Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

2 files changed, 159 insertions, 0 deletions

diff --git a/Documentation/ABI/testing/sysfs-class-devfreq b/Documentation/ABI/testing/sysfs-class-devfreq
new file mode 100644
index 000000000..1e7e0bb4c
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-devfreq
@@ -0,0 +1,134 @@
+What:		/sys/class/devfreq/.../
+Date:		September 2011
+Contact:	MyungJoo Ham <myungjoo.ham@samsung.com>
+Description:
+		Provide a place in sysfs for the devfreq objects.
+		This allows accessing various devfreq specific variables.
+		The name of devfreq object denoted as ... is same as the
+		name of device using devfreq.
+
+What:		/sys/class/devfreq/.../name
+Date:		November 2019
+Contact:	Chanwoo Choi <cw00.choi@samsung.com>
+Description:
+		The /sys/class/devfreq/.../name shows the name of device
+		of the corresponding devfreq object.
+
+What:		/sys/class/devfreq/.../governor
+Date:		September 2011
+Contact:	MyungJoo Ham <myungjoo.ham@samsung.com>
+Description:
+		The /sys/class/devfreq/.../governor show or set the name of the
+		governor used by the corresponding devfreq object.
+
+What:		/sys/class/devfreq/.../cur_freq
+Date:		September 2011
+Contact:	MyungJoo Ham <myungjoo.ham@samsung.com>
+Description:
+		The /sys/class/devfreq/.../cur_freq shows the current
+		frequency of the corresponding devfreq object. Same as
+		target_freq when get_cur_freq() is not implemented by
+		devfreq driver.
+
+What:		/sys/class/devfreq/.../target_freq
+Date:		September 2012
+Contact:	Rajagopal Venkat <rajagopal.venkat@linaro.org>
+Description:
+		The /sys/class/devfreq/.../target_freq shows the next governor
+		predicted target frequency of the corresponding devfreq object.
+
+What:		/sys/class/devfreq/.../trans_stat
+Date:		October 2012
+Contact:	MyungJoo Ham <myungjoo.ham@samsung.com>
+Description:
+		This ABI shows or clears the statistics of devfreq behavior
+		on a specific device. It shows the time spent in each state
+		and the number of transitions between states.
+		In order to activate this ABI, the devfreq target device
+		driver should provide the list of available frequencies
+		with its profile. If need to reset the statistics of devfreq
+		behavior on a specific device, enter 0(zero) to 'trans_stat'
+		as following::
+
+			echo 0 > /sys/class/devfreq/.../trans_stat
+
+		If the transition table is bigger than PAGE_SIZE, reading
+		this will return an -EFBIG error.
+
+What:		/sys/class/devfreq/.../available_frequencies
+Date:		October 2012
+Contact:	Nishanth Menon <nm@ti.com>
+Description:
+		The /sys/class/devfreq/.../available_frequencies shows
+		the available frequencies of the corresponding devfreq object.
+		This is a snapshot of available frequencies and not limited
+		by the min/max frequency restrictions.
+
+What:		/sys/class/devfreq/.../available_governors
+Date:		October 2012
+Contact:	Nishanth Menon <nm@ti.com>
+Description:
+		The /sys/class/devfreq/.../available_governors shows
+		currently available governors in the system.
+
+What:		/sys/class/devfreq/.../min_freq
+Date:		January 2013
+Contact:	MyungJoo Ham <myungjoo.ham@samsung.com>
+Description:
+		The /sys/class/devfreq/.../min_freq shows and stores
+		the minimum frequency requested by users. It is 0 if
+		the user does not care. min_freq overrides the
+		frequency requested by governors.
+
+What:		/sys/class/devfreq/.../max_freq
+Date:		January 2013
+Contact:	MyungJoo Ham <myungjoo.ham@samsung.com>
+Description:
+		The /sys/class/devfreq/.../max_freq shows and stores
+		the maximum frequency requested by users. It is 0 if
+		the user does not care. max_freq overrides the
+		frequency requested by governors and min_freq.
+		The max_freq overrides min_freq because max_freq may be
+		used to throttle devices to avoid overheating.
+
+What:		/sys/class/devfreq/.../polling_interval
+Date:		September 2011
+Contact:	MyungJoo Ham <myungjoo.ham@samsung.com>
+Description:
+		The /sys/class/devfreq/.../polling_interval shows and sets
+		the requested polling interval of the corresponding devfreq
+		object. The values are represented in ms. If the value is
+		less than 1 jiffy, it is considered to be 0, which means
+		no polling. This value is meaningless if the governor is
+		not polling.
+
+		A list of governors that support the node:
+		- simple_ondmenad
+		- tegra_actmon
+
+What:		/sys/class/devfreq/.../userspace/set_freq
+Date:		September 2011
+Contact:	MyungJoo Ham <myungjoo.ham@samsung.com>
+Description:
+		The /sys/class/devfreq/.../userspace/set_freq shows and
+		sets the requested frequency for the devfreq object if
+		userspace governor is in effect.
+
+		A list of governors that support the node:
+		- userspace
+
+What:		/sys/class/devfreq/.../timer
+Date:		July 2020
+Contact:	Chanwoo Choi <cw00.choi@samsung.com>
+Description:
+		This ABI shows and stores the kind of work timer by users.
+		This work timer is used by devfreq workqueue in order to
+		monitor the device status such as utilization. The user
+		can change the work timer on runtime according to their demand
+		as following::
+
+			echo deferrable > /sys/class/devfreq/.../timer
+			echo delayed > /sys/class/devfreq/.../timer
+
+		A list of governors that support the node:
+		- simple_ondemand
diff --git a/Documentation/ABI/testing/sysfs-class-devfreq-event b/Documentation/ABI/testing/sysfs-class-devfreq-event
new file mode 100644
index 000000000..dbe48495e
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-devfreq-event
@@ -0,0 +1,25 @@
+What:		/sys/class/devfreq-event/event<x>/
+Date:		January 2017
+Contact:	Chanwoo Choi <cw00.choi@samsung.com>
+Description:
+		Provide a place in sysfs for the devfreq-event objects.
+		This allows accessing various devfreq-event specific variables.
+		The name of devfreq-event object denoted as 'event<x>' which
+		includes the unique number of 'x' for each devfreq-event object.
+
+What:		/sys/class/devfreq-event/event<x>/name
+Date:		January 2017
+Contact:	Chanwoo Choi <cw00.choi@samsung.com>
+Description:
+		The /sys/class/devfreq-event/event<x>/name attribute contains
+		the name of the devfreq-event object. This attribute is
+		read-only.
+
+What:		/sys/class/devfreq-event/event<x>/enable_count
+Date:		January 2017
+Contact:	Chanwoo Choi <cw00.choi@samsung.com>
+Description:
+		The /sys/class/devfreq-event/event<x>/enable_count attribute
+		contains the reference count to enable the devfreq-event
+		object. If the device is enabled, the value of attribute is
+		greater than zero.