path: root/basegfx/source/polygon/b3dpolygontools.cxx

/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
 * This file is part of the LibreOffice project.
 *
 * This Source Code Form is subject to the terms of the Mozilla Public
 * License, v. 2.0. If a copy of the MPL was not distributed with this
 * file, You can obtain one at http://mozilla.org/MPL/2.0/.
 *
 * This file incorporates work covered by the following license notice:
 *
 *   Licensed to the Apache Software Foundation (ASF) under one or more
 *   contributor license agreements. See the NOTICE file distributed
 *   with this work for additional information regarding copyright
 *   ownership. The ASF licenses this file to you under the Apache
 *   License, Version 2.0 (the "License"); you may not use this file
 *   except in compliance with the License. You may obtain a copy of
 *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
 */

#include <osl/diagnose.h>
#include <basegfx/polygon/b3dpolygontools.hxx>
#include <basegfx/polygon/b3dpolygon.hxx>
#include <basegfx/polygon/b3dpolypolygon.hxx>
#include <basegfx/numeric/ftools.hxx>
#include <basegfx/range/b3drange.hxx>
#include <basegfx/point/b2dpoint.hxx>
#include <basegfx/tuple/b3ituple.hxx>
#include <cassert>
#include <numeric>

namespace basegfx::utils
{
        // B3DPolygon tools
        void checkClosed(B3DPolygon& rCandidate)
        {
            while(rCandidate.count() > 1
                && rCandidate.getB3DPoint(0).equal(rCandidate.getB3DPoint(rCandidate.count() - 1)))
            {
                rCandidate.setClosed(true);
                rCandidate.remove(rCandidate.count() - 1);
            }
        }

        sal_uInt32 getIndexOfSuccessor(sal_uInt32 nIndex, const B3DPolygon& rCandidate)
        {
            OSL_ENSURE(nIndex < rCandidate.count(), "getIndexOfPredecessor: Access to polygon out of range (!)");

            if(nIndex + 1 < rCandidate.count())
            {
                return nIndex + 1;
            }
            else
            {
                return 0;
            }
        }

        B3DRange getRange(const B3DPolygon& rCandidate)
        {
            B3DRange aRetval;
            const sal_uInt32 nPointCount(rCandidate.count());

            for(sal_uInt32 a(0); a < nPointCount; a++)
            {
                const B3DPoint aTestPoint(rCandidate.getB3DPoint(a));
                aRetval.expand(aTestPoint);
            }

            return aRetval;
        }

        double getLength(const B3DPolygon& rCandidate)
        {
            double fRetval(0.0);
            const sal_uInt32 nPointCount(rCandidate.count());

            if(nPointCount > 1)
            {
                const sal_uInt32 nLoopCount(rCandidate.isClosed() ? nPointCount : nPointCount - 1);

                for(sal_uInt32 a(0); a < nLoopCount; a++)
                {
                    const sal_uInt32 nNextIndex(getIndexOfSuccessor(a, rCandidate));
                    const B3DPoint aCurrentPoint(rCandidate.getB3DPoint(a));
                    const B3DPoint aNextPoint(rCandidate.getB3DPoint(nNextIndex));
                    const B3DVector aVector(aNextPoint - aCurrentPoint);
                    fRetval += aVector.getLength();
                }
            }

            return fRetval;
        }

        void applyLineDashing(
            const B3DPolygon& rCandidate,
            const std::vector<double>& rDotDashArray,
            B3DPolyPolygon* pLineTarget,
            double fDotDashLength)
        {
            // clear targets in any case
            if(pLineTarget)
            {
                pLineTarget->clear();
            }

            // provide callback as lambda
            auto aLineCallback(
                nullptr == pLineTarget
                ? std::function<void(const basegfx::B3DPolygon&)>()
                : [&pLineTarget](const basegfx::B3DPolygon& rSnippet){ pLineTarget->append(rSnippet); });

            // call version that uses callbacks
            applyLineDashing(
                rCandidate,
                rDotDashArray,
                aLineCallback,
                fDotDashLength);
        }

        static void implHandleSnippet(
            const B3DPolygon& rSnippet,
            const std::function<void(const basegfx::B3DPolygon& rSnippet)>& rTargetCallback,
            B3DPolygon& rFirst,
            B3DPolygon& rLast)
        {
            if(rSnippet.isClosed())
            {
                if(!rFirst.count())
                {
                    rFirst = rSnippet;
                }
                else
                {
                    if(rLast.count())
                    {
                        rTargetCallback(rLast);
                    }

                    rLast = rSnippet;
                }
            }
            else
            {
                rTargetCallback(rSnippet);
            }
        }

        static void implHandleFirstLast(
            const std::function<void(const basegfx::B3DPolygon& rSnippet)>& rTargetCallback,
            B3DPolygon& rFirst,
            B3DPolygon& rLast)
        {
            if(rFirst.count() && rLast.count()
                && rFirst.getB3DPoint(0).equal(rLast.getB3DPoint(rLast.count() - 1)))
            {
                // start of first and end of last are the same -> merge them
                rLast.append(rFirst);
                rLast.removeDoublePoints();
                rFirst.clear();
            }

            if(rLast.count())
            {
                rTargetCallback(rLast);
            }

            if(rFirst.count())
            {
                rTargetCallback(rFirst);
            }
        }

        void applyLineDashing(
            const B3DPolygon& rCandidate,
            const std::vector<double>& rDotDashArray,
            std::function<void(const basegfx::B3DPolygon& rSnippet)> aLineTargetCallback,
            double fDotDashLength)
        {
            const sal_uInt32 nPointCount(rCandidate.count());
            const sal_uInt32 nDotDashCount(rDotDashArray.size());

            if(fTools::lessOrEqual(fDotDashLength, 0.0))
            {
                fDotDashLength = std::accumulate(rDotDashArray.begin(), rDotDashArray.end(), 0.0);
            }

            if(fTools::lessOrEqual(fDotDashLength, 0.0) || !aLineTargetCallback || !nPointCount)
            {
                // parameters make no sense, just add source to targets
                if(aLineTargetCallback)
                {
                    aLineTargetCallback(rCandidate);
                }

                return;
            }

            // precalculate maximal acceptable length of candidate polygon assuming
            // we want to create a maximum of fNumberOfAllowedSnippets. In 3D
            // use less for fNumberOfAllowedSnippets, ca. 6553.6, double due to line & gap.
            // Less in 3D due to potentially blowing up to rounded line segments.
            static const double fNumberOfAllowedSnippets(6553.5 * 2.0);
            const double fAllowedLength((fNumberOfAllowedSnippets * fDotDashLength) / double(rDotDashArray.size()));
            const double fCandidateLength(basegfx::utils::getLength(rCandidate));
            std::vector<double> aDotDashArray(rDotDashArray);

            if(fCandidateLength > fAllowedLength)
            {
                // we would produce more than fNumberOfAllowedSnippets, so
                // adapt aDotDashArray to exactly produce assumed number. Also
                // assert this to let the caller know about it.
                // If this asserts: Please think about checking your DotDashArray
                // before calling this function or evtl. use the callback version
                // to *not* produce that much of data. Even then, you may still
                // think about producing too much runtime (!)
                assert(true && "applyLineDashing: potentially too expensive to do the requested dismantle - please consider stretched LineDash pattern (!)");

                // calculate correcting factor, apply to aDotDashArray and fDotDashLength
                // to enlarge these as needed
                const double fFactor(fCandidateLength / fAllowedLength);
                std::for_each(aDotDashArray.begin(), aDotDashArray.end(), [&fFactor](double &f){ f *= fFactor; });
                fDotDashLength *= fFactor;
            }

            // prepare current edge's start
            B3DPoint aCurrentPoint(rCandidate.getB3DPoint(0));
            const bool bIsClosed(rCandidate.isClosed());
            const sal_uInt32 nEdgeCount(bIsClosed ? nPointCount : nPointCount - 1);

            // prepare DotDashArray iteration and the line/gap switching bool
            sal_uInt32 nDotDashIndex(0);
            bool bIsLine(true);
            double fDotDashMovingLength(aDotDashArray[0]);
            B3DPolygon aSnippet;

            // remember 1st and last snippets to try to merge after execution
            // is complete and hand to callback
            B3DPolygon aFirstLine, aLastLine;

            // iterate over all edges
            for(sal_uInt32 a(0); a < nEdgeCount; a++)
            {
                // update current edge
                const sal_uInt32 nNextIndex((a + 1) % nPointCount);
                const B3DPoint aNextPoint(rCandidate.getB3DPoint(nNextIndex));
                const double fEdgeLength(B3DVector(aNextPoint - aCurrentPoint).getLength());

                if(!fTools::equalZero(fEdgeLength))
                {
                    double fLastDotDashMovingLength(0.0);
                    while(fTools::less(fDotDashMovingLength, fEdgeLength))
                    {
                        // new split is inside edge, create and append snippet [fLastDotDashMovingLength, fDotDashMovingLength]
                        if(bIsLine)
                        {
                            if(!aSnippet.count())
                            {
                                aSnippet.append(interpolate(aCurrentPoint, aNextPoint, fLastDotDashMovingLength / fEdgeLength));
                            }

                            aSnippet.append(interpolate(aCurrentPoint, aNextPoint, fDotDashMovingLength / fEdgeLength));

                            implHandleSnippet(aSnippet, aLineTargetCallback, aFirstLine, aLastLine);

                            aSnippet.clear();
                        }

                        // prepare next DotDashArray step and flip line/gap flag
                        fLastDotDashMovingLength = fDotDashMovingLength;
                        fDotDashMovingLength += aDotDashArray[(++nDotDashIndex) % nDotDashCount];
                        bIsLine = !bIsLine;
                    }

                    // append snippet [fLastDotDashMovingLength, fEdgeLength]
                    if(bIsLine)
                    {
                        if(!aSnippet.count())
                        {
                            aSnippet.append(interpolate(aCurrentPoint, aNextPoint, fLastDotDashMovingLength / fEdgeLength));
                        }

                        aSnippet.append(aNextPoint);
                    }

                    // prepare move to next edge
                    fDotDashMovingLength -= fEdgeLength;
                }

                // prepare next edge step (end point gets new start point)
                aCurrentPoint = aNextPoint;
            }

            // append last intermediate results (if exists)
            if(aSnippet.count())
            {
                if(bIsLine)
                {
                    implHandleSnippet(aSnippet, aLineTargetCallback, aFirstLine, aLastLine);
                }
            }

            if(bIsClosed)
            {
                implHandleFirstLast(aLineTargetCallback, aFirstLine, aLastLine);
            }
        }

        B3DPolygon applyDefaultNormalsSphere( const B3DPolygon& rCandidate, const B3DPoint& rCenter)
        {
            B3DPolygon aRetval(rCandidate);

            for(sal_uInt32 a(0); a < aRetval.count(); a++)
            {
                B3DVector aVector(aRetval.getB3DPoint(a) - rCenter);
                aVector.normalize();
                aRetval.setNormal(a, aVector);
            }

            return aRetval;
        }

        B3DPolygon invertNormals( const B3DPolygon& rCandidate)
        {
            B3DPolygon aRetval(rCandidate);

            if(aRetval.areNormalsUsed())
            {
                for(sal_uInt32 a(0); a < aRetval.count(); a++)
                {
                    aRetval.setNormal(a, -aRetval.getNormal(a));
                }
            }

            return aRetval;
        }

        B3DPolygon applyDefaultTextureCoordinatesParallel( const B3DPolygon& rCandidate, const B3DRange& rRange, bool bChangeX, bool bChangeY)
        {
            B3DPolygon aRetval(rCandidate);

            if(bChangeX || bChangeY)
            {
                // create projection of standard texture coordinates in (X, Y) onto
                // the 3d coordinates straight
                const double fWidth(rRange.getWidth());
                const double fHeight(rRange.getHeight());
                const bool bWidthSet(!fTools::equalZero(fWidth));
                const bool bHeightSet(!fTools::equalZero(fHeight));
                const double fOne(1.0);

                for(sal_uInt32 a(0); a < aRetval.count(); a++)
                {
                    const B3DPoint aPoint(aRetval.getB3DPoint(a));
                    B2DPoint aTextureCoordinate(aRetval.getTextureCoordinate(a));

                    if(bChangeX)
                    {
                        if(bWidthSet)
                        {
                            aTextureCoordinate.setX((aPoint.getX() - rRange.getMinX()) / fWidth);
                        }
                        else
                        {
                            aTextureCoordinate.setX(0.0);
                        }
                    }

                    if(bChangeY)
                    {
                        if(bHeightSet)
                        {
                            aTextureCoordinate.setY(fOne - ((aPoint.getY() - rRange.getMinY()) / fHeight));
                        }
                        else
                        {
                            aTextureCoordinate.setY(fOne);
                        }
                    }

                    aRetval.setTextureCoordinate(a, aTextureCoordinate);
                }
            }

            return aRetval;
        }

        B3DPolygon applyDefaultTextureCoordinatesSphere( const B3DPolygon& rCandidate, const B3DPoint& rCenter, bool bChangeX, bool bChangeY)
        {
            B3DPolygon aRetval(rCandidate);

            if(bChangeX || bChangeY)
            {
                // create texture coordinates using sphere projection to cartesian coordinates,
                // use object's center as base
                const double fOne(1.0);
                const sal_uInt32 nPointCount(aRetval.count());
                bool bPolarPoints(false);
                sal_uInt32 a;

                // create center cartesian coordinates to have a possibility to decide if on boundary
                // transitions which value to choose
                const B3DRange aPlaneRange(getRange(rCandidate));
                const B3DPoint aPlaneCenter(aPlaneRange.getCenter() - rCenter);
                const double fXCenter(fOne - ((atan2(aPlaneCenter.getZ(), aPlaneCenter.getX()) + M_PI) / (2 * M_PI)));

                for(a = 0; a < nPointCount; a++)
                {
                    const B3DVector aVector(aRetval.getB3DPoint(a) - rCenter);
                    const double fY(fOne - ((atan2(aVector.getY(), aVector.getXZLength()) + M_PI_2) / M_PI));
                    B2DPoint aTexCoor(aRetval.getTextureCoordinate(a));

                    if(fTools::equalZero(fY))
                    {
                        // point is a north polar point, no useful X-coordinate can be created.
                        if(bChangeY)
                        {
                            aTexCoor.setY(0.0);

                            if(bChangeX)
                            {
                                bPolarPoints = true;
                            }
                        }
                    }
                    else if(fTools::equal(fY, fOne))
                    {
                        // point is a south polar point, no useful X-coordinate can be created. Set
                        // Y-coordinate, though
                        if(bChangeY)
                        {
                            aTexCoor.setY(fOne);

                            if(bChangeX)
                            {
                                bPolarPoints = true;
                            }
                        }
                    }
                    else
                    {
                        double fX(fOne - ((atan2(aVector.getZ(), aVector.getX()) + M_PI) / (2 * M_PI)));

                        // correct cartesian point coordinate dependent from center value
                        if(fX > fXCenter + 0.5)
                        {
                            fX -= fOne;
                        }
                        else if(fX < fXCenter - 0.5)
                        {
                            fX += fOne;
                        }

                        if(bChangeX)
                        {
                            aTexCoor.setX(fX);
                        }

                        if(bChangeY)
                        {
                            aTexCoor.setY(fY);
                        }
                    }

                    aRetval.setTextureCoordinate(a, aTexCoor);
                }

                if(bPolarPoints)
                {
                    // correct X-texture coordinates if polar points are contained. Those
                    // coordinates cannot be correct, so use prev or next X-coordinate
                    for(a = 0; a < nPointCount; a++)
                    {
                        B2DPoint aTexCoor(aRetval.getTextureCoordinate(a));

                        if(fTools::equalZero(aTexCoor.getY()) || fTools::equal(aTexCoor.getY(), fOne))
                        {
                            // get prev, next TexCoor and test for pole
                            const B2DPoint aPrevTexCoor(aRetval.getTextureCoordinate(a ? a - 1 : nPointCount - 1));
                            const B2DPoint aNextTexCoor(aRetval.getTextureCoordinate((a + 1) % nPointCount));
                            const bool bPrevPole(fTools::equalZero(aPrevTexCoor.getY()) || fTools::equal(aPrevTexCoor.getY(), fOne));
                            const bool bNextPole(fTools::equalZero(aNextTexCoor.getY()) || fTools::equal(aNextTexCoor.getY(), fOne));

                            if(!bPrevPole && !bNextPole)
                            {
                                // both no poles, mix them
                                aTexCoor.setX((aPrevTexCoor.getX() + aNextTexCoor.getX()) / 2.0);
                            }
                            else if(!bNextPole)
                            {
                                // copy next
                                aTexCoor.setX(aNextTexCoor.getX());
                            }
                            else
                            {
                                // copy prev, even if it's a pole, hopefully it is already corrected
                                aTexCoor.setX(aPrevTexCoor.getX());
                            }

                            aRetval.setTextureCoordinate(a, aTexCoor);
                        }
                    }
                }
            }

            return aRetval;
        }

        bool isInside(const B3DPolygon& rCandidate, const B3DPoint& rPoint, bool bWithBorder)
        {
            if(bWithBorder && isPointOnPolygon(rCandidate, rPoint))
            {
                return true;
            }
            else
            {
                bool bRetval(false);
                const B3DVector aPlaneNormal(rCandidate.getNormal());

                if(!aPlaneNormal.equalZero())
                {
                    const sal_uInt32 nPointCount(rCandidate.count());

                    if(nPointCount)
                    {
                        B3DPoint aCurrentPoint(rCandidate.getB3DPoint(nPointCount - 1));
                        const double fAbsX(fabs(aPlaneNormal.getX()));
                        const double fAbsY(fabs(aPlaneNormal.getY()));
                        const double fAbsZ(fabs(aPlaneNormal.getZ()));

                        if(fAbsX > fAbsY && fAbsX > fAbsZ)
                        {
                            // normal points mostly in X-Direction, use YZ-Polygon projection for check
                            // x -> y, y -> z
                            for(sal_uInt32 a(0); a < nPointCount; a++)
                            {
                                const B3DPoint aPreviousPoint(aCurrentPoint);
                                aCurrentPoint = rCandidate.getB3DPoint(a);

                                // cross-over in Z?
                                const bool bCompZA(fTools::more(aPreviousPoint.getZ(), rPoint.getZ()));
                                const bool bCompZB(fTools::more(aCurrentPoint.getZ(), rPoint.getZ()));

                                if(bCompZA != bCompZB)
                                {
                                    // cross-over in Y?
                                    const bool bCompYA(fTools::more(aPreviousPoint.getY(), rPoint.getY()));
                                    const bool bCompYB(fTools::more(aCurrentPoint.getY(), rPoint.getY()));

                                    if(bCompYA == bCompYB)
                                    {
                                        if(bCompYA)
                                        {
                                            bRetval = !bRetval;
                                        }
                                    }
                                    else
                                    {
                                        const double fCompare(
                                            aCurrentPoint.getY() - (aCurrentPoint.getZ() - rPoint.getZ()) *
                                            (aPreviousPoint.getY() - aCurrentPoint.getY()) /
                                            (aPreviousPoint.getZ() - aCurrentPoint.getZ()));

                                        if(fTools::more(fCompare, rPoint.getY()))
                                        {
                                            bRetval = !bRetval;
                                        }
                                    }
                                }
                            }
                        }
                        else if(fAbsY > fAbsX && fAbsY > fAbsZ)
                        {
                            // normal points mostly in Y-Direction, use XZ-Polygon projection for check
                            // x -> x, y -> z
                            for(sal_uInt32 a(0); a < nPointCount; a++)
                            {
                                const B3DPoint aPreviousPoint(aCurrentPoint);
                                aCurrentPoint = rCandidate.getB3DPoint(a);

                                // cross-over in Z?
                                const bool bCompZA(fTools::more(aPreviousPoint.getZ(), rPoint.getZ()));
                                const bool bCompZB(fTools::more(aCurrentPoint.getZ(), rPoint.getZ()));

                                if(bCompZA != bCompZB)
                                {
                                    // cross-over in X?
                                    const bool bCompXA(fTools::more(aPreviousPoint.getX(), rPoint.getX()));
                                    const bool bCompXB(fTools::more(aCurrentPoint.getX(), rPoint.getX()));

                                    if(bCompXA == bCompXB)
                                    {
                                        if(bCompXA)
                                        {
                                            bRetval = !bRetval;
                                        }
                                    }
                                    else
                                    {
                                        const double fCompare(
                                            aCurrentPoint.getX() - (aCurrentPoint.getZ() - rPoint.getZ()) *
                                            (aPreviousPoint.getX() - aCurrentPoint.getX()) /
                                            (aPreviousPoint.getZ() - aCurrentPoint.getZ()));

                                        if(fTools::more(fCompare, rPoint.getX()))
                                        {
                                            bRetval = !bRetval;
                                        }
                                    }
                                }
                            }
                        }
                        else
                        {
                            // normal points mostly in Z-Direction, use XY-Polygon projection for check
                            // x -> x, y -> y
                            for(sal_uInt32 a(0); a < nPointCount; a++)
                            {
                                const B3DPoint aPreviousPoint(aCurrentPoint);
                                aCurrentPoint = rCandidate.getB3DPoint(a);

                                // cross-over in Y?
                                const bool bCompYA(fTools::more(aPreviousPoint.getY(), rPoint.getY()));
                                const bool bCompYB(fTools::more(aCurrentPoint.getY(), rPoint.getY()));

                                if(bCompYA != bCompYB)
                                {
                                    // cross-over in X?
                                    const bool bCompXA(fTools::more(aPreviousPoint.getX(), rPoint.getX()));
                                    const bool bCompXB(fTools::more(aCurrentPoint.getX(), rPoint.getX()));

                                    if(bCompXA == bCompXB)
                                    {
                                        if(bCompXA)
                                        {
                                            bRetval = !bRetval;
                                        }
                                    }
                                    else
                                    {
                                        const double fCompare(
                                            aCurrentPoint.getX() - (aCurrentPoint.getY() - rPoint.getY()) *
                                            (aPreviousPoint.getX() - aCurrentPoint.getX()) /
                                            (aPreviousPoint.getY() - aCurrentPoint.getY()));

                                        if(fTools::more(fCompare, rPoint.getX()))
                                        {
                                            bRetval = !bRetval;
                                        }
                                    }
                                }
                            }
                        }
                    }
                }

                return bRetval;
            }
        }

        bool isPointOnLine(const B3DPoint& rStart, const B3DPoint& rEnd, const B3DPoint& rCandidate, bool bWithPoints)
        {
            if(rCandidate.equal(rStart) || rCandidate.equal(rEnd))
            {
                // candidate is in epsilon around start or end -> inside
                return bWithPoints;
            }
            else if(rStart.equal(rEnd))
            {
                // start and end are equal, but candidate is outside their epsilon -> outside
                return false;
            }
            else
            {
                const B3DVector aEdgeVector(rEnd - rStart);
                const B3DVector aTestVector(rCandidate - rStart);

                if(areParallel(aEdgeVector, aTestVector))
                {
                    double fParamTestOnCurr(0.0);

                    if(aEdgeVector.getX() > aEdgeVector.getY())
                    {
                        if(aEdgeVector.getX() > aEdgeVector.getZ())
                        {
                            // X is biggest
                            fParamTestOnCurr = aTestVector.getX() / aEdgeVector.getX();
                        }
                        else
                        {
                            // Z is biggest
                            fParamTestOnCurr = aTestVector.getZ() / aEdgeVector.getZ();
                        }
                    }
                    else
                    {
                        if(aEdgeVector.getY() > aEdgeVector.getZ())
                        {
                            // Y is biggest
                            fParamTestOnCurr = aTestVector.getY() / aEdgeVector.getY();
                        }
                        else
                        {
                            // Z is biggest
                            fParamTestOnCurr = aTestVector.getZ() / aEdgeVector.getZ();
                        }
                    }

                    if(fTools::more(fParamTestOnCurr, 0.0) && fTools::less(fParamTestOnCurr, 1.0))
                    {
                        return true;
                    }
                }

                return false;
            }
        }

        bool isPointOnPolygon(const B3DPolygon& rCandidate, const B3DPoint& rPoint)
        {
            const sal_uInt32 nPointCount(rCandidate.count());

            if(nPointCount > 1)
            {
                const sal_uInt32 nLoopCount(rCandidate.isClosed() ? nPointCount : nPointCount - 1);
                B3DPoint aCurrentPoint(rCandidate.getB3DPoint(0));

                for(sal_uInt32 a(0); a < nLoopCount; a++)
                {
                    const B3DPoint aNextPoint(rCandidate.getB3DPoint((a + 1) % nPointCount));

                    if(isPointOnLine(aCurrentPoint, aNextPoint, rPoint, true/*bWithPoints*/))
                    {
                        return true;
                    }

                    aCurrentPoint = aNextPoint;
                }
            }
            else if(nPointCount)
            {
                return rPoint.equal(rCandidate.getB3DPoint(0));
            }

            return false;
        }

        bool getCutBetweenLineAndPlane(const B3DVector& rPlaneNormal, const B3DPoint& rPlanePoint, const B3DPoint& rEdgeStart, const B3DPoint& rEdgeEnd, double& fCut)
        {
            if(!rPlaneNormal.equalZero() && !rEdgeStart.equal(rEdgeEnd))
            {
                const B3DVector aTestEdge(rEdgeEnd - rEdgeStart);
                const double fScalarEdge(rPlaneNormal.scalar(aTestEdge));

                if(!fTools::equalZero(fScalarEdge))
                {
                    const B3DVector aCompareEdge(rPlanePoint - rEdgeStart);
                    const double fScalarCompare(rPlaneNormal.scalar(aCompareEdge));

                    fCut = fScalarCompare / fScalarEdge;
                    return true;
                }
            }

            return false;
        }

        // snap points of horizontal or vertical edges to discrete values
        B3DPolygon snapPointsOfHorizontalOrVerticalEdges(const B3DPolygon& rCandidate)
        {
            const sal_uInt32 nPointCount(rCandidate.count());

            if(nPointCount > 1)
            {
                // Start by copying the source polygon to get a writeable copy. The closed state is
                // copied by aRetval's initialisation, too, so no need to copy it in this method
                B3DPolygon aRetval(rCandidate);

                // prepare geometry data. Get rounded from original
                B3ITuple aPrevTuple(basegfx::fround(rCandidate.getB3DPoint(nPointCount - 1)));
                B3DPoint aCurrPoint(rCandidate.getB3DPoint(0));
                B3ITuple aCurrTuple(basegfx::fround(aCurrPoint));

                // loop over all points. This will also snap the implicit closing edge
                // even when not closed, but that's no problem here
                for(sal_uInt32 a(0); a < nPointCount; a++)
                {
                    // get next point. Get rounded from original
                    const bool bLastRun(a + 1 == nPointCount);
                    const sal_uInt32 nNextIndex(bLastRun ? 0 : a + 1);
                    const B3DPoint aNextPoint(rCandidate.getB3DPoint(nNextIndex));
                    const B3ITuple aNextTuple(basegfx::fround(aNextPoint));

                    // get the states
                    const bool bPrevVertical(aPrevTuple.getX() == aCurrTuple.getX());
                    const bool bNextVertical(aNextTuple.getX() == aCurrTuple.getX());
                    const bool bPrevHorizontal(aPrevTuple.getY() == aCurrTuple.getY());
                    const bool bNextHorizontal(aNextTuple.getY() == aCurrTuple.getY());
                    const bool bSnapX(bPrevVertical || bNextVertical);
                    const bool bSnapY(bPrevHorizontal || bNextHorizontal);

                    if(bSnapX || bSnapY)
                    {
                        const B3DPoint aSnappedPoint(
                            bSnapX ? aCurrTuple.getX() : aCurrPoint.getX(),
                            bSnapY ? aCurrTuple.getY() : aCurrPoint.getY(),
                            aCurrPoint.getZ());

                        aRetval.setB3DPoint(a, aSnappedPoint);
                    }

                    // prepare next point
                    if(!bLastRun)
                    {
                        aPrevTuple = aCurrTuple;
                        aCurrPoint = aNextPoint;
                        aCurrTuple = aNextTuple;
                    }
                }

                return aRetval;
            }
            else
            {
                return rCandidate;
            }
        }

} // end of namespace

/* vim:set shiftwidth=4 softtabstop=4 expandtab: */