Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

74 files changed, 8068 insertions, 0 deletions

diff --git a/Documentation/arm/arm.rst b/Documentation/arm/arm.rst
new file mode 100644
index 000000000..99d660fdf
--- /dev/null
+++ b/Documentation/arm/arm.rst
@@ -0,0 +1,212 @@
+=======================
+ARM Linux 2.6 and upper
+=======================
+
+    Please check <ftp://ftp.arm.linux.org.uk/pub/armlinux> for
+    updates.
+
+Compilation of kernel
+---------------------
+
+  In order to compile ARM Linux, you will need a compiler capable of
+  generating ARM ELF code with GNU extensions.  GCC 3.3 is known to be
+  a good compiler.  Fortunately, you needn't guess.  The kernel will report
+  an error if your compiler is a recognized offender.
+
+  To build ARM Linux natively, you shouldn't have to alter the ARCH = line
+  in the top level Makefile.  However, if you don't have the ARM Linux ELF
+  tools installed as default, then you should change the CROSS_COMPILE
+  line as detailed below.
+
+  If you wish to cross-compile, then alter the following lines in the top
+  level make file::
+
+    ARCH = <whatever>
+
+  with::
+
+    ARCH = arm
+
+  and::
+
+    CROSS_COMPILE=
+
+  to::
+
+    CROSS_COMPILE=<your-path-to-your-compiler-without-gcc>
+
+  eg.::
+
+    CROSS_COMPILE=arm-linux-
+
+  Do a 'make config', followed by 'make Image' to build the kernel
+  (arch/arm/boot/Image).  A compressed image can be built by doing a
+  'make zImage' instead of 'make Image'.
+
+
+Bug reports etc
+---------------
+
+  Please send patches to the patch system.  For more information, see
+  http://www.arm.linux.org.uk/developer/patches/info.php Always include some
+  explanation as to what the patch does and why it is needed.
+
+  Bug reports should be sent to linux-arm-kernel@lists.arm.linux.org.uk,
+  or submitted through the web form at
+  http://www.arm.linux.org.uk/developer/
+
+  When sending bug reports, please ensure that they contain all relevant
+  information, eg. the kernel messages that were printed before/during
+  the problem, what you were doing, etc.
+
+
+Include files
+-------------
+
+  Several new include directories have been created under include/asm-arm,
+  which are there to reduce the clutter in the top-level directory.  These
+  directories, and their purpose is listed below:
+
+  ============= ==========================================================
+   `arch-*`	machine/platform specific header files
+   `hardware`	driver-internal ARM specific data structures/definitions
+   `mach`	descriptions of generic ARM to specific machine interfaces
+   `proc-*`	processor dependent header files (currently only two
+		categories)
+  ============= ==========================================================
+
+
+Machine/Platform support
+------------------------
+
+  The ARM tree contains support for a lot of different machine types.  To
+  continue supporting these differences, it has become necessary to split
+  machine-specific parts by directory.  For this, the machine category is
+  used to select which directories and files get included (we will use
+  $(MACHINE) to refer to the category)
+
+  To this end, we now have arch/arm/mach-$(MACHINE) directories which are
+  designed to house the non-driver files for a particular machine (eg, PCI,
+  memory management, architecture definitions etc).  For all future
+  machines, there should be a corresponding arch/arm/mach-$(MACHINE)/include/mach
+  directory.
+
+
+Modules
+-------
+
+  Although modularisation is supported (and required for the FP emulator),
+  each module on an ARM2/ARM250/ARM3 machine when is loaded will take
+  memory up to the next 32k boundary due to the size of the pages.
+  Therefore, is modularisation on these machines really worth it?
+
+  However, ARM6 and up machines allow modules to take multiples of 4k, and
+  as such Acorn RiscPCs and other architectures using these processors can
+  make good use of modularisation.
+
+
+ADFS Image files
+----------------
+
+  You can access image files on your ADFS partitions by mounting the ADFS
+  partition, and then using the loopback device driver.  You must have
+  losetup installed.
+
+  Please note that the PCEmulator DOS partitions have a partition table at
+  the start, and as such, you will have to give '-o offset' to losetup.
+
+
+Request to developers
+---------------------
+
+  When writing device drivers which include a separate assembler file, please
+  include it in with the C file, and not the arch/arm/lib directory.  This
+  allows the driver to be compiled as a loadable module without requiring
+  half the code to be compiled into the kernel image.
+
+  In general, try to avoid using assembler unless it is really necessary.  It
+  makes drivers far less easy to port to other hardware.
+
+
+ST506 hard drives
+-----------------
+
+  The ST506 hard drive controllers seem to be working fine (if a little
+  slowly).  At the moment they will only work off the controllers on an
+  A4x0's motherboard, but for it to work off a Podule just requires
+  someone with a podule to add the addresses for the IRQ mask and the
+  HDC base to the source.
+
+  As of 31/3/96 it works with two drives (you should get the ADFS
+  `*configure` harddrive set to 2). I've got an internal 20MB and a great
+  big external 5.25" FH 64MB drive (who could ever want more :-) ).
+
+  I've just got 240K/s off it (a dd with bs=128k); thats about half of what
+  RiscOS gets; but it's a heck of a lot better than the 50K/s I was getting
+  last week :-)
+
+  Known bug: Drive data errors can cause a hang; including cases where
+  the controller has fixed the error using ECC. (Possibly ONLY
+  in that case...hmm).
+
+
+1772 Floppy
+-----------
+  This also seems to work OK, but hasn't been stressed much lately.  It
+  hasn't got any code for disc change detection in there at the moment which
+  could be a bit of a problem!  Suggestions on the correct way to do this
+  are welcome.
+
+
+`CONFIG_MACH_` and `CONFIG_ARCH_`
+---------------------------------
+  A change was made in 2003 to the macro names for new machines.
+  Historically, `CONFIG_ARCH_` was used for the bonafide architecture,
+  e.g. SA1100, as well as implementations of the architecture,
+  e.g. Assabet.  It was decided to change the implementation macros
+  to read `CONFIG_MACH_` for clarity.  Moreover, a retroactive fixup has
+  not been made because it would complicate patching.
+
+  Previous registrations may be found online.
+
+    <http://www.arm.linux.org.uk/developer/machines/>
+
+Kernel entry (head.S)
+---------------------
+  The initial entry into the kernel is via head.S, which uses machine
+  independent code.  The machine is selected by the value of 'r1' on
+  entry, which must be kept unique.
+
+  Due to the large number of machines which the ARM port of Linux provides
+  for, we have a method to manage this which ensures that we don't end up
+  duplicating large amounts of code.
+
+  We group machine (or platform) support code into machine classes.  A
+  class typically based around one or more system on a chip devices, and
+  acts as a natural container around the actual implementations.  These
+  classes are given directories - arch/arm/mach-<class> - which contain
+  the source files and include/mach/ to support the machine class.
+
+  For example, the SA1100 class is based upon the SA1100 and SA1110 SoC
+  devices, and contains the code to support the way the on-board and off-
+  board devices are used, or the device is setup, and provides that
+  machine specific "personality."
+
+  For platforms that support device tree (DT), the machine selection is
+  controlled at runtime by passing the device tree blob to the kernel.  At
+  compile-time, support for the machine type must be selected.  This allows for
+  a single multiplatform kernel build to be used for several machine types.
+
+  For platforms that do not use device tree, this machine selection is
+  controlled by the machine type ID, which acts both as a run-time and a
+  compile-time code selection method.  You can register a new machine via the
+  web site at:
+
+    <http://www.arm.linux.org.uk/developer/machines/>
+
+  Note: Please do not register a machine type for DT-only platforms.  If your
+  platform is DT-only, you do not need a registered machine type.
+
+---
+
+Russell King (15/03/2004)
diff --git a/Documentation/arm/booting.rst b/Documentation/arm/booting.rst
new file mode 100644
index 000000000..5974e37b3
--- /dev/null
+++ b/Documentation/arm/booting.rst
@@ -0,0 +1,237 @@
+=================
+Booting ARM Linux
+=================
+
+Author:	Russell King
+
+Date  : 18 May 2002
+
+The following documentation is relevant to 2.4.18-rmk6 and beyond.
+
+In order to boot ARM Linux, you require a boot loader, which is a small
+program that runs before the main kernel.  The boot loader is expected
+to initialise various devices, and eventually call the Linux kernel,
+passing information to the kernel.
+
+Essentially, the boot loader should provide (as a minimum) the
+following:
+
+1. Setup and initialise the RAM.
+2. Initialise one serial port.
+3. Detect the machine type.
+4. Setup the kernel tagged list.
+5. Load initramfs.
+6. Call the kernel image.
+
+
+1. Setup and initialise RAM
+---------------------------
+
+Existing boot loaders:
+	MANDATORY
+New boot loaders:
+	MANDATORY
+
+The boot loader is expected to find and initialise all RAM that the
+kernel will use for volatile data storage in the system.  It performs
+this in a machine dependent manner.  (It may use internal algorithms
+to automatically locate and size all RAM, or it may use knowledge of
+the RAM in the machine, or any other method the boot loader designer
+sees fit.)
+
+
+2. Initialise one serial port
+-----------------------------
+
+Existing boot loaders:
+	OPTIONAL, RECOMMENDED
+New boot loaders:
+	OPTIONAL, RECOMMENDED
+
+The boot loader should initialise and enable one serial port on the
+target.  This allows the kernel serial driver to automatically detect
+which serial port it should use for the kernel console (generally
+used for debugging purposes, or communication with the target.)
+
+As an alternative, the boot loader can pass the relevant 'console='
+option to the kernel via the tagged lists specifying the port, and
+serial format options as described in
+
+       Documentation/admin-guide/kernel-parameters.rst.
+
+
+3. Detect the machine type
+--------------------------
+
+Existing boot loaders:
+	OPTIONAL
+New boot loaders:
+	MANDATORY except for DT-only platforms
+
+The boot loader should detect the machine type its running on by some
+method.  Whether this is a hard coded value or some algorithm that
+looks at the connected hardware is beyond the scope of this document.
+The boot loader must ultimately be able to provide a MACH_TYPE_xxx
+value to the kernel. (see linux/arch/arm/tools/mach-types).  This
+should be passed to the kernel in register r1.
+
+For DT-only platforms, the machine type will be determined by device
+tree.  set the machine type to all ones (~0).  This is not strictly
+necessary, but assures that it will not match any existing types.
+
+4. Setup boot data
+------------------
+
+Existing boot loaders:
+	OPTIONAL, HIGHLY RECOMMENDED
+New boot loaders:
+	MANDATORY
+
+The boot loader must provide either a tagged list or a dtb image for
+passing configuration data to the kernel.  The physical address of the
+boot data is passed to the kernel in register r2.
+
+4a. Setup the kernel tagged list
+--------------------------------
+
+The boot loader must create and initialise the kernel tagged list.
+A valid tagged list starts with ATAG_CORE and ends with ATAG_NONE.
+The ATAG_CORE tag may or may not be empty.  An empty ATAG_CORE tag
+has the size field set to '2' (0x00000002).  The ATAG_NONE must set
+the size field to zero.
+
+Any number of tags can be placed in the list.  It is undefined
+whether a repeated tag appends to the information carried by the
+previous tag, or whether it replaces the information in its
+entirety; some tags behave as the former, others the latter.
+
+The boot loader must pass at a minimum the size and location of
+the system memory, and root filesystem location.  Therefore, the
+minimum tagged list should look::
+
+		+-----------+
+  base ->	| ATAG_CORE |  |
+		+-----------+  |
+		| ATAG_MEM  |  | increasing address
+		+-----------+  |
+		| ATAG_NONE |  |
+		+-----------+  v
+
+The tagged list should be stored in system RAM.
+
+The tagged list must be placed in a region of memory where neither
+the kernel decompressor nor initrd 'bootp' program will overwrite
+it.  The recommended placement is in the first 16KiB of RAM.
+
+4b. Setup the device tree
+-------------------------
+
+The boot loader must load a device tree image (dtb) into system ram
+at a 64bit aligned address and initialize it with the boot data.  The
+dtb format is documented at https://www.devicetree.org/specifications/.
+The kernel will look for the dtb magic value of 0xd00dfeed at the dtb
+physical address to determine if a dtb has been passed instead of a
+tagged list.
+
+The boot loader must pass at a minimum the size and location of the
+system memory, and the root filesystem location.  The dtb must be
+placed in a region of memory where the kernel decompressor will not
+overwrite it, while remaining within the region which will be covered
+by the kernel's low-memory mapping.
+
+A safe location is just above the 128MiB boundary from start of RAM.
+
+5. Load initramfs.
+------------------
+
+Existing boot loaders:
+	OPTIONAL
+New boot loaders:
+	OPTIONAL
+
+If an initramfs is in use then, as with the dtb, it must be placed in
+a region of memory where the kernel decompressor will not overwrite it
+while also with the region which will be covered by the kernel's
+low-memory mapping.
+
+A safe location is just above the device tree blob which itself will
+be loaded just above the 128MiB boundary from the start of RAM as
+recommended above.
+
+6. Calling the kernel image
+---------------------------
+
+Existing boot loaders:
+	MANDATORY
+New boot loaders:
+	MANDATORY
+
+There are two options for calling the kernel zImage.  If the zImage
+is stored in flash, and is linked correctly to be run from flash,
+then it is legal for the boot loader to call the zImage in flash
+directly.
+
+The zImage may also be placed in system RAM and called there.  The
+kernel should be placed in the first 128MiB of RAM.  It is recommended
+that it is loaded above 32MiB in order to avoid the need to relocate
+prior to decompression, which will make the boot process slightly
+faster.
+
+When booting a raw (non-zImage) kernel the constraints are tighter.
+In this case the kernel must be loaded at an offset into system equal
+to TEXT_OFFSET - PAGE_OFFSET.
+
+In any case, the following conditions must be met:
+
+- Quiesce all DMA capable devices so that memory does not get
+  corrupted by bogus network packets or disk data. This will save
+  you many hours of debug.
+
+- CPU register settings
+
+  - r0 = 0,
+  - r1 = machine type number discovered in (3) above.
+  - r2 = physical address of tagged list in system RAM, or
+    physical address of device tree block (dtb) in system RAM
+
+- CPU mode
+
+  All forms of interrupts must be disabled (IRQs and FIQs)
+
+  For CPUs which do not include the ARM virtualization extensions, the
+  CPU must be in SVC mode.  (A special exception exists for Angel)
+
+  CPUs which include support for the virtualization extensions can be
+  entered in HYP mode in order to enable the kernel to make full use of
+  these extensions.  This is the recommended boot method for such CPUs,
+  unless the virtualisations are already in use by a pre-installed
+  hypervisor.
+
+  If the kernel is not entered in HYP mode for any reason, it must be
+  entered in SVC mode.
+
+- Caches, MMUs
+
+  The MMU must be off.
+
+  Instruction cache may be on or off.
+
+  Data cache must be off.
+
+  If the kernel is entered in HYP mode, the above requirements apply to
+  the HYP mode configuration in addition to the ordinary PL1 (privileged
+  kernel modes) configuration.  In addition, all traps into the
+  hypervisor must be disabled, and PL1 access must be granted for all
+  peripherals and CPU resources for which this is architecturally
+  possible.  Except for entering in HYP mode, the system configuration
+  should be such that a kernel which does not include support for the
+  virtualization extensions can boot correctly without extra help.
+
+- The boot loader is expected to call the kernel image by jumping
+  directly to the first instruction of the kernel image.
+
+  On CPUs supporting the ARM instruction set, the entry must be
+  made in ARM state, even for a Thumb-2 kernel.
+
+  On CPUs supporting only the Thumb instruction set such as
+  Cortex-M class CPUs, the entry must be made in Thumb state.
diff --git a/Documentation/arm/cluster-pm-race-avoidance.rst b/Documentation/arm/cluster-pm-race-avoidance.rst
new file mode 100644
index 000000000..aa58603d3
--- /dev/null
+++ b/Documentation/arm/cluster-pm-race-avoidance.rst
@@ -0,0 +1,533 @@
+=========================================================
+Cluster-wide Power-up/power-down race avoidance algorithm
+=========================================================
+
+This file documents the algorithm which is used to coordinate CPU and
+cluster setup and teardown operations and to manage hardware coherency
+controls safely.
+
+The section "Rationale" explains what the algorithm is for and why it is
+needed.  "Basic model" explains general concepts using a simplified view
+of the system.  The other sections explain the actual details of the
+algorithm in use.
+
+
+Rationale
+---------
+
+In a system containing multiple CPUs, it is desirable to have the
+ability to turn off individual CPUs when the system is idle, reducing
+power consumption and thermal dissipation.
+
+In a system containing multiple clusters of CPUs, it is also desirable
+to have the ability to turn off entire clusters.
+
+Turning entire clusters off and on is a risky business, because it
+involves performing potentially destructive operations affecting a group
+of independently running CPUs, while the OS continues to run.  This
+means that we need some coordination in order to ensure that critical
+cluster-level operations are only performed when it is truly safe to do
+so.
+
+Simple locking may not be sufficient to solve this problem, because
+mechanisms like Linux spinlocks may rely on coherency mechanisms which
+are not immediately enabled when a cluster powers up.  Since enabling or
+disabling those mechanisms may itself be a non-atomic operation (such as
+writing some hardware registers and invalidating large caches), other
+methods of coordination are required in order to guarantee safe
+power-down and power-up at the cluster level.
+
+The mechanism presented in this document describes a coherent memory
+based protocol for performing the needed coordination.  It aims to be as
+lightweight as possible, while providing the required safety properties.
+
+
+Basic model
+-----------
+
+Each cluster and CPU is assigned a state, as follows:
+
+	- DOWN
+	- COMING_UP
+	- UP
+	- GOING_DOWN
+
+::
+
+	    +---------> UP ----------+
+	    |                        v
+
+	COMING_UP                GOING_DOWN
+
+	    ^                        |
+	    +--------- DOWN <--------+
+
+
+DOWN:
+	The CPU or cluster is not coherent, and is either powered off or
+	suspended, or is ready to be powered off or suspended.
+
+COMING_UP:
+	The CPU or cluster has committed to moving to the UP state.
+	It may be part way through the process of initialisation and
+	enabling coherency.
+
+UP:
+	The CPU or cluster is active and coherent at the hardware
+	level.  A CPU in this state is not necessarily being used
+	actively by the kernel.
+
+GOING_DOWN:
+	The CPU or cluster has committed to moving to the DOWN
+	state.  It may be part way through the process of teardown and
+	coherency exit.
+
+
+Each CPU has one of these states assigned to it at any point in time.
+The CPU states are described in the "CPU state" section, below.
+
+Each cluster is also assigned a state, but it is necessary to split the
+state value into two parts (the "cluster" state and "inbound" state) and
+to introduce additional states in order to avoid races between different
+CPUs in the cluster simultaneously modifying the state.  The cluster-
+level states are described in the "Cluster state" section.
+
+To help distinguish the CPU states from cluster states in this
+discussion, the state names are given a `CPU_` prefix for the CPU states,
+and a `CLUSTER_` or `INBOUND_` prefix for the cluster states.
+
+
+CPU state
+---------
+
+In this algorithm, each individual core in a multi-core processor is
+referred to as a "CPU".  CPUs are assumed to be single-threaded:
+therefore, a CPU can only be doing one thing at a single point in time.
+
+This means that CPUs fit the basic model closely.
+
+The algorithm defines the following states for each CPU in the system:
+
+	- CPU_DOWN
+	- CPU_COMING_UP
+	- CPU_UP
+	- CPU_GOING_DOWN
+
+::
+
+	 cluster setup and
+	CPU setup complete          policy decision
+	      +-----------> CPU_UP ------------+
+	      |                                v
+
+	CPU_COMING_UP                   CPU_GOING_DOWN
+
+	      ^                                |
+	      +----------- CPU_DOWN <----------+
+	 policy decision           CPU teardown complete
+	or hardware event
+
+
+The definitions of the four states correspond closely to the states of
+the basic model.
+
+Transitions between states occur as follows.
+
+A trigger event (spontaneous) means that the CPU can transition to the
+next state as a result of making local progress only, with no
+requirement for any external event to happen.
+
+
+CPU_DOWN:
+	A CPU reaches the CPU_DOWN state when it is ready for
+	power-down.  On reaching this state, the CPU will typically
+	power itself down or suspend itself, via a WFI instruction or a
+	firmware call.
+
+	Next state:
+		CPU_COMING_UP
+	Conditions:
+		none
+
+	Trigger events:
+		a) an explicit hardware power-up operation, resulting
+		   from a policy decision on another CPU;
+
+		b) a hardware event, such as an interrupt.
+
+
+CPU_COMING_UP:
+	A CPU cannot start participating in hardware coherency until the
+	cluster is set up and coherent.  If the cluster is not ready,
+	then the CPU will wait in the CPU_COMING_UP state until the
+	cluster has been set up.
+
+	Next state:
+		CPU_UP
+	Conditions:
+		The CPU's parent cluster must be in CLUSTER_UP.
+	Trigger events:
+		Transition of the parent cluster to CLUSTER_UP.
+
+	Refer to the "Cluster state" section for a description of the
+	CLUSTER_UP state.
+
+
+CPU_UP:
+	When a CPU reaches the CPU_UP state, it is safe for the CPU to
+	start participating in local coherency.
+
+	This is done by jumping to the kernel's CPU resume code.
+
+	Note that the definition of this state is slightly different
+	from the basic model definition: CPU_UP does not mean that the
+	CPU is coherent yet, but it does mean that it is safe to resume
+	the kernel.  The kernel handles the rest of the resume
+	procedure, so the remaining steps are not visible as part of the
+	race avoidance algorithm.
+
+	The CPU remains in this state until an explicit policy decision
+	is made to shut down or suspend the CPU.
+
+	Next state:
+		CPU_GOING_DOWN
+	Conditions:
+		none
+	Trigger events:
+		explicit policy decision
+
+
+CPU_GOING_DOWN:
+	While in this state, the CPU exits coherency, including any
+	operations required to achieve this (such as cleaning data
+	caches).
+
+	Next state:
+		CPU_DOWN
+	Conditions:
+		local CPU teardown complete
+	Trigger events:
+		(spontaneous)
+
+
+Cluster state
+-------------
+
+A cluster is a group of connected CPUs with some common resources.
+Because a cluster contains multiple CPUs, it can be doing multiple
+things at the same time.  This has some implications.  In particular, a
+CPU can start up while another CPU is tearing the cluster down.
+
+In this discussion, the "outbound side" is the view of the cluster state
+as seen by a CPU tearing the cluster down.  The "inbound side" is the
+view of the cluster state as seen by a CPU setting the CPU up.
+
+In order to enable safe coordination in such situations, it is important
+that a CPU which is setting up the cluster can advertise its state
+independently of the CPU which is tearing down the cluster.  For this
+reason, the cluster state is split into two parts:
+
+	"cluster" state: The global state of the cluster; or the state
+	on the outbound side:
+
+		- CLUSTER_DOWN
+		- CLUSTER_UP
+		- CLUSTER_GOING_DOWN
+
+	"inbound" state: The state of the cluster on the inbound side.
+
+		- INBOUND_NOT_COMING_UP
+		- INBOUND_COMING_UP
+
+
+	The different pairings of these states results in six possible
+	states for the cluster as a whole::
+
+	                            CLUSTER_UP
+	          +==========> INBOUND_NOT_COMING_UP -------------+
+	          #                                               |
+	                                                          |
+	     CLUSTER_UP     <----+                                |
+	  INBOUND_COMING_UP      |                                v
+
+	          ^             CLUSTER_GOING_DOWN       CLUSTER_GOING_DOWN
+	          #              INBOUND_COMING_UP <=== INBOUND_NOT_COMING_UP
+
+	    CLUSTER_DOWN         |                                |
+	  INBOUND_COMING_UP <----+                                |
+	                                                          |
+	          ^                                               |
+	          +===========     CLUSTER_DOWN      <------------+
+	                       INBOUND_NOT_COMING_UP
+
+	Transitions -----> can only be made by the outbound CPU, and
+	only involve changes to the "cluster" state.
+
+	Transitions ===##> can only be made by the inbound CPU, and only
+	involve changes to the "inbound" state, except where there is no
+	further transition possible on the outbound side (i.e., the
+	outbound CPU has put the cluster into the CLUSTER_DOWN state).
+
+	The race avoidance algorithm does not provide a way to determine
+	which exact CPUs within the cluster play these roles.  This must
+	be decided in advance by some other means.  Refer to the section
+	"Last man and first man selection" for more explanation.
+
+
+	CLUSTER_DOWN/INBOUND_NOT_COMING_UP is the only state where the
+	cluster can actually be powered down.
+
+	The parallelism of the inbound and outbound CPUs is observed by
+	the existence of two different paths from CLUSTER_GOING_DOWN/
+	INBOUND_NOT_COMING_UP (corresponding to GOING_DOWN in the basic
+	model) to CLUSTER_DOWN/INBOUND_COMING_UP (corresponding to
+	COMING_UP in the basic model).  The second path avoids cluster
+	teardown completely.
+
+	CLUSTER_UP/INBOUND_COMING_UP is equivalent to UP in the basic
+	model.  The final transition to CLUSTER_UP/INBOUND_NOT_COMING_UP
+	is trivial and merely resets the state machine ready for the
+	next cycle.
+
+	Details of the allowable transitions follow.
+
+	The next state in each case is notated
+
+		<cluster state>/<inbound state> (<transitioner>)
+
+	where the <transitioner> is the side on which the transition
+	can occur; either the inbound or the outbound side.
+
+
+CLUSTER_DOWN/INBOUND_NOT_COMING_UP:
+	Next state:
+		CLUSTER_DOWN/INBOUND_COMING_UP (inbound)
+	Conditions:
+		none
+
+	Trigger events:
+		a) an explicit hardware power-up operation, resulting
+		   from a policy decision on another CPU;
+
+		b) a hardware event, such as an interrupt.
+
+
+CLUSTER_DOWN/INBOUND_COMING_UP:
+
+	In this state, an inbound CPU sets up the cluster, including
+	enabling of hardware coherency at the cluster level and any
+	other operations (such as cache invalidation) which are required
+	in order to achieve this.
+
+	The purpose of this state is to do sufficient cluster-level
+	setup to enable other CPUs in the cluster to enter coherency
+	safely.
+
+	Next state:
+		CLUSTER_UP/INBOUND_COMING_UP (inbound)
+	Conditions:
+		cluster-level setup and hardware coherency complete
+	Trigger events:
+		(spontaneous)
+
+
+CLUSTER_UP/INBOUND_COMING_UP:
+
+	Cluster-level setup is complete and hardware coherency is
+	enabled for the cluster.  Other CPUs in the cluster can safely
+	enter coherency.
+
+	This is a transient state, leading immediately to
+	CLUSTER_UP/INBOUND_NOT_COMING_UP.  All other CPUs on the cluster
+	should consider treat these two states as equivalent.
+
+	Next state:
+		CLUSTER_UP/INBOUND_NOT_COMING_UP (inbound)
+	Conditions:
+		none
+	Trigger events:
+		(spontaneous)
+
+
+CLUSTER_UP/INBOUND_NOT_COMING_UP:
+
+	Cluster-level setup is complete and hardware coherency is
+	enabled for the cluster.  Other CPUs in the cluster can safely
+	enter coherency.
+
+	The cluster will remain in this state until a policy decision is
+	made to power the cluster down.
+
+	Next state:
+		CLUSTER_GOING_DOWN/INBOUND_NOT_COMING_UP (outbound)
+	Conditions:
+		none
+	Trigger events:
+		policy decision to power down the cluster
+
+
+CLUSTER_GOING_DOWN/INBOUND_NOT_COMING_UP:
+
+	An outbound CPU is tearing the cluster down.  The selected CPU
+	must wait in this state until all CPUs in the cluster are in the
+	CPU_DOWN state.
+
+	When all CPUs are in the CPU_DOWN state, the cluster can be torn
+	down, for example by cleaning data caches and exiting
+	cluster-level coherency.
+
+	To avoid wasteful unnecessary teardown operations, the outbound
+	should check the inbound cluster state for asynchronous
+	transitions to INBOUND_COMING_UP.  Alternatively, individual
+	CPUs can be checked for entry into CPU_COMING_UP or CPU_UP.
+
+
+	Next states:
+
+	CLUSTER_DOWN/INBOUND_NOT_COMING_UP (outbound)
+		Conditions:
+			cluster torn down and ready to power off
+		Trigger events:
+			(spontaneous)
+
+	CLUSTER_GOING_DOWN/INBOUND_COMING_UP (inbound)
+		Conditions:
+			none
+
+		Trigger events:
+			a) an explicit hardware power-up operation,
+			   resulting from a policy decision on another
+			   CPU;
+
+			b) a hardware event, such as an interrupt.
+
+
+CLUSTER_GOING_DOWN/INBOUND_COMING_UP:
+
+	The cluster is (or was) being torn down, but another CPU has
+	come online in the meantime and is trying to set up the cluster
+	again.
+
+	If the outbound CPU observes this state, it has two choices:
+
+		a) back out of teardown, restoring the cluster to the
+		   CLUSTER_UP state;
+
+		b) finish tearing the cluster down and put the cluster
+		   in the CLUSTER_DOWN state; the inbound CPU will
+		   set up the cluster again from there.
+
+	Choice (a) permits the removal of some latency by avoiding
+	unnecessary teardown and setup operations in situations where
+	the cluster is not really going to be powered down.
+
+
+	Next states:
+
+	CLUSTER_UP/INBOUND_COMING_UP (outbound)
+		Conditions:
+				cluster-level setup and hardware
+				coherency complete
+
+		Trigger events:
+				(spontaneous)
+
+	CLUSTER_DOWN/INBOUND_COMING_UP (outbound)
+		Conditions:
+			cluster torn down and ready to power off
+
+		Trigger events:
+			(spontaneous)
+
+
+Last man and First man selection
+--------------------------------
+
+The CPU which performs cluster tear-down operations on the outbound side
+is commonly referred to as the "last man".
+
+The CPU which performs cluster setup on the inbound side is commonly
+referred to as the "first man".
+
+The race avoidance algorithm documented above does not provide a
+mechanism to choose which CPUs should play these roles.
+
+
+Last man:
+
+When shutting down the cluster, all the CPUs involved are initially
+executing Linux and hence coherent.  Therefore, ordinary spinlocks can
+be used to select a last man safely, before the CPUs become
+non-coherent.
+
+
+First man:
+
+Because CPUs may power up asynchronously in response to external wake-up
+events, a dynamic mechanism is needed to make sure that only one CPU
+attempts to play the first man role and do the cluster-level
+initialisation: any other CPUs must wait for this to complete before
+proceeding.
+
+Cluster-level initialisation may involve actions such as configuring
+coherency controls in the bus fabric.
+
+The current implementation in mcpm_head.S uses a separate mutual exclusion
+mechanism to do this arbitration.  This mechanism is documented in
+detail in vlocks.txt.
+
+
+Features and Limitations
+------------------------
+
+Implementation:
+
+	The current ARM-based implementation is split between
+	arch/arm/common/mcpm_head.S (low-level inbound CPU operations) and
+	arch/arm/common/mcpm_entry.c (everything else):
+
+	__mcpm_cpu_going_down() signals the transition of a CPU to the
+	CPU_GOING_DOWN state.
+
+	__mcpm_cpu_down() signals the transition of a CPU to the CPU_DOWN
+	state.
+
+	A CPU transitions to CPU_COMING_UP and then to CPU_UP via the
+	low-level power-up code in mcpm_head.S.  This could
+	involve CPU-specific setup code, but in the current
+	implementation it does not.
+
+	__mcpm_outbound_enter_critical() and __mcpm_outbound_leave_critical()
+	handle transitions from CLUSTER_UP to CLUSTER_GOING_DOWN
+	and from there to CLUSTER_DOWN or back to CLUSTER_UP (in
+	the case of an aborted cluster power-down).
+
+	These functions are more complex than the __mcpm_cpu_*()
+	functions due to the extra inter-CPU coordination which
+	is needed for safe transitions at the cluster level.
+
+	A cluster transitions from CLUSTER_DOWN back to CLUSTER_UP via
+	the low-level power-up code in mcpm_head.S.  This
+	typically involves platform-specific setup code,
+	provided by the platform-specific power_up_setup
+	function registered via mcpm_sync_init.
+
+Deep topologies:
+
+	As currently described and implemented, the algorithm does not
+	support CPU topologies involving more than two levels (i.e.,
+	clusters of clusters are not supported).  The algorithm could be
+	extended by replicating the cluster-level states for the
+	additional topological levels, and modifying the transition
+	rules for the intermediate (non-outermost) cluster levels.
+
+
+Colophon
+--------
+
+Originally created and documented by Dave Martin for Linaro Limited, in
+collaboration with Nicolas Pitre and Achin Gupta.
+
+Copyright (C) 2012-2013  Linaro Limited
+Distributed under the terms of Version 2 of the GNU General Public
+License, as defined in linux/COPYING.
diff --git a/Documentation/arm/features.rst b/Documentation/arm/features.rst
new file mode 100644
index 000000000..7414ec03d
--- /dev/null
+++ b/Documentation/arm/features.rst
@@ -0,0 +1,3 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. kernel-feat:: $srctree/Documentation/features arm
diff --git a/Documentation/arm/firmware.rst b/Documentation/arm/firmware.rst
new file mode 100644
index 000000000..efd844bae
--- /dev/null
+++ b/Documentation/arm/firmware.rst
@@ -0,0 +1,72 @@
+==========================================================================
+Interface for registering and calling firmware-specific operations for ARM
+==========================================================================
+
+Written by Tomasz Figa <t.figa@samsung.com>
+
+Some boards are running with secure firmware running in TrustZone secure
+world, which changes the way some things have to be initialized. This makes
+a need to provide an interface for such platforms to specify available firmware
+operations and call them when needed.
+
+Firmware operations can be specified by filling in a struct firmware_ops
+with appropriate callbacks and then registering it with register_firmware_ops()
+function::
+
+	void register_firmware_ops(const struct firmware_ops *ops)
+
+The ops pointer must be non-NULL. More information about struct firmware_ops
+and its members can be found in arch/arm/include/asm/firmware.h header.
+
+There is a default, empty set of operations provided, so there is no need to
+set anything if platform does not require firmware operations.
+
+To call a firmware operation, a helper macro is provided::
+
+	#define call_firmware_op(op, ...)				\
+		((firmware_ops->op) ? firmware_ops->op(__VA_ARGS__) : (-ENOSYS))
+
+the macro checks if the operation is provided and calls it or otherwise returns
+-ENOSYS to signal that given operation is not available (for example, to allow
+fallback to legacy operation).
+
+Example of registering firmware operations::
+
+	/* board file */
+
+	static int platformX_do_idle(void)
+	{
+		/* tell platformX firmware to enter idle */
+		return 0;
+	}
+
+	static int platformX_cpu_boot(int i)
+	{
+		/* tell platformX firmware to boot CPU i */
+		return 0;
+	}
+
+	static const struct firmware_ops platformX_firmware_ops = {
+		.do_idle        = exynos_do_idle,
+		.cpu_boot       = exynos_cpu_boot,
+		/* other operations not available on platformX */
+	};
+
+	/* init_early callback of machine descriptor */
+	static void __init board_init_early(void)
+	{
+		register_firmware_ops(&platformX_firmware_ops);
+	}
+
+Example of using a firmware operation::
+
+	/* some platform code, e.g. SMP initialization */
+
+	__raw_writel(__pa_symbol(exynos4_secondary_startup),
+		CPU1_BOOT_REG);
+
+	/* Call Exynos specific smc call */
+	if (call_firmware_op(cpu_boot, cpu) == -ENOSYS)
+		cpu_boot_legacy(...); /* Try legacy way */
+
+	gic_raise_softirq(cpumask_of(cpu), 1);
diff --git a/Documentation/arm/google/chromebook-boot-flow.rst b/Documentation/arm/google/chromebook-boot-flow.rst
new file mode 100644
index 000000000..36da77684
--- /dev/null
+++ b/Documentation/arm/google/chromebook-boot-flow.rst
@@ -0,0 +1,69 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+======================================
+Chromebook Boot Flow
+======================================
+
+Most recent Chromebooks that use device tree are using the opensource
+depthcharge_ bootloader. Depthcharge_ expects the OS to be packaged as a `FIT
+Image`_ which contains an OS image as well as a collection of device trees. It
+is up to depthcharge_ to pick the right device tree from the `FIT Image`_ and
+provide it to the OS.
+
+The scheme that depthcharge_ uses to pick the device tree takes into account
+three variables:
+
+- Board name, specified at depthcharge_ compile time. This is $(BOARD) below.
+- Board revision number, determined at runtime (perhaps by reading GPIO
+  strappings, perhaps via some other method). This is $(REV) below.
+- SKU number, read from GPIO strappings at boot time. This is $(SKU) below.
+
+For recent Chromebooks, depthcharge_ creates a match list that looks like this:
+
+- google,$(BOARD)-rev$(REV)-sku$(SKU)
+- google,$(BOARD)-rev$(REV)
+- google,$(BOARD)-sku$(SKU)
+- google,$(BOARD)
+
+Note that some older Chromebooks use a slightly different list that may
+not include SKU matching or may prioritize SKU/rev differently.
+
+Note that for some boards there may be extra board-specific logic to inject
+extra compatibles into the list, but this is uncommon.
+
+Depthcharge_ will look through all device trees in the `FIT Image`_ trying to
+find one that matches the most specific compatible. It will then look
+through all device trees in the `FIT Image`_ trying to find the one that
+matches the *second most* specific compatible, etc.
+
+When searching for a device tree, depthcharge_ doesn't care where the
+compatible string falls within a device tree's root compatible string array.
+As an example, if we're on board "lazor", rev 4, SKU 0 and we have two device
+trees:
+
+- "google,lazor-rev5-sku0", "google,lazor-rev4-sku0", "qcom,sc7180"
+- "google,lazor", "qcom,sc7180"
+
+Then depthcharge_ will pick the first device tree even though
+"google,lazor-rev4-sku0" was the second compatible listed in that device tree.
+This is because it is a more specific compatible than "google,lazor".
+
+It should be noted that depthcharge_ does not have any smarts to try to
+match board or SKU revisions that are "close by". That is to say that
+if depthcharge_ knows it's on "rev4" of a board but there is no "rev4"
+device tree then depthcharge_ *won't* look for a "rev3" device tree.
+
+In general when any significant changes are made to a board the board
+revision number is increased even if none of those changes need to
+be reflected in the device tree. Thus it's fairly common to see device
+trees with multiple revisions.
+
+It should be noted that, taking into account the above system that
+depthcharge_ has, the most flexibility is achieved if the device tree
+supporting the newest revision(s) of a board omits the "-rev{REV}"
+compatible strings. When this is done then if you get a new board
+revision and try to run old software on it then we'll at pick the
+newest device tree we know about.
+
+.. _depthcharge: https://source.chromium.org/chromiumos/chromiumos/codesearch/+/main:src/platform/depthcharge/
+.. _`FIT Image`: https://doc.coreboot.org/lib/payloads/fit.html
diff --git a/Documentation/arm/index.rst b/Documentation/arm/index.rst
new file mode 100644
index 000000000..8c636d4a0
--- /dev/null
+++ b/Documentation/arm/index.rst
@@ -0,0 +1,87 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+================
+ARM Architecture
+================
+
+.. toctree::
+   :maxdepth: 1
+
+   arm
+   booting
+   cluster-pm-race-avoidance
+   firmware
+   interrupts
+   kernel_mode_neon
+   kernel_user_helpers
+   memory
+   mem_alignment
+   tcm
+   setup
+   swp_emulation
+   uefi
+   vlocks
+   porting
+
+   features
+
+SoC-specific documents
+======================
+
+.. toctree::
+   :maxdepth: 1
+
+   google/chromebook-boot-flow
+
+   ixp4xx
+
+   marvell
+   microchip
+
+   netwinder
+   nwfpe/index
+
+   keystone/overview
+   keystone/knav-qmss
+
+   omap/index
+
+   pxa/mfp
+
+
+   sa1100/index
+
+   stm32/stm32f746-overview
+   stm32/overview
+   stm32/stm32h743-overview
+   stm32/stm32h750-overview
+   stm32/stm32f769-overview
+   stm32/stm32f429-overview
+   stm32/stm32mp13-overview
+   stm32/stm32mp157-overview
+   stm32/stm32-dma-mdma-chaining
+
+   sunxi
+
+   samsung/index
+   samsung-s3c24xx/index
+
+   sunxi/clocks
+
+   spear/overview
+
+   sti/stih416-overview
+   sti/stih407-overview
+   sti/stih418-overview
+   sti/overview
+   sti/stih415-overview
+
+   vfp/release-notes
+
+
+.. only::  subproject and html
+
+   Indices
+   =======
+
+   * :ref:`genindex`
diff --git a/Documentation/arm/interrupts.rst b/Documentation/arm/interrupts.rst
new file mode 100644
index 000000000..2ae70e0e9
--- /dev/null
+++ b/Documentation/arm/interrupts.rst
@@ -0,0 +1,169 @@
+==========
+Interrupts
+==========
+
+2.5.2-rmk5:
+  This is the first kernel that contains a major shake up of some of the
+  major architecture-specific subsystems.
+
+Firstly, it contains some pretty major changes to the way we handle the
+MMU TLB.  Each MMU TLB variant is now handled completely separately -
+we have TLB v3, TLB v4 (without write buffer), TLB v4 (with write buffer),
+and finally TLB v4 (with write buffer, with I TLB invalidate entry).
+There is more assembly code inside each of these functions, mainly to
+allow more flexible TLB handling for the future.
+
+Secondly, the IRQ subsystem.
+
+The 2.5 kernels will be having major changes to the way IRQs are handled.
+Unfortunately, this means that machine types that touch the irq_desc[]
+array (basically all machine types) will break, and this means every
+machine type that we currently have.
+
+Lets take an example.  On the Assabet with Neponset, we have::
+
+                  GPIO25                 IRR:2
+        SA1100 ------------> Neponset -----------> SA1111
+                                         IIR:1
+                                      -----------> USAR
+                                         IIR:0
+                                      -----------> SMC9196
+
+The way stuff currently works, all SA1111 interrupts are mutually
+exclusive of each other - if you're processing one interrupt from the
+SA1111 and another comes in, you have to wait for that interrupt to
+finish processing before you can service the new interrupt.  Eg, an
+IDE PIO-based interrupt on the SA1111 excludes all other SA1111 and
+SMC9196 interrupts until it has finished transferring its multi-sector
+data, which can be a long time.  Note also that since we loop in the
+SA1111 IRQ handler, SA1111 IRQs can hold off SMC9196 IRQs indefinitely.
+
+
+The new approach brings several new ideas...
+
+We introduce the concept of a "parent" and a "child".  For example,
+to the Neponset handler, the "parent" is GPIO25, and the "children"d
+are SA1111, SMC9196 and USAR.
+
+We also bring the idea of an IRQ "chip" (mainly to reduce the size of
+the irqdesc array).  This doesn't have to be a real "IC"; indeed the
+SA11x0 IRQs are handled by two separate "chip" structures, one for
+GPIO0-10, and another for all the rest.  It is just a container for
+the various operations (maybe this'll change to a better name).
+This structure has the following operations::
+
+  struct irqchip {
+          /*
+           * Acknowledge the IRQ.
+           * If this is a level-based IRQ, then it is expected to mask the IRQ
+           * as well.
+           */
+          void (*ack)(unsigned int irq);
+          /*
+           * Mask the IRQ in hardware.
+           */
+          void (*mask)(unsigned int irq);
+          /*
+           * Unmask the IRQ in hardware.
+           */
+          void (*unmask)(unsigned int irq);
+          /*
+           * Re-run the IRQ
+           */
+          void (*rerun)(unsigned int irq);
+          /*
+           * Set the type of the IRQ.
+           */
+          int (*type)(unsigned int irq, unsigned int, type);
+  };
+
+ack
+       - required.  May be the same function as mask for IRQs
+         handled by do_level_IRQ.
+mask
+       - required.
+unmask
+       - required.
+rerun
+       - optional.  Not required if you're using do_level_IRQ for all
+         IRQs that use this 'irqchip'.  Generally expected to re-trigger
+         the hardware IRQ if possible.  If not, may call the handler
+	 directly.
+type
+       - optional.  If you don't support changing the type of an IRQ,
+         it should be null so people can detect if they are unable to
+         set the IRQ type.
+
+For each IRQ, we keep the following information:
+
+        - "disable" depth (number of disable_irq()s without enable_irq()s)
+        - flags indicating what we can do with this IRQ (valid, probe,
+          noautounmask) as before
+        - status of the IRQ (probing, enable, etc)
+        - chip
+        - per-IRQ handler
+        - irqaction structure list
+
+The handler can be one of the 3 standard handlers - "level", "edge" and
+"simple", or your own specific handler if you need to do something special.
+
+The "level" handler is what we currently have - its pretty simple.
+"edge" knows about the brokenness of such IRQ implementations - that you
+need to leave the hardware IRQ enabled while processing it, and queueing
+further IRQ events should the IRQ happen again while processing.  The
+"simple" handler is very basic, and does not perform any hardware
+manipulation, nor state tracking.  This is useful for things like the
+SMC9196 and USAR above.
+
+So, what's changed?
+===================
+
+1. Machine implementations must not write to the irqdesc array.
+
+2. New functions to manipulate the irqdesc array.  The first 4 are expected
+   to be useful only to machine specific code.  The last is recommended to
+   only be used by machine specific code, but may be used in drivers if
+   absolutely necessary.
+
+        set_irq_chip(irq,chip)
+                Set the mask/unmask methods for handling this IRQ
+
+        set_irq_handler(irq,handler)
+                Set the handler for this IRQ (level, edge, simple)
+
+        set_irq_chained_handler(irq,handler)
+                Set a "chained" handler for this IRQ - automatically
+                enables this IRQ (eg, Neponset and SA1111 handlers).
+
+        set_irq_flags(irq,flags)
+                Set the valid/probe/noautoenable flags.
+
+        set_irq_type(irq,type)
+                Set active the IRQ edge(s)/level.  This replaces the
+                SA1111 INTPOL manipulation, and the set_GPIO_IRQ_edge()
+                function.  Type should be one of IRQ_TYPE_xxx defined in
+		<linux/irq.h>
+
+3. set_GPIO_IRQ_edge() is obsolete, and should be replaced by set_irq_type.
+
+4. Direct access to SA1111 INTPOL is deprecated.  Use set_irq_type instead.
+
+5. A handler is expected to perform any necessary acknowledgement of the
+   parent IRQ via the correct chip specific function.  For instance, if
+   the SA1111 is directly connected to a SA1110 GPIO, then you should
+   acknowledge the SA1110 IRQ each time you re-read the SA1111 IRQ status.
+
+6. For any child which doesn't have its own IRQ enable/disable controls
+   (eg, SMC9196), the handler must mask or acknowledge the parent IRQ
+   while the child handler is called, and the child handler should be the
+   "simple" handler (not "edge" nor "level").  After the handler completes,
+   the parent IRQ should be unmasked, and the status of all children must
+   be re-checked for pending events.  (see the Neponset IRQ handler for
+   details).
+
+7. fixup_irq() is gone, as is `arch/arm/mach-*/include/mach/irq.h`
+
+Please note that this will not solve all problems - some of them are
+hardware based.  Mixing level-based and edge-based IRQs on the same
+parent signal (eg neponset) is one such area where a software based
+solution can't provide the full answer to low IRQ latency.
diff --git a/Documentation/arm/ixp4xx.rst b/Documentation/arm/ixp4xx.rst
new file mode 100644
index 000000000..a57235616
--- /dev/null
+++ b/Documentation/arm/ixp4xx.rst
@@ -0,0 +1,173 @@
+===========================================================
+Release Notes for Linux on Intel's IXP4xx Network Processor
+===========================================================
+
+Maintained by Deepak Saxena <dsaxena@plexity.net>
+-------------------------------------------------------------------------
+
+1. Overview
+
+Intel's IXP4xx network processor is a highly integrated SOC that
+is targeted for network applications, though it has become popular
+in industrial control and other areas due to low cost and power
+consumption. The IXP4xx family currently consists of several processors
+that support different network offload functions such as encryption,
+routing, firewalling, etc. The IXP46x family is an updated version which
+supports faster speeds, new memory and flash configurations, and more
+integration such as an on-chip I2C controller.
+
+For more information on the various versions of the CPU, see:
+
+   http://developer.intel.com/design/network/products/npfamily/ixp4xx.htm
+
+Intel also made the IXCP1100 CPU for sometime which is an IXP4xx
+stripped of much of the network intelligence.
+
+2. Linux Support
+
+Linux currently supports the following features on the IXP4xx chips:
+
+- Dual serial ports
+- PCI interface
+- Flash access (MTD/JFFS)
+- I2C through GPIO on IXP42x
+- GPIO for input/output/interrupts
+  See arch/arm/mach-ixp4xx/include/mach/platform.h for access functions.
+- Timers (watchdog, OS)
+
+The following components of the chips are not supported by Linux and
+require the use of Intel's proprietary CSR software:
+
+- USB device interface
+- Network interfaces (HSS, Utopia, NPEs, etc)
+- Network offload functionality
+
+If you need to use any of the above, you need to download Intel's
+software from:
+
+   http://developer.intel.com/design/network/products/npfamily/ixp425.htm
+
+DO NOT POST QUESTIONS TO THE LINUX MAILING LISTS REGARDING THE PROPRIETARY
+SOFTWARE.
+
+There are several websites that provide directions/pointers on using
+Intel's software:
+
+   - http://sourceforge.net/projects/ixp4xx-osdg/
+     Open Source Developer's Guide for using uClinux and the Intel libraries
+
+   - http://gatewaymaker.sourceforge.net/
+     Simple one page summary of building a gateway using an IXP425 and Linux
+
+   - http://ixp425.sourceforge.net/
+     ATM device driver for IXP425 that relies on Intel's libraries
+
+3. Known Issues/Limitations
+
+3a. Limited inbound PCI window
+
+The IXP4xx family allows for up to 256MB of memory but the PCI interface
+can only expose 64MB of that memory to the PCI bus. This means that if
+you are running with > 64MB, all PCI buffers outside of the accessible
+range will be bounced using the routines in arch/arm/common/dmabounce.c.
+
+3b. Limited outbound PCI window
+
+IXP4xx provides two methods of accessing PCI memory space:
+
+1) A direct mapped window from 0x48000000 to 0x4bffffff (64MB).
+   To access PCI via this space, we simply ioremap() the BAR
+   into the kernel and we can use the standard read[bwl]/write[bwl]
+   macros. This is the preffered method due to speed but it
+   limits the system to just 64MB of PCI memory. This can be
+   problamatic if using video cards and other memory-heavy devices.
+
+2) If > 64MB of memory space is required, the IXP4xx can be
+   configured to use indirect registers to access PCI This allows
+   for up to 128MB (0x48000000 to 0x4fffffff) of memory on the bus.
+   The disadvantage of this is that every PCI access requires
+   three local register accesses plus a spinlock, but in some
+   cases the performance hit is acceptable. In addition, you cannot
+   mmap() PCI devices in this case due to the indirect nature
+   of the PCI window.
+
+By default, the direct method is used for performance reasons. If
+you need more PCI memory, enable the IXP4XX_INDIRECT_PCI config option.
+
+3c. GPIO as Interrupts
+
+Currently the code only handles level-sensitive GPIO interrupts
+
+4. Supported platforms
+
+ADI Engineering Coyote Gateway Reference Platform
+http://www.adiengineering.com/productsCoyote.html
+
+   The ADI Coyote platform is reference design for those building
+   small residential/office gateways. One NPE is connected to a 10/100
+   interface, one to 4-port 10/100 switch, and the third to and ADSL
+   interface. In addition, it also supports to POTs interfaces connected
+   via SLICs. Note that those are not supported by Linux ATM. Finally,
+   the platform has two mini-PCI slots used for 802.11[bga] cards.
+   Finally, there is an IDE port hanging off the expansion bus.
+
+Gateworks Avila Network Platform
+http://www.gateworks.com/support/overview.php
+
+   The Avila platform is basically and IXDP425 with the 4 PCI slots
+   replaced with mini-PCI slots and a CF IDE interface hanging off
+   the expansion bus.
+
+Intel IXDP425 Development Platform
+http://www.intel.com/design/network/products/npfamily/ixdpg425.htm
+
+   This is Intel's standard reference platform for the IXDP425 and is
+   also known as the Richfield board. It contains 4 PCI slots, 16MB
+   of flash, two 10/100 ports and one ADSL port.
+
+Intel IXDP465 Development Platform
+http://www.intel.com/design/network/products/npfamily/ixdp465.htm
+
+   This is basically an IXDP425 with an IXP465 and 32M of flash instead
+   of just 16.
+
+Intel IXDPG425 Development Platform
+
+   This is basically and ADI Coyote board with a NEC EHCI controller
+   added. One issue with this board is that the mini-PCI slots only
+   have the 3.3v line connected, so you can't use a PCI to mini-PCI
+   adapter with an E100 card. So to NFS root you need to use either
+   the CSR or a WiFi card and a ramdisk that BOOTPs and then does
+   a pivot_root to NFS.
+
+Motorola PrPMC1100 Processor Mezanine Card
+http://www.fountainsys.com
+
+   The PrPMC1100 is based on the IXCP1100 and is meant to plug into
+   and IXP2400/2800 system to act as the system controller. It simply
+   contains a CPU and 16MB of flash on the board and needs to be
+   plugged into a carrier board to function. Currently Linux only
+   supports the Motorola PrPMC carrier board for this platform.
+
+5. TODO LIST
+
+- Add support for Coyote IDE
+- Add support for edge-based GPIO interrupts
+- Add support for CF IDE on expansion bus
+
+6. Thanks
+
+The IXP4xx work has been funded by Intel Corp. and MontaVista Software, Inc.
+
+The following people have contributed patches/comments/etc:
+
+- Lennerty Buytenhek
+- Lutz Jaenicke
+- Justin Mayfield
+- Robert E. Ranslam
+
+[I know I've forgotten others, please email me to be added]
+
+-------------------------------------------------------------------------
+
+Last Update: 01/04/2005
diff --git a/Documentation/arm/kernel_mode_neon.rst b/Documentation/arm/kernel_mode_neon.rst
new file mode 100644
index 000000000..9bfb71a2a
--- /dev/null
+++ b/Documentation/arm/kernel_mode_neon.rst
@@ -0,0 +1,124 @@
+================
+Kernel mode NEON
+================
+
+TL;DR summary
+-------------
+* Use only NEON instructions, or VFP instructions that don't rely on support
+  code
+* Isolate your NEON code in a separate compilation unit, and compile it with
+  '-march=armv7-a -mfpu=neon -mfloat-abi=softfp'
+* Put kernel_neon_begin() and kernel_neon_end() calls around the calls into your
+  NEON code
+* Don't sleep in your NEON code, and be aware that it will be executed with
+  preemption disabled
+
+
+Introduction
+------------
+It is possible to use NEON instructions (and in some cases, VFP instructions) in
+code that runs in kernel mode. However, for performance reasons, the NEON/VFP
+register file is not preserved and restored at every context switch or taken
+exception like the normal register file is, so some manual intervention is
+required. Furthermore, special care is required for code that may sleep [i.e.,
+may call schedule()], as NEON or VFP instructions will be executed in a
+non-preemptible section for reasons outlined below.
+
+
+Lazy preserve and restore
+-------------------------
+The NEON/VFP register file is managed using lazy preserve (on UP systems) and
+lazy restore (on both SMP and UP systems). This means that the register file is
+kept 'live', and is only preserved and restored when multiple tasks are
+contending for the NEON/VFP unit (or, in the SMP case, when a task migrates to
+another core). Lazy restore is implemented by disabling the NEON/VFP unit after
+every context switch, resulting in a trap when subsequently a NEON/VFP
+instruction is issued, allowing the kernel to step in and perform the restore if
+necessary.
+
+Any use of the NEON/VFP unit in kernel mode should not interfere with this, so
+it is required to do an 'eager' preserve of the NEON/VFP register file, and
+enable the NEON/VFP unit explicitly so no exceptions are generated on first
+subsequent use. This is handled by the function kernel_neon_begin(), which
+should be called before any kernel mode NEON or VFP instructions are issued.
+Likewise, the NEON/VFP unit should be disabled again after use to make sure user
+mode will hit the lazy restore trap upon next use. This is handled by the
+function kernel_neon_end().
+
+
+Interruptions in kernel mode
+----------------------------
+For reasons of performance and simplicity, it was decided that there shall be no
+preserve/restore mechanism for the kernel mode NEON/VFP register contents. This
+implies that interruptions of a kernel mode NEON section can only be allowed if
+they are guaranteed not to touch the NEON/VFP registers. For this reason, the
+following rules and restrictions apply in the kernel:
+* NEON/VFP code is not allowed in interrupt context;
+* NEON/VFP code is not allowed to sleep;
+* NEON/VFP code is executed with preemption disabled.
+
+If latency is a concern, it is possible to put back to back calls to
+kernel_neon_end() and kernel_neon_begin() in places in your code where none of
+the NEON registers are live. (Additional calls to kernel_neon_begin() should be
+reasonably cheap if no context switch occurred in the meantime)
+
+
+VFP and support code
+--------------------
+Earlier versions of VFP (prior to version 3) rely on software support for things
+like IEEE-754 compliant underflow handling etc. When the VFP unit needs such
+software assistance, it signals the kernel by raising an undefined instruction
+exception. The kernel responds by inspecting the VFP control registers and the
+current instruction and arguments, and emulates the instruction in software.
+
+Such software assistance is currently not implemented for VFP instructions
+executed in kernel mode. If such a condition is encountered, the kernel will
+fail and generate an OOPS.
+
+
+Separating NEON code from ordinary code
+---------------------------------------
+The compiler is not aware of the special significance of kernel_neon_begin() and
+kernel_neon_end(), i.e., that it is only allowed to issue NEON/VFP instructions
+between calls to these respective functions. Furthermore, GCC may generate NEON
+instructions of its own at -O3 level if -mfpu=neon is selected, and even if the
+kernel is currently compiled at -O2, future changes may result in NEON/VFP
+instructions appearing in unexpected places if no special care is taken.
+
+Therefore, the recommended and only supported way of using NEON/VFP in the
+kernel is by adhering to the following rules:
+
+* isolate the NEON code in a separate compilation unit and compile it with
+  '-march=armv7-a -mfpu=neon -mfloat-abi=softfp';
+* issue the calls to kernel_neon_begin(), kernel_neon_end() as well as the calls
+  into the unit containing the NEON code from a compilation unit which is *not*
+  built with the GCC flag '-mfpu=neon' set.
+
+As the kernel is compiled with '-msoft-float', the above will guarantee that
+both NEON and VFP instructions will only ever appear in designated compilation
+units at any optimization level.
+
+
+NEON assembler
+--------------
+NEON assembler is supported with no additional caveats as long as the rules
+above are followed.
+
+
+NEON code generated by GCC
+--------------------------
+The GCC option -ftree-vectorize (implied by -O3) tries to exploit implicit
+parallelism, and generates NEON code from ordinary C source code. This is fully
+supported as long as the rules above are followed.
+
+
+NEON intrinsics
+---------------
+NEON intrinsics are also supported. However, as code using NEON intrinsics
+relies on the GCC header <arm_neon.h>, (which #includes <stdint.h>), you should
+observe the following in addition to the rules above:
+
+* Compile the unit containing the NEON intrinsics with '-ffreestanding' so GCC
+  uses its builtin version of <stdint.h> (this is a C99 header which the kernel
+  does not supply);
+* Include <arm_neon.h> last, or at least after <linux/types.h>
diff --git a/Documentation/arm/kernel_user_helpers.rst b/Documentation/arm/kernel_user_helpers.rst
new file mode 100644
index 000000000..eb6f3d916
--- /dev/null
+++ b/Documentation/arm/kernel_user_helpers.rst
@@ -0,0 +1,268 @@
+============================
+Kernel-provided User Helpers
+============================
+
+These are segment of kernel provided user code reachable from user space
+at a fixed address in kernel memory.  This is used to provide user space
+with some operations which require kernel help because of unimplemented
+native feature and/or instructions in many ARM CPUs. The idea is for this
+code to be executed directly in user mode for best efficiency but which is
+too intimate with the kernel counter part to be left to user libraries.
+In fact this code might even differ from one CPU to another depending on
+the available instruction set, or whether it is a SMP systems. In other
+words, the kernel reserves the right to change this code as needed without
+warning. Only the entry points and their results as documented here are
+guaranteed to be stable.
+
+This is different from (but doesn't preclude) a full blown VDSO
+implementation, however a VDSO would prevent some assembly tricks with
+constants that allows for efficient branching to those code segments. And
+since those code segments only use a few cycles before returning to user
+code, the overhead of a VDSO indirect far call would add a measurable
+overhead to such minimalistic operations.
+
+User space is expected to bypass those helpers and implement those things
+inline (either in the code emitted directly by the compiler, or part of
+the implementation of a library call) when optimizing for a recent enough
+processor that has the necessary native support, but only if resulting
+binaries are already to be incompatible with earlier ARM processors due to
+usage of similar native instructions for other things.  In other words
+don't make binaries unable to run on earlier processors just for the sake
+of not using these kernel helpers if your compiled code is not going to
+use new instructions for other purpose.
+
+New helpers may be added over time, so an older kernel may be missing some
+helpers present in a newer kernel.  For this reason, programs must check
+the value of __kuser_helper_version (see below) before assuming that it is
+safe to call any particular helper.  This check should ideally be
+performed only once at process startup time, and execution aborted early
+if the required helpers are not provided by the kernel version that
+process is running on.
+
+kuser_helper_version
+--------------------
+
+Location:	0xffff0ffc
+
+Reference declaration::
+
+  extern int32_t __kuser_helper_version;
+
+Definition:
+
+  This field contains the number of helpers being implemented by the
+  running kernel.  User space may read this to determine the availability
+  of a particular helper.
+
+Usage example::
+
+  #define __kuser_helper_version (*(int32_t *)0xffff0ffc)
+
+  void check_kuser_version(void)
+  {
+	if (__kuser_helper_version < 2) {
+		fprintf(stderr, "can't do atomic operations, kernel too old\n");
+		abort();
+	}
+  }
+
+Notes:
+
+  User space may assume that the value of this field never changes
+  during the lifetime of any single process.  This means that this
+  field can be read once during the initialisation of a library or
+  startup phase of a program.
+
+kuser_get_tls
+-------------
+
+Location:	0xffff0fe0
+
+Reference prototype::
+
+  void * __kuser_get_tls(void);
+
+Input:
+
+  lr = return address
+
+Output:
+
+  r0 = TLS value
+
+Clobbered registers:
+
+  none
+
+Definition:
+
+  Get the TLS value as previously set via the __ARM_NR_set_tls syscall.
+
+Usage example::
+
+  typedef void * (__kuser_get_tls_t)(void);
+  #define __kuser_get_tls (*(__kuser_get_tls_t *)0xffff0fe0)
+
+  void foo()
+  {
+	void *tls = __kuser_get_tls();
+	printf("TLS = %p\n", tls);
+  }
+
+Notes:
+
+  - Valid only if __kuser_helper_version >= 1 (from kernel version 2.6.12).
+
+kuser_cmpxchg
+-------------
+
+Location:	0xffff0fc0
+
+Reference prototype::
+
+  int __kuser_cmpxchg(int32_t oldval, int32_t newval, volatile int32_t *ptr);
+
+Input:
+
+  r0 = oldval
+  r1 = newval
+  r2 = ptr
+  lr = return address
+
+Output:
+
+  r0 = success code (zero or non-zero)
+  C flag = set if r0 == 0, clear if r0 != 0
+
+Clobbered registers:
+
+  r3, ip, flags
+
+Definition:
+
+  Atomically store newval in `*ptr` only if `*ptr` is equal to oldval.
+  Return zero if `*ptr` was changed or non-zero if no exchange happened.
+  The C flag is also set if `*ptr` was changed to allow for assembly
+  optimization in the calling code.
+
+Usage example::
+
+  typedef int (__kuser_cmpxchg_t)(int oldval, int newval, volatile int *ptr);
+  #define __kuser_cmpxchg (*(__kuser_cmpxchg_t *)0xffff0fc0)
+
+  int atomic_add(volatile int *ptr, int val)
+  {
+	int old, new;
+
+	do {
+		old = *ptr;
+		new = old + val;
+	} while(__kuser_cmpxchg(old, new, ptr));
+
+	return new;
+  }
+
+Notes:
+
+  - This routine already includes memory barriers as needed.
+
+  - Valid only if __kuser_helper_version >= 2 (from kernel version 2.6.12).
+
+kuser_memory_barrier
+--------------------
+
+Location:	0xffff0fa0
+
+Reference prototype::
+
+  void __kuser_memory_barrier(void);
+
+Input:
+
+  lr = return address
+
+Output:
+
+  none
+
+Clobbered registers:
+
+  none
+
+Definition:
+
+  Apply any needed memory barrier to preserve consistency with data modified
+  manually and __kuser_cmpxchg usage.
+
+Usage example::
+
+  typedef void (__kuser_dmb_t)(void);
+  #define __kuser_dmb (*(__kuser_dmb_t *)0xffff0fa0)
+
+Notes:
+
+  - Valid only if __kuser_helper_version >= 3 (from kernel version 2.6.15).
+
+kuser_cmpxchg64
+---------------
+
+Location:	0xffff0f60
+
+Reference prototype::
+
+  int __kuser_cmpxchg64(const int64_t *oldval,
+                        const int64_t *newval,
+                        volatile int64_t *ptr);
+
+Input:
+
+  r0 = pointer to oldval
+  r1 = pointer to newval
+  r2 = pointer to target value
+  lr = return address
+
+Output:
+
+  r0 = success code (zero or non-zero)
+  C flag = set if r0 == 0, clear if r0 != 0
+
+Clobbered registers:
+
+  r3, lr, flags
+
+Definition:
+
+  Atomically store the 64-bit value pointed by `*newval` in `*ptr` only if `*ptr`
+  is equal to the 64-bit value pointed by `*oldval`.  Return zero if `*ptr` was
+  changed or non-zero if no exchange happened.
+
+  The C flag is also set if `*ptr` was changed to allow for assembly
+  optimization in the calling code.
+
+Usage example::
+
+  typedef int (__kuser_cmpxchg64_t)(const int64_t *oldval,
+                                    const int64_t *newval,
+                                    volatile int64_t *ptr);
+  #define __kuser_cmpxchg64 (*(__kuser_cmpxchg64_t *)0xffff0f60)
+
+  int64_t atomic_add64(volatile int64_t *ptr, int64_t val)
+  {
+	int64_t old, new;
+
+	do {
+		old = *ptr;
+		new = old + val;
+	} while(__kuser_cmpxchg64(&old, &new, ptr));
+
+	return new;
+  }
+
+Notes:
+
+  - This routine already includes memory barriers as needed.
+
+  - Due to the length of this sequence, this spans 2 conventional kuser
+    "slots", therefore 0xffff0f80 is not used as a valid entry point.
+
+  - Valid only if __kuser_helper_version >= 5 (from kernel version 3.1).
diff --git a/Documentation/arm/keystone/knav-qmss.rst b/Documentation/arm/keystone/knav-qmss.rst
new file mode 100644
index 000000000..7f7638d80
--- /dev/null
+++ b/Documentation/arm/keystone/knav-qmss.rst
@@ -0,0 +1,60 @@
+======================================================================
+Texas Instruments Keystone Navigator Queue Management SubSystem driver
+======================================================================
+
+Driver source code path
+  drivers/soc/ti/knav_qmss.c
+  drivers/soc/ti/knav_qmss_acc.c
+
+The QMSS (Queue Manager Sub System) found on Keystone SOCs is one of
+the main hardware sub system which forms the backbone of the Keystone
+multi-core Navigator. QMSS consist of queue managers, packed-data structure
+processors(PDSP), linking RAM, descriptor pools and infrastructure
+Packet DMA.
+The Queue Manager is a hardware module that is responsible for accelerating
+management of the packet queues. Packets are queued/de-queued by writing or
+reading descriptor address to a particular memory mapped location. The PDSPs
+perform QMSS related functions like accumulation, QoS, or event management.
+Linking RAM registers are used to link the descriptors which are stored in
+descriptor RAM. Descriptor RAM is configurable as internal or external memory.
+The QMSS driver manages the PDSP setups, linking RAM regions,
+queue pool management (allocation, push, pop and notify) and descriptor
+pool management.
+
+knav qmss driver provides a set of APIs to drivers to open/close qmss queues,
+allocate descriptor pools, map the descriptors, push/pop to queues etc. For
+details of the available APIs, please refers to include/linux/soc/ti/knav_qmss.h
+
+DT documentation is available at
+Documentation/devicetree/bindings/soc/ti/keystone-navigator-qmss.txt
+
+Accumulator QMSS queues using PDSP firmware
+============================================
+The QMSS PDSP firmware support accumulator channel that can monitor a single
+queue or multiple contiguous queues. drivers/soc/ti/knav_qmss_acc.c is the
+driver that interface with the accumulator PDSP. This configures
+accumulator channels defined in DTS (example in DT documentation) to monitor
+1 or 32 queues per channel. More description on the firmware is available in
+CPPI/QMSS Low Level Driver document (docs/CPPI_QMSS_LLD_SDS.pdf) at
+
+	git://git.ti.com/keystone-rtos/qmss-lld.git
+
+k2_qmss_pdsp_acc48_k2_le_1_0_0_9.bin firmware supports upto 48 accumulator
+channels. This firmware is available under ti-keystone folder of
+firmware.git at
+
+   git://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git
+
+To use copy the firmware image to lib/firmware folder of the initramfs or
+ubifs file system and provide a sym link to k2_qmss_pdsp_acc48_k2_le_1_0_0_9.bin
+in the file system and boot up the kernel. User would see
+
+ "firmware file ks2_qmss_pdsp_acc48.bin downloaded for PDSP"
+
+in the boot up log if loading of firmware to PDSP is successful.
+
+Use of accumulated queues requires the firmware image to be present in the
+file system. The driver doesn't acc queues to the supported queue range if
+PDSP is not running in the SoC. The API call fails if there is a queue open
+request to an acc queue and PDSP is not running. So make sure to copy firmware
+to file system before using these queue types.
diff --git a/Documentation/arm/keystone/overview.rst b/Documentation/arm/keystone/overview.rst
new file mode 100644
index 000000000..cd90298c4
--- /dev/null
+++ b/Documentation/arm/keystone/overview.rst
@@ -0,0 +1,74 @@
+==========================
+TI Keystone Linux Overview
+==========================
+
+Introduction
+------------
+Keystone range of SoCs are based on ARM Cortex-A15 MPCore Processors
+and c66x DSP cores. This document describes essential information required
+for users to run Linux on Keystone based EVMs from Texas Instruments.
+
+Following SoCs  & EVMs are currently supported:-
+
+K2HK SoC and EVM
+=================
+
+a.k.a Keystone 2 Hawking/Kepler SoC
+TCI6636K2H & TCI6636K2K: See documentation at
+
+	http://www.ti.com/product/tci6638k2k
+	http://www.ti.com/product/tci6638k2h
+
+EVM:
+  http://www.advantech.com/Support/TI-EVM/EVMK2HX_sd.aspx
+
+K2E SoC and EVM
+===============
+
+a.k.a Keystone 2 Edison SoC
+
+K2E  -  66AK2E05:
+
+See documentation at
+
+	http://www.ti.com/product/66AK2E05/technicaldocuments
+
+EVM:
+   https://www.einfochips.com/index.php/partnerships/texas-instruments/k2e-evm.html
+
+K2L SoC and EVM
+===============
+
+a.k.a Keystone 2 Lamarr SoC
+
+K2L  -  TCI6630K2L:
+
+See documentation at
+	http://www.ti.com/product/TCI6630K2L/technicaldocuments
+
+EVM:
+  https://www.einfochips.com/index.php/partnerships/texas-instruments/k2l-evm.html
+
+Configuration
+-------------
+
+All of the K2 SoCs/EVMs share a common defconfig, keystone_defconfig and same
+image is used to boot on individual EVMs. The platform configuration is
+specified through DTS. Following are the DTS used:
+
+	K2HK EVM:
+		k2hk-evm.dts
+	K2E EVM:
+		k2e-evm.dts
+	K2L EVM:
+		k2l-evm.dts
+
+The device tree documentation for the keystone machines are located at
+
+        Documentation/devicetree/bindings/arm/keystone/keystone.txt
+
+Document Author
+---------------
+Murali Karicheri <m-karicheri2@ti.com>
+
+Copyright 2015 Texas Instruments
diff --git a/Documentation/arm/marvell.rst b/Documentation/arm/marvell.rst
new file mode 100644
index 000000000..370721518
--- /dev/null
+++ b/Documentation/arm/marvell.rst
@@ -0,0 +1,525 @@
+================
+ARM Marvell SoCs
+================
+
+This document lists all the ARM Marvell SoCs that are currently
+supported in mainline by the Linux kernel. As the Marvell families of
+SoCs are large and complex, it is hard to understand where the support
+for a particular SoC is available in the Linux kernel. This document
+tries to help in understanding where those SoCs are supported, and to
+match them with their corresponding public datasheet, when available.
+
+Orion family
+------------
+
+  Flavors:
+        - 88F5082
+        - 88F5181
+        - 88F5181L
+        - 88F5182
+
+               - Datasheet: https://web.archive.org/web/20210124231420/http://csclub.uwaterloo.ca/~board/ts7800/MV88F5182-datasheet.pdf
+               - Programmer's User Guide: https://web.archive.org/web/20210124231536/http://csclub.uwaterloo.ca/~board/ts7800/MV88F5182-opensource-manual.pdf
+               - User Manual: https://web.archive.org/web/20210124231631/http://csclub.uwaterloo.ca/~board/ts7800/MV88F5182-usermanual.pdf
+               - Functional Errata: https://web.archive.org/web/20210704165540/https://www.digriz.org.uk/ts78xx/88F5182_Functional_Errata.pdf
+        - 88F5281
+
+               - Datasheet: https://web.archive.org/web/20131028144728/http://www.ocmodshop.com/images/reviews/networking/qnap_ts409u/marvel_88f5281_data_sheet.pdf
+        - 88F6183
+  Core:
+	Feroceon 88fr331 (88f51xx) or 88fr531-vd (88f52xx) ARMv5 compatible
+  Linux kernel mach directory:
+	arch/arm/mach-orion5x
+  Linux kernel plat directory:
+	arch/arm/plat-orion
+
+Kirkwood family
+---------------
+
+  Flavors:
+        - 88F6282 a.k.a Armada 300
+
+                - Product Brief  : https://web.archive.org/web/20111027032509/http://www.marvell.com/embedded-processors/armada-300/assets/armada_310.pdf
+        - 88F6283 a.k.a Armada 310
+
+                - Product Brief  : https://web.archive.org/web/20111027032509/http://www.marvell.com/embedded-processors/armada-300/assets/armada_310.pdf
+        - 88F6190
+
+                - Product Brief  : https://web.archive.org/web/20130730072715/http://www.marvell.com/embedded-processors/kirkwood/assets/88F6190-003_WEB.pdf
+                - Hardware Spec  : https://web.archive.org/web/20121021182835/http://www.marvell.com/embedded-processors/kirkwood/assets/HW_88F619x_OpenSource.pdf
+                - Functional Spec: https://web.archive.org/web/20130730091033/http://www.marvell.com/embedded-processors/kirkwood/assets/FS_88F6180_9x_6281_OpenSource.pdf
+        - 88F6192
+
+                - Product Brief  : https://web.archive.org/web/20131113121446/http://www.marvell.com/embedded-processors/kirkwood/assets/88F6192-003_ver1.pdf
+                - Hardware Spec  : https://web.archive.org/web/20121021182835/http://www.marvell.com/embedded-processors/kirkwood/assets/HW_88F619x_OpenSource.pdf
+                - Functional Spec: https://web.archive.org/web/20130730091033/http://www.marvell.com/embedded-processors/kirkwood/assets/FS_88F6180_9x_6281_OpenSource.pdf
+        - 88F6182
+        - 88F6180
+
+                - Product Brief  : https://web.archive.org/web/20120616201621/http://www.marvell.com/embedded-processors/kirkwood/assets/88F6180-003_ver1.pdf
+                - Hardware Spec  : https://web.archive.org/web/20130730091654/http://www.marvell.com/embedded-processors/kirkwood/assets/HW_88F6180_OpenSource.pdf
+                - Functional Spec: https://web.archive.org/web/20130730091033/http://www.marvell.com/embedded-processors/kirkwood/assets/FS_88F6180_9x_6281_OpenSource.pdf
+        - 88F6280
+
+                - Product Brief  : https://web.archive.org/web/20130730091058/http://www.marvell.com/embedded-processors/kirkwood/assets/88F6280_SoC_PB-001.pdf
+        - 88F6281
+
+                - Product Brief  : https://web.archive.org/web/20120131133709/http://www.marvell.com/embedded-processors/kirkwood/assets/88F6281-004_ver1.pdf
+                - Hardware Spec  : https://web.archive.org/web/20120620073511/http://www.marvell.com/embedded-processors/kirkwood/assets/HW_88F6281_OpenSource.pdf
+                - Functional Spec: https://web.archive.org/web/20130730091033/http://www.marvell.com/embedded-processors/kirkwood/assets/FS_88F6180_9x_6281_OpenSource.pdf
+        - 88F6321
+        - 88F6322
+        - 88F6323
+
+                - Product Brief  : https://web.archive.org/web/20120616201639/http://www.marvell.com/embedded-processors/kirkwood/assets/88f632x_pb.pdf
+  Homepage:
+	https://web.archive.org/web/20160513194943/http://www.marvell.com/embedded-processors/kirkwood/
+  Core:
+	Feroceon 88fr131 ARMv5 compatible
+  Linux kernel mach directory:
+	arch/arm/mach-mvebu
+  Linux kernel plat directory:
+	none
+
+Discovery family
+----------------
+
+  Flavors:
+        - MV78100
+
+                - Product Brief  : https://web.archive.org/web/20120616194711/http://www.marvell.com/embedded-processors/discovery-innovation/assets/MV78100-003_WEB.pdf
+                - Hardware Spec  : https://web.archive.org/web/20141005120451/http://www.marvell.com/embedded-processors/discovery-innovation/assets/HW_MV78100_OpenSource.pdf
+                - Functional Spec: https://web.archive.org/web/20111110081125/http://www.marvell.com/embedded-processors/discovery-innovation/assets/FS_MV76100_78100_78200_OpenSource.pdf
+        - MV78200
+
+                - Product Brief  : https://web.archive.org/web/20140801121623/http://www.marvell.com/embedded-processors/discovery-innovation/assets/MV78200-002_WEB.pdf
+                - Hardware Spec  : https://web.archive.org/web/20141005120458/http://www.marvell.com/embedded-processors/discovery-innovation/assets/HW_MV78200_OpenSource.pdf
+                - Functional Spec: https://web.archive.org/web/20111110081125/http://www.marvell.com/embedded-processors/discovery-innovation/assets/FS_MV76100_78100_78200_OpenSource.pdf
+
+        - MV76100
+
+                - Product Brief  : https://web.archive.org/web/20140722064429/http://www.marvell.com/embedded-processors/discovery-innovation/assets/MV76100-002_WEB.pdf
+                - Hardware Spec  : https://web.archive.org/web/20140722064425/http://www.marvell.com/embedded-processors/discovery-innovation/assets/HW_MV76100_OpenSource.pdf
+                - Functional Spec: https://web.archive.org/web/20111110081125/http://www.marvell.com/embedded-processors/discovery-innovation/assets/FS_MV76100_78100_78200_OpenSource.pdf
+
+                Not supported by the Linux kernel.
+
+  Homepage:
+        https://web.archive.org/web/20110924171043/http://www.marvell.com/embedded-processors/discovery-innovation/
+  Core:
+	Feroceon 88fr571-vd ARMv5 compatible
+
+  Linux kernel mach directory:
+	arch/arm/mach-mv78xx0
+  Linux kernel plat directory:
+	arch/arm/plat-orion
+
+EBU Armada family
+-----------------
+
+  Armada 370 Flavors:
+        - 88F6710
+        - 88F6707
+        - 88F6W11
+
+    - Product infos:   https://web.archive.org/web/20141002083258/http://www.marvell.com/embedded-processors/armada-370/
+    - Product Brief:   https://web.archive.org/web/20121115063038/http://www.marvell.com/embedded-processors/armada-300/assets/Marvell_ARMADA_370_SoC.pdf
+    - Hardware Spec:   https://web.archive.org/web/20140617183747/http://www.marvell.com/embedded-processors/armada-300/assets/ARMADA370-datasheet.pdf
+    - Functional Spec: https://web.archive.org/web/20140617183701/http://www.marvell.com/embedded-processors/armada-300/assets/ARMADA370-FunctionalSpec-datasheet.pdf
+
+  Core:
+	Sheeva ARMv7 compatible PJ4B
+
+  Armada XP Flavors:
+        - MV78230
+        - MV78260
+        - MV78460
+
+    NOTE:
+	not to be confused with the non-SMP 78xx0 SoCs
+
+    - Product infos:   https://web.archive.org/web/20150101215721/http://www.marvell.com/embedded-processors/armada-xp/
+    - Product Brief:   https://web.archive.org/web/20121021173528/http://www.marvell.com/embedded-processors/armada-xp/assets/Marvell-ArmadaXP-SoC-product%20brief.pdf
+    - Functional Spec: https://web.archive.org/web/20180829171131/http://www.marvell.com/embedded-processors/armada-xp/assets/ARMADA-XP-Functional-SpecDatasheet.pdf
+    - Hardware Specs:
+        - https://web.archive.org/web/20141127013651/http://www.marvell.com/embedded-processors/armada-xp/assets/HW_MV78230_OS.PDF
+        - https://web.archive.org/web/20141222000224/http://www.marvell.com/embedded-processors/armada-xp/assets/HW_MV78260_OS.PDF
+        - https://web.archive.org/web/20141222000230/http://www.marvell.com/embedded-processors/armada-xp/assets/HW_MV78460_OS.PDF
+
+  Core:
+	Sheeva ARMv7 compatible Dual-core or Quad-core PJ4B-MP
+
+  Armada 375 Flavors:
+	- 88F6720
+
+    - Product infos: https://web.archive.org/web/20140108032402/http://www.marvell.com/embedded-processors/armada-375/
+    - Product Brief: https://web.archive.org/web/20131216023516/http://www.marvell.com/embedded-processors/armada-300/assets/ARMADA_375_SoC-01_product_brief.pdf
+
+  Core:
+	ARM Cortex-A9
+
+  Armada 38x Flavors:
+	- 88F6810	Armada 380
+	- 88F6811 Armada 381
+	- 88F6821 Armada 382
+	- 88F6W21 Armada 383
+	- 88F6820 Armada 385
+	- 88F6825
+	- 88F6828 Armada 388
+
+    - Product infos:   https://web.archive.org/web/20181006144616/http://www.marvell.com/embedded-processors/armada-38x/
+    - Functional Spec: https://web.archive.org/web/20200420191927/https://www.marvell.com/content/dam/marvell/en/public-collateral/embedded-processors/marvell-embedded-processors-armada-38x-functional-specifications-2015-11.pdf
+    - Hardware Spec:   https://web.archive.org/web/20180713105318/https://www.marvell.com/docs/embedded-processors/assets/marvell-embedded-processors-armada-38x-hardware-specifications-2017-03.pdf
+    - Design guide:    https://web.archive.org/web/20180712231737/https://www.marvell.com/docs/embedded-processors/assets/marvell-embedded-processors-armada-38x-hardware-design-guide-2017-08.pdf
+
+  Core:
+	ARM Cortex-A9
+
+  Armada 39x Flavors:
+	- 88F6920 Armada 390
+	- 88F6925 Armada 395
+	- 88F6928 Armada 398
+
+    - Product infos: https://web.archive.org/web/20181020222559/http://www.marvell.com/embedded-processors/armada-39x/
+
+  Core:
+	ARM Cortex-A9
+
+  Linux kernel mach directory:
+	arch/arm/mach-mvebu
+  Linux kernel plat directory:
+	none
+
+EBU Armada family ARMv8
+-----------------------
+
+  Armada 3710/3720 Flavors:
+	- 88F3710
+	- 88F3720
+
+  Core:
+	ARM Cortex A53 (ARMv8)
+
+  Homepage:
+	https://web.archive.org/web/20181103003602/http://www.marvell.com/embedded-processors/armada-3700/
+
+  Product Brief:
+	https://web.archive.org/web/20210121194810/https://www.marvell.com/content/dam/marvell/en/public-collateral/embedded-processors/marvell-embedded-processors-armada-37xx-product-brief-2016-01.pdf
+
+  Hardware Spec:
+	https://web.archive.org/web/20210202162011/http://www.marvell.com/content/dam/marvell/en/public-collateral/embedded-processors/marvell-embedded-processors-armada-37xx-hardware-specifications-2019-09.pdf
+
+  Device tree files:
+	arch/arm64/boot/dts/marvell/armada-37*
+
+  Armada 7K Flavors:
+	  - 88F6040 (AP806 Quad 600 MHz + one CP110)
+	  - 88F7020 (AP806 Dual + one CP110)
+	  - 88F7040 (AP806 Quad + one CP110)
+
+  Core: ARM Cortex A72
+
+  Homepage:
+	https://web.archive.org/web/20181020222606/http://www.marvell.com/embedded-processors/armada-70xx/
+
+  Product Brief:
+	  - https://web.archive.org/web/20161010105541/http://www.marvell.com/embedded-processors/assets/Armada7020PB-Jan2016.pdf
+	  - https://web.archive.org/web/20160928154533/http://www.marvell.com/embedded-processors/assets/Armada7040PB-Jan2016.pdf
+
+  Device tree files:
+	arch/arm64/boot/dts/marvell/armada-70*
+
+  Armada 8K Flavors:
+	- 88F8020 (AP806 Dual + two CP110)
+	- 88F8040 (AP806 Quad + two CP110)
+  Core:
+	ARM Cortex A72
+
+  Homepage:
+	https://web.archive.org/web/20181022004830/http://www.marvell.com/embedded-processors/armada-80xx/
+
+  Product Brief:
+	  - https://web.archive.org/web/20210124233728/https://www.marvell.com/content/dam/marvell/en/public-collateral/embedded-processors/marvell-embedded-processors-armada-8020-product-brief-2017-12.pdf
+	  - https://web.archive.org/web/20161010105532/http://www.marvell.com/embedded-processors/assets/Armada8040PB-Jan2016.pdf
+
+  Device tree files:
+	arch/arm64/boot/dts/marvell/armada-80*
+
+  Octeon TX2 CN913x Flavors:
+	- CN9130 (AP807 Quad + one internal CP115)
+	- CN9131 (AP807 Quad + one internal CP115 + one external CP115 / 88F8215)
+	- CN9132 (AP807 Quad + one internal CP115 + two external CP115 / 88F8215)
+
+  Core:
+	ARM Cortex A72
+
+  Homepage:
+	https://web.archive.org/web/20200803150818/https://www.marvell.com/products/infrastructure-processors/multi-core-processors/octeon-tx2/octeon-tx2-cn9130.html
+
+  Product Brief:
+	https://web.archive.org/web/20200803150818/https://www.marvell.com/content/dam/marvell/en/public-collateral/embedded-processors/marvell-infrastructure-processors-octeon-tx2-cn913x-product-brief-2020-02.pdf
+
+  Device tree files:
+	arch/arm64/boot/dts/marvell/cn913*
+
+Avanta family
+-------------
+
+  Flavors:
+       - 88F6500
+       - 88F6510
+       - 88F6530P
+       - 88F6550
+       - 88F6560
+       - 88F6601
+
+  Homepage:
+	https://web.archive.org/web/20181005145041/http://www.marvell.com/broadband/
+
+  Product Brief:
+	https://web.archive.org/web/20180829171057/http://www.marvell.com/broadband/assets/Marvell_Avanta_88F6510_305_060-001_product_brief.pdf
+
+  No public datasheet available.
+
+  Core:
+	ARMv5 compatible
+
+  Linux kernel mach directory:
+	no code in mainline yet, planned for the future
+  Linux kernel plat directory:
+	no code in mainline yet, planned for the future
+
+Storage family
+--------------
+
+  Armada SP:
+	- 88RC1580
+
+  Product infos:
+	https://web.archive.org/web/20191129073953/http://www.marvell.com/storage/armada-sp/
+
+  Core:
+	Sheeva ARMv7 compatible Quad-core PJ4C
+
+  (not supported in upstream Linux kernel)
+
+Dove family (application processor)
+-----------------------------------
+
+  Flavors:
+        - 88AP510 a.k.a Armada 510
+
+   Product Brief:
+	https://web.archive.org/web/20111102020643/http://www.marvell.com/application-processors/armada-500/assets/Marvell_Armada510_SoC.pdf
+
+   Hardware Spec:
+	https://web.archive.org/web/20160428160231/http://www.marvell.com/application-processors/armada-500/assets/Armada-510-Hardware-Spec.pdf
+
+  Functional Spec:
+	https://web.archive.org/web/20120130172443/http://www.marvell.com/application-processors/armada-500/assets/Armada-510-Functional-Spec.pdf
+
+  Homepage:
+	https://web.archive.org/web/20160822232651/http://www.marvell.com/application-processors/armada-500/
+
+  Core:
+	ARMv7 compatible
+
+  Directory:
+	- arch/arm/mach-mvebu (DT enabled platforms)
+        - arch/arm/mach-dove (non-DT enabled platforms)
+
+PXA 2xx/3xx/93x/95x family
+--------------------------
+
+  Flavors:
+        - PXA21x, PXA25x, PXA26x
+             - Application processor only
+             - Core: ARMv5 XScale1 core
+        - PXA270, PXA271, PXA272
+             - Product Brief         : https://web.archive.org/web/20150927135510/http://www.marvell.com/application-processors/pxa-family/assets/pxa_27x_pb.pdf
+             - Design guide          : https://web.archive.org/web/20120111181937/http://www.marvell.com/application-processors/pxa-family/assets/pxa_27x_design_guide.pdf
+             - Developers manual     : https://web.archive.org/web/20150927164805/http://www.marvell.com/application-processors/pxa-family/assets/pxa_27x_dev_man.pdf
+             - Specification         : https://web.archive.org/web/20140211221535/http://www.marvell.com/application-processors/pxa-family/assets/pxa_27x_emts.pdf
+             - Specification update  : https://web.archive.org/web/20120111104906/http://www.marvell.com/application-processors/pxa-family/assets/pxa_27x_spec_update.pdf
+             - Application processor only
+             - Core: ARMv5 XScale2 core
+        - PXA300, PXA310, PXA320
+             - PXA 300 Product Brief : https://web.archive.org/web/20120111121203/http://www.marvell.com/application-processors/pxa-family/assets/PXA300_PB_R4.pdf
+             - PXA 310 Product Brief : https://web.archive.org/web/20120111104515/http://www.marvell.com/application-processors/pxa-family/assets/PXA310_PB_R4.pdf
+             - PXA 320 Product Brief : https://web.archive.org/web/20121021182826/http://www.marvell.com/application-processors/pxa-family/assets/PXA320_PB_R4.pdf
+             - Design guide          : https://web.archive.org/web/20130727144625/http://www.marvell.com/application-processors/pxa-family/assets/PXA3xx_Design_Guide.pdf
+             - Developers manual     : https://web.archive.org/web/20130727144605/http://www.marvell.com/application-processors/pxa-family/assets/PXA3xx_Developers_Manual.zip
+             - Specifications        : https://web.archive.org/web/20130727144559/http://www.marvell.com/application-processors/pxa-family/assets/PXA3xx_EMTS.pdf
+             - Specification Update  : https://web.archive.org/web/20150927183411/http://www.marvell.com/application-processors/pxa-family/assets/PXA3xx_Spec_Update.zip
+             - Reference Manual      : https://web.archive.org/web/20120111103844/http://www.marvell.com/application-processors/pxa-family/assets/PXA3xx_TavorP_BootROM_Ref_Manual.pdf
+             - Application processor only
+             - Core: ARMv5 XScale3 core
+        - PXA930, PXA935
+             - Application processor with Communication processor
+             - Core: ARMv5 XScale3 core
+        - PXA955
+             - Application processor with Communication processor
+             - Core: ARMv7 compatible Sheeva PJ4 core
+
+   Comments:
+
+    * This line of SoCs originates from the XScale family developed by
+      Intel and acquired by Marvell in ~2006. The PXA21x, PXA25x,
+      PXA26x, PXA27x, PXA3xx and PXA93x were developed by Intel, while
+      the later PXA95x were developed by Marvell.
+
+    * Due to their XScale origin, these SoCs have virtually nothing in
+      common with the other (Kirkwood, Dove, etc.) families of Marvell
+      SoCs, except with the MMP/MMP2 family of SoCs.
+
+   Linux kernel mach directory:
+	arch/arm/mach-pxa
+
+MMP/MMP2/MMP3 family (communication processor)
+----------------------------------------------
+
+   Flavors:
+        - PXA168, a.k.a Armada 168
+             - Homepage             : https://web.archive.org/web/20110926014256/http://www.marvell.com/application-processors/armada-100/armada-168.jsp
+             - Product brief        : https://web.archive.org/web/20111102030100/http://www.marvell.com/application-processors/armada-100/assets/pxa_168_pb.pdf
+             - Hardware manual      : https://web.archive.org/web/20160428165359/http://www.marvell.com/application-processors/armada-100/assets/armada_16x_datasheet.pdf
+             - Software manual      : https://web.archive.org/web/20160428154454/http://www.marvell.com/application-processors/armada-100/assets/armada_16x_software_manual.pdf
+             - Specification update : https://web.archive.org/web/20150927160338/http://www.marvell.com/application-processors/armada-100/assets/ARMADA16x_Spec_update.pdf
+             - Boot ROM manual      : https://web.archive.org/web/20130727205559/http://www.marvell.com/application-processors/armada-100/assets/armada_16x_ref_manual.pdf
+             - App node package     : https://web.archive.org/web/20141005090706/http://www.marvell.com/application-processors/armada-100/assets/armada_16x_app_note_package.pdf
+             - Application processor only
+             - Core: ARMv5 compatible Marvell PJ1 88sv331 (Mohawk)
+        - PXA910/PXA920
+             - Homepage             : https://web.archive.org/web/20150928121236/http://www.marvell.com/communication-processors/pxa910/
+             - Product Brief        : https://archive.org/download/marvell-pxa910-pb/Marvell_PXA910_Platform-001_PB.pdf
+             - Application processor with Communication processor
+             - Core: ARMv5 compatible Marvell PJ1 88sv331 (Mohawk)
+        - PXA688, a.k.a. MMP2, a.k.a Armada 610 (OLPC XO-1.75)
+             - Product Brief        : https://web.archive.org/web/20111102023255/http://www.marvell.com/application-processors/armada-600/assets/armada610_pb.pdf
+             - Application processor only
+             - Core: ARMv7 compatible Sheeva PJ4 88sv581x core
+	- PXA2128, a.k.a. MMP3, a.k.a Armada 620 (OLPC XO-4)
+	     - Product Brief	    : https://web.archive.org/web/20120824055155/http://www.marvell.com/application-processors/armada/pxa2128/assets/Marvell-ARMADA-PXA2128-SoC-PB.pdf
+	     - Application processor only
+	     - Core: Dual-core ARMv7 compatible Sheeva PJ4C core
+	- PXA960/PXA968/PXA978 (Linux support not upstream)
+	     - Application processor with Communication Processor
+	     - Core: ARMv7 compatible Sheeva PJ4 core
+	- PXA986/PXA988 (Linux support not upstream)
+	     - Application processor with Communication Processor
+	     - Core: Dual-core ARMv7 compatible Sheeva PJ4B-MP core
+	- PXA1088/PXA1920 (Linux support not upstream)
+	     - Application processor with Communication Processor
+	     - Core: quad-core ARMv7 Cortex-A7
+	- PXA1908/PXA1928/PXA1936
+	     - Application processor with Communication Processor
+	     - Core: multi-core ARMv8 Cortex-A53
+
+   Comments:
+
+    * This line of SoCs originates from the XScale family developed by
+      Intel and acquired by Marvell in ~2006. All the processors of
+      this MMP/MMP2 family were developed by Marvell.
+
+    * Due to their XScale origin, these SoCs have virtually nothing in
+      common with the other (Kirkwood, Dove, etc.) families of Marvell
+      SoCs, except with the PXA family of SoCs listed above.
+
+   Linux kernel mach directory:
+	arch/arm/mach-mmp
+
+Berlin family (Multimedia Solutions)
+-------------------------------------
+
+  - Flavors:
+	- 88DE3010, Armada 1000 (no Linux support)
+		- Core:		Marvell PJ1 (ARMv5TE), Dual-core
+		- Product Brief:	https://web.archive.org/web/20131103162620/http://www.marvell.com/digital-entertainment/assets/armada_1000_pb.pdf
+	- 88DE3005, Armada 1500 Mini
+		- Design name:	BG2CD
+		- Core:		ARM Cortex-A9, PL310 L2CC
+	- 88DE3006, Armada 1500 Mini Plus
+		- Design name:	BG2CDP
+		- Core:		Dual Core ARM Cortex-A7
+	- 88DE3100, Armada 1500
+		- Design name:	BG2
+		- Core:		Marvell PJ4B-MP (ARMv7), Tauros3 L2CC
+	- 88DE3114, Armada 1500 Pro
+		- Design name:	BG2Q
+		- Core:		Quad Core ARM Cortex-A9, PL310 L2CC
+	- 88DE3214, Armada 1500 Pro 4K
+		- Design name:	BG3
+		- Core:		ARM Cortex-A15, CA15 integrated L2CC
+	- 88DE3218, ARMADA 1500 Ultra
+		- Core:		ARM Cortex-A53
+
+  Homepage: https://www.synaptics.com/products/multimedia-solutions
+  Directory: arch/arm/mach-berlin
+
+  Comments:
+
+   * This line of SoCs is based on Marvell Sheeva or ARM Cortex CPUs
+     with Synopsys DesignWare (IRQ, GPIO, Timers, ...) and PXA IP (SDHCI, USB, ETH, ...).
+
+   * The Berlin family was acquired by Synaptics from Marvell in 2017.
+
+CPU Cores
+---------
+
+The XScale cores were designed by Intel, and shipped by Marvell in the older
+PXA processors. Feroceon is a Marvell designed core that developed in-house,
+and that evolved into Sheeva. The XScale and Feroceon cores were phased out
+over time and replaced with Sheeva cores in later products, which subsequently
+got replaced with licensed ARM Cortex-A cores.
+
+  XScale 1
+	CPUID 0x69052xxx
+	ARMv5, iWMMXt
+  XScale 2
+	CPUID 0x69054xxx
+	ARMv5, iWMMXt
+  XScale 3
+	CPUID 0x69056xxx or 0x69056xxx
+	ARMv5, iWMMXt
+  Feroceon-1850 88fr331 "Mohawk"
+	CPUID 0x5615331x or 0x41xx926x
+	ARMv5TE, single issue
+  Feroceon-2850 88fr531-vd "Jolteon"
+	CPUID 0x5605531x or 0x41xx926x
+	ARMv5TE, VFP, dual-issue
+  Feroceon 88fr571-vd "Jolteon"
+	CPUID 0x5615571x
+	ARMv5TE, VFP, dual-issue
+  Feroceon 88fr131 "Mohawk-D"
+	CPUID 0x5625131x
+	ARMv5TE, single-issue in-order
+  Sheeva PJ1 88sv331 "Mohawk"
+	CPUID 0x561584xx
+	ARMv5, single-issue iWMMXt v2
+  Sheeva PJ4 88sv581x "Flareon"
+	CPUID 0x560f581x
+	ARMv7, idivt, optional iWMMXt v2
+  Sheeva PJ4B 88sv581x
+	CPUID 0x561f581x
+	ARMv7, idivt, optional iWMMXt v2
+  Sheeva PJ4B-MP / PJ4C
+	CPUID 0x562f584x
+	ARMv7, idivt/idiva, LPAE, optional iWMMXt v2 and/or NEON
+
+Long-term plans
+---------------
+
+ * Unify the mach-dove/, mach-mv78xx0/, mach-orion5x/ into the
+   mach-mvebu/ to support all SoCs from the Marvell EBU (Engineering
+   Business Unit) in a single mach-<foo> directory. The plat-orion/
+   would therefore disappear.
+
+Credits
+-------
+
+- Maen Suleiman <maen@marvell.com>
+- Lior Amsalem <alior@marvell.com>
+- Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+- Andrew Lunn <andrew@lunn.ch>
+- Nicolas Pitre <nico@fluxnic.net>
+- Eric Miao <eric.y.miao@gmail.com>
diff --git a/Documentation/arm/mem_alignment.rst b/Documentation/arm/mem_alignment.rst
new file mode 100644
index 000000000..aa22893b6
--- /dev/null
+++ b/Documentation/arm/mem_alignment.rst
@@ -0,0 +1,63 @@
+================
+Memory alignment
+================
+
+Too many problems popped up because of unnoticed misaligned memory access in
+kernel code lately.  Therefore the alignment fixup is now unconditionally
+configured in for SA11x0 based targets.  According to Alan Cox, this is a
+bad idea to configure it out, but Russell King has some good reasons for
+doing so on some f***ed up ARM architectures like the EBSA110.  However
+this is not the case on many design I'm aware of, like all SA11x0 based
+ones.
+
+Of course this is a bad idea to rely on the alignment trap to perform
+unaligned memory access in general.  If those access are predictable, you
+are better to use the macros provided by include/asm/unaligned.h.  The
+alignment trap can fixup misaligned access for the exception cases, but at
+a high performance cost.  It better be rare.
+
+Now for user space applications, it is possible to configure the alignment
+trap to SIGBUS any code performing unaligned access (good for debugging bad
+code), or even fixup the access by software like for kernel code.  The later
+mode isn't recommended for performance reasons (just think about the
+floating point emulation that works about the same way).  Fix your code
+instead!
+
+Please note that randomly changing the behaviour without good thought is
+real bad - it changes the behaviour of all unaligned instructions in user
+space, and might cause programs to fail unexpectedly.
+
+To change the alignment trap behavior, simply echo a number into
+/proc/cpu/alignment.  The number is made up from various bits:
+
+===		========================================================
+bit		behavior when set
+===		========================================================
+0		A user process performing an unaligned memory access
+		will cause the kernel to print a message indicating
+		process name, pid, pc, instruction, address, and the
+		fault code.
+
+1		The kernel will attempt to fix up the user process
+		performing the unaligned access.  This is of course
+		slow (think about the floating point emulator) and
+		not recommended for production use.
+
+2		The kernel will send a SIGBUS signal to the user process
+		performing the unaligned access.
+===		========================================================
+
+Note that not all combinations are supported - only values 0 through 5.
+(6 and 7 don't make sense).
+
+For example, the following will turn on the warnings, but without
+fixing up or sending SIGBUS signals::
+
+	echo 1 > /proc/cpu/alignment
+
+You can also read the content of the same file to get statistical
+information on unaligned access occurrences plus the current mode of
+operation for user space code.
+
+
+Nicolas Pitre, Mar 13, 2001.  Modified Russell King, Nov 30, 2001.
diff --git a/Documentation/arm/memory.rst b/Documentation/arm/memory.rst
new file mode 100644
index 000000000..0cb1e2938
--- /dev/null
+++ b/Documentation/arm/memory.rst
@@ -0,0 +1,103 @@
+=================================
+Kernel Memory Layout on ARM Linux
+=================================
+
+		Russell King <rmk@arm.linux.org.uk>
+
+		     November 17, 2005 (2.6.15)
+
+This document describes the virtual memory layout which the Linux
+kernel uses for ARM processors.  It indicates which regions are
+free for platforms to use, and which are used by generic code.
+
+The ARM CPU is capable of addressing a maximum of 4GB virtual memory
+space, and this must be shared between user space processes, the
+kernel, and hardware devices.
+
+As the ARM architecture matures, it becomes necessary to reserve
+certain regions of VM space for use for new facilities; therefore
+this document may reserve more VM space over time.
+
+=============== =============== ===============================================
+Start		End		Use
+=============== =============== ===============================================
+ffff8000	ffffffff	copy_user_page / clear_user_page use.
+				For SA11xx and Xscale, this is used to
+				setup a minicache mapping.
+
+ffff4000	ffffffff	cache aliasing on ARMv6 and later CPUs.
+
+ffff1000	ffff7fff	Reserved.
+				Platforms must not use this address range.
+
+ffff0000	ffff0fff	CPU vector page.
+				The CPU vectors are mapped here if the
+				CPU supports vector relocation (control
+				register V bit.)
+
+fffe0000	fffeffff	XScale cache flush area.  This is used
+				in proc-xscale.S to flush the whole data
+				cache. (XScale does not have TCM.)
+
+fffe8000	fffeffff	DTCM mapping area for platforms with
+				DTCM mounted inside the CPU.
+
+fffe0000	fffe7fff	ITCM mapping area for platforms with
+				ITCM mounted inside the CPU.
+
+ffc80000	ffefffff	Fixmap mapping region.  Addresses provided
+				by fix_to_virt() will be located here.
+
+ffc00000	ffc7ffff	Guard region
+
+ff800000	ffbfffff	Permanent, fixed read-only mapping of the
+				firmware provided DT blob
+
+fee00000	feffffff	Mapping of PCI I/O space. This is a static
+				mapping within the vmalloc space.
+
+VMALLOC_START	VMALLOC_END-1	vmalloc() / ioremap() space.
+				Memory returned by vmalloc/ioremap will
+				be dynamically placed in this region.
+				Machine specific static mappings are also
+				located here through iotable_init().
+				VMALLOC_START is based upon the value
+				of the high_memory variable, and VMALLOC_END
+				is equal to 0xff800000.
+
+PAGE_OFFSET	high_memory-1	Kernel direct-mapped RAM region.
+				This maps the platforms RAM, and typically
+				maps all platform RAM in a 1:1 relationship.
+
+PKMAP_BASE	PAGE_OFFSET-1	Permanent kernel mappings
+				One way of mapping HIGHMEM pages into kernel
+				space.
+
+MODULES_VADDR	MODULES_END-1	Kernel module space
+				Kernel modules inserted via insmod are
+				placed here using dynamic mappings.
+
+TASK_SIZE	MODULES_VADDR-1	KASAn shadow memory when KASan is in use.
+				The range from MODULES_VADDR to the top
+				of the memory is shadowed here with 1 bit
+				per byte of memory.
+
+00001000	TASK_SIZE-1	User space mappings
+				Per-thread mappings are placed here via
+				the mmap() system call.
+
+00000000	00000fff	CPU vector page / null pointer trap
+				CPUs which do not support vector remapping
+				place their vector page here.  NULL pointer
+				dereferences by both the kernel and user
+				space are also caught via this mapping.
+=============== =============== ===============================================
+
+Please note that mappings which collide with the above areas may result
+in a non-bootable kernel, or may cause the kernel to (eventually) panic
+at run time.
+
+Since future CPUs may impact the kernel mapping layout, user programs
+must not access any memory which is not mapped inside their 0x0001000
+to TASK_SIZE address range.  If they wish to access these areas, they
+must set up their own mappings using open() and mmap().
diff --git a/Documentation/arm/microchip.rst b/Documentation/arm/microchip.rst
new file mode 100644
index 000000000..e721d855f
--- /dev/null
+++ b/Documentation/arm/microchip.rst
@@ -0,0 +1,230 @@
+=============================
+ARM Microchip SoCs (aka AT91)
+=============================
+
+
+Introduction
+------------
+This document gives useful information about the ARM Microchip SoCs that are
+currently supported in Linux Mainline (you know, the one on kernel.org).
+
+It is important to note that the Microchip (previously Atmel) ARM-based MPU
+product line is historically named "AT91" or "at91" throughout the Linux kernel
+development process even if this product prefix has completely disappeared from
+the official Microchip product name. Anyway, files, directories, git trees,
+git branches/tags and email subject always contain this "at91" sub-string.
+
+
+AT91 SoCs
+---------
+Documentation and detailed datasheet for each product are available on
+the Microchip website: http://www.microchip.com.
+
+  Flavors:
+    * ARM 920 based SoC
+      - at91rm9200
+
+          * Datasheet
+
+          http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-1768-32-bit-ARM920T-Embedded-Microprocessor-AT91RM9200_Datasheet.pdf
+
+    * ARM 926 based SoCs
+      - at91sam9260
+
+          * Datasheet
+
+          http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-6221-32-bit-ARM926EJ-S-Embedded-Microprocessor-SAM9260_Datasheet.pdf
+
+      - at91sam9xe
+
+          * Datasheet
+
+          http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-6254-32-bit-ARM926EJ-S-Embedded-Microprocessor-SAM9XE_Datasheet.pdf
+
+      - at91sam9261
+
+          * Datasheet
+
+          http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-6062-ARM926EJ-S-Microprocessor-SAM9261_Datasheet.pdf
+
+      - at91sam9263
+
+          * Datasheet
+
+          http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-6249-32-bit-ARM926EJ-S-Embedded-Microprocessor-SAM9263_Datasheet.pdf
+
+      - at91sam9rl
+
+          * Datasheet
+
+          http://ww1.microchip.com/downloads/en/DeviceDoc/doc6289.pdf
+
+      - at91sam9g20
+
+          * Datasheet
+
+          http://ww1.microchip.com/downloads/en/DeviceDoc/DS60001516A.pdf
+
+      - at91sam9g45 family
+        - at91sam9g45
+        - at91sam9g46
+        - at91sam9m10
+        - at91sam9m11 (device superset)
+
+          * Datasheet
+
+          http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-6437-32-bit-ARM926-Embedded-Microprocessor-SAM9M11_Datasheet.pdf
+
+      - at91sam9x5 family (aka "The 5 series")
+        - at91sam9g15
+        - at91sam9g25
+        - at91sam9g35
+        - at91sam9x25
+        - at91sam9x35
+
+          * Datasheet (can be considered as covering the whole family)
+
+          http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-11055-32-bit-ARM926EJ-S-Microcontroller-SAM9X35_Datasheet.pdf
+
+      - at91sam9n12
+
+          * Datasheet
+
+          http://ww1.microchip.com/downloads/en/DeviceDoc/DS60001517A.pdf
+
+      - sam9x60
+
+          * Datasheet
+
+          http://ww1.microchip.com/downloads/en/DeviceDoc/SAM9X60-Data-Sheet-DS60001579A.pdf
+
+    * ARM Cortex-A5 based SoCs
+      - sama5d3 family
+
+        - sama5d31
+        - sama5d33
+        - sama5d34
+        - sama5d35
+        - sama5d36 (device superset)
+
+          * Datasheet
+
+          http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-11121-32-bit-Cortex-A5-Microcontroller-SAMA5D3_Datasheet_B.pdf
+
+    * ARM Cortex-A5 + NEON based SoCs
+      - sama5d4 family
+
+        - sama5d41
+        - sama5d42
+        - sama5d43
+        - sama5d44 (device superset)
+
+          * Datasheet
+
+          http://ww1.microchip.com/downloads/en/DeviceDoc/60001525A.pdf
+
+      - sama5d2 family
+
+        - sama5d21
+        - sama5d22
+        - sama5d23
+        - sama5d24
+        - sama5d26
+        - sama5d27 (device superset)
+        - sama5d28 (device superset + environmental monitors)
+
+          * Datasheet
+
+          http://ww1.microchip.com/downloads/en/DeviceDoc/DS60001476B.pdf
+
+    * ARM Cortex-A7 based SoCs
+      - sama7g5 family
+
+        - sama7g51
+        - sama7g52
+        - sama7g53
+        - sama7g54 (device superset)
+
+          * Datasheet
+
+          Coming soon
+
+      - lan966 family
+        - lan9662
+        - lan9668
+
+          * Datasheet
+
+          Coming soon
+
+    * ARM Cortex-M7 MCUs
+      - sams70 family
+
+        - sams70j19
+        - sams70j20
+        - sams70j21
+        - sams70n19
+        - sams70n20
+        - sams70n21
+        - sams70q19
+        - sams70q20
+        - sams70q21
+
+      - samv70 family
+
+        - samv70j19
+        - samv70j20
+        - samv70n19
+        - samv70n20
+        - samv70q19
+        - samv70q20
+
+      - samv71 family
+
+        - samv71j19
+        - samv71j20
+        - samv71j21
+        - samv71n19
+        - samv71n20
+        - samv71n21
+        - samv71q19
+        - samv71q20
+        - samv71q21
+
+          * Datasheet
+
+          http://ww1.microchip.com/downloads/en/DeviceDoc/SAM-E70-S70-V70-V71-Family-Data-Sheet-DS60001527D.pdf
+
+
+Linux kernel information
+------------------------
+Linux kernel mach directory: arch/arm/mach-at91
+MAINTAINERS entry is: "ARM/Microchip (AT91) SoC support"
+
+
+Device Tree for AT91 SoCs and boards
+------------------------------------
+All AT91 SoCs are converted to Device Tree. Since Linux 3.19, these products
+must use this method to boot the Linux kernel.
+
+Work In Progress statement:
+Device Tree files and Device Tree bindings that apply to AT91 SoCs and boards are
+considered as "Unstable". To be completely clear, any at91 binding can change at
+any time. So, be sure to use a Device Tree Binary and a Kernel Image generated from
+the same source tree.
+Please refer to the Documentation/devicetree/bindings/ABI.rst file for a
+definition of a "Stable" binding/ABI.
+This statement will be removed by AT91 MAINTAINERS when appropriate.
+
+Naming conventions and best practice:
+
+- SoCs Device Tree Source Include files are named after the official name of
+  the product (at91sam9g20.dtsi or sama5d33.dtsi for instance).
+- Device Tree Source Include files (.dtsi) are used to collect common nodes that can be
+  shared across SoCs or boards (sama5d3.dtsi or at91sam9x5cm.dtsi for instance).
+  When collecting nodes for a particular peripheral or topic, the identifier have to
+  be placed at the end of the file name, separated with a "_" (at91sam9x5_can.dtsi
+  or sama5d3_gmac.dtsi for example).
+- board Device Tree Source files (.dts) are prefixed by the string "at91-" so
+  that they can be identified easily. Note that some files are historical exceptions
+  to this rule (sama5d3[13456]ek.dts, usb_a9g20.dts or animeo_ip.dts for example).
diff --git a/Documentation/arm/netwinder.rst b/Documentation/arm/netwinder.rst
new file mode 100644
index 000000000..8eab66caa
--- /dev/null
+++ b/Documentation/arm/netwinder.rst
@@ -0,0 +1,85 @@
+================================
+NetWinder specific documentation
+================================
+
+The NetWinder is a small low-power computer, primarily designed
+to run Linux.  It is based around the StrongARM RISC processor,
+DC21285 PCI bridge, with PC-type hardware glued around it.
+
+Port usage
+==========
+
+=======  ====== ===============================
+Min      Max	Description
+=======  ====== ===============================
+0x0000   0x000f	DMA1
+0x0020   0x0021	PIC1
+0x0060   0x006f	Keyboard
+0x0070   0x007f	RTC
+0x0080   0x0087	DMA1
+0x0088   0x008f	DMA2
+0x00a0   0x00a3	PIC2
+0x00c0   0x00df	DMA2
+0x0180   0x0187	IRDA
+0x01f0   0x01f6	ide0
+0x0201		Game port
+0x0203		RWA010 configuration read
+0x0220   ?	SoundBlaster
+0x0250   ?	WaveArtist
+0x0279		RWA010 configuration index
+0x02f8   0x02ff	Serial ttyS1
+0x0300   0x031f	Ether10
+0x0338		GPIO1
+0x033a		GPIO2
+0x0370   0x0371	W83977F configuration registers
+0x0388   ?	AdLib
+0x03c0   0x03df	VGA
+0x03f6		ide0
+0x03f8   0x03ff	Serial ttyS0
+0x0400   0x0408	DC21143
+0x0480   0x0487	DMA1
+0x0488   0x048f	DMA2
+0x0a79		RWA010 configuration write
+0xe800   0xe80f	ide0/ide1 BM DMA
+=======  ====== ===============================
+
+
+Interrupt usage
+===============
+
+======= ======= ========================
+IRQ	type	Description
+======= ======= ========================
+ 0	ISA	100Hz timer
+ 1	ISA	Keyboard
+ 2	ISA	cascade
+ 3	ISA	Serial ttyS1
+ 4	ISA	Serial ttyS0
+ 5	ISA	PS/2 mouse
+ 6	ISA	IRDA
+ 7	ISA	Printer
+ 8	ISA	RTC alarm
+ 9	ISA
+10	ISA	GP10 (Orange reset button)
+11	ISA
+12	ISA	WaveArtist
+13	ISA
+14	ISA	hda1
+15	ISA
+======= ======= ========================
+
+DMA usage
+=========
+
+======= ======= ===========
+DMA	type	Description
+======= ======= ===========
+ 0	ISA	IRDA
+ 1	ISA
+ 2	ISA	cascade
+ 3	ISA	WaveArtist
+ 4	ISA
+ 5	ISA
+ 6	ISA
+ 7	ISA	WaveArtist
+======= ======= ===========
diff --git a/Documentation/arm/nwfpe/index.rst b/Documentation/arm/nwfpe/index.rst
new file mode 100644
index 000000000..3c4d2f9aa
--- /dev/null
+++ b/Documentation/arm/nwfpe/index.rst
@@ -0,0 +1,13 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===================================
+NetWinder's floating point emulator
+===================================
+
+.. toctree::
+   :maxdepth: 1
+
+   nwfpe
+   netwinder-fpe
+   notes
+   todo
diff --git a/Documentation/arm/nwfpe/netwinder-fpe.rst b/Documentation/arm/nwfpe/netwinder-fpe.rst
new file mode 100644
index 000000000..cbb320960
--- /dev/null
+++ b/Documentation/arm/nwfpe/netwinder-fpe.rst
@@ -0,0 +1,162 @@
+=============
+Current State
+=============
+
+The following describes the current state of the NetWinder's floating point
+emulator.
+
+In the following nomenclature is used to describe the floating point
+instructions.  It follows the conventions in the ARM manual.
+
+::
+
+  <S|D|E> = <single|double|extended>, no default
+  {P|M|Z} = {round to +infinity,round to -infinity,round to zero},
+            default = round to nearest
+
+Note: items enclosed in {} are optional.
+
+Floating Point Coprocessor Data Transfer Instructions (CPDT)
+------------------------------------------------------------
+
+LDF/STF - load and store floating
+
+<LDF|STF>{cond}<S|D|E> Fd, Rn
+<LDF|STF>{cond}<S|D|E> Fd, [Rn, #<expression>]{!}
+<LDF|STF>{cond}<S|D|E> Fd, [Rn], #<expression>
+
+These instructions are fully implemented.
+
+LFM/SFM - load and store multiple floating
+
+Form 1 syntax:
+<LFM|SFM>{cond}<S|D|E> Fd, <count>, [Rn]
+<LFM|SFM>{cond}<S|D|E> Fd, <count>, [Rn, #<expression>]{!}
+<LFM|SFM>{cond}<S|D|E> Fd, <count>, [Rn], #<expression>
+
+Form 2 syntax:
+<LFM|SFM>{cond}<FD,EA> Fd, <count>, [Rn]{!}
+
+These instructions are fully implemented.  They store/load three words
+for each floating point register into the memory location given in the
+instruction.  The format in memory is unlikely to be compatible with
+other implementations, in particular the actual hardware.  Specific
+mention of this is made in the ARM manuals.
+
+Floating Point Coprocessor Register Transfer Instructions (CPRT)
+----------------------------------------------------------------
+
+Conversions, read/write status/control register instructions
+
+FLT{cond}<S,D,E>{P,M,Z} Fn, Rd          Convert integer to floating point
+FIX{cond}{P,M,Z} Rd, Fn                 Convert floating point to integer
+WFS{cond} Rd                            Write floating point status register
+RFS{cond} Rd                            Read floating point status register
+WFC{cond} Rd                            Write floating point control register
+RFC{cond} Rd                            Read floating point control register
+
+FLT/FIX are fully implemented.
+
+RFS/WFS are fully implemented.
+
+RFC/WFC are fully implemented.  RFC/WFC are supervisor only instructions, and
+presently check the CPU mode, and do an invalid instruction trap if not called
+from supervisor mode.
+
+Compare instructions
+
+CMF{cond} Fn, Fm        Compare floating
+CMFE{cond} Fn, Fm       Compare floating with exception
+CNF{cond} Fn, Fm        Compare negated floating
+CNFE{cond} Fn, Fm       Compare negated floating with exception
+
+These are fully implemented.
+
+Floating Point Coprocessor Data Instructions (CPDT)
+---------------------------------------------------
+
+Dyadic operations:
+
+ADF{cond}<S|D|E>{P,M,Z} Fd, Fn, <Fm,#value> - add
+SUF{cond}<S|D|E>{P,M,Z} Fd, Fn, <Fm,#value> - subtract
+RSF{cond}<S|D|E>{P,M,Z} Fd, Fn, <Fm,#value> - reverse subtract
+MUF{cond}<S|D|E>{P,M,Z} Fd, Fn, <Fm,#value> - multiply
+DVF{cond}<S|D|E>{P,M,Z} Fd, Fn, <Fm,#value> - divide
+RDV{cond}<S|D|E>{P,M,Z} Fd, Fn, <Fm,#value> - reverse divide
+
+These are fully implemented.
+
+FML{cond}<S|D|E>{P,M,Z} Fd, Fn, <Fm,#value> - fast multiply
+FDV{cond}<S|D|E>{P,M,Z} Fd, Fn, <Fm,#value> - fast divide
+FRD{cond}<S|D|E>{P,M,Z} Fd, Fn, <Fm,#value> - fast reverse divide
+
+These are fully implemented as well.  They use the same algorithm as the
+non-fast versions.  Hence, in this implementation their performance is
+equivalent to the MUF/DVF/RDV instructions.  This is acceptable according
+to the ARM manual.  The manual notes these are defined only for single
+operands, on the actual FPA11 hardware they do not work for double or
+extended precision operands.  The emulator currently does not check
+the requested permissions conditions, and performs the requested operation.
+
+RMF{cond}<S|D|E>{P,M,Z} Fd, Fn, <Fm,#value> - IEEE remainder
+
+This is fully implemented.
+
+Monadic operations:
+
+MVF{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - move
+MNF{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - move negated
+
+These are fully implemented.
+
+ABS{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - absolute value
+SQT{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - square root
+RND{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - round
+
+These are fully implemented.
+
+URD{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - unnormalized round
+NRM{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - normalize
+
+These are implemented.  URD is implemented using the same code as the RND
+instruction.  Since URD cannot return a unnormalized number, NRM becomes
+a NOP.
+
+Library calls:
+
+POW{cond}<S|D|E>{P,M,Z} Fd, Fn, <Fm,#value> - power
+RPW{cond}<S|D|E>{P,M,Z} Fd, Fn, <Fm,#value> - reverse power
+POL{cond}<S|D|E>{P,M,Z} Fd, Fn, <Fm,#value> - polar angle (arctan2)
+
+LOG{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - logarithm to base 10
+LGN{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - logarithm to base e
+EXP{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - exponent
+SIN{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - sine
+COS{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - cosine
+TAN{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - tangent
+ASN{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - arcsine
+ACS{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - arccosine
+ATN{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - arctangent
+
+These are not implemented.  They are not currently issued by the compiler,
+and are handled by routines in libc.  These are not implemented by the FPA11
+hardware, but are handled by the floating point support code.  They should
+be implemented in future versions.
+
+Signalling:
+
+Signals are implemented.  However current ELF kernels produced by Rebel.com
+have a bug in them that prevents the module from generating a SIGFPE.  This
+is caused by a failure to alias fp_current to the kernel variable
+current_set[0] correctly.
+
+The kernel provided with this distribution (vmlinux-nwfpe-0.93) contains
+a fix for this problem and also incorporates the current version of the
+emulator directly.  It is possible to run with no floating point module
+loaded with this kernel.  It is provided as a demonstration of the
+technology and for those who want to do floating point work that depends
+on signals.  It is not strictly necessary to use the module.
+
+A module (either the one provided by Russell King, or the one in this
+distribution) can be loaded to replace the functionality of the emulator
+built into the kernel.
diff --git a/Documentation/arm/nwfpe/notes.rst b/Documentation/arm/nwfpe/notes.rst
new file mode 100644
index 000000000..102e55af8
--- /dev/null
+++ b/Documentation/arm/nwfpe/notes.rst
@@ -0,0 +1,32 @@
+Notes
+=====
+
+There seems to be a problem with exp(double) and our emulator.  I haven't
+been able to track it down yet.  This does not occur with the emulator
+supplied by Russell King.
+
+I also found one oddity in the emulator.  I don't think it is serious but
+will point it out.  The ARM calling conventions require floating point
+registers f4-f7 to be preserved over a function call.  The compiler quite
+often uses an stfe instruction to save f4 on the stack upon entry to a
+function, and an ldfe instruction to restore it before returning.
+
+I was looking at some code, that calculated a double result, stored it in f4
+then made a function call. Upon return from the function call the number in
+f4 had been converted to an extended value in the emulator.
+
+This is a side effect of the stfe instruction.  The double in f4 had to be
+converted to extended, then stored.  If an lfm/sfm combination had been used,
+then no conversion would occur.  This has performance considerations.  The
+result from the function call and f4 were used in a multiplication.  If the
+emulator sees a multiply of a double and extended, it promotes the double to
+extended, then does the multiply in extended precision.
+
+This code will cause this problem:
+
+double x, y, z;
+z = log(x)/log(y);
+
+The result of log(x) (a double) will be calculated, returned in f0, then
+moved to f4 to preserve it over the log(y) call.  The division will be done
+in extended precision, due to the stfe instruction used to save f4 in log(y).
diff --git a/Documentation/arm/nwfpe/nwfpe.rst b/Documentation/arm/nwfpe/nwfpe.rst
new file mode 100644
index 000000000..35cd90dac
--- /dev/null
+++ b/Documentation/arm/nwfpe/nwfpe.rst
@@ -0,0 +1,74 @@
+Introduction
+============
+
+This directory contains the version 0.92 test release of the NetWinder
+Floating Point Emulator.
+
+The majority of the code was written by me, Scott Bambrough It is
+written in C, with a small number of routines in inline assembler
+where required.  It was written quickly, with a goal of implementing a
+working version of all the floating point instructions the compiler
+emits as the first target.  I have attempted to be as optimal as
+possible, but there remains much room for improvement.
+
+I have attempted to make the emulator as portable as possible.  One of
+the problems is with leading underscores on kernel symbols.  Elf
+kernels have no leading underscores, a.out compiled kernels do.  I
+have attempted to use the C_SYMBOL_NAME macro wherever this may be
+important.
+
+Another choice I made was in the file structure.  I have attempted to
+contain all operating system specific code in one module (fpmodule.*).
+All the other files contain emulator specific code.  This should allow
+others to port the emulator to NetBSD for instance relatively easily.
+
+The floating point operations are based on SoftFloat Release 2, by
+John Hauser.  SoftFloat is a software implementation of floating-point
+that conforms to the IEC/IEEE Standard for Binary Floating-point
+Arithmetic.  As many as four formats are supported: single precision,
+double precision, extended double precision, and quadruple precision.
+All operations required by the standard are implemented, except for
+conversions to and from decimal.  We use only the single precision,
+double precision and extended double precision formats.  The port of
+SoftFloat to the ARM was done by Phil Blundell, based on an earlier
+port of SoftFloat version 1 by Neil Carson for NetBSD/arm32.
+
+The file README.FPE contains a description of what has been implemented
+so far in the emulator.  The file TODO contains a information on what
+remains to be done, and other ideas for the emulator.
+
+Bug reports, comments, suggestions should be directed to me at
+<scottb@netwinder.org>.  General reports of "this program doesn't
+work correctly when your emulator is installed" are useful for
+determining that bugs still exist; but are virtually useless when
+attempting to isolate the problem.  Please report them, but don't
+expect quick action.  Bugs still exist.  The problem remains in isolating
+which instruction contains the bug.  Small programs illustrating a specific
+problem are a godsend.
+
+Legal Notices
+-------------
+
+The NetWinder Floating Point Emulator is free software.  Everything Rebel.com
+has written is provided under the GNU GPL.  See the file COPYING for copying
+conditions.  Excluded from the above is the SoftFloat code.  John Hauser's
+legal notice for SoftFloat is included below.
+
+-------------------------------------------------------------------------------
+
+SoftFloat Legal Notice
+
+SoftFloat was written by John R. Hauser.  This work was made possible in
+part by the International Computer Science Institute, located at Suite 600,
+1947 Center Street, Berkeley, California 94704.  Funding was partially
+provided by the National Science Foundation under grant MIP-9311980.  The
+original version of this code was written as part of a project to build
+a fixed-point vector processor in collaboration with the University of
+California at Berkeley, overseen by Profs. Nelson Morgan and John Wawrzynek.
+
+THIS SOFTWARE IS DISTRIBUTED AS IS, FOR FREE.  Although reasonable effort
+has been made to avoid it, THIS SOFTWARE MAY CONTAIN FAULTS THAT WILL AT
+TIMES RESULT IN INCORRECT BEHAVIOR.  USE OF THIS SOFTWARE IS RESTRICTED TO
+PERSONS AND ORGANIZATIONS WHO CAN AND WILL TAKE FULL RESPONSIBILITY FOR ANY
+AND ALL LOSSES, COSTS, OR OTHER PROBLEMS ARISING FROM ITS USE.
+-------------------------------------------------------------------------------
diff --git a/Documentation/arm/nwfpe/todo.rst b/Documentation/arm/nwfpe/todo.rst
new file mode 100644
index 000000000..393f11b14
--- /dev/null
+++ b/Documentation/arm/nwfpe/todo.rst
@@ -0,0 +1,72 @@
+TODO LIST
+=========
+
+::
+
+  POW{cond}<S|D|E>{P,M,Z} Fd, Fn, <Fm,#value> - power
+  RPW{cond}<S|D|E>{P,M,Z} Fd, Fn, <Fm,#value> - reverse power
+  POL{cond}<S|D|E>{P,M,Z} Fd, Fn, <Fm,#value> - polar angle (arctan2)
+
+  LOG{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - logarithm to base 10
+  LGN{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - logarithm to base e
+  EXP{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - exponent
+  SIN{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - sine
+  COS{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - cosine
+  TAN{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - tangent
+  ASN{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - arcsine
+  ACS{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - arccosine
+  ATN{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - arctangent
+
+These are not implemented.  They are not currently issued by the compiler,
+and are handled by routines in libc.  These are not implemented by the FPA11
+hardware, but are handled by the floating point support code.  They should
+be implemented in future versions.
+
+There are a couple of ways to approach the implementation of these.  One
+method would be to use accurate table methods for these routines.  I have
+a couple of papers by S. Gal from IBM's research labs in Haifa, Israel that
+seem to promise extreme accuracy (in the order of 99.8%) and reasonable speed.
+These methods are used in GLIBC for some of the transcendental functions.
+
+Another approach, which I know little about is CORDIC.  This stands for
+Coordinate Rotation Digital Computer, and is a method of computing
+transcendental functions using mostly shifts and adds and a few
+multiplications and divisions.  The ARM excels at shifts and adds,
+so such a method could be promising, but requires more research to
+determine if it is feasible.
+
+Rounding Methods
+----------------
+
+The IEEE standard defines 4 rounding modes.  Round to nearest is the
+default, but rounding to + or - infinity or round to zero are also allowed.
+Many architectures allow the rounding mode to be specified by modifying bits
+in a control register.  Not so with the ARM FPA11 architecture.  To change
+the rounding mode one must specify it with each instruction.
+
+This has made porting some benchmarks difficult.  It is possible to
+introduce such a capability into the emulator.  The FPCR contains
+bits describing the rounding mode.  The emulator could be altered to
+examine a flag, which if set forced it to ignore the rounding mode in
+the instruction, and use the mode specified in the bits in the FPCR.
+
+This would require a method of getting/setting the flag, and the bits
+in the FPCR.  This requires a kernel call in ArmLinux, as WFC/RFC are
+supervisor only instructions.  If anyone has any ideas or comments I
+would like to hear them.
+
+NOTE:
+ pulled out from some docs on ARM floating point, specifically
+ for the Acorn FPE, but not limited to it:
+
+ The floating point control register (FPCR) may only be present in some
+ implementations: it is there to control the hardware in an implementation-
+ specific manner, for example to disable the floating point system.  The user
+ mode of the ARM is not permitted to use this register (since the right is
+ reserved to alter it between implementations) and the WFC and RFC
+ instructions will trap if tried in user mode.
+
+ Hence, the answer is yes, you could do this, but then you will run a high
+ risk of becoming isolated if and when hardware FP emulation comes out
+
+		-- Russell.
diff --git a/Documentation/arm/omap/dss.rst b/Documentation/arm/omap/dss.rst
new file mode 100644
index 000000000..a40c4d9c7
--- /dev/null
+++ b/Documentation/arm/omap/dss.rst
@@ -0,0 +1,372 @@
+=========================
+OMAP2/3 Display Subsystem
+=========================
+
+This is an almost total rewrite of the OMAP FB driver in drivers/video/omap
+(let's call it DSS1). The main differences between DSS1 and DSS2 are DSI,
+TV-out and multiple display support, but there are lots of small improvements
+also.
+
+The DSS2 driver (omapdss module) is in arch/arm/plat-omap/dss/, and the FB,
+panel and controller drivers are in drivers/video/omap2/. DSS1 and DSS2 live
+currently side by side, you can choose which one to use.
+
+Features
+--------
+
+Working and tested features include:
+
+- MIPI DPI (parallel) output
+- MIPI DSI output in command mode
+- MIPI DBI (RFBI) output
+- SDI output
+- TV output
+- All pieces can be compiled as a module or inside kernel
+- Use DISPC to update any of the outputs
+- Use CPU to update RFBI or DSI output
+- OMAP DISPC planes
+- RGB16, RGB24 packed, RGB24 unpacked
+- YUV2, UYVY
+- Scaling
+- Adjusting DSS FCK to find a good pixel clock
+- Use DSI DPLL to create DSS FCK
+
+Tested boards include:
+- OMAP3 SDP board
+- Beagle board
+- N810
+
+omapdss driver
+--------------
+
+The DSS driver does not itself have any support for Linux framebuffer, V4L or
+such like the current ones, but it has an internal kernel API that upper level
+drivers can use.
+
+The DSS driver models OMAP's overlays, overlay managers and displays in a
+flexible way to enable non-common multi-display configuration. In addition to
+modelling the hardware overlays, omapdss supports virtual overlays and overlay
+managers. These can be used when updating a display with CPU or system DMA.
+
+omapdss driver support for audio
+--------------------------------
+There exist several display technologies and standards that support audio as
+well. Hence, it is relevant to update the DSS device driver to provide an audio
+interface that may be used by an audio driver or any other driver interested in
+the functionality.
+
+The audio_enable function is intended to prepare the relevant
+IP for playback (e.g., enabling an audio FIFO, taking in/out of reset
+some IP, enabling companion chips, etc). It is intended to be called before
+audio_start. The audio_disable function performs the reverse operation and is
+intended to be called after audio_stop.
+
+While a given DSS device driver may support audio, it is possible that for
+certain configurations audio is not supported (e.g., an HDMI display using a
+VESA video timing). The audio_supported function is intended to query whether
+the current configuration of the display supports audio.
+
+The audio_config function is intended to configure all the relevant audio
+parameters of the display. In order to make the function independent of any
+specific DSS device driver, a struct omap_dss_audio is defined. Its purpose
+is to contain all the required parameters for audio configuration. At the
+moment, such structure contains pointers to IEC-60958 channel status word
+and CEA-861 audio infoframe structures. This should be enough to support
+HDMI and DisplayPort, as both are based on CEA-861 and IEC-60958.
+
+The audio_enable/disable, audio_config and audio_supported functions could be
+implemented as functions that may sleep. Hence, they should not be called
+while holding a spinlock or a readlock.
+
+The audio_start/audio_stop function is intended to effectively start/stop audio
+playback after the configuration has taken place. These functions are designed
+to be used in an atomic context. Hence, audio_start should return quickly and be
+called only after all the needed resources for audio playback (audio FIFOs,
+DMA channels, companion chips, etc) have been enabled to begin data transfers.
+audio_stop is designed to only stop the audio transfers. The resources used
+for playback are released using audio_disable.
+
+The enum omap_dss_audio_state may be used to help the implementations of
+the interface to keep track of the audio state. The initial state is _DISABLED;
+then, the state transitions to _CONFIGURED, and then, when it is ready to
+play audio, to _ENABLED. The state _PLAYING is used when the audio is being
+rendered.
+
+
+Panel and controller drivers
+----------------------------
+
+The drivers implement panel or controller specific functionality and are not
+usually visible to users except through omapfb driver.  They register
+themselves to the DSS driver.
+
+omapfb driver
+-------------
+
+The omapfb driver implements arbitrary number of standard linux framebuffers.
+These framebuffers can be routed flexibly to any overlays, thus allowing very
+dynamic display architecture.
+
+The driver exports some omapfb specific ioctls, which are compatible with the
+ioctls in the old driver.
+
+The rest of the non standard features are exported via sysfs. Whether the final
+implementation will use sysfs, or ioctls, is still open.
+
+V4L2 drivers
+------------
+
+V4L2 is being implemented in TI.
+
+From omapdss point of view the V4L2 drivers should be similar to framebuffer
+driver.
+
+Architecture
+--------------------
+
+Some clarification what the different components do:
+
+    - Framebuffer is a memory area inside OMAP's SRAM/SDRAM that contains the
+      pixel data for the image. Framebuffer has width and height and color
+      depth.
+    - Overlay defines where the pixels are read from and where they go on the
+      screen. The overlay may be smaller than framebuffer, thus displaying only
+      part of the framebuffer. The position of the overlay may be changed if
+      the overlay is smaller than the display.
+    - Overlay manager combines the overlays in to one image and feeds them to
+      display.
+    - Display is the actual physical display device.
+
+A framebuffer can be connected to multiple overlays to show the same pixel data
+on all of the overlays. Note that in this case the overlay input sizes must be
+the same, but, in case of video overlays, the output size can be different. Any
+framebuffer can be connected to any overlay.
+
+An overlay can be connected to one overlay manager. Also DISPC overlays can be
+connected only to DISPC overlay managers, and virtual overlays can be only
+connected to virtual overlays.
+
+An overlay manager can be connected to one display. There are certain
+restrictions which kinds of displays an overlay manager can be connected:
+
+    - DISPC TV overlay manager can be only connected to TV display.
+    - Virtual overlay managers can only be connected to DBI or DSI displays.
+    - DISPC LCD overlay manager can be connected to all displays, except TV
+      display.
+
+Sysfs
+-----
+The sysfs interface is mainly used for testing. I don't think sysfs
+interface is the best for this in the final version, but I don't quite know
+what would be the best interfaces for these things.
+
+The sysfs interface is divided to two parts: DSS and FB.
+
+/sys/class/graphics/fb? directory:
+mirror		0=off, 1=on
+rotate		Rotation 0-3 for 0, 90, 180, 270 degrees
+rotate_type	0 = DMA rotation, 1 = VRFB rotation
+overlays	List of overlay numbers to which framebuffer pixels go
+phys_addr	Physical address of the framebuffer
+virt_addr	Virtual address of the framebuffer
+size		Size of the framebuffer
+
+/sys/devices/platform/omapdss/overlay? directory:
+enabled		0=off, 1=on
+input_size	width,height (ie. the framebuffer size)
+manager		Destination overlay manager name
+name
+output_size	width,height
+position	x,y
+screen_width	width
+global_alpha   	global alpha 0-255 0=transparent 255=opaque
+
+/sys/devices/platform/omapdss/manager? directory:
+display				Destination display
+name
+alpha_blending_enabled		0=off, 1=on
+trans_key_enabled		0=off, 1=on
+trans_key_type			gfx-destination, video-source
+trans_key_value			transparency color key (RGB24)
+default_color			default background color (RGB24)
+
+/sys/devices/platform/omapdss/display? directory:
+
+=============== =============================================================
+ctrl_name	Controller name
+mirror		0=off, 1=on
+update_mode	0=off, 1=auto, 2=manual
+enabled		0=off, 1=on
+name
+rotate		Rotation 0-3 for 0, 90, 180, 270 degrees
+timings		Display timings (pixclock,xres/hfp/hbp/hsw,yres/vfp/vbp/vsw)
+		When writing, two special timings are accepted for tv-out:
+		"pal" and "ntsc"
+panel_name
+tear_elim	Tearing elimination 0=off, 1=on
+output_type	Output type (video encoder only): "composite" or "svideo"
+=============== =============================================================
+
+There are also some debugfs files at <debugfs>/omapdss/ which show information
+about clocks and registers.
+
+Examples
+--------
+
+The following definitions have been made for the examples below::
+
+	ovl0=/sys/devices/platform/omapdss/overlay0
+	ovl1=/sys/devices/platform/omapdss/overlay1
+	ovl2=/sys/devices/platform/omapdss/overlay2
+
+	mgr0=/sys/devices/platform/omapdss/manager0
+	mgr1=/sys/devices/platform/omapdss/manager1
+
+	lcd=/sys/devices/platform/omapdss/display0
+	dvi=/sys/devices/platform/omapdss/display1
+	tv=/sys/devices/platform/omapdss/display2
+
+	fb0=/sys/class/graphics/fb0
+	fb1=/sys/class/graphics/fb1
+	fb2=/sys/class/graphics/fb2
+
+Default setup on OMAP3 SDP
+--------------------------
+
+Here's the default setup on OMAP3 SDP board. All planes go to LCD. DVI
+and TV-out are not in use. The columns from left to right are:
+framebuffers, overlays, overlay managers, displays. Framebuffers are
+handled by omapfb, and the rest by the DSS::
+
+	FB0 --- GFX  -\            DVI
+	FB1 --- VID1 --+- LCD ---- LCD
+	FB2 --- VID2 -/   TV ----- TV
+
+Example: Switch from LCD to DVI
+-------------------------------
+
+::
+
+	w=`cat $dvi/timings | cut -d "," -f 2 | cut -d "/" -f 1`
+	h=`cat $dvi/timings | cut -d "," -f 3 | cut -d "/" -f 1`
+
+	echo "0" > $lcd/enabled
+	echo "" > $mgr0/display
+	fbset -fb /dev/fb0 -xres $w -yres $h -vxres $w -vyres $h
+	# at this point you have to switch the dvi/lcd dip-switch from the omap board
+	echo "dvi" > $mgr0/display
+	echo "1" > $dvi/enabled
+
+After this the configuration looks like:::
+
+	FB0 --- GFX  -\         -- DVI
+	FB1 --- VID1 --+- LCD -/   LCD
+	FB2 --- VID2 -/   TV ----- TV
+
+Example: Clone GFX overlay to LCD and TV
+----------------------------------------
+
+::
+
+	w=`cat $tv/timings | cut -d "," -f 2 | cut -d "/" -f 1`
+	h=`cat $tv/timings | cut -d "," -f 3 | cut -d "/" -f 1`
+
+	echo "0" > $ovl0/enabled
+	echo "0" > $ovl1/enabled
+
+	echo "" > $fb1/overlays
+	echo "0,1" > $fb0/overlays
+
+	echo "$w,$h" > $ovl1/output_size
+	echo "tv" > $ovl1/manager
+
+	echo "1" > $ovl0/enabled
+	echo "1" > $ovl1/enabled
+
+	echo "1" > $tv/enabled
+
+After this the configuration looks like (only relevant parts shown)::
+
+	FB0 +-- GFX  ---- LCD ---- LCD
+	\- VID1 ---- TV  ---- TV
+
+Misc notes
+----------
+
+OMAP FB allocates the framebuffer memory using the standard dma allocator. You
+can enable Contiguous Memory Allocator (CONFIG_CMA) to improve the dma
+allocator, and if CMA is enabled, you use "cma=" kernel parameter to increase
+the global memory area for CMA.
+
+Using DSI DPLL to generate pixel clock it is possible produce the pixel clock
+of 86.5MHz (max possible), and with that you get 1280x1024@57 output from DVI.
+
+Rotation and mirroring currently only supports RGB565 and RGB8888 modes. VRFB
+does not support mirroring.
+
+VRFB rotation requires much more memory than non-rotated framebuffer, so you
+probably need to increase your vram setting before using VRFB rotation. Also,
+many applications may not work with VRFB if they do not pay attention to all
+framebuffer parameters.
+
+Kernel boot arguments
+---------------------
+
+omapfb.mode=<display>:<mode>[,...]
+	- Default video mode for specified displays. For example,
+	  "dvi:800x400MR-24@60".  See drivers/video/modedb.c.
+	  There are also two special modes: "pal" and "ntsc" that
+	  can be used to tv out.
+
+omapfb.vram=<fbnum>:<size>[@<physaddr>][,...]
+	- VRAM allocated for a framebuffer. Normally omapfb allocates vram
+	  depending on the display size. With this you can manually allocate
+	  more or define the physical address of each framebuffer. For example,
+	  "1:4M" to allocate 4M for fb1.
+
+omapfb.debug=<y|n>
+	- Enable debug printing. You have to have OMAPFB debug support enabled
+	  in kernel config.
+
+omapfb.test=<y|n>
+	- Draw test pattern to framebuffer whenever framebuffer settings change.
+	  You need to have OMAPFB debug support enabled in kernel config.
+
+omapfb.vrfb=<y|n>
+	- Use VRFB rotation for all framebuffers.
+
+omapfb.rotate=<angle>
+	- Default rotation applied to all framebuffers.
+	  0 - 0 degree rotation
+	  1 - 90 degree rotation
+	  2 - 180 degree rotation
+	  3 - 270 degree rotation
+
+omapfb.mirror=<y|n>
+	- Default mirror for all framebuffers. Only works with DMA rotation.
+
+omapdss.def_disp=<display>
+	- Name of default display, to which all overlays will be connected.
+	  Common examples are "lcd" or "tv".
+
+omapdss.debug=<y|n>
+	- Enable debug printing. You have to have DSS debug support enabled in
+	  kernel config.
+
+TODO
+----
+
+DSS locking
+
+Error checking
+
+- Lots of checks are missing or implemented just as BUG()
+
+System DMA update for DSI
+
+- Can be used for RGB16 and RGB24P modes. Probably not for RGB24U (how
+  to skip the empty byte?)
+
+OMAP1 support
+
+- Not sure if needed
diff --git a/Documentation/arm/omap/index.rst b/Documentation/arm/omap/index.rst
new file mode 100644
index 000000000..8b365b212
--- /dev/null
+++ b/Documentation/arm/omap/index.rst
@@ -0,0 +1,12 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=======
+TI OMAP
+=======
+
+.. toctree::
+   :maxdepth: 1
+
+   omap
+   omap_pm
+   dss
diff --git a/Documentation/arm/omap/omap.rst b/Documentation/arm/omap/omap.rst
new file mode 100644
index 000000000..f440c0f46
--- /dev/null
+++ b/Documentation/arm/omap/omap.rst
@@ -0,0 +1,18 @@
+============
+OMAP history
+============
+
+This file contains documentation for running mainline
+kernel on omaps.
+
+======		======================================================
+KERNEL		NEW DEPENDENCIES
+======		======================================================
+v4.3+		Update is needed for custom .config files to make sure
+		CONFIG_REGULATOR_PBIAS is enabled for MMC1 to work
+		properly.
+
+v4.18+		Update is needed for custom .config files to make sure
+		CONFIG_MMC_SDHCI_OMAP is enabled for all MMC instances
+		to work in DRA7 and K2G based boards.
+======		======================================================
diff --git a/Documentation/arm/omap/omap_pm.rst b/Documentation/arm/omap/omap_pm.rst
new file mode 100644
index 000000000..a335e4c8c
--- /dev/null
+++ b/Documentation/arm/omap/omap_pm.rst
@@ -0,0 +1,165 @@
+=====================
+The OMAP PM interface
+=====================
+
+This document describes the temporary OMAP PM interface.  Driver
+authors use these functions to communicate minimum latency or
+throughput constraints to the kernel power management code.
+Over time, the intention is to merge features from the OMAP PM
+interface into the Linux PM QoS code.
+
+Drivers need to express PM parameters which:
+
+- support the range of power management parameters present in the TI SRF;
+
+- separate the drivers from the underlying PM parameter
+  implementation, whether it is the TI SRF or Linux PM QoS or Linux
+  latency framework or something else;
+
+- specify PM parameters in terms of fundamental units, such as
+  latency and throughput, rather than units which are specific to OMAP
+  or to particular OMAP variants;
+
+- allow drivers which are shared with other architectures (e.g.,
+  DaVinci) to add these constraints in a way which won't affect non-OMAP
+  systems,
+
+- can be implemented immediately with minimal disruption of other
+  architectures.
+
+
+This document proposes the OMAP PM interface, including the following
+five power management functions for driver code:
+
+1. Set the maximum MPU wakeup latency::
+
+   (*pdata->set_max_mpu_wakeup_lat)(struct device *dev, unsigned long t)
+
+2. Set the maximum device wakeup latency::
+
+   (*pdata->set_max_dev_wakeup_lat)(struct device *dev, unsigned long t)
+
+3. Set the maximum system DMA transfer start latency (CORE pwrdm)::
+
+   (*pdata->set_max_sdma_lat)(struct device *dev, long t)
+
+4. Set the minimum bus throughput needed by a device::
+
+   (*pdata->set_min_bus_tput)(struct device *dev, u8 agent_id, unsigned long r)
+
+5. Return the number of times the device has lost context::
+
+   (*pdata->get_dev_context_loss_count)(struct device *dev)
+
+
+Further documentation for all OMAP PM interface functions can be
+found in arch/arm/plat-omap/include/mach/omap-pm.h.
+
+
+The OMAP PM layer is intended to be temporary
+---------------------------------------------
+
+The intention is that eventually the Linux PM QoS layer should support
+the range of power management features present in OMAP3.  As this
+happens, existing drivers using the OMAP PM interface can be modified
+to use the Linux PM QoS code; and the OMAP PM interface can disappear.
+
+
+Driver usage of the OMAP PM functions
+-------------------------------------
+
+As the 'pdata' in the above examples indicates, these functions are
+exposed to drivers through function pointers in driver .platform_data
+structures.  The function pointers are initialized by the `board-*.c`
+files to point to the corresponding OMAP PM functions:
+
+- set_max_dev_wakeup_lat will point to
+  omap_pm_set_max_dev_wakeup_lat(), etc.  Other architectures which do
+  not support these functions should leave these function pointers set
+  to NULL.  Drivers should use the following idiom::
+
+        if (pdata->set_max_dev_wakeup_lat)
+            (*pdata->set_max_dev_wakeup_lat)(dev, t);
+
+The most common usage of these functions will probably be to specify
+the maximum time from when an interrupt occurs, to when the device
+becomes accessible.  To accomplish this, driver writers should use the
+set_max_mpu_wakeup_lat() function to constrain the MPU wakeup
+latency, and the set_max_dev_wakeup_lat() function to constrain the
+device wakeup latency (from clk_enable() to accessibility).  For
+example::
+
+        /* Limit MPU wakeup latency */
+        if (pdata->set_max_mpu_wakeup_lat)
+            (*pdata->set_max_mpu_wakeup_lat)(dev, tc);
+
+        /* Limit device powerdomain wakeup latency */
+        if (pdata->set_max_dev_wakeup_lat)
+            (*pdata->set_max_dev_wakeup_lat)(dev, td);
+
+        /* total wakeup latency in this example: (tc + td) */
+
+The PM parameters can be overwritten by calling the function again
+with the new value.  The settings can be removed by calling the
+function with a t argument of -1 (except in the case of
+set_max_bus_tput(), which should be called with an r argument of 0).
+
+The fifth function above, omap_pm_get_dev_context_loss_count(),
+is intended as an optimization to allow drivers to determine whether the
+device has lost its internal context.  If context has been lost, the
+driver must restore its internal context before proceeding.
+
+
+Other specialized interface functions
+-------------------------------------
+
+The five functions listed above are intended to be usable by any
+device driver.  DSPBridge and CPUFreq have a few special requirements.
+DSPBridge expresses target DSP performance levels in terms of OPP IDs.
+CPUFreq expresses target MPU performance levels in terms of MPU
+frequency.  The OMAP PM interface contains functions for these
+specialized cases to convert that input information (OPPs/MPU
+frequency) into the form that the underlying power management
+implementation needs:
+
+6. `(*pdata->dsp_get_opp_table)(void)`
+
+7. `(*pdata->dsp_set_min_opp)(u8 opp_id)`
+
+8. `(*pdata->dsp_get_opp)(void)`
+
+9. `(*pdata->cpu_get_freq_table)(void)`
+
+10. `(*pdata->cpu_set_freq)(unsigned long f)`
+
+11. `(*pdata->cpu_get_freq)(void)`
+
+Customizing OPP for platform
+============================
+Defining CONFIG_PM should enable OPP layer for the silicon
+and the registration of OPP table should take place automatically.
+However, in special cases, the default OPP table may need to be
+tweaked, for e.g.:
+
+ * enable default OPPs which are disabled by default, but which
+   could be enabled on a platform
+ * Disable an unsupported OPP on the platform
+ * Define and add a custom opp table entry
+   in these cases, the board file needs to do additional steps as follows:
+
+arch/arm/mach-omapx/board-xyz.c::
+
+	#include "pm.h"
+	....
+	static void __init omap_xyz_init_irq(void)
+	{
+		....
+		/* Initialize the default table */
+		omapx_opp_init();
+		/* Do customization to the defaults */
+		....
+	}
+
+NOTE:
+  omapx_opp_init will be omap3_opp_init or as required
+  based on the omap family.
diff --git a/Documentation/arm/porting.rst b/Documentation/arm/porting.rst
new file mode 100644
index 000000000..bd21958bd
--- /dev/null
+++ b/Documentation/arm/porting.rst
@@ -0,0 +1,137 @@
+=======
+Porting
+=======
+
+Taken from list archive at http://lists.arm.linux.org.uk/pipermail/linux-arm-kernel/2001-July/004064.html
+
+Initial definitions
+-------------------
+
+The following symbol definitions rely on you knowing the translation that
+__virt_to_phys() does for your machine.  This macro converts the passed
+virtual address to a physical address.  Normally, it is simply:
+
+		phys = virt - PAGE_OFFSET + PHYS_OFFSET
+
+
+Decompressor Symbols
+--------------------
+
+ZTEXTADDR
+	Start address of decompressor.  There's no point in talking about
+	virtual or physical addresses here, since the MMU will be off at
+	the time when you call the decompressor code.  You normally call
+	the kernel at this address to start it booting.  This doesn't have
+	to be located in RAM, it can be in flash or other read-only or
+	read-write addressable medium.
+
+ZBSSADDR
+	Start address of zero-initialised work area for the decompressor.
+	This must be pointing at RAM.  The decompressor will zero initialise
+	this for you.  Again, the MMU will be off.
+
+ZRELADDR
+	This is the address where the decompressed kernel will be written,
+	and eventually executed.  The following constraint must be valid:
+
+		__virt_to_phys(TEXTADDR) == ZRELADDR
+
+	The initial part of the kernel is carefully coded to be position
+	independent.
+
+INITRD_PHYS
+	Physical address to place the initial RAM disk.  Only relevant if
+	you are using the bootpImage stuff (which only works on the old
+	struct param_struct).
+
+INITRD_VIRT
+	Virtual address of the initial RAM disk.  The following  constraint
+	must be valid:
+
+		__virt_to_phys(INITRD_VIRT) == INITRD_PHYS
+
+PARAMS_PHYS
+	Physical address of the struct param_struct or tag list, giving the
+	kernel various parameters about its execution environment.
+
+
+Kernel Symbols
+--------------
+
+PHYS_OFFSET
+	Physical start address of the first bank of RAM.
+
+PAGE_OFFSET
+	Virtual start address of the first bank of RAM.  During the kernel
+	boot phase, virtual address PAGE_OFFSET will be mapped to physical
+	address PHYS_OFFSET, along with any other mappings you supply.
+	This should be the same value as TASK_SIZE.
+
+TASK_SIZE
+	The maximum size of a user process in bytes.  Since user space
+	always starts at zero, this is the maximum address that a user
+	process can access+1.  The user space stack grows down from this
+	address.
+
+	Any virtual address below TASK_SIZE is deemed to be user process
+	area, and therefore managed dynamically on a process by process
+	basis by the kernel.  I'll call this the user segment.
+
+	Anything above TASK_SIZE is common to all processes.  I'll call
+	this the kernel segment.
+
+	(In other words, you can't put IO mappings below TASK_SIZE, and
+	hence PAGE_OFFSET).
+
+TEXTADDR
+	Virtual start address of kernel, normally PAGE_OFFSET + 0x8000.
+	This is where the kernel image ends up.  With the latest kernels,
+	it must be located at 32768 bytes into a 128MB region.  Previous
+	kernels placed a restriction of 256MB here.
+
+DATAADDR
+	Virtual address for the kernel data segment.  Must not be defined
+	when using the decompressor.
+
+VMALLOC_START / VMALLOC_END
+	Virtual addresses bounding the vmalloc() area.  There must not be
+	any static mappings in this area; vmalloc will overwrite them.
+	The addresses must also be in the kernel segment (see above).
+	Normally, the vmalloc() area starts VMALLOC_OFFSET bytes above the
+	last virtual RAM address (found using variable high_memory).
+
+VMALLOC_OFFSET
+	Offset normally incorporated into VMALLOC_START to provide a hole
+	between virtual RAM and the vmalloc area.  We do this to allow
+	out of bounds memory accesses (eg, something writing off the end
+	of the mapped memory map) to be caught.  Normally set to 8MB.
+
+Architecture Specific Macros
+----------------------------
+
+BOOT_MEM(pram,pio,vio)
+	`pram` specifies the physical start address of RAM.  Must always
+	be present, and should be the same as PHYS_OFFSET.
+
+	`pio` is the physical address of an 8MB region containing IO for
+	use with the debugging macros in arch/arm/kernel/debug-armv.S.
+
+	`vio` is the virtual address of the 8MB debugging region.
+
+	It is expected that the debugging region will be re-initialised
+	by the architecture specific code later in the code (via the
+	MAPIO function).
+
+BOOT_PARAMS
+	Same as, and see PARAMS_PHYS.
+
+FIXUP(func)
+	Machine specific fixups, run before memory subsystems have been
+	initialised.
+
+MAPIO(func)
+	Machine specific function to map IO areas (including the debug
+	region above).
+
+INITIRQ(func)
+	Machine specific function to initialise interrupts.
diff --git a/Documentation/arm/pxa/mfp.rst b/Documentation/arm/pxa/mfp.rst
new file mode 100644
index 000000000..ac34e5d7e
--- /dev/null
+++ b/Documentation/arm/pxa/mfp.rst
@@ -0,0 +1,288 @@
+==============================================
+MFP Configuration for PXA2xx/PXA3xx Processors
+==============================================
+
+			Eric Miao <eric.miao@marvell.com>
+
+MFP stands for Multi-Function Pin, which is the pin-mux logic on PXA3xx and
+later PXA series processors.  This document describes the existing MFP API,
+and how board/platform driver authors could make use of it.
+
+Basic Concept
+=============
+
+Unlike the GPIO alternate function settings on PXA25x and PXA27x, a new MFP
+mechanism is introduced from PXA3xx to completely move the pin-mux functions
+out of the GPIO controller. In addition to pin-mux configurations, the MFP
+also controls the low power state, driving strength, pull-up/down and event
+detection of each pin.  Below is a diagram of internal connections between
+the MFP logic and the remaining SoC peripherals::
+
+ +--------+
+ |        |--(GPIO19)--+
+ |  GPIO  |            |
+ |        |--(GPIO...) |
+ +--------+            |
+                       |       +---------+
+ +--------+            +------>|         |
+ |  PWM2  |--(PWM_OUT)-------->|   MFP   |
+ +--------+            +------>|         |-------> to external PAD
+                       | +---->|         |
+ +--------+            | | +-->|         |
+ |  SSP2  |---(TXD)----+ | |   +---------+
+ +--------+              | |
+                         | |
+ +--------+              | |
+ | Keypad |--(MKOUT4)----+ |
+ +--------+                |
+                           |
+ +--------+                |
+ |  UART2 |---(TXD)--------+
+ +--------+
+
+NOTE: the external pad is named as MFP_PIN_GPIO19, it doesn't necessarily
+mean it's dedicated for GPIO19, only as a hint that internally this pin
+can be routed from GPIO19 of the GPIO controller.
+
+To better understand the change from PXA25x/PXA27x GPIO alternate function
+to this new MFP mechanism, here are several key points:
+
+  1. GPIO controller on PXA3xx is now a dedicated controller, same as other
+     internal controllers like PWM, SSP and UART, with 128 internal signals
+     which can be routed to external through one or more MFPs (e.g. GPIO<0>
+     can be routed through either MFP_PIN_GPIO0 as well as MFP_PIN_GPIO0_2,
+     see arch/arm/mach-pxa/mfp-pxa300.h)
+
+  2. Alternate function configuration is removed from this GPIO controller,
+     the remaining functions are pure GPIO-specific, i.e.
+
+       - GPIO signal level control
+       - GPIO direction control
+       - GPIO level change detection
+
+  3. Low power state for each pin is now controlled by MFP, this means the
+     PGSRx registers on PXA2xx are now useless on PXA3xx
+
+  4. Wakeup detection is now controlled by MFP, PWER does not control the
+     wakeup from GPIO(s) any more, depending on the sleeping state, ADxER
+     (as defined in pxa3xx-regs.h) controls the wakeup from MFP
+
+NOTE: with such a clear separation of MFP and GPIO, by GPIO<xx> we normally
+mean it is a GPIO signal, and by MFP<xxx> or pin xxx, we mean a physical
+pad (or ball).
+
+MFP API Usage
+=============
+
+For board code writers, here are some guidelines:
+
+1. include ONE of the following header files in your <board>.c:
+
+   - #include "mfp-pxa25x.h"
+   - #include "mfp-pxa27x.h"
+   - #include "mfp-pxa300.h"
+   - #include "mfp-pxa320.h"
+   - #include "mfp-pxa930.h"
+
+   NOTE: only one file in your <board>.c, depending on the processors used,
+   because pin configuration definitions may conflict in these file (i.e.
+   same name, different meaning and settings on different processors). E.g.
+   for zylonite platform, which support both PXA300/PXA310 and PXA320, two
+   separate files are introduced: zylonite_pxa300.c and zylonite_pxa320.c
+   (in addition to handle MFP configuration differences, they also handle
+   the other differences between the two combinations).
+
+   NOTE: PXA300 and PXA310 are almost identical in pin configurations (with
+   PXA310 supporting some additional ones), thus the difference is actually
+   covered in a single mfp-pxa300.h.
+
+2. prepare an array for the initial pin configurations, e.g.::
+
+     static unsigned long mainstone_pin_config[] __initdata = {
+	/* Chip Select */
+	GPIO15_nCS_1,
+
+	/* LCD - 16bpp Active TFT */
+	GPIOxx_TFT_LCD_16BPP,
+	GPIO16_PWM0_OUT,	/* Backlight */
+
+	/* MMC */
+	GPIO32_MMC_CLK,
+	GPIO112_MMC_CMD,
+	GPIO92_MMC_DAT_0,
+	GPIO109_MMC_DAT_1,
+	GPIO110_MMC_DAT_2,
+	GPIO111_MMC_DAT_3,
+
+	...
+
+	/* GPIO */
+	GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
+     };
+
+   a) once the pin configurations are passed to pxa{2xx,3xx}_mfp_config(),
+   and written to the actual registers, they are useless and may discard,
+   adding '__initdata' will help save some additional bytes here.
+
+   b) when there is only one possible pin configurations for a component,
+   some simplified definitions can be used, e.g. GPIOxx_TFT_LCD_16BPP on
+   PXA25x and PXA27x processors
+
+   c) if by board design, a pin can be configured to wake up the system
+   from low power state, it can be 'OR'ed with any of:
+
+      WAKEUP_ON_EDGE_BOTH
+      WAKEUP_ON_EDGE_RISE
+      WAKEUP_ON_EDGE_FALL
+      WAKEUP_ON_LEVEL_HIGH - specifically for enabling of keypad GPIOs,
+
+   to indicate that this pin has the capability of wake-up the system,
+   and on which edge(s). This, however, doesn't necessarily mean the
+   pin _will_ wakeup the system, it will only when set_irq_wake() is
+   invoked with the corresponding GPIO IRQ (GPIO_IRQ(xx) or gpio_to_irq())
+   and eventually calls gpio_set_wake() for the actual register setting.
+
+   d) although PXA3xx MFP supports edge detection on each pin, the
+   internal logic will only wakeup the system when those specific bits
+   in ADxER registers are set, which can be well mapped to the
+   corresponding peripheral, thus set_irq_wake() can be called with
+   the peripheral IRQ to enable the wakeup.
+
+
+MFP on PXA3xx
+=============
+
+Every external I/O pad on PXA3xx (excluding those for special purpose) has
+one MFP logic associated, and is controlled by one MFP register (MFPR).
+
+The MFPR has the following bit definitions (for PXA300/PXA310/PXA320)::
+
+ 31                        16 15 14 13 12 11 10  9  8  7  6  5  4  3  2  1  0
+  +-------------------------+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
+  |         RESERVED        |PS|PU|PD|  DRIVE |SS|SD|SO|EC|EF|ER|--| AF_SEL |
+  +-------------------------+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
+
+  Bit 3:   RESERVED
+  Bit 4:   EDGE_RISE_EN - enable detection of rising edge on this pin
+  Bit 5:   EDGE_FALL_EN - enable detection of falling edge on this pin
+  Bit 6:   EDGE_CLEAR   - disable edge detection on this pin
+  Bit 7:   SLEEP_OE_N   - enable outputs during low power modes
+  Bit 8:   SLEEP_DATA   - output data on the pin during low power modes
+  Bit 9:   SLEEP_SEL    - selection control for low power modes signals
+  Bit 13:  PULLDOWN_EN  - enable the internal pull-down resistor on this pin
+  Bit 14:  PULLUP_EN    - enable the internal pull-up resistor on this pin
+  Bit 15:  PULL_SEL     - pull state controlled by selected alternate function
+                          (0) or by PULL{UP,DOWN}_EN bits (1)
+
+  Bit 0 - 2: AF_SEL - alternate function selection, 8 possibilities, from 0-7
+  Bit 10-12: DRIVE  - drive strength and slew rate
+			0b000 - fast 1mA
+			0b001 - fast 2mA
+			0b002 - fast 3mA
+			0b003 - fast 4mA
+			0b004 - slow 6mA
+			0b005 - fast 6mA
+			0b006 - slow 10mA
+			0b007 - fast 10mA
+
+MFP Design for PXA2xx/PXA3xx
+============================
+
+Due to the difference of pin-mux handling between PXA2xx and PXA3xx, a unified
+MFP API is introduced to cover both series of processors.
+
+The basic idea of this design is to introduce definitions for all possible pin
+configurations, these definitions are processor and platform independent, and
+the actual API invoked to convert these definitions into register settings and
+make them effective there-after.
+
+Files Involved
+--------------
+
+  - arch/arm/mach-pxa/include/mach/mfp.h
+
+  for
+    1. Unified pin definitions - enum constants for all configurable pins
+    2. processor-neutral bit definitions for a possible MFP configuration
+
+  - arch/arm/mach-pxa/mfp-pxa3xx.h
+
+  for PXA3xx specific MFPR register bit definitions and PXA3xx common pin
+  configurations
+
+  - arch/arm/mach-pxa/mfp-pxa2xx.h
+
+  for PXA2xx specific definitions and PXA25x/PXA27x common pin configurations
+
+  - arch/arm/mach-pxa/mfp-pxa25x.h
+    arch/arm/mach-pxa/mfp-pxa27x.h
+    arch/arm/mach-pxa/mfp-pxa300.h
+    arch/arm/mach-pxa/mfp-pxa320.h
+    arch/arm/mach-pxa/mfp-pxa930.h
+
+  for processor specific definitions
+
+  - arch/arm/mach-pxa/mfp-pxa3xx.c
+  - arch/arm/mach-pxa/mfp-pxa2xx.c
+
+  for implementation of the pin configuration to take effect for the actual
+  processor.
+
+Pin Configuration
+-----------------
+
+  The following comments are copied from mfp.h (see the actual source code
+  for most updated info)::
+
+    /*
+     * a possible MFP configuration is represented by a 32-bit integer
+     *
+     * bit  0.. 9 - MFP Pin Number (1024 Pins Maximum)
+     * bit 10..12 - Alternate Function Selection
+     * bit 13..15 - Drive Strength
+     * bit 16..18 - Low Power Mode State
+     * bit 19..20 - Low Power Mode Edge Detection
+     * bit 21..22 - Run Mode Pull State
+     *
+     * to facilitate the definition, the following macros are provided
+     *
+     * MFP_CFG_DEFAULT - default MFP configuration value, with
+     * 		  alternate function = 0,
+     * 		  drive strength = fast 3mA (MFP_DS03X)
+     * 		  low power mode = default
+     * 		  edge detection = none
+     *
+     * MFP_CFG	- default MFPR value with alternate function
+     * MFP_CFG_DRV	- default MFPR value with alternate function and
+     * 		  pin drive strength
+     * MFP_CFG_LPM	- default MFPR value with alternate function and
+     * 		  low power mode
+     * MFP_CFG_X	- default MFPR value with alternate function,
+     * 		  pin drive strength and low power mode
+     */
+
+   Examples of pin configurations are::
+
+     #define GPIO94_SSP3_RXD		MFP_CFG_X(GPIO94, AF1, DS08X, FLOAT)
+
+   which reads GPIO94 can be configured as SSP3_RXD, with alternate function
+   selection of 1, driving strength of 0b101, and a float state in low power
+   modes.
+
+   NOTE: this is the default setting of this pin being configured as SSP3_RXD
+   which can be modified a bit in board code, though it is not recommended to
+   do so, simply because this default setting is usually carefully encoded,
+   and is supposed to work in most cases.
+
+Register Settings
+-----------------
+
+   Register settings on PXA3xx for a pin configuration is actually very
+   straight-forward, most bits can be converted directly into MFPR value
+   in a easier way. Two sets of MFPR values are calculated: the run-time
+   ones and the low power mode ones, to allow different settings.
+
+   The conversion from a generic pin configuration to the actual register
+   settings on PXA2xx is a bit complicated: many registers are involved,
+   including GAFRx, GPDRx, PGSRx, PWER, PKWR, PFER and PRER. Please see
+   mfp-pxa2xx.c for how the conversion is made.
diff --git a/Documentation/arm/sa1100/assabet.rst b/Documentation/arm/sa1100/assabet.rst
new file mode 100644
index 000000000..a761e128f
--- /dev/null
+++ b/Documentation/arm/sa1100/assabet.rst
@@ -0,0 +1,301 @@
+============================================
+The Intel Assabet (SA-1110 evaluation) board
+============================================
+
+Please see:
+http://developer.intel.com
+
+Also some notes from John G Dorsey <jd5q@andrew.cmu.edu>:
+http://www.cs.cmu.edu/~wearable/software/assabet.html
+
+
+Building the kernel
+-------------------
+
+To build the kernel with current defaults::
+
+	make assabet_defconfig
+	make oldconfig
+	make zImage
+
+The resulting kernel image should be available in linux/arch/arm/boot/zImage.
+
+
+Installing a bootloader
+-----------------------
+
+A couple of bootloaders able to boot Linux on Assabet are available:
+
+BLOB (http://www.lartmaker.nl/lartware/blob/)
+
+   BLOB is a bootloader used within the LART project.  Some contributed
+   patches were merged into BLOB to add support for Assabet.
+
+Compaq's Bootldr + John Dorsey's patch for Assabet support
+(http://www.handhelds.org/Compaq/bootldr.html)
+(http://www.wearablegroup.org/software/bootldr/)
+
+   Bootldr is the bootloader developed by Compaq for the iPAQ Pocket PC.
+   John Dorsey has produced add-on patches to add support for Assabet and
+   the JFFS filesystem.
+
+RedBoot (http://sources.redhat.com/redboot/)
+
+   RedBoot is a bootloader developed by Red Hat based on the eCos RTOS
+   hardware abstraction layer.  It supports Assabet amongst many other
+   hardware platforms.
+
+RedBoot is currently the recommended choice since it's the only one to have
+networking support, and is the most actively maintained.
+
+Brief examples on how to boot Linux with RedBoot are shown below.  But first
+you need to have RedBoot installed in your flash memory.  A known to work
+precompiled RedBoot binary is available from the following location:
+
+- ftp://ftp.netwinder.org/users/n/nico/
+- ftp://ftp.arm.linux.org.uk/pub/linux/arm/people/nico/
+- ftp://ftp.handhelds.org/pub/linux/arm/sa-1100-patches/
+
+Look for redboot-assabet*.tgz.  Some installation infos are provided in
+redboot-assabet*.txt.
+
+
+Initial RedBoot configuration
+-----------------------------
+
+The commands used here are explained in The RedBoot User's Guide available
+on-line at http://sources.redhat.com/ecos/docs.html.
+Please refer to it for explanations.
+
+If you have a CF network card (my Assabet kit contained a CF+ LP-E from
+Socket Communications Inc.), you should strongly consider using it for TFTP
+file transfers.  You must insert it before RedBoot runs since it can't detect
+it dynamically.
+
+To initialize the flash directory::
+
+	fis init -f
+
+To initialize the non-volatile settings, like whether you want to use BOOTP or
+a static IP address, etc, use this command::
+
+	fconfig -i
+
+
+Writing a kernel image into flash
+---------------------------------
+
+First, the kernel image must be loaded into RAM.  If you have the zImage file
+available on a TFTP server::
+
+	load zImage -r -b 0x100000
+
+If you rather want to use Y-Modem upload over the serial port::
+
+	load -m ymodem -r -b 0x100000
+
+To write it to flash::
+
+	fis create "Linux kernel" -b 0x100000 -l 0xc0000
+
+
+Booting the kernel
+------------------
+
+The kernel still requires a filesystem to boot.  A ramdisk image can be loaded
+as follows::
+
+	load ramdisk_image.gz -r -b 0x800000
+
+Again, Y-Modem upload can be used instead of TFTP by replacing the file name
+by '-y ymodem'.
+
+Now the kernel can be retrieved from flash like this::
+
+	fis load "Linux kernel"
+
+or loaded as described previously.  To boot the kernel::
+
+	exec -b 0x100000 -l 0xc0000
+
+The ramdisk image could be stored into flash as well, but there are better
+solutions for on-flash filesystems as mentioned below.
+
+
+Using JFFS2
+-----------
+
+Using JFFS2 (the Second Journalling Flash File System) is probably the most
+convenient way to store a writable filesystem into flash.  JFFS2 is used in
+conjunction with the MTD layer which is responsible for low-level flash
+management.  More information on the Linux MTD can be found on-line at:
+http://www.linux-mtd.infradead.org/.  A JFFS howto with some infos about
+creating JFFS/JFFS2 images is available from the same site.
+
+For instance, a sample JFFS2 image can be retrieved from the same FTP sites
+mentioned below for the precompiled RedBoot image.
+
+To load this file::
+
+	load sample_img.jffs2 -r -b 0x100000
+
+The result should look like::
+
+	RedBoot> load sample_img.jffs2 -r -b 0x100000
+	Raw file loaded 0x00100000-0x00377424
+
+Now we must know the size of the unallocated flash::
+
+	fis free
+
+Result::
+
+	RedBoot> fis free
+	  0x500E0000 .. 0x503C0000
+
+The values above may be different depending on the size of the filesystem and
+the type of flash.  See their usage below as an example and take care of
+substituting yours appropriately.
+
+We must determine some values::
+
+	size of unallocated flash:	0x503c0000 - 0x500e0000 = 0x2e0000
+	size of the filesystem image:	0x00377424 - 0x00100000 = 0x277424
+
+We want to fit the filesystem image of course, but we also want to give it all
+the remaining flash space as well.  To write it::
+
+	fis unlock -f 0x500E0000 -l 0x2e0000
+	fis erase -f 0x500E0000 -l 0x2e0000
+	fis write -b 0x100000 -l 0x277424 -f 0x500E0000
+	fis create "JFFS2" -n -f 0x500E0000 -l 0x2e0000
+
+Now the filesystem is associated to a MTD "partition" once Linux has discovered
+what they are in the boot process.  From Redboot, the 'fis list' command
+displays them::
+
+	RedBoot> fis list
+	Name              FLASH addr  Mem addr    Length      Entry point
+	RedBoot           0x50000000  0x50000000  0x00020000  0x00000000
+	RedBoot config    0x503C0000  0x503C0000  0x00020000  0x00000000
+	FIS directory     0x503E0000  0x503E0000  0x00020000  0x00000000
+	Linux kernel      0x50020000  0x00100000  0x000C0000  0x00000000
+	JFFS2             0x500E0000  0x500E0000  0x002E0000  0x00000000
+
+However Linux should display something like::
+
+	SA1100 flash: probing 32-bit flash bus
+	SA1100 flash: Found 2 x16 devices at 0x0 in 32-bit mode
+	Using RedBoot partition definition
+	Creating 5 MTD partitions on "SA1100 flash":
+	0x00000000-0x00020000 : "RedBoot"
+	0x00020000-0x000e0000 : "Linux kernel"
+	0x000e0000-0x003c0000 : "JFFS2"
+	0x003c0000-0x003e0000 : "RedBoot config"
+	0x003e0000-0x00400000 : "FIS directory"
+
+What's important here is the position of the partition we are interested in,
+which is the third one.  Within Linux, this correspond to /dev/mtdblock2.
+Therefore to boot Linux with the kernel and its root filesystem in flash, we
+need this RedBoot command::
+
+	fis load "Linux kernel"
+	exec -b 0x100000 -l 0xc0000 -c "root=/dev/mtdblock2"
+
+Of course other filesystems than JFFS might be used, like cramfs for example.
+You might want to boot with a root filesystem over NFS, etc.  It is also
+possible, and sometimes more convenient, to flash a filesystem directly from
+within Linux while booted from a ramdisk or NFS.  The Linux MTD repository has
+many tools to deal with flash memory as well, to erase it for example.  JFFS2
+can then be mounted directly on a freshly erased partition and files can be
+copied over directly.  Etc...
+
+
+RedBoot scripting
+-----------------
+
+All the commands above aren't so useful if they have to be typed in every
+time the Assabet is rebooted.  Therefore it's possible to automate the boot
+process using RedBoot's scripting capability.
+
+For example, I use this to boot Linux with both the kernel and the ramdisk
+images retrieved from a TFTP server on the network::
+
+	RedBoot> fconfig
+	Run script at boot: false true
+	Boot script:
+	Enter script, terminate with empty line
+	>> load zImage -r -b 0x100000
+	>> load ramdisk_ks.gz -r -b 0x800000
+	>> exec -b 0x100000 -l 0xc0000
+	>>
+	Boot script timeout (1000ms resolution): 3
+	Use BOOTP for network configuration: true
+	GDB connection port: 9000
+	Network debug at boot time: false
+	Update RedBoot non-volatile configuration - are you sure (y/n)? y
+
+Then, rebooting the Assabet is just a matter of waiting for the login prompt.
+
+
+
+Nicolas Pitre
+nico@fluxnic.net
+
+June 12, 2001
+
+
+Status of peripherals in -rmk tree (updated 14/10/2001)
+-------------------------------------------------------
+
+Assabet:
+ Serial ports:
+  Radio:		TX, RX, CTS, DSR, DCD, RI
+   - PM:		Not tested.
+   - COM:		TX, RX, CTS, DSR, DCD, RTS, DTR, PM
+   - PM:		Not tested.
+   - I2C:		Implemented, not fully tested.
+   - L3:		Fully tested, pass.
+   - PM:		Not tested.
+
+ Video:
+  - LCD:		Fully tested.  PM
+
+   (LCD doesn't like being blanked with neponset connected)
+
+  - Video out:		Not fully
+
+ Audio:
+  UDA1341:
+  -  Playback:		Fully tested, pass.
+  -  Record:		Implemented, not tested.
+  -  PM:			Not tested.
+
+  UCB1200:
+  -  Audio play:	Implemented, not heavily tested.
+  -  Audio rec:		Implemented, not heavily tested.
+  -  Telco audio play:	Implemented, not heavily tested.
+  -  Telco audio rec:	Implemented, not heavily tested.
+  -  POTS control:	No
+  -  Touchscreen:	Yes
+  -  PM:		Not tested.
+
+ Other:
+  - PCMCIA:
+  - LPE:		Fully tested, pass.
+  - USB:		No
+  - IRDA:
+  - SIR:		Fully tested, pass.
+  - FIR:		Fully tested, pass.
+  - PM:			Not tested.
+
+Neponset:
+ Serial ports:
+  - COM1,2:		TX, RX, CTS, DSR, DCD, RTS, DTR
+  - PM:			Not tested.
+  - USB:		Implemented, not heavily tested.
+  - PCMCIA:		Implemented, not heavily tested.
+  - CF:			Implemented, not heavily tested.
+  - PM:			Not tested.
+
+More stuff can be found in the -np (Nicolas Pitre's) tree.
diff --git a/Documentation/arm/sa1100/cerf.rst b/Documentation/arm/sa1100/cerf.rst
new file mode 100644
index 000000000..7fa71b609
--- /dev/null
+++ b/Documentation/arm/sa1100/cerf.rst
@@ -0,0 +1,35 @@
+==============
+CerfBoard/Cube
+==============
+
+*** The StrongARM version of the CerfBoard/Cube has been discontinued ***
+
+The Intrinsyc CerfBoard is a StrongARM 1110-based computer on a board
+that measures approximately 2" square. It includes an Ethernet
+controller, an RS232-compatible serial port, a USB function port, and
+one CompactFlash+ slot on the back. Pictures can be found at the
+Intrinsyc website, http://www.intrinsyc.com.
+
+This document describes the support in the Linux kernel for the
+Intrinsyc CerfBoard.
+
+Supported in this version
+=========================
+
+   - CompactFlash+ slot (select PCMCIA in General Setup and any options
+     that may be required)
+   - Onboard Crystal CS8900 Ethernet controller (Cerf CS8900A support in
+     Network Devices)
+   - Serial ports with a serial console (hardcoded to 38400 8N1)
+
+In order to get this kernel onto your Cerf, you need a server that runs
+both BOOTP and TFTP. Detailed instructions should have come with your
+evaluation kit on how to use the bootloader. This series of commands
+will suffice::
+
+   make ARCH=arm CROSS_COMPILE=arm-linux- cerfcube_defconfig
+   make ARCH=arm CROSS_COMPILE=arm-linux- zImage
+   make ARCH=arm CROSS_COMPILE=arm-linux- modules
+   cp arch/arm/boot/zImage <TFTP directory>
+
+support@intrinsyc.com
diff --git a/Documentation/arm/sa1100/index.rst b/Documentation/arm/sa1100/index.rst
new file mode 100644
index 000000000..c9aed4328
--- /dev/null
+++ b/Documentation/arm/sa1100/index.rst
@@ -0,0 +1,13 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+====================
+Intel StrongARM 1100
+====================
+
+.. toctree::
+    :maxdepth: 1
+
+    assabet
+    cerf
+    lart
+    serial_uart
diff --git a/Documentation/arm/sa1100/lart.rst b/Documentation/arm/sa1100/lart.rst
new file mode 100644
index 000000000..94c0568d1
--- /dev/null
+++ b/Documentation/arm/sa1100/lart.rst
@@ -0,0 +1,15 @@
+====================================
+Linux Advanced Radio Terminal (LART)
+====================================
+
+The LART is a small (7.5 x 10cm) SA-1100 board, designed for embedded
+applications. It has 32 MB DRAM, 4MB Flash ROM, double RS232 and all
+other StrongARM-gadgets. Almost all SA signals are directly accessible
+through a number of connectors. The powersupply accepts voltages
+between 3.5V and 16V and is overdimensioned to support a range of
+daughterboards. A quad Ethernet / IDE / PS2 / sound daughterboard
+is under development, with plenty of others in different stages of
+planning.
+
+The hardware designs for this board have been released under an open license;
+see the LART page at http://www.lartmaker.nl/ for more information.
diff --git a/Documentation/arm/sa1100/serial_uart.rst b/Documentation/arm/sa1100/serial_uart.rst
new file mode 100644
index 000000000..ea983642b
--- /dev/null
+++ b/Documentation/arm/sa1100/serial_uart.rst
@@ -0,0 +1,51 @@
+==================
+SA1100 serial port
+==================
+
+The SA1100 serial port had its major/minor numbers officially assigned::
+
+  > Date: Sun, 24 Sep 2000 21:40:27 -0700
+  > From: H. Peter Anvin <hpa@transmeta.com>
+  > To: Nicolas Pitre <nico@CAM.ORG>
+  > Cc: Device List Maintainer <device@lanana.org>
+  > Subject: Re: device
+  >
+  > Okay.  Note that device numbers 204 and 205 are used for "low density
+  > serial devices", so you will have a range of minors on those majors (the
+  > tty device layer handles this just fine, so you don't have to worry about
+  > doing anything special.)
+  >
+  > So your assignments are:
+  >
+  > 204 char        Low-density serial ports
+  >                   5 = /dev/ttySA0               SA1100 builtin serial port 0
+  >                   6 = /dev/ttySA1               SA1100 builtin serial port 1
+  >                   7 = /dev/ttySA2               SA1100 builtin serial port 2
+  >
+  > 205 char        Low-density serial ports (alternate device)
+  >                   5 = /dev/cusa0                Callout device for ttySA0
+  >                   6 = /dev/cusa1                Callout device for ttySA1
+  >                   7 = /dev/cusa2                Callout device for ttySA2
+  >
+
+You must create those inodes in /dev on the root filesystem used
+by your SA1100-based device::
+
+	mknod ttySA0 c 204 5
+	mknod ttySA1 c 204 6
+	mknod ttySA2 c 204 7
+	mknod cusa0 c 205 5
+	mknod cusa1 c 205 6
+	mknod cusa2 c 205 7
+
+In addition to the creation of the appropriate device nodes above, you
+must ensure your user space applications make use of the correct device
+name. The classic example is the content of the /etc/inittab file where
+you might have a getty process started on ttyS0.
+
+In this case:
+
+- replace occurrences of ttyS0 with ttySA0, ttyS1 with ttySA1, etc.
+
+- don't forget to add 'ttySA0', 'console', or the appropriate tty name
+  in /etc/securetty for root to be allowed to login as well.
diff --git a/Documentation/arm/samsung-s3c24xx/cpufreq.rst b/Documentation/arm/samsung-s3c24xx/cpufreq.rst
new file mode 100644
index 000000000..cd22697cf
--- /dev/null
+++ b/Documentation/arm/samsung-s3c24xx/cpufreq.rst
@@ -0,0 +1,77 @@
+.. SPDX-License-Identifier: GPL-2.0-only
+
+=======================
+S3C24XX CPUfreq support
+=======================
+
+Introduction
+------------
+
+ The S3C24XX series support a number of power saving systems, such as
+ the ability to change the core, memory and peripheral operating
+ frequencies. The core control is exported via the CPUFreq driver
+ which has a number of different manual or automatic controls over the
+ rate the core is running at.
+
+ There are two forms of the driver depending on the specific CPU and
+ how the clocks are arranged. The first implementation used as single
+ PLL to feed the ARM, memory and peripherals via a series of dividers
+ and muxes and this is the implementation that is documented here. A
+ newer version where there is a separate PLL and clock divider for the
+ ARM core is available as a separate driver.
+
+
+Layout
+------
+
+ The code core manages the CPU specific drivers, any data that they
+ need to register and the interface to the generic drivers/cpufreq
+ system. Each CPU registers a driver to control the PLL, clock dividers
+ and anything else associated with it. Any board that wants to use this
+ framework needs to supply at least basic details of what is required.
+
+ The core registers with drivers/cpufreq at init time if all the data
+ necessary has been supplied.
+
+
+CPU support
+-----------
+
+ The support for each CPU depends on the facilities provided by the
+ SoC and the driver as each device has different PLL and clock chains
+ associated with it.
+
+
+Slow Mode
+---------
+
+ The SLOW mode where the PLL is turned off altogether and the
+ system is fed by the external crystal input is currently not
+ supported.
+
+
+sysfs
+-----
+
+ The core code exports extra information via sysfs in the directory
+ devices/system/cpu/cpu0/arch-freq.
+
+
+Board Support
+-------------
+
+ Each board that wants to use the cpufreq code must register some basic
+ information with the core driver to provide information about what the
+ board requires and any restrictions being placed on it.
+
+ The board needs to supply information about whether it needs the IO bank
+ timings changing, any maximum frequency limits and information about the
+ SDRAM refresh rate.
+
+
+
+
+Document Author
+---------------
+
+Ben Dooks, Copyright 2009 Simtec Electronics
diff --git a/Documentation/arm/samsung-s3c24xx/eb2410itx.rst b/Documentation/arm/samsung-s3c24xx/eb2410itx.rst
new file mode 100644
index 000000000..7863c9365
--- /dev/null
+++ b/Documentation/arm/samsung-s3c24xx/eb2410itx.rst
@@ -0,0 +1,59 @@
+===================================
+Simtec Electronics EB2410ITX (BAST)
+===================================
+
+	http://www.simtec.co.uk/products/EB2410ITX/
+
+Introduction
+------------
+
+  The EB2410ITX is a S3C2410 based development board with a variety of
+  peripherals and expansion connectors. This board is also known by
+  the shortened name of Bast.
+
+
+Configuration
+-------------
+
+  To set the default configuration, use `make bast_defconfig` which
+  supports the commonly used features of this board.
+
+
+Support
+-------
+
+  Official support information can be found on the Simtec Electronics
+  website, at the product page http://www.simtec.co.uk/products/EB2410ITX/
+
+  Useful links:
+
+    - Resources Page http://www.simtec.co.uk/products/EB2410ITX/resources.html
+
+    - Board FAQ at http://www.simtec.co.uk/products/EB2410ITX/faq.html
+
+    - Bootloader info http://www.simtec.co.uk/products/SWABLE/resources.html
+      and FAQ http://www.simtec.co.uk/products/SWABLE/faq.html
+
+
+MTD
+---
+
+  The NAND and NOR support has been merged from the linux-mtd project.
+  Any problems, see http://www.linux-mtd.infradead.org/ for more
+  information or up-to-date versions of linux-mtd.
+
+
+IDE
+---
+
+  Both onboard IDE ports are supported, however there is no support for
+  changing speed of devices, PIO Mode 4 capable drives should be used.
+
+
+Maintainers
+-----------
+
+  This board is maintained by Simtec Electronics.
+
+
+Copyright 2004 Ben Dooks, Simtec Electronics
diff --git a/Documentation/arm/samsung-s3c24xx/gpio.rst b/Documentation/arm/samsung-s3c24xx/gpio.rst
new file mode 100644
index 000000000..f4a8c800a
--- /dev/null
+++ b/Documentation/arm/samsung-s3c24xx/gpio.rst
@@ -0,0 +1,172 @@
+====================
+S3C24XX GPIO Control
+====================
+
+Introduction
+------------
+
+  The s3c2410 kernel provides an interface to configure and
+  manipulate the state of the GPIO pins, and find out other
+  information about them.
+
+  There are a number of conditions attached to the configuration
+  of the s3c2410 GPIO system, please read the Samsung provided
+  data-sheet/users manual to find out the complete list.
+
+  See Documentation/arm/samsung/gpio.rst for the core implementation.
+
+
+GPIOLIB
+-------
+
+  With the event of the GPIOLIB in drivers/gpio, support for some
+  of the GPIO functions such as reading and writing a pin will
+  be removed in favour of this common access method.
+
+  Once all the extant drivers have been converted, the functions
+  listed below will be removed (they may be marked as __deprecated
+  in the near future).
+
+  The following functions now either have a `s3c_` specific variant
+  or are merged into gpiolib. See the definitions in
+  arch/arm/mach-s3c/gpio-cfg.h:
+
+  - s3c2410_gpio_setpin()	gpio_set_value() or gpio_direction_output()
+  - s3c2410_gpio_getpin()	gpio_get_value() or gpio_direction_input()
+  - s3c2410_gpio_getirq()	gpio_to_irq()
+  - s3c2410_gpio_cfgpin()	s3c_gpio_cfgpin()
+  - s3c2410_gpio_getcfg()	s3c_gpio_getcfg()
+  - s3c2410_gpio_pullup()	s3c_gpio_setpull()
+
+
+GPIOLIB conversion
+------------------
+
+If you need to convert your board or driver to use gpiolib from the phased
+out s3c2410 API, then here are some notes on the process.
+
+1) If your board is exclusively using an GPIO, say to control peripheral
+   power, then it will require to claim the gpio with gpio_request() before
+   it can use it.
+
+   It is recommended to check the return value, with at least WARN_ON()
+   during initialisation.
+
+2) The s3c2410_gpio_cfgpin() can be directly replaced with s3c_gpio_cfgpin()
+   as they have the same arguments, and can either take the pin specific
+   values, or the more generic special-function-number arguments.
+
+3) s3c2410_gpio_pullup() changes have the problem that while the
+   s3c2410_gpio_pullup(x, 1) can be easily translated to the
+   s3c_gpio_setpull(x, S3C_GPIO_PULL_NONE), the s3c2410_gpio_pullup(x, 0)
+   are not so easy.
+
+   The s3c2410_gpio_pullup(x, 0) case enables the pull-up (or in the case
+   of some of the devices, a pull-down) and as such the new API distinguishes
+   between the UP and DOWN case. There is currently no 'just turn on' setting
+   which may be required if this becomes a problem.
+
+4) s3c2410_gpio_setpin() can be replaced by gpio_set_value(), the old call
+   does not implicitly configure the relevant gpio to output. The gpio
+   direction should be changed before using gpio_set_value().
+
+5) s3c2410_gpio_getpin() is replaceable by gpio_get_value() if the pin
+   has been set to input. It is currently unknown what the behaviour is
+   when using gpio_get_value() on an output pin (s3c2410_gpio_getpin
+   would return the value the pin is supposed to be outputting).
+
+6) s3c2410_gpio_getirq() should be directly replaceable with the
+   gpio_to_irq() call.
+
+The s3c2410_gpio and `gpio_` calls have always operated on the same gpio
+numberspace, so there is no problem with converting the gpio numbering
+between the calls.
+
+
+Headers
+-------
+
+  See arch/arm/mach-s3c/regs-gpio-s3c24xx.h for the list
+  of GPIO pins, and the configuration values for them. This
+  is included by using #include <mach/regs-gpio.h>
+
+
+PIN Numbers
+-----------
+
+  Each pin has an unique number associated with it in regs-gpio.h,
+  e.g. S3C2410_GPA(0) or S3C2410_GPF(1). These defines are used to tell
+  the GPIO functions which pin is to be used.
+
+  With the conversion to gpiolib, there is no longer a direct conversion
+  from gpio pin number to register base address as in earlier kernels. This
+  is due to the number space required for newer SoCs where the later
+  GPIOs are not contiguous.
+
+
+Configuring a pin
+-----------------
+
+  The following function allows the configuration of a given pin to
+  be changed.
+
+    void s3c_gpio_cfgpin(unsigned int pin, unsigned int function);
+
+  e.g.:
+
+     s3c_gpio_cfgpin(S3C2410_GPA(0), S3C_GPIO_SFN(1));
+     s3c_gpio_cfgpin(S3C2410_GPE(8), S3C_GPIO_SFN(2));
+
+   which would turn GPA(0) into the lowest Address line A0, and set
+   GPE(8) to be connected to the SDIO/MMC controller's SDDAT1 line.
+
+
+Reading the current configuration
+---------------------------------
+
+  The current configuration of a pin can be read by using standard
+  gpiolib function:
+
+  s3c_gpio_getcfg(unsigned int pin);
+
+  The return value will be from the same set of values which can be
+  passed to s3c_gpio_cfgpin().
+
+
+Configuring a pull-up resistor
+------------------------------
+
+  A large proportion of the GPIO pins on the S3C2410 can have weak
+  pull-up resistors enabled. This can be configured by the following
+  function:
+
+    void s3c_gpio_setpull(unsigned int pin, unsigned int to);
+
+  Where the to value is S3C_GPIO_PULL_NONE to set the pull-up off,
+  and S3C_GPIO_PULL_UP to enable the specified pull-up. Any other
+  values are currently undefined.
+
+
+Getting and setting the state of a PIN
+--------------------------------------
+
+  These calls are now implemented by the relevant gpiolib calls, convert
+  your board or driver to use gpiolib.
+
+
+Getting the IRQ number associated with a PIN
+--------------------------------------------
+
+  A standard gpiolib function can map the given pin number to an IRQ
+  number to pass to the IRQ system.
+
+   int gpio_to_irq(unsigned int pin);
+
+  Note, not all pins have an IRQ.
+
+
+Author
+-------
+
+Ben Dooks, 03 October 2004
+Copyright 2004 Ben Dooks, Simtec Electronics
diff --git a/Documentation/arm/samsung-s3c24xx/h1940.rst b/Documentation/arm/samsung-s3c24xx/h1940.rst
new file mode 100644
index 000000000..62a562c17
--- /dev/null
+++ b/Documentation/arm/samsung-s3c24xx/h1940.rst
@@ -0,0 +1,41 @@
+=============
+HP IPAQ H1940
+=============
+
+http://www.handhelds.org/projects/h1940.html
+
+Introduction
+------------
+
+  The HP H1940 is a S3C2410 based handheld device, with
+  bluetooth connectivity.
+
+
+Support
+-------
+
+  A variety of information is available
+
+  handhelds.org project page:
+
+    http://www.handhelds.org/projects/h1940.html
+
+  handhelds.org wiki page:
+
+    http://handhelds.org/moin/moin.cgi/HpIpaqH1940
+
+  Herbert Pötzl pages:
+
+    http://vserver.13thfloor.at/H1940/
+
+
+Maintainers
+-----------
+
+  This project is being maintained and developed by a variety
+  of people, including Ben Dooks, Arnaud Patard, and Herbert Pötzl.
+
+  Thanks to the many others who have also provided support.
+
+
+(c) 2005 Ben Dooks
diff --git a/Documentation/arm/samsung-s3c24xx/index.rst b/Documentation/arm/samsung-s3c24xx/index.rst
new file mode 100644
index 000000000..ccb951a0b
--- /dev/null
+++ b/Documentation/arm/samsung-s3c24xx/index.rst
@@ -0,0 +1,20 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+==========================
+Samsung S3C24XX SoC Family
+==========================
+
+.. toctree::
+   :maxdepth: 1
+
+   h1940
+   gpio
+   cpufreq
+   suspend
+   usb-host
+   s3c2412
+   eb2410itx
+   nand
+   smdk2440
+   s3c2413
+   overview
diff --git a/Documentation/arm/samsung-s3c24xx/nand.rst b/Documentation/arm/samsung-s3c24xx/nand.rst
new file mode 100644
index 000000000..938995694
--- /dev/null
+++ b/Documentation/arm/samsung-s3c24xx/nand.rst
@@ -0,0 +1,30 @@
+====================
+S3C24XX NAND Support
+====================
+
+Introduction
+------------
+
+Small Page NAND
+---------------
+
+The driver uses a 512 byte (1 page) ECC code for this setup. The
+ECC code is not directly compatible with the default kernel ECC
+code, so the driver enforces its own OOB layout and ECC parameters
+
+Large Page NAND
+---------------
+
+The driver is capable of handling NAND flash with a 2KiB page
+size, with support for hardware ECC generation and correction.
+
+Unlike the 512byte page mode, the driver generates ECC data for
+each 256 byte block in an 2KiB page. This means that more than
+one error in a page can be rectified. It also means that the
+OOB layout remains the default kernel layout for these flashes.
+
+
+Document Author
+---------------
+
+Ben Dooks, Copyright 2007 Simtec Electronics
diff --git a/Documentation/arm/samsung-s3c24xx/overview.rst b/Documentation/arm/samsung-s3c24xx/overview.rst
new file mode 100644
index 000000000..14535e5cf
--- /dev/null
+++ b/Documentation/arm/samsung-s3c24xx/overview.rst
@@ -0,0 +1,311 @@
+==========================
+S3C24XX ARM Linux Overview
+==========================
+
+
+
+Introduction
+------------
+
+  The Samsung S3C24XX range of ARM9 System-on-Chip CPUs are supported
+  by the 's3c2410' architecture of ARM Linux. Currently the S3C2410,
+  S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443 and S3C2450 devices
+  are supported.
+
+  Support for the S3C2400 and S3C24A0 series was never completed and the
+  corresponding code has been removed after a while.  If someone wishes to
+  revive this effort, partial support can be retrieved from earlier Linux
+  versions.
+
+  The S3C2416 and S3C2450 devices are very similar and S3C2450 support is
+  included under the arch/arm/mach-s3c directory. Note, while core
+  support for these SoCs is in, work on some of the extra peripherals
+  and extra interrupts is still ongoing.
+
+
+Configuration
+-------------
+
+  A generic S3C2410 configuration is provided, and can be used as the
+  default by `make s3c2410_defconfig`. This configuration has support
+  for all the machines, and the commonly used features on them.
+
+  Certain machines may have their own default configurations as well,
+  please check the machine specific documentation.
+
+
+Layout
+------
+
+  The core support files, register, kernel and paltform data are located in the
+  platform code contained in arch/arm/mach-s3c with headers in
+  arch/arm/mach-s3c/include
+
+arch/arm/mach-s3c:
+
+  Files in here are either common to all the s3c24xx family,
+  or are common to only some of them with names to indicate this
+  status. The files that are not common to all are generally named
+  with the initial cpu they support in the series to ensure a short
+  name without any possibility of confusion with newer devices.
+
+  As an example, initially s3c244x would cover s3c2440 and s3c2442, but
+  with the s3c2443 which does not share many of the same drivers in
+  this directory, the name becomes invalid. We stick to s3c2440-<x>
+  to indicate a driver that is s3c2440 and s3c2442 compatible.
+
+  This does mean that to find the status of any given SoC, a number
+  of directories may need to be searched.
+
+
+Machines
+--------
+
+  The currently supported machines are as follows:
+
+  Simtec Electronics EB2410ITX (BAST)
+
+    A general purpose development board, see EB2410ITX.txt for further
+    details
+
+  Simtec Electronics IM2440D20 (Osiris)
+
+    CPU Module from Simtec Electronics, with a S3C2440A CPU, nand flash
+    and a PCMCIA controller.
+
+  Samsung SMDK2410
+
+    Samsung's own development board, geared for PDA work.
+
+  Samsung/Aiji SMDK2412
+
+    The S3C2412 version of the SMDK2440.
+
+  Samsung/Aiji SMDK2413
+
+    The S3C2412 version of the SMDK2440.
+
+  Samsung/Meritech SMDK2440
+
+    The S3C2440 compatible version of the SMDK2440, which has the
+    option of an S3C2440 or S3C2442 CPU module.
+
+  Thorcom VR1000
+
+    Custom embedded board
+
+  HP IPAQ 1940
+
+    Handheld (IPAQ), available in several varieties
+
+  HP iPAQ rx3715
+
+    S3C2440 based IPAQ, with a number of variations depending on
+    features shipped.
+
+  Acer N30
+
+    A S3C2410 based PDA from Acer.  There is a Wiki page at
+    http://handhelds.org/moin/moin.cgi/AcerN30Documentation .
+
+  AML M5900
+
+    American Microsystems' M5900
+
+  Nex Vision Nexcoder
+  Nex Vision Otom
+
+    Two machines by Nex Vision
+
+
+Adding New Machines
+-------------------
+
+  The architecture has been designed to support as many machines as can
+  be configured for it in one kernel build, and any future additions
+  should keep this in mind before altering items outside of their own
+  machine files.
+
+  Machine definitions should be kept in arch/arm/mach-s3c,
+  and there are a number of examples that can be looked at.
+
+  Read the kernel patch submission policies as well as the
+  Documentation/arm directory before submitting patches. The
+  ARM kernel series is managed by Russell King, and has a patch system
+  located at http://www.arm.linux.org.uk/developer/patches/
+  as well as mailing lists that can be found from the same site.
+
+  As a courtesy, please notify <ben-linux@fluff.org> of any new
+  machines or other modifications.
+
+  Any large scale modifications, or new drivers should be discussed
+  on the ARM kernel mailing list (linux-arm-kernel) before being
+  attempted. See http://www.arm.linux.org.uk/mailinglists/ for the
+  mailing list information.
+
+
+I2C
+---
+
+  The hardware I2C core in the CPU is supported in single master
+  mode, and can be configured via platform data.
+
+
+RTC
+---
+
+  Support for the onboard RTC unit, including alarm function.
+
+  This has recently been upgraded to use the new RTC core,
+  and the module has been renamed to rtc-s3c to fit in with
+  the new rtc naming scheme.
+
+
+Watchdog
+--------
+
+  The onchip watchdog is available via the standard watchdog
+  interface.
+
+
+NAND
+----
+
+  The current kernels now have support for the s3c2410 NAND
+  controller. If there are any problems the latest linux-mtd
+  code can be found from http://www.linux-mtd.infradead.org/
+
+  For more information see Documentation/arm/samsung-s3c24xx/nand.rst
+
+
+SD/MMC
+------
+
+  The SD/MMC hardware pre S3C2443 is supported in the current
+  kernel, the driver is drivers/mmc/host/s3cmci.c and supports
+  1 and 4 bit SD or MMC cards.
+
+  The SDIO behaviour of this driver has not been fully tested. There is no
+  current support for hardware SDIO interrupts.
+
+
+Serial
+------
+
+  The s3c2410 serial driver provides support for the internal
+  serial ports. These devices appear as /dev/ttySAC0 through 3.
+
+  To create device nodes for these, use the following commands
+
+    mknod ttySAC0 c 204 64
+    mknod ttySAC1 c 204 65
+    mknod ttySAC2 c 204 66
+
+
+GPIO
+----
+
+  The core contains support for manipulating the GPIO, see the
+  documentation in GPIO.txt in the same directory as this file.
+
+  Newer kernels carry GPIOLIB, and support is being moved towards
+  this with some of the older support in line to be removed.
+
+  As of v2.6.34, the move towards using gpiolib support is almost
+  complete, and very little of the old calls are left.
+
+  See Documentation/arm/samsung-s3c24xx/gpio.rst for the S3C24XX specific
+  support and Documentation/arm/samsung/gpio.rst for the core Samsung
+  implementation.
+
+
+Clock Management
+----------------
+
+  The core provides the interface defined in the header file
+  include/asm-arm/hardware/clock.h, to allow control over the
+  various clock units
+
+
+Suspend to RAM
+--------------
+
+  For boards that provide support for suspend to RAM, the
+  system can be placed into low power suspend.
+
+  See Suspend.txt for more information.
+
+
+SPI
+---
+
+  SPI drivers are available for both the in-built hardware
+  (although there is no DMA support yet) and a generic
+  GPIO based solution.
+
+
+LEDs
+----
+
+  There is support for GPIO based LEDs via a platform driver
+  in the LED subsystem.
+
+
+Platform Data
+-------------
+
+  Whenever a device has platform specific data that is specified
+  on a per-machine basis, care should be taken to ensure the
+  following:
+
+    1) that default data is not left in the device to confuse the
+       driver if a machine does not set it at startup
+
+    2) the data should (if possible) be marked as __initdata,
+       to ensure that the data is thrown away if the machine is
+       not the one currently in use.
+
+       The best way of doing this is to make a function that
+       kmalloc()s an area of memory, and copies the __initdata
+       and then sets the relevant device's platform data. Making
+       the function `__init` takes care of ensuring it is discarded
+       with the rest of the initialisation code::
+
+         static __init void s3c24xx_xxx_set_platdata(struct xxx_data *pd)
+         {
+             struct s3c2410_xxx_mach_info *npd;
+
+	   npd = kmalloc(sizeof(struct s3c2410_xxx_mach_info), GFP_KERNEL);
+	   if (npd) {
+	      memcpy(npd, pd, sizeof(struct s3c2410_xxx_mach_info));
+	      s3c_device_xxx.dev.platform_data = npd;
+	   } else {
+                printk(KERN_ERR "no memory for xxx platform data\n");
+	   }
+	}
+
+	Note, since the code is marked as __init, it should not be
+	exported outside arch/arm/mach-s3c/, or exported to
+	modules via EXPORT_SYMBOL() and related functions.
+
+
+Port Contributors
+-----------------
+
+  Ben Dooks (BJD)
+  Vincent Sanders
+  Herbert Potzl
+  Arnaud Patard (RTP)
+  Roc Wu
+  Klaus Fetscher
+  Dimitry Andric
+  Shannon Holland
+  Guillaume Gourat (NexVision)
+  Christer Weinigel (wingel) (Acer N30)
+  Lucas Correia Villa Real (S3C2400 port)
+
+
+Document Author
+---------------
+
+Ben Dooks, Copyright 2004-2006 Simtec Electronics
diff --git a/Documentation/arm/samsung-s3c24xx/s3c2412.rst b/Documentation/arm/samsung-s3c24xx/s3c2412.rst
new file mode 100644
index 000000000..68b985fc6
--- /dev/null
+++ b/Documentation/arm/samsung-s3c24xx/s3c2412.rst
@@ -0,0 +1,121 @@
+==========================
+S3C2412 ARM Linux Overview
+==========================
+
+Introduction
+------------
+
+  The S3C2412 is part of the S3C24XX range of ARM9 System-on-Chip CPUs
+  from Samsung. This part has an ARM926-EJS core, capable of running up
+  to 266MHz (see data-sheet for more information)
+
+
+Clock
+-----
+
+  The core clock code provides a set of clocks to the drivers, and allows
+  for source selection and a number of other features.
+
+
+Power
+-----
+
+  No support for suspend/resume to RAM in the current system.
+
+
+DMA
+---
+
+  No current support for DMA.
+
+
+GPIO
+----
+
+  There is support for setting the GPIO to input/output/special function
+  and reading or writing to them.
+
+
+UART
+----
+
+  The UART hardware is similar to the S3C2440, and is supported by the
+  s3c2410 driver in the drivers/serial directory.
+
+
+NAND
+----
+
+  The NAND hardware is similar to the S3C2440, and is supported by the
+  s3c2410 driver in the drivers/mtd/nand/raw directory.
+
+
+USB Host
+--------
+
+  The USB hardware is similar to the S3C2410, with extended clock source
+  control. The OHCI portion is supported by the ohci-s3c2410 driver, and
+  the clock control selection is supported by the core clock code.
+
+
+USB Device
+----------
+
+  No current support in the kernel
+
+
+IRQs
+----
+
+  All the standard, and external interrupt sources are supported. The
+  extra sub-sources are not yet supported.
+
+
+RTC
+---
+
+  The RTC hardware is similar to the S3C2410, and is supported by the
+  s3c2410-rtc driver.
+
+
+Watchdog
+--------
+
+  The watchdog hardware is the same as the S3C2410, and is supported by
+  the s3c2410_wdt driver.
+
+
+MMC/SD/SDIO
+-----------
+
+  No current support for the MMC/SD/SDIO block.
+
+IIC
+---
+
+  The IIC hardware is the same as the S3C2410, and is supported by the
+  i2c-s3c24xx driver.
+
+
+IIS
+---
+
+  No current support for the IIS interface.
+
+
+SPI
+---
+
+  No current support for the SPI interfaces.
+
+
+ATA
+---
+
+  No current support for the on-board ATA block.
+
+
+Document Author
+---------------
+
+Ben Dooks, Copyright 2006 Simtec Electronics
diff --git a/Documentation/arm/samsung-s3c24xx/s3c2413.rst b/Documentation/arm/samsung-s3c24xx/s3c2413.rst
new file mode 100644
index 000000000..1f51e207f
--- /dev/null
+++ b/Documentation/arm/samsung-s3c24xx/s3c2413.rst
@@ -0,0 +1,22 @@
+==========================
+S3C2413 ARM Linux Overview
+==========================
+
+Introduction
+------------
+
+  The S3C2413 is an extended version of the S3C2412, with an camera
+  interface and mobile DDR memory support. See the S3C2412 support
+  documentation for more information.
+
+
+Camera Interface
+----------------
+
+  This block is currently not supported.
+
+
+Document Author
+---------------
+
+Ben Dooks, Copyright 2006 Simtec Electronics
diff --git a/Documentation/arm/samsung-s3c24xx/smdk2440.rst b/Documentation/arm/samsung-s3c24xx/smdk2440.rst
new file mode 100644
index 000000000..524fd0b4a
--- /dev/null
+++ b/Documentation/arm/samsung-s3c24xx/smdk2440.rst
@@ -0,0 +1,57 @@
+=========================
+Samsung/Meritech SMDK2440
+=========================
+
+Introduction
+------------
+
+  The SMDK2440 is a two part evaluation board for the Samsung S3C2440
+  processor. It includes support for LCD, SmartMedia, Audio, SD and
+  10MBit Ethernet, and expansion headers for various signals, including
+  the camera and unused GPIO.
+
+
+Configuration
+-------------
+
+  To set the default configuration, use `make smdk2440_defconfig` which
+  will configure the common features of this board, or use
+  `make s3c2410_config` to include support for all s3c2410/s3c2440 machines
+
+
+Support
+-------
+
+  Ben Dooks' SMDK2440 site at http://www.fluff.org/ben/smdk2440/ which
+  includes linux based USB download tools.
+
+  Some of the h1940 patches that can be found from the H1940 project
+  site at http://www.handhelds.org/projects/h1940.html can also be
+  applied to this board.
+
+
+Peripherals
+-----------
+
+  There is no current support for any of the extra peripherals on the
+  base-board itself.
+
+
+MTD
+---
+
+  The NAND flash should be supported by the in kernel MTD NAND support,
+  NOR flash will be added later.
+
+
+Maintainers
+-----------
+
+  This board is being maintained by Ben Dooks, for more info, see
+  http://www.fluff.org/ben/smdk2440/
+
+  Many thanks to Dimitry Andric of TomTom for the loan of the SMDK2440,
+  and to Simtec Electronics for allowing me time to work on this.
+
+
+(c) 2004 Ben Dooks
diff --git a/Documentation/arm/samsung-s3c24xx/suspend.rst b/Documentation/arm/samsung-s3c24xx/suspend.rst
new file mode 100644
index 000000000..b4f3ae9fe
--- /dev/null
+++ b/Documentation/arm/samsung-s3c24xx/suspend.rst
@@ -0,0 +1,137 @@
+=======================
+S3C24XX Suspend Support
+=======================
+
+
+Introduction
+------------
+
+  The S3C24XX supports a low-power suspend mode, where the SDRAM is kept
+  in Self-Refresh mode, and all but the essential peripheral blocks are
+  powered down. For more information on how this works, please look
+  at the relevant CPU datasheet from Samsung.
+
+
+Requirements
+------------
+
+  1) A bootloader that can support the necessary resume operation
+
+  2) Support for at least 1 source for resume
+
+  3) CONFIG_PM enabled in the kernel
+
+  4) Any peripherals that are going to be powered down at the same
+     time require suspend/resume support.
+
+
+Resuming
+--------
+
+  The S3C2410 user manual defines the process of sending the CPU to
+  sleep and how it resumes. The default behaviour of the Linux code
+  is to set the GSTATUS3 register to the physical address of the
+  code to resume Linux operation.
+
+  GSTATUS4 is currently left alone by the sleep code, and is free to
+  use for any other purposes (for example, the EB2410ITX uses this to
+  save memory configuration in).
+
+
+Machine Support
+---------------
+
+  The machine specific functions must call the s3c_pm_init() function
+  to say that its bootloader is capable of resuming. This can be as
+  simple as adding the following to the machine's definition:
+
+  INITMACHINE(s3c_pm_init)
+
+  A board can do its own setup before calling s3c_pm_init, if it
+  needs to setup anything else for power management support.
+
+  There is currently no support for over-riding the default method of
+  saving the resume address, if your board requires it, then contact
+  the maintainer and discuss what is required.
+
+  Note, the original method of adding an late_initcall() is wrong,
+  and will end up initialising all compiled machines' pm init!
+
+  The following is an example of code used for testing wakeup from
+  an falling edge on IRQ_EINT0::
+
+
+    static irqreturn_t button_irq(int irq, void *pw)
+    {
+	return IRQ_HANDLED;
+    }
+
+    statuc void __init machine_init(void)
+    {
+	...
+
+	request_irq(IRQ_EINT0, button_irq, IRQF_TRIGGER_FALLING,
+		   "button-irq-eint0", NULL);
+
+	enable_irq_wake(IRQ_EINT0);
+
+	s3c_pm_init();
+    }
+
+
+Debugging
+---------
+
+  There are several important things to remember when using PM suspend:
+
+  1) The uart drivers will disable the clocks to the UART blocks when
+     suspending, which means that use of printascii() or similar direct
+     access to the UARTs will cause the debug to stop.
+
+  2) While the pm code itself will attempt to re-enable the UART clocks,
+     care should be taken that any external clock sources that the UARTs
+     rely on are still enabled at that point.
+
+  3) If any debugging is placed in the resume path, then it must have the
+     relevant clocks and peripherals setup before use (ie, bootloader).
+
+     For example, if you transmit a character from the UART, the baud
+     rate and uart controls must be setup beforehand.
+
+
+Configuration
+-------------
+
+  The S3C2410 specific configuration in `System Type` defines various
+  aspects of how the S3C2410 suspend and resume support is configured
+
+  `S3C2410 PM Suspend debug`
+
+    This option prints messages to the serial console before and after
+    the actual suspend, giving detailed information on what is
+    happening
+
+
+  `S3C2410 PM Suspend Memory CRC`
+
+    Allows the entire memory to be checksummed before and after the
+    suspend to see if there has been any corruption of the contents.
+
+    Note, the time to calculate the CRC is dependent on the CPU speed
+    and the size of memory. For an 64Mbyte RAM area on an 200MHz
+    S3C2410, this can take approximately 4 seconds to complete.
+
+    This support requires the CRC32 function to be enabled.
+
+
+  `S3C2410 PM Suspend CRC Chunksize (KiB)`
+
+    Defines the size of memory each CRC chunk covers. A smaller value
+    will mean that the CRC data block will take more memory, but will
+    identify any faults with better precision
+
+
+Document Author
+---------------
+
+Ben Dooks, Copyright 2004 Simtec Electronics
diff --git a/Documentation/arm/samsung-s3c24xx/usb-host.rst b/Documentation/arm/samsung-s3c24xx/usb-host.rst
new file mode 100644
index 000000000..7aaffac89
--- /dev/null
+++ b/Documentation/arm/samsung-s3c24xx/usb-host.rst
@@ -0,0 +1,91 @@
+========================
+S3C24XX USB Host support
+========================
+
+
+
+Introduction
+------------
+
+  This document details the S3C2410/S3C2440 in-built OHCI USB host support.
+
+Configuration
+-------------
+
+  Enable at least the following kernel options:
+
+  menuconfig::
+
+   Device Drivers  --->
+     USB support  --->
+       <*> Support for Host-side USB
+       <*>   OHCI HCD support
+
+
+  .config:
+
+    - CONFIG_USB
+    - CONFIG_USB_OHCI_HCD
+
+
+  Once these options are configured, the standard set of USB device
+  drivers can be configured and used.
+
+
+Board Support
+-------------
+
+  The driver attaches to a platform device, which will need to be
+  added by the board specific support file in arch/arm/mach-s3c,
+  such as mach-bast.c or mach-smdk2410.c
+
+  The platform device's platform_data field is only needed if the
+  board implements extra power control or over-current monitoring.
+
+  The OHCI driver does not ensure the state of the S3C2410's MISCCTRL
+  register, so if both ports are to be used for the host, then it is
+  the board support file's responsibility to ensure that the second
+  port is configured to be connected to the OHCI core.
+
+
+Platform Data
+-------------
+
+  See include/linux/platform_data/usb-ohci-s3c2410.h for the
+  descriptions of the platform device data. An implementation
+  can be found in arch/arm/mach-s3c/simtec-usb.c .
+
+  The `struct s3c2410_hcd_info` contains a pair of functions
+  that get called to enable over-current detection, and to
+  control the port power status.
+
+  The ports are numbered 0 and 1.
+
+  power_control:
+    Called to enable or disable the power on the port.
+
+  enable_oc:
+    Called to enable or disable the over-current monitoring.
+    This should claim or release the resources being used to
+    check the power condition on the port, such as an IRQ.
+
+  report_oc:
+    The OHCI driver fills this field in for the over-current code
+    to call when there is a change to the over-current state on
+    an port. The ports argument is a bitmask of 1 bit per port,
+    with bit X being 1 for an over-current on port X.
+
+    The function s3c2410_usb_report_oc() has been provided to
+    ensure this is called correctly.
+
+  port[x]:
+    This is struct describes each port, 0 or 1. The platform driver
+    should set the flags field of each port to S3C_HCDFLG_USED if
+    the port is enabled.
+
+
+
+Document Author
+---------------
+
+Ben Dooks, Copyright 2005 Simtec Electronics
diff --git a/Documentation/arm/samsung/bootloader-interface.rst b/Documentation/arm/samsung/bootloader-interface.rst
new file mode 100644
index 000000000..a56f325da
--- /dev/null
+++ b/Documentation/arm/samsung/bootloader-interface.rst
@@ -0,0 +1,81 @@
+==========================================================
+Interface between kernel and boot loaders on Exynos boards
+==========================================================
+
+Author: Krzysztof Kozlowski
+
+Date  : 6 June 2015
+
+The document tries to describe currently used interface between Linux kernel
+and boot loaders on Samsung Exynos based boards. This is not a definition
+of interface but rather a description of existing state, a reference
+for information purpose only.
+
+In the document "boot loader" means any of following: U-boot, proprietary
+SBOOT or any other firmware for ARMv7 and ARMv8 initializing the board before
+executing kernel.
+
+
+1. Non-Secure mode
+
+Address:      sysram_ns_base_addr
+
+============= ============================================ ==================
+Offset        Value                                        Purpose
+============= ============================================ ==================
+0x08          exynos_cpu_resume_ns, mcpm_entry_point       System suspend
+0x0c          0x00000bad (Magic cookie)                    System suspend
+0x1c          exynos4_secondary_startup                    Secondary CPU boot
+0x1c + 4*cpu  exynos4_secondary_startup (Exynos4412)       Secondary CPU boot
+0x20          0xfcba0d10 (Magic cookie)                    AFTR
+0x24          exynos_cpu_resume_ns                         AFTR
+0x28 + 4*cpu  0x8 (Magic cookie, Exynos3250)               AFTR
+0x28          0x0 or last value during resume (Exynos542x) System suspend
+============= ============================================ ==================
+
+
+2. Secure mode
+
+Address:      sysram_base_addr
+
+============= ============================================ ==================
+Offset        Value                                        Purpose
+============= ============================================ ==================
+0x00          exynos4_secondary_startup                    Secondary CPU boot
+0x04          exynos4_secondary_startup (Exynos542x)       Secondary CPU boot
+4*cpu         exynos4_secondary_startup (Exynos4412)       Secondary CPU boot
+0x20          exynos_cpu_resume (Exynos4210 r1.0)          AFTR
+0x24          0xfcba0d10 (Magic cookie, Exynos4210 r1.0)   AFTR
+============= ============================================ ==================
+
+Address:      pmu_base_addr
+
+============= ============================================ ==================
+Offset        Value                                        Purpose
+============= ============================================ ==================
+0x0800        exynos_cpu_resume                            AFTR, suspend
+0x0800        mcpm_entry_point (Exynos542x with MCPM)      AFTR, suspend
+0x0804        0xfcba0d10 (Magic cookie)                    AFTR
+0x0804        0x00000bad (Magic cookie)                    System suspend
+0x0814        exynos4_secondary_startup (Exynos4210 r1.1)  Secondary CPU boot
+0x0818        0xfcba0d10 (Magic cookie, Exynos4210 r1.1)   AFTR
+0x081C        exynos_cpu_resume (Exynos4210 r1.1)          AFTR
+============= ============================================ ==================
+
+3. Other (regardless of secure/non-secure mode)
+
+Address:      pmu_base_addr
+
+============= =============================== ===============================
+Offset        Value                           Purpose
+============= =============================== ===============================
+0x0908        Non-zero                        Secondary CPU boot up indicator
+                                              on Exynos3250 and Exynos542x
+============= =============================== ===============================
+
+
+4. Glossary
+
+AFTR - ARM Off Top Running, a low power mode, Cortex cores and many other
+modules are power gated, except the TOP modules
+MCPM - Multi-Cluster Power Management
diff --git a/Documentation/arm/samsung/clksrc-change-registers.awk b/Documentation/arm/samsung/clksrc-change-registers.awk
new file mode 100755
index 000000000..7be1b8aa7
--- /dev/null
+++ b/Documentation/arm/samsung/clksrc-change-registers.awk
@@ -0,0 +1,166 @@
+#!/usr/bin/awk -f
+#
+# Copyright 2010 Ben Dooks <ben-linux@fluff.org>
+#
+# Released under GPLv2
+
+# example usage
+# ./clksrc-change-registers.awk arch/arm/plat-s5pc1xx/include/plat/regs-clock.h < src > dst
+
+function extract_value(s)
+{
+    eqat = index(s, "=")
+    comat = index(s, ",")
+    return substr(s, eqat+2, (comat-eqat)-2)
+}
+
+function remove_brackets(b)
+{
+    return substr(b, 2, length(b)-2)
+}
+
+function splitdefine(l, p)
+{
+    r = split(l, tp)
+
+    p[0] = tp[2]
+    p[1] = remove_brackets(tp[3])
+}
+
+function find_length(f)
+{
+    if (0)
+	printf "find_length " f "\n" > "/dev/stderr"
+
+    if (f ~ /0x1/)
+	return 1
+    else if (f ~ /0x3/)
+	return 2
+    else if (f ~ /0x7/)
+	return 3
+    else if (f ~ /0xf/)
+	return 4
+
+    printf "unknown length " f "\n" > "/dev/stderr"
+    exit
+}
+
+function find_shift(s)
+{
+    id = index(s, "<")
+    if (id <= 0) {
+	printf "cannot find shift " s "\n" > "/dev/stderr"
+	exit
+    }
+
+    return substr(s, id+2)
+}
+
+
+BEGIN {
+    if (ARGC < 2) {
+	print "too few arguments" > "/dev/stderr"
+	exit
+    }
+
+# read the header file and find the mask values that we will need
+# to replace and create an associative array of values
+
+    while (getline line < ARGV[1] > 0) {
+	if (line ~ /\#define.*_MASK/ &&
+	    !(line ~ /USB_SIG_MASK/)) {
+	    splitdefine(line, fields)
+	    name = fields[0]
+	    if (0)
+		printf "MASK " line "\n" > "/dev/stderr"
+	    dmask[name,0] = find_length(fields[1])
+	    dmask[name,1] = find_shift(fields[1])
+	    if (0)
+		printf "=> '" name "' LENGTH=" dmask[name,0] " SHIFT=" dmask[name,1] "\n" > "/dev/stderr"
+	} else {
+	}
+    }
+
+    delete ARGV[1]
+}
+
+/clksrc_clk.*=.*{/ {
+    shift=""
+    mask=""
+    divshift=""
+    reg_div=""
+    reg_src=""
+    indent=1
+
+    print $0
+
+    for(; indent >= 1;) {
+	if ((getline line) <= 0) {
+	    printf "unexpected end of file" > "/dev/stderr"
+	    exit 1;
+	}
+
+	if (line ~ /\.shift/) {
+	    shift = extract_value(line)
+	} else if (line ~ /\.mask/) {
+	    mask = extract_value(line)
+	} else if (line ~ /\.reg_divider/) {
+	    reg_div = extract_value(line)
+	} else if (line ~ /\.reg_source/) {
+	    reg_src = extract_value(line)
+	} else if (line ~ /\.divider_shift/) {
+	    divshift = extract_value(line)
+	} else if (line ~ /{/) {
+		indent++
+		print line
+	    } else if (line ~ /}/) {
+	    indent--
+
+	    if (indent == 0) {
+		if (0) {
+		    printf "shift '" shift   "' ='" dmask[shift,0] "'\n" > "/dev/stderr"
+		    printf "mask  '" mask    "'\n" > "/dev/stderr"
+		    printf "dshft '" divshift "'\n" > "/dev/stderr"
+		    printf "rdiv  '" reg_div "'\n" > "/dev/stderr"
+		    printf "rsrc  '" reg_src "'\n" > "/dev/stderr"
+		}
+
+		generated = mask
+		sub(reg_src, reg_div, generated)
+
+		if (0) {
+		    printf "/* rsrc " reg_src " */\n"
+		    printf "/* rdiv " reg_div " */\n"
+		    printf "/* shift " shift " */\n"
+		    printf "/* mask " mask " */\n"
+		    printf "/* generated " generated " */\n"
+		}
+
+		if (reg_div != "") {
+		    printf "\t.reg_div = { "
+		    printf ".reg = " reg_div ", "
+		    printf ".shift = " dmask[generated,1] ", "
+		    printf ".size = " dmask[generated,0] ", "
+		    printf "},\n"
+		}
+
+		printf "\t.reg_src = { "
+		printf ".reg = " reg_src ", "
+		printf ".shift = " dmask[mask,1] ", "
+		printf ".size = " dmask[mask,0] ", "
+
+		printf "},\n"
+
+	    }
+
+	    print line
+	} else {
+	    print line
+	}
+
+	if (0)
+	    printf indent ":" line "\n" > "/dev/stderr"
+    }
+}
+
+// && ! /clksrc_clk.*=.*{/ { print $0 }
diff --git a/Documentation/arm/samsung/gpio.rst b/Documentation/arm/samsung/gpio.rst
new file mode 100644
index 000000000..f6e27b07c
--- /dev/null
+++ b/Documentation/arm/samsung/gpio.rst
@@ -0,0 +1,40 @@
+===========================
+Samsung GPIO implementation
+===========================
+
+Introduction
+------------
+
+This outlines the Samsung GPIO implementation and the architecture
+specific calls provided alongside the drivers/gpio core.
+
+
+S3C24XX (Legacy)
+----------------
+
+See Documentation/arm/samsung-s3c24xx/gpio.rst for more information
+about these devices. Their implementation has been brought into line
+with the core samsung implementation described in this document.
+
+
+GPIOLIB integration
+-------------------
+
+The gpio implementation uses gpiolib as much as possible, only providing
+specific calls for the items that require Samsung specific handling, such
+as pin special-function or pull resistor control.
+
+GPIO numbering is synchronised between the Samsung and gpiolib system.
+
+
+PIN configuration
+-----------------
+
+Pin configuration is specific to the Samsung architecture, with each SoC
+registering the necessary information for the core gpio configuration
+implementation to configure pins as necessary.
+
+The s3c_gpio_cfgpin() and s3c_gpio_setpull() provide the means for a
+driver or machine to change gpio configuration.
+
+See arch/arm/mach-s3c/gpio-cfg.h for more information on these functions.
diff --git a/Documentation/arm/samsung/index.rst b/Documentation/arm/samsung/index.rst
new file mode 100644
index 000000000..8142cce3d
--- /dev/null
+++ b/Documentation/arm/samsung/index.rst
@@ -0,0 +1,12 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===========
+Samsung SoC
+===========
+
+.. toctree::
+   :maxdepth: 1
+
+   gpio
+   bootloader-interface
+   overview
diff --git a/Documentation/arm/samsung/overview.rst b/Documentation/arm/samsung/overview.rst
new file mode 100644
index 000000000..e74307897
--- /dev/null
+++ b/Documentation/arm/samsung/overview.rst
@@ -0,0 +1,89 @@
+==========================
+Samsung ARM Linux Overview
+==========================
+
+Introduction
+------------
+
+  The Samsung range of ARM SoCs spans many similar devices, from the initial
+  ARM9 through to the newest ARM cores. This document shows an overview of
+  the current kernel support, how to use it and where to find the code
+  that supports this.
+
+  The currently supported SoCs are:
+
+  - S3C24XX: See Documentation/arm/samsung-s3c24xx/overview.rst for full list
+  - S3C64XX: S3C6400 and S3C6410
+  - S5PC110 / S5PV210
+
+
+S3C24XX Systems
+---------------
+
+  There is still documentation in Documnetation/arm/Samsung-S3C24XX/ which
+  deals with the architecture and drivers specific to these devices.
+
+  See Documentation/arm/samsung-s3c24xx/overview.rst for more information
+  on the implementation details and specific support.
+
+
+Configuration
+-------------
+
+  A number of configurations are supplied, as there is no current way of
+  unifying all the SoCs into one kernel.
+
+  s5pc110_defconfig
+	- S5PC110 specific default configuration
+  s5pv210_defconfig
+	- S5PV210 specific default configuration
+
+
+Layout
+------
+
+  The directory layout is currently being restructured, and consists of
+  several platform directories and then the machine specific directories
+  of the CPUs being built for.
+
+  plat-samsung provides the base for all the implementations, and is the
+  last in the line of include directories that are processed for the build
+  specific information. It contains the base clock, GPIO and device definitions
+  to get the system running.
+
+  plat-s3c24xx is for s3c24xx specific builds, see the S3C24XX docs.
+
+  plat-s5p is for s5p specific builds, and contains common support for the
+  S5P specific systems. Not all S5Ps use all the features in this directory
+  due to differences in the hardware.
+
+
+Layout changes
+--------------
+
+  The old plat-s3c and plat-s5pc1xx directories have been removed, with
+  support moved to either plat-samsung or plat-s5p as necessary. These moves
+  where to simplify the include and dependency issues involved with having
+  so many different platform directories.
+
+
+Port Contributors
+-----------------
+
+  Ben Dooks (BJD)
+  Vincent Sanders
+  Herbert Potzl
+  Arnaud Patard (RTP)
+  Roc Wu
+  Klaus Fetscher
+  Dimitry Andric
+  Shannon Holland
+  Guillaume Gourat (NexVision)
+  Christer Weinigel (wingel) (Acer N30)
+  Lucas Correia Villa Real (S3C2400 port)
+
+
+Document Author
+---------------
+
+Copyright 2009-2010 Ben Dooks <ben-linux@fluff.org>
diff --git a/Documentation/arm/setup.rst b/Documentation/arm/setup.rst
new file mode 100644
index 000000000..8e12ef3fb
--- /dev/null
+++ b/Documentation/arm/setup.rst
@@ -0,0 +1,108 @@
+=============================================
+Kernel initialisation parameters on ARM Linux
+=============================================
+
+The following document describes the kernel initialisation parameter
+structure, otherwise known as 'struct param_struct' which is used
+for most ARM Linux architectures.
+
+This structure is used to pass initialisation parameters from the
+kernel loader to the Linux kernel proper, and may be short lived
+through the kernel initialisation process.  As a general rule, it
+should not be referenced outside of arch/arm/kernel/setup.c:setup_arch().
+
+There are a lot of parameters listed in there, and they are described
+below:
+
+ page_size
+   This parameter must be set to the page size of the machine, and
+   will be checked by the kernel.
+
+ nr_pages
+   This is the total number of pages of memory in the system.  If
+   the memory is banked, then this should contain the total number
+   of pages in the system.
+
+   If the system contains separate VRAM, this value should not
+   include this information.
+
+ ramdisk_size
+   This is now obsolete, and should not be used.
+
+ flags
+   Various kernel flags, including:
+
+    =====   ========================
+    bit 0   1 = mount root read only
+    bit 1   unused
+    bit 2   0 = load ramdisk
+    bit 3   0 = prompt for ramdisk
+    =====   ========================
+
+ rootdev
+   major/minor number pair of device to mount as the root filesystem.
+
+ video_num_cols / video_num_rows
+   These two together describe the character size of the dummy console,
+   or VGA console character size.  They should not be used for any other
+   purpose.
+
+   It's generally a good idea to set these to be either standard VGA, or
+   the equivalent character size of your fbcon display.  This then allows
+   all the bootup messages to be displayed correctly.
+
+ video_x / video_y
+   This describes the character position of cursor on VGA console, and
+   is otherwise unused. (should not be used for other console types, and
+   should not be used for other purposes).
+
+ memc_control_reg
+   MEMC chip control register for Acorn Archimedes and Acorn A5000
+   based machines.  May be used differently by different architectures.
+
+ sounddefault
+   Default sound setting on Acorn machines.  May be used differently by
+   different architectures.
+
+ adfsdrives
+   Number of ADFS/MFM disks.  May be used differently by different
+   architectures.
+
+ bytes_per_char_h / bytes_per_char_v
+   These are now obsolete, and should not be used.
+
+ pages_in_bank[4]
+   Number of pages in each bank of the systems memory (used for RiscPC).
+   This is intended to be used on systems where the physical memory
+   is non-contiguous from the processors point of view.
+
+ pages_in_vram
+   Number of pages in VRAM (used on Acorn RiscPC).  This value may also
+   be used by loaders if the size of the video RAM can't be obtained
+   from the hardware.
+
+ initrd_start / initrd_size
+   This describes the kernel virtual start address and size of the
+   initial ramdisk.
+
+ rd_start
+   Start address in sectors of the ramdisk image on a floppy disk.
+
+ system_rev
+   system revision number.
+
+ system_serial_low / system_serial_high
+   system 64-bit serial number
+
+ mem_fclk_21285
+   The speed of the external oscillator to the 21285 (footbridge),
+   which control's the speed of the memory bus, timer & serial port.
+   Depending upon the speed of the cpu its value can be between
+   0-66 MHz. If no params are passed or a value of zero is passed,
+   then a value of 50 Mhz is the default on 21285 architectures.
+
+ paths[8][128]
+   These are now obsolete, and should not be used.
+
+ commandline
+   Kernel command line parameters.  Details can be found elsewhere.
diff --git a/Documentation/arm/spear/overview.rst b/Documentation/arm/spear/overview.rst
new file mode 100644
index 000000000..1a77f6b21
--- /dev/null
+++ b/Documentation/arm/spear/overview.rst
@@ -0,0 +1,66 @@
+========================
+SPEAr ARM Linux Overview
+========================
+
+Introduction
+------------
+
+  SPEAr (Structured Processor Enhanced Architecture).
+  weblink : http://www.st.com/spear
+
+  The ST Microelectronics SPEAr range of ARM9/CortexA9 System-on-Chip CPUs are
+  supported by the 'spear' platform of ARM Linux. Currently SPEAr1310,
+  SPEAr1340, SPEAr300, SPEAr310, SPEAr320 and SPEAr600 SOCs are supported.
+
+  Hierarchy in SPEAr is as follows:
+
+  SPEAr (Platform)
+
+	- SPEAr3XX (3XX SOC series, based on ARM9)
+		- SPEAr300 (SOC)
+			- SPEAr300 Evaluation Board
+		- SPEAr310 (SOC)
+			- SPEAr310 Evaluation Board
+		- SPEAr320 (SOC)
+			- SPEAr320 Evaluation Board
+	- SPEAr6XX (6XX SOC series, based on ARM9)
+		- SPEAr600 (SOC)
+			- SPEAr600 Evaluation Board
+	- SPEAr13XX (13XX SOC series, based on ARM CORTEXA9)
+		- SPEAr1310 (SOC)
+			- SPEAr1310 Evaluation Board
+		- SPEAr1340 (SOC)
+			- SPEAr1340 Evaluation Board
+
+Configuration
+-------------
+
+  A generic configuration is provided for each machine, and can be used as the
+  default by::
+
+	make spear13xx_defconfig
+	make spear3xx_defconfig
+	make spear6xx_defconfig
+
+Layout
+------
+
+  The common files for multiple machine families (SPEAr3xx, SPEAr6xx and
+  SPEAr13xx) are located in the platform code contained in arch/arm/plat-spear
+  with headers in plat/.
+
+  Each machine series have a directory with name arch/arm/mach-spear followed by
+  series name. Like mach-spear3xx, mach-spear6xx and mach-spear13xx.
+
+  Common file for machines of spear3xx family is mach-spear3xx/spear3xx.c, for
+  spear6xx is mach-spear6xx/spear6xx.c and for spear13xx family is
+  mach-spear13xx/spear13xx.c. mach-spear* also contain soc/machine specific
+  files, like spear1310.c, spear1340.c spear300.c, spear310.c, spear320.c and
+  spear600.c.  mach-spear* doesn't contains board specific files as they fully
+  support Flattened Device Tree.
+
+
+Document Author
+---------------
+
+  Viresh Kumar <vireshk@kernel.org>, (c) 2010-2012 ST Microelectronics
diff --git a/Documentation/arm/sti/overview.rst b/Documentation/arm/sti/overview.rst
new file mode 100644
index 000000000..70743617a
--- /dev/null
+++ b/Documentation/arm/sti/overview.rst
@@ -0,0 +1,36 @@
+======================
+STi ARM Linux Overview
+======================
+
+Introduction
+------------
+
+  The ST Microelectronics Multimedia and Application Processors range of
+  CortexA9 System-on-Chip are supported by the 'STi' platform of
+  ARM Linux. Currently STiH415, STiH416 SOCs are supported with both
+  B2000 and B2020 Reference boards.
+
+
+configuration
+-------------
+
+  A generic configuration is provided for both STiH415/416, and can be used as the
+  default by::
+
+	make stih41x_defconfig
+
+Layout
+------
+
+  All the files for multiple machine families (STiH415, STiH416, and STiG125)
+  are located in the platform code contained in arch/arm/mach-sti
+
+  There is a generic board board-dt.c in the mach folder which support
+  Flattened Device Tree, which means, It works with any compatible board with
+  Device Trees.
+
+
+Document Author
+---------------
+
+  Srinivas Kandagatla <srinivas.kandagatla@st.com>, (c) 2013 ST Microelectronics
diff --git a/Documentation/arm/sti/stih407-overview.rst b/Documentation/arm/sti/stih407-overview.rst
new file mode 100644
index 000000000..027e75bc7
--- /dev/null
+++ b/Documentation/arm/sti/stih407-overview.rst
@@ -0,0 +1,19 @@
+================
+STiH407 Overview
+================
+
+Introduction
+------------
+
+    The STiH407 is the new generation of SoC for Multi-HD, AVC set-top boxes
+    and server/connected client application for satellite, cable, terrestrial
+    and IP-STB markets.
+
+    Features
+    - ARM Cortex-A9 1.5 GHz dual core CPU (28nm)
+    - SATA2, USB 3.0, PCIe, Gbit Ethernet
+
+Document Author
+---------------
+
+  Maxime Coquelin <maxime.coquelin@st.com>, (c) 2014 ST Microelectronics
diff --git a/Documentation/arm/sti/stih415-overview.rst b/Documentation/arm/sti/stih415-overview.rst
new file mode 100644
index 000000000..b67452d61
--- /dev/null
+++ b/Documentation/arm/sti/stih415-overview.rst
@@ -0,0 +1,14 @@
+================
+STiH415 Overview
+================
+
+Introduction
+------------
+
+    The STiH415 is the next generation of HD, AVC set-top box processors
+    for satellite, cable, terrestrial and IP-STB markets.
+
+    Features:
+
+    - ARM Cortex-A9 1.0 GHz, dual-core CPU
+    - SATA2x2,USB 2.0x3, PCIe, Gbit Ethernet MACx2
diff --git a/Documentation/arm/sti/stih416-overview.rst b/Documentation/arm/sti/stih416-overview.rst
new file mode 100644
index 000000000..93f17d74d
--- /dev/null
+++ b/Documentation/arm/sti/stih416-overview.rst
@@ -0,0 +1,13 @@
+================
+STiH416 Overview
+================
+
+Introduction
+------------
+
+    The STiH416 is the next generation of HD, AVC set-top box processors
+    for satellite, cable, terrestrial and IP-STB markets.
+
+    Features
+    - ARM Cortex-A9 1.2 GHz dual core CPU
+    - SATA2x2,USB 2.0x3, PCIe, Gbit Ethernet MACx2
diff --git a/Documentation/arm/sti/stih418-overview.rst b/Documentation/arm/sti/stih418-overview.rst
new file mode 100644
index 000000000..b563c1f4f
--- /dev/null
+++ b/Documentation/arm/sti/stih418-overview.rst
@@ -0,0 +1,21 @@
+================
+STiH418 Overview
+================
+
+Introduction
+------------
+
+    The STiH418 is the new generation of SoC for UHDp60 set-top boxes
+    and server/connected client application for satellite, cable, terrestrial
+    and IP-STB markets.
+
+    Features
+    - ARM Cortex-A9 1.5 GHz quad core CPU (28nm)
+    - SATA2, USB 3.0, PCIe, Gbit Ethernet
+    - HEVC L5.1 Main 10
+    - VP9
+
+Document Author
+---------------
+
+  Maxime Coquelin <maxime.coquelin@st.com>, (c) 2015 ST Microelectronics
diff --git a/Documentation/arm/stm32/overview.rst b/Documentation/arm/stm32/overview.rst
new file mode 100644
index 000000000..85cfc8410
--- /dev/null
+++ b/Documentation/arm/stm32/overview.rst
@@ -0,0 +1,34 @@
+========================
+STM32 ARM Linux Overview
+========================
+
+Introduction
+------------
+
+The STMicroelectronics STM32 family of Cortex-A microprocessors (MPUs) and
+Cortex-M microcontrollers (MCUs) are supported by the 'STM32' platform of
+ARM Linux.
+
+Configuration
+-------------
+
+For MCUs, use the provided default configuration:
+        make stm32_defconfig
+For MPUs, use multi_v7 configuration:
+        make multi_v7_defconfig
+
+Layout
+------
+
+All the files for multiple machine families are located in the platform code
+contained in arch/arm/mach-stm32
+
+There is a generic board board-dt.c in the mach folder which support
+Flattened Device Tree, which means, it works with any compatible board with
+Device Trees.
+
+:Authors:
+
+- Maxime Coquelin <mcoquelin.stm32@gmail.com>
+- Ludovic Barre <ludovic.barre@st.com>
+- Gerald Baeza <gerald.baeza@st.com>
diff --git a/Documentation/arm/stm32/stm32-dma-mdma-chaining.rst b/Documentation/arm/stm32/stm32-dma-mdma-chaining.rst
new file mode 100644
index 000000000..2945e0e33
--- /dev/null
+++ b/Documentation/arm/stm32/stm32-dma-mdma-chaining.rst
@@ -0,0 +1,415 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=======================
+STM32 DMA-MDMA chaining
+=======================
+
+
+Introduction
+------------
+
+  This document describes the STM32 DMA-MDMA chaining feature. But before going
+  further, let's introduce the peripherals involved.
+
+  To offload data transfers from the CPU, STM32 microprocessors (MPUs) embed
+  direct memory access controllers (DMA).
+
+  STM32MP1 SoCs embed both STM32 DMA and STM32 MDMA controllers. STM32 DMA
+  request routing capabilities are enhanced by a DMA request multiplexer
+  (STM32 DMAMUX).
+
+  **STM32 DMAMUX**
+
+  STM32 DMAMUX routes any DMA request from a given peripheral to any STM32 DMA
+  controller (STM32MP1 counts two STM32 DMA controllers) channels.
+
+  **STM32 DMA**
+
+  STM32 DMA is mainly used to implement central data buffer storage (usually in
+  the system SRAM) for different peripheral. It can access external RAMs but
+  without the ability to generate convenient burst transfer ensuring the best
+  load of the AXI.
+
+  **STM32 MDMA**
+
+  STM32 MDMA (Master DMA) is mainly used to manage direct data transfers between
+  RAM data buffers without CPU intervention. It can also be used in a
+  hierarchical structure that uses STM32 DMA as first level data buffer
+  interfaces for AHB peripherals, while the STM32 MDMA acts as a second level
+  DMA with better performance. As a AXI/AHB master, STM32 MDMA can take control
+  of the AXI/AHB bus.
+
+
+Principles
+----------
+
+  STM32 DMA-MDMA chaining feature relies on the strengths of STM32 DMA and
+  STM32 MDMA controllers.
+
+  STM32 DMA has a circular Double Buffer Mode (DBM). At each end of transaction
+  (when DMA data counter - DMA_SxNDTR - reaches 0), the memory pointers
+  (configured with DMA_SxSM0AR and DMA_SxM1AR) are swapped and the DMA data
+  counter is automatically reloaded. This allows the SW or the STM32 MDMA to
+  process one memory area while the second memory area is being filled/used by
+  the STM32 DMA transfer.
+
+  With STM32 MDMA linked-list mode, a single request initiates the data array
+  (collection of nodes) to be transferred until the linked-list pointer for the
+  channel is null. The channel transfer complete of the last node is the end of
+  transfer, unless first and last nodes are linked to each other, in such a
+  case, the linked-list loops on to create a circular MDMA transfer.
+
+  STM32 MDMA has direct connections with STM32 DMA. This enables autonomous
+  communication and synchronization between peripherals, thus saving CPU
+  resources and bus congestion. Transfer Complete signal of STM32 DMA channel
+  can triggers STM32 MDMA transfer. STM32 MDMA can clear the request generated
+  by the STM32 DMA by writing to its Interrupt Clear register (whose address is
+  stored in MDMA_CxMAR, and bit mask in MDMA_CxMDR).
+
+  .. table:: STM32 MDMA interconnect table with STM32 DMA
+
+    +--------------+----------------+-----------+------------+
+    | STM32 DMAMUX | STM32 DMA      | STM32 DMA | STM32 MDMA |
+    | channels     | channels       | Transfer  | request    |
+    |              |                | complete  |            |
+    |              |                | signal    |            |
+    +==============+================+===========+============+
+    | Channel *0*  | DMA1 channel 0 | dma1_tcf0 | *0x00*     |
+    +--------------+----------------+-----------+------------+
+    | Channel *1*  | DMA1 channel 1 | dma1_tcf1 | *0x01*     |
+    +--------------+----------------+-----------+------------+
+    | Channel *2*  | DMA1 channel 2 | dma1_tcf2 | *0x02*     |
+    +--------------+----------------+-----------+------------+
+    | Channel *3*  | DMA1 channel 3 | dma1_tcf3 | *0x03*     |
+    +--------------+----------------+-----------+------------+
+    | Channel *4*  | DMA1 channel 4 | dma1_tcf4 | *0x04*     |
+    +--------------+----------------+-----------+------------+
+    | Channel *5*  | DMA1 channel 5 | dma1_tcf5 | *0x05*     |
+    +--------------+----------------+-----------+------------+
+    | Channel *6*  | DMA1 channel 6 | dma1_tcf6 | *0x06*     |
+    +--------------+----------------+-----------+------------+
+    | Channel *7*  | DMA1 channel 7 | dma1_tcf7 | *0x07*     |
+    +--------------+----------------+-----------+------------+
+    | Channel *8*  | DMA2 channel 0 | dma2_tcf0 | *0x08*     |
+    +--------------+----------------+-----------+------------+
+    | Channel *9*  | DMA2 channel 1 | dma2_tcf1 | *0x09*     |
+    +--------------+----------------+-----------+------------+
+    | Channel *10* | DMA2 channel 2 | dma2_tcf2 | *0x0A*     |
+    +--------------+----------------+-----------+------------+
+    | Channel *11* | DMA2 channel 3 | dma2_tcf3 | *0x0B*     |
+    +--------------+----------------+-----------+------------+
+    | Channel *12* | DMA2 channel 4 | dma2_tcf4 | *0x0C*     |
+    +--------------+----------------+-----------+------------+
+    | Channel *13* | DMA2 channel 5 | dma2_tcf5 | *0x0D*     |
+    +--------------+----------------+-----------+------------+
+    | Channel *14* | DMA2 channel 6 | dma2_tcf6 | *0x0E*     |
+    +--------------+----------------+-----------+------------+
+    | Channel *15* | DMA2 channel 7 | dma2_tcf7 | *0x0F*     |
+    +--------------+----------------+-----------+------------+
+
+  STM32 DMA-MDMA chaining feature then uses a SRAM buffer. STM32MP1 SoCs embed
+  three fast access static internal RAMs of various size, used for data storage.
+  Due to STM32 DMA legacy (within microcontrollers), STM32 DMA performances are
+  bad with DDR, while they are optimal with SRAM. Hence the SRAM buffer used
+  between STM32 DMA and STM32 MDMA. This buffer is split in two equal periods
+  and STM32 DMA uses one period while STM32 MDMA uses the other period
+  simultaneously.
+  ::
+
+                    dma[1:2]-tcf[0:7]
+                   .----------------.
+     ____________ '    _________     V____________
+    | STM32 DMA  |    /  __|>_  \    | STM32 MDMA |
+    |------------|   |  /     \  |   |------------|
+    | DMA_SxM0AR |<=>| | SRAM  | |<=>| []-[]...[] |
+    | DMA_SxM1AR |   |  \_____/  |   |            |
+    |____________|    \___<|____/    |____________|
+
+  STM32 DMA-MDMA chaining uses (struct dma_slave_config).peripheral_config to
+  exchange the parameters needed to configure MDMA. These parameters are
+  gathered into a u32 array with three values:
+
+  * the STM32 MDMA request (which is actually the DMAMUX channel ID),
+  * the address of the STM32 DMA register to clear the Transfer Complete
+    interrupt flag,
+  * the mask of the Transfer Complete interrupt flag of the STM32 DMA channel.
+
+Device Tree updates for STM32 DMA-MDMA chaining support
+-------------------------------------------------------
+
+  **1. Allocate a SRAM buffer**
+
+    SRAM device tree node is defined in SoC device tree. You can refer to it in
+    your board device tree to define your SRAM pool.
+    ::
+
+          &sram {
+                  my_foo_device_dma_pool: dma-sram@0 {
+                          reg = <0x0 0x1000>;
+                  };
+          };
+
+    Be careful of the start index, in case there are other SRAM consumers.
+    Define your pool size strategically: to optimise chaining, the idea is that
+    STM32 DMA and STM32 MDMA can work simultaneously, on each buffer of the
+    SRAM.
+    If the SRAM period is greater than the expected DMA transfer, then STM32 DMA
+    and STM32 MDMA will work sequentially instead of simultaneously. It is not a
+    functional issue but it is not optimal.
+
+    Don't forget to refer to your SRAM pool in your device node. You need to
+    define a new property.
+    ::
+
+          &my_foo_device {
+                  ...
+                  my_dma_pool = &my_foo_device_dma_pool;
+          };
+
+    Then get this SRAM pool in your foo driver and allocate your SRAM buffer.
+
+  **2. Allocate a STM32 DMA channel and a STM32 MDMA channel**
+
+    You need to define an extra channel in your device tree node, in addition to
+    the one you should already have for "classic" DMA operation.
+
+    This new channel must be taken from STM32 MDMA channels, so, the phandle of
+    the DMA controller to use is the MDMA controller's one.
+    ::
+
+          &my_foo_device {
+                  [...]
+                  my_dma_pool = &my_foo_device_dma_pool;
+                  dmas = <&dmamux1 ...>,                // STM32 DMA channel
+                         <&mdma1 0 0x3 0x1200000a 0 0>; // + STM32 MDMA channel
+          };
+
+    Concerning STM32 MDMA bindings:
+
+    1. The request line number : whatever the value here, it will be overwritten
+    by MDMA driver with the STM32 DMAMUX channel ID passed through
+    (struct dma_slave_config).peripheral_config
+
+    2. The priority level : choose Very High (0x3) so that your channel will
+    take priority other the other during request arbitration
+
+    3. A 32bit mask specifying the DMA channel configuration : source and
+    destination address increment, block transfer with 128 bytes per single
+    transfer
+
+    4. The 32bit value specifying the register to be used to acknowledge the
+    request: it will be overwritten by MDMA driver, with the DMA channel
+    interrupt flag clear register address passed through
+    (struct dma_slave_config).peripheral_config
+
+    5. The 32bit mask specifying the value to be written to acknowledge the
+    request: it will be overwritten by MDMA driver, with the DMA channel
+    Transfer Complete flag passed through
+    (struct dma_slave_config).peripheral_config
+
+Driver updates for STM32 DMA-MDMA chaining support in foo driver
+----------------------------------------------------------------
+
+  **0. (optional) Refactor the original sg_table if dmaengine_prep_slave_sg()**
+
+    In case of dmaengine_prep_slave_sg(), the original sg_table can't be used as
+    is. Two new sg_tables must be created from the original one. One for
+    STM32 DMA transfer (where memory address targets now the SRAM buffer instead
+    of DDR buffer) and one for STM32 MDMA transfer (where memory address targets
+    the DDR buffer).
+
+    The new sg_list items must fit SRAM period length. Here is an example for
+    DMA_DEV_TO_MEM:
+    ::
+
+      /*
+        * Assuming sgl and nents, respectively the initial scatterlist and its
+        * length.
+        * Assuming sram_dma_buf and sram_period, respectively the memory
+        * allocated from the pool for DMA usage, and the length of the period,
+        * which is half of the sram_buf size.
+        */
+      struct sg_table new_dma_sgt, new_mdma_sgt;
+      struct scatterlist *s, *_sgl;
+      dma_addr_t ddr_dma_buf;
+      u32 new_nents = 0, len;
+      int i;
+
+      /* Count the number of entries needed */
+      for_each_sg(sgl, s, nents, i)
+              if (sg_dma_len(s) > sram_period)
+                      new_nents += DIV_ROUND_UP(sg_dma_len(s), sram_period);
+              else
+                      new_nents++;
+
+      /* Create sg table for STM32 DMA channel */
+      ret = sg_alloc_table(&new_dma_sgt, new_nents, GFP_ATOMIC);
+      if (ret)
+              dev_err(dev, "DMA sg table alloc failed\n");
+
+      for_each_sg(new_dma_sgt.sgl, s, new_dma_sgt.nents, i) {
+              _sgl = sgl;
+              sg_dma_len(s) = min(sg_dma_len(_sgl), sram_period);
+              /* Targets the beginning = first half of the sram_buf */
+              s->dma_address = sram_buf;
+              /*
+                * Targets the second half of the sram_buf
+                * for odd indexes of the item of the sg_list
+                */
+              if (i & 1)
+                      s->dma_address += sram_period;
+      }
+
+      /* Create sg table for STM32 MDMA channel */
+      ret = sg_alloc_table(&new_mdma_sgt, new_nents, GFP_ATOMIC);
+      if (ret)
+              dev_err(dev, "MDMA sg_table alloc failed\n");
+
+      _sgl = sgl;
+      len = sg_dma_len(sgl);
+      ddr_dma_buf = sg_dma_address(sgl);
+      for_each_sg(mdma_sgt.sgl, s, mdma_sgt.nents, i) {
+              size_t bytes = min_t(size_t, len, sram_period);
+
+              sg_dma_len(s) = bytes;
+              sg_dma_address(s) = ddr_dma_buf;
+              len -= bytes;
+
+              if (!len && sg_next(_sgl)) {
+                      _sgl = sg_next(_sgl);
+                      len = sg_dma_len(_sgl);
+                      ddr_dma_buf = sg_dma_address(_sgl);
+              } else {
+                      ddr_dma_buf += bytes;
+              }
+      }
+
+    Don't forget to release these new sg_tables after getting the descriptors
+    with dmaengine_prep_slave_sg().
+
+  **1. Set controller specific parameters**
+
+    First, use dmaengine_slave_config() with a struct dma_slave_config to
+    configure STM32 DMA channel. You just have to take care of DMA addresses,
+    the memory address (depending on the transfer direction) must point on your
+    SRAM buffer, and set (struct dma_slave_config).peripheral_size != 0.
+
+    STM32 DMA driver will check (struct dma_slave_config).peripheral_size to
+    determine if chaining is being used or not. If it is used, then STM32 DMA
+    driver fills (struct dma_slave_config).peripheral_config with an array of
+    three u32 : the first one containing STM32 DMAMUX channel ID, the second one
+    the channel interrupt flag clear register address, and the third one the
+    channel Transfer Complete flag mask.
+
+    Then, use dmaengine_slave_config with another struct dma_slave_config to
+    configure STM32 MDMA channel. Take care of DMA addresses, the device address
+    (depending on the transfer direction) must point on your SRAM buffer, and
+    the memory address must point to the buffer originally used for "classic"
+    DMA operation. Use the previous (struct dma_slave_config).peripheral_size
+    and .peripheral_config that have been updated by STM32 DMA driver, to set
+    (struct dma_slave_config).peripheral_size and .peripheral_config of the
+    struct dma_slave_config to configure STM32 MDMA channel.
+    ::
+
+      struct dma_slave_config dma_conf;
+      struct dma_slave_config mdma_conf;
+
+      memset(&dma_conf, 0, sizeof(dma_conf));
+      [...]
+      config.direction = DMA_DEV_TO_MEM;
+      config.dst_addr = sram_dma_buf;        // SRAM buffer
+      config.peripheral_size = 1;            // peripheral_size != 0 => chaining
+
+      dmaengine_slave_config(dma_chan, &dma_config);
+
+      memset(&mdma_conf, 0, sizeof(mdma_conf));
+      config.direction = DMA_DEV_TO_MEM;
+      mdma_conf.src_addr = sram_dma_buf;     // SRAM buffer
+      mdma_conf.dst_addr = rx_dma_buf;       // original memory buffer
+      mdma_conf.peripheral_size = dma_conf.peripheral_size;       // <- dma_conf
+      mdma_conf.peripheral_config = dma_config.peripheral_config; // <- dma_conf
+
+      dmaengine_slave_config(mdma_chan, &mdma_conf);
+
+  **2. Get a descriptor for STM32 DMA channel transaction**
+
+    In the same way you get your descriptor for your "classic" DMA operation,
+    you just have to replace the original sg_list (in case of
+    dmaengine_prep_slave_sg()) with the new sg_list using SRAM buffer, or to
+    replace the original buffer address, length and period (in case of
+    dmaengine_prep_dma_cyclic()) with the new SRAM buffer.
+
+  **3. Get a descriptor for STM32 MDMA channel transaction**
+
+    If you previously get descriptor (for STM32 DMA) with
+
+    * dmaengine_prep_slave_sg(), then use dmaengine_prep_slave_sg() for
+      STM32 MDMA;
+    * dmaengine_prep_dma_cyclic(), then use dmaengine_prep_dma_cyclic() for
+      STM32 MDMA.
+
+    Use the new sg_list using SRAM buffer (in case of dmaengine_prep_slave_sg())
+    or, depending on the transfer direction, either the original DDR buffer (in
+    case of DMA_DEV_TO_MEM) or the SRAM buffer (in case of DMA_MEM_TO_DEV), the
+    source address being previously set with dmaengine_slave_config().
+
+  **4. Submit both transactions**
+
+    Before submitting your transactions, you may need to define on which
+    descriptor you want a callback to be called at the end of the transfer
+    (dmaengine_prep_slave_sg()) or the period (dmaengine_prep_dma_cyclic()).
+    Depending on the direction, set the callback on the descriptor that finishes
+    the overal transfer:
+
+    * DMA_DEV_TO_MEM: set the callback on the "MDMA" descriptor
+    * DMA_MEM_TO_DEV: set the callback on the "DMA" descriptor
+
+    Then, submit the descriptors whatever the order, with dmaengine_tx_submit().
+
+  **5. Issue pending requests (and wait for callback notification)**
+
+  As STM32 MDMA channel transfer is triggered by STM32 DMA, you must issue
+  STM32 MDMA channel before STM32 DMA channel.
+
+  If any, your callback will be called to warn you about the end of the overal
+  transfer or the period completion.
+
+  Don't forget to terminate both channels. STM32 DMA channel is configured in
+  cyclic Double-Buffer mode so it won't be disabled by HW, you need to terminate
+  it. STM32 MDMA channel will be stopped by HW in case of sg transfer, but not
+  in case of cyclic transfer. You can terminate it whatever the kind of transfer.
+
+  **STM32 DMA-MDMA chaining DMA_MEM_TO_DEV special case**
+
+  STM32 DMA-MDMA chaining in DMA_MEM_TO_DEV is a special case. Indeed, the
+  STM32 MDMA feeds the SRAM buffer with the DDR data, and the STM32 DMA reads
+  data from SRAM buffer. So some data (the first period) have to be copied in
+  SRAM buffer when the STM32 DMA starts to read.
+
+  A trick could be pausing the STM32 DMA channel (that will raise a Transfer
+  Complete signal, triggering the STM32 MDMA channel), but the first data read
+  by the STM32 DMA could be "wrong". The proper way is to prepare the first SRAM
+  period with dmaengine_prep_dma_memcpy(). Then this first period should be
+  "removed" from the sg or the cyclic transfer.
+
+  Due to this complexity, rather use the STM32 DMA-MDMA chaining for
+  DMA_DEV_TO_MEM and keep the "classic" DMA usage for DMA_MEM_TO_DEV, unless
+  you're not afraid.
+
+Resources
+---------
+
+  Application note, datasheet and reference manual are available on ST website
+  (STM32MP1_).
+
+  Dedicated focus on three application notes (AN5224_, AN4031_ & AN5001_)
+  dealing with STM32 DMAMUX, STM32 DMA and STM32 MDMA.
+
+.. _STM32MP1: https://www.st.com/en/microcontrollers-microprocessors/stm32mp1-series.html
+.. _AN5224: https://www.st.com/resource/en/application_note/an5224-stm32-dmamux-the-dma-request-router-stmicroelectronics.pdf
+.. _AN4031: https://www.st.com/resource/en/application_note/dm00046011-using-the-stm32f2-stm32f4-and-stm32f7-series-dma-controller-stmicroelectronics.pdf
+.. _AN5001: https://www.st.com/resource/en/application_note/an5001-stm32cube-expansion-package-for-stm32h7-series-mdma-stmicroelectronics.pdf
+
+:Authors:
+
+- Amelie Delaunay <amelie.delaunay@foss.st.com>
\ No newline at end of file
diff --git a/Documentation/arm/stm32/stm32f429-overview.rst b/Documentation/arm/stm32/stm32f429-overview.rst
new file mode 100644
index 000000000..a7ebe8ea6
--- /dev/null
+++ b/Documentation/arm/stm32/stm32f429-overview.rst
@@ -0,0 +1,25 @@
+==================
+STM32F429 Overview
+==================
+
+Introduction
+------------
+
+The STM32F429 is a Cortex-M4 MCU aimed at various applications.
+It features:
+
+- ARM Cortex-M4 up to 180MHz with FPU
+- 2MB internal Flash Memory
+- External memory support through FMC controller (PSRAM, SDRAM, NOR, NAND)
+- I2C, SPI, SAI, CAN, USB OTG, Ethernet controllers
+- LCD controller & Camera interface
+- Cryptographic processor
+
+Resources
+---------
+
+Datasheet and reference manual are publicly available on ST website (STM32F429_).
+
+.. _STM32F429: http://www.st.com/web/en/catalog/mmc/FM141/SC1169/SS1577/LN1806?ecmp=stm32f429-439_pron_pr-ces2014_nov2013
+
+:Authors: Maxime Coquelin <mcoquelin.stm32@gmail.com>
diff --git a/Documentation/arm/stm32/stm32f746-overview.rst b/Documentation/arm/stm32/stm32f746-overview.rst
new file mode 100644
index 000000000..78befddc7
--- /dev/null
+++ b/Documentation/arm/stm32/stm32f746-overview.rst
@@ -0,0 +1,32 @@
+==================
+STM32F746 Overview
+==================
+
+Introduction
+------------
+
+The STM32F746 is a Cortex-M7 MCU aimed at various applications.
+It features:
+
+- Cortex-M7 core running up to @216MHz
+- 1MB internal flash, 320KBytes internal RAM (+4KB of backup SRAM)
+- FMC controller to connect SDRAM, NOR and NAND memories
+- Dual mode QSPI
+- SD/MMC/SDIO support
+- Ethernet controller
+- USB OTFG FS & HS controllers
+- I2C, SPI, CAN busses support
+- Several 16 & 32 bits general purpose timers
+- Serial Audio interface
+- LCD controller
+- HDMI-CEC
+- SPDIFRX
+
+Resources
+---------
+
+Datasheet and reference manual are publicly available on ST website (STM32F746_).
+
+.. _STM32F746: http://www.st.com/content/st_com/en/products/microcontrollers/stm32-32-bit-arm-cortex-mcus/stm32f7-series/stm32f7x6/stm32f746ng.html
+
+:Authors: Alexandre Torgue <alexandre.torgue@st.com>
diff --git a/Documentation/arm/stm32/stm32f769-overview.rst b/Documentation/arm/stm32/stm32f769-overview.rst
new file mode 100644
index 000000000..e482980dd
--- /dev/null
+++ b/Documentation/arm/stm32/stm32f769-overview.rst
@@ -0,0 +1,34 @@
+==================
+STM32F769 Overview
+==================
+
+Introduction
+------------
+
+The STM32F769 is a Cortex-M7 MCU aimed at various applications.
+It features:
+
+- Cortex-M7 core running up to @216MHz
+- 2MB internal flash, 512KBytes internal RAM (+4KB of backup SRAM)
+- FMC controller to connect SDRAM, NOR and NAND memories
+- Dual mode QSPI
+- SD/MMC/SDIO support*2
+- Ethernet controller
+- USB OTFG FS & HS controllers
+- I2C*4, SPI*6, CAN*3 busses support
+- Several 16 & 32 bits general purpose timers
+- Serial Audio interface*2
+- LCD controller
+- HDMI-CEC
+- DSI
+- SPDIFRX
+- MDIO salave interface
+
+Resources
+---------
+
+Datasheet and reference manual are publicly available on ST website (STM32F769_).
+
+.. _STM32F769: http://www.st.com/content/st_com/en/products/microcontrollers/stm32-32-bit-arm-cortex-mcus/stm32-high-performance-mcus/stm32f7-series/stm32f7x9/stm32f769ni.html
+
+:Authors: Alexandre Torgue <alexandre.torgue@st.com>
diff --git a/Documentation/arm/stm32/stm32h743-overview.rst b/Documentation/arm/stm32/stm32h743-overview.rst
new file mode 100644
index 000000000..4e15f1a42
--- /dev/null
+++ b/Documentation/arm/stm32/stm32h743-overview.rst
@@ -0,0 +1,33 @@
+==================
+STM32H743 Overview
+==================
+
+Introduction
+------------
+
+The STM32H743 is a Cortex-M7 MCU aimed at various applications.
+It features:
+
+- Cortex-M7 core running up to @400MHz
+- 2MB internal flash, 1MBytes internal RAM
+- FMC controller to connect SDRAM, NOR and NAND memories
+- Dual mode QSPI
+- SD/MMC/SDIO support
+- Ethernet controller
+- USB OTFG FS & HS controllers
+- I2C, SPI, CAN busses support
+- Several 16 & 32 bits general purpose timers
+- Serial Audio interface
+- LCD controller
+- HDMI-CEC
+- SPDIFRX
+- DFSDM
+
+Resources
+---------
+
+Datasheet and reference manual are publicly available on ST website (STM32H743_).
+
+.. _STM32H743: http://www.st.com/en/microcontrollers/stm32h7x3.html?querycriteria=productId=LN2033
+
+:Authors: Alexandre Torgue <alexandre.torgue@st.com>
diff --git a/Documentation/arm/stm32/stm32h750-overview.rst b/Documentation/arm/stm32/stm32h750-overview.rst
new file mode 100644
index 000000000..0e51235c9
--- /dev/null
+++ b/Documentation/arm/stm32/stm32h750-overview.rst
@@ -0,0 +1,34 @@
+==================
+STM32H750 Overview
+==================
+
+Introduction
+------------
+
+The STM32H750 is a Cortex-M7 MCU aimed at various applications.
+It features:
+
+- Cortex-M7 core running up to @480MHz
+- 128K internal flash, 1MBytes internal RAM
+- FMC controller to connect SDRAM, NOR and NAND memories
+- Dual mode QSPI
+- SD/MMC/SDIO support
+- Ethernet controller
+- USB OTFG FS & HS controllers
+- I2C, SPI, CAN busses support
+- Several 16 & 32 bits general purpose timers
+- Serial Audio interface
+- LCD controller
+- HDMI-CEC
+- SPDIFRX
+- DFSDM
+
+Resources
+---------
+
+Datasheet and reference manual are publicly available on ST website (STM32H750_).
+
+.. _STM32H750: https://www.st.com/en/microcontrollers-microprocessors/stm32h750-value-line.html
+
+:Authors: Dillon Min <dillon.minfei@gmail.com>
+
diff --git a/Documentation/arm/stm32/stm32mp13-overview.rst b/Documentation/arm/stm32/stm32mp13-overview.rst
new file mode 100644
index 000000000..3bb9492da
--- /dev/null
+++ b/Documentation/arm/stm32/stm32mp13-overview.rst
@@ -0,0 +1,37 @@
+===================
+STM32MP13 Overview
+===================
+
+Introduction
+------------
+
+The STM32MP131/STM32MP133/STM32MP135 are Cortex-A MPU aimed at various applications.
+They feature:
+
+- One Cortex-A7 application core
+- Standard memories interface support
+- Standard connectivity, widely inherited from the STM32 MCU family
+- Comprehensive security support
+
+More details:
+
+- Cortex-A7 core running up to @900MHz
+- FMC controller to connect SDRAM, NOR and NAND memories
+- QSPI
+- SD/MMC/SDIO support
+- 2*Ethernet controller
+- CAN
+- ADC/DAC
+- USB EHCI/OHCI controllers
+- USB OTG
+- I2C, SPI, CAN busses support
+- Several general purpose timers
+- Serial Audio interface
+- LCD controller
+- DCMIPP
+- SPDIFRX
+- DFSDM
+
+:Authors:
+
+- Alexandre Torgue <alexandre.torgue@foss.st.com>
diff --git a/Documentation/arm/stm32/stm32mp157-overview.rst b/Documentation/arm/stm32/stm32mp157-overview.rst
new file mode 100644
index 000000000..f62fdc8e7
--- /dev/null
+++ b/Documentation/arm/stm32/stm32mp157-overview.rst
@@ -0,0 +1,20 @@
+===================
+STM32MP157 Overview
+===================
+
+Introduction
+------------
+
+The STM32MP157 is a Cortex-A MPU aimed at various applications.
+It features:
+
+- Dual core Cortex-A7 application core
+- 2D/3D image composition with GPU
+- Standard memories interface support
+- Standard connectivity, widely inherited from the STM32 MCU family
+- Comprehensive security support
+
+:Authors:
+
+- Ludovic Barre <ludovic.barre@st.com>
+- Gerald Baeza <gerald.baeza@st.com>
diff --git a/Documentation/arm/sunxi.rst b/Documentation/arm/sunxi.rst
new file mode 100644
index 000000000..b85d1e2f2
--- /dev/null
+++ b/Documentation/arm/sunxi.rst
@@ -0,0 +1,170 @@
+==================
+ARM Allwinner SoCs
+==================
+
+This document lists all the ARM Allwinner SoCs that are currently
+supported in mainline by the Linux kernel. This document will also
+provide links to documentation and/or datasheet for these SoCs.
+
+SunXi family
+------------
+  Linux kernel mach directory: arch/arm/mach-sunxi
+
+  Flavors:
+
+    * ARM926 based SoCs
+      - Allwinner F20 (sun3i)
+
+        * Not Supported
+
+    * ARM Cortex-A8 based SoCs
+      - Allwinner A10 (sun4i)
+
+        * Datasheet
+
+	  http://dl.linux-sunxi.org/A10/A10%20Datasheet%20-%20v1.21%20%282012-04-06%29.pdf
+	* User Manual
+
+	  http://dl.linux-sunxi.org/A10/A10%20User%20Manual%20-%20v1.20%20%282012-04-09%2c%20DECRYPTED%29.pdf
+
+      - Allwinner A10s (sun5i)
+
+        * Datasheet
+
+          http://dl.linux-sunxi.org/A10s/A10s%20Datasheet%20-%20v1.20%20%282012-03-27%29.pdf
+
+      - Allwinner A13 / R8 (sun5i)
+
+        * Datasheet
+
+	  http://dl.linux-sunxi.org/A13/A13%20Datasheet%20-%20v1.12%20%282012-03-29%29.pdf
+        * User Manual
+
+          http://dl.linux-sunxi.org/A13/A13%20User%20Manual%20-%20v1.2%20%282013-01-08%29.pdf
+
+      - Next Thing Co GR8 (sun5i)
+
+    * Single ARM Cortex-A7 based SoCs
+      - Allwinner V3s (sun8i)
+
+        * Datasheet
+
+          http://linux-sunxi.org/File:Allwinner_V3s_Datasheet_V1.0.pdf
+
+    * Dual ARM Cortex-A7 based SoCs
+      - Allwinner A20 (sun7i)
+
+        * User Manual
+
+          http://dl.linux-sunxi.org/A20/A20%20User%20Manual%202013-03-22.pdf
+
+      - Allwinner A23 (sun8i)
+
+        * Datasheet
+
+          http://dl.linux-sunxi.org/A23/A23%20Datasheet%20V1.0%2020130830.pdf
+
+        * User Manual
+
+          http://dl.linux-sunxi.org/A23/A23%20User%20Manual%20V1.0%2020130830.pdf
+
+    * Quad ARM Cortex-A7 based SoCs
+      - Allwinner A31 (sun6i)
+
+        * Datasheet
+
+          http://dl.linux-sunxi.org/A31/A3x_release_document/A31/IC/A31%20datasheet%20V1.3%2020131106.pdf
+
+        * User Manual
+
+          http://dl.linux-sunxi.org/A31/A3x_release_document/A31/IC/A31%20user%20manual%20V1.1%2020130630.pdf
+
+      - Allwinner A31s (sun6i)
+
+        * Datasheet
+
+          http://dl.linux-sunxi.org/A31/A3x_release_document/A31s/IC/A31s%20datasheet%20V1.3%2020131106.pdf
+
+        * User Manual
+
+          http://dl.linux-sunxi.org/A31/A3x_release_document/A31s/IC/A31s%20User%20Manual%20%20V1.0%2020130322.pdf
+
+      - Allwinner A33 (sun8i)
+
+        * Datasheet
+
+          http://dl.linux-sunxi.org/A33/A33%20Datasheet%20release%201.1.pdf
+
+        * User Manual
+
+          http://dl.linux-sunxi.org/A33/A33%20user%20manual%20release%201.1.pdf
+
+      - Allwinner H2+ (sun8i)
+
+        * No document available now, but is known to be working properly with
+          H3 drivers and memory map.
+
+      - Allwinner H3 (sun8i)
+
+        * Datasheet
+
+          https://linux-sunxi.org/images/4/4b/Allwinner_H3_Datasheet_V1.2.pdf
+
+      - Allwinner R40 (sun8i)
+
+        * Datasheet
+
+          https://github.com/tinalinux/docs/raw/r40-v1.y/R40_Datasheet_V1.0.pdf
+
+        * User Manual
+
+          https://github.com/tinalinux/docs/raw/r40-v1.y/Allwinner_R40_User_Manual_V1.0.pdf
+
+    * Quad ARM Cortex-A15, Quad ARM Cortex-A7 based SoCs
+      - Allwinner A80
+
+        * Datasheet
+
+	  http://dl.linux-sunxi.org/A80/A80_Datasheet_Revision_1.0_0404.pdf
+
+    * Octa ARM Cortex-A7 based SoCs
+      - Allwinner A83T
+
+        * Datasheet
+
+          https://github.com/allwinner-zh/documents/raw/master/A83T/A83T_Datasheet_v1.3_20150510.pdf
+
+        * User Manual
+
+          https://github.com/allwinner-zh/documents/raw/master/A83T/A83T_User_Manual_v1.5.1_20150513.pdf
+
+    * Quad ARM Cortex-A53 based SoCs
+      - Allwinner A64
+
+        * Datasheet
+
+          http://dl.linux-sunxi.org/A64/A64_Datasheet_V1.1.pdf
+
+        * User Manual
+
+          http://dl.linux-sunxi.org/A64/Allwinner%20A64%20User%20Manual%20v1.0.pdf
+
+      - Allwinner H6
+
+	* Datasheet
+
+	  https://linux-sunxi.org/images/5/5c/Allwinner_H6_V200_Datasheet_V1.1.pdf
+
+	* User Manual
+
+	  https://linux-sunxi.org/images/4/46/Allwinner_H6_V200_User_Manual_V1.1.pdf
+
+      - Allwinner H616
+
+	* Datasheet
+
+	  https://linux-sunxi.org/images/b/b9/H616_Datasheet_V1.0_cleaned.pdf
+
+	* User Manual
+
+	  https://linux-sunxi.org/images/2/24/H616_User_Manual_V1.0_cleaned.pdf
diff --git a/Documentation/arm/sunxi/clocks.rst b/Documentation/arm/sunxi/clocks.rst
new file mode 100644
index 000000000..23bd03f3e
--- /dev/null
+++ b/Documentation/arm/sunxi/clocks.rst
@@ -0,0 +1,57 @@
+=======================================================
+Frequently asked questions about the sunxi clock system
+=======================================================
+
+This document contains useful bits of information that people tend to ask
+about the sunxi clock system, as well as accompanying ASCII art when adequate.
+
+Q: Why is the main 24MHz oscillator gatable? Wouldn't that break the
+   system?
+
+A: The 24MHz oscillator allows gating to save power. Indeed, if gated
+   carelessly the system would stop functioning, but with the right
+   steps, one can gate it and keep the system running. Consider this
+   simplified suspend example:
+
+   While the system is operational, you would see something like::
+
+      24MHz         32kHz
+       |
+      PLL1
+       \
+        \_ CPU Mux
+             |
+           [CPU]
+
+   When you are about to suspend, you switch the CPU Mux to the 32kHz
+   oscillator::
+
+      24Mhz         32kHz
+       |              |
+      PLL1            |
+                     /
+           CPU Mux _/
+             |
+           [CPU]
+
+    Finally you can gate the main oscillator::
+
+                    32kHz
+                      |
+                      |
+                     /
+           CPU Mux _/
+             |
+           [CPU]
+
+Q: Were can I learn more about the sunxi clocks?
+
+A: The linux-sunxi wiki contains a page documenting the clock registers,
+   you can find it at
+
+        http://linux-sunxi.org/A10/CCM
+
+   The authoritative source for information at this time is the ccmu driver
+   released by Allwinner, you can find it at
+
+        https://github.com/linux-sunxi/linux-sunxi/tree/sunxi-3.0/arch/arm/mach-sun4i/clock/ccmu
diff --git a/Documentation/arm/swp_emulation.rst b/Documentation/arm/swp_emulation.rst
new file mode 100644
index 000000000..6a608a9c3
--- /dev/null
+++ b/Documentation/arm/swp_emulation.rst
@@ -0,0 +1,27 @@
+Software emulation of deprecated SWP instruction (CONFIG_SWP_EMULATE)
+---------------------------------------------------------------------
+
+ARMv6 architecture deprecates use of the SWP/SWPB instructions, and recommeds
+moving to the load-locked/store-conditional instructions LDREX and STREX.
+
+ARMv7 multiprocessing extensions introduce the ability to disable these
+instructions, triggering an undefined instruction exception when executed.
+Trapped instructions are emulated using an LDREX/STREX or LDREXB/STREXB
+sequence. If a memory access fault (an abort) occurs, a segmentation fault is
+signalled to the triggering process.
+
+/proc/cpu/swp_emulation holds some statistics/information, including the PID of
+the last process to trigger the emulation to be invocated. For example::
+
+  Emulated SWP:		12
+  Emulated SWPB:		0
+  Aborted SWP{B}:		1
+  Last process:		314
+
+
+NOTE:
+  when accessing uncached shared regions, LDREX/STREX rely on an external
+  transaction monitoring block called a global monitor to maintain update
+  atomicity. If your system does not implement a global monitor, this option can
+  cause programs that perform SWP operations to uncached memory to deadlock, as
+  the STREX operation will always fail.
diff --git a/Documentation/arm/tcm.rst b/Documentation/arm/tcm.rst
new file mode 100644
index 000000000..1dc6c3922
--- /dev/null
+++ b/Documentation/arm/tcm.rst
@@ -0,0 +1,161 @@
+==================================================
+ARM TCM (Tightly-Coupled Memory) handling in Linux
+==================================================
+
+Written by Linus Walleij <linus.walleij@stericsson.com>
+
+Some ARM SoCs have a so-called TCM (Tightly-Coupled Memory).
+This is usually just a few (4-64) KiB of RAM inside the ARM
+processor.
+
+Due to being embedded inside the CPU, the TCM has a
+Harvard-architecture, so there is an ITCM (instruction TCM)
+and a DTCM (data TCM). The DTCM can not contain any
+instructions, but the ITCM can actually contain data.
+The size of DTCM or ITCM is minimum 4KiB so the typical
+minimum configuration is 4KiB ITCM and 4KiB DTCM.
+
+ARM CPUs have special registers to read out status, physical
+location and size of TCM memories. arch/arm/include/asm/cputype.h
+defines a CPUID_TCM register that you can read out from the
+system control coprocessor. Documentation from ARM can be found
+at http://infocenter.arm.com, search for "TCM Status Register"
+to see documents for all CPUs. Reading this register you can
+determine if ITCM (bits 1-0) and/or DTCM (bit 17-16) is present
+in the machine.
+
+There is further a TCM region register (search for "TCM Region
+Registers" at the ARM site) that can report and modify the location
+size of TCM memories at runtime. This is used to read out and modify
+TCM location and size. Notice that this is not a MMU table: you
+actually move the physical location of the TCM around. At the
+place you put it, it will mask any underlying RAM from the
+CPU so it is usually wise not to overlap any physical RAM with
+the TCM.
+
+The TCM memory can then be remapped to another address again using
+the MMU, but notice that the TCM is often used in situations where
+the MMU is turned off. To avoid confusion the current Linux
+implementation will map the TCM 1 to 1 from physical to virtual
+memory in the location specified by the kernel. Currently Linux
+will map ITCM to 0xfffe0000 and on, and DTCM to 0xfffe8000 and
+on, supporting a maximum of 32KiB of ITCM and 32KiB of DTCM.
+
+Newer versions of the region registers also support dividing these
+TCMs in two separate banks, so for example an 8KiB ITCM is divided
+into two 4KiB banks with its own control registers. The idea is to
+be able to lock and hide one of the banks for use by the secure
+world (TrustZone).
+
+TCM is used for a few things:
+
+- FIQ and other interrupt handlers that need deterministic
+  timing and cannot wait for cache misses.
+
+- Idle loops where all external RAM is set to self-refresh
+  retention mode, so only on-chip RAM is accessible by
+  the CPU and then we hang inside ITCM waiting for an
+  interrupt.
+
+- Other operations which implies shutting off or reconfiguring
+  the external RAM controller.
+
+There is an interface for using TCM on the ARM architecture
+in <asm/tcm.h>. Using this interface it is possible to:
+
+- Define the physical address and size of ITCM and DTCM.
+
+- Tag functions to be compiled into ITCM.
+
+- Tag data and constants to be allocated to DTCM and ITCM.
+
+- Have the remaining TCM RAM added to a special
+  allocation pool with gen_pool_create() and gen_pool_add()
+  and provice tcm_alloc() and tcm_free() for this
+  memory. Such a heap is great for things like saving
+  device state when shutting off device power domains.
+
+A machine that has TCM memory shall select HAVE_TCM from
+arch/arm/Kconfig for itself. Code that needs to use TCM shall
+#include <asm/tcm.h>
+
+Functions to go into itcm can be tagged like this:
+int __tcmfunc foo(int bar);
+
+Since these are marked to become long_calls and you may want
+to have functions called locally inside the TCM without
+wasting space, there is also the __tcmlocalfunc prefix that
+will make the call relative.
+
+Variables to go into dtcm can be tagged like this::
+
+  int __tcmdata foo;
+
+Constants can be tagged like this::
+
+  int __tcmconst foo;
+
+To put assembler into TCM just use::
+
+  .section ".tcm.text" or .section ".tcm.data"
+
+respectively.
+
+Example code::
+
+  #include <asm/tcm.h>
+
+  /* Uninitialized data */
+  static u32 __tcmdata tcmvar;
+  /* Initialized data */
+  static u32 __tcmdata tcmassigned = 0x2BADBABEU;
+  /* Constant */
+  static const u32 __tcmconst tcmconst = 0xCAFEBABEU;
+
+  static void __tcmlocalfunc tcm_to_tcm(void)
+  {
+	int i;
+	for (i = 0; i < 100; i++)
+		tcmvar ++;
+  }
+
+  static void __tcmfunc hello_tcm(void)
+  {
+	/* Some abstract code that runs in ITCM */
+	int i;
+	for (i = 0; i < 100; i++) {
+		tcmvar ++;
+	}
+	tcm_to_tcm();
+  }
+
+  static void __init test_tcm(void)
+  {
+	u32 *tcmem;
+	int i;
+
+	hello_tcm();
+	printk("Hello TCM executed from ITCM RAM\n");
+
+	printk("TCM variable from testrun: %u @ %p\n", tcmvar, &tcmvar);
+	tcmvar = 0xDEADBEEFU;
+	printk("TCM variable: 0x%x @ %p\n", tcmvar, &tcmvar);
+
+	printk("TCM assigned variable: 0x%x @ %p\n", tcmassigned, &tcmassigned);
+
+	printk("TCM constant: 0x%x @ %p\n", tcmconst, &tcmconst);
+
+	/* Allocate some TCM memory from the pool */
+	tcmem = tcm_alloc(20);
+	if (tcmem) {
+		printk("TCM Allocated 20 bytes of TCM @ %p\n", tcmem);
+		tcmem[0] = 0xDEADBEEFU;
+		tcmem[1] = 0x2BADBABEU;
+		tcmem[2] = 0xCAFEBABEU;
+		tcmem[3] = 0xDEADBEEFU;
+		tcmem[4] = 0x2BADBABEU;
+		for (i = 0; i < 5; i++)
+			printk("TCM tcmem[%d] = %08x\n", i, tcmem[i]);
+		tcm_free(tcmem, 20);
+	}
+  }
diff --git a/Documentation/arm/uefi.rst b/Documentation/arm/uefi.rst
new file mode 100644
index 000000000..baebe688a
--- /dev/null
+++ b/Documentation/arm/uefi.rst
@@ -0,0 +1,70 @@
+================================================
+The Unified Extensible Firmware Interface (UEFI)
+================================================
+
+UEFI, the Unified Extensible Firmware Interface, is a specification
+governing the behaviours of compatible firmware interfaces. It is
+maintained by the UEFI Forum - http://www.uefi.org/.
+
+UEFI is an evolution of its predecessor 'EFI', so the terms EFI and
+UEFI are used somewhat interchangeably in this document and associated
+source code. As a rule, anything new uses 'UEFI', whereas 'EFI' refers
+to legacy code or specifications.
+
+UEFI support in Linux
+=====================
+Booting on a platform with firmware compliant with the UEFI specification
+makes it possible for the kernel to support additional features:
+
+- UEFI Runtime Services
+- Retrieving various configuration information through the standardised
+  interface of UEFI configuration tables. (ACPI, SMBIOS, ...)
+
+For actually enabling [U]EFI support, enable:
+
+- CONFIG_EFI=y
+- CONFIG_EFIVAR_FS=y or m
+
+The implementation depends on receiving information about the UEFI environment
+in a Flattened Device Tree (FDT) - so is only available with CONFIG_OF.
+
+UEFI stub
+=========
+The "stub" is a feature that extends the Image/zImage into a valid UEFI
+PE/COFF executable, including a loader application that makes it possible to
+load the kernel directly from the UEFI shell, boot menu, or one of the
+lightweight bootloaders like Gummiboot or rEFInd.
+
+The kernel image built with stub support remains a valid kernel image for
+booting in non-UEFI environments.
+
+UEFI kernel support on ARM
+==========================
+UEFI kernel support on the ARM architectures (arm and arm64) is only available
+when boot is performed through the stub.
+
+When booting in UEFI mode, the stub deletes any memory nodes from a provided DT.
+Instead, the kernel reads the UEFI memory map.
+
+The stub populates the FDT /chosen node with (and the kernel scans for) the
+following parameters:
+
+==========================  ======   ===========================================
+Name                        Size     Description
+==========================  ======   ===========================================
+linux,uefi-system-table     64-bit   Physical address of the UEFI System Table.
+
+linux,uefi-mmap-start       64-bit   Physical address of the UEFI memory map,
+                                     populated by the UEFI GetMemoryMap() call.
+
+linux,uefi-mmap-size        32-bit   Size in bytes of the UEFI memory map
+                                     pointed to in previous entry.
+
+linux,uefi-mmap-desc-size   32-bit   Size in bytes of each entry in the UEFI
+                                     memory map.
+
+linux,uefi-mmap-desc-ver    32-bit   Version of the mmap descriptor format.
+
+kaslr-seed                  64-bit   Entropy used to randomize the kernel image
+                                     base address location.
+==========================  ======   ===========================================
diff --git a/Documentation/arm/vfp/release-notes.rst b/Documentation/arm/vfp/release-notes.rst
new file mode 100644
index 000000000..c6b04937c
--- /dev/null
+++ b/Documentation/arm/vfp/release-notes.rst
@@ -0,0 +1,57 @@
+===============================================
+Release notes for Linux Kernel VFP support code
+===============================================
+
+Date: 	20 May 2004
+
+Author:	Russell King
+
+This is the first release of the Linux Kernel VFP support code.  It
+provides support for the exceptions bounced from VFP hardware found
+on ARM926EJ-S.
+
+This release has been validated against the SoftFloat-2b library by
+John R. Hauser using the TestFloat-2a test suite.  Details of this
+library and test suite can be found at:
+
+   http://www.jhauser.us/arithmetic/SoftFloat.html
+
+The operations which have been tested with this package are:
+
+ - fdiv
+ - fsub
+ - fadd
+ - fmul
+ - fcmp
+ - fcmpe
+ - fcvtd
+ - fcvts
+ - fsito
+ - ftosi
+ - fsqrt
+
+All the above pass softfloat tests with the following exceptions:
+
+- fadd/fsub shows some differences in the handling of +0 / -0 results
+  when input operands differ in signs.
+- the handling of underflow exceptions is slightly different.  If a
+  result underflows before rounding, but becomes a normalised number
+  after rounding, we do not signal an underflow exception.
+
+Other operations which have been tested by basic assembly-only tests
+are:
+
+ - fcpy
+ - fabs
+ - fneg
+ - ftoui
+ - ftosiz
+ - ftouiz
+
+The combination operations have not been tested:
+
+ - fmac
+ - fnmac
+ - fmsc
+ - fnmsc
+ - fnmul
diff --git a/Documentation/arm/vlocks.rst b/Documentation/arm/vlocks.rst
new file mode 100644
index 000000000..a40a17421
--- /dev/null
+++ b/Documentation/arm/vlocks.rst
@@ -0,0 +1,212 @@
+======================================
+vlocks for Bare-Metal Mutual Exclusion
+======================================
+
+Voting Locks, or "vlocks" provide a simple low-level mutual exclusion
+mechanism, with reasonable but minimal requirements on the memory
+system.
+
+These are intended to be used to coordinate critical activity among CPUs
+which are otherwise non-coherent, in situations where the hardware
+provides no other mechanism to support this and ordinary spinlocks
+cannot be used.
+
+
+vlocks make use of the atomicity provided by the memory system for
+writes to a single memory location.  To arbitrate, every CPU "votes for
+itself", by storing a unique number to a common memory location.  The
+final value seen in that memory location when all the votes have been
+cast identifies the winner.
+
+In order to make sure that the election produces an unambiguous result
+in finite time, a CPU will only enter the election in the first place if
+no winner has been chosen and the election does not appear to have
+started yet.
+
+
+Algorithm
+---------
+
+The easiest way to explain the vlocks algorithm is with some pseudo-code::
+
+
+	int currently_voting[NR_CPUS] = { 0, };
+	int last_vote = -1; /* no votes yet */
+
+	bool vlock_trylock(int this_cpu)
+	{
+		/* signal our desire to vote */
+		currently_voting[this_cpu] = 1;
+		if (last_vote != -1) {
+			/* someone already volunteered himself */
+			currently_voting[this_cpu] = 0;
+			return false; /* not ourself */
+		}
+
+		/* let's suggest ourself */
+		last_vote = this_cpu;
+		currently_voting[this_cpu] = 0;
+
+		/* then wait until everyone else is done voting */
+		for_each_cpu(i) {
+			while (currently_voting[i] != 0)
+				/* wait */;
+		}
+
+		/* result */
+		if (last_vote == this_cpu)
+			return true; /* we won */
+		return false;
+	}
+
+	bool vlock_unlock(void)
+	{
+		last_vote = -1;
+	}
+
+
+The currently_voting[] array provides a way for the CPUs to determine
+whether an election is in progress, and plays a role analogous to the
+"entering" array in Lamport's bakery algorithm [1].
+
+However, once the election has started, the underlying memory system
+atomicity is used to pick the winner.  This avoids the need for a static
+priority rule to act as a tie-breaker, or any counters which could
+overflow.
+
+As long as the last_vote variable is globally visible to all CPUs, it
+will contain only one value that won't change once every CPU has cleared
+its currently_voting flag.
+
+
+Features and limitations
+------------------------
+
+ * vlocks are not intended to be fair.  In the contended case, it is the
+   _last_ CPU which attempts to get the lock which will be most likely
+   to win.
+
+   vlocks are therefore best suited to situations where it is necessary
+   to pick a unique winner, but it does not matter which CPU actually
+   wins.
+
+ * Like other similar mechanisms, vlocks will not scale well to a large
+   number of CPUs.
+
+   vlocks can be cascaded in a voting hierarchy to permit better scaling
+   if necessary, as in the following hypothetical example for 4096 CPUs::
+
+	/* first level: local election */
+	my_town = towns[(this_cpu >> 4) & 0xf];
+	I_won = vlock_trylock(my_town, this_cpu & 0xf);
+	if (I_won) {
+		/* we won the town election, let's go for the state */
+		my_state = states[(this_cpu >> 8) & 0xf];
+		I_won = vlock_lock(my_state, this_cpu & 0xf));
+		if (I_won) {
+			/* and so on */
+			I_won = vlock_lock(the_whole_country, this_cpu & 0xf];
+			if (I_won) {
+				/* ... */
+			}
+			vlock_unlock(the_whole_country);
+		}
+		vlock_unlock(my_state);
+	}
+	vlock_unlock(my_town);
+
+
+ARM implementation
+------------------
+
+The current ARM implementation [2] contains some optimisations beyond
+the basic algorithm:
+
+ * By packing the members of the currently_voting array close together,
+   we can read the whole array in one transaction (providing the number
+   of CPUs potentially contending the lock is small enough).  This
+   reduces the number of round-trips required to external memory.
+
+   In the ARM implementation, this means that we can use a single load
+   and comparison::
+
+	LDR	Rt, [Rn]
+	CMP	Rt, #0
+
+   ...in place of code equivalent to::
+
+	LDRB	Rt, [Rn]
+	CMP	Rt, #0
+	LDRBEQ	Rt, [Rn, #1]
+	CMPEQ	Rt, #0
+	LDRBEQ	Rt, [Rn, #2]
+	CMPEQ	Rt, #0
+	LDRBEQ	Rt, [Rn, #3]
+	CMPEQ	Rt, #0
+
+   This cuts down on the fast-path latency, as well as potentially
+   reducing bus contention in contended cases.
+
+   The optimisation relies on the fact that the ARM memory system
+   guarantees coherency between overlapping memory accesses of
+   different sizes, similarly to many other architectures.  Note that
+   we do not care which element of currently_voting appears in which
+   bits of Rt, so there is no need to worry about endianness in this
+   optimisation.
+
+   If there are too many CPUs to read the currently_voting array in
+   one transaction then multiple transations are still required.  The
+   implementation uses a simple loop of word-sized loads for this
+   case.  The number of transactions is still fewer than would be
+   required if bytes were loaded individually.
+
+
+   In principle, we could aggregate further by using LDRD or LDM, but
+   to keep the code simple this was not attempted in the initial
+   implementation.
+
+
+ * vlocks are currently only used to coordinate between CPUs which are
+   unable to enable their caches yet.  This means that the
+   implementation removes many of the barriers which would be required
+   when executing the algorithm in cached memory.
+
+   packing of the currently_voting array does not work with cached
+   memory unless all CPUs contending the lock are cache-coherent, due
+   to cache writebacks from one CPU clobbering values written by other
+   CPUs.  (Though if all the CPUs are cache-coherent, you should be
+   probably be using proper spinlocks instead anyway).
+
+
+ * The "no votes yet" value used for the last_vote variable is 0 (not
+   -1 as in the pseudocode).  This allows statically-allocated vlocks
+   to be implicitly initialised to an unlocked state simply by putting
+   them in .bss.
+
+   An offset is added to each CPU's ID for the purpose of setting this
+   variable, so that no CPU uses the value 0 for its ID.
+
+
+Colophon
+--------
+
+Originally created and documented by Dave Martin for Linaro Limited, for
+use in ARM-based big.LITTLE platforms, with review and input gratefully
+received from Nicolas Pitre and Achin Gupta.  Thanks to Nicolas for
+grabbing most of this text out of the relevant mail thread and writing
+up the pseudocode.
+
+Copyright (C) 2012-2013  Linaro Limited
+Distributed under the terms of Version 2 of the GNU General Public
+License, as defined in linux/COPYING.
+
+
+References
+----------
+
+[1] Lamport, L. "A New Solution of Dijkstra's Concurrent Programming
+    Problem", Communications of the ACM 17, 8 (August 1974), 453-455.
+
+    https://en.wikipedia.org/wiki/Lamport%27s_bakery_algorithm
+
+[2] linux/arch/arm/common/vlock.S, www.kernel.org.