Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 553 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/crypto/fsl-sec4.txt b/Documentation/devicetree/bindings/crypto/fsl-sec4.txt
new file mode 100644
index 000000000..8f359f473
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/fsl-sec4.txt
@@ -0,0 +1,553 @@
+=====================================================================
+SEC 4 Device Tree Binding
+Copyright (C) 2008-2011 Freescale Semiconductor Inc.
+
+ CONTENTS
+   -Overview
+   -SEC 4 Node
+   -Job Ring Node
+   -Run Time Integrity Check (RTIC) Node
+   -Run Time Integrity Check (RTIC) Memory Node
+   -Secure Non-Volatile Storage (SNVS) Node
+   -Secure Non-Volatile Storage (SNVS) Low Power (LP) RTC Node
+   -Full Example
+
+NOTE: the SEC 4 is also known as Freescale's Cryptographic Accelerator
+Accelerator and Assurance Module (CAAM).
+
+=====================================================================
+Overview
+
+DESCRIPTION
+
+SEC 4 h/w can process requests from 2 types of sources.
+1. DPAA Queue Interface (HW interface between Queue Manager & SEC 4).
+2. Job Rings (HW interface between cores & SEC 4 registers).
+
+High Speed Data Path Configuration:
+
+HW interface between QM & SEC 4 and also BM & SEC 4, on DPAA-enabled parts
+such as the P4080.  The number of simultaneous dequeues the QI can make is
+equal to the number of Descriptor Controller (DECO) engines in a particular
+SEC version.  E.g., the SEC 4.0 in the P4080 has 5 DECOs and can thus
+dequeue from 5 subportals simultaneously.
+
+Job Ring Data Path Configuration:
+
+Each JR is located on a separate 4k page, they may (or may not) be made visible
+in the memory partition devoted to a particular core.  The P4080 has 4 JRs, so
+up to 4 JRs can be configured; and all 4 JRs process requests in parallel.
+
+=====================================================================
+SEC 4 Node
+
+Description
+
+    Node defines the base address of the SEC 4 block.
+    This block specifies the address range of all global
+    configuration registers for the SEC 4 block.  It
+    also receives interrupts from the Run Time Integrity Check
+    (RTIC) function within the SEC 4 block.
+
+PROPERTIES
+
+   - compatible
+      Usage: required
+      Value type: <string>
+      Definition: Must include "fsl,sec-v4.0"
+
+   - fsl,sec-era
+      Usage: optional
+      Value type: <u32>
+      Definition: A standard property. Define the 'ERA' of the SEC
+          device.
+
+   - #address-cells
+       Usage: required
+       Value type: <u32>
+       Definition: A standard property.  Defines the number of cells
+           for representing physical addresses in child nodes.
+
+   - #size-cells
+       Usage: required
+       Value type: <u32>
+       Definition: A standard property.  Defines the number of cells
+           for representing the size of physical addresses in
+           child nodes.
+
+   - reg
+      Usage: required
+      Value type: <prop-encoded-array>
+      Definition: A standard property.  Specifies the physical
+          address and length of the SEC4 configuration registers.
+          registers
+
+   - ranges
+       Usage: required
+       Value type: <prop-encoded-array>
+       Definition: A standard property.  Specifies the physical address
+           range of the SEC 4.0 register space (-SNVS not included).  A
+           triplet that includes the child address, parent address, &
+           length.
+
+   - interrupts
+      Usage: required
+      Value type: <prop_encoded-array>
+      Definition:  Specifies the interrupts generated by this
+           device.  The value of the interrupts property
+           consists of one interrupt specifier. The format
+           of the specifier is defined by the binding document
+           describing the node's interrupt parent.
+
+   - clocks
+      Usage: required if SEC 4.0 requires explicit enablement of clocks
+      Value type: <prop_encoded-array>
+      Definition:  A list of phandle and clock specifier pairs describing
+          the clocks required for enabling and disabling SEC 4.0.
+
+   - clock-names
+      Usage: required if SEC 4.0 requires explicit enablement of clocks
+      Value type: <string>
+      Definition: A list of clock name strings in the same order as the
+          clocks property.
+
+   Note: All other standard properties (see the Devicetree Specification)
+   are allowed but are optional.
+
+
+EXAMPLE
+
+iMX6QDL/SX requires four clocks
+
+	crypto@300000 {
+		compatible = "fsl,sec-v4.0";
+		fsl,sec-era = <2>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x300000 0x10000>;
+		ranges = <0 0x300000 0x10000>;
+		interrupt-parent = <&mpic>;
+		interrupts = <92 2>;
+		clocks = <&clks IMX6QDL_CLK_CAAM_MEM>,
+			 <&clks IMX6QDL_CLK_CAAM_ACLK>,
+			 <&clks IMX6QDL_CLK_CAAM_IPG>,
+			 <&clks IMX6QDL_CLK_EIM_SLOW>;
+		clock-names = "mem", "aclk", "ipg", "emi_slow";
+	};
+
+
+iMX6UL does only require three clocks
+
+	crypto: crypto@2140000 {
+		compatible = "fsl,sec-v4.0";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x2140000 0x3c000>;
+		ranges = <0 0x2140000 0x3c000>;
+		interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+
+		clocks = <&clks IMX6UL_CLK_CAAM_MEM>,
+			 <&clks IMX6UL_CLK_CAAM_ACLK>,
+			 <&clks IMX6UL_CLK_CAAM_IPG>;
+		clock-names = "mem", "aclk", "ipg";
+	};
+
+=====================================================================
+Job Ring (JR) Node
+
+    Child of the crypto node defines data processing interface to SEC 4
+    across the peripheral bus for purposes of processing
+    cryptographic descriptors. The specified address
+    range can be made visible to one (or more) cores.
+    The interrupt defined for this node is controlled within
+    the address range of this node.
+
+  - compatible
+      Usage: required
+      Value type: <string>
+      Definition: Must include "fsl,sec-v4.0-job-ring"
+
+  - reg
+      Usage: required
+      Value type: <prop-encoded-array>
+      Definition: Specifies a two JR parameters:  an offset from
+          the parent physical address and the length the JR registers.
+
+   - fsl,liodn
+       Usage: optional-but-recommended
+       Value type: <prop-encoded-array>
+       Definition:
+           Specifies the LIODN to be used in conjunction with
+           the ppid-to-liodn table that specifies the PPID to LIODN mapping.
+           Needed if the PAMU is used.  Value is a 12 bit value
+           where value is a LIODN ID for this JR. This property is
+           normally set by boot firmware.
+
+   - interrupts
+      Usage: required
+      Value type: <prop_encoded-array>
+      Definition:  Specifies the interrupts generated by this
+           device.  The value of the interrupts property
+           consists of one interrupt specifier. The format
+           of the specifier is defined by the binding document
+           describing the node's interrupt parent.
+
+EXAMPLE
+	jr@1000 {
+		compatible = "fsl,sec-v4.0-job-ring";
+		reg = <0x1000 0x1000>;
+		fsl,liodn = <0x081>;
+		interrupt-parent = <&mpic>;
+		interrupts = <88 2>;
+	};
+
+
+=====================================================================
+Run Time Integrity Check (RTIC) Node
+
+  Child node of the crypto node.  Defines a register space that
+  contains up to 5 sets of addresses and their lengths (sizes) that
+  will be checked at run time.  After an initial hash result is
+  calculated, these addresses are checked by HW to monitor any
+  change.  If any memory is modified, a Security Violation is
+  triggered (see SNVS definition).
+
+
+  - compatible
+      Usage: required
+      Value type: <string>
+      Definition: Must include "fsl,sec-v4.0-rtic".
+
+   - #address-cells
+       Usage: required
+       Value type: <u32>
+       Definition: A standard property.  Defines the number of cells
+           for representing physical addresses in child nodes.  Must
+           have a value of 1.
+
+   - #size-cells
+       Usage: required
+       Value type: <u32>
+       Definition: A standard property.  Defines the number of cells
+           for representing the size of physical addresses in
+           child nodes.  Must have a value of 1.
+
+  - reg
+      Usage: required
+      Value type: <prop-encoded-array>
+      Definition: A standard property.  Specifies a two parameters:
+          an offset from the parent physical address and the length
+          the SEC4 registers.
+
+   - ranges
+       Usage: required
+       Value type: <prop-encoded-array>
+       Definition: A standard property.  Specifies the physical address
+           range of the SEC 4 register space (-SNVS not included).  A
+           triplet that includes the child address, parent address, &
+           length.
+
+EXAMPLE
+	rtic@6000 {
+		compatible = "fsl,sec-v4.0-rtic";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x6000 0x100>;
+		ranges = <0x0 0x6100 0xe00>;
+	};
+
+=====================================================================
+Run Time Integrity Check (RTIC) Memory Node
+  A child node that defines individual RTIC memory regions that are used to
+  perform run-time integrity check of memory areas that should not modified.
+  The node defines a register that contains the memory address &
+  length (combined) and a second register that contains the hash result
+  in big endian format.
+
+  - compatible
+      Usage: required
+      Value type: <string>
+      Definition: Must include "fsl,sec-v4.0-rtic-memory".
+
+  - reg
+      Usage: required
+      Value type: <prop-encoded-array>
+      Definition: A standard property.  Specifies two parameters:
+          an offset from the parent physical address and the length:
+
+          1. The location of the RTIC memory address & length registers.
+          2. The location RTIC hash result.
+
+  - fsl,rtic-region
+       Usage: optional-but-recommended
+       Value type: <prop-encoded-array>
+       Definition:
+           Specifies the HW address (36 bit address) for this region
+           followed by the length of the HW partition to be checked;
+           the address is represented as a 64 bit quantity followed
+           by a 32 bit length.
+
+   - fsl,liodn
+       Usage: optional-but-recommended
+       Value type: <prop-encoded-array>
+       Definition:
+           Specifies the LIODN to be used in conjunction with
+           the ppid-to-liodn table that specifies the PPID to LIODN
+           mapping.  Needed if the PAMU is used.  Value is a 12 bit value
+           where value is a LIODN ID for this RTIC memory region. This
+           property is normally set by boot firmware.
+
+EXAMPLE
+	rtic-a@0 {
+		compatible = "fsl,sec-v4.0-rtic-memory";
+		reg = <0x00 0x20 0x100 0x80>;
+		fsl,liodn   = <0x03c>;
+		fsl,rtic-region  = <0x12345678 0x12345678 0x12345678>;
+	};
+
+=====================================================================
+Secure Non-Volatile Storage (SNVS) Node
+
+    Node defines address range and the associated
+    interrupt for the SNVS function.  This function
+    monitors security state information & reports
+    security violations. This also included rtc,
+    system power off and ON/OFF key.
+
+  - compatible
+      Usage: required
+      Value type: <string>
+      Definition: Must include "fsl,sec-v4.0-mon" and "syscon".
+
+  - reg
+      Usage: required
+      Value type: <prop-encoded-array>
+      Definition: A standard property.  Specifies the physical
+          address and length of the SEC4 configuration
+          registers.
+
+   - #address-cells
+       Usage: required
+       Value type: <u32>
+       Definition: A standard property.  Defines the number of cells
+           for representing physical addresses in child nodes.  Must
+           have a value of 1.
+
+   - #size-cells
+       Usage: required
+       Value type: <u32>
+       Definition: A standard property.  Defines the number of cells
+           for representing the size of physical addresses in
+           child nodes.  Must have a value of 1.
+
+   - ranges
+       Usage: required
+       Value type: <prop-encoded-array>
+       Definition: A standard property.  Specifies the physical address
+           range of the SNVS register space.  A triplet that includes
+           the child address, parent address, & length.
+
+   - interrupts
+      Usage: optional
+      Value type: <prop_encoded-array>
+      Definition:  Specifies the interrupts generated by this
+           device.  The value of the interrupts property
+           consists of one interrupt specifier. The format
+           of the specifier is defined by the binding document
+           describing the node's interrupt parent.
+
+EXAMPLE
+	sec_mon@314000 {
+		compatible = "fsl,sec-v4.0-mon", "syscon";
+		reg = <0x314000 0x1000>;
+		ranges = <0 0x314000 0x1000>;
+		interrupt-parent = <&mpic>;
+		interrupts = <93 2>;
+	};
+
+=====================================================================
+Secure Non-Volatile Storage (SNVS) Low Power (LP) RTC Node
+
+  A SNVS child node that defines SNVS LP RTC.
+
+  - compatible
+      Usage: required
+      Value type: <string>
+      Definition: Must include "fsl,sec-v4.0-mon-rtc-lp".
+
+  - interrupts
+      Usage: required
+      Value type: <prop_encoded-array>
+      Definition: Specifies the interrupts generated by this
+	   device.  The value of the interrupts property
+	   consists of one interrupt specifier. The format
+	   of the specifier is defined by the binding document
+	   describing the node's interrupt parent.
+
+ - regmap
+	Usage: required
+	Value type: <phandle>
+	Definition: this is phandle to the register map node.
+
+ - offset
+	Usage: option
+	value type: <u32>
+	Definition: LP register offset. default it is 0x34.
+
+   - clocks
+      Usage: optional, required if SNVS LP RTC requires explicit
+          enablement of clocks
+      Value type: <prop_encoded-array>
+      Definition:  a clock specifier describing the clock required for
+          enabling and disabling SNVS LP RTC.
+
+   - clock-names
+      Usage: optional, required if SNVS LP RTC requires explicit
+          enablement of clocks
+      Value type: <string>
+      Definition: clock name string should be "snvs-rtc".
+
+EXAMPLE
+	sec_mon_rtc_lp@1 {
+		compatible = "fsl,sec-v4.0-mon-rtc-lp";
+		interrupts = <93 2>;
+		regmap = <&snvs>;
+		offset = <0x34>;
+		clocks = <&clks IMX7D_SNVS_CLK>;
+		clock-names = "snvs-rtc";
+	};
+
+=====================================================================
+System ON/OFF key driver
+
+  The snvs-pwrkey is designed to enable POWER key function which controlled
+  by SNVS ONOFF, the driver can report the status of POWER key and wakeup
+  system if pressed after system suspend.
+
+  - compatible:
+      Usage: required
+      Value type: <string>
+      Definition: Mush include "fsl,sec-v4.0-pwrkey".
+
+  - interrupts:
+      Usage: required
+      Value type: <prop_encoded-array>
+      Definition: The SNVS ON/OFF interrupt number to the CPU(s).
+
+  - linux,keycode:
+      Usage: option
+      Value type: <int>
+      Definition: Keycode to emit, KEY_POWER by default.
+
+  - wakeup-source:
+      Usage: option
+      Value type: <boo>
+      Definition: Button can wake-up the system.
+
+ - regmap:
+      Usage: required:
+      Value type: <phandle>
+      Definition: this is phandle to the register map node.
+
+EXAMPLE:
+	snvs-pwrkey@020cc000 {
+		compatible = "fsl,sec-v4.0-pwrkey";
+		regmap = <&snvs>;
+		interrupts = <0 4 0x4>
+	        linux,keycode = <116>; /* KEY_POWER */
+		wakeup-source;
+	};
+
+=====================================================================
+FULL EXAMPLE
+
+	crypto: crypto@300000 {
+		compatible = "fsl,sec-v4.0";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x300000 0x10000>;
+		ranges = <0 0x300000 0x10000>;
+		interrupt-parent = <&mpic>;
+		interrupts = <92 2>;
+
+		sec_jr0: jr@1000 {
+			compatible = "fsl,sec-v4.0-job-ring";
+			reg = <0x1000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <88 2>;
+		};
+
+		sec_jr1: jr@2000 {
+			compatible = "fsl,sec-v4.0-job-ring";
+			reg = <0x2000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <89 2>;
+		};
+
+		sec_jr2: jr@3000 {
+			compatible = "fsl,sec-v4.0-job-ring";
+			reg = <0x3000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <90 2>;
+		};
+
+		sec_jr3: jr@4000 {
+			compatible = "fsl,sec-v4.0-job-ring";
+			reg = <0x4000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <91 2>;
+		};
+
+		rtic@6000 {
+			compatible = "fsl,sec-v4.0-rtic";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x6000 0x100>;
+			ranges = <0x0 0x6100 0xe00>;
+
+			rtic_a: rtic-a@0 {
+				compatible = "fsl,sec-v4.0-rtic-memory";
+				reg = <0x00 0x20 0x100 0x80>;
+			};
+
+			rtic_b: rtic-b@20 {
+				compatible = "fsl,sec-v4.0-rtic-memory";
+				reg = <0x20 0x20 0x200 0x80>;
+			};
+
+			rtic_c: rtic-c@40 {
+				compatible = "fsl,sec-v4.0-rtic-memory";
+				reg = <0x40 0x20 0x300 0x80>;
+			};
+
+			rtic_d: rtic-d@60 {
+				compatible = "fsl,sec-v4.0-rtic-memory";
+				reg = <0x60 0x20 0x500 0x80>;
+			};
+		};
+	};
+
+	sec_mon: sec_mon@314000 {
+		compatible = "fsl,sec-v4.0-mon";
+		reg = <0x314000 0x1000>;
+		ranges = <0 0x314000 0x1000>;
+
+		sec_mon_rtc_lp@34 {
+			compatible = "fsl,sec-v4.0-mon-rtc-lp";
+			regmap = <&sec_mon>;
+			offset = <0x34>;
+			interrupts = <93 2>;
+			clocks = <&clks IMX7D_SNVS_CLK>;
+			clock-names = "snvs-rtc";
+		};
+
+		snvs-pwrkey@020cc000 {
+			compatible = "fsl,sec-v4.0-pwrkey";
+			regmap = <&sec_mon>;
+			interrupts = <0 4 0x4>;
+			linux,keycode = <116>; /* KEY_POWER */
+			wakeup-source;
+		};
+	};
+
+=====================================================================