path: root/onlineupdate/source/service/maintenanceservice.cxx

/* This Source Code Form is subject to the terms of the Mozilla Public
 * License, v. 2.0. If a copy of the MPL was not distributed with this
 * file, You can obtain one at http://mozilla.org/MPL/2.0/. */

#include <windows.h>
#include <shlwapi.h>
#include <stdio.h>
#include <wchar.h>
#include <shlobj.h>

#include "serviceinstall.hxx"
#include "maintenanceservice.hxx"
#include "servicebase.hxx"
#include "workmonitor.hxx"
#include "uachelper.h"
#include "updatehelper.h"

// Link w/ subsystem window so we don't get a console when executing
// this binary through the installer.
#pragma comment(linker, "/SUBSYSTEM:windows")

SERVICE_STATUS gSvcStatus = { 0 };
SERVICE_STATUS_HANDLE gSvcStatusHandle = nullptr;
HANDLE gWorkDoneEvent = nullptr;
HANDLE gThread = nullptr;
bool gServiceControlStopping = false;

// logs are pretty small, about 20 lines, so 10 seems reasonable.
#define LOGS_TO_KEEP 10

BOOL GetLogDirectoryPath(WCHAR *path);

int
wmain(int argc, WCHAR **argv)
{
    if (argc < 2)
    {
        LOG_WARN(("missing mandatory command line argument"));
        return 1;
    }
    // If command-line parameter is "install", install the service
    // or upgrade if already installed
    // If command line parameter is "forceinstall", install the service
    // even if it is older than what is already installed.
    // If command-line parameter is "upgrade", upgrade the service
    // but do not install it if it is not already installed.
    // If command line parameter is "uninstall", uninstall the service.
    // Otherwise, the service is probably being started by the SCM.
    bool forceInstall = !lstrcmpi(argv[1], L"forceinstall");
    if (!lstrcmpi(argv[1], L"install") || forceInstall)
    {
        WCHAR updatePath[MAX_PATH + 1];
        if (GetLogDirectoryPath(updatePath))
        {
            LogInit(updatePath, L"maintenanceservice-install.log");
        }

        SvcInstallAction action = InstallSvc;
        if (forceInstall)
        {
            action = ForceInstallSvc;
            LOG(("Installing service with force specified..."));
        }
        else
        {
            LOG(("Installing service..."));
        }

        bool ret = SvcInstall(action);
        if (!ret)
        {
            LOG_WARN(("Could not install service.  (%d)", GetLastError()));
            LogFinish();
            return 1;
        }

        LOG(("The service was installed successfully"));
        LogFinish();
        return 0;
    }

    if (!lstrcmpi(argv[1], L"upgrade"))
    {
        WCHAR updatePath[MAX_PATH + 1];
        if (GetLogDirectoryPath(updatePath))
        {
            LogInit(updatePath, L"maintenanceservice-install.log");
        }

        LOG(("Upgrading service if installed..."));
        if (!SvcInstall(UpgradeSvc))
        {
            LOG_WARN(("Could not upgrade service.  (%d)", GetLastError()));
            LogFinish();
            return 1;
        }

        LOG(("The service was upgraded successfully"));
        LogFinish();
        return 0;
    }

    if (!lstrcmpi(argv[1], L"uninstall"))
    {
        WCHAR updatePath[MAX_PATH + 1];
        if (GetLogDirectoryPath(updatePath))
        {
            LogInit(updatePath, L"maintenanceservice-uninstall.log");
        }
        LOG(("Uninstalling service..."));
        if (!SvcUninstall())
        {
            LOG_WARN(("Could not uninstall service.  (%d)", GetLastError()));
            LogFinish();
            return 1;
        }
        LOG(("The service was uninstalled successfully"));
        LogFinish();
        return 0;
    }

    SERVICE_TABLE_ENTRYW DispatchTable[] =
    {
        { SVC_NAME, (LPSERVICE_MAIN_FUNCTIONW) SvcMain },
        { nullptr, nullptr }
    };

    // This call returns when the service has stopped.
    // The process should simply terminate when the call returns.
    if (!StartServiceCtrlDispatcherW(DispatchTable))
    {
        LOG_WARN(("StartServiceCtrlDispatcher failed.  (%d)", GetLastError()));
    }

    return 0;
}

/**
 * Obtains the base path where logs should be stored
 *
 * @param  path The out buffer for the backup log path of size MAX_PATH + 1
 * @return TRUE if successful.
 */
BOOL
GetLogDirectoryPath(WCHAR *path)
{
    HRESULT hr = SHGetFolderPathW(nullptr, CSIDL_COMMON_APPDATA, nullptr,
                                  SHGFP_TYPE_CURRENT, path);
    if (FAILED(hr))
    {
        return FALSE;
    }

    if (!PathAppendSafe(path, L"Mozilla"))
    {
        return FALSE;
    }
    // The directory should already be created from the installer, but
    // just to be safe in case someone deletes.
    CreateDirectoryW(path, nullptr);

    if (!PathAppendSafe(path, L"logs"))
    {
        return FALSE;
    }
    CreateDirectoryW(path, nullptr);
    return TRUE;
}

/**
 * Calculated a backup path based on the log number.
 *
 * @param  path      The out buffer to store the log path of size MAX_PATH + 1
 * @param  basePath  The base directory where the calculated path should go
 * @param  logNumber The log number, 0 == updater.log
 * @return TRUE if successful.
 */
BOOL
GetBackupLogPath(LPWSTR path, LPCWSTR basePath, int logNumber)
{
    WCHAR logName[64] = { L'\0' };
    wcsncpy(path, basePath, sizeof(logName) / sizeof(logName[0]) - 1);
    if (logNumber <= 0)
    {
        swprintf(logName, sizeof(logName) / sizeof(logName[0]),
                 L"maintenanceservice.log");
    }
    else
    {
        swprintf(logName, sizeof(logName) / sizeof(logName[0]),
                 L"maintenanceservice-%d.log", logNumber);
    }
    return PathAppendSafe(path, logName);
}

/**
 * Moves the old log files out of the way before a new one is written.
 * If you for example keep 3 logs, then this function will do:
 *   updater2.log -> updater3.log
 *   updater1.log -> updater2.log
 *   updater.log -> updater1.log
 * Which clears room for a new updater.log in the basePath directory
 *
 * @param basePath      The base directory path where log files are stored
 * @param numLogsToKeep The number of logs to keep
 */
void
BackupOldLogs(LPCWSTR basePath, int numLogsToKeep)
{
    WCHAR oldPath[MAX_PATH + 1];
    WCHAR newPath[MAX_PATH + 1];
    for (int i = numLogsToKeep; i >= 1; i--)
    {
        if (!GetBackupLogPath(oldPath, basePath, i -1))
        {
            continue;
        }

        if (!GetBackupLogPath(newPath, basePath, i))
        {
            continue;
        }

        if (!MoveFileExW(oldPath, newPath, MOVEFILE_REPLACE_EXISTING))
        {
            continue;
        }
    }
}

/**
 * Ensures the service is shutdown once all work is complete.
 * There is an issue on XP SP2 and below where the service can hang
 * in a stop pending state even though the SCM is notified of a stopped
 * state.  Control *should* be returned to StartServiceCtrlDispatcher from the
 * call to SetServiceStatus on a stopped state in the wmain thread.
 * Sometimes this is not the case though. This thread will terminate the process
 * if it has been 5 seconds after all work is done and the process is still not
 * terminated.  This thread is only started once a stopped state was sent to the
 * SCM. The stop pending hang can be reproduced intermittently even if you set
 * a stopped state directly and never set a stop pending state. It is safe to
 * forcefully terminate the process ourselves since all work is done once we
 * start this thread.
*/
DWORD WINAPI
EnsureProcessTerminatedThread(LPVOID)
{
    Sleep(5000);
    exit(0);
}

void
StartTerminationThread()
{
    // If the process does not self terminate like it should, this thread
    // will terminate the process after 5 seconds.
    HANDLE thread = CreateThread(nullptr, 0, EnsureProcessTerminatedThread,
                                 nullptr, 0, nullptr);
    if (thread)
    {
        CloseHandle(thread);
    }
}

/**
 * Main entry point when running as a service.
 */
void WINAPI
SvcMain(DWORD argc, LPWSTR *argv)
{
    // Setup logging, and backup the old logs
    WCHAR updatePath[MAX_PATH + 1];
    if (GetLogDirectoryPath(updatePath))
    {
        BackupOldLogs(updatePath, LOGS_TO_KEEP);
        LogInit(updatePath, L"maintenanceservice.log");
    }

    // Disable every privilege we don't need. Processes started using
    // CreateProcess will use the same token as this process.
    UACHelper::DisablePrivileges(nullptr);

    // Register the handler function for the service
    gSvcStatusHandle = RegisterServiceCtrlHandlerW(SVC_NAME, SvcCtrlHandler);
    if (!gSvcStatusHandle)
    {
        LOG_WARN(("RegisterServiceCtrlHandler failed.  (%d)", GetLastError()));
        ExecuteServiceCommand(argc, argv);
        LogFinish();
        exit(1);
    }

    // These values will be re-used later in calls involving gSvcStatus
    gSvcStatus.dwServiceType = SERVICE_WIN32_OWN_PROCESS;
    gSvcStatus.dwServiceSpecificExitCode = 0;

    // Report initial status to the SCM
    ReportSvcStatus(SERVICE_START_PENDING, NO_ERROR, 3000);

    // This event will be used to tell the SvcCtrlHandler when the work is
    // done for when a stop command is manually issued.
    gWorkDoneEvent = CreateEvent(nullptr, TRUE, FALSE, nullptr);
    if (!gWorkDoneEvent)
    {
        ReportSvcStatus(SERVICE_STOPPED, 1, 0);
        StartTerminationThread();
        return;
    }

    // Initialization complete and we're about to start working on
    // the actual command.  Report the service state as running to the SCM.
    ReportSvcStatus(SERVICE_RUNNING, NO_ERROR, 0);

    // The service command was executed, stop logging and set an event
    // to indicate the work is done in case someone is waiting on a
    // service stop operation.
    ExecuteServiceCommand(argc, argv);
    LogFinish();

    SetEvent(gWorkDoneEvent);

    // If we aren't already in a stopping state then tell the SCM we're stopped
    // now.  If we are already in a stopping state then the SERVICE_STOPPED state
    // will be set by the SvcCtrlHandler.
    if (!gServiceControlStopping)
    {
        ReportSvcStatus(SERVICE_STOPPED, NO_ERROR, 0);
        StartTerminationThread();
    }
}

/**
 * Sets the current service status and reports it to the SCM.
 *
 * @param currentState  The current state (see SERVICE_STATUS)
 * @param exitCode      The system error code
 * @param waitHint      Estimated time for pending operation in milliseconds
 */
void
ReportSvcStatus(DWORD currentState,
                DWORD exitCode,
                DWORD waitHint)
{
    static DWORD dwCheckPoint = 1;

    gSvcStatus.dwCurrentState = currentState;
    gSvcStatus.dwWin32ExitCode = exitCode;
    gSvcStatus.dwWaitHint = waitHint;

    if (SERVICE_START_PENDING == currentState ||
            SERVICE_STOP_PENDING == currentState)
    {
        gSvcStatus.dwControlsAccepted = 0;
    }
    else
    {
        gSvcStatus.dwControlsAccepted = SERVICE_ACCEPT_STOP |
                                        SERVICE_ACCEPT_SHUTDOWN;
    }

    if ((SERVICE_RUNNING == currentState) ||
            (SERVICE_STOPPED == currentState))
    {
        gSvcStatus.dwCheckPoint = 0;
    }
    else
    {
        gSvcStatus.dwCheckPoint = dwCheckPoint++;
    }

    // Report the status of the service to the SCM.
    SetServiceStatus(gSvcStatusHandle, &gSvcStatus);
}

/**
 * Since the SvcCtrlHandler should only spend at most 30 seconds before
 * returning, this function does the service stop work for the SvcCtrlHandler.
*/
DWORD WINAPI
StopServiceAndWaitForCommandThread(LPVOID)
{
    do
    {
        ReportSvcStatus(SERVICE_STOP_PENDING, NO_ERROR, 1000);
    }
    while (WaitForSingleObject(gWorkDoneEvent, 100) == WAIT_TIMEOUT);
    CloseHandle(gWorkDoneEvent);
    gWorkDoneEvent = nullptr;
    ReportSvcStatus(SERVICE_STOPPED, NO_ERROR, 0);
    StartTerminationThread();
    return 0;
}

/**
 * Called by SCM whenever a control code is sent to the service
 * using the ControlService function.
 */
void WINAPI
SvcCtrlHandler(DWORD dwCtrl)
{
    // After a SERVICE_CONTROL_STOP there should be no more commands sent to
    // the SvcCtrlHandler.
    if (gServiceControlStopping)
    {
        return;
    }

    // Handle the requested control code.
    switch (dwCtrl)
    {
        case SERVICE_CONTROL_SHUTDOWN:
        case SERVICE_CONTROL_STOP:
        {
            gServiceControlStopping = true;
            ReportSvcStatus(SERVICE_STOP_PENDING, NO_ERROR, 1000);

            // The SvcCtrlHandler thread should not spend more than 30 seconds in
            // shutdown so we spawn a new thread for stopping the service
            HANDLE thread = CreateThread(nullptr, 0,
                                         StopServiceAndWaitForCommandThread,
                                         nullptr, 0, nullptr);
            if (thread)
            {
                CloseHandle(thread);
            }
            else
            {
                // Couldn't start the thread so just call the stop ourselves.
                // If it happens to take longer than 30 seconds the caller will
                // get an error.
                StopServiceAndWaitForCommandThread(nullptr);
            }
        }
        break;
        default:
            break;
    }
}