Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

3 files changed, 141 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/iio/humidity/dht11.yaml b/Documentation/devicetree/bindings/iio/humidity/dht11.yaml
new file mode 100644
index 000000000..2247481d0
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/humidity/dht11.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/humidity/dht11.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: DHT11 humidity + temperature sensor
+
+maintainers:
+  - Harald Geyer <harald@ccbib.org>
+
+description: |
+   A simple and low cost module providing a non standard single GPIO based
+   interface.  It is believed the part is made by aosong but don't have
+   absolute confirmation of this, or what the aosong part number is.
+
+properties:
+  compatible:
+    const: dht11
+
+  reg:
+    maxItems: 1
+
+  gpios:
+    maxItems: 1
+    description:
+      Single, interrupt capable, GPIO used to communicate with the device.
+
+required:
+  - compatible
+  - gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    humidity_sensor {
+        compatible = "dht11";
+        gpios = <&gpio0 6 0>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/humidity/st,hts221.yaml b/Documentation/devicetree/bindings/iio/humidity/st,hts221.yaml
new file mode 100644
index 000000000..598473df7
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/humidity/st,hts221.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/humidity/st,hts221.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HTS221 STM humidity + temperature sensor
+
+maintainers:
+  - Lorenzo Bianconi <lorenzo@kernel.org>
+
+description: |
+   Humidity and temperature sensor with I2C interface and data ready
+   interrupt.
+
+properties:
+  compatible:
+    const: st,hts221
+
+  reg:
+    maxItems: 1
+
+  drive-open-drain:
+    type: boolean
+    description:
+      The interrupt/data ready line will be configured as open drain, which
+      is useful if several sensors share the same interrupt line.
+
+  vdd-supply: true
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        hts221@5f {
+            compatible = "st,hts221";
+            reg = <0x5f>;
+            interrupt-parent = <&gpio0>;
+            interrupts = <0 IRQ_TYPE_EDGE_RISING>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml b/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml
new file mode 100644
index 000000000..88384b69f
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/humidity/ti,hdc2010.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HDC2010/HDC2080 humidity and temperature iio sensors
+
+maintainers:
+  - Eugene Zaikonnikov <ez@norophonic.com>
+
+description: |
+  Relative humidity and tempereature sensors on I2C bus
+
+  Datasheets are available at:
+    http://www.ti.com/product/HDC2010/datasheet
+    http://www.ti.com/product/HDC2080/datasheet
+
+properties:
+  compatible:
+    enum:
+      - ti,hdc2010
+      - ti,hdc2080
+
+  vdd-supply: true
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c0 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      humidity@40 {
+          compatible = "ti,hdc2010";
+          reg = <0x40>;
+      };
+    };