Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 26 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/display/himax,hx8357d.txt b/Documentation/devicetree/bindings/display/himax,hx8357d.txt
new file mode 100644
index 000000000..e641f6647
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/himax,hx8357d.txt
@@ -0,0 +1,26 @@
+Himax HX8357D display panels
+
+This binding is for display panels using a Himax HX8357D controller in SPI
+mode, such as the Adafruit 3.5" TFT for Raspberry Pi.
+
+Required properties:
+- compatible:	"adafruit,yx350hv15", "himax,hx8357d"
+- dc-gpios:	D/C pin
+- reg:		address of the panel on the SPI bus
+
+The node for this driver must be a child node of a SPI controller, hence
+all mandatory properties described in ../spi/spi-bus.txt must be specified.
+
+Optional properties:
+- rotation:	panel rotation in degrees counter clockwise (0,90,180,270)
+- backlight:	phandle of the backlight device attached to the panel
+
+Example:
+	display@0{
+		compatible = "adafruit,yx350hv15", "himax,hx8357d";
+		reg = <0>;
+		spi-max-frequency = <32000000>;
+		dc-gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>;
+		rotation = <90>;
+		backlight = <&backlight>;
+	};