summaryrefslogtreecommitdiffstats
path: root/Documentation/core-api/dma-api.rst
diff options
context:
space:
mode:
authorDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-07 18:49:45 +0000
committerDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-07 18:49:45 +0000
commit2c3c1048746a4622d8c89a29670120dc8fab93c4 (patch)
tree848558de17fb3008cdf4d861b01ac7781903ce39 /Documentation/core-api/dma-api.rst
parentInitial commit. (diff)
downloadlinux-2c3c1048746a4622d8c89a29670120dc8fab93c4.tar.xz
linux-2c3c1048746a4622d8c89a29670120dc8fab93c4.zip
Adding upstream version 6.1.76.upstream/6.1.76upstream
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'Documentation/core-api/dma-api.rst')
-rw-r--r--Documentation/core-api/dma-api.rst846
1 files changed, 846 insertions, 0 deletions
diff --git a/Documentation/core-api/dma-api.rst b/Documentation/core-api/dma-api.rst
new file mode 100644
index 000000000..829f20a19
--- /dev/null
+++ b/Documentation/core-api/dma-api.rst
@@ -0,0 +1,846 @@
+============================================
+Dynamic DMA mapping using the generic device
+============================================
+
+:Author: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
+
+This document describes the DMA API. For a more gentle introduction
+of the API (and actual examples), see Documentation/core-api/dma-api-howto.rst.
+
+This API is split into two pieces. Part I describes the basic API.
+Part II describes extensions for supporting non-consistent memory
+machines. Unless you know that your driver absolutely has to support
+non-consistent platforms (this is usually only legacy platforms) you
+should only use the API described in part I.
+
+Part I - dma_API
+----------------
+
+To get the dma_API, you must #include <linux/dma-mapping.h>. This
+provides dma_addr_t and the interfaces described below.
+
+A dma_addr_t can hold any valid DMA address for the platform. It can be
+given to a device to use as a DMA source or target. A CPU cannot reference
+a dma_addr_t directly because there may be translation between its physical
+address space and the DMA address space.
+
+Part Ia - Using large DMA-coherent buffers
+------------------------------------------
+
+::
+
+ void *
+ dma_alloc_coherent(struct device *dev, size_t size,
+ dma_addr_t *dma_handle, gfp_t flag)
+
+Consistent memory is memory for which a write by either the device or
+the processor can immediately be read by the processor or device
+without having to worry about caching effects. (You may however need
+to make sure to flush the processor's write buffers before telling
+devices to read that memory.)
+
+This routine allocates a region of <size> bytes of consistent memory.
+
+It returns a pointer to the allocated region (in the processor's virtual
+address space) or NULL if the allocation failed.
+
+It also returns a <dma_handle> which may be cast to an unsigned integer the
+same width as the bus and given to the device as the DMA address base of
+the region.
+
+Note: consistent memory can be expensive on some platforms, and the
+minimum allocation length may be as big as a page, so you should
+consolidate your requests for consistent memory as much as possible.
+The simplest way to do that is to use the dma_pool calls (see below).
+
+The flag parameter (dma_alloc_coherent() only) allows the caller to
+specify the ``GFP_`` flags (see kmalloc()) for the allocation (the
+implementation may choose to ignore flags that affect the location of
+the returned memory, like GFP_DMA).
+
+::
+
+ void
+ dma_free_coherent(struct device *dev, size_t size, void *cpu_addr,
+ dma_addr_t dma_handle)
+
+Free a region of consistent memory you previously allocated. dev,
+size and dma_handle must all be the same as those passed into
+dma_alloc_coherent(). cpu_addr must be the virtual address returned by
+the dma_alloc_coherent().
+
+Note that unlike their sibling allocation calls, these routines
+may only be called with IRQs enabled.
+
+
+Part Ib - Using small DMA-coherent buffers
+------------------------------------------
+
+To get this part of the dma_API, you must #include <linux/dmapool.h>
+
+Many drivers need lots of small DMA-coherent memory regions for DMA
+descriptors or I/O buffers. Rather than allocating in units of a page
+or more using dma_alloc_coherent(), you can use DMA pools. These work
+much like a struct kmem_cache, except that they use the DMA-coherent allocator,
+not __get_free_pages(). Also, they understand common hardware constraints
+for alignment, like queue heads needing to be aligned on N-byte boundaries.
+
+
+::
+
+ struct dma_pool *
+ dma_pool_create(const char *name, struct device *dev,
+ size_t size, size_t align, size_t alloc);
+
+dma_pool_create() initializes a pool of DMA-coherent buffers
+for use with a given device. It must be called in a context which
+can sleep.
+
+The "name" is for diagnostics (like a struct kmem_cache name); dev and size
+are like what you'd pass to dma_alloc_coherent(). The device's hardware
+alignment requirement for this type of data is "align" (which is expressed
+in bytes, and must be a power of two). If your device has no boundary
+crossing restrictions, pass 0 for alloc; passing 4096 says memory allocated
+from this pool must not cross 4KByte boundaries.
+
+::
+
+ void *
+ dma_pool_zalloc(struct dma_pool *pool, gfp_t mem_flags,
+ dma_addr_t *handle)
+
+Wraps dma_pool_alloc() and also zeroes the returned memory if the
+allocation attempt succeeded.
+
+
+::
+
+ void *
+ dma_pool_alloc(struct dma_pool *pool, gfp_t gfp_flags,
+ dma_addr_t *dma_handle);
+
+This allocates memory from the pool; the returned memory will meet the
+size and alignment requirements specified at creation time. Pass
+GFP_ATOMIC to prevent blocking, or if it's permitted (not
+in_interrupt, not holding SMP locks), pass GFP_KERNEL to allow
+blocking. Like dma_alloc_coherent(), this returns two values: an
+address usable by the CPU, and the DMA address usable by the pool's
+device.
+
+::
+
+ void
+ dma_pool_free(struct dma_pool *pool, void *vaddr,
+ dma_addr_t addr);
+
+This puts memory back into the pool. The pool is what was passed to
+dma_pool_alloc(); the CPU (vaddr) and DMA addresses are what
+were returned when that routine allocated the memory being freed.
+
+::
+
+ void
+ dma_pool_destroy(struct dma_pool *pool);
+
+dma_pool_destroy() frees the resources of the pool. It must be
+called in a context which can sleep. Make sure you've freed all allocated
+memory back to the pool before you destroy it.
+
+
+Part Ic - DMA addressing limitations
+------------------------------------
+
+::
+
+ int
+ dma_set_mask_and_coherent(struct device *dev, u64 mask)
+
+Checks to see if the mask is possible and updates the device
+streaming and coherent DMA mask parameters if it is.
+
+Returns: 0 if successful and a negative error if not.
+
+::
+
+ int
+ dma_set_mask(struct device *dev, u64 mask)
+
+Checks to see if the mask is possible and updates the device
+parameters if it is.
+
+Returns: 0 if successful and a negative error if not.
+
+::
+
+ int
+ dma_set_coherent_mask(struct device *dev, u64 mask)
+
+Checks to see if the mask is possible and updates the device
+parameters if it is.
+
+Returns: 0 if successful and a negative error if not.
+
+::
+
+ u64
+ dma_get_required_mask(struct device *dev)
+
+This API returns the mask that the platform requires to
+operate efficiently. Usually this means the returned mask
+is the minimum required to cover all of memory. Examining the
+required mask gives drivers with variable descriptor sizes the
+opportunity to use smaller descriptors as necessary.
+
+Requesting the required mask does not alter the current mask. If you
+wish to take advantage of it, you should issue a dma_set_mask()
+call to set the mask to the value returned.
+
+::
+
+ size_t
+ dma_max_mapping_size(struct device *dev);
+
+Returns the maximum size of a mapping for the device. The size parameter
+of the mapping functions like dma_map_single(), dma_map_page() and
+others should not be larger than the returned value.
+
+::
+
+ size_t
+ dma_opt_mapping_size(struct device *dev);
+
+Returns the maximum optimal size of a mapping for the device.
+
+Mapping larger buffers may take much longer in certain scenarios. In
+addition, for high-rate short-lived streaming mappings, the upfront time
+spent on the mapping may account for an appreciable part of the total
+request lifetime. As such, if splitting larger requests incurs no
+significant performance penalty, then device drivers are advised to
+limit total DMA streaming mappings length to the returned value.
+
+::
+
+ bool
+ dma_need_sync(struct device *dev, dma_addr_t dma_addr);
+
+Returns %true if dma_sync_single_for_{device,cpu} calls are required to
+transfer memory ownership. Returns %false if those calls can be skipped.
+
+::
+
+ unsigned long
+ dma_get_merge_boundary(struct device *dev);
+
+Returns the DMA merge boundary. If the device cannot merge any the DMA address
+segments, the function returns 0.
+
+Part Id - Streaming DMA mappings
+--------------------------------
+
+::
+
+ dma_addr_t
+ dma_map_single(struct device *dev, void *cpu_addr, size_t size,
+ enum dma_data_direction direction)
+
+Maps a piece of processor virtual memory so it can be accessed by the
+device and returns the DMA address of the memory.
+
+The direction for both APIs may be converted freely by casting.
+However the dma_API uses a strongly typed enumerator for its
+direction:
+
+======================= =============================================
+DMA_NONE no direction (used for debugging)
+DMA_TO_DEVICE data is going from the memory to the device
+DMA_FROM_DEVICE data is coming from the device to the memory
+DMA_BIDIRECTIONAL direction isn't known
+======================= =============================================
+
+.. note::
+
+ Not all memory regions in a machine can be mapped by this API.
+ Further, contiguous kernel virtual space may not be contiguous as
+ physical memory. Since this API does not provide any scatter/gather
+ capability, it will fail if the user tries to map a non-physically
+ contiguous piece of memory. For this reason, memory to be mapped by
+ this API should be obtained from sources which guarantee it to be
+ physically contiguous (like kmalloc).
+
+ Further, the DMA address of the memory must be within the
+ dma_mask of the device (the dma_mask is a bit mask of the
+ addressable region for the device, i.e., if the DMA address of
+ the memory ANDed with the dma_mask is still equal to the DMA
+ address, then the device can perform DMA to the memory). To
+ ensure that the memory allocated by kmalloc is within the dma_mask,
+ the driver may specify various platform-dependent flags to restrict
+ the DMA address range of the allocation (e.g., on x86, GFP_DMA
+ guarantees to be within the first 16MB of available DMA addresses,
+ as required by ISA devices).
+
+ Note also that the above constraints on physical contiguity and
+ dma_mask may not apply if the platform has an IOMMU (a device which
+ maps an I/O DMA address to a physical memory address). However, to be
+ portable, device driver writers may *not* assume that such an IOMMU
+ exists.
+
+.. warning::
+
+ Memory coherency operates at a granularity called the cache
+ line width. In order for memory mapped by this API to operate
+ correctly, the mapped region must begin exactly on a cache line
+ boundary and end exactly on one (to prevent two separately mapped
+ regions from sharing a single cache line). Since the cache line size
+ may not be known at compile time, the API will not enforce this
+ requirement. Therefore, it is recommended that driver writers who
+ don't take special care to determine the cache line size at run time
+ only map virtual regions that begin and end on page boundaries (which
+ are guaranteed also to be cache line boundaries).
+
+ DMA_TO_DEVICE synchronisation must be done after the last modification
+ of the memory region by the software and before it is handed off to
+ the device. Once this primitive is used, memory covered by this
+ primitive should be treated as read-only by the device. If the device
+ may write to it at any point, it should be DMA_BIDIRECTIONAL (see
+ below).
+
+ DMA_FROM_DEVICE synchronisation must be done before the driver
+ accesses data that may be changed by the device. This memory should
+ be treated as read-only by the driver. If the driver needs to write
+ to it at any point, it should be DMA_BIDIRECTIONAL (see below).
+
+ DMA_BIDIRECTIONAL requires special handling: it means that the driver
+ isn't sure if the memory was modified before being handed off to the
+ device and also isn't sure if the device will also modify it. Thus,
+ you must always sync bidirectional memory twice: once before the
+ memory is handed off to the device (to make sure all memory changes
+ are flushed from the processor) and once before the data may be
+ accessed after being used by the device (to make sure any processor
+ cache lines are updated with data that the device may have changed).
+
+::
+
+ void
+ dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
+ enum dma_data_direction direction)
+
+Unmaps the region previously mapped. All the parameters passed in
+must be identical to those passed in (and returned) by the mapping
+API.
+
+::
+
+ dma_addr_t
+ dma_map_page(struct device *dev, struct page *page,
+ unsigned long offset, size_t size,
+ enum dma_data_direction direction)
+
+ void
+ dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size,
+ enum dma_data_direction direction)
+
+API for mapping and unmapping for pages. All the notes and warnings
+for the other mapping APIs apply here. Also, although the <offset>
+and <size> parameters are provided to do partial page mapping, it is
+recommended that you never use these unless you really know what the
+cache width is.
+
+::
+
+ dma_addr_t
+ dma_map_resource(struct device *dev, phys_addr_t phys_addr, size_t size,
+ enum dma_data_direction dir, unsigned long attrs)
+
+ void
+ dma_unmap_resource(struct device *dev, dma_addr_t addr, size_t size,
+ enum dma_data_direction dir, unsigned long attrs)
+
+API for mapping and unmapping for MMIO resources. All the notes and
+warnings for the other mapping APIs apply here. The API should only be
+used to map device MMIO resources, mapping of RAM is not permitted.
+
+::
+
+ int
+ dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
+
+In some circumstances dma_map_single(), dma_map_page() and dma_map_resource()
+will fail to create a mapping. A driver can check for these errors by testing
+the returned DMA address with dma_mapping_error(). A non-zero return value
+means the mapping could not be created and the driver should take appropriate
+action (e.g. reduce current DMA mapping usage or delay and try again later).
+
+::
+
+ int
+ dma_map_sg(struct device *dev, struct scatterlist *sg,
+ int nents, enum dma_data_direction direction)
+
+Returns: the number of DMA address segments mapped (this may be shorter
+than <nents> passed in if some elements of the scatter/gather list are
+physically or virtually adjacent and an IOMMU maps them with a single
+entry).
+
+Please note that the sg cannot be mapped again if it has been mapped once.
+The mapping process is allowed to destroy information in the sg.
+
+As with the other mapping interfaces, dma_map_sg() can fail. When it
+does, 0 is returned and a driver must take appropriate action. It is
+critical that the driver do something, in the case of a block driver
+aborting the request or even oopsing is better than doing nothing and
+corrupting the filesystem.
+
+With scatterlists, you use the resulting mapping like this::
+
+ int i, count = dma_map_sg(dev, sglist, nents, direction);
+ struct scatterlist *sg;
+
+ for_each_sg(sglist, sg, count, i) {
+ hw_address[i] = sg_dma_address(sg);
+ hw_len[i] = sg_dma_len(sg);
+ }
+
+where nents is the number of entries in the sglist.
+
+The implementation is free to merge several consecutive sglist entries
+into one (e.g. with an IOMMU, or if several pages just happen to be
+physically contiguous) and returns the actual number of sg entries it
+mapped them to. On failure 0, is returned.
+
+Then you should loop count times (note: this can be less than nents times)
+and use sg_dma_address() and sg_dma_len() macros where you previously
+accessed sg->address and sg->length as shown above.
+
+::
+
+ void
+ dma_unmap_sg(struct device *dev, struct scatterlist *sg,
+ int nents, enum dma_data_direction direction)
+
+Unmap the previously mapped scatter/gather list. All the parameters
+must be the same as those and passed in to the scatter/gather mapping
+API.
+
+Note: <nents> must be the number you passed in, *not* the number of
+DMA address entries returned.
+
+::
+
+ void
+ dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle,
+ size_t size,
+ enum dma_data_direction direction)
+
+ void
+ dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle,
+ size_t size,
+ enum dma_data_direction direction)
+
+ void
+ dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg,
+ int nents,
+ enum dma_data_direction direction)
+
+ void
+ dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg,
+ int nents,
+ enum dma_data_direction direction)
+
+Synchronise a single contiguous or scatter/gather mapping for the CPU
+and device. With the sync_sg API, all the parameters must be the same
+as those passed into the single mapping API. With the sync_single API,
+you can use dma_handle and size parameters that aren't identical to
+those passed into the single mapping API to do a partial sync.
+
+
+.. note::
+
+ You must do this:
+
+ - Before reading values that have been written by DMA from the device
+ (use the DMA_FROM_DEVICE direction)
+ - After writing values that will be written to the device using DMA
+ (use the DMA_TO_DEVICE) direction
+ - before *and* after handing memory to the device if the memory is
+ DMA_BIDIRECTIONAL
+
+See also dma_map_single().
+
+::
+
+ dma_addr_t
+ dma_map_single_attrs(struct device *dev, void *cpu_addr, size_t size,
+ enum dma_data_direction dir,
+ unsigned long attrs)
+
+ void
+ dma_unmap_single_attrs(struct device *dev, dma_addr_t dma_addr,
+ size_t size, enum dma_data_direction dir,
+ unsigned long attrs)
+
+ int
+ dma_map_sg_attrs(struct device *dev, struct scatterlist *sgl,
+ int nents, enum dma_data_direction dir,
+ unsigned long attrs)
+
+ void
+ dma_unmap_sg_attrs(struct device *dev, struct scatterlist *sgl,
+ int nents, enum dma_data_direction dir,
+ unsigned long attrs)
+
+The four functions above are just like the counterpart functions
+without the _attrs suffixes, except that they pass an optional
+dma_attrs.
+
+The interpretation of DMA attributes is architecture-specific, and
+each attribute should be documented in
+Documentation/core-api/dma-attributes.rst.
+
+If dma_attrs are 0, the semantics of each of these functions
+is identical to those of the corresponding function
+without the _attrs suffix. As a result dma_map_single_attrs()
+can generally replace dma_map_single(), etc.
+
+As an example of the use of the ``*_attrs`` functions, here's how
+you could pass an attribute DMA_ATTR_FOO when mapping memory
+for DMA::
+
+ #include <linux/dma-mapping.h>
+ /* DMA_ATTR_FOO should be defined in linux/dma-mapping.h and
+ * documented in Documentation/core-api/dma-attributes.rst */
+ ...
+
+ unsigned long attr;
+ attr |= DMA_ATTR_FOO;
+ ....
+ n = dma_map_sg_attrs(dev, sg, nents, DMA_TO_DEVICE, attr);
+ ....
+
+Architectures that care about DMA_ATTR_FOO would check for its
+presence in their implementations of the mapping and unmapping
+routines, e.g.:::
+
+ void whizco_dma_map_sg_attrs(struct device *dev, dma_addr_t dma_addr,
+ size_t size, enum dma_data_direction dir,
+ unsigned long attrs)
+ {
+ ....
+ if (attrs & DMA_ATTR_FOO)
+ /* twizzle the frobnozzle */
+ ....
+ }
+
+
+Part II - Non-coherent DMA allocations
+--------------------------------------
+
+These APIs allow to allocate pages that are guaranteed to be DMA addressable
+by the passed in device, but which need explicit management of memory ownership
+for the kernel vs the device.
+
+If you don't understand how cache line coherency works between a processor and
+an I/O device, you should not be using this part of the API.
+
+::
+
+ struct page *
+ dma_alloc_pages(struct device *dev, size_t size, dma_addr_t *dma_handle,
+ enum dma_data_direction dir, gfp_t gfp)
+
+This routine allocates a region of <size> bytes of non-coherent memory. It
+returns a pointer to first struct page for the region, or NULL if the
+allocation failed. The resulting struct page can be used for everything a
+struct page is suitable for.
+
+It also returns a <dma_handle> which may be cast to an unsigned integer the
+same width as the bus and given to the device as the DMA address base of
+the region.
+
+The dir parameter specified if data is read and/or written by the device,
+see dma_map_single() for details.
+
+The gfp parameter allows the caller to specify the ``GFP_`` flags (see
+kmalloc()) for the allocation, but rejects flags used to specify a memory
+zone such as GFP_DMA or GFP_HIGHMEM.
+
+Before giving the memory to the device, dma_sync_single_for_device() needs
+to be called, and before reading memory written by the device,
+dma_sync_single_for_cpu(), just like for streaming DMA mappings that are
+reused.
+
+::
+
+ void
+ dma_free_pages(struct device *dev, size_t size, struct page *page,
+ dma_addr_t dma_handle, enum dma_data_direction dir)
+
+Free a region of memory previously allocated using dma_alloc_pages().
+dev, size, dma_handle and dir must all be the same as those passed into
+dma_alloc_pages(). page must be the pointer returned by dma_alloc_pages().
+
+::
+
+ int
+ dma_mmap_pages(struct device *dev, struct vm_area_struct *vma,
+ size_t size, struct page *page)
+
+Map an allocation returned from dma_alloc_pages() into a user address space.
+dev and size must be the same as those passed into dma_alloc_pages().
+page must be the pointer returned by dma_alloc_pages().
+
+::
+
+ void *
+ dma_alloc_noncoherent(struct device *dev, size_t size,
+ dma_addr_t *dma_handle, enum dma_data_direction dir,
+ gfp_t gfp)
+
+This routine is a convenient wrapper around dma_alloc_pages that returns the
+kernel virtual address for the allocated memory instead of the page structure.
+
+::
+
+ void
+ dma_free_noncoherent(struct device *dev, size_t size, void *cpu_addr,
+ dma_addr_t dma_handle, enum dma_data_direction dir)
+
+Free a region of memory previously allocated using dma_alloc_noncoherent().
+dev, size, dma_handle and dir must all be the same as those passed into
+dma_alloc_noncoherent(). cpu_addr must be the virtual address returned by
+dma_alloc_noncoherent().
+
+::
+
+ struct sg_table *
+ dma_alloc_noncontiguous(struct device *dev, size_t size,
+ enum dma_data_direction dir, gfp_t gfp,
+ unsigned long attrs);
+
+This routine allocates <size> bytes of non-coherent and possibly non-contiguous
+memory. It returns a pointer to struct sg_table that describes the allocated
+and DMA mapped memory, or NULL if the allocation failed. The resulting memory
+can be used for struct page mapped into a scatterlist are suitable for.
+
+The return sg_table is guaranteed to have 1 single DMA mapped segment as
+indicated by sgt->nents, but it might have multiple CPU side segments as
+indicated by sgt->orig_nents.
+
+The dir parameter specified if data is read and/or written by the device,
+see dma_map_single() for details.
+
+The gfp parameter allows the caller to specify the ``GFP_`` flags (see
+kmalloc()) for the allocation, but rejects flags used to specify a memory
+zone such as GFP_DMA or GFP_HIGHMEM.
+
+The attrs argument must be either 0 or DMA_ATTR_ALLOC_SINGLE_PAGES.
+
+Before giving the memory to the device, dma_sync_sgtable_for_device() needs
+to be called, and before reading memory written by the device,
+dma_sync_sgtable_for_cpu(), just like for streaming DMA mappings that are
+reused.
+
+::
+
+ void
+ dma_free_noncontiguous(struct device *dev, size_t size,
+ struct sg_table *sgt,
+ enum dma_data_direction dir)
+
+Free memory previously allocated using dma_alloc_noncontiguous(). dev, size,
+and dir must all be the same as those passed into dma_alloc_noncontiguous().
+sgt must be the pointer returned by dma_alloc_noncontiguous().
+
+::
+
+ void *
+ dma_vmap_noncontiguous(struct device *dev, size_t size,
+ struct sg_table *sgt)
+
+Return a contiguous kernel mapping for an allocation returned from
+dma_alloc_noncontiguous(). dev and size must be the same as those passed into
+dma_alloc_noncontiguous(). sgt must be the pointer returned by
+dma_alloc_noncontiguous().
+
+Once a non-contiguous allocation is mapped using this function, the
+flush_kernel_vmap_range() and invalidate_kernel_vmap_range() APIs must be used
+to manage the coherency between the kernel mapping, the device and user space
+mappings (if any).
+
+::
+
+ void
+ dma_vunmap_noncontiguous(struct device *dev, void *vaddr)
+
+Unmap a kernel mapping returned by dma_vmap_noncontiguous(). dev must be the
+same the one passed into dma_alloc_noncontiguous(). vaddr must be the pointer
+returned by dma_vmap_noncontiguous().
+
+
+::
+
+ int
+ dma_mmap_noncontiguous(struct device *dev, struct vm_area_struct *vma,
+ size_t size, struct sg_table *sgt)
+
+Map an allocation returned from dma_alloc_noncontiguous() into a user address
+space. dev and size must be the same as those passed into
+dma_alloc_noncontiguous(). sgt must be the pointer returned by
+dma_alloc_noncontiguous().
+
+::
+
+ int
+ dma_get_cache_alignment(void)
+
+Returns the processor cache alignment. This is the absolute minimum
+alignment *and* width that you must observe when either mapping
+memory or doing partial flushes.
+
+.. note::
+
+ This API may return a number *larger* than the actual cache
+ line, but it will guarantee that one or more cache lines fit exactly
+ into the width returned by this call. It will also always be a power
+ of two for easy alignment.
+
+
+Part III - Debug drivers use of the DMA-API
+-------------------------------------------
+
+The DMA-API as described above has some constraints. DMA addresses must be
+released with the corresponding function with the same size for example. With
+the advent of hardware IOMMUs it becomes more and more important that drivers
+do not violate those constraints. In the worst case such a violation can
+result in data corruption up to destroyed filesystems.
+
+To debug drivers and find bugs in the usage of the DMA-API checking code can
+be compiled into the kernel which will tell the developer about those
+violations. If your architecture supports it you can select the "Enable
+debugging of DMA-API usage" option in your kernel configuration. Enabling this
+option has a performance impact. Do not enable it in production kernels.
+
+If you boot the resulting kernel will contain code which does some bookkeeping
+about what DMA memory was allocated for which device. If this code detects an
+error it prints a warning message with some details into your kernel log. An
+example warning message may look like this::
+
+ WARNING: at /data2/repos/linux-2.6-iommu/lib/dma-debug.c:448
+ check_unmap+0x203/0x490()
+ Hardware name:
+ forcedeth 0000:00:08.0: DMA-API: device driver frees DMA memory with wrong
+ function [device address=0x00000000640444be] [size=66 bytes] [mapped as
+ single] [unmapped as page]
+ Modules linked in: nfsd exportfs bridge stp llc r8169
+ Pid: 0, comm: swapper Tainted: G W 2.6.28-dmatest-09289-g8bb99c0 #1
+ Call Trace:
+ <IRQ> [<ffffffff80240b22>] warn_slowpath+0xf2/0x130
+ [<ffffffff80647b70>] _spin_unlock+0x10/0x30
+ [<ffffffff80537e75>] usb_hcd_link_urb_to_ep+0x75/0xc0
+ [<ffffffff80647c22>] _spin_unlock_irqrestore+0x12/0x40
+ [<ffffffff8055347f>] ohci_urb_enqueue+0x19f/0x7c0
+ [<ffffffff80252f96>] queue_work+0x56/0x60
+ [<ffffffff80237e10>] enqueue_task_fair+0x20/0x50
+ [<ffffffff80539279>] usb_hcd_submit_urb+0x379/0xbc0
+ [<ffffffff803b78c3>] cpumask_next_and+0x23/0x40
+ [<ffffffff80235177>] find_busiest_group+0x207/0x8a0
+ [<ffffffff8064784f>] _spin_lock_irqsave+0x1f/0x50
+ [<ffffffff803c7ea3>] check_unmap+0x203/0x490
+ [<ffffffff803c8259>] debug_dma_unmap_page+0x49/0x50
+ [<ffffffff80485f26>] nv_tx_done_optimized+0xc6/0x2c0
+ [<ffffffff80486c13>] nv_nic_irq_optimized+0x73/0x2b0
+ [<ffffffff8026df84>] handle_IRQ_event+0x34/0x70
+ [<ffffffff8026ffe9>] handle_edge_irq+0xc9/0x150
+ [<ffffffff8020e3ab>] do_IRQ+0xcb/0x1c0
+ [<ffffffff8020c093>] ret_from_intr+0x0/0xa
+ <EOI> <4>---[ end trace f6435a98e2a38c0e ]---
+
+The driver developer can find the driver and the device including a stacktrace
+of the DMA-API call which caused this warning.
+
+Per default only the first error will result in a warning message. All other
+errors will only silently counted. This limitation exist to prevent the code
+from flooding your kernel log. To support debugging a device driver this can
+be disabled via debugfs. See the debugfs interface documentation below for
+details.
+
+The debugfs directory for the DMA-API debugging code is called dma-api/. In
+this directory the following files can currently be found:
+
+=============================== ===============================================
+dma-api/all_errors This file contains a numeric value. If this
+ value is not equal to zero the debugging code
+ will print a warning for every error it finds
+ into the kernel log. Be careful with this
+ option, as it can easily flood your logs.
+
+dma-api/disabled This read-only file contains the character 'Y'
+ if the debugging code is disabled. This can
+ happen when it runs out of memory or if it was
+ disabled at boot time
+
+dma-api/dump This read-only file contains current DMA
+ mappings.
+
+dma-api/error_count This file is read-only and shows the total
+ numbers of errors found.
+
+dma-api/num_errors The number in this file shows how many
+ warnings will be printed to the kernel log
+ before it stops. This number is initialized to
+ one at system boot and be set by writing into
+ this file
+
+dma-api/min_free_entries This read-only file can be read to get the
+ minimum number of free dma_debug_entries the
+ allocator has ever seen. If this value goes
+ down to zero the code will attempt to increase
+ nr_total_entries to compensate.
+
+dma-api/num_free_entries The current number of free dma_debug_entries
+ in the allocator.
+
+dma-api/nr_total_entries The total number of dma_debug_entries in the
+ allocator, both free and used.
+
+dma-api/driver_filter You can write a name of a driver into this file
+ to limit the debug output to requests from that
+ particular driver. Write an empty string to
+ that file to disable the filter and see
+ all errors again.
+=============================== ===============================================
+
+If you have this code compiled into your kernel it will be enabled by default.
+If you want to boot without the bookkeeping anyway you can provide
+'dma_debug=off' as a boot parameter. This will disable DMA-API debugging.
+Notice that you can not enable it again at runtime. You have to reboot to do
+so.
+
+If you want to see debug messages only for a special device driver you can
+specify the dma_debug_driver=<drivername> parameter. This will enable the
+driver filter at boot time. The debug code will only print errors for that
+driver afterwards. This filter can be disabled or changed later using debugfs.
+
+When the code disables itself at runtime this is most likely because it ran
+out of dma_debug_entries and was unable to allocate more on-demand. 65536
+entries are preallocated at boot - if this is too low for you boot with
+'dma_debug_entries=<your_desired_number>' to overwrite the default. Note
+that the code allocates entries in batches, so the exact number of
+preallocated entries may be greater than the actual number requested. The
+code will print to the kernel log each time it has dynamically allocated
+as many entries as were initially preallocated. This is to indicate that a
+larger preallocation size may be appropriate, or if it happens continually
+that a driver may be leaking mappings.
+
+::
+
+ void
+ debug_dma_mapping_error(struct device *dev, dma_addr_t dma_addr);
+
+dma-debug interface debug_dma_mapping_error() to debug drivers that fail
+to check DMA mapping errors on addresses returned by dma_map_single() and
+dma_map_page() interfaces. This interface clears a flag set by
+debug_dma_map_page() to indicate that dma_mapping_error() has been called by
+the driver. When driver does unmap, debug_dma_unmap() checks the flag and if
+this flag is still set, prints warning message that includes call trace that
+leads up to the unmap. This interface can be called from dma_mapping_error()
+routines to enable DMA mapping error check debugging.