceneGeometry.ui:73
msgctxt "tp_3D_SceneGeometry|FT_Y_ROTATION"
msgid "_Y rotation"
msgstr "_Y 축 회전"

#. UTAG5
#: chart2/uiconfig/ui/tp_3D_SceneGeometry.ui:87
msgctxt "tp_3D_SceneGeometry|FT_Z_ROTATION"
msgid "_Z rotation"
msgstr "_Z 축 회전"

#. ZC8ZQ
#: chart2/uiconfig/ui/tp_3D_SceneGeometry.ui:99
msgctxt "tp_3D_SceneGeometry|CBX_PERSPECTIVE"
msgid "_Perspective"
msgstr "원근(_P)"

#. xyePC
#: chart2/uiconfig/ui/tp_3D_SceneGeometry.ui:110
msgctxt "tp_3D_SceneGeometry|extended_tip|CBX_PERSPECTIVE"
msgid "Mark the Perspective box to view the chart as through a camera lens. Use the spin button to set the percentage. With a high percentage nearer objects look bigger than more distant objects."
msgstr "카메라 렌즈를 통해 보는 것과 같이 차트를 표시하려면 원근감 확인란을 선택합니다. 백분율을 설정하려면 스핀 버튼을 사용합니다. 백분율이 높으면 가까운 쪽 개체가 먼 쪽 개체보다 더 크게 보입니다."

#. mdPAi
#: chart2/uiconfig/ui/tp_3D_SceneGeometry.ui:131
msgctxt "tp_3D_SceneGeometry|MTR_FLD_PERSPECTIVE-atkobject"
msgid "Perspective"
msgstr "원근감"

#. JECHC
#: chart2/uiconfig/ui/tp_3D_SceneGeometry.ui:132
msgctxt "tp_3D_SceneGeometry|extended_tip|MTR_FLD_PERSPECTIVE"
msgid "Mark the Perspective box to view the chart as through a camera lens. Use the spin button to set the percentage. With a high percentage nearer objects look bigger than more distant objects."
msgstr "카메라 렌즈를 통해 보는 것과 같이 차트를 표시하려면 원근감 확인란을 선택합니다. 백분율을 설정하려면 스핀 버튼을 사용합니다. 백분율이 높으면 가까운 쪽 개체가 먼 쪽 개체보다 더 크게 보입니다."

#. PP8jT
#: chart2/uiconfig/ui/tp_3D_SceneGeometry.ui:150
msgctxt "tp_3D_SceneGeometry|extended_tip|MTR_FLD_Z_ROTATION"
msgid "Sets the rotation of the chart on the z axis. The preview responds to the new settings."
msgstr "Z 축 기준의 차트 회전을 설정합니다. 새 설정 내용은 미리보기에 바로 적용됩니다."

#. AyMWn
#: chart2/uiconfig/ui/tp_3D_SceneGeometry.ui:168
msgctxt "tp_3D_SceneGeometry|extended_tip|MTR_FLD_Y_ROTATION"
msgid "Sets the rotation of the chart on the y axis. The preview responds to the new settings."
msgstr "Y 축 기준의 차트 회전을 설정합니다. 새 설정 내용은 미리보기에 바로 적용됩니다."

#. EGS4B
#: chart2/uiconfig/ui/tp_3D_SceneGeometry.ui:186
msgctxt "tp_3D_SceneGeometry|extended_tip|MTR_FLD_X_ROTATION"
msgid "Sets the rotation of the chart on the x axis. The preview responds to the new settings."
msgstr "X 축 기준의 차트 회전을 설정합니다. 새 설정 내용은 미리보기에 바로 적용됩니다."

#. RGQDC
#: chart2/uiconfig/ui/tp_3D_SceneIllumination.ui:92
msgctxt "tp_3D_SceneIllumination|BTN_LIGHT_1|tooltip_text"
msgid "Light source 1"
msgstr "광원 1"

#. EQb5g
#: chart2/uiconfig/ui/tp_3D_SceneIllumination.ui:97
msgctxt "tp_3D_SceneIllumination|extended_tip|BTN_LIGHT_1"
msgid "Click to enable or disable the specular light source with highlights."
msgstr "하이라이트를 사용한 반사 광원을 활성화하거나 비활성화하려면 클릭합니다."

#. bwfDH
#: chart2/uiconfig/ui/tp_3D_SceneIllumination.ui:111
msgctxt "tp_3D_SceneIllumination|BTN_LIGHT_2|tooltip_text"
msgid "Light source 2"
msgstr "광원 2"

#. jkJM8
#: chart2/uiconfig/ui/tp_3D_SceneIllumination.ui:116
msgctxt "tp_3D_SceneIllumination|extended_tip|BTN_LIGHT_2"
msgid "Click to enable or disable the uniform light source."
msgstr "균등 광원을 활성화하거나 비활성화하려면 클릭합니다."

#. uMVDV
#: chart2/uiconfig/ui/tp_3D_SceneIllumination.ui:130
msgctxt "tp_3D_SceneIllumination|BTN_LIGHT_3|tooltip_text"
msgid "Light source 3"
msgstr "광원 3"

#. ZEUk7
#: chart2/uiconfig/ui/tp_3D_SceneIllumination.ui:135
msgctxt "tp_3D_SceneIllumination|extended_tip|BTN_LIGHT_3"
msgid "Click to enable or disable the uniform light source."
msgstr "균등 광원을 활성화하거나 비활성화하려면 클릭합니다."

#. 6CBDG
#: chart2/uiconfig/ui/tp_3D_SceneIllumination.ui:149
msgctxt "tp_3D_SceneIllumination|BTN_LIGHT_4|tooltip_text"
msgid "Light source 4"
msgstr "광원 4"

#. X5ZD3
#: chart2/uiconfig/ui/tp_3D_SceneIllumination.ui:154
msgctxt "tp_3D_SceneIllumination|extended_tip|BTN_LIGHT_4"
msgid "Click to enable or disable the uniform light source."
msgstr "균등 광원을 활성화하거나 비활성화하려면 클릭합니다."

#. Hf5Du
#: chart2/uiconfig/ui/tp_3D_SceneIllumination.ui:168
msgctxt "tp_3D_SceneIllumination|BTN_LIGHT_5|tooltip_text"
msgid "Light source 5"
msgstr "광원 5"

#. mUPX4
#: chart2/uiconfig/ui/tp_3D_SceneIllumination.ui:173
msgctxt "tp_3D_SceneIllumination|extended_tip|BTN_LIGHT_5"
msgid "Click to enable or disable the uniform light source."
msgstr "균등 광원을 활성화하거나 비활성화하려면 클릭합니다."

#. T7qDZ
#: chart2/uiconfig/ui/tp_3D_SceneIllumination.ui:187
msgctxt "tp_3D_SceneIllumination|BTN_LIGHT_6|tooltip_text"
msgid "Light source 6"
msgstr "광원 6"

#. AAkx2
#: chart2/uiconfig/ui/tp_3D_SceneIllumination.ui:192
msgctxt "tp_3D_SceneIllumination|extended_tip|BTN_LIGHT_6"
msgid "Click to enable or disable the uniform light source."
msgstr "균등 광원을 활성화하거나 비활성화하려면 클릭합니다."

#. mSsDD
#: chart2/uiconfig/ui/tp_3D_SceneIllumination.ui:206
msgctxt "tp_3D_SceneIllumination|BTN_LIGHT_7|tooltip_text"
msgid "Light source 7"
msgstr "광원 7"

#. Rh9Hz
#: chart2/uiconfig/ui/tp_3D_SceneIllumination.ui:211
msgctxt "tp_3D_SceneIllumination|extended_tip|BTN_LIGHT_7"
msgid "Click to enable or disable the uniform light source."
msgstr "균등 광원을 활성화하거나 비활성화하려면 클릭합니다."

#. wY5CR
#: chart2/uiconfig/ui/tp_3D_SceneIllumination.ui:225
msgctxt "tp_3D_SceneIllumination|BTN_LIGHT_8|tooltip_text"
msgid "Light source 8"
msgstr "광원 8"

#. EbsUA
#: chart2/uiconfig/ui/tp_3D_SceneIllumination.ui:230
msgctxt "tp_3D_SceneIllumination|extended_tip|BTN_LIGHT_8"
msgid "Click to enable or disable the uniform light source."
msgstr "균등 광원을 활성화하거나 비활성화하려면 클릭합니다."

#. DwEDc
#: chart2/uiconfig/ui/tp_3D_SceneIllumination.ui:264
msgctxt "tp_3D_SceneIllumination|extended_tip|LB_LIGHTSOURCE"
msgid "Select a color for the selected light source."
msgstr "선택한 광원의 색상을 선택합니다."

#. gfdAB
#: chart2/uiconfig/ui/tp_3D_SceneIllumination.ui:279
msgctxt "tp_3D_SceneIllumination|BTN_LIGHTSOURCE_COLOR|tooltip_text"
msgid "Select a color using the color dialog"
msgstr "색상 대화 상자를 사용하여 색상 선택"

#. JnBhP
#: chart2/uiconfig/ui/tp_3D_SceneIllumination.ui:283
msgctxt "tp_3D_SceneIllumination|extended_tip|BTN_LIGHTSOURCE_COLOR"
msgid "Select a color using the color dialog."
msgstr "색상 대화 상자를 사용하여 색상을 선택합니다."

#. mgXyK
#: chart2/uiconfig/ui/tp_3D_SceneIllumination.ui:306
msgctxt "tp_3D_SceneIllumination|FT_LIGHTSOURCE"
msgid "_Light Source"
msgstr ""

#. WssJA
#: chart2/uiconfig/ui/tp_3D_SceneIllumination.ui:348
msgctxt "tp_3D_SceneIllumination|extended_tip|LB_AMBIENTLIGHT"
msgid "Select a color for the ambient light."
msgstr "주변광의 색상을 선택합니다."

#. NpAu7
#: chart2/uiconfig/ui/tp_3D_SceneIllumination.ui:363
msgctxt "tp_3D_SceneIllumination|BTN_AMBIENT_COLOR|tooltip_text"
msgid "Select a color using the color dialog"
msgstr "색상 대화 상자를 사용하여 색상 선택"

#. 943Za
#: chart2/uiconfig/ui/tp_3D_SceneIllumination.ui:367
msgctxt "tp_3D_SceneIllumination|extended_tip|BTN_AMBIENT_COLOR"
msgid "Select a color using the color dialog."
msgstr "색상 대화 상자를 사용하여 색상을 선택합니다."

#. LFMGL
#: chart2/uiconfig/ui/tp_3D_SceneIllumination.ui:383
msgctxt "tp_3D_SceneIllumination|FT_AMBIENTLIGHT"
msgid "_Ambient Light"
msgstr ""

#. snUGf
#: chart2/uiconfig/ui/tp_3D_SceneIllumination.ui:427
msgctxt "tp_3D_SceneIllumination|CTL_LIGHT_PREVIEW|tooltip_text"
msgid "Light Preview"
msgstr "빛효과 미리보기"

#. tQBhd
#: chart2/uiconfig/ui/tp_3D_SceneIllumination.ui:485
msgctxt "tp_3D_SceneIllumination|extended_tip|tp_3D_SceneIllumination"
msgid "Set the light sources for the 3D view."
msgstr "3D 보기의 광원 설정"

#. XRVrG
#: chart2/uiconfig/ui/tp_AxisPositions.ui:44
msgctxt "tp_AxisPositions|FT_CROSSES_OTHER_AXIS_AT"
msgid "_Cross other axis at"
msgstr "다른 축과 교차(_C)"

#. Z734o
#: chart2/uiconfig/ui/tp_AxisPositions.ui:60
msgctxt "tp_AxisPositions|LB_CROSSES_OTHER_AXIS_AT"
msgid "Start"
msgstr "시작"

#. u6i7J
#: chart2/uiconfig/ui/tp_AxisPositions.ui:61
msgctxt "tp_AxisPositions|LB_CROSSES_OTHER_AXIS_AT"
msgid "End"
msgstr "끝"

#. vAUzq
#: chart2/uiconfig/ui/tp_AxisPositions.ui:62
msgctxt "tp_AxisPositions|LB_CROSSES_OTHER_AXIS_AT"
msgid "Value"
msgstr "값"

#. 5CSqT
#: chart2/uiconfig/ui/tp_AxisPositions.ui:63
msgctxt "tp_AxisPositions|LB_CROSSES_OTHER_AXIS_AT"
msgid "Category"
msgstr "범주"

#. eKYhk
#: chart2/uiconfig/ui/tp_AxisPositions.ui:67
msgctxt "tp_AxisPositions|extended_tip|LB_CROSSES_OTHER_AXIS_AT"
msgid "Select where to cross the other axis: at start, at end, at a specified value, or at a category."
msgstr "다른 축과 교차될 지점을 선택하십시오. 시작, 끝, 특정 값, 또는 분류"

#. FwCEp
#: chart2/uiconfig/ui/tp_AxisPositions.ui:86
msgctxt "tp_AxisPositions|extended_tip|EDT_CROSSES_OTHER_AXIS_AT"
msgid "Enter the value where the axis line should cross the other axis."
msgstr "다른 축과 교차될 축 선의 값을 입력하십시오."

#. AnLbY
#: chart2/uiconfig/ui/tp_AxisPositions.ui:110
msgctxt "tp_AxisPositions|extended_tip|EDT_CROSSES_OTHER_AXIS_AT_CATEGORY"
msgid "Select the category where the axis line should cross the other axis."
msgstr "다른 축과 교차될 축 선의 분류를 선택하십시오."

#. VYVhe
#: chart2/uiconfig/ui/tp_AxisPositions.ui:129
msgctxt "tp_AxisPositions|CB_AXIS_BETWEEN_CATEGORIES"
msgid "Axis _between categories"
msgstr "범주 사이의 축(_B)"

#. bW7T9
#: chart2/uiconfig/ui/tp_AxisPositions.ui:147
msgctxt "tp_AxisPositions|TXT_AXIS_LINE"
msgid "Axis Line"
msgstr "축 선"

#. 5ezBt
#: chart2/uiconfig/ui/tp_AxisPositions.ui:177
msgctxt "tp_AxisPositions|RB_ON"
msgid "_On tick marks"
msgstr "눈금에(_O)"

#. FaKJZ
#: chart2/uiconfig/ui/tp_AxisPositions.ui:186
msgctxt "tp_AxisPositions|extended_tip|RB_ON"
msgid "Specifies that the axis is positioned on the first/last tickmarks. This makes the data points visual representation begin/end at the value axis."
msgstr ""

#. gSFeZ
#: chart2/uiconfig/ui/tp_AxisPositions.ui:197
msgctxt "tp_AxisPositions|RB_BETWEEN"
msgid "_Between tick marks"
msgstr "눈금 사이에(_B)"

#. BSx2x
#: chart2/uiconfig/ui/tp_AxisPositions.ui:206
msgctxt "tp_AxisPositions|extended_tip|RB_BETWEEN"
msgid "Specifies that the axis is positioned between the tickmarks. This makes the data points visual representation begin/end at a distance from the value axis."
msgstr ""

#. ExBDm
#: chart2/uiconfig/ui/tp_AxisPositions.ui:221
msgctxt "tp_AxisPositions|TXT_POSITION"
msgid "Position Axis"
msgstr ""

#. 5AGbD
#: chart2/uiconfig/ui/tp_AxisPositions.ui:258
msgctxt "tp_AxisPositions|FT_PLACE_LABELS"
msgid "_Place labels"
msgstr "레이블 배치(_P)"

#. GDk2L
#: chart2/uiconfig/ui/tp_AxisPositions.ui:274
msgctxt "tp_AxisPositions|LB_PLACE_LABELS"
msgid "Near axis"
msgstr "축 가까이"

#. ZWQzB
#: chart2/uiconfig/ui/tp_AxisPositions.ui:275
msgctxt "tp_AxisPositions|LB_PLACE_LABELS"
msgid "Near axis (other side)"
msgstr "축 가까이(다른 쪽)"

#. j3GGm
#: chart2/uiconfig/ui/tp_AxisPositions.ui:276
msgctxt "tp_AxisPositions|LB_PLACE_LABELS"
msgid "Outside start"
msgstr "바깥쬭 시작"

#. mGDNr
#: chart2/uiconfig/ui/tp_AxisPositions.ui:277
msgctxt "tp_AxisPositions|LB_PLACE_LABELS"
msgid "Outside end"
msgstr "바깥쪽 끝"

#. ChAqv
#: chart2/uiconfig/ui/tp_AxisPositions.ui:281
msgctxt "tp_AxisPositions|extended_tip|LB_PLACE_LABELS"
msgid "Select where to place the labels: near axis, near axis (other side), outside start, or outside end."
msgstr "레이블을 표시할 위치를 선택하십시오. 축 가까이, 축 가까이(다른 쪽), 바깥쬭 시작, 또는 바깥쪽 끝"

#. DUNn4
#: chart2/uiconfig/ui/tp_AxisPositions.ui:306
msgctxt "tp_AxisPositions|FT_AXIS_LABEL_DISTANCE"
msgid "_Distance"
msgstr "거리(_D)"

#. Hkjze
#: chart2/uiconfig/ui/tp_AxisPositions.ui:343
msgctxt "tp_AxisPositions|TXT_FL_LABELS"
msgid "Labels"
msgstr "레이블"

#. YBk4g
#: chart2/uiconfig/ui/tp_AxisPositions.ui:382
msgctxt "tp_AxisPositions|FT_MAJOR"
msgid "Major:"
msgstr "주 축:"

#. G8MEU
#: chart2/uiconfig/ui/tp_AxisPositions.ui:398
msgctxt "tp_AxisPositions|FT_MINOR"
msgid "Minor:"
msgstr "보조 축:"

#. UN6Pr
#: chart2/uiconfig/ui/tp_AxisPositions.ui:412
msgctxt "tp_AxisPositions|CB_TICKS_INNER"
msgid "_Inner"
msgstr "안쪽(_I)"

#. DpVNk
#: chart2/uiconfig/ui/tp_AxisPositions.ui:423
msgctxt "tp_AxisPositions|extended_tip|CB_TICKS_INNER"
msgid "Specifies that marks are placed on the inner side of the axis."
msgstr "눈금을 축의 안쪽에 표시하도록 지정합니다."

#. EhLxm
#: chart2/uiconfig/ui/tp_AxisPositions.ui:434
msgctxt "tp_AxisPositions|CB_TICKS_OUTER"
msgid "_Outer"
msgstr "바깥쪽(_O)"

#. DGWEb
#: chart2/uiconfig/ui/tp_AxisPositions.ui:445
msgctxt "tp_AxisPositions|extended_tip|CB_TICKS_OUTER"
msgid "Specifies that marks are placed on the outer side of the axis."
msgstr "눈금을 축의 바깥쪽에 표시하도록 지정합니다."

#. RJXic
#: chart2/uiconfig/ui/tp_AxisPositions.ui:456
msgctxt "tp_AxisPositions|CB_MINOR_INNER"
msgid "I_nner"
msgstr "안쪽(_N)"

#. jbRx3
#: chart2/uiconfig/ui/tp_AxisPositions.ui:467
msgctxt "tp_AxisPositions|extended_tip|CB_MINOR_INNER"
msgid "Specifies that minor interval marks are placed on the inner side of the axis."
msgstr "보조 눈금을 축의 안쪽에 표시하도록 지정합니다."

#. nBCFJ
#: chart2/uiconfig/ui/tp_AxisPositions.ui:478
msgctxt "tp_AxisPositions|CB_MINOR_OUTER"
msgid "O_uter"
msgstr "바깥쪽(_U)"

#. JAi2f
#: chart2/uiconfig/ui/tp_AxisPositions.ui:489
msgctxt "tp_AxisPositions|extended_tip|CB_MINOR_OUTER"
msgid "Specifies that minor interval marks are placed on the outer side of the axis."
msgstr "보조 눈금을 축의 바깥쪽에 표시하도록 지정합니다."

#. XWuxR
#: chart2/uiconfig/ui/tp_AxisPositions.ui:514
msgctxt "tp_AxisPositions|FT_PLACE_TICKS"
msgid "Place _marks"
msgstr "표식 배치(_M)"

#. mvGBB
#: chart2/uiconfig/ui/tp_AxisPositions.ui:530
msgctxt "tp_AxisPositions|LB_PLACE_TICKS"
msgid "At labels"
msgstr "레이블"

#. dGAYz
#: chart2/uiconfig/ui/tp_AxisPositions.ui:531
msgctxt "tp_AxisPositions|LB_PLACE_TICKS"
msgid "At axis"
msgstr "축"

#. TJAJB
#: chart2/uiconfig/ui/tp_AxisPositions.ui:532
msgctxt "tp_AxisPositions|LB_PLACE_TICKS"
msgid "At axis and labels"
msgstr "축과 레이블"

#. tED2r
#: chart2/uiconfig/ui/tp_AxisPositions.ui:536
msgctxt "tp_AxisPositions|extended_tip|LB_PLACE_TICKS"
msgid "Select where to place the marks: at labels, at axis, or at axis and labels."
msgstr "표시할 곳을 선택하십시오. 레이블, 축, 축과 레이블"

#. jK9rf
#: chart2/uiconfig/ui/tp_AxisPositions.ui:559
msgctxt "tp_AxisPositions|TXT_FL_TICKS"
msgid "Interval Marks"
msgstr "간격 마크"

#. 4Jp7G
#: chart2/uiconfig/ui/tp_AxisPositions.ui:589
msgctxt "tp_AxisPositions|CB_MAJOR_GRID"
msgid "Show major _grid"
msgstr "주 격자 표시(_G)"

#. 7c2Hs
#: chart2/uiconfig/ui/tp_AxisPositions.ui:603
msgctxt "tp_AxisPositions|CB_MINOR_GRID"
msgid "_Show minor grid"
msgstr "보조 격자 표시(_S)"

#. Dp5Ar
#: chart2/uiconfig/ui/tp_AxisPositions.ui:617
msgctxt "tp_AxisPositions|PB_MAJOR_GRID"
msgid "Mo_re..."
msgstr "더 많이(_R)..."

#. k5VQQ
#: chart2/uiconfig/ui/tp_AxisPositions.ui:630
msgctxt "tp_AxisPositions|PB_MINOR_GRID"
msgid "Mor_e..."
msgstr "더 많이(_E)..."

#. 7eDLK
#: chart2/uiconfig/ui/tp_AxisPositions.ui:647
msgctxt "tp_AxisPositions|label2"
msgid "Grids"
msgstr "격자"

#. CUoe3
#: chart2/uiconfig/ui/tp_ChartType.ui:48
msgctxt "tp_ChartType|FT_CAPTION_FOR_WIZARD"
msgid "Choose a Chart Type"
msgstr "차트 유형 선택"

#. wBFXQ
#: chart2/uiconfig/ui/tp_ChartType.ui:94
msgctxt "tp_ChartType|extended_tip|subtype"
msgid "Select a sub type of the basic chart type."
msgstr "기본 차트 유형의 하위 유형을 선택합니다."

#. FSf6b
#: chart2/uiconfig/ui/tp_ChartType.ui:123
msgctxt "tp_ChartType|3dlook"
msgid "_3D Look"
msgstr "_3D 모양"

#. EB95g
#: chart2/uiconfig/ui/tp_ChartType.ui:133
msgctxt "tp_ChartType|extended_tip|3dlook"
msgid "Enables a 3D look for the data values."
msgstr "데이터 값을 3D 모양으로 나타냅니다."

#. FprGw
#: chart2/uiconfig/ui/tp_ChartType.ui:147
msgctxt "tp_ChartType|3dscheme"
msgid "Simple"
msgstr "단순"

#. pKhfX
#: chart2/uiconfig/ui/tp_ChartType.ui:148
msgctxt "tp_ChartType|3dscheme"
msgid "Realistic"
msgstr "사실적"

#. zZxWG
#: chart2/uiconfig/ui/tp_ChartType.ui:155
msgctxt "tp_ChartType|extended_tip|3dscheme"
msgid "Select the type of 3D look."
msgstr "3D 모양 유형을 선택합니다."

#. FxHfq
#: chart2/uiconfig/ui/tp_ChartType.ui:173
msgctxt "tp_ChartType|shapeft"
msgid "Sh_ape"
msgstr "모양(_A)"

#. CCA3V
#: chart2/uiconfig/ui/tp_ChartType.ui:216
msgctxt "tp_ChartType|extended_tip|shape"
msgid "Select a shape from the list."
msgstr "목록에서 도형을 선택합니다."

#. G2u4D
#: chart2/uiconfig/ui/tp_ChartType.ui:241
msgctxt "tp_ChartType|stack"
msgid "_Stack series"
msgstr "계열 누적(_S)"

#. h8wCq
#: chart2/uiconfig/ui/tp_ChartType.ui:248
msgctxt "tp_ChartType|extended_tip|stack"
msgid "Displays stacked series for Line charts."
msgstr "선 차트에 대한 연속 누적을 표시합니다."

#. KfD2L
#: chart2/uiconfig/ui/tp_ChartType.ui:266
msgctxt "tp_ChartType|ontop"
msgid "On top"
msgstr "위쪽"

#. DY854
#: chart2/uiconfig/ui/tp_ChartType.ui:274
msgctxt "tp_ChartType|extended_tip|ontop"
msgid "Stack series display values on top of each other."
msgstr "연속 누적에서는 값이 이전 값과 누적되어 표시됩니다."

#. C7JxK
#: chart2/uiconfig/ui/tp_ChartType.ui:285
msgctxt "tp_ChartType|percent"
msgid "Percent"
msgstr "백분율"

#. EVNAR
#: chart2/uiconfig/ui/tp_ChartType.ui:293
msgctxt "tp_ChartType|extended_tip|percent"
msgid "Stack series display values as percent."
msgstr "연속 누적에서는 값이 백분율로 표시됩니다."

#. ijuPy
#: chart2/uiconfig/ui/tp_ChartType.ui:304
msgctxt "tp_ChartType|deep"
msgid "Deep"
msgstr "깊이"

#. etF2p
#: chart2/uiconfig/ui/tp_ChartType.ui:331
msgctxt "tp_ChartType|linetypeft"
msgid "_Line type"
msgstr "선 유형(_L)"

#. RbyB4
#: chart2/uiconfig/ui/tp_ChartType.ui:345
msgctxt "tp_ChartType|linetype"
msgid "Straight"
msgstr "직선"

#. dG5tv
#: chart2/uiconfig/ui/tp_ChartType.ui:346
msgctxt "tp_ChartType|linetype"
msgid "Smooth"
msgstr "곡선"

#. uHHpu
#: chart2/uiconfig/ui/tp_ChartType.ui:347
msgctxt "tp_ChartType|linetype"
msgid "Stepped"
msgstr "계단형"

#. G3eDR
#: chart2/uiconfig/ui/tp_ChartType.ui:351
msgctxt "tp_ChartType|extended_tip|linetype"
msgid "Choose the type of line to draw."
msgstr "3D 모양 유형을 선택합니다."

#. JqNUv
#: chart2/uiconfig/ui/tp_ChartType.ui:362
msgctxt "tp_ChartType|properties"
msgid "Properties..."
msgstr "속성..."

#. EnymX
#: chart2/uiconfig/ui/tp_ChartType.ui:368
msgctxt "tp_ChartType|extended_tip|properties"
msgid "Opens a dialog to set the line or curve properties."
msgstr "대화 상자를 열어 선 속성이나 곡선 속성을 설정합니다."

#. KzGZQ
#: chart2/uiconfig/ui/tp_ChartType.ui:385
msgctxt "tp_ChartType|sort"
msgid "_Sort by X values"
msgstr "X 값으로 정렬(_S)"

#. tbgi3
#: chart2/uiconfig/ui/tp_ChartType.ui:392
msgctxt "tp_ChartType|extended_tip|sort"
msgid "Connects points by ascending X values, even if the order of values is different, in an XY scatter diagram."
msgstr "XY 분산형 다이어그램에서 값의 순서가 달라도 X 값을 오름차순으로 정렬하여 포인트를 연결합니다."

#. CmGat
#: chart2/uiconfig/ui/tp_ChartType.ui:411
msgctxt "tp_ChartType|nolinesft"
msgid "_Number of lines"
msgstr "줄 수(_N)"

#. bBgDJ
#: chart2/uiconfig/ui/tp_ChartType.ui:431
msgctxt "tp_ChartType|extended_tip|nolines"
msgid "Set the number of lines for the Column and Line chart type."
msgstr "열 및 선 차트 유형에서 선의 개수를 설정합니다."

#. M2sxB
#: chart2/uiconfig/ui/tp_ChartType.ui:499
msgctxt "tp_ChartType|extended_tip|charttype"
msgid "Select a basic chart type."
msgstr "기본 차트 유형을 선택합니다."

#. UGk4x
#: chart2/uiconfig/ui/tp_DataLabel.ui:39
msgctxt "tp_DataLabel|CB_VALUE_AS_NUMBER"
msgid "Value as _number"
msgstr ""

#. uGdoi
#: chart2/uiconfig/ui/tp_DataLabel.ui:47
msgctxt "tp_DataLabel|extended_tip|CB_VALUE_AS_NUMBER"
msgid "Displays the absolute values of the data points."
msgstr "데이터 요소의 절대값을 표시합니다."

#. QFsau
#: chart2/uiconfig/ui/tp_DataLabel.ui:58
msgctxt "tp_DataLabel|CB_VALUE_AS_PERCENTAGE"
msgid "Value as _percentage"
msgstr ""

#. FcaPo
#: chart2/uiconfig/ui/tp_DataLabel.ui:66
msgctxt "tp_DataLabel|extended_tip|CB_VALUE_AS_PERCENTAGE"
msgid "Displays the percentage of the data points in each column."
msgstr "데이터 요소의 백분율을 각 열에 표시합니다."

#. k4iPb
#: chart2/uiconfig/ui/tp_DataLabel.ui:77
msgctxt "tp_DataLabel|CB_CATEGORY"
msgid "_Category"
msgstr ""

#. EZXZX
#: chart2/uiconfig/ui/tp_DataLabel.ui:85
msgctxt "tp_DataLabel|extended_tip|CB_CATEGORY"
msgid "Shows the data point text labels."
msgstr "데이터 요소 텍스트 레이블을 표시합니다."

#. Y6NXz
#: chart2/uiconfig/ui/tp_DataLabel.ui:96
msgctxt "tp_DataLabel|CB_SYMBOL"
msgid "_Legend key"
msgstr ""

#. Bm8gp
#: chart2/uiconfig/ui/tp_DataLabel.ui:104
msgctxt "tp_DataLabel|extended_tip|CB_SYMBOL"
msgid "Displays the legend icons next to each data point label."
msgstr "범례 아이콘을 각 데이터 요소 레이블 옆에 표시합니다."

#. K3uFN
#: chart2/uiconfig/ui/tp_DataLabel.ui:115
msgctxt "tp_DataLabel|CB_WRAP_TEXT"
msgid "Auto text _wrap"
msgstr "자동 줄 바꿈(_W)"

#. tgNDD
#: chart2/uiconfig/ui/tp_DataLabel.ui:129
msgctxt "tp_DataLabel|PB_NUMBERFORMAT"
msgid "Number _format..."
msgstr "숫자 형식(_F)..."

#. nzq24
#: chart2/uiconfig/ui/tp_DataLabel.ui:137
msgctxt "tp_DataLabel|extended_tip|PB_NUMBERFORMAT"
msgid "Opens a dialog to select the number format."
msgstr "숫자 서식을 선택하기 위한 대화상자를 표시합니다."

#. PYC2b
#: chart2/uiconfig/ui/tp_DataLabel.ui:148
msgctxt "tp_DataLabel|PB_PERCENT_NUMBERFORMAT"
msgid "Percentage f_ormat..."
msgstr "백분율 형식(_O)..."

#. 3wD3x
#: chart2/uiconfig/ui/tp_DataLabel.ui:156
msgctxt "tp_DataLabel|extended_tip|PB_PERCENT_NUMBERFORMAT"
msgid "Opens a dialog to select the percentage format."
msgstr "퍼센트 서식을 선택하기 위한 대화상자를 엽니다."

#. gFELD
#: chart2/uiconfig/ui/tp_DataLabel.ui:169
msgctxt "tp_DataLabel|CT_LABEL_DIAL"
msgid "ABCD"
msgstr "ABCD"

#. PNGYD
#: chart2/uiconfig/ui/tp_DataLabel.ui:182
msgctxt "tp_DataLabel|STR_DLG_NUMBERFORMAT_FOR_PERCENTAGE_VALUE"
msgid "Number Format for Percentage Value"
msgstr "백분율 값에 대한 숫자 형식"

#. hxBUr
#: chart2/uiconfig/ui/tp_DataLabel.ui:191
msgctxt "tp_DataLabel|CB_DATA_SERIES_NAME"
msgid "_Series name"
msgstr ""

#. 3tWYv
#: chart2/uiconfig/ui/tp_DataLabel.ui:199
msgctxt "tp_DataLabel|extended_tip|CB_DATA_SERIES_NAME"
msgid "Shows the data series name in the label."
msgstr ""

#. 3BZrx
#: chart2/uiconfig/ui/tp_DataLabel.ui:220
msgctxt "tp_DataLabel|label1"
msgid "Text Attributes"
msgstr "텍스트 속성"

#. 2MNGz
#: chart2/uiconfig/ui/tp_DataLabel.ui:254
msgctxt "tp_DataLabel|FT_LABEL_PLACEMENT"
msgid "Place_ment"
msgstr "배치(_M)"

#. L2MYb
#: chart2/uiconfig/ui/tp_DataLabel.ui:270
msgctxt "tp_DataLabel|liststorePLACEMENT"
msgid "Best fit"
msgstr "자동 맞춤"

#. ba7eW
#: chart2/uiconfig/ui/tp_DataLabel.ui:271
msgctxt "tp_DataLabel|liststorePLACEMENT"
msgid "Center"
msgstr "중앙"

#. nW5vs
#: chart2/uiconfig/ui/tp_DataLabel.ui:272
msgctxt "tp_DataLabel|liststorePLACEMENT"
msgid "Above"
msgstr "위"

#. gW9Aa
#: chart2/uiconfig/ui/tp_DataLabel.ui:273
msgctxt "tp_DataLabel|liststorePLACEMENT"
msgid "Top left"
msgstr "왼쪽 위"

#. UQBcJ
#: chart2/uiconfig/ui/tp_DataLabel.ui:274
msgctxt "tp_DataLabel|liststorePLACEMENT"
msgid "Left"
msgstr "왼쪽"

#. CVw6x
#: chart2/uiconfig/ui/tp_DataLabel.ui:275
msgctxt "tp_DataLabel|liststorePLACEMENT"
msgid "Bottom left"
msgstr "왼쪽 아래"

#. EF7Qb
#: chart2/uiconfig/ui/tp_DataLabel.ui:276
msgctxt "tp_DataLabel|liststorePLACEMENT"
msgid "Below"
msgstr "아래"

#. bdAYf
#: chart2/uiconfig/ui/tp_DataLabel.ui:277
msgctxt "tp_DataLabel|liststorePLACEMENT"
msgid "Bottom right"
msgstr "오른쪽 아래"

#. kHGEs
#: chart2/uiconfig/ui/tp_DataLabel.ui:278
msgctxt "tp_DataLabel|liststorePLACEMENT"
msgid "Right"
msgstr "오른쪽"

#. GFkmP
#: chart2/uiconfig/ui/tp_DataLabel.ui:279
msgctxt "tp_DataLabel|liststorePLACEMENT"
msgid "Top right"
msgstr "오른쪽 위"

#. KFZhx
#: chart2/uiconfig/ui/tp_DataLabel.ui:280
msgctxt "tp_DataLabel|liststorePLACEMENT"
msgid "Inside"
msgstr "내부"

#. BJm6w
#: chart2/uiconfig/ui/tp_DataLabel.ui:281
msgctxt "tp_DataLabel|liststorePLACEMENT"
msgid "Outside"
msgstr "외부"

#. XGkMi
#: chart2/uiconfig/ui/tp_DataLabel.ui:282
msgctxt "tp_DataLabel|liststorePLACEMENT"
msgid "Near origin"
msgstr "원점 근처"

#. vq2Bf
#: chart2/uiconfig/ui/tp_DataLabel.ui:286
msgctxt "tp_DataLabel|extended_tip|LB_LABEL_PLACEMENT"
msgid "Selects the placement of data labels relative to the objects."
msgstr "데이터 레이블의 개체에 대한 상대적인 배치 위치를 선택합니다."

#. GqA8C
#: chart2/uiconfig/ui/tp_DataLabel.ui:299
msgctxt "tp_DataLabel|FT_TEXT_SEPARATOR"
msgid "_Separator"
msgstr "구분 기호(_S)"

#. oPhGH
#: chart2/uiconfig/ui/tp_DataLabel.ui:315
msgctxt "tp_DataLabel|liststoreSEPARATOR"
msgid "Space"
msgstr "공백"

#. fR4fG
#: chart2/uiconfig/ui/tp_DataLabel.ui:316
msgctxt "tp_DataLabel|liststoreSEPARATOR"
msgid "Comma"
msgstr "쉼표"

#. 5baF4
#: chart2/uiconfig/ui/tp_DataLabel.ui:317
msgctxt "tp_DataLabel|liststoreSEPARATOR"
msgid "Semicolon"
msgstr "세미콜론"

#. 8MGkQ
#: chart2/uiconfig/ui/tp_DataLabel.ui:318
msgctxt "tp_DataLabel|liststoreSEPARATOR"
msgid "New line"
msgstr "새 줄"

#. bpmiF
#: chart2/uiconfig/ui/tp_DataLabel.ui:319
msgctxt "tp_DataLabel|liststoreSEPARATOR"
msgid "Period"
msgstr "기간"

#. jjR8u
#: chart2/uiconfig/ui/tp_DataLabel.ui:323
msgctxt "tp_DataLabel|extended_tip|LB_TEXT_SEPARATOR"
msgid "Selects the separator between multiple text strings for the same object."
msgstr "같은 개체의 다중 문자열 사이를 구분할 구분자를 선택합니다."

#. mFEKm
#: chart2/uiconfig/ui/tp_DataLabel.ui:338
msgctxt "tp_DataLabel|label1"
msgid "Attribute Options"
msgstr ""

#. avLCL
#: chart2/uiconfig/ui/tp_DataLabel.ui:390
msgctxt "tp_DataLabel|extended_tip|CT_DIAL"
msgid "Click in the dial to set the text orientation for the data labels."
msgstr "데이터 레이블에 대한 텍스트 방향을 설정하려면 다이얼을 클릭합니다."

#. eKwUH
#: chart2/uiconfig/ui/tp_DataLabel.ui:411
msgctxt "tp_DataLabel|extended_tip|NF_LABEL_DEGREES"
msgid "Enter the counterclockwise rotation angle for the data labels."
msgstr "데이터 레이블의 반시계 방향 회전 각도를 입력하십시오."

#. VArif
#: chart2/uiconfig/ui/tp_DataLabel.ui:425
msgctxt "tp_DataLabel|FT_LABEL_DEGREES"
msgid "_Degrees"
msgstr "각도(_D)"

#. zdP7E
#: chart2/uiconfig/ui/tp_DataLabel.ui:450
msgctxt "tp_DataLabel|FT_LABEL_TEXTDIR"
msgid "Te_xt direction"
msgstr "텍스트 방향(_X)"

#. MYXZo
#: chart2/uiconfig/ui/tp_DataLabel.ui:467
msgctxt "tp_DataLabel|extended_tip|LB_LABEL_TEXTDIR"
msgid "Specify the text direction for a paragraph that uses complex text layout (CTL). This feature is only available if complex text layout support is enabled."
msgstr "복합 문자 언어(CTL)를 사용하는 단락의 텍스트 방향을 지정합니다. 이 기능은 복합 문자 언어 지원이 활성화되어 있는 경우에만 사용할 수 있습니다."

#. PKnKk
#: chart2/uiconfig/ui/tp_DataLabel.ui:490
msgctxt "tp_DataLabel|label2"
msgid "Rotate Text"
msgstr "텍스트 회전"

#. wBzcx
#: chart2/uiconfig/ui/tp_DataLabel.ui:519
msgctxt "tp_DataLabel|CB_CUSTOM_LEADER_LINES"
msgid "_Connect displaced data labels to data points"
msgstr ""

#. BXobT
#: chart2/uiconfig/ui/tp_DataLabel.ui:527
msgctxt "tp_DataLabel|extended_tip|CB_CUSTOM_LEADER_LINES"
msgid "Draws a line connecting the data labels to the data points"
msgstr ""

#. MBFBB
#: chart2/uiconfig/ui/tp_DataLabel.ui:543
msgctxt "tp_DataLabel|label3"
msgid "Leader Lines"
msgstr ""

#. iDheE
#: chart2/uiconfig/ui/tp_DataLabel.ui:573
msgctxt "tp_DataLabel|extended_tip|tp_DataLabel"
msgid "Opens the Data Labels dialog, which enables you to set the data labels."
msgstr "데이터 레이블을 설정할 수 있는 데이터 레이블 대화 상자를 엽니다."

#. rXE7B
#: chart2/uiconfig/ui/tp_DataPointOption.ui:37
msgctxt "tp_DataPointOption|CB_LEGEND_ENTRY_HIDDEN"
msgid "Hide legend entry"
msgstr "범례 항목 숨기기"

#. k2s9H
#: chart2/uiconfig/ui/tp_DataPointOption.ui:45
msgctxt "tp_DataPointOption|extended_tip|CB_LEGEND_ENTRY_HIDDEN"
msgid "Do not show legend entry for the selected data series or data point."
msgstr ""

#. DUQwA
#: chart2/uiconfig/ui/tp_DataPointOption.ui:61
msgctxt "tp_DataPointOption|label1"
msgid "Legend Entry"
msgstr "범례 항목"

#. A2dFx
#: chart2/uiconfig/ui/tp_DataSource.ui:18
msgctxt "tp_DataSource|imageIMB_RANGE_CAT|tooltip_text"
msgid "Select data range"
msgstr "데이터 범위 선택"

#. kEnRN
#: chart2/uiconfig/ui/tp_DataSource.ui:24
msgctxt "tp_DataSource|imageIMB_RANGE_MAIN|tooltip_text"
msgid "Select data range"
msgstr "데이터 범위 선택"

#. 2iNp6
#: chart2/uiconfig/ui/tp_DataSource.ui:73
msgctxt "tp_DataSource|FT_SERIES"
msgid "Data _series:"
msgstr "데이터 계열(_S):"

#. oFoeg
#: chart2/uiconfig/ui/tp_DataSource.ui:116
msgctxt "tp_DataSource|extended_tip|LB_SERIES"
msgid "Shows a list of all data series in the chart. Click an entry to view and edit that data series. Click Add to insert a new series into the list after the selected entry."
msgstr "차트 내 모든 데이터 계열의 목록을 표시합니다. 데이터 계열을 보고 편집하려면 해당 항목을 클릭합니다. 목록에서 선택한 항목 뒤에 새 데이터 계열을 삽입하려면 추가를 클릭합니다."

#. rqABh
#: chart2/uiconfig/ui/tp_DataSource.ui:137
msgctxt "tp_DataSource|BTN_ADD"
msgid "_Add"
msgstr "추가(_A)"

#. AExBB
#: chart2/uiconfig/ui/tp_DataSource.ui:145
msgctxt "tp_DataSource|extended_tip|BTN_ADD"
msgid "Adds a new entry below the current entry in the Data Series list. If an entry is selected, the new data series gets the same chart type."
msgstr "데이터 계열 목록에서 현재 항목 아래에 새 항목을 추가합니다. 항목을 선택한 경우 새 데이터 계열은 동일한 차트 유형을 가져옵니다."

#. dCyXA
#: chart2/uiconfig/ui/tp_DataSource.ui:163
msgctxt "tp_DataSource|BTN_UP-atkobject"
msgid "Up"
msgstr "위로"

#. GTEK3
#: chart2/uiconfig/ui/tp_DataSource.ui:164
msgctxt "tp_DataSource|extended_tip|BTN_UP"
msgid "Moves up the selected entry in the Data Series list."
msgstr "데이터 계열 목록에서 선택한 항목을 위로 이동합니다."

#. 3v9x2
#: chart2/uiconfig/ui/tp_DataSource.ui:175
msgctxt "tp_DataSource|BTN_REMOVE"
msgid "_Remove"
msgstr "제거(_R)"

#. BDDwm
#: chart2/uiconfig/ui/tp_DataSource.ui:183
msgctxt "tp_DataSource|extended_tip|BTN_REMOVE"
msgid "Removes the selected entry from the Data Series list."
msgstr "데이터 계열 목록에서 선택한 항목을 제거합니다."

#. MkZNf
#: chart2/uiconfig/ui/tp_DataSource.ui:201
msgctxt "tp_DataSource|BTN_DOWN-atkobject"
msgid "Down"
msgstr "아래로"

#. 558EK
#: chart2/uiconfig/ui/tp_DataSource.ui:202
msgctxt "tp_DataSource|extended_tip|BTN_DOWN"
msgid "Moves down the selected entry in the Data Series list."
msgstr "데이터 계열 목록에서 선택한 항목을 아래로 이동합니다."

#. mC5Ge
#: chart2/uiconfig/ui/tp_DataSource.ui:244
msgctxt "tp_DataSource|FT_ROLE"
msgid "_Data ranges:"
msgstr "데이터 범위(_D):"

#. ZB6Dv
#: chart2/uiconfig/ui/tp_DataSource.ui:297
msgctxt "tp_DataSource|extended_tip|LB_ROLE"
msgid "Shows all the data ranges used by the data series that is selected in the Data Series list box. Each data range shows the role name and the source range address."
msgstr "데이터 계열 목록 상자에서 선택한 데이터 계열이 사용하는 데이터 범위를 모두 표시합니다. 각 데이터 범위는 역할 이름 및 원본 범위 주소를 나타냅니다."

#. qRMfs
#: chart2/uiconfig/ui/tp_DataSource.ui:312
msgctxt "tp_DataSource|FT_RANGE"
msgid "Ran_ge for %VALUETYPE"
msgstr "%VALUETYPE 범위(_G)"

#. M2BSw
#: chart2/uiconfig/ui/tp_DataSource.ui:338
msgctxt "tp_DataSource|extended_tip|EDT_RANGE"
msgid "Shows the source range address from the second column of the Data Range list box. You can change the range in the text box or by dragging in the document. To minimize this dialog while you select the data range in Calc, click the Select data range button."
msgstr "데이터 범위 목록 상자 내 두 번째 열의 원본 범위 주소를 표시합니다. 텍스트 상자에서 텍스트를 수정하거나 문서에서 마우스로 끌어 범위를 변경할 수 있습니다. 이 대화 상자를 최소화한 상태로 Calc에서 데이터 범위를 선택하려면 데이터 범위 선택 버튼을 클릭합니다."

#. CwKet
#: chart2/uiconfig/ui/tp_DataSource.ui:356
msgctxt "tp_DataSource|extended_tip|IMB_RANGE_MAIN"
msgid "Shows the source range address from the second column of the Data Range list box. You can change the range in the text box or by dragging in the document. To minimize this dialog while you select the data range in Calc, click the Select data range button."
msgstr "데이터 범위 목록 상자 내 두 번째 열의 원본 범위 주소를 표시합니다. 텍스트 상자에서 텍스트를 수정하거나 문서에서 마우스로 끌어 범위를 변경할 수 있습니다. 이 대화 상자를 최소화한 상태로 Calc에서 데이터 범위를 선택하려면 데이터 범위 선택 버튼을 클릭합니다."

#. FX2CF
#: chart2/uiconfig/ui/tp_DataSource.ui:381
msgctxt "tp_DataSource|FT_CATEGORIES"
msgid "_Categories"
msgstr "범주(_C)"

#. EiwXn
#: chart2/uiconfig/ui/tp_DataSource.ui:395
msgctxt "tp_DataSource|FT_DATALABELS"
msgid "Data _labels"
msgstr "데이터 레이블(_L)"

#. ogTbE
#: chart2/uiconfig/ui/tp_DataSource.ui:426
msgctxt "tp_DataSource|extended_tip|EDT_CATEGORIES"
msgid "Shows the source range address of the categories (the texts you can see on the x-axis of a category chart). For an XY-chart, the text box contains the source range of the data labels which are displayed for the data points. To minimize this dialog while you select the data range in Calc, click the Select data range button."
msgstr "범주(범주 차트의 X 축에서 볼 수 있는 텍스트)의 원본 범위 주소를 표시합니다. XY 차트의 경우에는 텍스트 상자에 데이터 요소에 대한 데이터 레이블의 원본 범위가 포함됩니다. 이 대화 상자를 최소화한 상태로 Calc에서 데이터 범위를 선택하려면 데이터 범위 선택 버튼을 클릭합니다."

#. EYFEo
#: chart2/uiconfig/ui/tp_DataSource.ui:444
msgctxt "tp_DataSource|extended_tip|IMB_RANGE_CAT"
msgid "Shows the source range address of the categories (the texts you can see on the x-axis of a category chart). For an XY-chart, the text box contains the source range of the data labels which are displayed for the data points. To minimize this dialog while you select the data range in Calc, click the Select data range button."
msgstr "범주(범주 차트의 X 축에서 볼 수 있는 텍스트)의 원본 범위 주소를 표시합니다. XY 차트의 경우에는 텍스트 상자에 데이터 요소에 대한 데이터 레이블의 원본 범위가 포함됩니다. 이 대화 상자를 최소화한 상태로 Calc에서 데이터 범위를 선택하려면 데이터 범위 선택 버튼을 클릭합니다."

#. YwALA
#: chart2/uiconfig/ui/tp_DataSource.ui:481
msgctxt "tp_DataSource|FT_CAPTION_FOR_WIZARD"
msgid "Customize Data Ranges for Individual Data Series"
msgstr "각 데이터 계열에 대한 데이터 범위 지정"

#. tGqhN
#: chart2/uiconfig/ui/tp_ErrorBars.ui:53
msgctxt "tp_ErrorBars|RB_NONE"
msgid "_None"
msgstr "없음(_N)"

#. YVhm9
#: chart2/uiconfig/ui/tp_ErrorBars.ui:64
msgctxt "tp_ErrorBars|extended_tip|RB_NONE"
msgid "Does not show any error bars."
msgstr "오차 막대를 표시하지 않습니다."

#. Cq44D
#: chart2/uiconfig/ui/tp_ErrorBars.ui:76
msgctxt "tp_ErrorBars|RB_CONST"
msgid "_Constant Value"
msgstr "상수 값(_C)"

#. Aetuh
#: chart2/uiconfig/ui/tp_ErrorBars.ui:87
msgctxt "tp_ErrorBars|extended_tip|RB_CONST"
msgid "Displays constant values that you specify in the Parameters area."
msgstr "매개 변수 영역에서 지정한 상수값을 표시합니다."

#. Njqok
#: chart2/uiconfig/ui/tp_ErrorBars.ui:99
msgctxt "tp_ErrorBars|RB_PERCENT"
msgid "_Percentage"
msgstr "퍼센트(_P)"

#. kqgrm
#: chart2/uiconfig/ui/tp_ErrorBars.ui:110
msgctxt "tp_ErrorBars|extended_tip|RB_PERCENT"
msgid "Displays a percentage. The display refers to the corresponding data point. Set the percentage in the Parameters area."
msgstr "백분율을 표시합니다. 표시 내용은 해당 데이터 요소를 나타냅니다. 매개 변수의 형식은 백분율입니다."

#. qCQY8
#: chart2/uiconfig/ui/tp_ErrorBars.ui:137
msgctxt "tp_ErrorBars|extended_tip|RB_FUNCTION"
msgid "Select a function to calculate the error bars."
msgstr "오차 막대를 계산할 함수를 선택합니다."

#. GnXao
#: chart2/uiconfig/ui/tp_ErrorBars.ui:152
msgctxt "tp_ErrorBars|liststoreFUNCTION"
msgid "Standard Error"
msgstr "표준 오류"

#. SQ3rE
#: chart2/uiconfig/ui/tp_ErrorBars.ui:153
msgctxt "tp_ErrorBars|liststoreFUNCTION"
msgid "Standard Deviation"
msgstr "표준 편차"

#. GagXt
#: chart2/uiconfig/ui/tp_ErrorBars.ui:154
msgctxt "tp_ErrorBars|liststoreFUNCTION"
msgid "Variance"
msgstr "분산"

#. Siyxd
#: chart2/uiconfig/ui/tp_ErrorBars.ui:155
msgctxt "tp_ErrorBars|liststoreFUNCTION"
msgid "Error Margin"
msgstr "오차 한계"

#. j6oTg
#: chart2/uiconfig/ui/tp_ErrorBars.ui:159
msgctxt "tp_ErrorBars|extended_tip|LB_FUNCTION"
msgid "Select a function to calculate the error bars."
msgstr "오차 막대를 계산할 함수를 선택합니다."

#. AbhAQ
#: chart2/uiconfig/ui/tp_ErrorBars.ui:178
msgctxt "tp_ErrorBars|RB_RANGE"
msgid "Cell _Range"
msgstr "셀 범위(_R)"

#. x3uW3
#: chart2/uiconfig/ui/tp_ErrorBars.ui:189
msgctxt "tp_ErrorBars|extended_tip|RB_RANGE"
msgid "Click Cell Range and then specify a cell range from which to take the positive and negative error bar values."
msgstr "셀 범위를 클릭하고 양수 및 음수 오차 막대 값을 가져올 셀 범위를 지정합니다."

#. 9Y8Vo
#: chart2/uiconfig/ui/tp_ErrorBars.ui:205
msgctxt "tp_ErrorBars|label1"
msgid "Error Category"
msgstr "오류 범주"

#. q8qXd
#: chart2/uiconfig/ui/tp_ErrorBars.ui:236
msgctxt "tp_ErrorBars|RB_BOTH"
msgid "Positive _and Negative"
msgstr "양수 및 음수(_A)"

#. LDszs
#: chart2/uiconfig/ui/tp_ErrorBars.ui:247
msgctxt "tp_ErrorBars|extended_tip|RB_BOTH"
msgid "Shows positive and negative error bars."
msgstr "양수 및 음수 오차 막대 표시"

#. 6F78D
#: chart2/uiconfig/ui/tp_ErrorBars.ui:258
msgctxt "tp_ErrorBars|RB_POSITIVE"
msgid "Pos_itive"
msgstr "양수(_I)"

#. oSnnp
#: chart2/uiconfig/ui/tp_ErrorBars.ui:269
msgctxt "tp_ErrorBars|extended_tip|RB_POSITIVE"
msgid "Shows only positive error bars."
msgstr "양수 오차 막대만 표시"

#. jdFbj
#: chart2/uiconfig/ui/tp_ErrorBars.ui:280
msgctxt "tp_ErrorBars|RB_NEGATIVE"
msgid "Ne_gative"
msgstr "음수(_G)"

#. DvqJN
#: chart2/uiconfig/ui/tp_ErrorBars.ui:291
msgctxt "tp_ErrorBars|extended_tip|RB_NEGATIVE"
msgid "Shows only negative error bars."
msgstr "음수 오차 막대만 표시"

#. D4Aou
#: chart2/uiconfig/ui/tp_ErrorBars.ui:339
msgctxt "tp_ErrorBars|label2"
msgid "Error Indicator"
msgstr "오류 표시기"

#. haTNd
#: chart2/uiconfig/ui/tp_ErrorBars.ui:383
msgctxt "tp_ErrorBars|FT_POSITIVE"
msgid "P_ositive (+)"
msgstr "양수(_O) (+)"

#. 7bDeP
#: chart2/uiconfig/ui/tp_ErrorBars.ui:402
msgctxt "tp_ErrorBars|extended_tip|MF_POSITIVE"
msgid "Enter the value to add to the displayed value as the positive error value."
msgstr "양수 오류값으로 표시할 값으로 추가할 값을 입력하십시오."

#. D5XCD
#: chart2/uiconfig/ui/tp_ErrorBars.ui:421
msgctxt "tp_ErrorBars|extended_tip|ED_RANGE_POSITIVE"
msgid "Enter the address range from where to get the positive error values. Use the Shrink button to select the range from a sheet."
msgstr "양수 오류값을 가져올 주소 범위를 입력하십시오. 축소 버튼을 이용해 시트에서 범위를 선택합니다."

#. rGBRC
#: chart2/uiconfig/ui/tp_ErrorBars.ui:436
msgctxt "tp_ErrorBars|IB_RANGE_POSITIVE|tooltip_text"
msgid "Select data range"
msgstr "데이터 범위 선택"

#. QYRko
#: chart2/uiconfig/ui/tp_ErrorBars.ui:441
msgctxt "tp_ErrorBars|extended_tip|IB_RANGE_POSITIVE"
msgid "Click a button to shrink the dialog, then use the mouse to select the cell range in the spreadsheet. Click the button again to restore the dialog to full size."
msgstr "버튼을 클릭하여 대화상자를 줄이고, 스프레드시트에서 셀 범위를 선택합니다. 그리고 전체 크기 버튼을 눌러 대화 상자를 복구시킵니다."

#. C5ZdQ
#: chart2/uiconfig/ui/tp_ErrorBars.ui:467
msgctxt "tp_ErrorBars|FT_NEGATIVE"
msgid "_Negative (-)"
msgstr "음수(_N) (-)"

#. TAAD2
#: chart2/uiconfig/ui/tp_ErrorBars.ui:486
msgctxt "tp_ErrorBars|extended_tip|MF_NEGATIVE"
msgid "Enter the value to subtract from the displayed value as the negative error value."
msgstr "음수 오류값으로 표시될 값에서 삭제할 값을 입력하십시오."

#. S8d3Y
#: chart2/uiconfig/ui/tp_ErrorBars.ui:504
msgctxt "tp_ErrorBars|extended_tip|ED_RANGE_NEGATIVE"
msgid "Enter the address range from where to get the negative error values. Use the Shrink button to select the range from a sheet."
msgstr "음수 오류값을 가져올 주소 범위를 입력하십시오. 축소 버튼을 이용해 시트에서 범위를 선택합니다."

#. EVG7h
#: chart2/uiconfig/ui/tp_ErrorBars.ui:519
msgctxt "tp_ErrorBars|IB_RANGE_NEGATIVE|tooltip_text"
msgid "Select data range"
msgstr "데이터 범위 선택"

#. oEACZ
#: chart2/uiconfig/ui/tp_ErrorBars.ui:524
msgctxt "tp_ErrorBars|extended_tip|IB_RANGE_NEGATIVE"
msgid "Click a button to shrink the dialog, then use the mouse to select the cell range in the spreadsheet. Click the button again to restore the dialog to full size."
msgstr "버튼을 클릭하여 대화상자를 줄이고, 스프레드시트에서 셀 범위를 선택합니다. 그리고 전체 크기 버튼을 눌러 대화 상자를 복구시킵니다."

#. wdsax
#: chart2/uiconfig/ui/tp_ErrorBars.ui:543
msgctxt "tp_ErrorBars|CB_SYN_POS_NEG"
msgid "Same value for both"
msgstr "양쪽에 같은 값"

#. DvgLw
#: chart2/uiconfig/ui/tp_ErrorBars.ui:551
msgctxt "tp_ErrorBars|extended_tip|CB_SYN_POS_NEG"
msgid "Enable to use the positive error values also as negative error values. You can only change the value of the \"Positive (+)\" box. That value gets copied to the \"Negative (-)\" box automatically."
msgstr "양수 오차값을 음수 오차값으로 사용합니다. \"양수(+)\" 상자의 값만 변경할 수 있으며, 입력한 값은 \"음수(-)\" 상자로 자동 복사됩니다."

#. BEj3C
#: chart2/uiconfig/ui/tp_ErrorBars.ui:567
msgctxt "tp_ErrorBars|label3"
msgid "Parameters"
msgstr "매개 변수"

#. XxRKD
#: chart2/uiconfig/ui/tp_ErrorBars.ui:584
msgctxt "tp_ErrorBars|STR_DATA_SELECT_RANGE_FOR_POSITIVE_ERRORBARS"
msgid "Select Range for Positive Error Bars"
msgstr "정오차 막대 범위 선택"

#. FXjsk
#: chart2/uiconfig/ui/tp_ErrorBars.ui:595
msgctxt "tp_ErrorBars|STR_DATA_SELECT_RANGE_FOR_NEGATIVE_ERRORBARS"
msgid "Select Range for Negative Error Bars"
msgstr "부오차 막대 범위 선택"

#. AAfgS
#: chart2/uiconfig/ui/tp_ErrorBars.ui:606
msgctxt "tp_ErrorBars|STR_CONTROLTEXT_ERROR_BARS_FROM_DATA"
msgid "From Data Table"
msgstr "데이터 표에서"

#. C9QvS
#: chart2/uiconfig/ui/tp_LegendPosition.ui:27
msgctxt "tp_LegendPosition|left"
msgid "_Left"
msgstr "왼쪽 맞춤(_L)"

#. 98N4N
#: chart2/uiconfig/ui/tp_LegendPosition.ui:36
msgctxt "tp_LegendPosition|extended_tip|left"
msgid "Positions the legend at the left of the chart."
msgstr "범례를 차트 왼쪽에 배치합니다."

#. WGGa8
#: chart2/uiconfig/ui/tp_LegendPosition.ui:47
msgctxt "tp_LegendPosition|right"
msgid "_Right"
msgstr "오른쪽(_R)"

#. BgNsc
#: chart2/uiconfig/ui/tp_LegendPosition.ui:56
msgctxt "tp_LegendPosition|extended_tip|right"
msgid "Positions the legend at the right of the chart."
msgstr "범례를 차트 오른쪽에 배치합니다."

#. aURZs
#: chart2/uiconfig/ui/tp_LegendPosition.ui:67
msgctxt "tp_LegendPosition|top"
msgid "_Top"
msgstr "위쪽(_T)"

#. GppCU
#: chart2/uiconfig/ui/tp_LegendPosition.ui:76
msgctxt "tp_LegendPosition|extended_tip|top"
msgid "Positions the legend at the top of the chart."
msgstr "범례를 차트 맨 위에 배치합니다."

#. 9WgFV
#: chart2/uiconfig/ui/tp_LegendPosition.ui:87
msgctxt "tp_LegendPosition|bottom"
msgid "_Bottom"
msgstr "아래쪽(_B)"

#. dvBdX
#: chart2/uiconfig/ui/tp_LegendPosition.ui:96
msgctxt "tp_LegendPosition|extended_tip|bottom"
msgid "Positions the legend at the bottom of the chart."
msgstr "범례를 차트 맨 아래에 배치합니다."

#. z84pQ
#: chart2/uiconfig/ui/tp_LegendPosition.ui:111
msgctxt "tp_LegendPosition|TXT_POSITION"
msgid "Position"
msgstr "위치"

#. 6teoB
#: chart2/uiconfig/ui/tp_LegendPosition.ui:142
msgctxt "tp_LegendPosition|FT_LEGEND_TEXTDIR"
msgid "Te_xt direction"
msgstr "텍스트 방향(_X)"

#. PSPoQ
#: chart2/uiconfig/ui/tp_LegendPosition.ui:158
msgctxt "tp_LegendPosition|extended_tip|LB_LEGEND_TEXTDIR"
msgid "Specify the text direction for a paragraph that uses complex text layout (CTL). This feature is only available if complex text layout support is enabled."
msgstr "복합 문자 언어(CTL)를 사용하는 단락의 텍스트 방향을 지정합니다. 이 기능은 복합 문자 언어 지원이 활성화되어 있는 경우에만 사용할 수 있습니다."

#. sUDkC
#: chart2/uiconfig/ui/tp_LegendPosition.ui:174
msgctxt "tp_LegendPosition|TXT_ORIENTATION"
msgid "Text Orientation"
msgstr "인쇄 방향"

#. VsH8A
#: chart2/uiconfig/ui/tp_LegendPosition.ui:203
msgctxt "tp_LegendPosition|CB_NO_OVERLAY"
msgid "Show the legend without overlapping the chart"
msgstr ""

#. yi8AX
#: chart2/uiconfig/ui/tp_LegendPosition.ui:211
msgctxt "tp_LegendPosition|extended_tip|CB_NO_OVERLAY"
msgid "Specifies whether the legend should overlap the chart."
msgstr ""

#. 82yue
#: chart2/uiconfig/ui/tp_LegendPosition.ui:227
msgctxt "tp_LegendPosition|TXT_OVERLAY"
msgid "Overlay"
msgstr "오버레이"

#. 8783D
#: chart2/uiconfig/ui/tp_PolarOptions.ui:24
msgctxt "tp_PolarOptions|CB_CLOCKWISE"
msgid "_Clockwise direction"
msgstr "시계 방향(_C)"

#. GikR7
#: chart2/uiconfig/ui/tp_PolarOptions.ui:34
msgctxt "tp_PolarOptions|extended_tip|CB_CLOCKWISE"
msgid "The default direction in which the pieces of a pie chart are ordered is counterclockwise. Enable the Clockwise direction checkbox to draw the pieces in opposite direction."
msgstr "원형 차트의 기본 설정에서는 요소들이 시계반대방향으로 배열됩니다. 시계방향으로 정렬하시려면 시계방향 체크박스를 활성화시켜 주세요."

#. ATHCu
#: chart2/uiconfig/ui/tp_PolarOptions.ui:43
msgctxt "tp_PolarOptions|label1"
msgid "Orientation"
msgstr "방향 설정"

#. mEJCE
#: chart2/uiconfig/ui/tp_PolarOptions.ui:79
msgctxt "tp_PolarOptions|extended_tip|CT_ANGLE_DIAL"
msgid "Drag the small dot along the circle or click any position on the circle to set the starting angle of a pie or donut chart. The starting angle is the mathematical angle position where the first piece is drawn. The value of 90 degrees draws the first piece at the 12 o'clock position. A value of 0 degrees starts at the 3 o'clock position."
msgstr "작은 점을 원 둘레에서 드래그하거나 원하는 위치를 클릭해서 원형이나 도넛형 차트의 초기각을 지정해 주세요. 초기각은 차트에서 첫번째 요소가 시작하는 지점의 상대적인 각도를 말합니다. 초기각이 90도일 때 첫번째 요소는 12시 지점에서 시작하며, 0도일 때는 3시 지점에서 시작하게 됩니다."

#. EEVTg
#: chart2/uiconfig/ui/tp_PolarOptions.ui:99
msgctxt "tp_PolarOptions|extended_tip|NF_STARTING_ANGLE"
msgid "Enter the starting angle between 0 and 359 degrees. You can also click the arrows to change the displayed value."
msgstr "초기각의 값을 0과 359도 사이에서 입력하세요. 화살표를 클릭해서 값을 조절할 수도 있습니다."

#. prqEa
#: chart2/uiconfig/ui/tp_PolarOptions.ui:113
msgctxt "tp_PolarOptions|FT_ROTATION_DEGREES"
msgid "_Degrees"
msgstr "각도(_D)"

#. iHLKn
#: chart2/uiconfig/ui/tp_PolarOptions.ui:130
msgctxt "tp_PolarOptions|label2"
msgid "Starting Angle"
msgstr "시작 각도"

#. 5zEew
#: chart2/uiconfig/ui/tp_PolarOptions.ui:152
msgctxt "tp_PolarOptions|CB_INCLUDE_HIDDEN_CELLS_POLAR"
msgid "Include _values from hidden cells"
msgstr "숨겨진 셀의 값 포함(_V)"

#. F5FTp
#: chart2/uiconfig/ui/tp_PolarOptions.ui:166
msgctxt "tp_PolarOptions|label3"
msgid "Plot Options"
msgstr "플롯 선택 사항"

#. tHATu
#: chart2/uiconfig/ui/tp_RangeChooser.ui:8
msgctxt "tp_RangeChooser|imageIB_RANGE|tooltip_text"
msgid "Select data range"
msgstr "데이터 범위 선택"

#. 4zh42
#: chart2/uiconfig/ui/tp_RangeChooser.ui:28
msgctxt "tp_RangeChooser|FT_CAPTION_FOR_WIZARD"
msgid "Choose a Data Range"
msgstr "데이터 범위 선택"

#. g2XVd
#: chart2/uiconfig/ui/tp_RangeChooser.ui:50
msgctxt "tp_RangeChooser|FT_RANGE"
msgid "_Data range:"
msgstr "데이터 범위(_D):"

#. WKLi7
#: chart2/uiconfig/ui/tp_RangeChooser.ui:69
msgctxt "tp_RangeChooser|extended_tip|ED_RANGE"
msgid "Enter the data range that you want to include in your chart. To minimize this dialog while you select the data range in Calc, click the Select data range button."
msgstr "차트에 포함할 데이터 범위를 입력합니다. 이 대화 상자를 최소화한 상태로 Calc에서 데이터 범위를 선택하려면 데이터 범위 선택 버튼을 클릭합니다."

#. FyVoD
#: chart2/uiconfig/ui/tp_RangeChooser.ui:83
msgctxt "tp_RangeChooser|IB_RANGE|tooltip_text"
msgid "Select data range"
msgstr "데이터 범위 선택"

#. FVivY
#: chart2/uiconfig/ui/tp_RangeChooser.ui:88
msgctxt "tp_RangeChooser|extended_tip|IB_RANGE"
msgid "Enter the data range that you want to include in your chart. To minimize this dialog while you select the data range in Calc, click the Select data range button."
msgstr "차트에 포함할 데이터 범위를 입력합니다. 이 대화 상자를 최소화한 상태로 Calc에서 데이터 범위를 선택하려면 데이터 범위 선택 버튼을 클릭합니다."

#. RGGHE
#: chart2/uiconfig/ui/tp_RangeChooser.ui:105
msgctxt "tp_RangeChooser|RB_DATAROWS"
msgid "Data series in _rows"
msgstr "행의 데이터 계열(_R)"

#. w6DuB
#: chart2/uiconfig/ui/tp_RangeChooser.ui:114
msgctxt "tp_RangeChooser|extended_tip|RB_DATAROWS"
msgid "Data series get their data from consecutive rows in the selected range. For scatter charts, the first data series will contain x-values for all series. All other data series are used as y-values, one for each series."
msgstr "데이터 계열은 선택한 범위 내 연속되는 행에서 해당 데이터를 가져옵니다. 분산형 차트의 경우 첫 번째 데이터 계열에 모든 계열의 x 값이 포함됩니다. 다른 모든 데이터 계열은 각 계열에 대해 하나씩 y 값으로 사용됩니다."

#. wSDqF
#: chart2/uiconfig/ui/tp_RangeChooser.ui:125
msgctxt "tp_RangeChooser|RB_DATACOLS"
msgid "Data series in _columns"
msgstr "열의 데이터 계열(_C)"

#. RfFZF
#: chart2/uiconfig/ui/tp_RangeChooser.ui:134
msgctxt "tp_RangeChooser|extended_tip|RB_DATACOLS"
msgid "Data series get their data from consecutive columns in the selected range. For scatter charts, the first data column will contain x-values for all series. All other data columns are used as y-values, one for each series."
msgstr "데이터 계열은 선택한 범위 내 연속되는 열에서 해당 데이터를 가져옵니다. 분산형 차트의 경우 첫 번째 데이터 열에 모든 계열의 x 값이 포함됩니다. 다른 모든 데이터 열은 각 계열에 대해 하나씩 y 값으로 사용됩니다."

#. CExLY
#: chart2/uiconfig/ui/tp_RangeChooser.ui:145
msgctxt "tp_RangeChooser|CB_FIRST_ROW_ASLABELS"
msgid "_First row as label"
msgstr "첫 행을 제목으로(_F)"

#. HviBv
#: chart2/uiconfig/ui/tp_RangeChooser.ui:153
msgctxt "tp_RangeChooser|extended_tip|CB_FIRST_ROW_ASLABELS"
msgid "For data series in columns: The first row in the range is used as names for data series. For data series in rows: The first row in the range is used as categories. The remaining rows comprise the data series. If this check box is not selected, all rows are data series."
msgstr "열 기준 데이터 계열의 경우 범위 내 첫 행은 데이터 계열의 이름으로 사용됩니다. 행 기준 데이터 계열의 경우 범위 내 첫 행은 범주로 사용됩니다. 나머지 행은 데이터 계열로 구성됩니다. 이 확인란을 선택하지 않으면 모든 행이 데이터 계열로 간주됩니다."

#. ER2D7
#: chart2/uiconfig/ui/tp_RangeChooser.ui:164
msgctxt "tp_RangeChooser|CB_FIRST_COLUMN_ASLABELS"
msgid "F_irst column as label"
msgstr "첫 열을 제목으로(_I)"

#. tTAhH
#: chart2/uiconfig/ui/tp_RangeChooser.ui:172
msgctxt "tp_RangeChooser|extended_tip|CB_FIRST_COLUMN_ASLABELS"
msgid "For data series in columns: The first column in the range is used as names for data series. For data series in rows: The first column in the range is used as categories. The remaining columns comprise the data columns. If this check box is not selected, all columns are data columns."
msgstr "열 기준 데이터 계열의 경우 범위 내 첫 열은 데이터 계열의 이름으로 사용됩니다. 행 기준 데이터 계열의 경우 범위 내 첫 열은 범주로 사용됩니다. 나머지 열은 데이터 열로 구성됩니다. 이 확인란을 선택하지 않으면 모든 열이 데이터 열로 간주됩니다."

#. k9TMD
#: chart2/uiconfig/ui/tp_RangeChooser.ui:193
msgctxt "tp_RangeChooser|CB_TIME_BASED"
msgid "Time based charting"
msgstr "시간 기반의 차트"

#. iuxE5
#: chart2/uiconfig/ui/tp_RangeChooser.ui:244
msgctxt "tp_RangeChooser|label1"
msgid "Start Table Index"
msgstr "목차 시작"

#. dnmDQ
#: chart2/uiconfig/ui/tp_RangeChooser.ui:257
msgctxt "tp_RangeChooser|label2"
msgid "End Table Index"
msgstr "목차 종료"

#. FcYeD
#: chart2/uiconfig/ui/tp_RangeChooser.ui:275
msgctxt "tp_RangeChooser|STR_PAGE_DATA_RANGE"
msgid "Data Range"
msgstr "데이터 범위"

#. YfF4A
#: chart2/uiconfig/ui/tp_Scale.ui:55
msgctxt "tp_Scale|CBX_REVERSE"
msgid "_Reverse direction"
msgstr "반대 방향(_R)"

#. DNJFK
#: chart2/uiconfig/ui/tp_Scale.ui:63
msgctxt "tp_Scale|extended_tip|CBX_REVERSE"
msgid "Defines where the lower and where the higher values are displayed at the axis. The unchecked state is the mathematical direction."
msgstr "축에서 하위 값과 상위 값을 지정합니다. 체크되지 않은 상태는 수리적 방향입니다."

#. qBbBL
#: chart2/uiconfig/ui/tp_Scale.ui:75
msgctxt "tp_Scale|CBX_LOGARITHM"
msgid "_Logarithmic scale"
msgstr "로그 배율(_L)"

#. 3wDMa
#: chart2/uiconfig/ui/tp_Scale.ui:83
msgctxt "tp_Scale|extended_tip|CBX_LOGARITHM"
msgid "Specifies that you want the axis to be subdivided logarithmically."
msgstr "축을 대수로 하위 분할하도록 지정합니다."

#. 2B5CL
#: chart2/uiconfig/ui/tp_Scale.ui:102
msgctxt "tp_Scale|TXT_AXIS_TYPE"
msgid "T_ype"
msgstr "유형(_Y)"

#. D6Bre
#: chart2/uiconfig/ui/tp_Scale.ui:118
msgctxt "tp_Scale|LB_AXIS_TYPE"
msgid "Automatic"
msgstr "자동 모드"

#. TCiZu
#: chart2/uiconfig/ui/tp_Scale.ui:119
msgctxt "tp_Scale|LB_AXIS_TYPE"
msgid "Text"
msgstr "텍스트"

#. vAAUB
#: chart2/uiconfig/ui/tp_Scale.ui:120
msgctxt "tp_Scale|LB_AXIS_TYPE"
msgid "Date"
msgstr "날짜"

#. 8YZhv
#: chart2/uiconfig/ui/tp_Scale.ui:124
msgctxt "tp_Scale|extended_tip|LB_AXIS_TYPE"
msgid "For some types of axes, you can select to format an axis as text or date, or to detect the type automatically."
msgstr "일부 유형의 축에서는 축을 텍스트 또는 날짜 형식으로 지정하거나 자동으로 검색하도록 선택할 수 있습니다."

#. Vf7vB
#: chart2/uiconfig/ui/tp_Scale.ui:159
msgctxt "tp_Scale|TXT_MIN"
msgid "_Minimum"
msgstr "최소(_M)"

#. XUKzj
#: chart2/uiconfig/ui/tp_Scale.ui:173
msgctxt "tp_Scale|TXT_MAX"
msgid "Ma_ximum"
msgstr "최대(_X)"

#. 4jRuB
#: chart2/uiconfig/ui/tp_Scale.ui:185
msgctxt "tp_Scale|CBX_AUTO_MIN"
msgid "_Automatic"
msgstr "자동(_A)"

#. Bx5Co
#: chart2/uiconfig/ui/tp_Scale.ui:199
msgctxt "tp_Scale|CBX_AUTO_MAX"
msgid "A_utomatic"
msgstr "자동(_U)"

#. 2Kb67
#: chart2/uiconfig/ui/tp_Scale.ui:221
msgctxt "tp_Scale|extended_tip|EDT_MIN"
msgid "Defines the minimum value for the beginning of the axis."
msgstr "축 시작의 최소값을 지정합니다."

#. AvhE9
#: chart2/uiconfig/ui/tp_Scale.ui:240
msgctxt "tp_Scale|extended_tip|EDT_MAX"
msgid "Defines the maximum value for the end of the axis."
msgstr "축 끝의 최대값을 지정합니다."

#. TsHtd
#: chart2/uiconfig/ui/tp_Scale.ui:265
msgctxt "tp_Scale|TXT_TIME_RESOLUTION"
msgid "R_esolution"
msgstr "해상도(_E):"

#. DwrAu
#: chart2/uiconfig/ui/tp_Scale.ui:281
msgctxt "tp_Scale|DATE-RESOLUTION"
msgid "Days"
msgstr ""

#. NL9uN
#: chart2/uiconfig/ui/tp_Scale.ui:282
msgctxt "tp_Scale|DATE-RESOLUTION"
msgid "Months"
msgstr ""

#. BfyLg
#: chart2/uiconfig/ui/tp_Scale.ui:283
msgctxt "tp_Scale|DATE-RESOLUTION"
msgid "Years"
msgstr ""

#. WUANc
#: chart2/uiconfig/ui/tp_Scale.ui:287
msgctxt "tp_Scale|extended_tip|LB_TIME_RESOLUTION"
msgid "Resolution can be set to show days, months, or years as interval steps."
msgstr "표시를 전환하여 더 많거나 적은 세부 정보를 표시합니다."

#. ezN7c
#: chart2/uiconfig/ui/tp_Scale.ui:299
msgctxt "tp_Scale|CBX_AUTO_TIME_RESOLUTION"
msgid "Automat_ic"
msgstr "자동(_I)"

#. DbJt9
#: chart2/uiconfig/ui/tp_Scale.ui:328
msgctxt "tp_Scale|TXT_STEP_MAIN"
msgid "Ma_jor interval"
msgstr "최대 간격(_J)"

#. AtZ6D
#: chart2/uiconfig/ui/tp_Scale.ui:358
msgctxt "tp_Scale|extended_tip|MT_MAIN_DATE_STEP"
msgid "Major interval can be set to show a certain number of days, months, or years."
msgstr "쿼리의 모든 레코드를 표시하려면 선택합니다."

#. yyPFB
#: chart2/uiconfig/ui/tp_Scale.ui:373 chart2/uiconfig/ui/tp_Scale.ui:515
msgctxt "tp_Scale|liststoreDATE"
msgid "Days"
msgstr "일"

#. 8xKtE
#: chart2/uiconfig/ui/tp_Scale.ui:374 chart2/uiconfig/ui/tp_Scale.ui:516
msgctxt "tp_Scale|liststoreDATE"
msgid "Months"
msgstr "월"

#. WRUy8
#: chart2/uiconfig/ui/tp_Scale.ui:375 chart2/uiconfig/ui/tp_Scale.ui:517
msgctxt "tp_Scale|liststoreDATE"
msgid "Years"
msgstr "연도"

#. BD5BE
#: chart2/uiconfig/ui/tp_Scale.ui:379
msgctxt "tp_Scale|extended_tip|LB_MAIN_TIME_UNIT"
msgid "Major interval can be set to show a certain number of days, months, or years."
msgstr "쿼리의 모든 레코드를 표시하려면 선택합니다."

#. a2Gjv
#: chart2/uiconfig/ui/tp_Scale.ui:406
msgctxt "tp_Scale|extended_tip|EDT_STEP_MAIN"
msgid "Defines the interval for the main division of the axes."
msgstr "축의 주 분할선 간격을 지정합니다."

#. UMEd3
#: chart2/uiconfig/ui/tp_Scale.ui:425
msgctxt "tp_Scale|CBX_AUTO_STEP_MAIN"
msgid "Au_tomatic"
msgstr "자동(_T)"

#. Pv5GU
#: chart2/uiconfig/ui/tp_Scale.ui:459
msgctxt "tp_Scale|TXT_STEP_HELP"
msgid "Minor inter_val"
msgstr "최소 간격(_V)"

#. WMGqg
#: chart2/uiconfig/ui/tp_Scale.ui:473
msgctxt "tp_Scale|TXT_STEP_HELP_COUNT"
msgid "Minor inter_val count"
msgstr "최소 간격 수(_V)"

#. c9m8j
#: chart2/uiconfig/ui/tp_Scale.ui:500
msgctxt "tp_Scale|extended_tip|MT_STEPHELP"
msgid "Defines the interval for the subdivision of the axes."
msgstr "축의 하위 분할선 간격을 지정합니다."

#. snFL6
#: chart2/uiconfig/ui/tp_Scale.ui:521
msgctxt "tp_Scale|extended_tip|LB_HELP_TIME_UNIT"
msgid "Minor interval can be set to show a certain number of days, months, or years."
msgstr "쿼리의 모든 레코드를 표시하려면 선택합니다."

#. X8FAK
#: chart2/uiconfig/ui/tp_Scale.ui:533
msgctxt "tp_Scale|CBX_AUTO_STEP_HELP"
msgid "Aut_omatic"
msgstr "자동(_O)"

#. GAKPN
#: chart2/uiconfig/ui/tp_Scale.ui:562
msgctxt "tp_Scale|TXT_ORIGIN"
msgid "Re_ference value"
msgstr "참조 값(_F)"

#. HbRqw
#: chart2/uiconfig/ui/tp_Scale.ui:582
msgctxt "tp_Scale|extended_tip|EDT_ORIGIN"
msgid "Specifies at which position to display the values along the axis."
msgstr "축에서 값을 표시할 위치를 지정합니다."

#. Dj9GB
#: chart2/uiconfig/ui/tp_Scale.ui:594
msgctxt "tp_Scale|CBX_AUTO_ORIGIN"
msgid "Automat_ic"
msgstr "자동(_I)"

#. Z35M3
#: chart2/uiconfig/ui/tp_Scale.ui:602
msgctxt "tp_Scale|extended_tip|CBX_AUTO_ORIGIN"
msgid "You must first deselect the Automatic option in order to modify the values."
msgstr "값을 수정하려면 먼저 자동 옵션을 선택 취소해야 합니다."

#. wqR5C
#: chart2/uiconfig/ui/tp_Scale.ui:625
msgctxt "tp_Scale|FL_SCALE"
msgid "Scale"
msgstr "배율"

#. YK66G
#: chart2/uiconfig/ui/tp_SeriesToAxis.ui:38
msgctxt "tp_SeriesToAxis|RBT_OPT_AXIS_1"
msgid "Primary Y axis"
msgstr "1차 Y 축"

#. ApXPx
#: chart2/uiconfig/ui/tp_SeriesToAxis.ui:47
msgctxt "tp_SeriesToAxis|extended_tip|RBT_OPT_AXIS_1"
msgid "This option is active as default. All data series are aligned to the primary Y axis."
msgstr "이 옵션은 기본적으로 활성화되어 있습니다. 모든 데이터 계열은 1차 Y 축에 맞춰집니다."

#. aZ7G8
#: chart2/uiconfig/ui/tp_SeriesToAxis.ui:59
msgctxt "tp_SeriesToAxis|RBT_OPT_AXIS_2"
msgid "Secondary Y axis"
msgstr "2차 Y 축"

#. nTQUy
#: chart2/uiconfig/ui/tp_SeriesToAxis.ui:68
msgctxt "tp_SeriesToAxis|extended_tip|RBT_OPT_AXIS_2"
msgid "Changes the scaling of the Y axis. This axis is only visible when at least one data series is assigned to it and the axis view is active."
msgstr "Y 축 배율을 변경합니다. 이 축은 하나 이상의 데이터 계열이 이 축에 할당되고 축 보기가 활성화된 경우에만 표시됩니다."

#. hV3cT
#: chart2/uiconfig/ui/tp_SeriesToAxis.ui:84
msgctxt "tp_SeriesToAxis|label1"
msgid "Align Data Series to"
msgstr "데이터 계열 맞춤"

#. GAF6S
#: chart2/uiconfig/ui/tp_SeriesToAxis.ui:123
msgctxt "tp_SeriesToAxis|FT_GAP"
msgid "_Spacing"
msgstr "간격(_S):"

#. 27wWb
#: chart2/uiconfig/ui/tp_SeriesToAxis.ui:136
msgctxt "tp_SeriesToAxis|FT_OVERLAP"
msgid "_Overlap"
msgstr "오버랩(_O)"

#. NKaBT
#: chart2/uiconfig/ui/tp_SeriesToAxis.ui:153
msgctxt "tp_SeriesToAxis|extended_tip|MT_GAP"
msgid "Defines the spacing between the columns in percent."
msgstr "세로 막대 사이의 간격을 백분율로 지정합니다."

#. 8E3zD
#: chart2/uiconfig/ui/tp_SeriesToAxis.ui:170
msgctxt "tp_SeriesToAxis|extended_tip|MT_OVERLAP"
msgid "Defines the necessary settings for overlapping data series."
msgstr "데이터 계열 겹치기에 필요한 설정을 정의합니다."

#. uV5Dn
#: chart2/uiconfig/ui/tp_SeriesToAxis.ui:188
msgctxt "tp_SeriesToAxis|CB_BARS_SIDE_BY_SIDE"
msgid "Show _bars side by side"
msgstr "막대를 나란히 표시(_B)"

#. U5ruY
#: chart2/uiconfig/ui/tp_SeriesToAxis.ui:197
msgctxt "tp_SeriesToAxis|extended_tip|CB_BARS_SIDE_BY_SIDE"
msgid "The bars from different data series are shown as if they were attached only to one axis."
msgstr "그러면 서로 다른 데이터 계열들이 겹치지 않고 표시됩니다."

#. b7cbo
#: chart2/uiconfig/ui/tp_SeriesToAxis.ui:209
msgctxt "tp_SeriesToAxis|CB_CONNECTOR"
msgid "Connection lines"
msgstr "연결선"

#. 42zFb
#: chart2/uiconfig/ui/tp_SeriesToAxis.ui:218
msgctxt "tp_SeriesToAxis|extended_tip|CB_CONNECTOR"
msgid "For \"stacked\" and \"percent\" column (vertical bar) charts, mark this check box to connect the column layers that belong together with lines."
msgstr "\"누적\" 및 \"백분율\" 세로 막대형 차트의 경우, 같은 막대에 속하는 세로 막대 층을 선으로 연결하려면 이 확인란을 선택합니다."

#. VHcU3
#: chart2/uiconfig/ui/tp_SeriesToAxis.ui:234
msgctxt "tp_SeriesToAxis|label2"
msgid "Settings"
msgstr "설정"

#. zaB5V
#: chart2/uiconfig/ui/tp_SeriesToAxis.ui:272
msgctxt "tp_SeriesToAxis|FT_MISSING_VALUES"
msgid "Plot missing values"
msgstr "플롯 누락"

#. fqYSM
#: chart2/uiconfig/ui/tp_SeriesToAxis.ui:282
msgctxt "tp_SeriesToAxis|RB_DONT_PAINT"
msgid "_Leave gap"
msgstr "간격 남기기(_L)"

#. CFmcS
#: chart2/uiconfig/ui/tp_SeriesToAxis.ui:291
msgctxt "tp_SeriesToAxis|extended_tip|RB_DONT_PAINT"
msgid "For a missing value, no data will be shown. This is the default for chart types Column, Bar, Line, Net."
msgstr "누락된 값에 대해 데이터가 표시되지 않습니다. 열, 모음, 선, 네트워크 차트 유형에 대한 기본값입니다."

#. ZvtoD
#: chart2/uiconfig/ui/tp_SeriesToAxis.ui:302
msgctxt "tp_SeriesToAxis|RB_ASSUME_ZERO"
msgid "_Assume zero"
msgstr "0으로 취급(_A)"

#. y6EGH
#: chart2/uiconfig/ui/tp_SeriesToAxis.ui:311
msgctxt "tp_SeriesToAxis|extended_tip|RB_ASSUME_ZERO"
msgid "For a missing value, the y-value will be shown as zero. This is the default for chart type Area."
msgstr "누락된 값에 대해 y 값이 0으로 표시됩니다. 영역 차트 유형에 대한 기본값입니다."

#. 8rLB4
#: chart2/uiconfig/ui/tp_SeriesToAxis.ui:322
msgctxt "tp_SeriesToAxis|RB_CONTINUE_LINE"
msgid "_Continue line"
msgstr "연속선(_C)"

#. 2HArG
#: chart2/uiconfig/ui/tp_SeriesToAxis.ui:331
msgctxt "tp_SeriesToAxis|extended_tip|RB_CONTINUE_LINE"
msgid "For a missing value, the interpolation from the neighbor values will be shown. This is the default for chart type XY."
msgstr "누락된 값에 대해 인근값의 보간법이 표시됩니다. XY 차트 유형에 대한 기본값입니다."

#. Nw9LX
#: chart2/uiconfig/ui/tp_SeriesToAxis.ui:355
msgctxt "tp_SeriesToAxis|CB_INCLUDE_HIDDEN_CELLS"
msgid "Include _values from hidden cells"
msgstr "숨겨진 셀의 값 포함(_V)"

#. vEDHo
#: chart2/uiconfig/ui/tp_SeriesToAxis.ui:364
msgctxt "tp_SeriesToAxis|extended_tip|CB_INCLUDE_HIDDEN_CELLS"
msgid "Check to also show values of currently hidden cells within the source cell range."
msgstr "소스 셀 범위에서 현재 숨겨진 셀의 값도 표시하려면 선택합니다."

#. LvZ8x
#: chart2/uiconfig/ui/tp_SeriesToAxis.ui:380
msgctxt "tp_SeriesToAxis|label3"
msgid "Plot Options"
msgstr "플롯 선택 사항"

#. gRgPX
#: chart2/uiconfig/ui/tp_SeriesToAxis.ui:409
msgctxt "tp_SeriesToAxis|CB_LEGEND_ENTRY_HIDDEN"
msgid "Hide legend entry"
msgstr "범례 항목 숨기기"

#. GFmDA
#: chart2/uiconfig/ui/tp_SeriesToAxis.ui:417
msgctxt "tp_SeriesToAxis|extended_tip|CB_LEGEND_ENTRY_HIDDEN"
msgid "Do not show legend entry for the selected data series or data point."
msgstr ""

#. q8CTC
#: chart2/uiconfig/ui/tp_SeriesToAxis.ui:433
msgctxt "tp_SeriesToAxis|label4"
msgid "Legend Entry"
msgstr "범례 항목"

#. FsWAE
#: chart2/uiconfig/ui/tp_Trendline.ui:56
msgctxt "tp_Trendline|linear"
msgid "_Linear"
msgstr "선형(_L)"

#. jir3B
#: chart2/uiconfig/ui/tp_Trendline.ui:65
msgctxt "tp_Trendline|extended_tip|linear"
msgid "A linear trend line is shown."
msgstr "선형 추세선을 보여줍니다."

#. u3nKx
#: chart2/uiconfig/ui/tp_Trendline.ui:76
msgctxt "tp_Trendline|logarithmic"
msgid "L_ogarithmic"
msgstr "대수(_O)"

#. AZT5a
#: chart2/uiconfig/ui/tp_Trendline.ui:85
msgctxt "tp_Trendline|extended_tip|logarithmic"
msgid "A logarithmic trend line is shown."
msgstr "로그함수형 추세선을 보여줍니다."

#. fPNok
#: chart2/uiconfig/ui/tp_Trendline.ui:96
msgctxt "tp_Trendline|exponential"
msgid "_Exponential"
msgstr "지수(_E)"

#. gufBS
#: chart2/uiconfig/ui/tp_Trendline.ui:105
msgctxt "tp_Trendline|extended_tip|exponential"
msgid "An exponential trend line is shown."
msgstr "지수함수형 추세선을 표시합니다."

#. a6FDp
#: chart2/uiconfig/ui/tp_Trendline.ui:116
msgctxt "tp_Trendline|power"
msgid "Po_wer"
msgstr "거듭제곱(_W)"

#. sU36A
#: chart2/uiconfig/ui/tp_Trendline.ui:125
msgctxt "tp_Trendline|extended_tip|power"
msgid "A power trend line is shown."
msgstr "2차 함수형 추세선을 표시합니다."

#. QCeGG
#: chart2/uiconfig/ui/tp_Trendline.ui:191
msgctxt "tp_Trendline|polynomial"
msgid "_Polynomial"
msgstr "다항식(_P)"

#. f9EeD
#: chart2/uiconfig/ui/tp_Trendline.ui:200
msgctxt "tp_Trendline|extended_tip|polynomial"
msgid "A polynomial trend line is shown with a given degree."
msgstr "주어진 차수로 다항 추세선이 표시됩니다."

#. mGkUE
#: chart2/uiconfig/ui/tp_Trendline.ui:213
msgctxt "tp_Trendline|label3"
msgid "Degree"
msgstr "차수"

#. HwBsk
#: chart2/uiconfig/ui/tp_Trendline.ui:218
msgctxt "tp_Trendline|extended_tip|label3"
msgid "Degree of polynomial trend line."
msgstr "다항 추세선의 차수"

#. EAkKg
#: chart2/uiconfig/ui/tp_Trendline.ui:236
msgctxt "tp_Trendline|extended_tip|degree"
msgid "Degree of polynomial trend line."
msgstr "다항 추세선의 차수"

#. BkiE2
#: chart2/uiconfig/ui/tp_Trendline.ui:258
msgctxt "tp_Trendline|movingAverage"
msgid "_Moving Average"
msgstr "이동 평균(_M)"

#. F5WMz
#: chart2/uiconfig/ui/tp_Trendline.ui:267
msgctxt "tp_Trendline|extended_tip|movingAverage"
msgid "A moving average trend line is shown with a given period."
msgstr "일정 기간 동안의 이동 평균 추세선이 표시됩니다."

#. ZvFov
#: chart2/uiconfig/ui/tp_Trendline.ui:280
msgctxt "tp_Trendline|label4"
msgid "Period"
msgstr "기간"

#. akCwy
#: chart2/uiconfig/ui/tp_Trendline.ui:285
msgctxt "tp_Trendline|extended_tip|label4"
msgid "Number of points to calculate average of moving average trend line."
msgstr "이동 평균 추세선의 평균을 계산하는 점의 수"

#. g3mex
#: chart2/uiconfig/ui/tp_Trendline.ui:304
msgctxt "tp_Trendline|extended_tip|period"
msgid "Number of points to calculate average of moving average trend line."
msgstr "이동 평균 추세선의 평균을 계산하는 점의 수"

#. QLnAh
#: chart2/uiconfig/ui/tp_Trendline.ui:317
msgctxt "tp_Trendline|label10"
msgid "_Type"
msgstr ""

#. P6TjC
#: chart2/uiconfig/ui/tp_Trendline.ui:322
msgctxt "tp_Trendline|extended_tip|label10"
msgid "How the trend line is calculated."
msgstr ""

#. GWKEC
#: chart2/uiconfig/ui/tp_Trendline.ui:336
msgctxt "tp_Trendline|liststore_moving_type"
msgid "Prior"
msgstr ""

#. ZxUZe
#: chart2/uiconfig/ui/tp_Trendline.ui:337
msgctxt "tp_Trendline|liststore_moving_type"
msgid "Central"
msgstr ""

#. 4CBxe
#: chart2/uiconfig/ui/tp_Trendline.ui:338
msgctxt "tp_Trendline|liststore_moving_type"
msgid "Averaged Abscissa"
msgstr ""

#. ptaCA
#: chart2/uiconfig/ui/tp_Trendline.ui:379
msgctxt "tp_Trendline|label1"
msgid "Regression Type"
msgstr "회귀 유형"

#. mNh7m
#: chart2/uiconfig/ui/tp_Trendline.ui:412
msgctxt "tp_Trendline|label7"
msgid "Extrapolate Forward"
msgstr "순방향 외삽법"

#. 4HshA
#: chart2/uiconfig/ui/tp_Trendline.ui:418
msgctxt "tp_Trendline|extended_tip|label7"
msgid "Trend line is extrapolated for higher x-values."
msgstr "추세선이 더 높은 x 값으로 추정되었습니다."

#. tUrKr
#: chart2/uiconfig/ui/tp_Trendline.ui:431
msgctxt "tp_Trendline|label8"
msgid "Extrapolate Backward"
msgstr "역방향 외삽법"

#. tEfNE
#: chart2/uiconfig/ui/tp_Trendline.ui:437
msgctxt "tp_Trendline|extended_tip|label8"
msgid "Trend line is extrapolated for lower x-values."
msgstr "추세선이 더 낮은 x 값으로 추정되었습니다."

#. BGkFJ
#: chart2/uiconfig/ui/tp_Trendline.ui:476
msgctxt "tp_Trendline|setIntercept"
msgid "Force _Intercept"
msgstr "강제 절편(_Intercept)"

#. ZJUti
#: chart2/uiconfig/ui/tp_Trendline.ui:487
msgctxt "tp_Trendline|extended_tip|setIntercept"
msgid "For linear, polynomial and exponential trend lines, intercept value is forced to a given value."
msgstr "선형, 다항식, 지수 추세선의 경우 절편값을 지정한 값으로 강제 설정합니다."

#. CSHNm
#: chart2/uiconfig/ui/tp_Trendline.ui:498
msgctxt "tp_Trendline|showEquation"
msgid "Show E_quation"
msgstr "수식 표시(_Q)"

#. nXrm7
#: chart2/uiconfig/ui/tp_Trendline.ui:506
msgctxt "tp_Trendline|extended_tip|showEquation"
msgid "Shows the trend line equation next to the trend line."
msgstr "추세선 방정식을 추세선 옆에 표시합니다."

#. cA58s
#: chart2/uiconfig/ui/tp_Trendline.ui:518
msgctxt "tp_Trendline|showCorrelationCoefficient"
msgid "Show _Coefficient of Determination (R²)"
msgstr "결정 계수 표시(R²) (_C)"

#. CCyCH
#: chart2/uiconfig/ui/tp_Trendline.ui:526
msgctxt "tp_Trendline|extended_tip|showCorrelationCoefficient"
msgid "Shows the coefficient of determination next to the trend line."
msgstr "추세선의 결정 계수를 표시합니다."

#. 2S6og
#: chart2/uiconfig/ui/tp_Trendline.ui:540
msgctxt "tp_Trendline|label5"
msgid "Trendline _Name"
msgstr "추세선 이름(_N)"

#. GasKo
#: chart2/uiconfig/ui/tp_Trendline.ui:546
msgctxt "tp_Trendline|extended_tip|label5"
msgid "Name of trend line in legend."
msgstr "범례의 추세선 이름"

#. FBT3Y
#: chart2/uiconfig/ui/tp_Trendline.ui:563
msgctxt "tp_Trendline|extended_tip|entry_name"
msgid "Name of trend line in legend."
msgstr "범례의 추세선 이름"

#. C4C6e
#: chart2/uiconfig/ui/tp_Trendline.ui:586
msgctxt "tp_Trendline|extended_tip|interceptValue"
msgid "Value of intercept if it is forced."
msgstr "강제로 설정될 절편값"

#. GEKL2
#: chart2/uiconfig/ui/tp_Trendline.ui:599
msgctxt "tp_Trendline|label6"
msgid "_X Variable Name"
msgstr "_X 변수명"

#. 99kQL
#: chart2/uiconfig/ui/tp_Trendline.ui:605
msgctxt "tp_Trendline|extended_tip|label6"
msgid "Name of X variable in trend line equation."
msgstr "추세선 방정식의 X 변수 이름"

#. Fz8b3
#: chart2/uiconfig/ui/tp_Trendline.ui:622
msgctxt "tp_Trendline|extended_tip|entry_Xname"
msgid "Name of X variable in trend line equation."
msgstr "추세선 방정식의 X 변수 이름"

#. GDQuF
#: chart2/uiconfig/ui/tp_Trendline.ui:635
msgctxt "tp_Trendline|label9"
msgid "_Y Variable Name"
msgstr "_Y 변수명"

#. 2PBW3
#: chart2/uiconfig/ui/tp_Trendline.ui:641
msgctxt "tp_Trendline|extended_tip|label9"
msgid "Name of Y variable in trend line equation."
msgstr "추세선 방정식의 Y 변수 이름"

#. WHNXu
#: chart2/uiconfig/ui/tp_Trendline.ui:658
msgctxt "tp_Trendline|extended_tip|entry_Yname"
msgid "Name of Y variable in trend line equation."
msgstr "추세선 방정식의 Y 변수 이름"

#. 9WeUe
#: chart2/uiconfig/ui/tp_Trendline.ui:679
msgctxt "tp_Trendline|label2"
msgid "Options"
msgstr "옵션"

#. ntcUA
#: chart2/uiconfig/ui/tp_axisLabel.ui:19
msgctxt "tp_axisLabel|showlabelsCB"
msgid "Sho_w labels"
msgstr "레이블 표시(_W)"

#. Xr5zw
#: chart2/uiconfig/ui/tp_axisLabel.ui:28
msgctxt "tp_axisLabel|extended_tip|showlabelsCB"
msgid "Specifies whether to show or hide the axis labels."
msgstr "축 레이블의 표시 여부를 지정합니다."

#. HFhGL
#: chart2/uiconfig/ui/tp_axisLabel.ui:62
msgctxt "tp_axisLabel|tile"
msgid "_Tile"
msgstr "바둑판식 배치(_T)"

#. cmjFi
#: chart2/uiconfig/ui/tp_axisLabel.ui:71
msgctxt "tp_axisLabel|extended_tip|tile"
msgid "Arranges numbers on the axis side by side."
msgstr "축의 숫자를 나란히 배열합니다."

#. tHrCD
#: chart2/uiconfig/ui/tp_axisLabel.ui:83
msgctxt "tp_axisLabel|odd"
msgid "St_agger odd"
msgstr "위-아래 엇갈림(_A)"

#. Q8h6B
#: chart2/uiconfig/ui/tp_axisLabel.ui:92
msgctxt "tp_axisLabel|extended_tip|odd"
msgid "Staggers numbers on the axis, even numbers lower than odd numbers."
msgstr "짝수가 홀수 아래에 오도록 축의 숫자를 엇갈리게 배치합니다."

#. tByen
#: chart2/uiconfig/ui/tp_axisLabel.ui:104
msgctxt "tp_axisLabel|even"
msgid "Stagger _even"
msgstr "아래-위 엇갈림(_E)"

#. 9EMGj
#: chart2/uiconfig/ui/tp_axisLabel.ui:113
msgctxt "tp_axisLabel|extended_tip|even"
msgid "Stagger numbers on the axes, odd numbers lower than even numbers."
msgstr "홀수가 짝수 아래에 오도록 축의 숫자를 엇갈리게 배치합니다."

#. 2JwY3
#: chart2/uiconfig/ui/tp_axisLabel.ui:125
msgctxt "tp_axisLabel|auto"
msgid "A_utomatic"
msgstr "자동(_U)"

#. fj3Rq
#: chart2/uiconfig/ui/tp_axisLabel.ui:134
msgctxt "tp_axisLabel|extended_tip|auto"
msgid "Automatically arranges numbers on the axis."
msgstr "축의 숫자를 자동으로 배열합니다."

#. bFH6L
#: chart2/uiconfig/ui/tp_axisLabel.ui:150
msgctxt "tp_axisLabel|orderL"
msgid "Order"
msgstr "순서"

#. GMtbb
#: chart2/uiconfig/ui/tp_axisLabel.ui:181
msgctxt "tp_axisLabel|overlapCB"
msgid "O_verlap"
msgstr "중첩(_V)"

#. zwgui
#: chart2/uiconfig/ui/tp_axisLabel.ui:189
msgctxt "tp_axisLabel|extended_tip|overlapCB"
msgid "Specifies that the text in cells may overlap other cells."
msgstr "셀의 텍스트가 다른 셀에 겹쳐질 수 있도록 지정합니다."

#. AYpQ8
#: chart2/uiconfig/ui/tp_axisLabel.ui:201
msgctxt "tp_axisLabel|breakCB"
msgid "_Break"
msgstr "중단(_B)"

#. eBwTo
#: chart2/uiconfig/ui/tp_axisLabel.ui:209
msgctxt "tp_axisLabel|extended_tip|breakCB"
msgid "Allows a text break."
msgstr "텍스트 나누기를 허용합니다."

#. 4EwR7
#: chart2/uiconfig/ui/tp_axisLabel.ui:225
msgctxt "tp_axisLabel|textflowL"
msgid "Text Flow"
msgstr "텍스트 흐름"

#. exWTH
#: chart2/uiconfig/ui/tp_axisLabel.ui:281
msgctxt "tp_axisLabel|extended_tip|OrientDegree"
msgid "Allows you to manually enter the orientation angle."
msgstr "수동으로 방향 각도를 입력할 수 있게 해줍니다."

#. 5teDt
#: chart2/uiconfig/ui/tp_axisLabel.ui:295
msgctxt "tp_axisLabel|degreeL"
msgid "_Degrees"
msgstr "각도(_D)"

#. jFKoF
#: chart2/uiconfig/ui/tp_axisLabel.ui:330
msgctxt "tp_axisLabel|stackedCB"
msgid "Ve_rtically stacked"
msgstr "수직으로 누적(_R)"

#. ra62A
#: chart2/uiconfig/ui/tp_axisLabel.ui:339
msgctxt "tp_axisLabel|extended_tip|stackedCB"
msgid "Assigns vertical text orientation for cell contents."
msgstr "셀 내용의 텍스트 방향을 세로로 지정합니다."

#. JBz5H
#: chart2/uiconfig/ui/tp_axisLabel.ui:351
msgctxt "tp_axisLabel|labelABCD"
msgid "ABCD"
msgstr "ABCD"

#. PE6RQ
#: chart2/uiconfig/ui/tp_axisLabel.ui:368
msgctxt "tp_axisLabel|textdirL"
msgid "Te_xt direction:"
msgstr "텍스트 방향(_X):"

#. YUAjA
#: chart2/uiconfig/ui/tp_axisLabel.ui:382
msgctxt "tp_axisLabel|extended_tip|textdirLB"
msgid "Specify the text direction for a paragraph that uses complex text layout (CTL). This feature is only available if complex text layout support is enabled."
msgstr "복합 문자 언어(CTL)를 사용하는 단락의 텍스트 방향을 지정합니다. 이 기능은 복합 문자 언어 지원이 활성화되어 있는 경우에만 사용할 수 있습니다."

#. NxsBh
#: chart2/uiconfig/ui/tp_axisLabel.ui:401
msgctxt "tp_axisLabel|extended_tip|dialCtrl"
msgid "Clicking anywhere on the wheel defines the variable text orientation."
msgstr "휠의 아무 곳이나 클릭하여 텍스트 방향을 다양하게 지정할 수 있습니다."

#. 3WhzS
#: chart2/uiconfig/ui/tp_axisLabel.ui:416
msgctxt "tp_axisLabel|labelTextOrient"
msgid "Text Orientation"
msgstr "인쇄 방향"

#. tCfsY
#: chart2/uiconfig/ui/wizelementspage.ui:40
msgctxt "wizelementspage|labelPrimaryXaxis"
msgid "_X axis"
msgstr "_X 축"

#. LtEdA
#: chart2/uiconfig/ui/wizelementspage.ui:54
msgctxt "wizelementspage|labelPrimaryYaxis"
msgid "_Y axis"
msgstr "_Y 축"

#. tVeNC
#: chart2/uiconfig/ui/wizelementspage.ui:68
msgctxt "wizelementspage|labelPrimaryZaxis"
msgid "_Z axis"
msgstr "_Z 축"

#. 7qRfe
#: chart2/uiconfig/ui/wizelementspage.ui:87
msgctxt "wizelementspage|extended_tip|primaryXaxis"
msgid "Enter a label for the x-axis (horizontal)."
msgstr "X 축(가로)에 레이블을 입력합니다."

#. 4vThc
#: chart2/uiconfig/ui/wizelementspage.ui:105
msgctxt "wizelementspage|extended_tip|primaryYaxis"
msgid "Enter a label for the y-axis (vertical)."
msgstr "Y 축(세로)에 레이블을 입력합니다."

#. 7zPH5
#: chart2/uiconfig/ui/wizelementspage.ui:123
msgctxt "wizelementspage|extended_tip|primaryZaxis"
msgid "Enter a label for the z-axis. This option is only available for three-dimensional charts."
msgstr "Z 축에 레이블을 입력합니다. 이 옵션은 3차원 차트에서만 사용할 수 있습니다."

#. Qpj9H
#: chart2/uiconfig/ui/wizelementspage.ui:136
msgctxt "wizelementspage|labelMainTitle"
msgid "_Title"
msgstr "제목(_T)"

#. nPAjY
#: chart2/uiconfig/ui/wizelementspage.ui:150
msgctxt "wizelementspage|labelSubTitle"
msgid "_Subtitle"
msgstr "부제(_S)"

#. CWmMQ
#: chart2/uiconfig/ui/wizelementspage.ui:169
msgctxt "wizelementspage|extended_tip|maintitle"
msgid "Enter a title for your chart."
msgstr "차트 제목을 입력합니다."

#. eNDvd
#: chart2/uiconfig/ui/wizelementspage.ui:187
msgctxt "wizelementspage|extended_tip|subtitle"
msgid "Enter a subtitle for your chart."
msgstr "차트 부제를 입력합니다."

#. GJ7pJ
#: chart2/uiconfig/ui/wizelementspage.ui:200
msgctxt "wizelementspage|labelSecondaryXAxis"
msgid "X _axis"
msgstr "X 축(_A)"

#. bBRgE
#: chart2/uiconfig/ui/wizelementspage.ui:214
msgctxt "wizelementspage|labelSecondaryYAxis"
msgid "Y ax_is"
msgstr "Y 축(_I)"

#. NGoMT
#: chart2/uiconfig/ui/wizelementspage.ui:233
msgctxt "wizelementspage|extended_tip|secondaryXaxis"
msgid "Enter a label for the secondary x-axis. This option is only available for charts that support a secondary x-axis."
msgstr "보조 X축의 레이블을 입력합니다. 이 옵션은 보조 X축이 지원되는 차트에서만 쓸 수 있습니다."

#. E6Y7y
#: chart2/uiconfig/ui/wizelementspage.ui:269
msgctxt "wizelementspage|show"
msgid "_Display legend"
msgstr "범례 표시(_D)"

#. QWAen
#: chart2/uiconfig/ui/wizelementspage.ui:277
msgctxt "wizelementspage|extended_tip|show"
msgid "Specifies whether to display a legend for the chart."
msgstr "차트의 범례를 표시할지 여부를 지정합니다."

#. ejdzz
#: chart2/uiconfig/ui/wizelementspage.ui:295
msgctxt "wizelementspage|left"
msgid "_Left"
msgstr "왼쪽 맞춤(_L)"

#. tGgc2
#: chart2/uiconfig/ui/wizelementspage.ui:304
msgctxt "wizelementspage|extended_tip|left"
msgid "Positions the legend at the left of the chart."
msgstr "범례를 차트 왼쪽에 배치합니다."

#. EjE6h
#: chart2/uiconfig/ui/wizelementspage.ui:315
msgctxt "wizelementspage|right"
msgid "_Right"
msgstr "오른쪽(_R)"

#. rvAN8
#: chart2/uiconfig/ui/wizelementspage.ui:324
msgctxt "wizelementspage|extended_tip|right"
msgid "Positions the legend at the right of the chart."
msgstr "범례를 차트 오른쪽에 배치합니다."

#. LnxgC
#: chart2/uiconfig/ui/wizelementspage.ui:335
msgctxt "wizelementspage|top"
msgid "_Top"
msgstr "위쪽(_T)"

#. Ehv3g
#: chart2/uiconfig/ui/wizelementspage.ui:344
msgctxt "wizelementspage|extended_tip|top"
msgid "Positions the legend at the top of the chart."
msgstr "범례를 차트 맨 위에 배치합니다."

#. GD2qS
#: chart2/uiconfig/ui/wizelementspage.ui:355
msgctxt "wizelementspage|bottom"
msgid "_Bottom"
msgstr "아래쪽(_B)"

#. NCp3E
#: chart2/uiconfig/ui/wizelementspage.ui:364
msgctxt "wizelementspage|extended_tip|bottom"
msgid "Positions the legend at the bottom of the chart."
msgstr "범례를 차트 맨 아래에 배치합니다."

#. REBEt
#: chart2/uiconfig/ui/wizelementspage.ui:391
msgctxt "wizelementspage|Axe"
msgid "Choose Titles, Legend, and Grid Settings"
msgstr "제목, 범례 및 격자 설정 선택"

#. wp2DC
#: chart2/uiconfig/ui/wizelementspage.ui:421
msgctxt "wizelementspage|x"
msgid "X axis"
msgstr "X 축"

#. KbejV
#: chart2/uiconfig/ui/wizelementspage.ui:429
msgctxt "wizelementspage|extended_tip|x"
msgid "Displays grid lines that are perpendicular to the x-axis."
msgstr "X 축에 수직인 눈금선을 표시합니다."

#. KPGMU
#: chart2/uiconfig/ui/wizelementspage.ui:440
msgctxt "wizelementspage|y"
msgid "Y ax_is"
msgstr "Y 축(_I)"

#. Nivye
#: chart2/uiconfig/ui/wizelementspage.ui:448
msgctxt "wizelementspage|extended_tip|y"
msgid "Displays grid lines that are perpendicular to the y-axis."
msgstr "Y 축에 수직인 눈금선을 표시합니다."

#. G65v4
#: chart2/uiconfig/ui/wizelementspage.ui:459
msgctxt "wizelementspage|z"
msgid "Z axi_s"
msgstr "Z 축(_S)"

#. uVwTv
#: chart2/uiconfig/ui/wizelementspage.ui:467
msgctxt "wizelementspage|extended_tip|z"
msgid "Displays grid lines that are perpendicular to the z-axis. This option is only available for three-dimensional charts."
msgstr "Z 축에 수직인 눈금선을 표시합니다. 이 옵션은 3차원 차트에서만 사용할 수 있습니다."

#. wNqwZ
#: chart2/uiconfig/ui/wizelementspage.ui:482
msgctxt "wizelementspage|label2"
msgid "Display Grids"
msgstr "격자 표시"