Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 277 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml
new file mode 100644
index 000000000..911564468
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml
@@ -0,0 +1,277 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/ti,sn65dsi86.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SN65DSI86 DSI to eDP bridge chip
+
+maintainers:
+  - Sandeep Panda <spanda@codeaurora.org>
+
+description: |
+  The Texas Instruments SN65DSI86 bridge takes MIPI DSI in and outputs eDP.
+  https://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=sn65dsi86&fileType=pdf
+
+properties:
+  compatible:
+    const: ti,sn65dsi86
+
+  reg:
+    enum: [ 0x2c, 0x2d ]
+
+  enable-gpios:
+    maxItems: 1
+    description: GPIO specifier for bridge_en pin (active high).
+
+  suspend-gpios:
+    maxItems: 1
+    description: GPIO specifier for GPIO1 pin on bridge (active low).
+
+  no-hpd:
+    type: boolean
+    description:
+      Set if the HPD line on the bridge isn't hooked up to anything or is
+      otherwise unusable.
+
+  vccio-supply:
+    description: A 1.8V supply that powers the digital IOs.
+
+  vpll-supply:
+    description: A 1.8V supply that powers the DisplayPort PLL.
+
+  vcca-supply:
+    description: A 1.2V supply that powers the analog circuits.
+
+  vcc-supply:
+    description: A 1.2V supply that powers the digital core.
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description:
+      Clock specifier for input reference clock. The reference clock rate must
+      be 12 MHz, 19.2 MHz, 26 MHz, 27 MHz or 38.4 MHz.
+
+  clock-names:
+    const: refclk
+
+  gpio-controller: true
+  '#gpio-cells':
+    const: 2
+    description:
+      First cell is pin number, second cell is flags.  GPIO pin numbers are
+      1-based to match the datasheet.  See ../../gpio/gpio.txt for more
+      information.
+
+  '#pwm-cells':
+    const: 1
+    description: See ../../pwm/pwm.yaml for description of the cell formats.
+
+  aux-bus:
+    $ref: /schemas/display/dp-aux-bus.yaml#
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Video port for MIPI DSI input
+
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Video port for eDP output (panel or connector).
+
+        properties:
+          endpoint:
+            $ref: /schemas/graph.yaml#/$defs/endpoint-base
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                oneOf:
+                  - minItems: 1
+                    maxItems: 1
+                    uniqueItems: true
+                    items:
+                      enum:
+                        - 0
+                        - 1
+                    description:
+                      If you have 1 logical lane the bridge supports routing
+                      to either port 0 or port 1.  Port 0 is suggested.
+                      See ../../media/video-interface.txt for details.
+
+                  - minItems: 2
+                    maxItems: 2
+                    uniqueItems: true
+                    items:
+                      enum:
+                        - 0
+                        - 1
+                    description:
+                      If you have 2 logical lanes the bridge supports
+                      reordering but only on physical ports 0 and 1.
+                      See ../../media/video-interface.txt for details.
+
+                  - minItems: 4
+                    maxItems: 4
+                    uniqueItems: true
+                    items:
+                      enum:
+                        - 0
+                        - 1
+                        - 2
+                        - 3
+                    description:
+                      If you have 4 logical lanes the bridge supports
+                      reordering in any way.
+                      See ../../media/video-interface.txt for details.
+
+              lane-polarities:
+                minItems: 1
+                maxItems: 4
+                items:
+                  enum:
+                    - 0
+                    - 1
+                description: See ../../media/video-interface.txt
+
+            dependencies:
+              lane-polarities: [data-lanes]
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - vccio-supply
+  - vpll-supply
+  - vcca-supply
+  - vcc-supply
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      bridge@2d {
+        compatible = "ti,sn65dsi86";
+        reg = <0x2d>;
+
+        interrupt-parent = <&tlmm>;
+        interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
+
+        enable-gpios = <&tlmm 102 GPIO_ACTIVE_HIGH>;
+
+        vpll-supply = <&src_pp1800_s4a>;
+        vccio-supply = <&src_pp1800_s4a>;
+        vcca-supply = <&src_pp1200_l2a>;
+        vcc-supply = <&src_pp1200_l2a>;
+
+        clocks = <&rpmhcc RPMH_LN_BB_CLK2>;
+        clock-names = "refclk";
+
+        no-hpd;
+
+        ports {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          port@0 {
+            reg = <0>;
+            endpoint {
+              remote-endpoint = <&dsi0_out>;
+            };
+          };
+
+          port@1 {
+            reg = <1>;
+            sn65dsi86_out: endpoint {
+              remote-endpoint = <&panel_in_edp>;
+            };
+          };
+        };
+
+        aux-bus {
+          panel {
+            compatible = "boe,nv133fhm-n62";
+            power-supply = <&pp3300_dx_edp>;
+            backlight = <&backlight>;
+            hpd-gpios = <&sn65dsi86_bridge 2 GPIO_ACTIVE_HIGH>;
+
+            port {
+              panel_in_edp: endpoint {
+                remote-endpoint = <&sn65dsi86_out>;
+              };
+            };
+          };
+        };
+      };
+    };
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      bridge@2d {
+        compatible = "ti,sn65dsi86";
+        reg = <0x2d>;
+
+        enable-gpios = <&msmgpio 33 GPIO_ACTIVE_HIGH>;
+        suspend-gpios = <&msmgpio 34 GPIO_ACTIVE_LOW>;
+
+        interrupts-extended = <&gpio3 4 IRQ_TYPE_EDGE_FALLING>;
+
+        vccio-supply = <&pm8916_l17>;
+        vcca-supply = <&pm8916_l6>;
+        vpll-supply = <&pm8916_l17>;
+        vcc-supply = <&pm8916_l6>;
+
+        clock-names = "refclk";
+        clocks = <&input_refclk>;
+
+        ports {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          port@0 {
+            reg = <0>;
+
+            edp_bridge_in: endpoint {
+              remote-endpoint = <&dsi_out>;
+            };
+          };
+
+          port@1 {
+            reg = <1>;
+
+            edp_bridge_out: endpoint {
+              data-lanes = <2 1 3 0>;
+              lane-polarities = <0 1 0 1>;
+              remote-endpoint = <&edp_panel_in>;
+            };
+          };
+        };
+      };
+    };