Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 157 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdx55-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sdx55-pinctrl.yaml
new file mode 100644
index 000000000..a38090b14
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdx55-pinctrl.yaml
@@ -0,0 +1,157 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sdx55-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. SDX55 TLMM block
+
+maintainers:
+  - Vinod Koul <vkoul@kernel.org>
+
+description: |
+  This binding describes the Top Level Mode Multiplexer block found in the
+  SDX55 platform.
+
+properties:
+  compatible:
+    const: qcom,sdx55-pinctrl
+
+  reg:
+    description: Specifies the base address and size of the TLMM register space
+    maxItems: 1
+
+  interrupts:
+    description: Specifies the TLMM summary IRQ
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    description: Specifies the PIN numbers and Flags, as defined in
+      include/dt-bindings/interrupt-controller/irq.h
+    const: 2
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    description: Specifying the pin number and flags, as defined in
+      include/dt-bindings/gpio/gpio.h
+    const: 2
+
+  gpio-ranges:
+    maxItems: 1
+
+  gpio-reserved-ranges:
+    maxItems: 1
+
+#PIN CONFIGURATION NODES
+patternProperties:
+  '-pins$':
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: "/schemas/pinctrl/pincfg-node.yaml"
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-1][0-6])$"
+            - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, sdc2_data ]
+        minItems: 1
+        maxItems: 36
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins. Functions are only valid for gpio pins.
+        enum: [ adsp_ext, atest, audio_ref, bimc_dte0, bimc_dte1, blsp_i2c1,
+                blsp_i2c2, blsp_i2c3, blsp_i2c4, blsp_spi1, blsp_spi2,
+                blsp_spi3, blsp_spi4, blsp_uart1, blsp_uart2, blsp_uart3,
+                blsp_uart4, char_exec, coex_uart, coex_uart2, cri_trng,
+                cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0,
+                ebi0_wrcdc, ebi2_a, ebi2_lcd, emac_gcc0, emac_gcc1,
+                emac_pps0, emac_pps1, ext_dbg, gcc_gp1, gcc_gp2, gcc_gp3,
+                gcc_plltest, gpio, i2s_mclk, jitter_bist, ldo_en, ldo_update,
+                mgpi_clk, m_voc, native_char, native_char0, native_char1,
+                native_char2, native_char3, native_tsens, native_tsense,
+                nav_gpio, pa_indicator, pcie_clkreq, pci_e, pll_bist, pll_ref,
+                pll_test, pri_mi2s, prng_rosc, qdss_cti, qdss_gpio,
+                qdss_gpio0, qdss_gpio1, qdss_gpio2, qdss_gpio3, qdss_gpio4,
+                qdss_gpio5, qdss_gpio6, qdss_gpio7, qdss_gpio8, qdss_gpio9,
+                qdss_gpio10, qdss_gpio11, qdss_gpio12, qdss_gpio13,
+                qdss_gpio14, qdss_gpio15, qdss_stm0, qdss_stm1, qdss_stm2,
+                qdss_stm3, qdss_stm4, qdss_stm5, qdss_stm6, qdss_stm7,
+                qdss_stm8, qdss_stm9, qdss_stm10, qdss_stm11, qdss_stm12,
+                qdss_stm13, qdss_stm14, qdss_stm15, qdss_stm16, qdss_stm17,
+                qdss_stm18, qdss_stm19, qdss_stm20, qdss_stm21, qdss_stm22,
+                qdss_stm23, qdss_stm24, qdss_stm25, qdss_stm26, qdss_stm27,
+                qdss_stm28, qdss_stm29, qdss_stm30, qdss_stm31, qlink0_en,
+                qlink0_req, qlink0_wmss, qlink1_en, qlink1_req, qlink1_wmss,
+                spmi_coex, sec_mi2s, spmi_vgi, tgu_ch0, uim1_clk, uim1_data,
+                uim1_present, uim1_reset, uim2_clk, uim2_data, uim2_present,
+                uim2_reset, usb2phy_ac, vsense_trigger ]
+
+      drive-strength:
+        enum: [2, 4, 6, 8, 10, 12, 14, 16]
+        default: 2
+        description:
+          Selects the drive strength for the specified pins, in mA.
+
+      bias-pull-down: true
+
+      bias-pull-up: true
+
+      bias-disable: true
+
+      output-high: true
+
+      output-low: true
+
+    required:
+      - pins
+      - function
+
+    additionalProperties: false
+
+allOf:
+  - $ref: "pinctrl.yaml#"
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - '#interrupt-cells'
+  - gpio-controller
+  - '#gpio-cells'
+  - gpio-ranges
+
+additionalProperties: false
+
+examples:
+  - |
+        #include <dt-bindings/interrupt-controller/arm-gic.h>
+        tlmm: pinctrl@1f00000 {
+                compatible = "qcom,sdx55-pinctrl";
+                reg = <0x0f100000 0x300000>;
+                gpio-controller;
+                #gpio-cells = <2>;
+                gpio-ranges = <&tlmm 0 0 108>;
+                interrupt-controller;
+                #interrupt-cells = <2>;
+                interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>;
+
+                serial-pins {
+                        pins = "gpio8", "gpio9";
+                        function = "blsp_uart3";
+                        drive-strength = <8>;
+                        bias-disable;
+                };
+        };
+
+...