Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 35 insertions, 0 deletions

diff --git a/Documentation/arm/sa1100/cerf.rst b/Documentation/arm/sa1100/cerf.rst
new file mode 100644
index 000000000..7fa71b609
--- /dev/null
+++ b/Documentation/arm/sa1100/cerf.rst
@@ -0,0 +1,35 @@
+==============
+CerfBoard/Cube
+==============
+
+*** The StrongARM version of the CerfBoard/Cube has been discontinued ***
+
+The Intrinsyc CerfBoard is a StrongARM 1110-based computer on a board
+that measures approximately 2" square. It includes an Ethernet
+controller, an RS232-compatible serial port, a USB function port, and
+one CompactFlash+ slot on the back. Pictures can be found at the
+Intrinsyc website, http://www.intrinsyc.com.
+
+This document describes the support in the Linux kernel for the
+Intrinsyc CerfBoard.
+
+Supported in this version
+=========================
+
+   - CompactFlash+ slot (select PCMCIA in General Setup and any options
+     that may be required)
+   - Onboard Crystal CS8900 Ethernet controller (Cerf CS8900A support in
+     Network Devices)
+   - Serial ports with a serial console (hardcoded to 38400 8N1)
+
+In order to get this kernel onto your Cerf, you need a server that runs
+both BOOTP and TFTP. Detailed instructions should have come with your
+evaluation kit on how to use the bootloader. This series of commands
+will suffice::
+
+   make ARCH=arm CROSS_COMPILE=arm-linux- cerfcube_defconfig
+   make ARCH=arm CROSS_COMPILE=arm-linux- zImage
+   make ARCH=arm CROSS_COMPILE=arm-linux- modules
+   cp arch/arm/boot/zImage <TFTP directory>
+
+support@intrinsyc.com